summaryrefslogtreecommitdiffstats
path: root/qemu/hw/scsi/lsi53c895a.c
diff options
context:
space:
mode:
authorYang Zhang <yang.z.zhang@intel.com>2015-08-28 09:58:54 +0800
committerYang Zhang <yang.z.zhang@intel.com>2015-09-01 12:44:00 +0800
commite44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch)
tree66b09f592c55df2878107a468a91d21506104d3f /qemu/hw/scsi/lsi53c895a.c
parent9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff)
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5 Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/hw/scsi/lsi53c895a.c')
-rw-r--r--qemu/hw/scsi/lsi53c895a.c2163
1 files changed, 2163 insertions, 0 deletions
diff --git a/qemu/hw/scsi/lsi53c895a.c b/qemu/hw/scsi/lsi53c895a.c
new file mode 100644
index 000000000..c5b0cc5ca
--- /dev/null
+++ b/qemu/hw/scsi/lsi53c895a.c
@@ -0,0 +1,2163 @@
+/*
+ * QEMU LSI53C895A SCSI Host Bus Adapter emulation
+ *
+ * Copyright (c) 2006 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the LGPL.
+ */
+
+/* Note:
+ * LSI53C810 emulation is incorrect, in the sense that it supports
+ * features added in later evolutions. This should not be a problem,
+ * as well-behaved operating systems will not try to use them.
+ */
+
+#include <assert.h>
+
+#include "hw/hw.h"
+#include "hw/pci/pci.h"
+#include "hw/scsi/scsi.h"
+#include "sysemu/dma.h"
+
+//#define DEBUG_LSI
+//#define DEBUG_LSI_REG
+
+#ifdef DEBUG_LSI
+#define DPRINTF(fmt, ...) \
+do { printf("lsi_scsi: " fmt , ## __VA_ARGS__); } while (0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "lsi_scsi: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while(0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "lsi_scsi: error: " fmt , ## __VA_ARGS__);} while (0)
+#endif
+
+#define LSI_MAX_DEVS 7
+
+#define LSI_SCNTL0_TRG 0x01
+#define LSI_SCNTL0_AAP 0x02
+#define LSI_SCNTL0_EPC 0x08
+#define LSI_SCNTL0_WATN 0x10
+#define LSI_SCNTL0_START 0x20
+
+#define LSI_SCNTL1_SST 0x01
+#define LSI_SCNTL1_IARB 0x02
+#define LSI_SCNTL1_AESP 0x04
+#define LSI_SCNTL1_RST 0x08
+#define LSI_SCNTL1_CON 0x10
+#define LSI_SCNTL1_DHP 0x20
+#define LSI_SCNTL1_ADB 0x40
+#define LSI_SCNTL1_EXC 0x80
+
+#define LSI_SCNTL2_WSR 0x01
+#define LSI_SCNTL2_VUE0 0x02
+#define LSI_SCNTL2_VUE1 0x04
+#define LSI_SCNTL2_WSS 0x08
+#define LSI_SCNTL2_SLPHBEN 0x10
+#define LSI_SCNTL2_SLPMD 0x20
+#define LSI_SCNTL2_CHM 0x40
+#define LSI_SCNTL2_SDU 0x80
+
+#define LSI_ISTAT0_DIP 0x01
+#define LSI_ISTAT0_SIP 0x02
+#define LSI_ISTAT0_INTF 0x04
+#define LSI_ISTAT0_CON 0x08
+#define LSI_ISTAT0_SEM 0x10
+#define LSI_ISTAT0_SIGP 0x20
+#define LSI_ISTAT0_SRST 0x40
+#define LSI_ISTAT0_ABRT 0x80
+
+#define LSI_ISTAT1_SI 0x01
+#define LSI_ISTAT1_SRUN 0x02
+#define LSI_ISTAT1_FLSH 0x04
+
+#define LSI_SSTAT0_SDP0 0x01
+#define LSI_SSTAT0_RST 0x02
+#define LSI_SSTAT0_WOA 0x04
+#define LSI_SSTAT0_LOA 0x08
+#define LSI_SSTAT0_AIP 0x10
+#define LSI_SSTAT0_OLF 0x20
+#define LSI_SSTAT0_ORF 0x40
+#define LSI_SSTAT0_ILF 0x80
+
+#define LSI_SIST0_PAR 0x01
+#define LSI_SIST0_RST 0x02
+#define LSI_SIST0_UDC 0x04
+#define LSI_SIST0_SGE 0x08
+#define LSI_SIST0_RSL 0x10
+#define LSI_SIST0_SEL 0x20
+#define LSI_SIST0_CMP 0x40
+#define LSI_SIST0_MA 0x80
+
+#define LSI_SIST1_HTH 0x01
+#define LSI_SIST1_GEN 0x02
+#define LSI_SIST1_STO 0x04
+#define LSI_SIST1_SBMC 0x10
+
+#define LSI_SOCL_IO 0x01
+#define LSI_SOCL_CD 0x02
+#define LSI_SOCL_MSG 0x04
+#define LSI_SOCL_ATN 0x08
+#define LSI_SOCL_SEL 0x10
+#define LSI_SOCL_BSY 0x20
+#define LSI_SOCL_ACK 0x40
+#define LSI_SOCL_REQ 0x80
+
+#define LSI_DSTAT_IID 0x01
+#define LSI_DSTAT_SIR 0x04
+#define LSI_DSTAT_SSI 0x08
+#define LSI_DSTAT_ABRT 0x10
+#define LSI_DSTAT_BF 0x20
+#define LSI_DSTAT_MDPE 0x40
+#define LSI_DSTAT_DFE 0x80
+
+#define LSI_DCNTL_COM 0x01
+#define LSI_DCNTL_IRQD 0x02
+#define LSI_DCNTL_STD 0x04
+#define LSI_DCNTL_IRQM 0x08
+#define LSI_DCNTL_SSM 0x10
+#define LSI_DCNTL_PFEN 0x20
+#define LSI_DCNTL_PFF 0x40
+#define LSI_DCNTL_CLSE 0x80
+
+#define LSI_DMODE_MAN 0x01
+#define LSI_DMODE_BOF 0x02
+#define LSI_DMODE_ERMP 0x04
+#define LSI_DMODE_ERL 0x08
+#define LSI_DMODE_DIOM 0x10
+#define LSI_DMODE_SIOM 0x20
+
+#define LSI_CTEST2_DACK 0x01
+#define LSI_CTEST2_DREQ 0x02
+#define LSI_CTEST2_TEOP 0x04
+#define LSI_CTEST2_PCICIE 0x08
+#define LSI_CTEST2_CM 0x10
+#define LSI_CTEST2_CIO 0x20
+#define LSI_CTEST2_SIGP 0x40
+#define LSI_CTEST2_DDIR 0x80
+
+#define LSI_CTEST5_BL2 0x04
+#define LSI_CTEST5_DDIR 0x08
+#define LSI_CTEST5_MASR 0x10
+#define LSI_CTEST5_DFSN 0x20
+#define LSI_CTEST5_BBCK 0x40
+#define LSI_CTEST5_ADCK 0x80
+
+#define LSI_CCNTL0_DILS 0x01
+#define LSI_CCNTL0_DISFC 0x10
+#define LSI_CCNTL0_ENNDJ 0x20
+#define LSI_CCNTL0_PMJCTL 0x40
+#define LSI_CCNTL0_ENPMJ 0x80
+
+#define LSI_CCNTL1_EN64DBMV 0x01
+#define LSI_CCNTL1_EN64TIBMV 0x02
+#define LSI_CCNTL1_64TIMOD 0x04
+#define LSI_CCNTL1_DDAC 0x08
+#define LSI_CCNTL1_ZMOD 0x80
+
+/* Enable Response to Reselection */
+#define LSI_SCID_RRE 0x60
+
+#define LSI_CCNTL1_40BIT (LSI_CCNTL1_EN64TIBMV|LSI_CCNTL1_64TIMOD)
+
+#define PHASE_DO 0
+#define PHASE_DI 1
+#define PHASE_CMD 2
+#define PHASE_ST 3
+#define PHASE_MO 6
+#define PHASE_MI 7
+#define PHASE_MASK 7
+
+/* Maximum length of MSG IN data. */
+#define LSI_MAX_MSGIN_LEN 8
+
+/* Flag set if this is a tagged command. */
+#define LSI_TAG_VALID (1 << 16)
+
+typedef struct lsi_request {
+ SCSIRequest *req;
+ uint32_t tag;
+ uint32_t dma_len;
+ uint8_t *dma_buf;
+ uint32_t pending;
+ int out;
+ QTAILQ_ENTRY(lsi_request) next;
+} lsi_request;
+
+typedef struct {
+ /*< private >*/
+ PCIDevice parent_obj;
+ /*< public >*/
+
+ MemoryRegion mmio_io;
+ MemoryRegion ram_io;
+ MemoryRegion io_io;
+
+ int carry; /* ??? Should this be an a visible register somewhere? */
+ int status;
+ /* Action to take at the end of a MSG IN phase.
+ 0 = COMMAND, 1 = disconnect, 2 = DATA OUT, 3 = DATA IN. */
+ int msg_action;
+ int msg_len;
+ uint8_t msg[LSI_MAX_MSGIN_LEN];
+ /* 0 if SCRIPTS are running or stopped.
+ * 1 if a Wait Reselect instruction has been issued.
+ * 2 if processing DMA from lsi_execute_script.
