Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 278 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/arch/avr32/cpu/at32ap700x/portmux.c b/qemu/roms/u-boot/arch/avr32/cpu/at32ap700x/portmux.c
new file mode 100644
index 000000000..58327bac8
--- /dev/null
+++ b/qemu/roms/u-boot/arch/avr32/cpu/at32ap700x/portmux.c
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2006, 2008 Atmel Corporation
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/chip-features.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/portmux.h>
+
+/*
+ * Lots of small functions here. We depend on --gc-sections getting
+ * rid of the ones we don't need.
+ */
+void portmux_enable_ebi(unsigned int bus_width, unsigned int addr_width,
+		unsigned long flags, unsigned long drive_strength)
+{
+	unsigned long porte_mask = 0;
+
+	if (bus_width > 16)
+		portmux_select_peripheral(PORTMUX_PORT_E, 0xffff,
+				PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+	if (addr_width > 23)
+		porte_mask |= (((1 << (addr_width - 23)) - 1) & 7) << 16;
+	if (flags & PORTMUX_EBI_CS(2))
+		porte_mask |= 1 << 25;
+	if (flags & PORTMUX_EBI_CS(4))
+		porte_mask |= 1 << 21;
+	if (flags & PORTMUX_EBI_CS(5))
+		porte_mask |= 1 << 22;
+	if (flags & (PORTMUX_EBI_CF(0) | PORTMUX_EBI_CF(1)))
+		porte_mask |= (1 << 19) | (1 << 20) | (1 << 23);
+
+	portmux_select_peripheral(PORTMUX_PORT_E, porte_mask,
+			PORTMUX_FUNC_A, 0);
+
+	if (flags & PORTMUX_EBI_NWAIT)
+		portmux_select_peripheral(PORTMUX_PORT_E, 1 << 24,
+				PORTMUX_FUNC_A, PORTMUX_PULL_UP);
+}
+
+#ifdef AT32AP700x_CHIP_HAS_MACB
+void portmux_enable_macb0(unsigned long flags, unsigned long drive_strength)
+{
+	unsigned long portc_mask;
+
+	portc_mask = (1 << 3)	/* TXD0	*/
+		| (1 << 4)	/* TXD1	*/
+		| (1 << 7)	/* TXEN	*/
+		| (1 << 8)	/* TXCK */
+		| (1 << 9)	/* RXD0	*/
+		| (1 << 10)	/* RXD1	*/
+		| (1 << 13)	/* RXER	*/
+		| (1 << 15)	/* RXDV	*/
+		| (1 << 16)	/* MDC	*/
+		| (1 << 17);	/* MDIO	*/
+
+	if (flags & PORTMUX_MACB_MII)
+		portc_mask |= (1 << 0)	/* COL	*/
+			| (1 << 1)	/* CRS	*/
+			| (1 << 2)	/* TXER	*/
+			| (1 << 5)	/* TXD2	*/
+			| (1 << 6)	/* TXD3 */
+			| (1 << 11)	/* RXD2	*/
+			| (1 << 12)	/* RXD3	*/
+			| (1 << 14);	/* RXCK	*/
+
+	if (flags & PORTMUX_MACB_SPEED)
+		portc_mask |= (1 << 18);/* SPD	*/
+
+	/* REVISIT: Some pins are probably pure outputs */
+	portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
+			PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+}
+
+void portmux_enable_macb1(unsigned long flags, unsigned long drive_strength)
+{
+	unsigned long portc_mask = 0;
+	unsigned long portd_mask;
+
+	portd_mask = (1 << 13)	/* TXD0	*/
+		| (1 << 14)	/* TXD1	*/
+		| (1 << 11)	/* TXEN	*/
+		| (1 << 12)	/* TXCK */
+		| (1 << 10)	/* RXD0	*/
+		| (1 << 6)	/* RXD1	*/
