Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

7 files changed, 693 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/arch/mips/cpu/mips64/Makefile b/qemu/roms/u-boot/arch/mips/cpu/mips64/Makefile
new file mode 100644
index 000000000..899c319c9
--- /dev/null
+++ b/qemu/roms/u-boot/arch/mips/cpu/mips64/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+extra-y	= start.o
+obj-y	= cpu.o interrupts.o time.o cache.o
diff --git a/qemu/roms/u-boot/arch/mips/cpu/mips64/cache.S b/qemu/roms/u-boot/arch/mips/cpu/mips64/cache.S
new file mode 100644
index 000000000..36d868818
--- /dev/null
+++ b/qemu/roms/u-boot/arch/mips/cpu/mips64/cache.S
@@ -0,0 +1,213 @@
+/*
+ *  Cache-handling routined for MIPS CPUs
+ *
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/cacheops.h>
+
+#define RA		t9
+
+/*
+ * 16kB is the maximum size of instruction and data caches on MIPS 4K,
+ * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience.
+ *
+ * Note that the above size is the maximum size of primary cache. U-Boot
+ * doesn't have L2 cache support for now.
+ */
+#define MIPS_MAX_CACHE_SIZE	0x10000
+
+#define INDEX_BASE	CKSEG0
+
+	.macro	cache_op op addr
+	.set	push
+	.set	noreorder
+	.set	mips3
+	cache	\op, 0(\addr)
+	.set	pop
+	.endm
+
+	.macro	f_fill64 dst, offset, val
+	LONG_S	\val, (\offset +  0 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  1 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  2 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  3 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  4 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  5 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  6 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  7 * LONGSIZE)(\dst)
+#if LONGSIZE == 4
+	LONG_S	\val, (\offset +  8 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  9 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 10 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 11 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 12 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 13 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 14 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 15 * LONGSIZE)(\dst)
+#endif
+	.endm
+
+/*
+ * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz)
+ */
+LEAF(mips_init_icache)
+	blez		a1, 9f
+	mtc0		zero, CP0_TAGLO
+	/* clear tag to invalidate */
+	PTR_LI		t0, INDEX_BASE
+	PTR_ADDU	t1, t0, a1
+1:	cache_op	INDEX_STORE_TAG_I t0
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 1b
+	/* fill once, so data field parity is correct */
+	PTR_LI		t0, INDEX_BASE
+2:	cache_op	FILL t0
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 2b
+	/* invalidate again - prudent but not strictly neccessary */
+	PTR_LI		t0, INDEX_BASE
+1:	cache_op	INDEX_STORE_TAG_I t0
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 1b
+9:	jr		ra
+	END(mips_init_icache)
+
+/*
+ * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz)
+ */
+LEAF(mips_init_dcache)
+	blez		a1, 9f
+	mtc0		zero, CP0_TAGLO
+	/* clear all tags */
+	PTR_LI		t0, INDEX_BASE
+	PTR_ADDU	t1, t0, a1
+1:	cache_op	INDEX_STORE_TAG_D t0
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 1b
+	/* load from each line (in cached space) */
+	PTR_LI		t0, INDEX_BASE
+2:	LONG_L		zero, 0(t0)
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 2b
+	/* clear all tags */
+	PTR_LI		t0, INDEX_BASE
+1:	cache_op	INDEX_STORE_TAG_D t0
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 1b
+9:	jr		ra
+	END(mips_init_dcache)
+
+/*
+ * mips_cache_reset - low level initialisation of the primary caches
+ *
+ * This routine initialises the primary caches to ensure that they have good
+ * parity.  It must be called by the ROM before any cached locations are used
+ * to prevent the possibility of data with bad parity being written to memory.
+ *
+ * To initialise the instruction cache it is essential that a source of data
+ * with good parity is available. This routine will initialise an area of
+ * memory starting at location zero to be used as a source of parity.