+ * 3 if a DMA operation is in progress. */
+ int waiting;
+ SCSIBus bus;
+ int current_lun;
+ /* The tag is a combination of the device ID and the SCSI tag. */
+ uint32_t select_tag;
+ int command_complete;
+ QTAILQ_HEAD(, lsi_request) queue;
+ lsi_request *current;
+
+ uint32_t dsa;
+ uint32_t temp;
+ uint32_t dnad;
+ uint32_t dbc;
+ uint8_t istat0;
+ uint8_t istat1;
+ uint8_t dcmd;
+ uint8_t dstat;
+ uint8_t dien;
+ uint8_t sist0;
+ uint8_t sist1;
+ uint8_t sien0;
+ uint8_t sien1;
+ uint8_t mbox0;
+ uint8_t mbox1;
+ uint8_t dfifo;
+ uint8_t ctest2;
+ uint8_t ctest3;
+ uint8_t ctest4;
+ uint8_t ctest5;
+ uint8_t ccntl0;
+ uint8_t ccntl1;
+ uint32_t dsp;
+ uint32_t dsps;
+ uint8_t dmode;
+ uint8_t dcntl;
+ uint8_t scntl0;
+ uint8_t scntl1;
+ uint8_t scntl2;
+ uint8_t scntl3;
+ uint8_t sstat0;
+ uint8_t sstat1;
+ uint8_t scid;
+ uint8_t sxfer;
+ uint8_t socl;
+ uint8_t sdid;
+ uint8_t ssid;
+ uint8_t sfbr;
+ uint8_t stest1;
+ uint8_t stest2;
+ uint8_t stest3;
+ uint8_t sidl;
+ uint8_t stime0;
+ uint8_t respid0;
+ uint8_t respid1;
+ uint32_t mmrs;
+ uint32_t mmws;
+ uint32_t sfs;
+ uint32_t drs;
+ uint32_t sbms;
+ uint32_t dbms;
+ uint32_t dnad64;
+ uint32_t pmjad1;
+ uint32_t pmjad2;
+ uint32_t rbc;
+ uint32_t ua;
+ uint32_t ia;
+ uint32_t sbc;
+ uint32_t csbc;
+ uint32_t scratch[18]; /* SCRATCHA-SCRATCHR */
+ uint8_t sbr;
+ uint32_t adder;
+
+ /* Script ram is stored as 32-bit words in host byteorder. */
+ uint32_t script_ram[2048];
+} LSIState;
+
+#define TYPE_LSI53C810 "lsi53c810"
+#define TYPE_LSI53C895A "lsi53c895a"
+
+#define LSI53C895A(obj) \
+ OBJECT_CHECK(LSIState, (obj), TYPE_LSI53C895A)
+
+static inline int lsi_irq_on_rsl(LSIState *s)
+{
+ return (s->sien0 & LSI_SIST0_RSL) && (s->scid & LSI_SCID_RRE);
+}
+
+static void lsi_soft_reset(LSIState *s)
+{
+ DPRINTF("Reset\n");
+ s->carry = 0;
+
+ s->msg_action = 0;
+ s->msg_len = 0;
+ s->waiting = 0;
+ s->dsa = 0;
+ s->dnad = 0;
+ s->dbc = 0;
+ s->temp = 0;
+ memset(s->scratch, 0, sizeof(s->scratch));
+ s->istat0 = 0;
+ s->istat1 = 0;
+ s->dcmd = 0x40;
+ s->dstat = LSI_DSTAT_DFE;
+ s->dien = 0;
+ s->sist0 = 0;
+ s->sist1 = 0;
+ s->sien0 = 0;
+ s->sien1 = 0;
+ s->mbox0 = 0;
+ s->mbox1 = 0;
+ s->dfifo = 0;
+ s->ctest2 = LSI_CTEST2_DACK;
+ s->ctest3 = 0;
+ s->ctest4 = 0;
+ s->ctest5 = 0;
+ s->ccntl0 = 0;
+ s->ccntl1 = 0;
+ s->dsp = 0;
+ s->dsps = 0;
+ s->dmode = 0;
+ s->dcntl = 0;
+ s->scntl0 = 0xc0;
+ s->scntl1 = 0;
+ s->scntl2 = 0;
+ s->scntl3 = 0;
+ s->sstat0 = 0;
+ s->sstat1 = 0;
+ s->scid = 7;
+ s->sxfer = 0;
+ s->socl = 0;
+ s->sdid = 0;
+ s->ssid = 0;
+ s->stest1 = 0;
+ s->stest2 = 0;
+ s->stest3 = 0;
+ s->sidl = 0;
+ s->stime0 = 0;
+ s->respid0 = 0x80;
+ s->respid1 = 0;
+ s->mmrs = 0;
+ s->mmws = 0;
+ s->sfs = 0;
+ s->drs = 0;
+ s->sbms = 0;
+ s->dbms = 0;
+ s->dnad64 = 0;
+ s->pmjad1 = 0;
+ s->pmjad2 = 0;
+ s->rbc = 0;
+ s->ua = 0;
+ s->ia = 0;
+ s->sbc = 0;
+ s->csbc = 0;
+ s->sbr = 0;
+ assert(QTAILQ_EMPTY(&s->queue));
+ assert(!s->current);
+}
+
+static int lsi_dma_40bit(LSIState *s)
+{
+ if ((s->ccntl1 & LSI_CCNTL1_40BIT) == LSI_CCNTL1_40BIT)
+ return 1;
+ return 0;
+}
+
+static int lsi_dma_ti64bit(LSIState *s)
+{
+ if ((s->ccntl1 & LSI_CCNTL1_EN64TIBMV) == LSI_CCNTL1_EN64TIBMV)
+ return 1;
+ return 0;
+}
+
+static int lsi_dma_64bit(LSIState *s)
+{
+ if ((s->ccntl1 & LSI_CCNTL1_EN64DBMV) == LSI_CCNTL1_EN64DBMV)
+ return 1;
+ return 0;
+}
+
+static uint8_t lsi_reg_readb(LSIState *s, int offset);
+static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val);
+static void lsi_execute_script(LSIState *s);
+static void lsi_reselect(LSIState *s, lsi_request *p);
+
+static inline uint32_t read_dword(LSIState *s, uint32_t addr)
+{
+ uint32_t buf;
+
+ pci_dma_read(PCI_DEVICE(s), addr, &buf, 4);
+ return cpu_to_le32(buf);
+}
+
+static void lsi_stop_script(LSIState *s)
+{
+ s->istat1 &= ~LSI_ISTAT1_SRUN;
+}
+
+static void lsi_update_irq(LSIState *s)
+{
+ PCIDevice *d = PCI_DEVICE(s);
+ int level;
+ static int last_level;
+ lsi_request *p;
+
+ /* It's unclear whether the DIP/SIP bits should be cleared when the
+ Interrupt Status Registers are cleared or when istat0 is read.
+ We currently do the formwer, which seems to work. */
+ level = 0;
+ if (s->dstat) {
+ if (s->dstat & s->dien)
+ level = 1;
+ s->istat0 |= LSI_ISTAT0_DIP;
+ } else {
+ s->istat0 &= ~LSI_ISTAT0_DIP;
+ }
+
+ if (s->sist0 || s->sist1) {
+ if ((s->sist0 & s->sien0) || (s->sist1 & s->sien1))
+ level = 1;
+ s->istat0 |= LSI_ISTAT0_SIP;
+ } else {
+ s->istat0 &= ~LSI_ISTAT0_SIP;
+ }
+ if (s->istat0 & LSI_ISTAT0_INTF)
+ level = 1;
+
+ if (level != last_level) {
+ DPRINTF("Update IRQ level %d dstat %02x sist %02x%02x\n",
+ level, s->dstat, s->sist1, s->sist0);
+ last_level = level;
+ }
+ pci_set_irq(d, level);
+
+ if (!level && lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON)) {
+ DPRINTF("Handled IRQs & disconnected, looking for pending "
+ "processes\n");
+ QTAILQ_FOREACH(p, &s->queue, next) {
+ if (p->pending) {
+ lsi_reselect(s, p);
+ break;
+ }
+ }
+ }
+}
+
+/* Stop SCRIPTS execution and raise a SCSI interrupt. */
+static void lsi_script_scsi_interrupt(LSIState *s, int stat0, int stat1)
+{
+ uint32_t mask0;
+ uint32_t mask1;
+
+ DPRINTF("SCSI Interrupt 0x%02x%02x prev 0x%02x%02x\n",
+ stat1, stat0, s->sist1, s->sist0);
+ s->sist0 |= stat0;
+ s->sist1 |= stat1;
+ /* Stop processor on fatal or unmasked interrupt. As a special hack
+ we don't stop processing when raising STO. Instead continue
+ execution and stop at the next insn that accesses the SCSI bus. */
+ mask0 = s->sien0 | ~(LSI_SIST0_CMP | LSI_SIST0_SEL | LSI_SIST0_RSL);
+ mask1 = s->sien1 | ~(LSI_SIST1_GEN | LSI_SIST1_HTH);
+ mask1 &= ~LSI_SIST1_STO;
+ if (s->sist0 & mask0 || s->sist1 & mask1) {
+ lsi_stop_script(s);
+ }
+ lsi_update_irq(s);
+}
+
+/* Stop SCRIPTS execution and raise a DMA interrupt. */
+static void lsi_script_dma_interrupt(LSIState *s, int stat)
+{
+ DPRINTF("DMA Interrupt 0x%x prev 0x%x\n", stat, s->dstat);
+ s->dstat |= stat;
+ lsi_update_irq(s);
+ lsi_stop_script(s);
+}
+
+static inline void lsi_set_phase(LSIState *s, int phase)
+{
+ s->sstat1 = (s->sstat1 & ~PHASE_MASK) | phase;
+}
+
+static void lsi_bad_phase(LSIState *s, int out, int new_phase)
+{
+ /* Trigger a phase mismatch. */
+ if (s->ccntl0 & LSI_CCNTL0_ENPMJ) {
+ if ((s->ccntl0 & LSI_CCNTL0_PMJCTL)) {
+ s->dsp = out ? s->pmjad1 : s->pmjad2;
+ } else {
+ s->dsp = (s->scntl2 & LSI_SCNTL2_WSR ? s->pmjad2 : s->pmjad1);
+ }
+ DPRINTF("Data phase mismatch jump to %08x\n", s->dsp);
+ } else {
+ DPRINTF("Phase mismatch interrupt\n");
+ lsi_script_scsi_interrupt(s, LSI_SIST0_MA, 0);
+ lsi_stop_script(s);
+ }
+ lsi_set_phase(s, new_phase);
+}
+
+
+/* Resume SCRIPTS execution after a DMA operation. */
+static void lsi_resume_script(LSIState *s)
+{
