diff options
author | 2017-04-25 03:31:15 -0700 | |
---|---|---|
committer | 2017-05-22 06:48:08 +0000 | |
commit | bb756eebdac6fd24e8919e2c43f7d2c8c4091f59 (patch) | |
tree | ca11e03542edf2d8f631efeca5e1626d211107e3 /qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.c | |
parent | a14b48d18a9ed03ec191cf16b162206998a895ce (diff) |
Adding qemu as a submodule of KVMFORNFV
This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>
Diffstat (limited to 'qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.c')
-rw-r--r-- | qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.c | 1698 |
1 files changed, 0 insertions, 1698 deletions
diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.c deleted file mode 100644 index 92c4ffdf4..000000000 --- a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.c +++ /dev/null @@ -1,1698 +0,0 @@ -/* - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * Copyright (c) 2004-2005 Atheros Communications, Inc. - * Copyright (c) 2006 Devicescape Software, Inc. - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> - * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> - * - * Modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net> - * Original from Linux kernel 2.6.30. - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any - * redistribution must be conditioned upon including a substantially - * similar Disclaimer requirement for further binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY - * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, - * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER - * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - * THE POSSIBILITY OF SUCH DAMAGES. - * - */ - -FILE_LICENCE ( BSD3 ); - -#include <stdlib.h> -#include <ipxe/malloc.h> -#include <ipxe/timer.h> -#include <ipxe/netdevice.h> -#include <ipxe/pci.h> -#include <ipxe/pci_io.h> - -#include "base.h" -#include "reg.h" - -#define ATH5K_CALIB_INTERVAL 10 /* Calibrate PHY every 10 seconds */ -#define ATH5K_RETRIES 4 /* Number of times to retry packet sends */ -#define ATH5K_DESC_ALIGN 16 /* Alignment for TX/RX descriptors */ - -/******************\ -* Internal defines * -\******************/ - -/* Known PCI ids */ -static struct pci_device_id ath5k_nics[] = { - PCI_ROM(0x168c, 0x0207, "ath5210e", "Atheros 5210 early", AR5K_AR5210), - PCI_ROM(0x168c, 0x0007, "ath5210", "Atheros 5210", AR5K_AR5210), - PCI_ROM(0x168c, 0x0011, "ath5311", "Atheros 5311 (AHB)", AR5K_AR5211), - PCI_ROM(0x168c, 0x0012, "ath5211", "Atheros 5211", AR5K_AR5211), - PCI_ROM(0x168c, 0x0013, "ath5212", "Atheros 5212", AR5K_AR5212), - PCI_ROM(0xa727, 0x0013, "ath5212c","3com Ath 5212", AR5K_AR5212), - PCI_ROM(0x10b7, 0x0013, "rdag675", "3com 3CRDAG675", AR5K_AR5212), - PCI_ROM(0x168c, 0x1014, "ath5212m", "Ath 5212 miniPCI", AR5K_AR5212), - PCI_ROM(0x168c, 0x0014, "ath5212x14", "Atheros 5212 x14", AR5K_AR5212), - PCI_ROM(0x168c, 0x0015, "ath5212x15", "Atheros 5212 x15", AR5K_AR5212), - PCI_ROM(0x168c, 0x0016, "ath5212x16", "Atheros 5212 x16", AR5K_AR5212), - PCI_ROM(0x168c, 0x0017, "ath5212x17", "Atheros 5212 x17", AR5K_AR5212), - PCI_ROM(0x168c, 0x0018, "ath5212x18", "Atheros 5212 x18", AR5K_AR5212), - PCI_ROM(0x168c, 0x0019, "ath5212x19", "Atheros 5212 x19", AR5K_AR5212), - PCI_ROM(0x168c, 0x001a, "ath2413", "Atheros 2413 Griffin", AR5K_AR5212), - PCI_ROM(0x168c, 0x001b, "ath5413", "Atheros 5413 Eagle", AR5K_AR5212), - PCI_ROM(0x168c, 0x001c, "ath5212e", "Atheros 5212 PCI-E", AR5K_AR5212), - PCI_ROM(0x168c, 0x001d, "ath2417", "Atheros 2417 Nala", AR5K_AR5212), -}; - -/* Known SREVs */ -static const struct ath5k_srev_name srev_names[] = { - { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 }, - { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 }, - { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A }, - { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B }, - { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 }, - { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 }, - { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 }, - { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A }, - { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 }, - { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 }, - { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 }, - { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 }, - { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 }, - { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 }, - { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 }, - { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 }, - { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 }, - { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 }, - { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN }, - { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 }, - { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 }, - { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A }, - { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 }, - { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 }, - { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A }, - { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B }, - { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 }, - { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A }, - { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B }, - { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 }, - { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 }, - { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 }, - { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 }, - { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 }, - { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 }, - { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN }, -}; - -#define ATH5K_SPMBL_NO 1 -#define ATH5K_SPMBL_YES 2 -#define ATH5K_SPMBL_BOTH 3 - -static const struct { - u16 bitrate; - u8 short_pmbl; - u8 hw_code; -} ath5k_rates[] = { - { 10, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_1M }, - { 20, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_2M }, - { 55, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_5_5M }, - { 110, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_11M }, - { 60, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_6M }, - { 90, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_9M }, - { 120, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_12M }, - { 180, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_18M }, - { 240, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_24M }, - { 360, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_36M }, - { 480, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_48M }, - { 540, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_54M }, - { 20, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE }, - { 55, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE }, - { 110, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE }, - { 0, 0, 0 }, -}; - -#define ATH5K_NR_RATES 15 - -/* - * Prototypes - PCI stack related functions - */ -static int ath5k_probe(struct pci_device *pdev); -static void ath5k_remove(struct pci_device *pdev); - -struct pci_driver ath5k_pci_driver __pci_driver = { - .ids = ath5k_nics, - .id_count = sizeof(ath5k_nics) / sizeof(ath5k_nics[0]), - .probe = ath5k_probe, - .remove = ath5k_remove, -}; - - - -/* - * Prototypes - MAC 802.11 stack related functions - */ -static int ath5k_tx(struct net80211_device *dev, struct io_buffer *skb); -static int ath5k_reset(struct ath5k_softc *sc, struct net80211_channel *chan); -static int ath5k_reset_wake(struct ath5k_softc *sc); -static int ath5k_start(struct net80211_device *dev); -static void ath5k_stop(struct net80211_device *dev); -static int ath5k_config(struct net80211_device *dev, int changed); -static void ath5k_poll(struct net80211_device *dev); -static void ath5k_irq(struct net80211_device *dev, int enable); - -static struct net80211_device_operations ath5k_ops = { - .open = ath5k_start, - .close = ath5k_stop, - .transmit = ath5k_tx, - .poll = ath5k_poll, - .irq = ath5k_irq, - .config = ath5k_config, -}; - -/* - * Prototypes - Internal functions - */ -/* Attach detach */ -static int ath5k_attach(struct net80211_device *dev); -static void ath5k_detach(struct net80211_device *dev); -/* Channel/mode setup */ -static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, - struct net80211_channel *channels, - unsigned int mode, - unsigned int max); -static int ath5k_setup_bands(struct net80211_device *dev); -static int ath5k_chan_set(struct ath5k_softc *sc, - struct net80211_channel *chan); -static void ath5k_setcurmode(struct ath5k_softc *sc, - unsigned int mode); -static void ath5k_mode_setup(struct ath5k_softc *sc); - -/* Descriptor setup */ -static int ath5k_desc_alloc(struct ath5k_softc *sc); -static void ath5k_desc_free(struct ath5k_softc *sc); -/* Buffers setup */ -static int ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf); -static int ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf); - -static inline void ath5k_txbuf_free(struct ath5k_softc *sc, - struct ath5k_buf *bf) -{ - if (!bf->iob) - return; - - net80211_tx_complete(sc->dev, bf->iob, 0, ECANCELED); - bf->iob = NULL; -} - -static inline void ath5k_rxbuf_free(struct ath5k_softc *sc __unused, - struct ath5k_buf *bf) -{ - free_iob(bf->iob); - bf->iob = NULL; -} - -/* Queues setup */ -static int ath5k_txq_setup(struct ath5k_softc *sc, - int qtype, int subtype); -static void ath5k_txq_drainq(struct ath5k_softc *sc, - struct ath5k_txq *txq); -static void ath5k_txq_cleanup(struct ath5k_softc *sc); -static void ath5k_txq_release(struct ath5k_softc *sc); -/* Rx handling */ -static int ath5k_rx_start(struct ath5k_softc *sc); -static void ath5k_rx_stop(struct ath5k_softc *sc); -/* Tx handling */ -static void ath5k_tx_processq(struct ath5k_softc *sc, - struct ath5k_txq *txq); - -/* Interrupt handling */ -static int ath5k_init(struct ath5k_softc *sc); -static int ath5k_stop_hw(struct ath5k_softc *sc); - -static void ath5k_calibrate(struct ath5k_softc *sc); - -/* Filter */ -static void ath5k_configure_filter(struct ath5k_softc *sc); - -/********************\ -* PCI Initialization * -\********************/ - -#if DBGLVL_MAX -static const char * -ath5k_chip_name(enum ath5k_srev_type type, u16 val) -{ - const char *name = "xxxxx"; - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(srev_names); i++) { - if (srev_names[i].sr_type != type) - continue; - - if ((val & 0xf0) == srev_names[i].sr_val) - name = srev_names[i].sr_name; - - if ((val & 0xff) == srev_names[i].sr_val) { - name = srev_names[i].sr_name; - break; - } - } - - return name; -} -#endif - -static int ath5k_probe(struct pci_device *pdev) -{ - void *mem; - struct ath5k_softc *sc; - struct net80211_device *dev; - int ret; - u8 csz; - - adjust_pci_device(pdev); - - /* - * Cache line size is used to size and align various - * structures used to communicate with the hardware. - */ - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); - if (csz == 0) { - /* - * We must