+ *
+ * RETURNS: N/A
+ *
+ */
+NESTED(mips_cache_reset, 0, ra)
+	move	RA, ra
+	li	t2, CONFIG_SYS_ICACHE_SIZE
+	li	t3, CONFIG_SYS_DCACHE_SIZE
+	li	t8, CONFIG_SYS_CACHELINE_SIZE
+
+	li	v0, MIPS_MAX_CACHE_SIZE
+
+	/*
+	 * Now clear that much memory starting from zero.
+	 */
+	PTR_LI		a0, CKSEG1
+	PTR_ADDU	a1, a0, v0
+2:	PTR_ADDIU	a0, 64
+	f_fill64	a0, -64, zero
+	bne		a0, a1, 2b
+
+	/*
+	 * The caches are probably in an indeterminate state,
+	 * so we force good parity into them by doing an
+	 * invalidate, load/fill, invalidate for each line.
+	 */
+
+	/*
+	 * Assume bottom of RAM will generate good parity for the cache.
+	 */
+
+	/*
+	 * Initialize the I-cache first,
+	 */
+	move	a1, t2
+	move	a2, t8
+	PTR_LA	v1, mips_init_icache
+	jalr	v1
+
+	/*
+	 * then initialize D-cache.
+	 */
+	move	a1, t3
+	move	a2, t8
+	PTR_LA	v1, mips_init_dcache
+	jalr	v1
+
+	jr	RA
+	END(mips_cache_reset)
+
+/*
+ * dcache_status - get cache status
+ *
+ * RETURNS: 0 - cache disabled; 1 - cache enabled
+ *
+ */
+LEAF(dcache_status)
+	mfc0	t0, CP0_CONFIG
+	li	t1, CONF_CM_UNCACHED
+	andi	t0, t0, CONF_CM_CMASK
+	move	v0, zero
+	beq	t0, t1, 2f
+	li	v0, 1
+2:	jr	ra
+	END(dcache_status)
+
+/*
+ * dcache_disable - disable cache
+ *
+ * RETURNS: N/A
+ *
+ */
+LEAF(dcache_disable)
+	mfc0	t0, CP0_CONFIG
+	li	t1, -8
+	and	t0, t0, t1
+	ori	t0, t0, CONF_CM_UNCACHED
+	mtc0	t0, CP0_CONFIG
+	jr	ra
+	END(dcache_disable)
+
+/*
+ * dcache_enable - enable cache
+ *
+ * RETURNS: N/A
+ *
+ */
+LEAF(dcache_enable)
+	mfc0	t0, CP0_CONFIG
+	ori	t0, CONF_CM_CMASK
+	xori	t0, CONF_CM_CMASK
+	ori	t0, CONF_CM_CACHABLE_NONCOHERENT
+	mtc0	t0, CP0_CONFIG
+	jr	ra
+	END(dcache_enable)
diff --git a/qemu/roms/u-boot/arch/mips/cpu/mips64/config.mk b/qemu/roms/u-boot/arch/mips/cpu/mips64/config.mk
new file mode 100644
index 000000000..c55eb7f2e
--- /dev/null
+++ b/qemu/roms/u-boot/arch/mips/cpu/mips64/config.mk
@@ -0,0 +1,23 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+#
+# Default optimization level for MIPS64
+#
+# Note: Toolchains with binutils prior to v2.16
+# are no longer supported by U-Boot MIPS tree!