+ if (s->waiting != 2) {
+ s->waiting = 0;
+ lsi_execute_script(s);
+ } else {
+ s->waiting = 0;
+ }
+}
+
+static void lsi_disconnect(LSIState *s)
+{
+ s->scntl1 &= ~LSI_SCNTL1_CON;
+ s->sstat1 &= ~PHASE_MASK;
+}
+
+static void lsi_bad_selection(LSIState *s, uint32_t id)
+{
+ DPRINTF("Selected absent target %d\n", id);
+ lsi_script_scsi_interrupt(s, 0, LSI_SIST1_STO);
+ lsi_disconnect(s);
+}
+
+/* Initiate a SCSI layer data transfer. */
+static void lsi_do_dma(LSIState *s, int out)
+{
+ PCIDevice *pci_dev;
+ uint32_t count;
+ dma_addr_t addr;
+ SCSIDevice *dev;
+
+ assert(s->current);
+ if (!s->current->dma_len) {
+ /* Wait until data is available. */
+ DPRINTF("DMA no data available\n");
+ return;
+ }
+
+ pci_dev = PCI_DEVICE(s);
+ dev = s->current->req->dev;
+ assert(dev);
+
+ count = s->dbc;
+ if (count > s->current->dma_len)
+ count = s->current->dma_len;
+
+ addr = s->dnad;
+ /* both 40 and Table Indirect 64-bit DMAs store upper bits in dnad64 */
+ if (lsi_dma_40bit(s) || lsi_dma_ti64bit(s))
+ addr |= ((uint64_t)s->dnad64 << 32);
+ else if (s->dbms)
+ addr |= ((uint64_t)s->dbms << 32);
+ else if (s->sbms)
+ addr |= ((uint64_t)s->sbms << 32);
+
+ DPRINTF("DMA addr=0x" DMA_ADDR_FMT " len=%d\n", addr, count);
+ s->csbc += count;
+ s->dnad += count;
+ s->dbc -= count;
+ if (s->current->dma_buf == NULL) {
+ s->current->dma_buf = scsi_req_get_buf(s->current->req);
+ }
+ /* ??? Set SFBR to first data byte. */
+ if (out) {
+ pci_dma_read(pci_dev, addr, s->current->dma_buf, count);
+ } else {
+ pci_dma_write(pci_dev, addr, s->current->dma_buf, count);
+ }
+ s->current->dma_len -= count;
+ if (s->current->dma_len == 0) {
+ s->current->dma_buf = NULL;
+ scsi_req_continue(s->current->req);
+ } else {
+ s->current->dma_buf += count;
+ lsi_resume_script(s);
+ }
+}
+
+
+/* Add a command to the queue. */
+static void lsi_queue_command(LSIState *s)
+{
+ lsi_request *p = s->current;
+
+ DPRINTF("Queueing tag=0x%x\n", p->tag);
+ assert(s->current != NULL);
+ assert(s->current->dma_len == 0);
+ QTAILQ_INSERT_TAIL(&s->queue, s->current, next);
+ s->current = NULL;
+
+ p->pending = 0;
+ p->out = (s->sstat1 & PHASE_MASK) == PHASE_DO;
+}
+
+/* Queue a byte for a MSG IN phase. */
+static void lsi_add_msg_byte(LSIState *s, uint8_t data)
+{
+ if (s->msg_len >= LSI_MAX_MSGIN_LEN) {
+ BADF("MSG IN data too long\n");
+ } else {
+ DPRINTF("MSG IN 0x%02x\n", data);
+ s->msg[s->msg_len++] = data;
+ }
+}
+
+/* Perform reselection to continue a command. */
+static void lsi_reselect(LSIState *s, lsi_request *p)
+{
+ int id;
+
+ assert(s->current == NULL);
+ QTAILQ_REMOVE(&s->queue, p, next);
+ s->current = p;
+
+ id = (p->tag >> 8) & 0xf;
+ s->ssid = id | 0x80;
+ /* LSI53C700 Family Compatibility, see LSI53C895A 4-73 */
+ if (!(s->dcntl & LSI_DCNTL_COM)) {
+ s->sfbr = 1 << (id & 0x7);
+ }
+ DPRINTF("Reselected target %d\n", id);
+ s->scntl1 |= LSI_SCNTL1_CON;
+ lsi_set_phase(s, PHASE_MI);
+ s->msg_action = p->out ? 2 : 3;
+ s->current->dma_len = p->pending;
+ lsi_add_msg_byte(s, 0x80);
+ if (s->current->tag & LSI_TAG_VALID) {
+ lsi_add_msg_byte(s, 0x20);
+ lsi_add_msg_byte(s, p->tag & 0xff);
+ }
+
+ if (lsi_irq_on_rsl(s)) {
+ lsi_script_scsi_interrupt(s, LSI_SIST0_RSL, 0);
+ }
+}
+
+static lsi_request *lsi_find_by_tag(LSIState *s, uint32_t tag)
+{
+ lsi_request *p;
+
+ QTAILQ_FOREACH(p, &s->queue, next) {
+ if (p->tag == tag) {
+ return p;
+ }
+ }
+
+ return NULL;
+}
+
+static void lsi_request_free(LSIState *s, lsi_request *p)
+{
+ if (p == s->current) {
+ s->current = NULL;
+ } else {
+ QTAILQ_REMOVE(&s->queue, p, next);
+ }
+ g_free(p);
+}
+
+static void lsi_request_cancelled(SCSIRequest *req)
+{
+ LSIState *s = LSI53C895A(req->bus->qbus.parent);
+ lsi_request *p = req->hba_private;
+
+ req->hba_private = NULL;
+ lsi_request_free(s, p);
+ scsi_req_unref(req);
+}
+
+/* Record that data is available for a queued command. Returns zero if
+ the device was reselected, nonzero if the IO is deferred. */
+static int lsi_queue_req(LSIState *s, SCSIRequest *req, uint32_t len)
+{
+ lsi_request *p = req->hba_private;
+
+ if (p->pending) {
+ BADF("Multiple IO pending for request %p\n", p);
+ }
+ p->pending = len;
+ /* Reselect if waiting for it, or if reselection triggers an IRQ
+ and the bus is free.
+ Since no interrupt stacking is implemented in the emulation, it
+ is also required that there are no pending interrupts waiting
+ for service from the device driver. */
+ if (s->waiting == 1 ||
+ (lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON) &&
+ !(s->istat0 & (LSI_ISTAT0_SIP | LSI_ISTAT0_DIP)))) {
+ /* Reselect device. */
+ lsi_reselect(s, p);
+ return 0;
+ } else {
+ DPRINTF("Queueing IO tag=0x%x\n", p->tag);
+ p->pending = len;
+ return 1;
+ }
+}
+
+ /* Callback to indicate that the SCSI layer has completed a command. */
+static void lsi_command_complete(SCSIRequest *req, uint32_t status, size_t resid)
+{
+ LSIState *s = LSI53C895A(req->bus->qbus.parent);
+ int out;
+
+ out = (s->sstat1 & PHASE_MASK) == PHASE_DO;
+ DPRINTF("Command complete status=%d\n", (int)status);
+ s->status = status;
+ s->command_complete = 2;
+ if (s->waiting && s->dbc != 0) {
+ /* Raise phase mismatch for short transfers. */
+ lsi_bad_phase(s, out, PHASE_ST);
+ } else {
+ lsi_set_phase(s, PHASE_ST);
+ }
+
+ if (req->hba_private == s->current) {
+ req->hba_private = NULL;
+ lsi_request_free(s, s->current);
+ scsi_req_unref(req);
+ }
+ lsi_resume_script(s);
+}
+
+ /* Callback to indicate that the SCSI layer has completed a transfer. */
+static void lsi_transfer_data(SCSIRequest *req, uint32_t len)
+{
+ LSIState *s = LSI53C895A(req->bus->qbus.parent);
+ int out;
+
+ assert(req->hba_private);
+ if (s->waiting == 1 || req->hba_private != s->current ||
+ (lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON))) {
+ if (lsi_queue_req(s, req, len)) {
+ return;
+ }
+ }
+
+ out = (s->sstat1 & PHASE_MASK) == PHASE_DO;
+
+ /* host adapter (re)connected */
+ DPRINTF("Data ready tag=0x%x len=%d\n", req->tag, len);
+ s->current->dma_len = len;
+ s->command_complete = 1;
+ if (s->waiting) {
+ if (s->waiting == 1 || s->dbc == 0) {
+ lsi_resume_script(s);
+ } else {
+ lsi_do_dma(s, out);
+ }
+ }
+}
+
+static void lsi_do_command(LSIState *s)
+{
+ SCSIDevice *dev;
+ uint8_t buf[16];
+ uint32_t id;
+ int n;
+
+ DPRINTF("Send command len=%d\n", s->dbc);
+ if (s->dbc > 16)
+ s->dbc = 16;
+ pci_dma_read(PCI_DEVICE(s), s->dnad, buf, s->dbc);
+ s->sfbr = buf[0];
+ s->command_complete = 0;
+
+ id = (s->select_tag >> 8) & 0xf;
+ dev = scsi_device_find(&s->bus, 0, id, s->current_lun);
+ if (!dev) {
+ lsi_bad_selection(s, id);
+ return;
+ }
+
+ assert(s->current == NULL);
+ s->current = g_new0(lsi_request, 1);
+ s->current->tag = s->select_tag;
+ s->current->req = scsi_req_new(dev, s->current->tag, s->current_lun, buf,