have this setup properly for rx buffer - * DMA to work so force a reasonable value here if it - * comes up zero. - */ - csz = 16; - pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); - } - /* - * The default setting of latency timer yields poor results, - * set it to the value used by other systems. It may be worth - * tweaking this setting more. - */ - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); - - /* - * Disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state. - */ - pci_write_config_byte(pdev, 0x41, 0); - - mem = ioremap(pdev->membase, 0x10000); - if (!mem) { - DBG("ath5k: cannot remap PCI memory region\n"); - ret = -EIO; - goto err; - } - - /* - * Allocate dev (net80211 main struct) - * and dev->priv (driver private data) - */ - dev = net80211_alloc(sizeof(*sc)); - if (!dev) { - DBG("ath5k: cannot allocate 802.11 device\n"); - ret = -ENOMEM; - goto err_map; - } - - /* Initialize driver private data */ - sc = dev->priv; - sc->dev = dev; - sc->pdev = pdev; - - sc->hwinfo = zalloc(sizeof(*sc->hwinfo)); - if (!sc->hwinfo) { - DBG("ath5k: cannot allocate 802.11 hardware info structure\n"); - ret = -ENOMEM; - goto err_free; - } - - sc->hwinfo->flags = NET80211_HW_RX_HAS_FCS; - sc->hwinfo->signal_type = NET80211_SIGNAL_DB; - sc->hwinfo->signal_max = 40; /* 35dB should give perfect 54Mbps */ - sc->hwinfo->channel_change_time = 5000; - - /* Avoid working with the device until setup is complete */ - sc->status |= ATH_STAT_INVALID; - - sc->iobase = mem; - sc->cachelsz = csz * 4; /* convert to bytes */ - - DBG("ath5k: register base at %p (%08lx)\n", sc->iobase, pdev->membase); - DBG("ath5k: cache line size %d\n", sc->cachelsz); - - /* Set private data */ - pci_set_drvdata(pdev, dev); - dev->netdev->dev = (struct device *)pdev; - - /* Initialize device */ - ret = ath5k_hw_attach(sc, pdev->id->driver_data, &sc->ah); - if (ret) - goto err_free_hwinfo; - - /* Finish private driver data initialization */ - ret = ath5k_attach(dev); - if (ret) - goto err_ah; - -#if DBGLVL_MAX - DBG("Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", - ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev), - sc->ah->ah_mac_srev, sc->ah->ah_phy_revision); - - if (!sc->ah->ah_single_chip) { - /* Single chip radio (!RF5111) */ - if (sc->ah->ah_radio_5ghz_revision && - !sc->ah->ah_radio_2ghz_revision) { - /* No 5GHz support -> report 2GHz radio */ - if (!(sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11A)) { - DBG("RF%s 2GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - /* No 2GHz support (5110 and some - * 5Ghz only cards) -> report 5Ghz radio */ - } else if (!(sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11B)) { - DBG("RF%s 5GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - /* Multiband radio */ - } else { - DBG("RF%s multiband radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - } - } - /* Multi chip radio (RF5111 - RF2111) -> - * report both 2GHz/5GHz radios */ - else if (sc->ah->ah_radio_5ghz_revision && - sc->ah->ah_radio_2ghz_revision) { - DBG("RF%s 5GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - DBG("RF%s 2GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_2ghz_revision), - sc->ah->ah_radio_2ghz_revision); - } - } -#endif - - /* Ready to go */ - sc->status &= ~ATH_STAT_INVALID; - - return 0; -err_ah: - ath5k_hw_detach(sc->ah); -err_free_hwinfo: - free(sc->hwinfo); -err_free: - net80211_free(dev); -err_map: - iounmap(mem); -err: - return ret; -} - -static void ath5k_remove(struct pci_device *pdev) -{ - struct net80211_device *dev = pci_get_drvdata(pdev); - struct ath5k_softc *sc = dev->priv; - - ath5k_detach(dev); - ath5k_hw_detach(sc->ah); - iounmap(sc->iobase); - free(sc->hwinfo); - net80211_free(dev); -} - - -/***********************\ -* Driver Initialization * -\***********************/ - -static int -ath5k_attach(struct net80211_device *dev) -{ - struct ath5k_softc *sc = dev->priv; - struct ath5k_hw *ah = sc->ah; - int ret; - - /* - * Collect the channel list. The 802.11 layer - * is resposible for filtering this list based - * on settings like the phy mode and regulatory - * domain restrictions. - */ - ret = ath5k_setup_bands(dev); - if (ret) { - DBG("ath5k: can't get channels\n"); - goto err; - } - - /* NB: setup here so ath5k_rate_update is happy */ - if (ah->ah_modes & AR5K_MODE_BIT_11A) - ath5k_setcurmode(sc, AR5K_MODE_11A); - else - ath5k_setcurmode(sc, AR5K_MODE_11B); - - /* - * Allocate tx+rx descriptors and populate the lists. - */ - ret = ath5k_desc_alloc(sc); - if (ret) { - DBG("ath5k: can't allocate descriptors\n"); - goto err; - } - - /* - * Allocate hardware transmit queues. Note that hw functions - * handle reseting these queues at the needed time. - */ - ret = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE); - if (ret) { - DBG("ath5k: can't setup xmit queue\n"); - goto err_desc; - } - - sc->last_calib_ticks = currticks(); - - ret = ath5k_eeprom_read_mac(ah, sc->hwinfo->hwaddr); - if (ret) { - DBG("ath5k: unable to read address from EEPROM: 0x%04x\n", - sc->pdev->device); - goto err_queues; - } - - memset(sc->bssidmask, 0xff, ETH_ALEN); - ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask); - - ret = net80211_register(sc->dev, &ath5k_ops, sc->hwinfo); - if (ret) { - DBG("ath5k: can't register ieee80211 hw\n"); - goto err_queues; - } - - return 0; -err_queues: - ath5k_txq_release(sc); -err_desc: - ath5k_desc_free(sc); -err: - return ret; -} - -static void -ath5k_detach(struct net80211_device *dev) -{ - struct ath5k_softc *sc = dev->priv; - - net80211_unregister(dev); - ath5k_desc_free(sc); - ath5k_txq_release(sc); -} - - - - -/********************\ -* Channel/mode setup * -\********************/ - -/* - * Convert IEEE channel number to MHz frequency. - */ -static inline short -ath5k_ieee2mhz(short chan) -{ - if (chan < 14) - return 2407 + 5 * chan; - if (chan == 14) - return 2484; - if (chan < 27) - return 2212 + 20 * chan; - return 5000 + 5 * chan; -} - -static unsigned int -ath5k_copy_channels(struct ath5k_hw *ah, - struct net80211_channel *channels, - unsigned int mode, unsigned int max) -{ - unsigned int i, count, size, chfreq, freq, ch; - - if (!