diff options
author | 2017-04-25 03:31:15 -0700 | |
---|---|---|
committer | 2017-05-22 06:48:08 +0000 | |
commit | bb756eebdac6fd24e8919e2c43f7d2c8c4091f59 (patch) | |
tree | ca11e03542edf2d8f631efeca5e1626d211107e3 /qemu/roms/ipxe/src/drivers/net/bnx2.c | |
parent | a14b48d18a9ed03ec191cf16b162206998a895ce (diff) |
Adding qemu as a submodule of KVMFORNFV
This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>
Diffstat (limited to 'qemu/roms/ipxe/src/drivers/net/bnx2.c')
-rw-r--r-- | qemu/roms/ipxe/src/drivers/net/bnx2.c | 2694 |
1 files changed, 0 insertions, 2694 deletions
diff --git a/qemu/roms/ipxe/src/drivers/net/bnx2.c b/qemu/roms/ipxe/src/drivers/net/bnx2.c deleted file mode 100644 index 4ebcc52a9..000000000 --- a/qemu/roms/ipxe/src/drivers/net/bnx2.c +++ /dev/null @@ -1,2694 +0,0 @@ -/* bnx2.c: Broadcom NX2 network driver. - * - * Copyright (c) 2004, 2005, 2006 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation. - * - * Written by: Michael Chan (mchan@broadcom.com) - * - * Etherboot port by Ryan Jackson (rjackson@lnxi.com), based on driver - * version 1.4.40 from linux 2.6.17 - */ - -FILE_LICENCE ( GPL_ANY ); - -#include "etherboot.h" -#include "nic.h" -#include <errno.h> -#include <ipxe/pci.h> -#include <ipxe/ethernet.h> -#include "string.h" -#include <mii.h> -#include "bnx2.h" -#include "bnx2_fw.h" - -#if 0 -/* Dummy defines for error handling */ -#define EBUSY 1 -#define ENODEV 2 -#define EINVAL 3 -#define ENOMEM 4 -#define EIO 5 -#endif - -/* The bnx2 seems to be picky about the alignment of the receive buffers - * and possibly the status block. - */ -static struct bss { - struct tx_bd tx_desc_ring[TX_DESC_CNT]; - struct rx_bd rx_desc_ring[RX_DESC_CNT]; - unsigned char rx_buf[RX_BUF_CNT][RX_BUF_SIZE]; - struct status_block status_blk; - struct statistics_block stats_blk; -} bnx2_bss; - -static struct bnx2 bnx2; - -static struct flash_spec flash_table[] = -{ - /* Slow EEPROM */ - {0x00000000, 0x40830380, 0x009f0081, 0xa184a053, 0xaf000400, - 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE, - SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE, - "EEPROM - slow"}, - /* Expansion entry 0001 */ - {0x08000002, 0x4b808201, 0x00050081, 0x03840253, 0xaf020406, - 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, - SAIFUN_FLASH_BYTE_ADDR_MASK, 0, - "Entry 0001"}, - /* Saifun SA25F010 (non-buffered flash) */ - /* strap, cfg1, & write1 need updates */ - {0x04000001, 0x47808201, 0x00050081, 0x03840253, 0xaf020406, - 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, - SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*2, - "Non-buffered flash (128kB)"}, - /* Saifun SA25F020 (non-buffered flash) */ - /* strap, cfg1, & write1 need updates */ - {0x0c000003, 0x4f808201, 0x00050081, 0x03840253, 0xaf020406, - 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, - SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*4, - "Non-buffered flash (256kB)"}, - /* Expansion entry 0100 */ - {0x11000000, 0x53808201, 0x00050081, 0x03840253, 0xaf020406, - 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, - SAIFUN_FLASH_BYTE_ADDR_MASK, 0, - "Entry 0100"}, - /* Entry 0101: ST M45PE10 (non-buffered flash, TetonII B0) */ - {0x19000002, 0x5b808201, 0x000500db, 0x03840253, 0xaf020406, - 0, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE, - ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*2, - "Entry 0101: ST M45PE10 (128kB non-bufferred)"}, - /* Entry 0110: ST M45PE20 (non-buffered flash)*/ - {0x15000001, 0x57808201, 0x000500db, 0x03840253, 0xaf020406, - 0, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE, - ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*4, - "Entry 0110: ST M45PE20 (256kB non-bufferred)"}, - /* Saifun SA25F005 (non-buffered flash) */ - /* strap, cfg1, & write1 need updates */ - {0x1d000003, 0x5f808201, 0x00050081, 0x03840253, 0xaf020406, - 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, - SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE, - "Non-buffered flash (64kB)"}, - /* Fast EEPROM */ - {0x22000000, 0x62808380, 0x009f0081, 0xa184a053, 0xaf000400, - 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE, - SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE, - "EEPROM - fast"}, - /* Expansion entry 1001 */ - {0x2a000002, 0x6b808201, 0x00050081, 0x03840253, 0xaf020406, - 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, - SAIFUN_FLASH_BYTE_ADDR_MASK, 0, - "Entry 1001"}, - /* Expansion entry 1010 */ - {0x26000001, 0x67808201, 0x00050081, 0x03840253, 0xaf020406, - 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, - SAIFUN_FLASH_BYTE_ADDR_MASK, 0, - "Entry 1010"}, - /* ATMEL AT45DB011B (buffered flash) */ - {0x2e000003, 0x6e808273, 0x00570081, 0x68848353, 0xaf000400, - 1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE, - BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE, - "Buffered flash (128kB)"}, - /* Expansion entry 1100 */ - {0x33000000, 0x73808201, 0x00050081, 0x03840253, 0xaf020406, - 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, - SAIFUN_FLASH_BYTE_ADDR_MASK, 0, - "Entry 1100"}, - /* Expansion entry 1101 */ - {0x3b000002, 0x7b808201, 0x00050081, 0x03840253, 0xaf020406, - 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, - SAIFUN_FLASH_BYTE_ADDR_MASK, 0, - "Entry 1101"}, - /* Ateml Expansion entry 1110 */ - {0x37000001, 0x76808273, 0x00570081, 0x68848353, 0xaf000400, - 1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE, - BUFFERED_FLASH_BYTE_ADDR_MASK, 0, - "Entry 1110 (Atmel)"}, - /* ATMEL AT45DB021B (buffered flash) */ - {0x3f000003, 0x7e808273, 0x00570081, 0x68848353, 0xaf000400, - 1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE, - BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE*2, - "Buffered flash (256kB)"}, -}; - -static u32 -bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset) -{ - REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, offset); - return (REG_RD(bp, BNX2_PCICFG_REG_WINDOW)); -} - -static void -bnx2_reg_wr_ind(struct bnx2 *bp, u32 offset, u32 val) -{ - REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, offset); - REG_WR(bp, BNX2_PCICFG_REG_WINDOW, val); -} - -static void -bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val) -{ - offset += cid_addr; - REG_WR(bp, BNX2_CTX_DATA_ADR, offset); - REG_WR(bp, BNX2_CTX_DATA, val); -} - -static int -bnx2_read_phy(struct bnx2 *bp, u32 reg, u32 *val) -{ - u32 val1; - int i, ret; - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); - val1 &= ~BNX2_EMAC_MDIO_MODE_AUTO_POLL; - - REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); - REG_RD(bp, BNX2_EMAC_MDIO_MODE); - - udelay(40); - } - - val1 = (bp->phy_addr << 21) | (reg << 16) | - BNX2_EMAC_MDIO_COMM_COMMAND_READ | BNX2_EMAC_MDIO_COMM_DISEXT | - BNX2_EMAC_MDIO_COMM_START_BUSY; - REG_WR(bp, BNX2_EMAC_MDIO_COMM, val1); - - for (i = 0; i < 50; i++) { - udelay(10); - - val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); - if (!(val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - - val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); - val1 &= BNX2_EMAC_MDIO_COMM_DATA; - - break; - } - } - - if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY) { - *val = 0x0; - ret = -EBUSY; - } - else { - *val = val1; - ret = 0; - } - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); - val1 |= BNX2_EMAC_MDIO_MODE_AUTO_POLL; - - REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); - REG_RD(bp, BNX2_EMAC_MDIO_MODE); - - udelay(40); - } - - return ret; -} - -static int -bnx2_write_phy(struct bnx2 *bp, u32 reg, u32 val) -{ - u32 val1; - int i, ret; - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); - val1 &= ~BNX2_EMAC_MDIO_MODE_AUTO_POLL; - - REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); - REG_RD(bp, BNX2_EMAC_MDIO_MODE); - - udelay(40); - } - - val1 = (bp->phy_addr << 21) | (reg << 16) | val | - BNX2_EMAC_MDIO_COMM_COMMAND_WRITE | - BNX2_EMAC_MDIO_COMM_START_BUSY | BNX2_EMAC_MDIO_COMM_DISEXT; - REG_WR(bp, BNX2_EMAC_MDIO_COMM, val1); - - for (i = 0; i < 50; i++) { - udelay(10); - - val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); - if (!