From e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb Mon Sep 17 00:00:00 2001 From: Yang Zhang Date: Fri, 28 Aug 2015 09:58:54 +0800 Subject: Add qemu 2.4.0 Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5 Signed-off-by: Yang Zhang --- qemu/hw/scsi/lsi53c895a.c | 2163 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2163 insertions(+) create mode 100644 qemu/hw/scsi/lsi53c895a.c (limited to 'qemu/hw/scsi/lsi53c895a.c') diff --git a/qemu/hw/scsi/lsi53c895a.c b/qemu/hw/scsi/lsi53c895a.c new file mode 100644 index 000000000..c5b0cc5ca --- /dev/null +++ b/qemu/hw/scsi/lsi53c895a.c @@ -0,0 +1,2163 @@ +/* + * QEMU LSI53C895A SCSI Host Bus Adapter emulation + * + * Copyright (c) 2006 CodeSourcery. + * Written by Paul Brook + * + * This code is licensed under the LGPL. + */ + +/* Note: + * LSI53C810 emulation is incorrect, in the sense that it supports + * features added in later evolutions. This should not be a problem, + * as well-behaved operating systems will not try to use them. + */ + +#include + +#include "hw/hw.h" +#include "hw/pci/pci.h" +#include "hw/scsi/scsi.h" +#include "sysemu/dma.h" + +//#define DEBUG_LSI +//#define DEBUG_LSI_REG + +#ifdef DEBUG_LSI +#define DPRINTF(fmt, ...) \ +do { printf("lsi_scsi: " fmt , ## __VA_ARGS__); } while (0) +#define BADF(fmt, ...) \ +do { fprintf(stderr, "lsi_scsi: error: " fmt , ## __VA_ARGS__); exit(1);} while (0) +#else +#define DPRINTF(fmt, ...) do {} while(0) +#define BADF(fmt, ...) \ +do { fprintf(stderr, "lsi_scsi: error: " fmt , ## __VA_ARGS__);} while (0) +#endif + +#define LSI_MAX_DEVS 7 + +#define LSI_SCNTL0_TRG 0x01 +#define LSI_SCNTL0_AAP 0x02 +#define LSI_SCNTL0_EPC 0x08 +#define LSI_SCNTL0_WATN 0x10 +#define LSI_SCNTL0_START 0x20 + +#define LSI_SCNTL1_SST 0x01 +#define LSI_SCNTL1_IARB 0x02 +#define LSI_SCNTL1_AESP 0x04 +#define LSI_SCNTL1_RST 0x08 +#define LSI_SCNTL1_CON 0x10 +#define LSI_SCNTL1_DHP 0x20 +#define LSI_SCNTL1_ADB 0x40 +#define LSI_SCNTL1_EXC 0x80 + +#define LSI_SCNTL2_WSR 0x01 +#define LSI_SCNTL2_VUE0 0x02 +#define LSI_SCNTL2_VUE1 0x04 +#define LSI_SCNTL2_WSS 0x08 +#define LSI_SCNTL2_SLPHBEN 0x10 +#define LSI_SCNTL2_SLPMD 0x20 +#define LSI_SCNTL2_CHM 0x40 +#define LSI_SCNTL2_SDU 0x80 + +#define LSI_ISTAT0_DIP 0x01 +#define LSI_ISTAT0_SIP 0x02 +#define LSI_ISTAT0_INTF 0x04 +#define LSI_ISTAT0_CON 0x08 +#define LSI_ISTAT0_SEM 0x10 +#define LSI_ISTAT0_SIGP 0x20 +#define LSI_ISTAT0_SRST 0x40 +#define LSI_ISTAT0_ABRT 0x80 + +#define LSI_ISTAT1_SI 0x01 +#define LSI_ISTAT1_SRUN 0x02 +#define LSI_ISTAT1_FLSH 0x04 + +#define LSI_SSTAT0_SDP0 0x01 +#define LSI_SSTAT0_RST 0x02 +#define LSI_SSTAT0_WOA 0x04 +#define LSI_SSTAT0_LOA 0x08 +#define LSI_SSTAT0_AIP 0x10 +#define LSI_SSTAT0_OLF 0x20 +#define LSI_SSTAT0_ORF 0x40 +#define LSI_SSTAT0_ILF 0x80 + +#define LSI_SIST0_PAR 