(ah->ah_modes & (1 << mode))) - return 0; - - switch (mode) { - case AR5K_MODE_11A: - case AR5K_MODE_11A_TURBO: - /* 1..220, but 2GHz frequencies are filtered by check_channel */ - size = 220; - chfreq = CHANNEL_5GHZ; - break; - case AR5K_MODE_11B: - case AR5K_MODE_11G: - case AR5K_MODE_11G_TURBO: - size = 26; - chfreq = CHANNEL_2GHZ; - break; - default: - return 0; - } - - for (i = 0, count = 0; i < size && max > 0; i++) { - ch = i + 1 ; - freq = ath5k_ieee2mhz(ch); - - /* Check if channel is supported by the chipset */ - if (!ath5k_channel_ok(ah, freq, chfreq)) - continue; - - /* Write channel info and increment counter */ - channels[count].center_freq = freq; - channels[count].maxpower = 0; /* use regulatory */ - channels[count].band = (chfreq == CHANNEL_2GHZ) ? - NET80211_BAND_2GHZ : NET80211_BAND_5GHZ; - switch (mode) { - case AR5K_MODE_11A: - case AR5K_MODE_11G: - channels[count].hw_value = chfreq | CHANNEL_OFDM; - break; - case AR5K_MODE_11A_TURBO: - case AR5K_MODE_11G_TURBO: - channels[count].hw_value = chfreq | - CHANNEL_OFDM | CHANNEL_TURBO; - break; - case AR5K_MODE_11B: - channels[count].hw_value = CHANNEL_B; - } - - count++; - max--; - } - - return count; -} - -static int -ath5k_setup_bands(struct net80211_device *dev) -{ - struct ath5k_softc *sc = dev->priv; - struct ath5k_hw *ah = sc->ah; - int max_c, count_c = 0; - int i; - int band; - - max_c = sizeof(sc->hwinfo->channels) / sizeof(sc->hwinfo->channels[0]); - - /* 2GHz band */ - if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11G) { - /* G mode */ - band = NET80211_BAND_2GHZ; - sc->hwinfo->bands = NET80211_BAND_BIT_2GHZ; - sc->hwinfo->modes = (NET80211_MODE_G | NET80211_MODE_B); - - for (i = 0; i < 12; i++) - sc->hwinfo->rates[band][i] = ath5k_rates[i].bitrate; - sc->hwinfo->nr_rates[band] = 12; - - sc->hwinfo->nr_channels = - ath5k_copy_channels(ah, sc->hwinfo->channels, - AR5K_MODE_11G, max_c); - count_c = sc->hwinfo->nr_channels; - max_c -= count_c; - } else if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11B) { - /* B mode */ - band = NET80211_BAND_2GHZ; - sc->hwinfo->bands = NET80211_BAND_BIT_2GHZ; - sc->hwinfo->modes = NET80211_MODE_B; - - for (i = 0; i < 4; i++) - sc->hwinfo->rates[band][i] = ath5k_rates[i].bitrate; - sc->hwinfo->nr_rates[band] = 4; - - sc->hwinfo->nr_channels = - ath5k_copy_channels(ah, sc->hwinfo->channels, - AR5K_MODE_11B, max_c); - count_c = sc->hwinfo->nr_channels; - max_c -= count_c; - } - - /* 5GHz band, A mode */ - if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11A) { - band = NET80211_BAND_5GHZ; - sc->hwinfo->bands |= NET80211_BAND_BIT_5GHZ; - sc->hwinfo->modes |= NET80211_MODE_A; - - for (i = 0; i < 8; i++) - sc->hwinfo->rates[band][i] = ath5k_rates[i+4].bitrate; - sc->hwinfo->nr_rates[band] = 8; - - sc->hwinfo->nr_channels = - ath5k_copy_channels(ah, sc->hwinfo->channels, - AR5K_MODE_11B, max_c); - count_c = sc->hwinfo->nr_channels; - max_c -= count_c; - } - - return 0; -} - -/* - * Set/change channels. If the channel is really being changed, - * it's done by reseting the chip. To accomplish this we must - * first cleanup any pending DMA, then restart stuff after a la - * ath5k_init. - */ -static int -ath5k_chan_set(struct ath5k_softc *sc, struct net80211_channel *chan) -{ - if (chan->center_freq != sc->curchan->center_freq || - chan->hw_value != sc->curchan->hw_value) { - /* - * To switch channels clear any pending DMA operations; - * wait long enough for the RX fifo to drain, reset the - * hardware at the new frequency, and then re-enable - * the relevant bits of the h/w. - */ - DBG2("ath5k: resetting for channel change (%d -> %d MHz)\n", - sc->curchan->center_freq, chan->center_freq); - return ath5k_reset(sc, chan); - } - - return 0; -} - -static void -ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) -{ - sc->curmode = mode; - - if (mode == AR5K_MODE_11A) { - sc->curband = NET80211_BAND_5GHZ; - } else { - sc->curband = NET80211_BAND_2GHZ; - } -} - -static void -ath5k_mode_setup(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - u32 rfilt; - - /* configure rx filter */ - rfilt = sc->filter_flags; - ath5k_hw_set_rx_filter(ah, rfilt); - - if (ath5k_hw_hasbssidmask(ah)) - ath5k_hw_set_bssid_mask(ah, sc->bssidmask); - - /* configure operational mode */ - ath5k_hw_set_opmode(ah); - - ath5k_hw_set_mcast_filter(ah, 0, 0); -} - -static inline int -ath5k_hw_rix_to_bitrate(int hw_rix) -{ - int i; - - for (i = 0; i < ATH5K_NR_RATES; i++) { - if (ath5k_rates[i].hw_code == hw_rix) - return ath5k_rates[i].bitrate; - } - - DBG("ath5k: invalid rix %02x\n", hw_rix); - return 10; /* use lowest rate */ -} - -int ath5k_bitrate_to_hw_rix(int bitrate) -{ - int i; - - for (i = 0; i < ATH5K_NR_RATES; i++) { - if (ath5k_rates[i].bitrate == bitrate) - return ath5k_rates[i].hw_code; - } - - DBG("ath5k: invalid bitrate %d\n", bitrate); - return ATH5K_RATE_CODE_1M; /* use lowest rate */ -} - -/***************\ -* Buffers setup * -\***************/ - -static struct io_buffer * -ath5k_rx_iob_alloc(struct ath5k_softc *sc, u32 *iob_addr) -{ - struct io_buffer *iob; - unsigned int off; - - /* - * Allocate buffer with headroom_needed space for the - * fake physical layer header at the start. - */ - iob = alloc_iob(sc->rxbufsize + sc->cachelsz - 1); - - if (!iob) { - DBG("ath5k: can't alloc iobuf of size %d\n", - sc->rxbufsize + sc->cachelsz - 1); - return NULL; - } - - *iob_addr = virt_to_bus(iob->data); - - /* - * Cache-line-align. This is important (for the - * 5210 at least) as not doing so causes bogus data - * in rx'd frames. - */ - off = *iob_addr % sc->cachelsz; - if (off != 0) { - iob_reserve(iob, sc->cachelsz - off); - *iob_addr += sc->cachelsz - off; - } - - return iob; -} - -static int -ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) -{ - struct ath5k_hw *ah = sc->ah; - struct io_buffer *iob = bf->iob; - struct ath5k_desc *ds; - - if (!iob) { - iob = ath5k_rx_iob_alloc(sc, &bf->iobaddr); - if (!iob) - return -ENOMEM; - bf->iob = iob; - } - - /* - * Setup descriptors. For receive we always terminate - * the descriptor list with a self-linked entry so we'll - * not get overrun under high load (as can happen with a - * 5212 when ANI processing enables PHY error frames). - * - * To insure the last descriptor is self-linked we create - * each descriptor as self-linked and add it to the end. As - * each additional descriptor is added the previous self-linked - * entry is ``fixed'' naturally. This should be safe even - * if DMA is happening. When processing RX interrupts we - * never remove/process the last, self-linked, entry on the - * descriptor list. This insures the hardware always has - * someplace to write a new frame. - */ - ds = bf->desc; - ds->ds_link = bf->daddr; /* link to self */ - ds->ds_data = bf->iobaddr; - if (ah->ah_setup_rx_desc(ah, ds, - iob_tailroom(iob), /* buffer size */ - 0) != 0) { - DBG("ath5k: error setting up RX descriptor for %zd bytes\n", iob_tailroom(iob)); - return -EINVAL; - } - - if (sc->rxlink != NULL) - *sc->rxlink = bf->daddr; - sc->rxlink = &ds->ds_link; - return 0; -} - -static int -ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) -{ - struct ath5k_hw *ah = sc->ah; - struct ath5k_txq *txq = &sc->txq; - struct ath5k_desc *ds = bf->desc; - struct io_buffer *iob = bf->iob; - unsigned int pktlen, flags; - int ret; - u16 duration = 0; - u16 cts_rate = 0; - - flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK; - bf->iobaddr = virt_to_bus(iob->data); - pktlen = iob_len(iob); - - /* FIXME: If we are in g mode and rate is a CCK rate - * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta - * from tx power (value is in dB units already) */ - if (sc->dev->phy_flags & NET80211_PHY_USE_PROTECTION) { - struct net80211_device *dev = sc->dev; - - flags |= AR5K_TXDESC_CTSENA; - cts_rate = sc->hw_rtscts_rate; - duration = net80211_cts_duration(dev, pktlen); - } - ret = ah->ah_setup_tx_desc(ah, ds, pktlen, - IEEE80211_TYP_FRAME_HEADER_LEN, - AR5K_PKT_TYPE_NORMAL, sc->power_level * 2, - sc->hw_rate, ATH5K_RETRIES, - AR5K_TXKEYIX_INVALID, 0, flags, - cts_rate, duration); - if (ret) - return ret; - - ds->ds_link = 0; - ds->ds_data = bf->iobaddr; - - list_add_tail(&bf->list, &txq->q); - if (txq->link == NULL) /* is this first packet? */ - ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr); - else /* no, so only link it */ - *txq->link = bf->daddr; - - txq->link = &ds->ds_link; - ath5k_hw_start_tx_dma(ah, txq->qnum); - mb(); - - return 0; -} - -/*******************\ -* Descriptors setup * -\*******************/ - -static int -ath5k_desc_alloc(struct ath5k_softc *sc) -{ - struct ath5k_desc *ds; - struct ath5k_buf *bf; - u32 da; - unsigned int i; - int ret; - - /* allocate descriptors */ - sc->desc_len = sizeof(struct ath5k_desc) * (ATH_TXBUF + ATH_RXBUF + 1); - sc->desc = malloc_dma(sc->desc_len, ATH5K_DESC_ALIGN); - if (sc->desc == NULL) { - DBG("ath5k: can't allocate descriptors\n"); - ret = -ENOMEM; - goto err; - } - memset(sc->desc, 0, sc->desc_len); - sc->desc_daddr = virt_to_bus(sc->desc); - - ds = sc->desc; - da = sc->desc_daddr; - - bf = calloc(ATH_TXBUF + ATH_RXBUF + 1, sizeof(struct ath5k_buf)); - if (bf == NULL) { - DBG("ath5k: can't allocate buffer pointers\n"); - ret = -ENOMEM; - goto err_free; - } - sc->bufptr = bf; - - INIT_LIST_HEAD(&sc->rxbuf); - for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) { - bf->desc = ds; - bf->daddr = da; - list_add_tail(&bf->list, &sc->rxbuf); - } - - INIT_LIST_HEAD(&sc->txbuf); - sc->txbuf_len = ATH_TXBUF; - for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, da += sizeof(*ds)) { - bf->desc = ds; - bf->daddr = da; - list_add_tail(&bf->list, &sc->txbuf); - } - - return 0; - -err_free: - free_dma(sc->desc, sc->desc_len); -err: - sc->desc = NULL; - return ret; -} - -static void -ath5k_desc_free(struct ath5k_softc *sc) -{ - struct ath5k_buf *bf; - - list_for_each_entry(bf, &sc->txbuf, list) - ath5k_txbuf_free(sc, bf); - list_for_each_entry(bf, &sc->rxbuf, list) - ath5k_rxbuf_free(sc, bf); - - /* Free memory associated with all descriptors */ - free_dma(sc->desc, sc->desc_len); - - free(sc->bufptr); - sc->bufptr = NULL; -} - - - - - -/**************\ -* Queues setup * -\**************/ - -static int -ath5k_txq_setup(struct ath5k_softc *sc, int qtype, int subtype) -{ - struct ath5k_hw *ah = sc->ah; - struct ath5k_txq *txq; - struct ath5k_txq_info qi = { - .tqi_subtype = subtype, - .tqi_aifs = AR5K_TXQ_USEDEFAULT, - .tqi_cw_min = AR5K_TXQ_USEDEFAULT, - .tqi_cw_max = AR5K_TXQ_USEDEFAULT - }; - int qnum; - - /* - * Enable interrupts only for EOL and DESC conditions. - * We mark tx descriptors to receive a DESC interrupt - * when a tx queue gets deep; otherwise waiting for the - * EOL to reap descriptors. Note that this is done to - * reduce interrupt load and this only defers reaping - * descriptors, never transmitting frames. Aside from - * reducing interrupts this also permits more concurrency. - * The only potential downside is if the tx queue backs - * up in which case the top half of the kernel may backup - * due to a lack of tx descriptors. - */ - qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE | - AR5K_TXQ_FLAG_TXDESCINT_ENABLE; - qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi); - if (qnum < 0) { - DBG("ath5k: can't set up a TX queue\n"); - return -EIO; - } - - txq = &sc->txq; - if (!txq->setup) { - txq->qnum = qnum; - txq->link = NULL; - INIT_LIST_HEAD(&txq->q); - txq->setup = 1; - } - return 0; -} - -static void -ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq) -{ - struct ath5k_buf *bf, *bf0; - - list_for_each_entry_safe(bf, bf0, &txq->q, list) { - ath5k_txbuf_free(sc, bf); - - list_del(&bf->list); - list_add_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - } - txq->link = NULL; -} - -/* - * Drain the transmit queues and reclaim resources. - */ -static void -ath5k_txq_cleanup(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - - if (!(sc->status & ATH_STAT_INVALID)) { - /* don't touch the hardware if marked invalid */ - if (sc->txq.setup) { - ath5k_hw_stop_tx_dma(ah, sc->txq.qnum); - DBG("ath5k: txq [%d] %x, link %p\n", - sc->txq.qnum, - ath5k_hw_get_txdp(ah, sc->txq.qnum), - sc->txq.link); - } - } - - if (sc->txq.setup) - ath5k_txq_drainq(sc, &sc->txq); -} - -static void -ath5k_txq_release(struct ath5k_softc *sc) -{ - if (sc->txq.setup) { - ath5k_hw_release_tx_queue(sc->ah); - sc->txq.setup = 0; - } -} - - - - -/*************\ -* RX Handling * -\*************/ - -/* - * Enable the receive h/w following a reset. - */ -static int -ath5k_rx_start(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - struct ath5k_buf *bf; - int ret; - - sc->rxbufsize = IEEE80211_MAX_LEN; - if (sc->rxbufsize % sc->cachelsz != 0) - sc->rxbufsize += sc->cachelsz - (sc->rxbufsize % sc->cachelsz); - - sc->rxlink = NULL; - - list_for_each_entry(bf, &sc->rxbuf, list) { - ret = ath5k_rxbuf_setup(sc, bf); - if (ret != 0) - return ret; - } - - bf = list_entry(sc->rxbuf.next, struct ath5k_buf, list); - - ath5k_hw_set_rxdp(ah, bf->daddr); - ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */ - ath5k_mode_setup(sc); /* set filters, etc. */ - ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */ - - return 0; -} - -/* - * Disable the receive h/w in preparation for a reset. - */ -static void -ath5k_rx_stop(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - - ath5k_hw_stop_rx_pcu(ah); /* disable PCU */ - ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ - ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ - - sc->rxlink = NULL; /* just in case */ -} - -static void -ath5k_handle_rx(struct ath5k_softc *sc) -{ - struct ath5k_rx_status rs; - struct io_buffer *iob, *next_iob; - u32 next_iob_addr; - struct ath5k_buf *bf, *bf_last; - struct ath5k_desc *ds; - int ret; - - memset(&rs, 0, sizeof(rs)); - - if (list_empty(&sc->rxbuf)) { - DBG("ath5k: empty rx buf pool\n"); - return; - } - - bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list); - - do { - bf = list_entry(sc->rxbuf.next, struct ath5k_buf, list); - assert(bf->iob != NULL); - iob = bf->iob; - ds = bf->desc; - - /* - * last buffer must not be freed to ensure proper hardware - * function. When the hardware finishes also a packet next to - * it, we are sure, it doesn't use it anymore and we can go on. - */ - if (bf_last == bf) - bf->flags |= 1; - if (bf->flags) { - struct ath5k_buf *bf_next = list_entry(bf->list.next, - struct ath5k_buf, list); - ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc, - &rs); - if (ret) - break; - bf->flags &= ~1; - /* skip the overwritten one (even status is martian) */ - goto next; - } - - ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs); - if (ret) { - if (ret != -EINPROGRESS) { - DBG("ath5k: error in processing rx desc: %s\n", - strerror(ret)); - net80211_rx_err(sc->dev, NULL, -ret); - } else { - /* normal return, reached end of - available descriptors */ - } - return; - } - - if (rs.rs_more) { - DBG("ath5k: unsupported fragmented rx\n"); - goto next; - } - - if (rs.rs_status) { - if (rs.rs_status & AR5K_RXERR_PHY) { - /* These are uncommon, and may indicate a real problem. */ - net80211_rx_err(sc->dev, NULL, EIO); - goto next; - } - if (rs.rs_status & AR5K_RXERR_CRC) { - /* These occur *all the time*. */ - goto next; - } - if (rs.rs_status & AR5K_RXERR_DECRYPT) { - /* - * Decrypt error. If the error occurred - * because there was no hardware key, then - * let the frame through so the upper layers - * can process it. This is necessary for 5210 - * parts which have no way to setup a ``clear'' - * key cache entry. - * - * XXX do key cache faulting - */ - if (rs.rs_keyix == AR5K_RXKEYIX_INVALID && - !