(val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - - if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY) - ret = -EBUSY; - else - ret = 0; - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); - val1 |= BNX2_EMAC_MDIO_MODE_AUTO_POLL; - - REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); - REG_RD(bp, BNX2_EMAC_MDIO_MODE); - - udelay(40); - } - - return ret; -} - -static void -bnx2_disable_int(struct bnx2 *bp) -{ - REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, - BNX2_PCICFG_INT_ACK_CMD_MASK_INT); - REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD); - -} - -static int -bnx2_alloc_mem(struct bnx2 *bp) -{ - bp->tx_desc_ring = bnx2_bss.tx_desc_ring; - bp->tx_desc_mapping = virt_to_bus(bp->tx_desc_ring); - - bp->rx_desc_ring = bnx2_bss.rx_desc_ring; - memset(bp->rx_desc_ring, 0, sizeof(struct rx_bd) * RX_DESC_CNT); - bp->rx_desc_mapping = virt_to_bus(bp->rx_desc_ring); - - memset(&bnx2_bss.status_blk, 0, sizeof(struct status_block)); - bp->status_blk = &bnx2_bss.status_blk; - bp->status_blk_mapping = virt_to_bus(&bnx2_bss.status_blk); - - bp->stats_blk = &bnx2_bss.stats_blk; - memset(&bnx2_bss.stats_blk, 0, sizeof(struct statistics_block)); - bp->stats_blk_mapping = virt_to_bus(&bnx2_bss.stats_blk); - - return 0; -} - -static void -bnx2_report_fw_link(struct bnx2 *bp) -{ - u32 fw_link_status = 0; - - if (bp->link_up) { - u32 bmsr; - - switch (bp->line_speed) { - case SPEED_10: - if (bp->duplex == DUPLEX_HALF) - fw_link_status = BNX2_LINK_STATUS_10HALF; - else - fw_link_status = BNX2_LINK_STATUS_10FULL; - break; - case SPEED_100: - if (bp->duplex == DUPLEX_HALF) - fw_link_status = BNX2_LINK_STATUS_100HALF; - else - fw_link_status = BNX2_LINK_STATUS_100FULL; - break; - case SPEED_1000: - if (bp->duplex == DUPLEX_HALF) - fw_link_status = BNX2_LINK_STATUS_1000HALF; - else - fw_link_status = BNX2_LINK_STATUS_1000FULL; - break; - case SPEED_2500: - if (bp->duplex == DUPLEX_HALF) - fw_link_status = BNX2_LINK_STATUS_2500HALF; - else - fw_link_status = BNX2_LINK_STATUS_2500FULL; - break; - } - - fw_link_status |= BNX2_LINK_STATUS_LINK_UP; - - if (bp->autoneg) { - fw_link_status |= BNX2_LINK_STATUS_AN_ENABLED; - - bnx2_read_phy(bp, MII_BMSR, &bmsr); - bnx2_read_phy(bp, MII_BMSR, &bmsr); - - if (!(bmsr & BMSR_ANEGCOMPLETE) || - bp->phy_flags & PHY_PARALLEL_DETECT_FLAG) - fw_link_status |= BNX2_LINK_STATUS_PARALLEL_DET; - else - fw_link_status |= BNX2_LINK_STATUS_AN_COMPLETE; - } - } - else - fw_link_status = BNX2_LINK_STATUS_LINK_DOWN; - - REG_WR_IND(bp, bp->shmem_base + BNX2_LINK_STATUS, fw_link_status); -} - -static void -bnx2_report_link(struct bnx2 *bp) -{ - if (bp->link_up) { - printf("NIC Link is Up, "); - - printf("%d Mbps ", bp->line_speed); - - if (bp->duplex == DUPLEX_FULL) - printf("full duplex"); - else - printf("half duplex"); - - if (bp->flow_ctrl) { - if (bp->flow_ctrl & FLOW_CTRL_RX) { - printf(", receive "); - if (bp->flow_ctrl & FLOW_CTRL_TX) - printf("& transmit "); - } - else { - printf(", transmit "); - } - printf("flow control ON"); - } - printf("\n"); - } - else { - printf("NIC Link is Down\n"); - } - - bnx2_report_fw_link(bp); -} - -static void -bnx2_resolve_flow_ctrl(struct bnx2 *bp) -{ - u32 local_adv, remote_adv; - - bp->flow_ctrl = 0; - if ((bp->autoneg & (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) != - (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) { - - if (bp->duplex == DUPLEX_FULL) { - bp->flow_ctrl = bp->req_flow_ctrl; - } - return; - } - - if (bp->duplex != DUPLEX_FULL) { - return; - } - - if ((bp->phy_flags & PHY_SERDES_FLAG) && - (CHIP_NUM(bp) == CHIP_NUM_5708)) { - u32 val; - - bnx2_read_phy(bp, BCM5708S_1000X_STAT1, &val); - if (val & BCM5708S_1000X_STAT1_TX_PAUSE) - bp->flow_ctrl |= FLOW_CTRL_TX; - if (val & BCM5708S_1000X_STAT1_RX_PAUSE) - bp->flow_ctrl |= FLOW_CTRL_RX; - return; - } - - bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); - bnx2_read_phy(bp, MII_LPA, &remote_adv); - - if (bp->phy_flags & PHY_SERDES_FLAG) { - u32 new_local_adv = 0; - u32 new_remote_adv = 0; - - if (local_adv & ADVERTISE_1000XPAUSE) - new_local_adv |= ADVERTISE_PAUSE_CAP; - if (local_adv & ADVERTISE_1000XPSE_ASYM) - new_local_adv |= ADVERTISE_PAUSE_ASYM; - if (remote_adv & ADVERTISE_1000XPAUSE) - new_remote_adv |= ADVERTISE_PAUSE_CAP; - if (remote_adv & ADVERTISE_1000XPSE_ASYM) - new_remote_adv |= ADVERTISE_PAUSE_ASYM; - - local_adv = new_local_adv; - remote_adv = new_remote_adv; - } - - /* See Table 28B-3 of 802.3ab-1999 spec. */ - if (local_adv & ADVERTISE_PAUSE_CAP) { - if(local_adv & ADVERTISE_PAUSE_ASYM) { - if (remote_adv & ADVERTISE_PAUSE_CAP) { - bp->flow_ctrl = FLOW_CTRL_TX | FLOW_CTRL_RX; - } - else if (remote_adv & ADVERTISE_PAUSE_ASYM) { - bp->flow_ctrl = FLOW_CTRL_RX; - } - } - else { - if (remote_adv & ADVERTISE_PAUSE_CAP) { - bp->flow_ctrl = FLOW_CTRL_TX | FLOW_CTRL_RX; - } - } - } - else if (local_adv & ADVERTISE_PAUSE_ASYM) { - if ((remote_adv & ADVERTISE_PAUSE_CAP) && - (remote_adv & ADVERTISE_PAUSE_ASYM)) { - - bp->flow_ctrl = FLOW_CTRL_TX; - } - } -} - -static int -bnx2_5708s_linkup(struct bnx2 *bp) -{ - u32 val; - - bp->link_up = 1; - bnx2_read_phy(bp, BCM5708S_1000X_STAT1, &val); - switch (val & BCM5708S_1000X_STAT1_SPEED_MASK) { - case BCM5708S_1000X_STAT1_SPEED_10: - bp->line_speed = SPEED_10; - break; - case BCM5708S_1000X_STAT1_SPEED_100: - bp->line_speed = SPEED_100; - break; - case BCM5708S_1000X_STAT1_SPEED_1G: - bp->line_speed = SPEED_1000; - break; - case BCM5708S_1000X_STAT1_SPEED_2G5: - bp->line_speed = SPEED_2500; - break; - } - if (val & BCM5708S_1000X_STAT1_FD) - bp->duplex = DUPLEX_FULL; - else - bp->duplex = DUPLEX_HALF; - - return 0; -} - -static int -bnx2_5706s_linkup(struct bnx2 *bp) -{ - u32 bmcr, local_adv, remote_adv, common; - - bp->link_up = 1; - bp->line_speed = SPEED_1000; - - bnx2_read_phy(bp, MII_BMCR, &bmcr); - if (bmcr & BMCR_FULLDPLX) { - bp->duplex = DUPLEX_FULL; - } - else { - bp->duplex = DUPLEX_HALF; - } - - if (!(bmcr & BMCR_ANENABLE)) { - return 0; - } - - bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); - bnx2_read_phy(bp, MII_LPA, &remote_adv); - - common = local_adv & remote_adv; - if (common & (ADVERTISE_1000XHALF | ADVERTISE_1000XFULL)) { - - if (common & ADVERTISE_1000XFULL) { - bp->duplex = DUPLEX_FULL; - } - else { - bp->duplex = DUPLEX_HALF; - } - } - - return 0; -} - -static int -bnx2_copper_linkup(struct bnx2 *bp) -{ - u32 bmcr; - - bnx2_read_phy(bp, MII_BMCR, &bmcr); - if (bmcr & BMCR_ANENABLE) { - u32 local_adv, remote_adv, common; - - bnx2_read_phy(bp, MII_CTRL1000, &local_adv); - bnx2_read_phy(bp, MII_STAT1000, &remote_adv); - - common = local_adv & (remote_adv >> 2); - if (common & ADVERTISE_1000FULL) { - bp->line_speed = SPEED_1000; - bp->duplex = DUPLEX_FULL; - } - else if (common & ADVERTISE_1000HALF) { - bp->line_speed = SPEED_1000; - bp->duplex = DUPLEX_HALF; - } - else { - bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); - bnx2_read_phy(bp, MII_LPA, &remote_adv); - - common = local_adv & remote_adv; - if (common & ADVERTISE_100FULL) { - bp->line_speed = SPEED_100; - bp->duplex = DUPLEX_FULL; - } - else if (common & ADVERTISE_100HALF) { - bp->line_speed = SPEED_100; - bp->duplex = DUPLEX_HALF; - } - else if (common & ADVERTISE_10FULL) { - bp->line_speed = SPEED_10; - bp->duplex = DUPLEX_FULL; - } - else if (common & ADVERTISE_10HALF) { - bp->line_speed = SPEED_10; - bp->duplex = DUPLEX_HALF; - } - else { - bp->line_speed = 0; - bp->link_up = 0; - } - } - } - else { - if (bmcr & BMCR_SPEED100) { - bp->line_speed = SPEED_100; - } - else { - bp->line_speed = SPEED_10; - } - if (bmcr & BMCR_FULLDPLX) { - bp->duplex = DUPLEX_FULL; - } - else { - bp->duplex = DUPLEX_HALF; - } - } - - return 0; -} - -static int -bnx2_set_mac_link(struct bnx2 *bp) -{ - u32 val; - - REG_WR(bp, BNX2_EMAC_TX_LENGTHS, 0x2620); - if (bp->link_up && (bp->line_speed == SPEED_1000) && - (bp->duplex == DUPLEX_HALF)) { - REG_WR(bp, BNX2_EMAC_TX_LENGTHS, 0x26ff); - } - - /* Configure the EMAC mode register. */ - val = REG_RD(bp, BNX2_EMAC_MODE); - - val &= ~(BNX2_EMAC_MODE_PORT | BNX2_EMAC_MODE_HALF_DUPLEX | - BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK | - BNX2_EMAC_MODE_25G); - - if (bp->link_up) { - switch (bp->line_speed) { - case SPEED_10: - if (CHIP_NUM(bp) == CHIP_NUM_5708) { - val |= BNX2_EMAC_MODE_PORT_MII_10; - break; - } - /* fall through */ - case SPEED_100: - val |= BNX2_EMAC_MODE_PORT_MII; - break; - case SPEED_2500: - val |= BNX2_EMAC_MODE_25G; - /* fall through */ - case SPEED_1000: - val |= BNX2_EMAC_MODE_PORT_GMII; - break; - } - } - else { - val |= BNX2_EMAC_MODE_PORT_GMII; - } - - /* Set the MAC to operate in the appropriate duplex mode. */ - if (bp->duplex == DUPLEX_HALF) - val |= BNX2_EMAC_MODE_HALF_DUPLEX; - REG_WR(bp, BNX2_EMAC_MODE, val); - - /* Enable/disable rx PAUSE. */ - bp->rx_mode &= ~BNX2_EMAC_RX_MODE_FLOW_EN; - - if (bp->flow_ctrl & FLOW_CTRL_RX) - bp->rx_mode |= BNX2_EMAC_RX_MODE_FLOW_EN; - REG_WR(bp, BNX2_EMAC_RX_MODE, bp->rx_mode); - - /* Enable/disable tx PAUSE. */ - val = REG_RD(bp, BNX2_EMAC_TX_MODE); - val &= ~BNX2_EMAC_TX_MODE_FLOW_EN; - - if (bp->flow_ctrl & FLOW_CTRL_TX) - val |= BNX2_EMAC_TX_MODE_FLOW_EN; - REG_WR(bp, BNX2_EMAC_TX_MODE, val); - - /* Acknowledge the interrupt. */ - REG_WR(bp, BNX2_EMAC_STATUS, BNX2_EMAC_STATUS_LINK_CHANGE); - - return 0; -} - -static int -bnx2_set_link(struct bnx2 *bp) -{ - u32 bmsr; - u8 link_up; - - if (bp->loopback == MAC_LOOPBACK) { - bp->link_up = 1; - return 0; - } - - link_up = bp->link_up; - - bnx2_read_phy(bp, MII_BMSR, &bmsr); - bnx2_read_phy(bp, MII_BMSR, &bmsr); - - if ((bp->phy_flags & PHY_SERDES_FLAG) && - (CHIP_NUM(bp) == CHIP_NUM_5706)) { - u32 val; - - val = REG_RD(bp, BNX2_EMAC_STATUS); - if (val & BNX2_EMAC_STATUS_LINK) - bmsr |= BMSR_LSTATUS; - else - bmsr &= ~BMSR_LSTATUS; - } - - if (bmsr & BMSR_LSTATUS) { - bp->link_up = 1; - - if (bp->phy_flags & PHY_SERDES_FLAG) { - if (CHIP_NUM(bp) == CHIP_NUM_5706) - bnx2_5706s_linkup(bp); - else if (CHIP_NUM(bp) == CHIP_NUM_5708) - bnx2_5708s_linkup(bp); - } - else { - bnx2_copper_linkup(bp); - } - bnx2_resolve_flow_ctrl(bp); - } - else { - if ((bp->phy_flags & PHY_SERDES_FLAG) && - (bp->autoneg & AUTONEG_SPEED)) { - - u32 bmcr; - - bnx2_read_phy(bp, MII_BMCR, &bmcr); - if (!