0x01 +#define LSI_SIST0_RST 0x02 +#define LSI_SIST0_UDC 0x04 +#define LSI_SIST0_SGE 0x08 +#define LSI_SIST0_RSL 0x10 +#define LSI_SIST0_SEL 0x20 +#define LSI_SIST0_CMP 0x40 +#define LSI_SIST0_MA 0x80 + +#define LSI_SIST1_HTH 0x01 +#define LSI_SIST1_GEN 0x02 +#define LSI_SIST1_STO 0x04 +#define LSI_SIST1_SBMC 0x10 + +#define LSI_SOCL_IO 0x01 +#define LSI_SOCL_CD 0x02 +#define LSI_SOCL_MSG 0x04 +#define LSI_SOCL_ATN 0x08 +#define LSI_SOCL_SEL 0x10 +#define LSI_SOCL_BSY 0x20 +#define LSI_SOCL_ACK 0x40 +#define LSI_SOCL_REQ 0x80 + +#define LSI_DSTAT_IID 0x01 +#define LSI_DSTAT_SIR 0x04 +#define LSI_DSTAT_SSI 0x08 +#define LSI_DSTAT_ABRT 0x10 +#define LSI_DSTAT_BF 0x20 +#define LSI_DSTAT_MDPE 0x40 +#define LSI_DSTAT_DFE 0x80 + +#define LSI_DCNTL_COM 0x01 +#define LSI_DCNTL_IRQD 0x02 +#define LSI_DCNTL_STD 0x04 +#define LSI_DCNTL_IRQM 0x08 +#define LSI_DCNTL_SSM 0x10 +#define LSI_DCNTL_PFEN 0x20 +#define LSI_DCNTL_PFF 0x40 +#define LSI_DCNTL_CLSE 0x80 + +#define LSI_DMODE_MAN 0x01 +#define LSI_DMODE_BOF 0x02 +#define LSI_DMODE_ERMP 0x04 +#define LSI_DMODE_ERL 0x08 +#define LSI_DMODE_DIOM 0x10 +#define LSI_DMODE_SIOM 0x20 + +#define LSI_CTEST2_DACK 0x01 +#define LSI_CTEST2_DREQ 0x02 +#define LSI_CTEST2_TEOP 0x04 +#define LSI_CTEST2_PCICIE 0x08 +#define LSI_CTEST2_CM 0x10 +#define LSI_CTEST2_CIO 0x20 +#define LSI_CTEST2_SIGP 0x40 +#define LSI_CTEST2_DDIR 0x80 + +#define LSI_CTEST5_BL2 0x04 +#define LSI_CTEST5_DDIR 0x08 +#define LSI_CTEST5_MASR 0x10 +#define LSI_CTEST5_DFSN 0x20 +#define LSI_CTEST5_BBCK 0x40 +#define LSI_CTEST5_ADCK 0x80 + +#define LSI_CCNTL0_DILS 0x01 +#define LSI_CCNTL0_DISFC 0x10 +#define LSI_CCNTL0_ENNDJ 0x20 +#define LSI_CCNTL0_PMJCTL 0x40 +#define LSI_CCNTL0_ENPMJ 0x80 + +#define LSI_CCNTL1_EN64DBMV 0x01 +#define LSI_CCNTL1_EN64TIBMV 0x02 +#define LSI_CCNTL1_64TIMOD 0x04 +#define LSI_CCNTL1_DDAC 0x08 +#define LSI_CCNTL1_ZMOD 0x80 + +/* Enable Response to Reselection */ +#define LSI_SCID_RRE 0x60 + +#define LSI_CCNTL1_40BIT (LSI_CCNTL1_EN64TIBMV|LSI_CCNTL1_64TIMOD) + +#define PHASE_DO 0 +#define PHASE_DI 1 +#define PHASE_CMD 2 +#define PHASE_ST 3 +#define PHASE_MO 6 +#define PHASE_MI 7 +#define PHASE_MASK 7 + +/* Maximum length of MSG IN data. */ +#define LSI_MAX_MSGIN_LEN 8 + +/* Flag set if this is a tagged command. */ +#define LSI_TAG_VALID (1 << 16) + +typedef struct lsi_request { + SCSIRequest *req; + uint32_t tag; + uint32_t dma_len; + uint8_t *dma_buf; + uint32_t pending; + int out; + QTAILQ_ENTRY(lsi_request) next; +} lsi_request; + +typedef struct { + /*< private >*/ + PCIDevice parent_obj; + /*< public >*/ + + MemoryRegion mmio_io; + MemoryRegion ram_io; + MemoryRegion io_io; + + int carry; /* ??? Should this be an a visible register somewhere? */ + int status; + /* Action to take at the end of a MSG IN phase. + 0 = COMMAND, 1 = disconnect, 2 = DATA OUT, 3 = DATA IN. */ + int msg_action; + int msg_len; + uint8_t msg[LSI_MAX_MSGIN_LEN]; + /* 0 if SCRIPTS are running or stopped. + * 1 if a Wait Reselect instruction has been issued. + * 2 if processing DMA from lsi_execute_script. + * 3 if a DMA operation is in progress. */ + int waiting; + SCSIBus bus; + int current_lun; + /* The tag is a combination of the device ID and the SCSI tag. */ + uint32_t select_tag; + int command_complete; + QTAILQ_HEAD(, lsi_request) queue; + lsi_request *current; + + uint32_t dsa; + uint32_t temp; + uint32_t dnad; + uint32_t dbc; + uint8_t istat0; + uint8_t istat1; + uint8_t dcmd; + uint8_t dstat; + uint8_t dien; + uint8_t sist0; + uint8_t sist1; + uint8_t sien0; + uint8_t sien1; + uint8_t mbox0; + uint8_t mbox1; + uint8_t dfifo; + uint8_t ctest2; + uint8_t ctest3; + uint8_t ctest4; + uint8_t ctest5; + uint8_t ccntl0; + uint8_t ccntl1; + uint32_t dsp; + uint32_t dsps; + uint8_t dmode; + uint8_t dcntl; + uint8_t scntl0; + uint8_t scntl1; + uint8_t scntl2; + uint8_t scntl3; + uint8_t sstat0; + uint8_t sstat1; + uint8_t scid; + uint8_t sxfer; + uint8_t socl; + uint8_t sdid; + uint8_t ssid; + uint8_t sfbr; + uint8_t stest1; + uint8_t stest2; + uint8_t stest3; + uint8_t sidl; + uint8_t stime0; + uint8_t respid0; + uint8_t respid1; + uint32_t mmrs; + uint32_t mmws; + uint32_t sfs; + uint32_t drs; + uint32_t sbms; + uint32_t dbms; + uint32_t dnad64; + uint32_t pmjad1; + uint32_t pmjad2; + uint32_t rbc; + uint32_t ua; + uint32_t ia; + uint32_t sbc; + uint32_t csbc; + uint32_t scratch[18]; /* SCRATCHA-SCRATCHR */ + uint8_t sbr; + uint32_t adder; + + /* Script ram is stored as 32-bit words in host byteorder. */ + uint32_t script_ram[2048]; +} LSIState; + +#define TYPE_LSI53C810 "lsi53c810" +#define TYPE_LSI53C895A "lsi53c895a" + +#define LSI53C895A(obj) \ + OBJECT_CHECK(LSIState, (obj), TYPE_LSI53C895A) + +static inline int lsi_irq_on_rsl(LSIState *s) +{ + return (s->sien0 & LSI_SIST0_RSL) && (s->scid & LSI_SCID_RRE); +} + +static void lsi_soft_reset(LSIState *s) +{ + DPRINTF("Reset\n"); + s->carry = 0; + + s->msg_action = 0; + s->msg_len = 0; + s->waiting = 0; + s->dsa = 0; + s->dnad = 0; + s->dbc = 0; + s->temp = 0; + memset(s->scratch, 0, sizeof(s->scratch)); + s->istat0 = 0; + s->istat1 = 0; + s->dcmd = 0x40; + s->dstat = LSI_DSTAT_DFE; + s->dien = 0; + s->sist0 = 0; + s->sist1 = 0; + s->sien0 = 0; + s->sien1 = 0; + s->mbox0 = 0; + s->mbox1 = 0; + s->dfifo = 0; + s->ctest2 = LSI_CTEST2_DACK; + s->ctest3 = 0; + s->ctest4 = 0; + s->ctest5 = 0; + s->ccntl0 = 0; + s->ccntl1 = 0; + s->dsp = 0; + s->dsps = 0; + s->dmode = 0; + s->dcntl = 0; + s->scntl0 = 0xc0; + s->scntl1 = 0; + s->scntl2 = 0; + s->scntl3 = 0; + s->sstat0 = 0; + s->sstat1 = 0; + s->scid = 7; + s->sxfer = 0; + s->socl = 