(rs.rs_status & AR5K_RXERR_CRC)) - goto accept; - } - - /* any other error, unhandled */ - DBG("ath5k: packet rx status %x\n", rs.rs_status); - goto next; - } -accept: - next_iob = ath5k_rx_iob_alloc(sc, &next_iob_addr); - - /* - * If we can't replace bf->iob with a new iob under memory - * pressure, just skip this packet - */ - if (!next_iob) { - DBG("ath5k: dropping packet under memory pressure\n"); - goto next; - } - - iob_put(iob, rs.rs_datalen); - - /* The MAC header is padded to have 32-bit boundary if the - * packet payload is non-zero. However, iPXE only - * supports standard 802.11 packets with 24-byte - * header, so no padding correction should be needed. - */ - - DBG2("ath5k: rx %d bytes, signal %d\n", rs.rs_datalen, - rs.rs_rssi); - - net80211_rx(sc->dev, iob, rs.rs_rssi, - ath5k_hw_rix_to_bitrate(rs.rs_rate)); - - bf->iob = next_iob; - bf->iobaddr = next_iob_addr; -next: - list_del(&bf->list); - list_add_tail(&bf->list, &sc->rxbuf); - } while (ath5k_rxbuf_setup(sc, bf) == 0); -} - - - - -/*************\ -* TX Handling * -\*************/ - -static void -ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) -{ - struct ath5k_tx_status ts; - struct ath5k_buf *bf, *bf0; - struct ath5k_desc *ds; - struct io_buffer *iob; - int ret; - - memset(&ts, 0, sizeof(ts)); - - list_for_each_entry_safe(bf, bf0, &txq->q, list) { - ds = bf->desc; - - ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); - if (ret) { - if (ret != -EINPROGRESS) { - DBG("ath5k: error in processing tx desc: %s\n", - strerror(ret)); - } else { - /* normal return, reached end of tx completions */ - } - break; - } - - iob = bf->iob; - bf->iob = NULL; - - DBG2("ath5k: tx %zd bytes complete, %d retries\n", - iob_len(iob), ts.ts_retry[0]); - - net80211_tx_complete(sc->dev, iob, ts.ts_retry[0], - ts.ts_status ? EIO : 0); - - list_del(&bf->list); - list_add_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - } - - if (list_empty(&txq->q)) - txq->link = NULL; -} - -static void -ath5k_handle_tx(struct ath5k_softc *sc) -{ - ath5k_tx_processq(sc, &sc->txq); -} - - -/********************\ -* Interrupt handling * -\********************/ - -static void -ath5k_irq(struct net80211_device *dev, int enable) -{ - struct ath5k_softc *sc = dev->priv; - struct ath5k_hw *ah = sc->ah; - - sc->irq_ena = enable; - ah->ah_ier = enable ? AR5K_IER_ENABLE : AR5K_IER_DISABLE; - - ath5k_hw_reg_write(ah, ah->ah_ier, AR5K_IER); - ath5k_hw_set_imr(ah, sc->imask); -} - -static int -ath5k_init(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - int ret, i; - - /* - * Stop anything previously setup. This is safe - * no matter this is the first time through or not. - */ - ath5k_stop_hw(sc); - - /* - * The basic interface to setting the hardware in a good - * state is ``reset''. On return the hardware is known to - * be powered up and with interrupts disabled. This must - * be followed by initialization of the appropriate bits - * and then setup of the interrupt mask. - */ - sc->curchan = sc->dev->channels + sc->dev->channel; - sc->curband = sc->curchan->band; - sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | - AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | - AR5K_INT_FATAL | AR5K_INT_GLOBAL; - ret = ath5k_reset(sc, NULL); - if (ret) - goto done; - - ath5k_rfkill_hw_start(ah); - - /* - * Reset the key cache since some parts do not reset the - * contents on initial power up or resume from suspend. - */ - for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) - ath5k_hw_reset_key(ah, i); - - /* Set ack to be sent at low bit-rates */ - ath5k_hw_set_ack_bitrate_high(ah, 0); - - ret = 0; -done: - mb(); - return ret; -} - -static int -ath5k_stop_hw(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - - /* - * Shutdown the hardware and driver: - * stop output from above - * disable interrupts - * turn off timers - * turn off the radio - * clear transmit machinery - * clear receive machinery - * drain and release tx queues - * reclaim beacon resources - * power down hardware - * - * Note that some of this work is not possible if the - * hardware is gone (invalid). - */ - - if (!(sc->status & ATH_STAT_INVALID)) { - ath5k_hw_set_imr(ah, 0); - } - ath5k_txq_cleanup(sc); - if (!(sc->status & ATH_STAT_INVALID)) { - ath5k_rx_stop(sc); - ath5k_hw_phy_disable(ah); - } else - sc->rxlink = NULL; - - ath5k_rfkill_hw_stop(sc->ah); - - return 0; -} - -static void -ath5k_poll(struct net80211_device *dev) -{ - struct ath5k_softc *sc = dev->priv; - struct ath5k_hw *ah = sc->ah; - enum ath5k_int status; - unsigned int counter = 1000; - - if (currticks() - sc->last_calib_ticks > - ATH5K_CALIB_INTERVAL * ticks_per_sec()) { - ath5k_calibrate(sc); - sc->last_calib_ticks = currticks(); - } - - if ((sc->status & ATH_STAT_INVALID) || - (sc->irq_ena && !ath5k_hw_is_intr_pending(ah))) - return; - - do { - ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */ - DBGP("ath5k: status %#x/%#x\n", status, sc->imask); - if (status & AR5K_INT_FATAL) { - /* - * Fatal errors are unrecoverable. - * Typically these are caused by DMA errors. - */ - DBG("ath5k: fatal error, resetting\n"); - ath5k_reset_wake(sc); - } else if (status & AR5K_INT_RXORN) { - DBG("ath5k: rx overrun, resetting\n"); - ath5k_reset_wake(sc); - } else { - if (status & AR5K_INT_RXEOL) { - /* - * NB: the hardware should re-read the link when - * RXE bit is written, but it doesn't work at - * least on older hardware revs. - */ - DBG("ath5k: rx EOL\n"); - sc->rxlink = NULL; - } - if (status & AR5K_INT_TXURN) { - /* bump tx trigger level */ - DBG("ath5k: tx underrun\n"); - ath5k_hw_update_tx_triglevel(ah, 1); - } - if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR)) - ath5k_handle_rx(sc); - if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC - | AR5K_INT_TXERR | AR5K_INT_TXEOL)) - ath5k_handle_tx(sc); - } - } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0); - - if (!counter) - DBG("ath5k: too many interrupts, giving up for