(bmcr & BMCR_ANENABLE)) { - bnx2_write_phy(bp, MII_BMCR, bmcr | - BMCR_ANENABLE); - } - } - bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; - bp->link_up = 0; - } - - if (bp->link_up != link_up) { - bnx2_report_link(bp); - } - - bnx2_set_mac_link(bp); - - return 0; -} - -static int -bnx2_reset_phy(struct bnx2 *bp) -{ - int i; - u32 reg; - - bnx2_write_phy(bp, MII_BMCR, BMCR_RESET); - -#define PHY_RESET_MAX_WAIT 100 - for (i = 0; i < PHY_RESET_MAX_WAIT; i++) { - udelay(10); - - bnx2_read_phy(bp, MII_BMCR, ®); - if (!(reg & BMCR_RESET)) { - udelay(20); - break; - } - } - if (i == PHY_RESET_MAX_WAIT) { - return -EBUSY; - } - return 0; -} - -static u32 -bnx2_phy_get_pause_adv(struct bnx2 *bp) -{ - u32 adv = 0; - - if ((bp->req_flow_ctrl & (FLOW_CTRL_RX | FLOW_CTRL_TX)) == - (FLOW_CTRL_RX | FLOW_CTRL_TX)) { - - if (bp->phy_flags & PHY_SERDES_FLAG) { - adv = ADVERTISE_1000XPAUSE; - } - else { - adv = ADVERTISE_PAUSE_CAP; - } - } - else if (bp->req_flow_ctrl & FLOW_CTRL_TX) { - if (bp->phy_flags & PHY_SERDES_FLAG) { - adv = ADVERTISE_1000XPSE_ASYM; - } - else { - adv = ADVERTISE_PAUSE_ASYM; - } - } - else if (bp->req_flow_ctrl & FLOW_CTRL_RX) { - if (bp->phy_flags & PHY_SERDES_FLAG) { - adv = ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM; - } - else { - adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; - } - } - return adv; -} - -static int -bnx2_setup_serdes_phy(struct bnx2 *bp) -{ - u32 adv, bmcr, up1; - u32 new_adv = 0; - - if (!(bp->autoneg & AUTONEG_SPEED)) { - u32 new_bmcr; - int force_link_down = 0; - - if (CHIP_NUM(bp) == CHIP_NUM_5708) { - bnx2_read_phy(bp, BCM5708S_UP1, &up1); - if (up1 & BCM5708S_UP1_2G5) { - up1 &= ~BCM5708S_UP1_2G5; - bnx2_write_phy(bp, BCM5708S_UP1, up1); - force_link_down = 1; - } - } - - bnx2_read_phy(bp, MII_ADVERTISE, &adv); - adv &= ~(ADVERTISE_1000XFULL | ADVERTISE_1000XHALF); - - bnx2_read_phy(bp, MII_BMCR, &bmcr); - new_bmcr = bmcr & ~BMCR_ANENABLE; - new_bmcr |= BMCR_SPEED1000; - if (bp->req_duplex == DUPLEX_FULL) { - adv |= ADVERTISE_1000XFULL; - new_bmcr |= BMCR_FULLDPLX; - } - else { - adv |= ADVERTISE_1000XHALF; - new_bmcr &= ~BMCR_FULLDPLX; - } - if ((new_bmcr != bmcr) || (force_link_down)) { - /* Force a link down visible on the other side */ - if (bp->link_up) { - bnx2_write_phy(bp, MII_ADVERTISE, adv & - ~(ADVERTISE_1000XFULL | - ADVERTISE_1000XHALF)); - bnx2_write_phy(bp, MII_BMCR, bmcr | - BMCR_ANRESTART | BMCR_ANENABLE); - - bp->link_up = 0; - bnx2_write_phy(bp, MII_BMCR, new_bmcr); - } - bnx2_write_phy(bp, MII_ADVERTISE, adv); - bnx2_write_phy(bp, MII_BMCR, new_bmcr); - } - return 0; - } - - if (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) { - bnx2_read_phy(bp, BCM5708S_UP1, &up1); - up1 |= BCM5708S_UP1_2G5; - bnx2_write_phy(bp, BCM5708S_UP1, up1); - } - - if (bp->advertising & ADVERTISED_1000baseT_Full) - new_adv |= ADVERTISE_1000XFULL; - - new_adv |= bnx2_phy_get_pause_adv(bp); - - bnx2_read_phy(bp, MII_ADVERTISE, &adv); - bnx2_read_phy(bp, MII_BMCR, &bmcr); - - bp->serdes_an_pending = 0; - if ((adv != new_adv) || ((bmcr & BMCR_ANENABLE) == 0)) { - /* Force a link down visible on the other side */ - if (bp->link_up) { - int i; - - bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); - for (i = 0; i < 110; i++) { - udelay(100); - } - } - - bnx2_write_phy(bp, MII_ADVERTISE, new_adv); - bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | - BMCR_ANENABLE); -#if 0 - if (CHIP_NUM(bp) == CHIP_NUM_5706) { - /* Speed up link-up time when the link partner - * does not autonegotiate which is very common - * in blade servers. Some blade servers use - * IPMI for kerboard input and it's important - * to minimize link disruptions. Autoneg. involves - * exchanging base pages plus 3 next pages and - * normally completes in about 120 msec. - */ - bp->current_interval = SERDES_AN_TIMEOUT; - bp->serdes_an_pending = 1; - mod_timer(&bp->timer, jiffies + bp->current_interval); - } -#endif - } - - return 0; -} - -#define ETHTOOL_ALL_FIBRE_SPEED \ - (ADVERTISED_1000baseT_Full) - -#define ETHTOOL_ALL_COPPER_SPEED \ - (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ - ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ - ADVERTISED_1000baseT_Full) - -#define PHY_ALL_10_100_SPEED (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL | ADVERTISE_CSMA) - -#define PHY_ALL_1000_SPEED (ADVERTISE_1000HALF | ADVERTISE_1000FULL) - -static int -bnx2_setup_copper_phy(struct bnx2 *bp) -{ - u32 bmcr; - u32 new_bmcr; - - bnx2_read_phy(bp, MII_BMCR, &bmcr); - - if (bp->autoneg & AUTONEG_SPEED) { - u32 adv_reg, adv1000_reg; - u32 new_adv_reg = 0; - u32 new_adv1000_reg = 0; - - bnx2_read_phy(bp, MII_ADVERTISE, &adv_reg); - adv_reg &= (PHY_ALL_10_100_SPEED | ADVERTISE_PAUSE_CAP | - ADVERTISE_PAUSE_ASYM); - - bnx2_read_phy(bp, MII_CTRL1000, &adv1000_reg); - adv1000_reg &= PHY_ALL_1000_SPEED; - - if (bp->advertising & ADVERTISED_10baseT_Half) - new_adv_reg |= ADVERTISE_10HALF; - if (bp->advertising & ADVERTISED_10baseT_Full) - new_adv_reg |= ADVERTISE_10FULL; - if (bp->advertising & ADVERTISED_100baseT_Half) - new_adv_reg |= ADVERTISE_100HALF; - if (bp->advertising & ADVERTISED_100baseT_Full) - new_adv_reg |= ADVERTISE_100FULL; - if (bp->advertising & ADVERTISED_1000baseT_Full) - new_adv1000_reg |= ADVERTISE_1000FULL; - - new_adv_reg |= ADVERTISE_CSMA; - - new_adv_reg |= bnx2_phy_get_pause_adv(bp); - - if ((adv1000_reg != new_adv1000_reg) || - (adv_reg != new_adv_reg) || - ((bmcr & BMCR_ANENABLE) == 0)) { - - bnx2_write_phy(bp, MII_ADVERTISE, new_adv_reg); - bnx2_write_phy(bp, MII_CTRL1000, new_adv1000_reg); - bnx2_write_phy(bp, MII_BMCR, BMCR_ANRESTART | - BMCR_ANENABLE); - } - else if (bp->link_up) { - /* Flow ctrl may have changed from auto to forced */ - /* or vice-versa. */ - - bnx2_resolve_flow_ctrl(bp); - bnx2_set_mac_link(bp); - } - return 0; - } - - new_bmcr = 0; - if (bp->req_line_speed == SPEED_100) { - new_bmcr |= BMCR_SPEED100; - } - if (bp->req_duplex == DUPLEX_FULL) { - new_bmcr |= BMCR_FULLDPLX; - } - if (new_bmcr != bmcr) { - u32 bmsr; - int i = 0; - - bnx2_read_phy(bp, MII_BMSR, &bmsr); - bnx2_read_phy(bp, MII_BMSR, &bmsr); - - if (bmsr & BMSR_LSTATUS) { - /* Force link down */ - bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); - do { - udelay(100); - bnx2_read_phy(bp, MII_BMSR, &bmsr); - bnx2_read_phy(bp, MII_BMSR, &bmsr); - i++; - } while ((bmsr & BMSR_LSTATUS) && (i < 620)); - } - - bnx2_write_phy(bp, MII_BMCR, new_bmcr); - - /* Normally, the new speed is setup after the link has - * gone down and up again. In some cases, link will not go - * down so we need to set up the new speed here. - */ - if (bmsr & BMSR_LSTATUS) { - bp->line_speed = bp->req_line_speed; - bp->duplex = bp->req_duplex; - bnx2_resolve_flow_ctrl(bp); - bnx2_set_mac_link(bp); - } - } - return 0; -} - -static int -bnx2_setup_phy(struct bnx2 *bp) -{ - if (bp->loopback == MAC_LOOPBACK) - return 0; - - if (bp->phy_flags & PHY_SERDES_FLAG) { - return (bnx2_setup_serdes_phy(bp)); - } - else { - return (bnx2_setup_copper_phy(bp)); - } -} - -static int -bnx2_init_5708s_phy(struct bnx2 *bp) -{ - u32 val; - - bnx2_write_phy(bp, BCM5708S_BLK_ADDR, BCM5708S_BLK_ADDR_DIG3); - bnx2_write_phy(bp, BCM5708S_DIG_3_0, BCM5708S_DIG_3_0_USE_IEEE); - bnx2_write_phy(bp, BCM5708S_BLK_ADDR, BCM5708S_BLK_ADDR_DIG); - - bnx2_read_phy(bp, BCM5708S_1000X_CTL1, &val); - val |= BCM5708S_1000X_CTL1_FIBER_MODE | BCM5708S_1000X_CTL1_AUTODET_EN; - bnx2_write_phy(bp, BCM5708S_1000X_CTL1, val); - - bnx2_read_phy(bp, BCM5708S_1000X_CTL2, &val); - val |= BCM5708S_1000X_CTL2_PLLEL_DET_EN; - bnx2_write_phy(bp, BCM5708S_1000X_CTL2, val); - - if (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) { - bnx2_read_phy(bp, BCM5708S_UP1, &val); - val |= BCM5708S_UP1_2G5; - bnx2_write_phy(bp, BCM5708S_UP1, val); - } - - if ((CHIP_ID(bp) == CHIP_ID_5708_A0) || - (CHIP_ID(bp) == CHIP_ID_5708_B0) || - (CHIP_ID(bp) == CHIP_ID_5708_B1)) { - /* increase tx signal amplitude */ - bnx2_write_phy(bp, BCM5708S_BLK_ADDR, - BCM5708S_BLK_ADDR_TX_MISC); - bnx2_read_phy(bp, BCM5708S_TX_ACTL1, &val); - val &= ~BCM5708S_TX_ACTL1_DRIVER_VCM; - bnx2_write_phy(bp, BCM5708S_TX_ACTL1, val); - bnx2_write_phy(bp, BCM5708S_BLK_ADDR, BCM5708S_BLK_ADDR_DIG); - } - - val = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG) & - BNX2_PORT_HW_CFG_CFG_TXCTL3_MASK; - - if (val) { - u32 is_backplane; - - is_backplane = REG_RD_IND(bp, bp->shmem_base + - BNX2_SHARED_HW_CFG_CONFIG); - if (is_backplane & BNX2_SHARED_HW_CFG_PHY_BACKPLANE) { - bnx2_write_phy(bp, BCM5708S_BLK_ADDR, - BCM5708S_BLK_ADDR_TX_MISC); - bnx2_write_phy(bp, BCM5708S_TX_ACTL3, val); - bnx2_write_phy(bp, BCM5708S_BLK_ADDR, - BCM5708S_BLK_ADDR_DIG); - } - } - return 0; -} - -static int -bnx2_init_5706s_phy(struct bnx2 *bp) -{ - u32 val; - - bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; - - if (CHIP_NUM(bp) == CHIP_NUM_5706) { - REG_WR(bp, BNX2_MISC_UNUSED0, 0x300); - } - - - bnx2_write_phy(bp, 0x18, 0x7); - bnx2_read_phy(bp, 0x18, &val); - bnx2_write_phy(bp, 0x18, val & ~0x4007); - - bnx2_write_phy(bp, 0x1c, 0x6c00); - bnx2_read_phy(bp, 0x1c, &val); - bnx2_write_phy(bp, 0x1c, (val & 0x3fd) | 0xec00); - - return 0; -} - -static int -bnx2_init_copper_phy(struct bnx2 *bp) -{ - u32 val; - - bp->phy_flags |= PHY_CRC_FIX_FLAG; - - if (bp->phy_flags & PHY_CRC_FIX_FLAG) { - bnx2_write_phy(bp, 0x18, 0x0c00); - bnx2_write_phy(bp, 0x17, 0x000a); - bnx2_write_phy(bp, 0x15, 0x310b); - bnx2_write_phy(bp, 0x17, 0x201f); - bnx2_write_phy(bp, 0x15, 0x9506); - bnx2_write_phy(bp, 0x17, 0x401f); - bnx2_write_phy(bp, 0x15, 0x14e2); - bnx2_write_phy(bp, 0x18, 0x0400); - } - - bnx2_write_phy(bp, 0x18, 0x7); - bnx2_read_phy(bp, 0x18, &val); - bnx2_write_phy(bp, 0x18, val & ~0x4007); - - bnx2_read_phy(bp, 0x10, &val); - bnx2_write_phy(bp, 0x10, val & ~0x1); - - /* ethernet@wirespeed */ - bnx2_write_phy(bp, 0x18, 0x7007); - bnx2_read_phy(bp, 0x18, &val); - bnx2_write_phy(bp, 0x18, val | (1 << 15) | (1 << 4)); - return 0; -} - -static int -bnx2_init_phy(struct bnx2 *bp) -{ - u32 val; - int rc = 0; - - bp->phy_flags &= ~PHY_INT_MODE_MASK_FLAG; - bp->phy_flags |= PHY_INT_MODE_LINK_READY_FLAG; - - REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK); - - bnx2_reset_phy(bp); - - bnx2_read_phy(bp, MII_PHYSID1, &val); - bp->phy_id = val << 16; - bnx2_read_phy(bp, MII_PHYSID2, &val); - bp->phy_id |= val & 0xffff; - - if (bp->phy_flags & PHY_SERDES_FLAG) { - if (CHIP_NUM(bp) == CHIP_NUM_5706) - rc = bnx2_init_5706s_phy(bp); - else if (CHIP_NUM(bp) == CHIP_NUM_5708) - rc = bnx2_init_5708s_phy(bp); - } - else { - rc = bnx2_init_copper_phy(bp); - } - - bnx2_setup_phy(bp); - - return rc; -} - -static int -bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int silent) -{ - int i; - u32 val; - - bp->fw_wr_seq++; - msg_data |= bp->fw_wr_seq; - - REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data); - - /* wait for an acknowledgement. */ - for (i = 0; i < (FW_ACK_TIME_OUT_MS / 50); i++) { - mdelay(50); - - val = REG_RD_IND(bp, bp->shmem_base + BNX2_FW_MB); - - if ((val & BNX2_FW_MSG_ACK) == (msg_data & BNX2_DRV_MSG_SEQ)) - break; - } - if ((msg_data & BNX2_DRV_MSG_DATA) == BNX2_DRV_MSG_DATA_WAIT0) - return 0; - - /* If we timed out, inform the firmware that this is the case. */ - if ((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) { - if (!silent) - printf("fw sync timeout, reset code = %x\n", (unsigned int) msg_data); - - msg_data &= ~BNX2_DRV_MSG_CODE; - msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT; - - REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data); - - return -EBUSY; - } - - if ((val & BNX2_FW_MSG_STATUS_MASK) != BNX2_FW_MSG_STATUS_OK) - return -EIO; - - return 0; -} - -static void -bnx2_init_context(struct bnx2 *bp) -{ - u32 vcid; - - vcid = 96; - while (vcid) { - u32 vcid_addr, pcid_addr, offset; - - vcid--; - - if (CHIP_ID(bp) == CHIP_ID_5706_A0) { - u32 new_vcid; - - vcid_addr = GET_PCID_ADDR(vcid); - if (vcid & 0x8) { - new_vcid = 0x60 + (vcid & 0xf0) + (vcid & 0x7); - } - else { - new_vcid = vcid; - } - pcid_addr = GET_PCID_ADDR(new_vcid); - } - else { - vcid_addr = GET_CID_ADDR(vcid); - pcid_addr = vcid_addr; - } - - REG_WR(bp, BNX2_CTX_VIRT_ADDR, 0x00); - REG_WR(bp, BNX2_CTX_PAGE_TBL, pcid_addr); - - /* Zero out the context. */ - for (offset = 0; offset < PHY_CTX_SIZE; offset += 4) { - CTX_WR(bp, 0x00, offset, 0); - } - - REG_WR(bp, BNX2_CTX_VIRT_ADDR, vcid_addr); - REG_WR(bp, BNX2_CTX_PAGE_TBL, pcid_addr); - } -} - -static int -bnx2_alloc_bad_rbuf(struct bnx2 *bp) -{ - u16 good_mbuf[512]; - u32 good_mbuf_cnt; - u32 val; - - REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, - BNX2_MISC_ENABLE_SET_BITS_RX_MBUF_ENABLE); - - good_mbuf_cnt = 0; - - /* Allocate a bunch of mbufs and save the good ones in an array. */ - val = REG_RD_IND(bp, BNX2_RBUF_STATUS1); - while (val & BNX2_RBUF_STATUS1_FREE_COUNT) { - REG_WR_IND(bp, BNX2_RBUF_COMMAND, BNX2_RBUF_COMMAND_ALLOC_REQ); - - val = REG_RD_IND(bp, BNX2_RBUF_FW_BUF_ALLOC); - - val &= BNX2_RBUF_FW_BUF_ALLOC_VALUE; - - /* The addresses with Bit 9 set are bad memory blocks. */ - if (!(val & (1 << 9))) { - good_mbuf[good_mbuf_cnt] = (u16) val; - good_mbuf_cnt++; - } - - val = REG_RD_IND(bp, BNX2_RBUF_STATUS1); - } - - /* Free the good ones back to the mbuf pool thus discarding - * all the bad ones. */ - while (good_mbuf_cnt) { - good_mbuf_cnt--; - - val = good_mbuf[good_mbuf_cnt]; - val = (val << 9) | val | 1; - - REG_WR_IND(bp, BNX2_RBUF_FW_BUF_FREE, val); - } - return 0; -} - -static void -bnx2_set_mac_addr(struct bnx2 *bp) -{ - u32 val; - u8 *mac_addr = bp->nic->node_addr; - - val = (mac_addr[0] << 8) | mac_addr[1]; - - REG_WR(bp, BNX2_EMAC_MAC_MATCH0, val); - - val = (mac_addr[2] << 24) | (mac_addr[3] << 16) | - (mac_addr[4] << 8) | mac_addr[5]; - - REG_WR(bp, BNX2_EMAC_MAC_MATCH1, val); -} - -static void -bnx2_set_rx_mode(struct nic *nic __unused) -{ - struct bnx2 *bp = &bnx2; - u32 rx_mode, sort_mode; - int i; - - rx_mode = bp->rx_mode & ~(BNX2_EMAC_RX_MODE_PROMISCUOUS | - BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG); - sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN; - - if (!(bp->flags & ASF_ENABLE_FLAG)) { - rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG; - } - - /* Accept all multicasts */ - for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { - REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), - 0xffffffff); - } - sort_mode |= BNX2_RPM_SORT_USER0_MC_EN; - - if (rx_mode != bp->rx_mode) { - bp->rx_mode = rx_mode; - REG_WR(bp, BNX2_EMAC_RX_MODE, rx_mode); - } - - REG_WR(bp, BNX2_RPM_SORT_USER0, 0x0); - REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode); - REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode | BNX2_RPM_SORT_USER0_ENA); -} - -static void -load_rv2p_fw(struct bnx2 *bp, u32 *rv2p_code, u32 rv2p_code_len, u32 rv2p_proc) -{ - unsigned int i; - u32 val; - - - for (i = 0; i < rv2p_code_len; i += 8) { - REG_WR(bp, BNX2_RV2P_INSTR_HIGH, *rv2p_code); - rv2p_code++; - REG_WR(bp, BNX2_RV2P_INSTR_LOW, *rv2p_code); - rv2p_code++; - - if (rv2p_proc == RV2P_PROC1) { - val = (i / 8) | BNX2_RV2P_PROC1_ADDR_CMD_RDWR; - REG_WR(bp, BNX2_RV2P_PROC1_ADDR_CMD, val); - } - else { - val = (i / 8) | BNX2_RV2P_PROC2_ADDR_CMD_RDWR; - REG_WR(bp, BNX2_RV2P_PROC2_ADDR_CMD, val); - } - } - - /* Reset the processor, un-stall is done later. */ - if (rv2p_proc == RV2P_PROC1) { - REG_WR(bp, BNX2_RV2P_COMMAND, BNX2_RV2P_COMMAND_PROC1_RESET); - } - else { - REG_WR(bp, BNX2_RV2P_COMMAND, BNX2_RV2P_COMMAND_PROC2_RESET); - } -} - -static void -load_cpu_fw(struct bnx2 *bp, struct cpu_reg *cpu_reg, struct fw_info *fw) -{ - u32 offset; - u32 val; - - /* Halt the CPU. */ - val = REG_RD_IND(bp, cpu_reg->mode); - val |= cpu_reg->mode_value_halt; - REG_WR_IND(bp, cpu_reg->mode, val); - REG_WR_IND(bp, cpu_reg->state, cpu_reg->state_value_clear); - - /* Load the Text area. */ - offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base); - if (fw->text) { - unsigned int j; - - for (j = 0; j < (fw->text_len / 4); j++, offset += 4) { - REG_WR_IND(bp, offset, fw->text[j]); - } - } - - /* Load the Data area. */ - offset = cpu_reg->spad_base + (fw->data_addr - cpu_reg->mips_view_base); - if (fw->data) { - unsigned int j; - - for (j = 0; j < (fw->data_len / 4); j++, offset += 4) { - REG_WR_IND(bp, offset, fw->data[j]); - } - } - - /* Load the SBSS area. */ - offset = cpu_reg->spad_base + (fw->sbss_addr - cpu_reg->mips_view_base); - if (fw->sbss) { - unsigned int j; - - for (j = 0; j < (fw->sbss_len / 4); j++, offset += 4) { - REG_WR_IND(bp, offset, fw->sbss[j]); - } - } - - /* Load the BSS area. */ - offset = cpu_reg->spad_base + (fw->bss_addr - cpu_reg->mips_view_base); - if (fw->bss) { - unsigned int j; - - for (j = 0; j < (fw->bss_len/4); j++, offset += 4) { - REG_WR_IND(bp, offset, fw->bss[j]); - } - } - - /* Load the Read-Only area. */ - offset = cpu_reg->spad_base + - (fw->rodata_addr - cpu_reg->mips_view_base); - if (fw->rodata) { - unsigned int j; - - for (j = 0; j < (fw->rodata_len / 4); j++, offset += 4) { - REG_WR_IND(bp, offset, fw->rodata[j]); - } - } - - /* Clear the pre-fetch instruction. */ - REG_WR_IND(bp, cpu_reg->inst, 0); - REG_WR_IND(bp, cpu_reg->pc, fw->start_addr); - - /* Start the CPU. */ - val = REG_RD_IND(bp, cpu_reg->mode); - val &= ~cpu_reg->mode_value_halt; - REG_WR_IND(bp, cpu_reg->state, cpu_reg->state_value_clear); - REG_WR_IND(bp, cpu_reg->mode, val); -} - -static void -bnx2_init_cpus(struct bnx2 *bp) -{ - struct cpu_reg cpu_reg; - struct fw_info fw; - - /* Unfortunately, it looks like we need to load the firmware - * before the card will work properly. That means this driver - * will be huge by Etherboot standards (approx. 