+#
+PLATFORM_CPPFLAGS += -DCONFIG_MIPS64 -march=mips64
+PLATFORM_CPPFLAGS += -mabi=64 -DCONFIG_64BIT
+ifdef CONFIG_SYS_BIG_ENDIAN
+PLATFORM_LDFLAGS  += -m elf64btsmip
+else
+PLATFORM_LDFLAGS  += -m elf64ltsmip
+endif
+
+CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 \
+			       -T $(srctree)/examples/standalone/mips64.lds
diff --git a/qemu/roms/u-boot/arch/mips/cpu/mips64/cpu.c b/qemu/roms/u-boot/arch/mips/cpu/mips64/cpu.c
new file mode 100644
index 000000000..9f45cfca5
--- /dev/null
+++ b/qemu/roms/u-boot/arch/mips/cpu/mips64/cpu.c
@@ -0,0 +1,95 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mipsregs.h>
+#include <asm/cacheops.h>
+#include <asm/reboot.h>
+
+#define cache_op(op, addr)						\
+	__asm__ __volatile__(						\
+	"	.set	push\n"						\
+	"	.set	noreorder\n"					\
+	"	.set	mips64\n"					\
+	"	cache	%0, %1\n"					\
+	"	.set	pop\n"						\
+	:								\
+	: "i" (op), "R" (*(unsigned char *)(addr)))
+
+void __attribute__((weak)) _machine_restart(void)
+{
+	fprintf(stderr, "*** reset failed ***\n");
+
+	while (1)
+		/* NOP */;
+}
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	_machine_restart();
+
+	return 0;
+}
+
+void flush_cache(ulong start_addr, ulong size)
+{
+	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+	unsigned long addr = start_addr & ~(lsize - 1);
+	unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
+
+	/* aend will be miscalculated when size is zero, so we return here */
+	if (size == 0)
+		return;
+
+	while (1) {
+		cache_op(HIT_WRITEBACK_INV_D, addr);
+		cache_op(HIT_INVALIDATE_I, addr);
+		if (addr == aend)
+			break;
+		addr += lsize;
+	}
+}
+
+void flush_dcache_range(ulong start_addr, ulong stop)
+{
+	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+	unsigned long addr = start_addr & ~(lsize - 1);
+	unsigned long aend = (stop - 1) & ~(lsize - 1);
+
+	while (1) {
+		cache_op(HIT_WRITEBACK_INV_D, addr);
+		if (addr == aend)
+			break;
+		addr += lsize;
+	}
+}
+
+void invalidate_dcache_range(ulong start_addr, ulong stop)
+{
+	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+	unsigned long addr = start_addr & ~(lsize - 1);
+	unsigned long aend = (stop - 1) & ~(lsize - 1);
+
+	while (1) {
+		cache_op(HIT_INVALIDATE_D, addr);
+		if (addr == aend)
+			break;
+		addr += lsize;
+	}
+}
+
+void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
+{
+	write_c0_entrylo0(low0);
+	write_c0_pagemask(pagemask);
+	write_c0_entrylo1(low1);
+	write_c0_entryhi(hi);
+	write_c0_index(index);
+	tlb_write_indexed();
+}
diff --git a/qemu/roms/u-boot/arch/mips/cpu/mips64/interrupts.c b/qemu/roms/u-boot/arch/mips/cpu/mips64/interrupts.c
new file mode 100644
index 000000000..275fcf569
--- /dev/null
+++ b/qemu/roms/u-boot/arch/mips/cpu/mips64/interrupts.c
@@ -0,0 +1,22 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+int interrupt_init(void)
+{
+	return 0;
+}
+
+void enable_interrupts(void)
+{
+}
+
+int disable_interrupts(void)
+{
+	return 0;
+}
diff --git a/qemu/roms/u-boot/arch/mips/cpu/mips64/start.S b/qemu/roms/u-boot/arch/mips/cpu/mips64/start.S
new file mode 100644
index 000000000..92954e1c9
--- /dev/null
+++ b/qemu/roms/u-boot/arch/mips/cpu/mips64/start.S
@@ -0,0 +1,261 @@
+/*
+ *  Startup Code for MIPS64 CPU-core
+ *
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
+#ifndef CONFIG_SYS_MIPS_CACHE_MODE
+#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
+#endif
+
+#ifdef CONFIG_SYS_LITTLE_ENDIAN
+#define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
+	(((r_type) << 24) | ((r_type2) << 16) | ((r_type3) << 8) | (ssym))
+#else
+#define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
+	((r_type) | ((r_type2) << 8) | ((r_type3) << 16) | (ssym) << 24)
+#endif
+
+	/*
+	 * For the moment disable interrupts, mark the kernel mode and
+	 * set ST0_KX so that the CPU does not spit fire when using
+	 * 64-bit addresses.