0; + s->sdid = 0; + s->ssid = 0; + s->stest1 = 0; + s->stest2 = 0; + s->stest3 = 0; + s->sidl = 0; + s->stime0 = 0; + s->respid0 = 0x80; + s->respid1 = 0; + s->mmrs = 0; + s->mmws = 0; + s->sfs = 0; + s->drs = 0; + s->sbms = 0; + s->dbms = 0; + s->dnad64 = 0; + s->pmjad1 = 0; + s->pmjad2 = 0; + s->rbc = 0; + s->ua = 0; + s->ia = 0; + s->sbc = 0; + s->csbc = 0; + s->sbr = 0; + assert(QTAILQ_EMPTY(&s->queue)); + assert(!s->current); +} + +static int lsi_dma_40bit(LSIState *s) +{ + if ((s->ccntl1 & LSI_CCNTL1_40BIT) == LSI_CCNTL1_40BIT) + return 1; + return 0; +} + +static int lsi_dma_ti64bit(LSIState *s) +{ + if ((s->ccntl1 & LSI_CCNTL1_EN64TIBMV) == LSI_CCNTL1_EN64TIBMV) + return 1; + return 0; +} + +static int lsi_dma_64bit(LSIState *s) +{ + if ((s->ccntl1 & LSI_CCNTL1_EN64DBMV) == LSI_CCNTL1_EN64DBMV) + return 1; + return 0; +} + +static uint8_t lsi_reg_readb(LSIState *s, int offset); +static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val); +static void lsi_execute_script(LSIState *s); +static void lsi_reselect(LSIState *s, lsi_request *p); + +static inline uint32_t read_dword(LSIState *s, uint32_t addr) +{ + uint32_t buf; + + pci_dma_read(PCI_DEVICE(s), addr, &buf, 4); + return cpu_to_le32(buf); +} + +static void lsi_stop_script(LSIState *s) +{ + s->istat1 &= ~LSI_ISTAT1_SRUN; +} + +static void lsi_update_irq(LSIState *s) +{ + PCIDevice *d = PCI_DEVICE(s); + int level; + static int last_level; + lsi_request *p; + + /* It's unclear whether the DIP/SIP bits should be cleared when the + Interrupt Status Registers are cleared or when istat0 is read. + We currently do the formwer, which seems to work. */ + level = 0; + if (s->dstat) { + if (s->dstat & s->dien) + level = 1; + s->istat0 |= LSI_ISTAT0_DIP; + } else { + s->istat0 &= ~LSI_ISTAT0_DIP; + } + + if (s->sist0 || s->sist1) { + if ((s->sist0 & s->sien0) || (s->sist1 & s->sien1)) + level = 1; + s->istat0 |= LSI_ISTAT0_SIP; + } else { + s->istat0 &= ~LSI_ISTAT0_SIP; + } + if (s->istat0 & LSI_ISTAT0_INTF) + level = 1; + + if (level != last_level) { + DPRINTF("Update IRQ level %d dstat %02x sist %02x%02x\n", + level, s->dstat, s->sist1, s->sist0); + last_level = level; + } + pci_set_irq(d, level); + + if (!level && lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON)) { + DPRINTF("Handled IRQs & disconnected, looking for pending " + "processes\n"); + QTAILQ_FOREACH(p, &s->queue, next) { + if (p->pending) { + lsi_reselect(s, p); + break; + } + } + } +} + +/* Stop SCRIPTS execution and raise a SCSI interrupt. */ +static void lsi_script_scsi_interrupt(LSIState *s, int stat0, int stat1) +{ + uint32_t mask0; + uint32_t mask1; + + DPRINTF("SCSI Interrupt 0x%02x%02x prev 0x%02x%02x\n", + stat1, stat0, s->sist1, s->sist0); + s->sist0 |= stat0; + s->sist1 |= stat1; + /* Stop processor on fatal