50K compressed). - */ - - /* Initialize the RV2P processor. */ - load_rv2p_fw(bp, bnx2_rv2p_proc1, sizeof(bnx2_rv2p_proc1), RV2P_PROC1); - load_rv2p_fw(bp, bnx2_rv2p_proc2, sizeof(bnx2_rv2p_proc2), RV2P_PROC2); - - /* Initialize the RX Processor. */ - cpu_reg.mode = BNX2_RXP_CPU_MODE; - cpu_reg.mode_value_halt = BNX2_RXP_CPU_MODE_SOFT_HALT; - cpu_reg.mode_value_sstep = BNX2_RXP_CPU_MODE_STEP_ENA; - cpu_reg.state = BNX2_RXP_CPU_STATE; - cpu_reg.state_value_clear = 0xffffff; - cpu_reg.gpr0 = BNX2_RXP_CPU_REG_FILE; - cpu_reg.evmask = BNX2_RXP_CPU_EVENT_MASK; - cpu_reg.pc = BNX2_RXP_CPU_PROGRAM_COUNTER; - cpu_reg.inst = BNX2_RXP_CPU_INSTRUCTION; - cpu_reg.bp = BNX2_RXP_CPU_HW_BREAKPOINT; - cpu_reg.spad_base = BNX2_RXP_SCRATCH; - cpu_reg.mips_view_base = 0x8000000; - - fw.ver_major = bnx2_RXP_b06FwReleaseMajor; - fw.ver_minor = bnx2_RXP_b06FwReleaseMinor; - fw.ver_fix = bnx2_RXP_b06FwReleaseFix; - fw.start_addr = bnx2_RXP_b06FwStartAddr; - - fw.text_addr = bnx2_RXP_b06FwTextAddr; - fw.text_len = bnx2_RXP_b06FwTextLen; - fw.text_index = 0; - fw.text = bnx2_RXP_b06FwText; - - fw.data_addr = bnx2_RXP_b06FwDataAddr; - fw.data_len = bnx2_RXP_b06FwDataLen; - fw.data_index = 0; - fw.data = bnx2_RXP_b06FwData; - - fw.sbss_addr = bnx2_RXP_b06FwSbssAddr; - fw.sbss_len = bnx2_RXP_b06FwSbssLen; - fw.sbss_index = 0; - fw.sbss = bnx2_RXP_b06FwSbss; - - fw.bss_addr = bnx2_RXP_b06FwBssAddr; - fw.bss_len = bnx2_RXP_b06FwBssLen; - fw.bss_index = 0; - fw.bss = bnx2_RXP_b06FwBss; - - fw.rodata_addr = bnx2_RXP_b06FwRodataAddr; - fw.rodata_len = bnx2_RXP_b06FwRodataLen; - fw.rodata_index = 0; - fw.rodata = bnx2_RXP_b06FwRodata; - - load_cpu_fw(bp, &cpu_reg, &fw); - - /* Initialize the TX Processor. */ - cpu_reg.mode = BNX2_TXP_CPU_MODE; - cpu_reg.mode_value_halt = BNX2_TXP_CPU_MODE_SOFT_HALT; - cpu_reg.mode_value_sstep = BNX2_TXP_CPU_MODE_STEP_ENA; - cpu_reg.state = BNX2_TXP_CPU_STATE; - cpu_reg.state_value_clear = 0xffffff; - cpu_reg.gpr0 = BNX2_TXP_CPU_REG_FILE; - cpu_reg.evmask = BNX2_TXP_CPU_EVENT_MASK; - cpu_reg.pc = BNX2_TXP_CPU_PROGRAM_COUNTER; - cpu_reg.inst = BNX2_TXP_CPU_INSTRUCTION; - cpu_reg.bp = BNX2_TXP_CPU_HW_BREAKPOINT; - cpu_reg.spad_base = BNX2_TXP_SCRATCH; - cpu_reg.mips_view_base = 0x8000000; - - fw.ver_major = bnx2_TXP_b06FwReleaseMajor; - fw.ver_minor = bnx2_TXP_b06FwReleaseMinor; - fw.ver_fix = bnx2_TXP_b06FwReleaseFix; - fw.start_addr = bnx2_TXP_b06FwStartAddr; - - fw.text_addr = bnx2_TXP_b06FwTextAddr; - fw.text_len = bnx2_TXP_b06FwTextLen; - fw.text_index = 0; - fw.text = bnx2_TXP_b06FwText; - - fw.data_addr = bnx2_TXP_b06FwDataAddr; - fw.data_len = bnx2_TXP_b06FwDataLen; - fw.data_index = 0; - fw.data = bnx2_TXP_b06FwData; - - fw.sbss_addr = bnx2_TXP_b06FwSbssAddr; - fw.sbss_len = bnx2_TXP_b06FwSbssLen; - fw.sbss_index = 0; - fw.sbss = bnx2_TXP_b06FwSbss; - - fw.bss_addr = bnx2_TXP_b06FwBssAddr; - fw.bss_len = bnx2_TXP_b06FwBssLen; - fw.bss_index = 0; - fw.bss = bnx2_TXP_b06FwBss; - - fw.rodata_addr = bnx2_TXP_b06FwRodataAddr; - fw.rodata_len = bnx2_TXP_b06FwRodataLen; - fw.rodata_index = 0; - fw.rodata = bnx2_TXP_b06FwRodata; - - load_cpu_fw(bp, &cpu_reg, &fw); - - /* Initialize the TX Patch-up Processor. */ - cpu_reg.mode = BNX2_TPAT_CPU_MODE; - cpu_reg.mode_value_halt = BNX2_TPAT_CPU_MODE_SOFT_HALT; - cpu_reg.mode_value_sstep = BNX2_TPAT_CPU_MODE_STEP_ENA; - cpu_reg.state = BNX2_TPAT_CPU_STATE; - cpu_reg.state_value_clear = 0xffffff; - cpu_reg.gpr0 = BNX2_TPAT_CPU_REG_FILE; - cpu_reg.evmask = BNX2_TPAT_CPU_EVENT_MASK; - cpu_reg.pc = BNX2_TPAT_CPU_PROGRAM_COUNTER; - cpu_reg.inst = BNX2_TPAT_CPU_INSTRUCTION; - cpu_reg.bp = BNX2_TPAT_CPU_HW_BREAKPOINT; - cpu_reg.spad_base = BNX2_TPAT_SCRATCH; - cpu_reg.mips_view_base = 0x8000000; - - fw.ver_major = bnx2_TPAT_b06FwReleaseMajor; - fw.ver_minor = bnx2_TPAT_b06FwReleaseMinor; - fw.ver_fix = bnx2_TPAT_b06FwReleaseFix; - fw.start_addr = bnx2_TPAT_b06FwStartAddr; - - fw.text_addr = bnx2_TPAT_b06FwTextAddr; - fw.text_len = bnx2_TPAT_b06FwTextLen; - fw.text_index = 0; - fw.text = bnx2_TPAT_b06FwText; - - fw.data_addr = bnx2_TPAT_b06FwDataAddr; - fw.data_len = bnx2_TPAT_b06FwDataLen; - fw.data_index = 0; - fw.data = bnx2_TPAT_b06FwData; - - fw.sbss_addr = bnx2_TPAT_b06FwSbssAddr; - fw.sbss_len = bnx2_TPAT_b06FwSbssLen; - fw.sbss_index = 0; - fw.sbss = bnx2_TPAT_b06FwSbss; - - fw.bss_addr = bnx2_TPAT_b06FwBssAddr; - fw.bss_len = bnx2_TPAT_b06FwBssLen; - fw.bss_index = 0; - fw.bss = bnx2_TPAT_b06FwBss; - - fw.rodata_addr = bnx2_TPAT_b06FwRodataAddr; - fw.rodata_len = bnx2_TPAT_b06FwRodataLen; - fw.rodata_index = 0; - fw.rodata = bnx2_TPAT_b06FwRodata; - - load_cpu_fw(bp, &cpu_reg, &fw); - - /* Initialize the Completion Processor. */ - cpu_reg.mode = BNX2_COM_CPU_MODE; - cpu_reg.mode_value_halt = BNX2_COM_CPU_MODE_SOFT_HALT; - cpu_reg.mode_value_sstep = BNX2_COM_CPU_MODE_STEP_ENA; - cpu_reg.state = BNX2_COM_CPU_STATE; - cpu_reg.state_value_clear = 0xffffff; - cpu_reg.gpr0 = BNX2_COM_CPU_REG_FILE; - cpu_reg.evmask = BNX2_COM_CPU_EVENT_MASK; - cpu_reg.pc = BNX2_COM_CPU_PROGRAM_COUNTER; - cpu_reg.inst = BNX2_COM_CPU_INSTRUCTION; - cpu_reg.bp = BNX2_COM_CPU_HW_BREAKPOINT; - cpu_reg.spad_base = BNX2_COM_SCRATCH; - cpu_reg.mips_view_base = 0x8000000; - - fw.ver_major = bnx2_COM_b06FwReleaseMajor; - fw.ver_minor = bnx2_COM_b06FwReleaseMinor; - fw.ver_fix = bnx2_COM_b06FwReleaseFix; - fw.start_addr = bnx2_COM_b06FwStartAddr; - - fw.text_addr = bnx2_COM_b06FwTextAddr; - fw.text_len = bnx2_COM_b06FwTextLen; - fw.text_index = 0; - fw.text = bnx2_COM_b06FwText; - - fw.data_addr = bnx2_COM_b06FwDataAddr; - fw.data_len = bnx2_COM_b06FwDataLen; - fw.data_index = 0; - fw.data = bnx2_COM_b06FwData; - - fw.sbss_addr = bnx2_COM_b06FwSbssAddr; - fw.sbss_len = bnx2_COM_b06FwSbssLen; - fw.sbss_index = 0; - fw.sbss = bnx2_COM_b06FwSbss; - - fw.bss_addr = bnx2_COM_b06FwBssAddr; - fw.bss_len = bnx2_COM_b06FwBssLen; - fw.bss_index = 0; - fw.bss = bnx2_COM_b06FwBss; - - fw.rodata_addr = bnx2_COM_b06FwRodataAddr; - fw.rodata_len = bnx2_COM_b06FwRodataLen; - fw.rodata_index = 0; - fw.rodata = bnx2_COM_b06FwRodata; - - load_cpu_fw(bp, &cpu_reg, &fw); - -} - -static int -bnx2_set_power_state_0(struct bnx2 *bp) -{ - u16 pmcsr; - u32 val; - - pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr); - - pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, - (pmcsr & ~PCI_PM_CTRL_STATE_MASK) | - PCI_PM_CTRL_PME_STATUS); - - if (pmcsr & PCI_PM_CTRL_STATE_MASK) - /* delay required during transition out of D3hot */ - mdelay(20); - - val = REG_RD(bp, BNX2_EMAC_MODE); - val |= BNX2_EMAC_MODE_MPKT_RCVD | BNX2_EMAC_MODE_ACPI_RCVD; - val &= ~BNX2_EMAC_MODE_MPKT; - REG_WR(bp, BNX2_EMAC_MODE, val); - - val = REG_RD(bp, BNX2_RPM_CONFIG); - val &= ~BNX2_RPM_CONFIG_ACPI_ENA; - REG_WR(bp, BNX2_RPM_CONFIG, val); - - return 0; -} - -static void -bnx2_enable_nvram_access(struct bnx2 *bp) -{ - u32 val; - - val = REG_RD(bp, BNX2_NVM_ACCESS_ENABLE); - /* Enable both bits, even on read. */ - REG_WR(bp, BNX2_NVM_ACCESS_ENABLE, - val | BNX2_NVM_ACCESS_ENABLE_EN | BNX2_NVM_ACCESS_ENABLE_WR_EN); -} - -static void -bnx2_disable_nvram_access(struct bnx2 *bp) -{ - u32 val; - - val = REG_RD(bp, BNX2_NVM_ACCESS_ENABLE); - /* Disable both bits, even after read. */ - REG_WR(bp, BNX2_NVM_ACCESS_ENABLE, - val & ~(BNX2_NVM_ACCESS_ENABLE_EN | - BNX2_NVM_ACCESS_ENABLE_WR_EN)); -} - -static int -bnx2_init_nvram(struct bnx2 *bp) -{ - u32 val; - int j, entry_count, rc; - struct flash_spec *flash; - - /* Determine the selected interface. */ - val = REG_RD(bp, BNX2_NVM_CFG1); - - entry_count = sizeof(flash_table) / sizeof(struct flash_spec); - - rc = 0; - if (val & 0x40000000) { - /* Flash interface has been reconfigured */ - for (j = 0, flash = &flash_table[0]; j < entry_count; - j++, flash++) { - if ((val & FLASH_BACKUP_STRAP_MASK) == - (flash->config1 & FLASH_BACKUP_STRAP_MASK)) { - bp->flash_info = flash; - break; - } - } - } - else { - u32 mask; - /* Not yet been reconfigured */ - - if (val & (1 << 23)) - mask = FLASH_BACKUP_STRAP_MASK; - else - mask = FLASH_STRAP_MASK; - - for (j = 0, flash = &flash_table[0]; j < entry_count; - j++, flash++) { - - if ((val & mask) == (flash->strapping & mask)) { - bp->flash_info = flash; - - /* Enable access to flash interface */ - bnx2_enable_nvram_access(bp); - - /* Reconfigure the flash interface */ - REG_WR(bp, BNX2_NVM_CFG1, flash->config1); - REG_WR(bp, BNX2_NVM_CFG2, flash->config2); - REG_WR(bp, BNX2_NVM_CFG3, flash->config3); - REG_WR(bp, BNX2_NVM_WRITE1, flash->write1); - - /* Disable access to flash interface */ - bnx2_disable_nvram_access(bp); - - break; - } - } - } /* if (val & 0x40000000) */ - - if (j == entry_count) { - bp->flash_info = NULL; - printf("Unknown flash/EEPROM type.