+		| (1 << 5)	/* RXER	*/
+		| (1 << 4)	/* RXDV	*/
+		| (1 << 3)	/* MDC	*/
+		| (1 << 2);	/* MDIO	*/
+
+	if (flags & PORTMUX_MACB_MII)
+		portc_mask = (1 << 19)	/* COL	*/
+			| (1 << 23)	/* CRS	*/
+			| (1 << 26)	/* TXER	*/
+			| (1 << 27)	/* TXD2	*/
+			| (1 << 28)	/* TXD3 */
+			| (1 << 29)	/* RXD2	*/
+			| (1 << 30)	/* RXD3	*/
+			| (1 << 24);	/* RXCK	*/
+
+	if (flags & PORTMUX_MACB_SPEED)
+		portd_mask |= (1 << 15);/* SPD	*/
+
+	/* REVISIT: Some pins are probably pure outputs */
+	portmux_select_peripheral(PORTMUX_PORT_D, portd_mask,
+			PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+	portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
+			PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+}
+#endif
+
+#ifdef AT32AP700x_CHIP_HAS_MMCI
+void portmux_enable_mmci(unsigned int slot, unsigned long flags,
+		unsigned long drive_strength)
+{
+	unsigned long mask;
+	unsigned long portmux_flags = PORTMUX_PULL_UP;
+
+	/* First, the common CLK signal. It doesn't need a pull-up */
+	portmux_select_peripheral(PORTMUX_PORT_A, 1 << 10,
+			PORTMUX_FUNC_A, 0);
+
+	if (flags & PORTMUX_MMCI_EXT_PULLUP)
+		portmux_flags = 0;
+
+	/* Then, the per-slot signals */
+	switch (slot) {
+	case 0:
+		mask = (1 << 11) | (1 << 12);	/* CMD and DATA0 */
+		if (flags & PORTMUX_MMCI_4BIT)
+			/* DATA1..DATA3 */
+			mask |= (1 << 13) | (1 << 14) | (1 << 15);
+		portmux_select_peripheral(PORTMUX_PORT_A, mask,
+				PORTMUX_FUNC_A, portmux_flags);
+		break;
+	case 1:
+		mask = (1 << 6) | (1 << 7);	/* CMD and DATA0 */
+		if (flags & PORTMUX_MMCI_4BIT)
+			/* DATA1..DATA3 */
+			mask |= (1 << 8) | (1 << 9) | (1 << 10);
+		portmux_select_peripheral(PORTMUX_PORT_B, mask,
+				PORTMUX_FUNC_B, portmux_flags);
+		break;
+	}
+}
+#endif
+
+#ifdef AT32AP700x_CHIP_HAS_SPI
+void portmux_enable_spi0(unsigned long cs_mask, unsigned long drive_strength)
+{
+	unsigned long pin_mask;
+
+	/* MOSI and SCK */
+	portmux_select_peripheral(PORTMUX_PORT_A, (1 << 1) | (1 << 2),
+			PORTMUX_FUNC_A, 0);
+	/* MISO may float */
+	portmux_select_peripheral(PORTMUX_PORT_A, 1 << 0,
+			PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+
+	/* Set up NPCSx as GPIO outputs, initially high */
+	pin_mask = (cs_mask & 7) << 3;
+	if (cs_mask & (1 << 3))
+		pin_mask |= 1 << 20;
+
+	portmux_select_gpio(PORTMUX_PORT_A, pin_mask,
+			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
+}
+
+void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength)
+{
+	/* MOSI and SCK */
+	portmux_select_peripheral(PORTMUX_PORT_B, (1 << 1) | (1 << 5),
+			PORTMUX_FUNC_B, 0);
+	/* MISO may float */
+	portmux_select_peripheral(PORTMUX_PORT_B, 1 << 0,
+			PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+
+	/* Set up NPCSx as GPIO outputs, initially high */