+ s->current);
+
+ n = scsi_req_enqueue(s->current->req);
+ if (n) {
+ if (n > 0) {
+ lsi_set_phase(s, PHASE_DI);
+ } else if (n < 0) {
+ lsi_set_phase(s, PHASE_DO);
+ }
+ scsi_req_continue(s->current->req);
+ }
+ if (!s->command_complete) {
+ if (n) {
+ /* Command did not complete immediately so disconnect. */
+ lsi_add_msg_byte(s, 2); /* SAVE DATA POINTER */
+ lsi_add_msg_byte(s, 4); /* DISCONNECT */
+ /* wait data */
+ lsi_set_phase(s, PHASE_MI);
+ s->msg_action = 1;
+ lsi_queue_command(s);
+ } else {
+ /* wait command complete */
+ lsi_set_phase(s, PHASE_DI);
+ }
+ }
+}
+
+static void lsi_do_status(LSIState *s)
+{
+ uint8_t status;
+ DPRINTF("Get status len=%d status=%d\n", s->dbc, s->status);
+ if (s->dbc != 1)
+ BADF("Bad Status move\n");
+ s->dbc = 1;
+ status = s->status;
+ s->sfbr = status;
+ pci_dma_write(PCI_DEVICE(s), s->dnad, &status, 1);
+ lsi_set_phase(s, PHASE_MI);
+ s->msg_action = 1;
+ lsi_add_msg_byte(s, 0); /* COMMAND COMPLETE */
+}
+
+static void lsi_do_msgin(LSIState *s)
+{
+ int len;
+ DPRINTF("Message in len=%d/%d\n", s->dbc, s->msg_len);
+ s->sfbr = s->msg[0];
+ len = s->msg_len;
+ if (len > s->dbc)
+ len = s->dbc;
+ pci_dma_write(PCI_DEVICE(s), s->dnad, s->msg, len);
+ /* Linux drivers rely on the last byte being in the SIDL. */
+ s->sidl = s->msg[len - 1];
+ s->msg_len -= len;
+ if (s->msg_len) {
+ memmove(s->msg, s->msg + len, s->msg_len);
+ } else {
+ /* ??? Check if ATN (not yet implemented) is asserted and maybe
+ switch to PHASE_MO. */
+ switch (s->msg_action) {
+ case 0:
+ lsi_set_phase(s, PHASE_CMD);
+ break;
+ case 1:
+ lsi_disconnect(s);
+ break;
+ case 2:
+ lsi_set_phase(s, PHASE_DO);
+ break;
+ case 3:
+ lsi_set_phase(s, PHASE_DI);
+ break;
+ default:
+ abort();
+ }
+ }
+}
+
+/* Read the next byte during a MSGOUT phase. */
+static uint8_t lsi_get_msgbyte(LSIState *s)
+{
+ uint8_t data;
+ pci_dma_read(PCI_DEVICE(s), s->dnad, &data, 1);
+ s->dnad++;
+ s->dbc--;
+ return data;
+}
+
+/* Skip the next n bytes during a MSGOUT phase. */
+static void lsi_skip_msgbytes(LSIState *s, unsigned int n)
+{
+ s->dnad += n;
+ s->dbc -= n;
+}
+
+static void lsi_do_msgout(LSIState *s)
+{
+ uint8_t msg;
+ int len;
+ uint32_t current_tag;
+ lsi_request *current_req, *p, *p_next;
+
+ if (s->current) {
+ current_tag = s->current->tag;
+ current_req = s->current;
+ } else {
+ current_tag = s->select_tag;
+ current_req = lsi_find_by_tag(s, current_tag);
+ }
+
+ DPRINTF("MSG out len=%d\n", s->dbc);
+ while (s->dbc) {
+ msg = lsi_get_msgbyte(s);
+ s->sfbr = msg;
+
+ switch (msg) {
+ case 0x04:
+ DPRINTF("MSG: Disconnect\n");
+ lsi_disconnect(s);
+ break;
+ case 0x08:
+ DPRINTF("MSG: No Operation\n");
+ lsi_set_phase(s, PHASE_CMD);
+ break;
+ case 0x01:
+ len = lsi_get_msgbyte(s);
+ msg = lsi_get_msgbyte(s);
+ (void)len; /* avoid a warning about unused variable*/
+ DPRINTF("Extended message 0x%x (len %d)\n", msg, len);
+ switch (msg) {
+ case 1:
+ DPRINTF("SDTR (ignored)\n");
+ lsi_skip_msgbytes(s, 2);
+ break;
+ case 3:
+ DPRINTF("WDTR (ignored)\n");
+ lsi_skip_msgbytes(s, 1);
+ break;
+ default:
+ goto bad;
+ }
+ break;
+ case 0x20: /* SIMPLE queue */
+ s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
+ DPRINTF("SIMPLE queue tag=0x%x\n", s->select_tag & 0xff);
+ break;
+ case 0x21: /* HEAD of queue */
+ BADF("HEAD queue not implemented\n");
+ s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
+ break;
+ case 0x22: /* ORDERED queue */
+ BADF("ORDERED queue not implemented\n");
+ s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
+ break;
+ case 0x0d:
+ /* The ABORT TAG message clears the current I/O process only. */
+ DPRINTF("MSG: ABORT TAG tag=0x%x\n", current_tag);
+ if (current_req) {
+ scsi_req_cancel(current_req->req);
+ }
+ lsi_disconnect(s);
+ break;
+ case 0x06:
+ case 0x0e:
+ case 0x0c:
+ /* The ABORT message clears all I/O processes for the selecting
+ initiator on the specified logical unit of the target. */
+ if (msg == 0x06) {
+ DPRINTF("MSG: ABORT tag=0x%x\n", current_tag);
+ }
+ /* The CLEAR QUEUE message clears all I/O processes for all
+ initiators on the specified logical unit of the target. */
+ if (msg == 0x0e) {
+ DPRINTF("MSG: CLEAR QUEUE tag=0x%x\n", current_tag);
+ }
+ /* The BUS DEVICE RESET message clears all I/O processes for all
+ initiators on all logical units of the target. */
+ if (msg == 0x0c) {
+ DPRINTF("MSG: BUS DEVICE RESET tag=0x%x\n", current_tag);
+ }
+
+ /* clear the current I/O process */
+ if (s->current) {
+ scsi_req_cancel(s->current->req);
+ }
+
+ /* As the current implemented devices scsi_disk and scsi_generic
+ only support one LUN, we don't need to keep track of LUNs.
+ Clearing I/O processes for other initiators could be possible
+ for scsi_generic by sending a SG_SCSI_RESET to the /dev/sgX
+ device, but this is currently not implemented (and seems not
+ to be really necessary). So let's simply clear all queued
+ commands for the current device: */
+ QTAILQ_FOREACH_SAFE(p, &s->queue, next, p_next) {
+ if ((p->tag & 0x0000ff00) == (current_tag & 0x0000ff00)) {
+ scsi_req_cancel(p->req);
+ }
+ }
+
+ lsi_disconnect(s);
+ break;
+ default:
+ if ((msg & 0x80) == 0) {
+ goto bad;
+ }
+ s->current_lun = msg & 7;
+ DPRINTF("Select LUN %d\n", s->current_lun);
+ lsi_set_phase(s, PHASE_CMD);
+ break;
+ }
+ }
+ return;
+bad:
+ BADF("Unimplemented message 0x%02x\n", msg);
+ lsi_set_phase(s, PHASE_MI);
+ lsi_add_msg_byte(s, 7); /* MESSAGE REJECT */
+ s->msg_action = 0;
+}
+
+#define LSI_BUF_SIZE 4096
+static void lsi_memcpy(LSIState *s, uint32_t dest, uint32_t src, int count)
+{
+ PCIDevice *d = PCI_DEVICE(s);
+ int n;
+ uint8_t buf[LSI_BUF_SIZE];
+
+ DPRINTF("memcpy dest 0x%08x src 0x%08x count %d\n", dest, src, count);
+ while (count) {
+ n = (count > LSI_BUF_SIZE) ? LSI_BUF_SIZE : count;
+ pci_dma_read(d, src, buf, n);
+ pci_dma_write(d, dest, buf, n);
+ src += n;
+ dest += n;
+ count -= n;
+ }
+}
+
+static void lsi_wait_reselect(LSIState *s)
+{
+ lsi_request *p;
+
+ DPRINTF("Wait Reselect\n");
+
+ QTAILQ_FOREACH(p, &s->queue, next) {
+ if (p->pending) {
+ lsi_reselect(s, p);
+ break;
+ }
+ }
+ if (s->current == NULL) {
+ s->waiting = 1;
+ }
+}
+
+static void lsi_execute_script(LSIState *s)
+{
+ PCIDevice *pci_dev = PCI_DEVICE(s);
+ uint32_t insn;
+ uint32_t addr, addr_high;
+ int opcode;
+ int insn_processed = 0;
+
+ s->istat1 |= LSI_ISTAT1_SRUN;
+again:
+ insn_processed++;
+ insn = read_dword(s, s->dsp);
+ if (!insn) {
+ /* If we receive an empty opcode increment the DSP by 4 bytes
+ instead of 8 and execute the next opcode at that location */
+ s->dsp += 4;
+ goto again;
+ }
+ addr = read_dword(s, s->dsp + 4);
+ addr_high = 0;
+ DPRINTF("SCRIPTS dsp=%08x opcode %08x arg %08x\n", s->dsp, insn, addr);
+ s->dsps = addr;