or unmasked interrupt. As a special hack + we don't stop processing when raising STO. Instead continue + execution and stop at the next insn that accesses the SCSI bus. */ + mask0 = s->sien0 | ~(LSI_SIST0_CMP | LSI_SIST0_SEL | LSI_SIST0_RSL); + mask1 = s->sien1 | ~(LSI_SIST1_GEN | LSI_SIST1_HTH); + mask1 &= ~LSI_SIST1_STO; + if (s->sist0 & mask0 || s->sist1 & mask1) { + lsi_stop_script(s); + } + lsi_update_irq(s); +} + +/* Stop SCRIPTS execution and raise a DMA interrupt. */ +static void lsi_script_dma_interrupt(LSIState *s, int stat) +{ + DPRINTF("DMA Interrupt 0x%x prev 0x%x\n", stat, s->dstat); + s->dstat |= stat; + lsi_update_irq(s); + lsi_stop_script(s); +} + +static inline void lsi_set_phase(LSIState *s, int phase) +{ + s->sstat1 = (s->sstat1 & ~PHASE_MASK) | phase; +} + +static void lsi_bad_phase(LSIState *s, int out, int new_phase) +{ + /* Trigger a phase mismatch. */ + if (s->ccntl0 & LSI_CCNTL0_ENPMJ) { + if ((s->ccntl0 & LSI_CCNTL0_PMJCTL)) { + s->dsp = out ? s->pmjad1 : s->pmjad2; + } else { + s->dsp = (s->scntl2 & LSI_SCNTL2_WSR ? s->pmjad2 : s->pmjad1); + } + DPRINTF("Data phase mismatch jump to %08x\n", s->dsp); + } else { + DPRINTF("Phase mismatch interrupt\n"); + lsi_script_scsi_interrupt(s, LSI_SIST0_MA, 0); + lsi_stop_script(s); + } + lsi_set_phase(s, new_phase); +} + + +/* Resume SCRIPTS execution after a DMA operation. */ +static void lsi_resume_script(LSIState *s) +{ + if (s->waiting != 2) { + s->waiting = 0; + lsi_execute_script(s); + } else { + s->waiting = 0; + } +} + +static void lsi_disconnect(LSIState *s) +{ + s->scntl1 &= ~LSI_SCNTL1_CON; + s->sstat1 &= ~PHASE_MASK; +} + +static void lsi_bad_selection(LSIState *s, uint32_t id) +{ + DPRINTF("Selected absent target %d\n", id); + lsi_script_scsi_interrupt(s, 0, LSI_SIST1_STO); + lsi_disconnect(s); +} + +/* Initiate a SCSI layer data transfer. */ +static void lsi_do_dma(LSIState *s, int out) +{ + PCIDevice *pci_dev; + uint32_t count; + dma_addr_t addr; + SCSIDevice *dev; + + assert(s->current); + if (!s->current->dma_len) { + /* Wait until data is available. */ + DPRINTF("DMA no data available\n"); + return; + } + + pci_dev = PCI_DEVICE(s); + dev = s->current->req->dev; + assert(dev); + + count = s->dbc; + if (count > s->current->dma_len) + count = s->current->dma_len; + + addr = s->dnad; + /* both 40 and Table Indirect 64-bit DMAs store upper bits in dnad64 */ + if (lsi_dma_40bit(s) || lsi_dma_ti64bit(s)) + addr |= ((uint64_t)s->dnad64 << 32); + else if (s->dbms) + addr |= ((uint64_t)s->dbms << 32); + else if (s->sbms) + addr |= ((uint64_t)s->sbms << 32); + + DPRINTF("DMA addr=0x" DMA_ADDR_FMT " len=%d\n", addr, count); + s->csbc += count; + s->dnad += count; + s->dbc -= count; + if (s->current->dma_buf == NULL) { + s->current->dma_buf = scsi_req_get_buf(s->current->req); + } + /* ??? Set