+	 */
+	.macro	setup_c0_status set clr
+	.set	push
+	mfc0	t0, CP0_STATUS
+	or	t0, ST0_CU0 | \set | 0x1f | \clr
+	xor	t0, 0x1f | \clr
+	mtc0	t0, CP0_STATUS
+	.set	noreorder
+	sll	zero, 3				# ehb
+	.set	pop
+	.endm
+
+	.set noreorder
+
+	.globl _start
+	.text
+_start:
+	/* U-boot entry point */
+	b	reset
+	 nop
+
+	.org 0x200
+	/* TLB refill, 32 bit task */
+1:	b	1b
+	 nop
+
+	.org 0x280
+	/* XTLB refill, 64 bit task */
+1:	b	1b
+	 nop
+
+	.org 0x300
+	/* Cache error exception */
+1:	b	1b
+	 nop
+
+	.org 0x380
+	/* General exception */
+1:	b	1b
+	 nop
+
+	.org 0x400
+	/* Catch interrupt exceptions */
+1:	b	1b
+	 nop
+
+	.org 0x480
+	/* EJTAG debug exception */
+1:	b	1b
+	 nop
+
+	.align 4
+reset:
+
+	/* Clear watch registers */
+	dmtc0	zero, CP0_WATCHLO
+	dmtc0	zero, CP0_WATCHHI
+
+	/* WP(Watch Pending), SW0/1 should be cleared */
+	mtc0	zero, CP0_CAUSE
+
+	setup_c0_status ST0_KX 0
+
+	/* Init Timer */
+	mtc0	zero, CP0_COUNT
+	mtc0	zero, CP0_COMPARE
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	/* CONFIG0 register */
+	dli	t0, CONF_CM_UNCACHED
+	mtc0	t0, CP0_CONFIG
+#endif
+
+	/*
+	 * Initialize $gp, force 8 byte alignment of bal instruction to forbid
+	 * the compiler to put nop's between bal and _gp. This is required to
+	 * keep _gp and ra aligned to 8 byte.
+	 */
+	.align	3
+	bal	1f
+	 nop
+	.dword	_gp
+1:
+	ld	gp, 0(ra)
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	/* Initialize any external memory */
+	dla	t9, lowlevel_init
+	jalr	t9
+	 nop
+
+	/* Initialize caches... */
+	dla	t9, mips_cache_reset
+	jalr	t9
+	 nop
+
+	/* ... and enable them */
+	dli	t0, CONFIG_SYS_MIPS_CACHE_MODE
+	mtc0	t0, CP0_CONFIG
+#endif
+
+	/* Set up temporary stack */
+	dli	sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
+
+	dla	t9, board_init_f
+	jr	t9
+	 nop
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * a0 = addr_sp
+ * a1 = gd
+ * a2 = destination address
+ */
+	.globl	relocate_code
+	.ent	relocate_code
+relocate_code:
+	move	sp, a0			# set new stack pointer
+
+	move	s0, a1			# save gd in s0
+	move	s2, a2			# save destination address in s2
+
+	dli	t0, CONFIG_SYS_MONITOR_BASE
+	dsub	s1, s2, t0		# s1 <-- relocation offset
+
+	dla	t3, in_ram
+	ld	t2, -24(t3)		# t2 <-- __image_copy_end
+	move	t1, a2
+
+	dadd	gp, s1			# adjust gp
+
+	/*
+	 * t0 = source address
+	 * t1 = target address
+	 * t2 = source end address
+	 */
+1:
+	lw	t3, 0(t0)
+	sw	t3, 0(t1)
+	daddu	t0, 4
+	blt	t0, t2, 1b
+	 daddu	t1, 4
+
+	/* If caches were enabled, we would have to flush them here. */
+	dsub	a1, t1, s2		# a1 <-- size
+	dla	t9, flush_cache
+	jalr	t9
+	 move	a0, s2			# a0 <-- destination address
+
+	/* Jump to where we've relocated ourselves */
+	daddi	t0, s2, in_ram - _start
+	jr	t0
+	 nop
+
+	.dword	__rel_dyn_end
+	.dword	__rel_dyn_start
+	.dword	__image_copy_end
+	.dword	_GLOBAL_OFFSET_TABLE_
+	.dword	num_got_entries
+
+in_ram:
+	/*
+	 * Now we want to update GOT.