+ s->dcmd = insn >> 24;
+ s->dsp += 8;
+ switch (insn >> 30) {
+ case 0: /* Block move. */
+ if (s->sist1 & LSI_SIST1_STO) {
+ DPRINTF("Delayed select timeout\n");
+ lsi_stop_script(s);
+ break;
+ }
+ s->dbc = insn & 0xffffff;
+ s->rbc = s->dbc;
+ /* ??? Set ESA. */
+ s->ia = s->dsp - 8;
+ if (insn & (1 << 29)) {
+ /* Indirect addressing. */
+ addr = read_dword(s, addr);
+ } else if (insn & (1 << 28)) {
+ uint32_t buf[2];
+ int32_t offset;
+ /* Table indirect addressing. */
+
+ /* 32-bit Table indirect */
+ offset = sextract32(addr, 0, 24);
+ pci_dma_read(pci_dev, s->dsa + offset, buf, 8);
+ /* byte count is stored in bits 0:23 only */
+ s->dbc = cpu_to_le32(buf[0]) & 0xffffff;
+ s->rbc = s->dbc;
+ addr = cpu_to_le32(buf[1]);
+
+ /* 40-bit DMA, upper addr bits [39:32] stored in first DWORD of
+ * table, bits [31:24] */
+ if (lsi_dma_40bit(s))
+ addr_high = cpu_to_le32(buf[0]) >> 24;
+ else if (lsi_dma_ti64bit(s)) {
+ int selector = (cpu_to_le32(buf[0]) >> 24) & 0x1f;
+ switch (selector) {
+ case 0 ... 0x0f:
+ /* offset index into scratch registers since
+ * TI64 mode can use registers C to R */
+ addr_high = s->scratch[2 + selector];
+ break;
+ case 0x10:
+ addr_high = s->mmrs;
+ break;
+ case 0x11:
+ addr_high = s->mmws;
+ break;
+ case 0x12:
+ addr_high = s->sfs;
+ break;
+ case 0x13:
+ addr_high = s->drs;
+ break;
+ case 0x14:
+ addr_high = s->sbms;
+ break;
+ case 0x15:
+ addr_high = s->dbms;
+ break;
+ default:
+ BADF("Illegal selector specified (0x%x > 0x15)"
+ " for 64-bit DMA block move", selector);
+ break;
+ }
+ }
+ } else if (lsi_dma_64bit(s)) {
+ /* fetch a 3rd dword if 64-bit direct move is enabled and
+ only if we're not doing table indirect or indirect addressing */
+ s->dbms = read_dword(s, s->dsp);
+ s->dsp += 4;
+ s->ia = s->dsp - 12;
+ }
+ if ((s->sstat1 & PHASE_MASK) != ((insn >> 24) & 7)) {
+ DPRINTF("Wrong phase got %d expected %d\n",
+ s->sstat1 & PHASE_MASK, (insn >> 24) & 7);
+ lsi_script_scsi_interrupt(s, LSI_SIST0_MA, 0);
+ break;
+ }
+ s->dnad = addr;
+ s->dnad64 = addr_high;
+ switch (s->sstat1 & 0x7) {
+ case PHASE_DO:
+ s->waiting = 2;
+ lsi_do_dma(s, 1);
+ if (s->waiting)
+ s->waiting = 3;
+ break;
+ case PHASE_DI:
+ s->waiting = 2;
+ lsi_do_dma(s, 0);
+ if (s->waiting)
+ s->waiting = 3;
+ break;
+ case PHASE_CMD:
+ lsi_do_command(s);
+ break;
+ case PHASE_ST:
+ lsi_do_status(s);
+ break;
+ case PHASE_MO:
+ lsi_do_msgout(s);
+ break;
+ case PHASE_MI:
+ lsi_do_msgin(s);
+ break;
+ default:
+ BADF("Unimplemented phase %d\n", s->sstat1 & PHASE_MASK);
+ exit(1);
+ }
+ s->dfifo = s->dbc & 0xff;
+ s->ctest5 = (s->ctest5 & 0xfc) | ((s->dbc >> 8) & 3);
+ s->sbc = s->dbc;
+ s->rbc -= s->dbc;
+ s->ua = addr + s->dbc;
+ break;
+
+ case 1: /* IO or Read/Write instruction. */
+ opcode = (insn >> 27) & 7;
+ if (opcode < 5) {
+ uint32_t id;
+
+ if (insn & (1 << 25)) {
+ id = read_dword(s, s->dsa + sextract32(insn, 0, 24));
+ } else {
+ id = insn;
+ }
+ id = (id >> 16) & 0xf;
+ if (insn & (1 << 26)) {
+ addr = s->dsp + sextract32(addr, 0, 24);
+ }
+ s->dnad = addr;
+ switch (opcode) {
+ case 0: /* Select */
+ s->sdid = id;
+ if (s->scntl1 & LSI_SCNTL1_CON) {
+ DPRINTF("Already reselected, jumping to alternative address\n");
+ s->dsp = s->dnad;
+ break;
+ }
+ s->sstat0 |= LSI_SSTAT0_WOA;
+ s->scntl1 &= ~LSI_SCNTL1_IARB;
+ if (!scsi_device_find(&s->bus, 0, id, 0)) {
+ lsi_bad_selection(s, id);
+ break;
+ }
+ DPRINTF("Selected target %d%s\n",
+ id, insn & (1 << 3) ? " ATN" : "");
+ /* ??? Linux drivers compain when this is set. Maybe
+ it only applies in low-level mode (unimplemented).
+ lsi_script_scsi_interrupt(s, LSI_SIST0_CMP, 0); */
+ s->select_tag = id << 8;
+ s->scntl1 |= LSI_SCNTL1_CON;
+ if (insn & (1 << 3)) {
+ s->socl |= LSI_SOCL_ATN;
+ }
+ lsi_set_phase(s, PHASE_MO);
+ break;
+ case 1: /* Disconnect */
+ DPRINTF("Wait Disconnect\n");
+ s->scntl1 &= ~LSI_SCNTL1_CON;
+ break;
+ case 2: /* Wait Reselect */
+ if (!lsi_irq_on_rsl(s)) {
+ lsi_wait_reselect(s);
+ }
+ break;
+ case 3: /* Set */
+ DPRINTF("Set%s%s%s%s\n",
+ insn & (1 << 3) ? " ATN" : "",
+ insn & (1 << 6) ? " ACK" : "",
+ insn & (1 << 9) ? " TM" : "",
+ insn & (1 << 10) ? " CC" : "");
+ if (insn & (1 << 3)) {
+ s->socl |= LSI_SOCL_ATN;
+ lsi_set_phase(s, PHASE_MO);
+ }
+ if (insn & (1 << 9)) {
+ BADF("Target mode not implemented\n");
+ exit(1);
+ }
+ if (insn & (1 << 10))
+ s->carry = 1;
+ break;
+ case 4: /* Clear */
+ DPRINTF("Clear%s%s%s%s\n",
+ insn & (1 << 3) ? " ATN" : "",
+ insn & (1 << 6) ? " ACK" : "",
+ insn & (1 << 9) ? " TM" : "",
+ insn & (1 << 10) ? " CC" : "");
+ if (insn & (1 << 3)) {
+ s->socl &= ~LSI_SOCL_ATN;
+ }
+ if (insn & (1 << 10))
+ s->carry = 0;
+ break;
+ }
+ } else {
+ uint8_t op0;
+ uint8_t op1;
+ uint8_t data8;
+ int reg;
+ int operator;
+#ifdef DEBUG_LSI
+ static const char *opcode_names[3] =
+ {"Write", "Read", "Read-Modify-Write"};
+ static const char *operator_names[8] =
+ {"MOV", "SHL", "OR", "XOR", "AND", "SHR", "ADD", "ADC"};
+#endif
+
+ reg = ((insn >> 16) & 0x7f) | (insn & 0x80);
+ data8 = (insn >> 8) & 0xff;
+ opcode = (insn >> 27) & 7;
+ operator = (insn >> 24) & 7;
+ DPRINTF("%s reg 0x%x %s data8=0x%02x sfbr=0x%02x%s\n",
+ opcode_names[opcode - 5], reg,
+ operator_names[operator], data8, s->sfbr,
+ (insn & (1 << 23)) ? " SFBR" : "");
+ op0 = op1 = 0;
+ switch (opcode) {
+ case 5: /* From SFBR */
+ op0 = s->sfbr;
+ op1 = data8;
+ break;
+ case 6: /* To SFBR */
+ if (operator)
+ op0 = lsi_reg_readb(s, reg);
+ op1 = data8;
+ break;
+ case 7: /* Read-modify-write */
+ if (operator)
+ op0 = lsi_reg_readb(s, reg);
+ if (insn & (1 << 23)) {
+ op1 = s->sfbr;
+ } else {
+ op1 = data8;
+ }
+ break;
+ }
+
+ switch (operator) {
+ case 0: /* move */
+ op0 = op1;
+ break;
+ case 1: /* Shift left */
+ op1 = op0 >> 7;
+ op0 = (op0 << 1) | s->carry;
+ s->carry = op1;
+ break;
+ case 2: /* OR */
+ op0 |= op1;
+ break;
+ case 3: /* XOR */
+ op0 ^= op1;
+ break;
+ case 4: /* AND */
+ op0 &= op1;
+ break;
+ case 5: /* SHR */
+ op1 = op0 & 1;
+ op0 = (op0 >> 1) | (s->carry << 7);
+ s->carry = op1;
+ break;
+ case 6: /* ADD */
+ op0 += op1;
+ s->carry = op0 < op1;
+ break;
+ case 7: /* ADC */
+ op0 += op1 + s->carry;
+ if (s->carry)
+ s->carry = op0 <= op1;
+ else
+ s->carry = op0 < op1;
+ break;
+ }
+
+ switch (opcode) {
+ case 5: /* From SFBR */
+ case 7: /* Read-modify-write */
+ lsi_reg_writeb(s, reg, op0);
+ break;
+ case 6: /* To SFBR */
+ s->sfbr = op0;
+ break;
+ }
+ }
+ break;
+
+ case 2: /* Transfer Control. */
+ {
+ int cond;
+ int jmp;
+
+ if ((insn & 0x002e0000) == 0) {
+ DPRINTF("NOP\n");
+ break;
+ }
+ if (s->sist1 & LSI_SIST1_STO) {
+ DPRINTF("Delayed select timeout\n");
+ lsi_stop_script(s);
+ break;
+ }
+ cond = jmp = (insn & (1 << 19)) != 0;
+ if (cond == jmp && (insn & (1 << 21))) {