SFBR to first data byte. */ + if (out) { + pci_dma_read(pci_dev, addr, s->current->dma_buf, count); + } else { + pci_dma_write(pci_dev, addr, s->current->dma_buf, count); + } + s->current->dma_len -= count; + if (s->current->dma_len == 0) { + s->current->dma_buf = NULL; + scsi_req_continue(s->current->req); + } else { + s->current->dma_buf += count; + lsi_resume_script(s); + } +} + + +/* Add a command to the queue. */ +static void lsi_queue_command(LSIState *s) +{ + lsi_request *p = s->current; + + DPRINTF("Queueing tag=0x%x\n", p->tag); + assert(s->current != NULL); + assert(s->current->dma_len == 0); + QTAILQ_INSERT_TAIL(&s->queue, s->current, next); + s->current = NULL; + + p->pending = 0; + p->out = (s->sstat1 & PHASE_MASK) == PHASE_DO; +} + +/* Queue a byte for a MSG IN phase. */ +static void lsi_add_msg_byte(LSIState *s, uint8_t data) +{ + if (s->msg_len >= LSI_MAX_MSGIN_LEN) { + BADF("MSG IN data too long\n"); + } else { + DPRINTF("MSG IN 0x%02x\n", data); + s->msg[s->msg_len++] = data; + } +} + +/* Perform reselection to continue a command. */ +static void lsi_reselect(LSIState *s, lsi_request *p) +{ + int id; + + assert(s->current == NULL); + QTAILQ_REMOVE(&s->queue, p, next); + s->current = p; + + id = (p->tag >> 8) & 0xf; + s->ssid = id | 0x80; + /* LSI53C700 Family Compatibility, see LSI53C895A 4-73 */ + if (!(s->dcntl & LSI_DCNTL_COM)) { + s->sfbr = 1 << (id & 0x7); + } + DPRINTF("Reselected target %d\n", id); + s->scntl1 |= LSI_SCNTL1_CON; + lsi_set_phase(s, PHASE_MI); + s->msg_action = p->out ? 2 : 3; + s->current->dma_len = p->pending; + lsi_add_msg_byte(s, 0x80); + if (s->current->tag & LSI_TAG_VALID) { + lsi_add_msg_byte(s, 0x20); + lsi_add_msg_byte(s, p->tag & 0xff); + } + + if (lsi_irq_on_rsl(s)) { + lsi_script_scsi_interrupt(s, LSI_SIST0_RSL, 0); + } +} + +static lsi_request *lsi_find_by_tag(LSIState *s, uint32_t tag) +{ + lsi_request *p; + + QTAILQ_FOREACH(p, &s->queue, next) { + if (p->tag == tag) { + return p; + } + } + + return NULL; +} + +static void lsi_request_free(LSIState *s, lsi_request *p) +{ + if (p == s->current) { + s->current = NULL; + } else { + QTAILQ_REMOVE(&s->queue, p, next); + } + g_free(p); +} + +static void lsi_request_cancelled(SCSIRequest *req) +{ + LSIState *s = LSI53C895A(req->bus->qbus.parent); + lsi_request *p = req->hba_private; + + req->hba_private = NULL; + lsi_request_free(s, p); + scsi_req_unref(req); +} + +/* Record that data is available for a queued command. Returns zero if + the device was reselected, nonzero if the IO is deferred. */ +static int lsi_queue_req(LSIState *s, SCSIRequest *req, uint32_t len) +{ + lsi_request *p = req->hba_private; + + if (p->pending) { + BADF("Multiple IO pending for request %p\n", p); + } + p->pending = len; + /* Reselect if waiting for it, or if reselection triggers an IRQ + and the bus is free. + Since no interrupt stacking is implemented in the emulation, it + is also required that there are no pending interrupts waiting + for service from the device driver. */ + if (s->waiting == 1 || + (lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON) && + !