+	portmux_select_gpio(PORTMUX_PORT_B, (cs_mask & 7) << 2,
+			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
+	portmux_select_gpio(PORTMUX_PORT_A, (cs_mask & 8) << (27 - 3),
+			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
+}
+#endif
+
+#ifdef AT32AP700x_CHIP_HAS_LCDC
+void portmux_enable_lcdc(int pin_config)
+{
+	unsigned long portc_mask = 0;
+	unsigned long portd_mask = 0;
+	unsigned long porte_mask = 0;
+
+	switch (pin_config) {
+	case 0:
+		portc_mask = (1 << 19)	/* CC     */
+			| (1 << 20)	/* HSYNC  */
+			| (1 << 21)	/* PCLK   */
+			| (1 << 22)	/* VSYNC  */
+			| (1 << 23)	/* DVAL   */
+			| (1 << 24)	/* MODE   */
+			| (1 << 25)	/* PWR    */
+			| (1 << 26)	/* DATA0  */
+			| (1 << 27)	/* DATA1  */
+			| (1 << 28)	/* DATA2  */
+			| (1 << 29)	/* DATA3  */
+			| (1 << 30)	/* DATA4  */
+			| (1 << 31);	/* DATA5  */
+
+		portd_mask = (1 << 0)	/* DATA6  */
+			| (1 << 1)	/* DATA7  */
+			| (1 << 2)	/* DATA8  */
+			| (1 << 3)	/* DATA9  */
+			| (1 << 4)	/* DATA10 */
+			| (1 << 5)	/* DATA11 */
+			| (1 << 6)	/* DATA12 */
+			| (1 << 7)	/* DATA13 */
+			| (1 << 8)	/* DATA14 */
+			| (1 << 9)	/* DATA15 */
+			| (1 << 10)	/* DATA16 */
+			| (1 << 11)	/* DATA17 */
+			| (1 << 12)	/* DATA18 */
+			| (1 << 13)	/* DATA19 */
+			| (1 << 14)	/* DATA20 */
+			| (1 << 15)	/* DATA21 */
+			| (1 << 16)	/* DATA22 */
+			| (1 << 17);	/* DATA23 */
+		break;
+
+	case 1:
+		portc_mask = (1 << 20)	/* HSYNC  */
+			| (1 << 21)	/* PCLK   */
+			| (1 << 22)	/* VSYNC  */
+			| (1 << 25)	/* PWR    */
+			| (1 << 31);	/* DATA5  */
+
+		portd_mask = (1 << 0)	/* DATA6  */
+			| (1 << 1)	/* DATA7  */
+			| (1 << 7)	/* DATA13 */
+			| (1 << 8)	/* DATA14 */
+			| (1 << 9)	/* DATA15 */
+			| (1 << 16)	/* DATA22 */
+			| (1 << 17);	/* DATA23 */
+
+		porte_mask = (1 << 0)	/* CC     */
+			| (1 << 1)	/* DVAL   */
+			| (1 << 2)	/* MODE   */
+			| (1 << 3)	/* DATA0  */
+			| (1 << 4)	/* DATA1  */
+			| (1 << 5)	/* DATA2  */
+			| (1 << 6)	/* DATA3  */
+			| (1 << 7)	/* DATA4  */
+			| (1 << 8)	/* DATA8  */
+			| (1 << 9)	/* DATA9  */
+			| (1 << 10)	/* DATA10 */
+			| (1 << 11)	/* DATA11 */
+			| (1 << 12)	/* DATA12 */
+			| (1 << 13)	/* DATA16 */
+			| (1 << 14)	/* DATA17 */
+			| (1 << 15)	/* DATA18 */
+			| (1 << 16)	/* DATA19 */
+			| (1 << 17)	/* DATA20 */
+			| (1 << 18);	/* DATA21 */
+		break;
+	}
+
+	/* REVISIT: Some pins are probably pure outputs */
+	portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
+			PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+	portmux_select_peripheral(PORTMUX_PORT_D, portd_mask,
+			PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+	portmux_select_peripheral(PORTMUX_PORT_E, porte_mask,
+			PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+}
+#endif