+ DPRINTF("Compare carry %d\n", s->carry == jmp);
+ cond = s->carry != 0;
+ }
+ if (cond == jmp && (insn & (1 << 17))) {
+ DPRINTF("Compare phase %d %c= %d\n",
+ (s->sstat1 & PHASE_MASK),
+ jmp ? '=' : '!',
+ ((insn >> 24) & 7));
+ cond = (s->sstat1 & PHASE_MASK) == ((insn >> 24) & 7);
+ }
+ if (cond == jmp && (insn & (1 << 18))) {
+ uint8_t mask;
+
+ mask = (~insn >> 8) & 0xff;
+ DPRINTF("Compare data 0x%x & 0x%x %c= 0x%x\n",
+ s->sfbr, mask, jmp ? '=' : '!', insn & mask);
+ cond = (s->sfbr & mask) == (insn & mask);
+ }
+ if (cond == jmp) {
+ if (insn & (1 << 23)) {
+ /* Relative address. */
+ addr = s->dsp + sextract32(addr, 0, 24);
+ }
+ switch ((insn >> 27) & 7) {
+ case 0: /* Jump */
+ DPRINTF("Jump to 0x%08x\n", addr);
+ s->adder = addr;
+ s->dsp = addr;
+ break;
+ case 1: /* Call */
+ DPRINTF("Call 0x%08x\n", addr);
+ s->temp = s->dsp;
+ s->dsp = addr;
+ break;
+ case 2: /* Return */
+ DPRINTF("Return to 0x%08x\n", s->temp);
+ s->dsp = s->temp;
+ break;
+ case 3: /* Interrupt */
+ DPRINTF("Interrupt 0x%08x\n", s->dsps);
+ if ((insn & (1 << 20)) != 0) {
+ s->istat0 |= LSI_ISTAT0_INTF;
+ lsi_update_irq(s);
+ } else {
+ lsi_script_dma_interrupt(s, LSI_DSTAT_SIR);
+ }
+ break;
+ default:
+ DPRINTF("Illegal transfer control\n");
+ lsi_script_dma_interrupt(s, LSI_DSTAT_IID);
+ break;
+ }
+ } else {
+ DPRINTF("Control condition failed\n");
+ }
+ }
+ break;
+
+ case 3:
+ if ((insn & (1 << 29)) == 0) {
+ /* Memory move. */
+ uint32_t dest;
+ /* ??? The docs imply the destination address is loaded into
+ the TEMP register. However the Linux drivers rely on
+ the value being presrved. */
+ dest = read_dword(s, s->dsp);
+ s->dsp += 4;
+ lsi_memcpy(s, dest, addr, insn & 0xffffff);
+ } else {
+ uint8_t data[7];
+ int reg;
+ int n;
+ int i;
+
+ if (insn & (1 << 28)) {
+ addr = s->dsa + sextract32(addr, 0, 24);
+ }
+ n = (insn & 7);
+ reg = (insn >> 16) & 0xff;
+ if (insn & (1 << 24)) {
+ pci_dma_read(pci_dev, addr, data, n);
+ DPRINTF("Load reg 0x%x size %d addr 0x%08x = %08x\n", reg, n,
+ addr, *(int *)data);
+ for (i = 0; i < n; i++) {
+ lsi_reg_writeb(s, reg + i, data[i]);
+ }
+ } else {
+ DPRINTF("Store reg 0x%x size %d addr 0x%08x\n", reg, n, addr);
+ for (i = 0; i < n; i++) {
+ data[i] = lsi_reg_readb(s, reg + i);
+ }
+ pci_dma_write(pci_dev, addr, data, n);
+ }
+ }
+ }
+ if (insn_processed > 10000 && !s->waiting) {
+ /* Some windows drivers make the device spin waiting for a memory
+ location to change. If we have been executed a lot of code then
+ assume this is the case and force an unexpected device disconnect.
+ This is apparently sufficient to beat the drivers into submission.
+ */
+ if (!(s->sien0 & LSI_SIST0_UDC))
+ fprintf(stderr, "inf. loop with UDC masked\n");
+ lsi_script_scsi_interrupt(s, LSI_SIST0_UDC, 0);
+ lsi_disconnect(s);
+ } else if (s->istat1 & LSI_ISTAT1_SRUN && !s->waiting) {
+ if (s->dcntl & LSI_DCNTL_SSM) {
+ lsi_script_dma_interrupt(s, LSI_DSTAT_SSI);
+ } else {
+ goto again;
+ }
+ }
+ DPRINTF("SCRIPTS execution stopped\n");
+}
+
+static uint8_t lsi_reg_readb(LSIState *s, int offset)
+{
+ uint8_t tmp;
+#define CASE_GET_REG24(name, addr) \
+ case addr: return s->name & 0xff; \
+ case addr + 1: return (s->name >> 8) & 0xff; \
+ case addr + 2: return (s->name >> 16) & 0xff;
+
+#define CASE_GET_REG32(name, addr) \
+ case addr: return s->name & 0xff; \
+ case addr + 1: return (s->name >> 8) & 0xff; \
+ case addr + 2: return (s->name >> 16) & 0xff; \
+ case addr + 3: return (s->name >> 24) & 0xff;
+
+#ifdef DEBUG_LSI_REG
+ DPRINTF("Read reg %x\n", offset);
+#endif
+ switch (offset) {
+ case 0x00: /* SCNTL0 */
+ return s->scntl0;
+ case 0x01: /* SCNTL1 */
+ return s->scntl1;
+ case 0x02: /* SCNTL2 */
+ return s->scntl2;
+ case 0x03: /* SCNTL3 */
+ return s->scntl3;
+ case 0x04: /* SCID */
+ return s->scid;
+ case 0x05: /* SXFER */
+ return s->sxfer;
+ case 0x06: /* SDID */
+ return s->sdid;
+ case 0x07: /* GPREG0 */
+ return 0x7f;
+ case 0x08: /* Revision ID */
+ return 0x00;
+ case 0x09: /* SOCL */
+ return s->socl;
+ case 0xa: /* SSID */
+ return s->ssid;
+ case 0xb: /* SBCL */
+ /* ??? This is not correct. However it's (hopefully) only
+ used for diagnostics, so should be ok. */
+ return 0;
+ case 0xc: /* DSTAT */
+ tmp = s->dstat | LSI_DSTAT_DFE;
+ if ((s->istat0 & LSI_ISTAT0_INTF) == 0)
+ s->dstat = 0;
+ lsi_update_irq(s);
+ return tmp;
+ case 0x0d: /* SSTAT0 */
+ return s->sstat0;
+ case 0x0e: /* SSTAT1 */
+ return s->sstat1;
+ case 0x0f: /* SSTAT2 */
+ return s->scntl1 & LSI_SCNTL1_CON ? 0 : 2;
+ CASE_GET_REG32(dsa, 0x10)
+ case 0x14: /* ISTAT0 */
+ return s->istat0;
+ case 0x15: /* ISTAT1 */
+ return s->istat1;
+ case 0x16: /* MBOX0 */
+ return s->mbox0;
+ case 0x17: /* MBOX1 */
+ return s->mbox1;
+ case 0x18: /* CTEST0 */
+ return 0xff;
+ case 0x19: /* CTEST1 */
+ return 0;
+ case 0x1a: /* CTEST2 */
+ tmp = s->ctest2 | LSI_CTEST2_DACK | LSI_CTEST2_CM;
+ if (s->istat0 & LSI_ISTAT0_SIGP) {
+ s->istat0 &= ~LSI_ISTAT0_SIGP;
+ tmp |= LSI_CTEST2_SIGP;
+ }
+ return tmp;
+ case 0x1b: /* CTEST3 */
+ return s->ctest3;
+ CASE_GET_REG32(temp, 0x1c)
+ case 0x20: /* DFIFO */
+ return 0;
+ case 0x21: /* CTEST4 */
+ return s->ctest4;
+ case 0x22: /* CTEST5 */
+ return s->ctest5;
+ case 0x23: /* CTEST6 */
+ return 0;
+ CASE_GET_REG24(dbc, 0x24)
+ case 0x27: /* DCMD */
+ return s->dcmd;
+ CASE_GET_REG32(dnad, 0x28)
+ CASE_GET_REG32(dsp, 0x2c)
+ CASE_GET_REG32(dsps, 0x30)
+ CASE_GET_REG32(scratch[0], 0x34)
+ case 0x38: /* DMODE */
+ return s->dmode;
+ case 0x39: /* DIEN */
+ return s->dien;
+ case 0x3a: /* SBR */
+ return s->sbr;
+ case 0x3b: /* DCNTL */
+ return s->dcntl;
+ /* ADDER Output (Debug of relative jump address) */
+ CASE_GET_REG32(adder, 0x3c)
+ case 0x40: /* SIEN0 */
+ return s->sien0;
+ case 0x41: /* SIEN1 */
+ return s->sien1;
+ case 0x42: /* SIST0 */
+ tmp = s->sist0;
+ s->sist0 = 0;
+ lsi_update_irq(s);
+ return tmp;
+ case 0x43: /* SIST1 */
+ tmp = s->sist1;
+ s->sist1 = 0;
+ lsi_update_irq(s);
+ return tmp;
+ case 0x46: /* MACNTL */
+ return 0x0f;
+ case 0x47: /* GPCNTL0 */
+ return 0x0f;
+ case 0x48: /* STIME0 */
+ return s->stime0;
+ case 0x4a: /* RESPID0 */
+ return s->respid0;
+ case 0x4b: /* RESPID1 */
+ return s->respid1;
+ case 0x4d: /* STEST1 */
+ return s->stest1;
+ case 0x4e: /* STEST2 */
+ return s->stest2;
+ case 0x4f: /* STEST3 */
+ return s->stest3;
+ case 0x50: /* SIDL */
+ /* This is needed by the linux drivers. We currently only update it
+ during the MSG IN phase. */
+ return s->sidl;
+ case 0x52: /* STEST4 */
+ return 0xe0;
+ case 0x56: /* CCNTL0 */
+ return s->ccntl0;
+ case 0x57: /* CCNTL1 */
+ return s->ccntl1;
+ case 0x58: /* SBDL */
+ /* Some drivers peek at the data bus during the MSG IN phase. */
+ if ((s->sstat1 & PHASE_MASK) == PHASE_MI)
+ return s->msg[0];
+ return 0;