\n"); - return -ENODEV; - } - - val = REG_RD_IND(bp, bp->shmem_base + BNX2_SHARED_HW_CFG_CONFIG2); - val &= BNX2_SHARED_HW_CFG2_NVM_SIZE_MASK; - if (val) { - bp->flash_size = val; - } - else { - bp->flash_size = bp->flash_info->total_size; - } - - return rc; -} - -static int -bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) -{ - u32 val; - int i, rc = 0; - - /* Wait for the current PCI transaction to complete before - * issuing a reset. */ - REG_WR(bp, BNX2_MISC_ENABLE_CLR_BITS, - BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE | - BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE | - BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE | - BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE); - val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS); - udelay(5); - - - /* Wait for the firmware to tell us it is ok to issue a reset. */ - bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1); - - /* Deposit a driver reset signature so the firmware knows that - * this is a soft reset. */ - REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_RESET_SIGNATURE, - BNX2_DRV_RESET_SIGNATURE_MAGIC); - - /* Do a dummy read to force the chip to complete all current transaction - * before we issue a reset. */ - val = REG_RD(bp, BNX2_MISC_ID); - - val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | - BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | - BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP; - - /* Chip reset. */ - REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val); - - if ((CHIP_ID(bp) == CHIP_ID_5706_A0) || - (CHIP_ID(bp) == CHIP_ID_5706_A1)) - mdelay(15); - - /* Reset takes approximate 30 usec */ - for (i = 0; i < 10; i++) { - val = REG_RD(bp, BNX2_PCICFG_MISC_CONFIG); - if ((val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | - BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0) { - break; - } - udelay(10); - } - - if (val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | - BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) { - printf("Chip reset did not complete\n"); - return -EBUSY; - } - - /* Make sure byte swapping is properly configured. */ - val = REG_RD(bp, BNX2_PCI_SWAP_DIAG0); - if (val != 0x01020304) { - printf("Chip not in correct endian mode\n"); - return -ENODEV; - } - - /* Wait for the firmware to finish its initialization. */ - rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code, 0); - if (rc) { - return rc; - } - - if (CHIP_ID(bp) == CHIP_ID_5706_A0) { - /* Adjust the voltage regular to two steps lower. The default - * of this register is 0x0000000e. */ - REG_WR(bp, BNX2_MISC_VREG_CONTROL, 0x000000fa); - - /* Remove bad rbuf memory from the free pool. */ - rc = bnx2_alloc_bad_rbuf(bp); - } - - return rc; -} - -static void -bnx2_disable(struct nic *nic __unused) -{ - struct bnx2* bp = &bnx2; - - if (bp->regview) { - bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_UNLOAD); - iounmap(bp->regview); - } -} - -static int -bnx2_init_chip(struct bnx2 *bp) -{ - u32 val; - int rc; - - /* Make sure the interrupt is not active. */ - REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, BNX2_PCICFG_INT_ACK_CMD_MASK_INT); - - val = BNX2_DMA_CONFIG_DATA_BYTE_SWAP | - BNX2_DMA_CONFIG_DATA_WORD_SWAP | -#if __BYTE_ORDER == __BIG_ENDIAN - BNX2_DMA_CONFIG_CNTL_BYTE_SWAP | -#endif - BNX2_DMA_CONFIG_CNTL_WORD_SWAP | - DMA_READ_CHANS << 12 | - DMA_WRITE_CHANS << 16; - - val |= (0x2 << 20) | (1 << 11); - - if ((bp->flags & PCIX_FLAG) && (bp->bus_speed_mhz == 133)) - val |= (1 << 23); - - if ((CHIP_NUM(bp) == CHIP_NUM_5706) && - (CHIP_ID(bp) != CHIP_ID_5706_A0) && !(bp->flags & PCIX_FLAG)) - val |= BNX2_DMA_CONFIG_CNTL_PING_PONG_DMA; - - REG_WR(bp, BNX2_DMA_CONFIG, val); - - if (CHIP_ID(bp) == CHIP_ID_5706_A0) { - val = REG_RD(bp, BNX2_TDMA_CONFIG); - val |= BNX2_TDMA_CONFIG_ONE_DMA; - REG_WR(bp, BNX2_TDMA_CONFIG, val); - } - - if (bp->flags & PCIX_FLAG) { - u16 val16; - - pci_read_config_word(bp->pdev, bp->pcix_cap + PCI_X_CMD, - &val16); - pci_write_config_word(bp->pdev, bp->pcix_cap + PCI_X_CMD, - val16 & ~PCI_X_CMD_ERO); - } - - REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, - BNX2_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE | - BNX2_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE | - BNX2_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE); - - /* Initialize context mapping and zero out the quick contexts. The - * context block must have already been enabled. */ - bnx2_init_context(bp); - - bnx2_init_nvram(bp); - bnx2_init_cpus(bp); - - bnx2_set_mac_addr(bp); - - val = REG_RD(bp, BNX2_MQ_CONFIG); - val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE; - val |= BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256; - REG_WR(bp, BNX2_MQ_CONFIG, val); - - val = 0x10000 + (MAX_CID_CNT * MB_KERNEL_CTX_SIZE); - REG_WR(bp, BNX2_MQ_KNL_BYP_WIND_START, val); - REG_WR(bp, BNX2_MQ_KNL_WIND_END, val); - - val = (BCM_PAGE_BITS - 8) << 24; - REG_WR(bp, BNX2_RV2P_CONFIG, val); - - /* Configure page size. */ - val = REG_RD(bp, BNX2_TBDR_CONFIG); - val &= ~BNX2_TBDR_CONFIG_PAGE_SIZE; - val |= (BCM_PAGE_BITS - 8) << 24 | 0x40; - REG_WR(bp, BNX2_TBDR_CONFIG, val); - - val = bp->mac_addr[0] + - (bp->mac_addr[1] << 8) + - (bp->mac_addr[2] << 16) + - bp->mac_addr[3] + - (bp->mac_addr[4] << 8) + - (bp->mac_addr[5] << 16); - REG_WR(bp, BNX2_EMAC_BACKOFF_SEED, val); - - /* Program the MTU. Also include 4 bytes for CRC32. */ - val = ETH_MAX_MTU + ETH_HLEN + 4; - if (val > (MAX_ETHERNET_PACKET_SIZE + 4)) - val |= BNX2_EMAC_RX_MTU_SIZE_JUMBO_ENA; - REG_WR(bp, BNX2_EMAC_RX_MTU_SIZE, val); - - bp->last_status_idx = 0; - bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE; - - /* Set up how to generate a link change interrupt. */ - REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK); - - REG_WR(bp, BNX2_HC_STATUS_ADDR_L, - (u64) bp->status_blk_mapping & 0xffffffff); - REG_WR(bp, BNX2_HC_STATUS_ADDR_H, (u64) bp->status_blk_mapping >> 32); - - REG_WR(bp, BNX2_HC_STATISTICS_ADDR_L, - (u64) bp->stats_blk_mapping & 0xffffffff); - REG_WR(bp, BNX2_HC_STATISTICS_ADDR_H, - (u64) bp->stats_blk_mapping >> 32); - - REG_WR(bp, BNX2_HC_TX_QUICK_CONS_TRIP, - (bp->tx_quick_cons_trip_int << 16) | bp->tx_quick_cons_trip); - - REG_WR(bp, BNX2_HC_RX_QUICK_CONS_TRIP, - (bp->rx_quick_cons_trip_int << 16) | bp->rx_quick_cons_trip); - - REG_WR(bp, BNX2_HC_COMP_PROD_TRIP, - (bp->comp_prod_trip_int << 16) | bp->comp_prod_trip); - - REG_WR(bp, BNX2_HC_TX_TICKS, (bp->tx_ticks_int << 16) | bp->tx_ticks); - - REG_WR(bp, BNX2_HC_RX_TICKS, (bp->rx_ticks_int << 16) | bp->rx_ticks); - - REG_WR(bp, BNX2_HC_COM_TICKS, - (bp->com_ticks_int << 16) | bp->com_ticks); - - REG_WR(bp, BNX2_HC_CMD_TICKS, - (bp->cmd_ticks_int << 16) | bp->cmd_ticks); - - REG_WR(bp, BNX2_HC_STATS_TICKS, bp->stats_ticks & 0xffff00); - REG_WR(bp, BNX2_HC_STAT_COLLECT_TICKS, 0xbb8); /* 3ms */ - - if (CHIP_ID(bp) == CHIP_ID_5706_A1) - REG_WR(bp, BNX2_HC_CONFIG, BNX2_HC_CONFIG_COLLECT_STATS); - else { - REG_WR(bp, BNX2_HC_CONFIG, BNX2_HC_CONFIG_RX_TMR_MODE | - BNX2_HC_CONFIG_TX_TMR_MODE | - BNX2_HC_CONFIG_COLLECT_STATS); - } - - /* Clear internal stats counters. */ - REG_WR(bp, BNX2_HC_COMMAND, BNX2_HC_COMMAND_CLR_STAT_NOW); - - REG_WR(bp, BNX2_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE); - - if (REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_FEATURE) & - BNX2_PORT_FEATURE_ASF_ENABLED) - bp->flags |= ASF_ENABLE_FLAG; - - /* Initialize the receive filter. */ - bnx2_set_rx_mode(bp->nic); - - rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET, - 0); - - REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x5ffffff); - REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS); - - udelay(20); - - bp->hc_cmd = REG_RD(bp, BNX2_HC_COMMAND); - - return rc; -} - -static void -bnx2_init_tx_ring(struct bnx2 *bp) -{ - struct tx_bd *txbd; - u32 val; - - txbd = &bp->tx_desc_ring[MAX_TX_DESC_CNT]; - - /* Etherboot lives below 4GB, so hi is always 0 */ - txbd->tx_bd_haddr_hi = 0; - txbd->tx_bd_haddr_lo = bp->tx_desc_mapping; - - bp->tx_prod = 0; - bp->tx_cons = 0; - bp->hw_tx_cons = 0; - bp->tx_prod_bseq = 0; - - val = BNX2_L2CTX_TYPE_TYPE_L2; - val |= BNX2_L2CTX_TYPE_SIZE_L2; - CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TYPE, val); - - val = BNX2_L2CTX_CMD_TYPE_TYPE_L2; - val |= 8 << 16; - CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_CMD_TYPE, val); - - /* Etherboot