now\n"); -} - -/* - * Periodically recalibrate the PHY to account - * for temperature/environment changes. - */ -static void -ath5k_calibrate(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - - if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) { - /* - * Rfgain is out of bounds, reset the chip - * to load new gain values. - */ - DBG("ath5k: resetting for calibration\n"); - ath5k_reset_wake(sc); - } - if (ath5k_hw_phy_calibrate(ah, sc->curchan)) - DBG("ath5k: calibration of channel %d failed\n", - sc->curchan->channel_nr); -} - - -/********************\ -* Net80211 functions * -\********************/ - -static int -ath5k_tx(struct net80211_device *dev, struct io_buffer *iob) -{ - struct ath5k_softc *sc = dev->priv; - struct ath5k_buf *bf; - int rc; - - /* - * The hardware expects the header padded to 4 byte boundaries. - * iPXE only ever sends 24-byte headers, so no action necessary. - */ - - if (list_empty(&sc->txbuf)) { - DBG("ath5k: dropping packet because no tx bufs available\n"); - return -ENOBUFS; - } - - bf = list_entry(sc->txbuf.next, struct ath5k_buf, list); - list_del(&bf->list); - sc->txbuf_len--; - - bf->iob = iob; - - if ((rc = ath5k_txbuf_setup(sc, bf)) != 0) { - bf->iob = NULL; - list_add_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - return rc; - } - return 0; -} - -/* - * Reset the hardware. If chan is not NULL, then also pause rx/tx - * and change to the given channel. - */ -static int -ath5k_reset(struct ath5k_softc *sc, struct net80211_channel *chan) -{ - struct ath5k_hw *ah = sc->ah; - int ret; - - if (chan) { - ath5k_hw_set_imr(ah, 0); - ath5k_txq_cleanup(sc); - ath5k_rx_stop(sc); - - sc->curchan = chan; - sc->curband = chan->band; - } - - ret = ath5k_hw_reset(ah, sc->curchan, 1); - if (ret) { - DBG("ath5k: can't reset hardware: %s\n", strerror(ret)); - return ret; - } - - ret = ath5k_rx_start(sc); - if (ret) { - DBG("ath5k: can't start rx logic: %s\n", strerror(ret)); - return ret; - } - - /* - * Change channels and update the h/w rate map if we're switching; - * e.g. 11a to 11b/g. - * - * We may be doing a reset in response to an ioctl that changes the - * channel so update any state that might change as a result. - * - * XXX needed? - */ -/* ath5k_chan_change(sc, c); */ - - /* Reenable interrupts if necessary */ - ath5k_irq(sc->dev, sc->irq_ena); - - return 0; -} - -static int ath5k_reset_wake(struct ath5k_softc *sc) -{ - return ath5k_reset(sc, sc->curchan); -} - -static int ath5k_start(struct net80211_device *dev) -{ - struct ath5k_softc *sc = dev->priv; - int ret; - - if ((ret = ath5k_init(sc)) != 0) - return ret; - - sc->assoc = 0; - ath5k_configure_filter(sc); - ath5k_hw_set_lladdr(sc->ah, dev->netdev->ll_addr); - - return 0; -} - -static void ath5k_stop(struct net80211_device *dev) -{ - struct ath5k_softc *sc = dev->priv; - u8 mac[ETH_ALEN] = {}; - - ath5k_hw_set_lladdr(sc->ah, mac); - - ath5k_stop_hw(sc); -} - -static int -ath5k_config(struct net80211_device *dev, int changed) -{ - struct ath5k_softc *sc = dev->priv; - struct ath5k_hw *ah = sc->ah; - struct net80211_channel *chan = &dev->channels[dev->channel]; - int ret; - - if (changed & NET80211_CFG_CHANNEL) { - sc->power_level = chan->maxpower; - if ((ret = ath5k_chan_set(sc, chan)) != 0) - return ret; - } - - if ((changed & NET80211_CFG_RATE) || - (changed & NET80211_CFG_PHY_PARAMS)) { - int spmbl = ATH5K_SPMBL_NO; - u16 rate = dev->rates[dev->rate]; - u16 slowrate = dev->rates[dev->rtscts_rate]; - int i; - - if (dev->phy_flags & NET80211_PHY_USE_SHORT_PREAMBLE) - spmbl = ATH5K_SPMBL_YES; - - for (i = 0; i < ATH5K_NR_RATES; i++) { - if (ath5k_rates[i].bitrate == rate && - (ath5k_rates[i].short_pmbl & spmbl)) - sc->hw_rate = ath5k_rates[i].hw_code; - - if (ath5k_rates[i].bitrate == slowrate && - (ath5k_rates[i].short_pmbl & spmbl)) - sc->hw_rtscts_rate = ath5k_rates[i].hw_code; - } - } - - if (changed & NET80211_CFG_ASSOC) { - sc->assoc = !!(dev->state & NET80211_ASSOCIATED); - if (sc->assoc) { - memcpy(ah->ah_bssid, dev->bssid, ETH_ALEN); - } else { - memset(ah->ah_bssid, 0xff, ETH_ALEN); - } - ath5k_hw_set_associd(ah, ah->ah_bssid, 0); - } - - return 0; -} - -/* - * o always accept unicast, broadcast, and multicast traffic - * o multicast traffic for all BSSIDs will be enabled if mac80211 - * says it should be - * o maintain current state of phy ofdm or phy cck error reception. - * If the hardware detects any of these type of errors then - * ath5k_hw_get_rx_filter() will pass to us the respective - * hardware filters to be able to receive these type of frames. - * o probe request frames are accepted only when operating in - * hostap, adhoc, or monitor modes - * o enable promiscuous mode according to the interface state - * o accept beacons: - * - when operating in adhoc mode so the 802.11 layer creates - * node table entries for peers, - * - when operating in station mode for collecting rssi data when - * the station is otherwise quiet, or - * - when scanning - */ -static void ath5k_configure_filter(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - u32 mfilt[2], rfilt; - - /* Enable all multicast */ - mfilt[0] = ~0; - mfilt[1] = ~0; - - /* Enable data frames and beacons */ - rfilt = (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST | - AR5K_RX_FILTER_MCAST | AR5K_RX_FILTER_BEACON); - - /* Set filters */ - ath5k_hw_set_rx_filter(ah, rfilt); - - /* Set multicast bits */ - ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]); - - /* Set the cached hw filter flags, this will alter actually - * be set in HW */ - sc->filter_flags = rfilt; -} |