+ case 0x59: /* SBDL high */
+ return 0;
+ CASE_GET_REG32(mmrs, 0xa0)
+ CASE_GET_REG32(mmws, 0xa4)
+ CASE_GET_REG32(sfs, 0xa8)
+ CASE_GET_REG32(drs, 0xac)
+ CASE_GET_REG32(sbms, 0xb0)
+ CASE_GET_REG32(dbms, 0xb4)
+ CASE_GET_REG32(dnad64, 0xb8)
+ CASE_GET_REG32(pmjad1, 0xc0)
+ CASE_GET_REG32(pmjad2, 0xc4)
+ CASE_GET_REG32(rbc, 0xc8)
+ CASE_GET_REG32(ua, 0xcc)
+ CASE_GET_REG32(ia, 0xd4)
+ CASE_GET_REG32(sbc, 0xd8)
+ CASE_GET_REG32(csbc, 0xdc)
+ }
+ if (offset >= 0x5c && offset < 0xa0) {
+ int n;
+ int shift;
+ n = (offset - 0x58) >> 2;
+ shift = (offset & 3) * 8;
+ return (s->scratch[n] >> shift) & 0xff;
+ }
+ BADF("readb 0x%x\n", offset);
+ exit(1);
+#undef CASE_GET_REG24
+#undef CASE_GET_REG32
+}
+
+static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
+{
+#define CASE_SET_REG24(name, addr) \
+ case addr : s->name &= 0xffffff00; s->name |= val; break; \
+ case addr + 1: s->name &= 0xffff00ff; s->name |= val << 8; break; \
+ case addr + 2: s->name &= 0xff00ffff; s->name |= val << 16; break;
+
+#define CASE_SET_REG32(name, addr) \
+ case addr : s->name &= 0xffffff00; s->name |= val; break; \
+ case addr + 1: s->name &= 0xffff00ff; s->name |= val << 8; break; \
+ case addr + 2: s->name &= 0xff00ffff; s->name |= val << 16; break; \
+ case addr + 3: s->name &= 0x00ffffff; s->name |= val << 24; break;
+
+#ifdef DEBUG_LSI_REG
+ DPRINTF("Write reg %x = %02x\n", offset, val);
+#endif
+ switch (offset) {
+ case 0x00: /* SCNTL0 */
+ s->scntl0 = val;
+ if (val & LSI_SCNTL0_START) {
+ BADF("Start sequence not implemented\n");
+ }
+ break;
+ case 0x01: /* SCNTL1 */
+ s->scntl1 = val & ~LSI_SCNTL1_SST;
+ if (val & LSI_SCNTL1_IARB) {
+ BADF("Immediate Arbritration not implemented\n");
+ }
+ if (val & LSI_SCNTL1_RST) {
+ if (!(s->sstat0 & LSI_SSTAT0_RST)) {
+ qbus_reset_all(&s->bus.qbus);
+ s->sstat0 |= LSI_SSTAT0_RST;
+ lsi_script_scsi_interrupt(s, LSI_SIST0_RST, 0);
+ }
+ } else {
+ s->sstat0 &= ~LSI_SSTAT0_RST;
+ }
+ break;
+ case 0x02: /* SCNTL2 */
+ val &= ~(LSI_SCNTL2_WSR | LSI_SCNTL2_WSS);
+ s->scntl2 = val;
+ break;
+ case 0x03: /* SCNTL3 */
+ s->scntl3 = val;
+ break;
+ case 0x04: /* SCID */
+ s->scid = val;
+ break;
+ case 0x05: /* SXFER */
+ s->sxfer = val;
+ break;
+ case 0x06: /* SDID */
+ if ((s->ssid & 0x80) && (val & 0xf) != (s->ssid & 0xf)) {
+ BADF("Destination ID does not match SSID\n");
+ }
+ s->sdid = val & 0xf;
+ break;
+ case 0x07: /* GPREG0 */
+ break;
+ case 0x08: /* SFBR */
+ /* The CPU is not allowed to write to this register. However the
+ SCRIPTS register move instructions are. */
+ s->sfbr = val;
+ break;
+ case 0x0a: case 0x0b:
+ /* Openserver writes to these readonly registers on startup */
+ return;
+ case 0x0c: case 0x0d: case 0x0e: case 0x0f:
+ /* Linux writes to these readonly registers on startup. */
+ return;
+ CASE_SET_REG32(dsa, 0x10)
+ case 0x14: /* ISTAT0 */
+ s->istat0 = (s->istat0 & 0x0f) | (val & 0xf0);
+ if (val & LSI_ISTAT0_ABRT) {
+ lsi_script_dma_interrupt(s, LSI_DSTAT_ABRT);
+ }
+ if (val & LSI_ISTAT0_INTF) {
+ s->istat0 &= ~LSI_ISTAT0_INTF;
+ lsi_update_irq(s);
+ }
+ if (s->waiting == 1 && val & LSI_ISTAT0_SIGP) {
+ DPRINTF("Woken by SIGP\n");
+ s->waiting = 0;
+ s->dsp = s->dnad;
+ lsi_execute_script(s);
+ }
+ if (val & LSI_ISTAT0_SRST) {
+ qdev_reset_all(DEVICE(s));
+ }
+ break;
+ case 0x16: /* MBOX0 */
+ s->mbox0 = val;
+ break;
+ case 0x17: /* MBOX1 */
+ s->mbox1 = val;
+ break;
+ case 0x18: /* CTEST0 */
+ /* nothing to do */
+ break;
+ case 0x1a: /* CTEST2 */
+ s->ctest2 = val & LSI_CTEST2_PCICIE;
+ break;
+ case 0x1b: /* CTEST3 */
+ s->ctest3 = val & 0x0f;
+ break;
+ CASE_SET_REG32(temp, 0x1c)
+ case 0x21: /* CTEST4 */
+ if (val & 7) {
+ BADF("Unimplemented CTEST4-FBL 0x%x\n", val);
+ }
+ s->ctest4 = val;
+ break;
+ case 0x22: /* CTEST5 */
+ if (val & (LSI_CTEST5_ADCK | LSI_CTEST5_BBCK)) {
+ BADF("CTEST5 DMA increment not implemented\n");
+ }
+ s->ctest5 = val;
+ break;
+ CASE_SET_REG24(dbc, 0x24)
+ CASE_SET_REG32(dnad, 0x28)
+ case 0x2c: /* DSP[0:7] */
+ s->dsp &= 0xffffff00;
+ s->dsp |= val;
+ break;
+ case 0x2d: /* DSP[8:15] */
+ s->dsp &= 0xffff00ff;
+ s->dsp |= val << 8;
+ break;
+ case 0x2e: /* DSP[16:23] */
+ s->dsp &= 0xff00ffff;
+ s->dsp |= val << 16;
+ break;
+ case 0x2f: /* DSP[24:31] */
+ s->dsp &= 0x00ffffff;
+ s->dsp |= val << 24;
+ if ((s->dmode & LSI_DMODE_MAN) == 0
+ && (s->istat1 & LSI_ISTAT1_SRUN) == 0)
+ lsi_execute_script(s);
+ break;
+ CASE_SET_REG32(dsps, 0x30)
+ CASE_SET_REG32(scratch[0], 0x34)
+ case 0x38: /* DMODE */
+ if (val & (LSI_DMODE_SIOM | LSI_DMODE_DIOM)) {
+ BADF("IO mappings not implemented\n");
+ }
+ s->dmode = val;
+ break;
+ case 0x39: /* DIEN */
+ s->dien = val;
+ lsi_update_irq(s);
+ break;
+ case 0x3a: /* SBR */
+ s->sbr = val;
+ break;
+ case 0x3b: /* DCNTL */
+ s->dcntl = val & ~(LSI_DCNTL_PFF | LSI_DCNTL_STD);
+ if ((val & LSI_DCNTL_STD) && (s->istat1 & LSI_ISTAT1_SRUN) == 0)
+ lsi_execute_script(s);
+ break;
+ case 0x40: /* SIEN0 */
+ s->sien0 = val;
+ lsi_update_irq(s);
+ break;
+ case 0x41: /* SIEN1 */
+ s->sien1 = val;
+ lsi_update_irq(s);
+ break;
+ case 0x47: /* GPCNTL0 */
+ break;
+ case 0x48: /* STIME0 */
+ s->stime0 = val;
+ break;
+ case 0x49: /* STIME1 */
+ if (val & 0xf) {
+ DPRINTF("General purpose timer not implemented\n");
+ /* ??? Raising the interrupt immediately seems to be sufficient
+ to keep the FreeBSD driver happy. */
+ lsi_script_scsi_interrupt(s, 0, LSI_SIST1_GEN);
+ }
+ break;
+ case 0x4a: /* RESPID0 */
+ s->respid0 = val;
+ break;
+ case 0x4b: /* RESPID1 */
+ s->respid1 = val;
+ break;
+ case 0x4d: /* STEST1 */
+ s->stest1 = val;
+ break;
+ case 0x4e: /* STEST2 */
+ if (val & 1) {
+ BADF("Low level mode not implemented\n");
+ }
+ s->stest2 = val;
+ break;
+ case 0x4f: /* STEST3 */
+ if (val & 0x41) {
+ BADF("SCSI FIFO test mode not implemented\n");
+ }
+ s->stest3 = val;
+ break;
+ case 0x56: /* CCNTL0 */
+ s->ccntl0 = val;
+ break;
+ case 0x57: /* CCNTL1 */
+ s->ccntl1 = val;
+ break;
+ CASE_SET_REG32(mmrs, 0xa0)
+ CASE_SET_REG32(mmws, 0xa4)
+ CASE_SET_REG32(sfs, 0xa8)
+ CASE_SET_REG32(drs, 0xac)
+ CASE_SET_REG32(sbms, 0xb0)
+ CASE_SET_REG32(dbms, 0xb4)
+ CASE_SET_REG32(dnad64, 0xb8)
+ CASE_SET_REG32(pmjad1, 0xc0)
+ CASE_SET_REG32(pmjad2, 0xc4)
+ CASE_SET_REG32(rbc, 0xc8)
+ CASE_SET_REG32(ua, 0xcc)
+ CASE_SET_REG32(ia, 0xd4)
+ CASE_SET_REG32(sbc, 0xd8)
+ CASE_SET_REG32(csbc, 0xdc)
+ default:
+ if (offset >= 0x5c && offset < 0xa0) {
+ int n;
+ int shift;
+ n = (offset - 0x58) >> 2;
+ shift = (offset & 3) * 8;
+ s->scratch[n] = deposit32(s->scratch[n], shift, 8, val);
+ } else {
+ BADF("Unhandled writeb 0x%x = 0x%x\n", offset, val);
+ }
+ }
+#undef CASE_SET_REG24
+#undef CASE_SET_REG32
+}
+
+static void lsi_mmio_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ LSIState *s = opaque;
+