lives below 4GB, so hi is always 0 */ - CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_HI, 0); - - val = (u64) bp->tx_desc_mapping & 0xffffffff; - CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_LO, val); -} - -static void -bnx2_init_rx_ring(struct bnx2 *bp) -{ - struct rx_bd *rxbd; - unsigned int i; - u16 prod, ring_prod; - u32 val; - - bp->rx_buf_use_size = RX_BUF_USE_SIZE; - bp->rx_buf_size = RX_BUF_SIZE; - - ring_prod = prod = bp->rx_prod = 0; - bp->rx_cons = 0; - bp->hw_rx_cons = 0; - bp->rx_prod_bseq = 0; - - memset(bnx2_bss.rx_buf, 0, sizeof(bnx2_bss.rx_buf)); - - rxbd = &bp->rx_desc_ring[0]; - for (i = 0; i < MAX_RX_DESC_CNT; i++, rxbd++) { - rxbd->rx_bd_len = bp->rx_buf_use_size; - rxbd->rx_bd_flags = RX_BD_FLAGS_START | RX_BD_FLAGS_END; - } - rxbd->rx_bd_haddr_hi = 0; - rxbd->rx_bd_haddr_lo = (u64) bp->rx_desc_mapping & 0xffffffff; - - val = BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE; - val |= BNX2_L2CTX_CTX_TYPE_SIZE_L2; - val |= 0x02 << 8; - CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_CTX_TYPE, val); - - /* Etherboot doesn't use memory above 4GB, so this is always 0 */ - CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_NX_BDHADDR_HI, 0); - - val = bp->rx_desc_mapping & 0xffffffff; - CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_NX_BDHADDR_LO, val); - - for (i = 0; (int) i < bp->rx_ring_size; i++) { - rxbd = &bp->rx_desc_ring[RX_RING_IDX(ring_prod)]; - rxbd->rx_bd_haddr_hi = 0; - rxbd->rx_bd_haddr_lo = virt_to_bus(&bnx2_bss.rx_buf[ring_prod][0]); - bp->rx_prod_bseq += bp->rx_buf_use_size; - prod = NEXT_RX_BD(prod); - ring_prod = RX_RING_IDX(prod); - } - bp->rx_prod = prod; - - REG_WR16(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BDIDX, bp->rx_prod); - - REG_WR(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BSEQ, bp->rx_prod_bseq); -} - -static int -bnx2_reset_nic(struct bnx2 *bp, u32 reset_code) -{ - int rc; - - rc = bnx2_reset_chip(bp, reset_code); - if (rc) { - return rc; - } - - bnx2_init_chip(bp); - bnx2_init_tx_ring(bp); - bnx2_init_rx_ring(bp); - return 0; -} - -static int -bnx2_init_nic(struct bnx2 *bp) -{ - int rc; - - if ((rc = bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET)) != 0) - return rc; - - bnx2_init_phy(bp); - bnx2_set_link(bp); - return 0; -} - -static int -bnx2_init_board(struct pci_device *pdev, struct nic *nic) -{ - unsigned long bnx2reg_base, bnx2reg_len; - struct bnx2 *bp = &bnx2; - int rc; - u32 reg; - - bp->flags = 0; - bp->phy_flags = 0; - - /* enable device (incl. PCI PM wakeup), and bus-mastering */ - adjust_pci_device(pdev); - - nic->ioaddr = pdev->ioaddr & ~3; - nic->irqno = 0; - - rc = 0; - bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); - if (bp->pm_cap == 0) { - printf("Cannot find power management capability, aborting.\n"); - rc = -EIO; - goto err_out_disable; - } - - bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); - if (bp->pcix_cap == 0) { - printf("Cannot find PCIX capability, aborting.\n"); - rc = -EIO; - goto err_out_disable; - } - - bp->pdev = pdev; - bp->nic = nic; - - bnx2reg_base = pci_bar_start(pdev, PCI_BASE_ADDRESS_0); - bnx2reg_len = MB_GET_CID_ADDR(17); - - bp->regview = ioremap(bnx2reg_base, bnx2reg_len); - - if (!bp->regview) { - printf("Cannot map register space, aborting.\n"); - rc = -EIO; - goto err_out_disable; - } - - /* Configure byte swap and enable write to the reg_window registers. - * Rely on CPU to do target byte swapping on big endian systems - * The chip's target access swapping will not swap all accesses - */ - pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG, - BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | - BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP); - - bnx2_set_power_state_0(bp); - - bp->chip_id = REG_RD(bp, BNX2_MISC_ID); - - /* Get bus information. */ - reg = REG_RD(bp, BNX2_PCICFG_MISC_STATUS); - if (reg & BNX2_PCICFG_MISC_STATUS_PCIX_DET) { - u32 clkreg; - - bp->flags |= PCIX_FLAG; - - clkreg = REG_RD(bp, BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS); - - clkreg &= BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET; - switch (clkreg) { - case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ: - bp->bus_speed_mhz = 133; - break; - - case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ: - bp->bus_speed_mhz = 100; - break; - - case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ: - case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ: - bp->bus_speed_mhz = 66; - break; - - case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ: - case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ: - bp->bus_speed_mhz = 50; - break; - - case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW: - case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ: - case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ: - bp->bus_speed_mhz = 33; - break; - } - } - else { - if (reg & BNX2_PCICFG_MISC_STATUS_M66EN) - bp->bus_speed_mhz = 66; - else - bp->bus_speed_mhz = 33; - } - - if (reg & BNX2_PCICFG_MISC_STATUS_32BIT_DET) - bp->flags |= PCI_32BIT_FLAG; - - /* 5706A0 may falsely detect SERR and PERR. */ - if (CHIP_ID(bp) == CHIP_ID_5706_A0) { - reg = REG_RD(bp, PCI_COMMAND); - reg &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY); - REG_WR(bp, PCI_COMMAND, reg); - } - else if ((CHIP_ID(bp) == CHIP_ID_5706_A1) && - !(bp->flags & PCIX_FLAG)) { - - printf("5706 A1 can only be used in a PCIX bus, aborting.\n"); - goto err_out_disable; - } - - bnx2_init_nvram(bp); - - reg = REG_RD_IND(bp, BNX2_SHM_HDR_SIGNATURE); - - if ((reg & BNX2_SHM_HDR_SIGNATURE_SIG_MASK) == - BNX2_SHM_HDR_SIGNATURE_SIG) - bp->shmem_base = REG_RD_IND(bp, BNX2_SHM_HDR_ADDR_0); - else - bp->shmem_base = HOST_VIEW_SHMEM_BASE; - - /* Get the permanent MAC address. First we need to make sure the - * firmware is actually running. - */ - reg = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_SIGNATURE); - - if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) != - BNX2_DEV_INFO_SIGNATURE_MAGIC) { - printf("Firmware not running, aborting.\n"); - rc = -ENODEV; - goto err_out_disable; - } - - bp->fw_ver = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_BC_REV); - - reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_MAC_UPPER); - bp->mac_addr[0] = (u8) (reg >> 8); - bp->mac_addr[1] = (u8) reg; - - reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_MAC_LOWER); - bp->mac_addr[2] = (u8) (reg >> 24); - bp->mac_addr[3] = (u8) (reg >> 16); - bp->mac_addr[4] = (u8) (reg >> 8); - bp->mac_addr[5] = (u8) reg; - - bp->tx_ring_size = MAX_TX_DESC_CNT; - bp->rx_ring_size = RX_BUF_CNT; - bp->rx_max_ring_idx = MAX_RX_DESC_CNT; - - bp->rx_offset = RX_OFFSET; - - bp->tx_quick_cons_trip_int = 20; - bp->tx_quick_cons_trip = 20; - bp->tx_ticks_int = 80; - bp->tx_ticks = 80; - - bp->rx_quick_cons_trip_int = 6; - bp->rx_quick_cons_trip = 6; - bp->rx_ticks_int = 18; - bp->rx_ticks = 18; - - bp->stats_ticks = 1000000 & 0xffff00; - - bp->phy_addr = 1; - - /* No need for WOL support in Etherboot */ - bp->flags |= NO_WOL_FLAG; - - /* Disable WOL support if we are running on a SERDES chip. */ - if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT) { - bp->phy_flags |= PHY_SERDES_FLAG; - if (CHIP_NUM(bp) == CHIP_NUM_5708) { - bp->phy_addr = 2; - reg = REG_RD_IND(bp, bp->shmem_base + - BNX2_SHARED_HW_CFG_CONFIG); - if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G) - bp->phy_flags |= PHY_2_5G_CAPABLE_FLAG; - } - } - - if (CHIP_ID(bp) == CHIP_ID_5706_A0) { - bp->tx_quick_cons_trip_int = - bp->tx_quick_cons_trip; - bp->tx_ticks_int = bp->tx_ticks; - bp->rx_quick_cons_trip_int = - bp->rx_quick_cons_trip; - bp->rx_ticks_int = bp->rx_ticks; - bp->comp_prod_trip_int = bp->comp_prod_trip; - bp->com_ticks_int = bp->com_ticks; - bp->cmd_ticks_int = bp->cmd_ticks; - } - - bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL; - bp->req_line_speed = 0; - if (bp->phy_flags & PHY_SERDES_FLAG) { - bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg; - - reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG); - reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK; - if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) { - bp->autoneg = 0; - bp->req_line_speed = bp->line_speed = SPEED_1000; - bp->req_duplex = DUPLEX_FULL; - } - } - else { - bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg; - } - - bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX; - - /* Disable driver heartbeat checking */ - REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_PULSE_MB, - BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE); - REG_RD_IND(bp, bp->shmem_base + BNX2_DRV_PULSE_MB); - - return 0; - -err_out_disable: - bnx2_disable(nic); - - return rc; -} - -static void -bnx2_transmit(struct nic *nic, const char *dst_addr, - unsigned int type, unsigned