+	 *
+	 * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
+	 * generated by GNU ld. Skip these reserved entries from relocation.
+	 */
+	ld	t3, -8(t0)		# t3 <-- num_got_entries
+	ld	t8, -16(t0)		# t8 <-- _GLOBAL_OFFSET_TABLE_
+	dadd	t8, s1			# t8 now holds relocated _G_O_T_
+	daddi	t8, t8, 16		# skipping first two entries
+	dli	t2, 2
+1:
+	ld	t1, 0(t8)
+	beqz	t1, 2f
+	 dadd	t1, s1
+	sd	t1, 0(t8)
+2:
+	daddi	t2, 1
+	blt	t2, t3, 1b
+	 daddi	t8, 8
+
+	/* Update dynamic relocations */
+	ld	t1, -32(t0)		# t1 <-- __rel_dyn_start
+	ld	t2, -40(t0)		# t2 <-- __rel_dyn_end
+
+	b	2f			# skip first reserved entry
+	 daddi	t1, 16
+
+1:
+	lw	t8, -4(t1)		# t8 <-- relocation info
+
+	dli	t3, MIPS64_R_INFO(0x00, 0x00, 0x12, 0x03)
+	bne	t8, t3, 2f		# skip non R_MIPS_REL32 entries
+	 nop
+
+	ld	t3, -16(t1)		# t3 <-- location to fix up in FLASH
+
+	ld	t8, 0(t3)		# t8 <-- original pointer
+	dadd	t8, s1			# t8 <-- adjusted pointer
+
+	dadd	t3, s1			# t3 <-- location to fix up in RAM
+	sd	t8, 0(t3)
+
+2:
+	blt	t1, t2, 1b
+	 daddi	t1, 16			# each rel.dyn entry is 16 bytes
+
+	/*
+	 * Clear BSS
+	 *
+	 * GOT is now relocated. Thus __bss_start and __bss_end can be
+	 * accessed directly via $gp.
+	 */
+	dla	t1, __bss_start		# t1 <-- __bss_start
+	dla	t2, __bss_end		# t2 <-- __bss_end
+
+1:
+	sd	zero, 0(t1)
+	blt	t1, t2, 1b
+	 daddi	t1, 8
+
+	move	a0, s0			# a0 <-- gd
+	dla	t9, board_init_r
+	jr	t9
+	 move	a1, s2
+
+	.end	relocate_code
diff --git a/qemu/roms/u-boot/arch/mips/cpu/mips64/time.c b/qemu/roms/u-boot/arch/mips/cpu/mips64/time.c
new file mode 100644
index 000000000..0497acf4a
--- /dev/null
+++ b/qemu/roms/u-boot/arch/mips/cpu/mips64/time.c
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mipsregs.h>
+
+static unsigned long timestamp;
+
+/* how many counter cycles in a jiffy */
+#define CYCLES_PER_JIFFY	 \
+	(CONFIG_SYS_MIPS_TIMER_FREQ + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ
+
+/*
+ * timer without interrupts
+ */
+
+int timer_init(void)
+{
+	/* Set up the timer for the first expiration. */
+	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
+
+	return 0;
+}
+
+ulong get_timer(ulong base)
+{
+	unsigned int count;
+	unsigned int expirelo = read_c0_compare();
+
+	/* Check to see if we have missed any timestamps. */
+	count = read_c0_count();
+	while ((count - expirelo) < 0x7fffffff) {
+		expirelo += CYCLES_PER_JIFFY;
+		timestamp++;
+	}
+	write_c0_compare(expirelo);
+
+	return timestamp - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	unsigned int tmo;
+
+	tmo = read_c0_count() + (usec * (CONFIG_SYS_MIPS_TIMER_FREQ / 1000000));
+	while ((tmo - read_c0_count()) < 0x7fffffff)
+		/*NOP*/;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On MIPS it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On MIPS it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}