These changes are the raw update to qemu-2.6.

Collission happened in the following patches:

migration: do cleanup operation after completion(738df5b9)
Bug fix.(1750c932f86)
kvmclock: add a new function to update env->tsc.(b52baab2)

The code provided by the patches was already in the upstreamed
version.

Change-Id: I3cc11841a6a76ae20887b2e245710199e1ea7f9a
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 154 insertions, 0 deletions

diff --git a/qemu/roms/ipxe/src/drivers/usb/usbkbd.h b/qemu/roms/ipxe/src/drivers/usb/usbkbd.h
new file mode 100644
index 000000000..7eab24e46
--- /dev/null
+++ b/qemu/roms/ipxe/src/drivers/usb/usbkbd.h
@@ -0,0 +1,154 @@
+#ifndef _USBKBD_H
+#define _USBKBD_H
+
+/** @file
+ *
+ * USB keyboard driver
+ *
+ */
+
+FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
+
+#include <assert.h>
+#include <ipxe/usb.h>
+#include <ipxe/usbhid.h>
+
+/** Keyboard protocol */
+#define USBKBD_PROTOCOL 1
+
+/** A USB keyboard report */
+struct usb_keyboard_report {
+	/** Modifier keys */
+	uint8_t modifiers;
+	/** Reserved */
+	uint8_t reserved;
+	/** Keycodes */
+	uint8_t keycode[6];
+} __attribute__ (( packed ));
+
+/** USB modifier keys */
+enum usb_keyboard_modifier {
+	/** Left Ctrl key */
+	USBKBD_CTRL_LEFT = 0x01,
+	/** Left Shift key */
+	USBKBD_SHIFT_LEFT = 0x02,
+	/** Left Alt key */
+	USBKBD_ALT_LEFT = 0x04,
+	/** Left GUI key */
+	USBKBD_GUI_LEFT = 0x08,
+	/** Right Ctrl key */
+	USBKBD_CTRL_RIGHT = 0x10,
+	/** Right Shift key */
+	USBKBD_SHIFT_RIGHT = 0x20,
+	/** Right Alt key */
+	USBKBD_ALT_RIGHT = 0x40,
+	/** Right GUI key */
+	USBKBD_GUI_RIGHT = 0x80,
+};
+
+/** Either Ctrl key */
+#define USBKBD_CTRL ( USBKBD_CTRL_LEFT | USBKBD_CTRL_RIGHT )
+
+/** Either Shift key */
+#define USBKBD_SHIFT ( USBKBD_SHIFT_LEFT | USBKBD_SHIFT_RIGHT )
+
+/** Either Alt key */
+#define USBKBD_ALT ( USBKBD_ALT_LEFT | USBKBD_ALT_RIGHT )
+
+/** Either GUI key */
+#define USBKBD_GUI ( USBKBD_GUI_LEFT | USBKBD_GUI_RIGHT )
+
+/** USB keycodes */
+enum usb_keycode {
+	USBKBD_KEY_A = 0x04,
+	USBKBD_KEY_Z = 0x1d,
+	USBKBD_KEY_1 = 0x1e,
+	USBKBD_KEY_0 = 0x27,
+	USBKBD_KEY_ENTER = 0x28,
+	USBKBD_KEY_SPACE = 0x2c,
+	USBKBD_KEY_MINUS = 0x2d,
+	USBKBD_KEY_SLASH = 0x38,
+	USBKBD_KEY_CAPSLOCK = 0x39,
+	USBKBD_KEY_UP = 0x52,
+};
+
+/** Keyboard idle duration (in 4ms units)
+ *
+ * This is a policy decision.  We choose to use an autorepeat rate of
+ * approximately 40ms.
+ */
+#define USBKBD_IDLE_DURATION 10 /* 10 x 4ms = 40ms */
+
+/** Keyboard auto-repeat hold-off (in units of USBKBD_IDLE_DURATION)
+ *
+ * This is a policy decision.  We choose to use an autorepeat delay of
+ * approximately 500ms.
+ */
+#define USBKBD_HOLDOFF 12 /* 12 x 40ms = 480ms */
+
+/** Interrupt endpoint maximum fill level
+ *
+ * When idling, we are likely to poll the USB endpoint at only the
+ * 18.2Hz system timer tick rate.  With a typical observed bInterval
+ * of 10ms (which will be rounded down to 8ms by the HCI drivers),
+ * this gives approximately 7 completions per poll.
+ */
+#define USBKBD_INTR_MAX_FILL 8
+
+/** Keyboard buffer size
+ *
+ * Must be a power of two.
+ */
+#define USBKBD_BUFSIZE 8
+
+/** A USB keyboard device */
+struct usb_keyboard {
+	/** Name */
+	const char *name;
+	/** List of all USB keyboards */
+	struct list_head list;
+
+	/** USB bus */
+	struct usb_bus *bus;
+	/** USB human interface device */
+	struct usb_hid hid;
+
+	/** Most recent keyboard report */
+	struct usb_keyboard_report report;
+	/** Most recently pressed non-modifier key (if any) */
+	unsigned int keycode;
+	/** Autorepeat hold-off time (in number of completions reported) */
+	unsigned int holdoff;
+
+	/** Keyboard buffer
+	 *
+	 * This stores iPXE key values.
+	 */
+	unsigned int key[USBKBD_BUFSIZE];
+	/** Keyboard buffer producer counter */
+	unsigned int prod;
+	/** Keyboard buffer consumer counter */
+	unsigned int cons;
+	/** Keyboard buffer sub-consumer counter
+	 *
+	 * This represents the index within the ANSI escape sequence
+	 * corresponding to an iPXE key value.
+	 */
+	unsigned int subcons;
+};
+
+/**
+ * Calculate keyboard buffer fill level
+ *
+ * @v kbd		USB keyboard
+ * @ret fill		Keyboard buffer fill level
+ */
+static inline __attribute__ (( always_inline )) unsigned int
+usbkbd_fill ( struct usb_keyboard *kbd ) {
+	unsigned int fill = ( kbd->prod - kbd->cons );
+
+	assert ( fill <= USBKBD_BUFSIZE );
+	return fill;
+}
+
+#endif /* _USBKBD_H */