int size, const char *packet) -{ - /* Sometimes the nic will be behind by a frame. Using two transmit - * buffers prevents us from timing out in that case. - */ - static struct eth_frame { - uint8_t dst_addr[ETH_ALEN]; - uint8_t src_addr[ETH_ALEN]; - uint16_t type; - uint8_t data [ETH_FRAME_LEN - ETH_HLEN]; - } frame[2]; - static int frame_idx = 0; - - /* send the packet to destination */ - struct tx_bd *txbd; - struct bnx2 *bp = &bnx2; - u16 prod, ring_prod; - u16 hw_cons; - int i = 0; - - prod = bp->tx_prod; - ring_prod = TX_RING_IDX(prod); - hw_cons = bp->status_blk->status_tx_quick_consumer_index0; - if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) { - hw_cons++; - } - - while((hw_cons != prod) && (hw_cons != (PREV_TX_BD(prod)))) { - mdelay(10); /* give the nic a chance */ - //poll_interruptions(); - if (++i > 500) { /* timeout 5s for transmit */ - printf("transmit timed out\n"); - bnx2_disable(bp->nic); - bnx2_init_board(bp->pdev, bp->nic); - return; - } - } - if (i != 0) { - printf("#"); - } - - /* Copy the packet to the our local buffer */ - memcpy(&frame[frame_idx].dst_addr, dst_addr, ETH_ALEN); - memcpy(&frame[frame_idx].src_addr, nic->node_addr, ETH_ALEN); - frame[frame_idx].type = htons(type); - memset(&frame[frame_idx].data, 0, sizeof(frame[frame_idx].data)); - memcpy(&frame[frame_idx].data, packet, size); - - /* Setup the ring buffer entry to transmit */ - txbd = &bp->tx_desc_ring[ring_prod]; - txbd->tx_bd_haddr_hi = 0; /* Etherboot runs under 4GB */ - txbd->tx_bd_haddr_lo = virt_to_bus(&frame[frame_idx]); - txbd->tx_bd_mss_nbytes = (size + ETH_HLEN); - txbd->tx_bd_vlan_tag_flags = TX_BD_FLAGS_START | TX_BD_FLAGS_END; - - /* Advance to the next entry */ - prod = NEXT_TX_BD(prod); - frame_idx ^= 1; - - bp->tx_prod_bseq += (size + ETH_HLEN); - - REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, prod); - REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, bp->tx_prod_bseq); - - wmb(); - - bp->tx_prod = prod; -} - -static int -bnx2_poll_link(struct bnx2 *bp) -{ - u32 new_link_state, old_link_state, emac_status; - - new_link_state = bp->status_blk->status_attn_bits & - STATUS_ATTN_BITS_LINK_STATE; - - old_link_state = bp->status_blk->status_attn_bits_ack & - STATUS_ATTN_BITS_LINK_STATE; - - if (!new_link_state && !old_link_state) { - /* For some reason the card doesn't always update the link - * status bits properly. Kick the stupid thing and try again. - */ - u32 bmsr; - - bnx2_read_phy(bp, MII_BMSR, &bmsr); - bnx2_read_phy(bp, MII_BMSR, &bmsr); - - if ((bp->phy_flags & PHY_SERDES_FLAG) && - (CHIP_NUM(bp) == CHIP_NUM_5706)) { - REG_RD(bp, BNX2_EMAC_STATUS); - } - - new_link_state = bp->status_blk->status_attn_bits & - STATUS_ATTN_BITS_LINK_STATE; - - old_link_state = bp->status_blk->status_attn_bits_ack & - STATUS_ATTN_BITS_LINK_STATE; - - /* Okay, for some reason the above doesn't work with some - * switches (like HP ProCurve). If the above doesn't work, - * check the MAC directly to see if we have a link. Perhaps we - * should always check the MAC instead probing the MII. - */ - if (!new_link_state && !old_link_state) { - emac_status = REG_RD(bp, BNX2_EMAC_STATUS); - if (emac_status & BNX2_EMAC_STATUS_LINK_CHANGE) { - /* Acknowledge the link change */ - REG_WR(bp, BNX2_EMAC_STATUS, BNX2_EMAC_STATUS_LINK_CHANGE); - } else if (emac_status & BNX2_EMAC_STATUS_LINK) { - new_link_state = !old_link_state; - } - } - - } - - if (new_link_state != old_link_state) { - if (new_link_state) { - REG_WR(bp, BNX2_PCICFG_STATUS_BIT_SET_CMD, - STATUS_ATTN_BITS_LINK_STATE); - } - else { - REG_WR(bp, BNX2_PCICFG_STATUS_BIT_CLEAR_CMD, - STATUS_ATTN_BITS_LINK_STATE); - } - - bnx2_set_link(bp); - - /* This is needed to take care of transient status - * during link changes. - */ - - REG_WR(bp, BNX2_HC_COMMAND, - bp->hc_cmd | BNX2_HC_COMMAND_COAL_NOW_WO_INT); - REG_RD(bp, BNX2_HC_COMMAND); - - } - - return bp->link_up; -} - -static int -bnx2_poll(struct nic* nic, int retrieve) -{ - struct bnx2 *bp = &bnx2; - struct rx_bd *cons_bd, *prod_bd; - u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod; - struct l2_fhdr *rx_hdr; - int result = 0; - unsigned int len; - unsigned char *data; - u32 status; - -#if 0 - if ((bp->status_blk->status_idx == bp->last_status_idx) && - (REG_RD(bp, BNX2_PCICFG_MISC_STATUS) & - BNX2_PCICFG_MISC_STATUS_INTA_VALUE)) { - - bp->last_status_idx = bp->status_blk->status_idx; - REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, - BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | - BNX2_PCICFG_INT_ACK_CMD_MASK_INT | - bp->last_status_idx); - return 0; - } -#endif - - if ((bp->status_blk->status_rx_quick_consumer_index0 != bp->rx_cons) && !retrieve) - return 1; - - if (bp->status_blk->status_rx_quick_consumer_index0 != bp->rx_cons) { - - hw_cons = bp->hw_rx_cons = bp->status_blk->status_rx_quick_consumer_index0; - if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) { - hw_cons++; - } - sw_cons = bp->rx_cons; - sw_prod = bp->rx_prod; - - rmb(); - if (sw_cons != hw_cons) { - - sw_ring_cons = RX_RING_IDX(sw_cons); - sw_ring_prod = RX_RING_IDX(sw_prod); - - data = bus_to_virt(bp->rx_desc_ring[sw_ring_cons].rx_bd_haddr_lo); - - rx_hdr = (struct l2_fhdr *)data; - len = rx_hdr->l2_fhdr_pkt_len - 4; - if ((len > (ETH_MAX_MTU + ETH_HLEN)) || - ((status = rx_hdr->l2_fhdr_status) & - (L2_FHDR_ERRORS_BAD_CRC | - L2_FHDR_ERRORS_PHY_DECODE | - L2_FHDR_ERRORS_ALIGNMENT | - L2_FHDR_ERRORS_TOO_SHORT | - L2_FHDR_ERRORS_GIANT_FRAME))) { - result = 0; - } - else - { - nic->packetlen = len; - memcpy(nic->packet, data + bp->rx_offset, len); - result = 1; - } - - /* Reuse the buffer */ - bp->rx_prod_bseq += bp->rx_buf_use_size; - if (sw_cons != sw_prod) { - cons_bd = &bp->rx_desc_ring[sw_ring_cons]; - prod_bd = &bp->rx_desc_ring[sw_ring_prod]; - prod_bd->rx_bd_haddr_hi = 0; /* Etherboot runs under 4GB */ - prod_bd->rx_bd_haddr_lo = cons_bd->rx_bd_haddr_lo; - } - - sw_cons = NEXT_RX_BD(sw_cons); - sw_prod = NEXT_RX_BD(sw_prod); - - } - - bp->rx_cons = sw_cons; - bp->rx_prod = sw_prod; - - REG_WR16(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BDIDX, bp->rx_prod); - - REG_WR(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BSEQ, bp->rx_prod_bseq); - - wmb(); - - } - - bnx2_poll_link(bp); - -#if 0 - bp->last_status_idx = bp->status_blk->status_idx; - rmb(); - - REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, - BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | - BNX2_PCICFG_INT_ACK_CMD_MASK_INT | - bp->last_status_idx); - - REG_WR(bp, BNX2_HC_COMMAND, bp->hc_cmd | BNX2_HC_COMMAND_COAL_NOW_WO_INT); -#endif - - return result; -} - -static void -bnx2_irq(struct nic *nic __unused, irq_action_t action __unused) -{ - switch ( action ) { - case DISABLE: break; - case ENABLE: break; - case FORCE: break; - } -} - -static struct nic_operations bnx2_operations = { - .connect = dummy_connect, - .poll = bnx2_poll, - .transmit = bnx2_transmit, - .irq = bnx2_irq, -}; - -static int -bnx2_probe(struct nic *nic, struct pci_device *pdev) -{ - struct bnx2 *bp = &bnx2; - int i, rc; - - memset(bp, 0, sizeof(*bp)); - - rc = bnx2_init_board(pdev, nic); - if (rc < 0) { - return 0; - } - - /* - nic->disable = bnx2_disable; - nic->transmit = bnx2_transmit; - nic->poll = bnx2_poll; - nic->irq = bnx2_irq; - */ - - nic->nic_op = &bnx2_operations; - - memcpy(nic->node_addr, bp->mac_addr, ETH_ALEN); - printf("Ethernet addr: %s\n", eth_ntoa( nic->node_addr ) ); - printf("Broadcom NetXtreme II (%c%d) PCI%s %s %dMHz\n", - (int) ((CHIP_ID(bp) & 0xf000) >> 12) + 'A', - (int) ((CHIP_ID(bp) & 0x0ff0) >> 4), - ((bp->flags & PCIX_FLAG) ? "-X" : ""), - ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"), - bp->bus_speed_mhz); - - bnx2_set_power_state_0(bp); - bnx2_disable_int(bp); - - bnx2_alloc_mem(bp); - - rc = bnx2_init_nic(bp); - if (rc) { - return 0; - } - - bnx2_poll_link(bp); - for(i = 0; !bp->link_up && (i < VALID_LINK_TIMEOUT*100); i++) { - mdelay(1); - bnx2_poll_link(bp); - } -#if 1 - if (!bp->link_up){ - printf("Valid link not established\n"); - goto err_out_disable; - } -#endif - - return 1; - -err_out_disable: - bnx2_disable(nic); - return 0; -} - -static struct pci_device_id bnx2_nics[] = { - PCI_ROM(0x14e4, 0x164a, "bnx2-5706", "Broadcom NetXtreme II BCM5706", 0), - PCI_ROM(0x14e4, 0x164c, "bnx2-5708", "Broadcom NetXtreme II BCM5708", 0), - PCI_ROM(0x14e4, 0x16aa, "bnx2-5706S", "Broadcom NetXtreme II BCM5706S", 0), - PCI_ROM(0x14e4, 0x16ac, "bnx2-5708S", "Broadcom NetXtreme II BCM5708S", 0), -}; - -PCI_DRIVER ( bnx2_driver, bnx2_nics, PCI_NO_CLASS ); - -DRIVER ( "BNX2", nic_driver, pci_driver, bnx2_driver, bnx2_probe, bnx2_disable ); - -/* -static struct pci_driver bnx2_driver __pci_driver = { - .type = NIC_DRIVER, - .name = "BNX2", - .probe = bnx2_probe, - .ids = bnx2_nics, - .id_count = sizeof(bnx2_nics)/sizeof(bnx2_nics[0]), - .class = 0, -}; -*/ |