+ lsi_reg_writeb(s, addr & 0xff, val);
+}
+
+static uint64_t lsi_mmio_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ LSIState *s = opaque;
+
+ return lsi_reg_readb(s, addr & 0xff);
+}
+
+static const MemoryRegionOps lsi_mmio_ops = {
+ .read = lsi_mmio_read,
+ .write = lsi_mmio_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+};
+
+static void lsi_ram_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ LSIState *s = opaque;
+ uint32_t newval;
+ uint32_t mask;
+ int shift;
+
+ newval = s->script_ram[addr >> 2];
+ shift = (addr & 3) * 8;
+ mask = ((uint64_t)1 << (size * 8)) - 1;
+ newval &= ~(mask << shift);
+ newval |= val << shift;
+ s->script_ram[addr >> 2] = newval;
+}
+
+static uint64_t lsi_ram_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ LSIState *s = opaque;
+ uint32_t val;
+ uint32_t mask;
+
+ val = s->script_ram[addr >> 2];
+ mask = ((uint64_t)1 << (size * 8)) - 1;
+ val >>= (addr & 3) * 8;
+ return val & mask;
+}
+
+static const MemoryRegionOps lsi_ram_ops = {
+ .read = lsi_ram_read,
+ .write = lsi_ram_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static uint64_t lsi_io_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ LSIState *s = opaque;
+ return lsi_reg_readb(s, addr & 0xff);
+}
+
+static void lsi_io_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ LSIState *s = opaque;
+ lsi_reg_writeb(s, addr & 0xff, val);
+}
+
+static const MemoryRegionOps lsi_io_ops = {
+ .read = lsi_io_read,
+ .write = lsi_io_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+};
+
+static void lsi_scsi_reset(DeviceState *dev)
+{
+ LSIState *s = LSI53C895A(dev);
+
+ lsi_soft_reset(s);
+}
+
+static void lsi_pre_save(void *opaque)
+{
+ LSIState *s = opaque;
+
+ if (s->current) {
+ assert(s->current->dma_buf == NULL);
+ assert(s->current->dma_len == 0);
+ }
+ assert(QTAILQ_EMPTY(&s->queue));
+}
+
+static const VMStateDescription vmstate_lsi_scsi = {
+ .name = "lsiscsi",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .pre_save = lsi_pre_save,
+ .fields = (VMStateField[]) {
+ VMSTATE_PCI_DEVICE(parent_obj, LSIState),
+
+ VMSTATE_INT32(carry, LSIState),
+ VMSTATE_INT32(status, LSIState),
+ VMSTATE_INT32(msg_action, LSIState),
+ VMSTATE_INT32(msg_len, LSIState),
+ VMSTATE_BUFFER(msg, LSIState),
+ VMSTATE_INT32(waiting, LSIState),
+
+ VMSTATE_UINT32(dsa, LSIState),
+ VMSTATE_UINT32(temp, LSIState),
+ VMSTATE_UINT32(dnad, LSIState),
+ VMSTATE_UINT32(dbc, LSIState),
+ VMSTATE_UINT8(istat0, LSIState),
+ VMSTATE_UINT8(istat1, LSIState),
+ VMSTATE_UINT8(dcmd, LSIState),
+ VMSTATE_UINT8(dstat, LSIState),
+ VMSTATE_UINT8(dien, LSIState),
+ VMSTATE_UINT8(sist0, LSIState),
+ VMSTATE_UINT8(sist1, LSIState),
+ VMSTATE_UINT8(sien0, LSIState),
+ VMSTATE_UINT8(sien1, LSIState),
+ VMSTATE_UINT8(mbox0, LSIState),
+ VMSTATE_UINT8(mbox1, LSIState),
+ VMSTATE_UINT8(dfifo, LSIState),
+ VMSTATE_UINT8(ctest2, LSIState),
+ VMSTATE_UINT8(ctest3, LSIState),
+ VMSTATE_UINT8(ctest4, LSIState),
+ VMSTATE_UINT8(ctest5, LSIState),
+ VMSTATE_UINT8(ccntl0, LSIState),
+ VMSTATE_UINT8(ccntl1, LSIState),
+ VMSTATE_UINT32(dsp, LSIState),
+ VMSTATE_UINT32(dsps, LSIState),
+ VMSTATE_UINT8(dmode, LSIState),
+ VMSTATE_UINT8(dcntl, LSIState),
+ VMSTATE_UINT8(scntl0, LSIState),
+ VMSTATE_UINT8(scntl1, LSIState),
+ VMSTATE_UINT8(scntl2, LSIState),
+ VMSTATE_UINT8(scntl3, LSIState),
+ VMSTATE_UINT8(sstat0, LSIState),
+ VMSTATE_UINT8(sstat1, LSIState),
+ VMSTATE_UINT8(scid, LSIState),
+ VMSTATE_UINT8(sxfer, LSIState),
+ VMSTATE_UINT8(socl, LSIState),
+ VMSTATE_UINT8(sdid, LSIState),
+ VMSTATE_UINT8(ssid, LSIState),
+ VMSTATE_UINT8(sfbr, LSIState),
+ VMSTATE_UINT8(stest1, LSIState),
+ VMSTATE_UINT8(stest2, LSIState),
+ VMSTATE_UINT8(stest3, LSIState),
+ VMSTATE_UINT8(sidl, LSIState),
+ VMSTATE_UINT8(stime0, LSIState),
+ VMSTATE_UINT8(respid0, LSIState),
+ VMSTATE_UINT8(respid1, LSIState),
+ VMSTATE_UINT32(mmrs, LSIState),
+ VMSTATE_UINT32(mmws, LSIState),
+ VMSTATE_UINT32(sfs, LSIState),
+ VMSTATE_UINT32(drs, LSIState),
+ VMSTATE_UINT32(sbms, LSIState),
+ VMSTATE_UINT32(dbms, LSIState),
+ VMSTATE_UINT32(dnad64, LSIState),
+ VMSTATE_UINT32(pmjad1, LSIState),
+ VMSTATE_UINT32(pmjad2, LSIState),
+ VMSTATE_UINT32(rbc, LSIState),
+ VMSTATE_UINT32(ua, LSIState),
+ VMSTATE_UINT32(ia, LSIState),
+ VMSTATE_UINT32(sbc, LSIState),
+ VMSTATE_UINT32(csbc, LSIState),
+ VMSTATE_BUFFER_UNSAFE(scratch, LSIState, 0, 18 * sizeof(uint32_t)),
+ VMSTATE_UINT8(sbr, LSIState),
+
+ VMSTATE_BUFFER_UNSAFE(script_ram, LSIState, 0, 2048 * sizeof(uint32_t)),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const struct SCSIBusInfo lsi_scsi_info = {
+ .tcq = true,
+ .max_target = LSI_MAX_DEVS,
+ .max_lun = 0, /* LUN support is buggy */
+
+ .transfer_data = lsi_transfer_data,
+ .complete = lsi_command_complete,
+ .cancel = lsi_request_cancelled
+};
+
+static void lsi_scsi_realize(PCIDevice *dev, Error **errp)
+{
+ LSIState *s = LSI53C895A(dev);
+ DeviceState *d = DEVICE(dev);
+ uint8_t *pci_conf;
+
+ pci_conf = dev->config;
+
+ /* PCI latency timer = 255 */
+ pci_conf[PCI_LATENCY_TIMER] = 0xff;
+ /* Interrupt pin A */
+ pci_conf[PCI_INTERRUPT_PIN] = 0x01;
+
+ memory_region_init_io(&s->mmio_io, OBJECT(s), &lsi_mmio_ops, s,
+ "lsi-mmio", 0x400);
+ memory_region_init_io(&s->ram_io, OBJECT(s), &lsi_ram_ops, s,
+ "lsi-ram", 0x2000);
+ memory_region_init_io(&s->io_io, OBJECT(s), &lsi_io_ops, s,
+ "lsi-io", 256);
+
+ pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->io_io);
+ pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mmio_io);
+ pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->ram_io);
+ QTAILQ_INIT(&s->queue);
+
+ scsi_bus_new(&s->bus, sizeof(s->bus), d, &lsi_scsi_info, NULL);
+ if (!d->hotplugged) {
+ scsi_bus_legacy_handle_cmdline(&s->bus, errp);
+ }
+}
+
+static void lsi_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->realize = lsi_scsi_realize;
+ k->vendor_id = PCI_VENDOR_ID_LSI_LOGIC;
+ k->device_id = PCI_DEVICE_ID_LSI_53C895A;
+ k->class_id = PCI_CLASS_STORAGE_SCSI;
+ k->subsystem_id = 0x1000;
+ dc->reset = lsi_scsi_reset;
+ dc->vmsd = &vmstate_lsi_scsi;
+ set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
+}
+
+static const TypeInfo lsi_info = {
+ .name = TYPE_LSI53C895A,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(LSIState),
+ .class_init = lsi_class_init,
+};
+
+static void lsi53c810_class_init(ObjectClass *klass, void *data)
+{
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->device_id = PCI_DEVICE_ID_LSI_53C810;
+}
+
+static TypeInfo lsi53c810_info = {
+ .name = TYPE_LSI53C810,
+ .parent = TYPE_LSI53C895A,
+ .class_init = lsi53c810_class_init,
+};
+
+static void lsi53c895a_register_types(void)
+{
+ type_register_static(&lsi_info);
+ type_register_static(&lsi53c810_info);
+}
+
+type_init(lsi53c895a_register_types)