Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 86 insertions, 0 deletions

diff --git a/qemu/roms/ipxe/src/drivers/bus/pciextra.c b/qemu/roms/ipxe/src/drivers/bus/pciextra.c
new file mode 100644
index 000000000..c4417e0cb
--- /dev/null
+++ b/qemu/roms/ipxe/src/drivers/bus/pciextra.c
@@ -0,0 +1,86 @@
+FILE_LICENCE ( GPL2_OR_LATER );
+
+#include <stdint.h>
+#include <ipxe/pci.h>
+
+/**
+ * Look for a PCI capability
+ *
+ * @v pci		PCI device to query
+ * @v cap		Capability code
+ * @ret address		Address of capability, or 0 if not found
+ *
+ * Determine whether or not a device supports a given PCI capability.
+ * Returns the address of the requested capability structure within
+ * the device's PCI configuration space, or 0 if the device does not
+ * support it.
+ */
+int pci_find_capability ( struct pci_device *pci, int cap ) {
+	uint16_t status;
+	uint8_t pos, id;
+	uint8_t hdr_type;
+	int ttl = 48;
+
+	pci_read_config_word ( pci, PCI_STATUS, &status );
+	if ( ! ( status & PCI_STATUS_CAP_LIST ) )
+		return 0;
+
+	pci_read_config_byte ( pci, PCI_HEADER_TYPE, &hdr_type );
+	switch ( hdr_type & 0x7F ) {
+	case PCI_HEADER_TYPE_NORMAL:
+	case PCI_HEADER_TYPE_BRIDGE:
+	default:
+		pci_read_config_byte ( pci, PCI_CAPABILITY_LIST, &pos );
+		break;
+	case PCI_HEADER_TYPE_CARDBUS:
+		pci_read_config_byte ( pci, PCI_CB_CAPABILITY_LIST, &pos );
+		break;
+	}
+	while ( ttl-- && pos >= 0x40 ) {
+		pos &= ~3;
+		pci_read_config_byte ( pci, pos + PCI_CAP_LIST_ID, &id );
+		DBG ( "PCI Capability: %d\n", id );
+		if ( id == 0xff )
+			break;
+		if ( id == cap )
+			return pos;
+		pci_read_config_byte ( pci, pos + PCI_CAP_LIST_NEXT, &pos );
+	}
+	return 0;
+}
+
+/**
+ * Find the size of a PCI BAR
+ *
+ * @v pci		PCI device
+ * @v reg		PCI register number
+ * @ret size		BAR size
+ *
+ * It should not be necessary for any Etherboot code to call this
+ * function.
+ */
+unsigned long pci_bar_size ( struct pci_device *pci, unsigned int reg ) {
+	uint16_t cmd;
+	uint32_t start, size;
+
+	/* Save the original command register */
+	pci_read_config_word ( pci, PCI_COMMAND, &cmd );
+	/* Save the original bar */
+	pci_read_config_dword ( pci, reg, &start );
+	/* Compute which bits can be set */
+	pci_write_config_dword ( pci, reg, ~0 );
+	pci_read_config_dword ( pci, reg, &size );
+	/* Restore the original size */
+	pci_write_config_dword ( pci, reg, start );
+	/* Find the significant bits */
+	/* Restore the original command register. This reenables decoding. */
+	pci_write_config_word ( pci, PCI_COMMAND, cmd );
+	if ( start & PCI_BASE_ADDRESS_SPACE_IO ) {
+		size &= PCI_BASE_ADDRESS_IO_MASK;
+	} else {
+		size &= PCI_BASE_ADDRESS_MEM_MASK;
+	}
+	/* Find the lowest bit set */
+	size = size & ~( size - 1 );
+	return size;
+}