(s->istat0 & (LSI_ISTAT0_SIP | LSI_ISTAT0_DIP)))) { + /* Reselect device. */ + lsi_reselect(s, p); + return 0; + } else { + DPRINTF("Queueing IO tag=0x%x\n", p->tag); + p->pending = len; + return 1; + } +} + + /* Callback to indicate that the SCSI layer has completed a command. */ +static void lsi_command_complete(SCSIRequest *req, uint32_t status, size_t resid) +{ + LSIState *s = LSI53C895A(req->bus->qbus.parent); + int out; + + out = (s->sstat1 & PHASE_MASK) == PHASE_DO; + DPRINTF("Command complete status=%d\n", (int)status); + s->status = status; + s->command_complete = 2; + if (s->waiting && s->dbc != 0) { + /* Raise phase mismatch for short transfers. */ + lsi_bad_phase(s, out, PHASE_ST); + } else { + lsi_set_phase(s, PHASE_ST); + } + + if (req->hba_private == s->current) { + req->hba_private = NULL; + lsi_request_free(s, s->current); + scsi_req_unref(req); + } + lsi_resume_script(s); +} + + /* Callback to indicate that the SCSI layer has completed a transfer. */ +static void lsi_transfer_data(SCSIRequest *req, uint32_t len) +{ + LSIState *s = LSI53C895A(req->bus->qbus.parent); + int out; + + assert(req->hba_private); + if (s->waiting == 1 || req->hba_private != s->current || + (lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON))) { + if (lsi_queue_req(s, req, len)) { + return; + } + } + + out = (s->sstat1 & PHASE_MASK) == PHASE_DO; + + /* host adapter (re)connected */ + DPRINTF("Data ready tag=0x%x len=%d\n", req->tag, len); + s->current->dma_len = len; + s->command_complete = 1; + if (s->waiting) { + if (s->waiting == 1 || s->dbc == 0) { + lsi_resume_script(s); + } else { + lsi_do_dma(s, out); + } + } +} + +static void lsi_do_command(LSIState *s) +{ + SCSIDevice *dev; + uint8_t buf[16]; + uint32_t id; + int n; + + DPRINTF("Send command len=%d\n", s->dbc); + if (s->dbc > 16) + s->dbc = 16; + pci_dma_read(PCI_DEVICE(s), s->dnad, buf, s->dbc); + s->sfbr = buf[0]; + s->command_complete = 0; + + id = (s->select_tag >> 8) & 0xf; + dev = scsi_device_find(&s->bus, 0, id, s->current_lun); + if (!dev) { + lsi_bad_selection(s, id); + return; + } + + assert(s->current == NULL); + s->current = g_new0(lsi_request, 1); + s->current->tag = s->select_tag; + s->current->req = scsi_req_new(dev, s->current->tag, s->current_lun, buf, + s->current); + + n = scsi_req_enqueue(s->current->req); + if (n) { + if (n > 0) { + lsi_set_phase(s, PHASE_DI); + } else if (n < 0) { + lsi_set_phase(s, PHASE_DO); + } + scsi_req_continue(s->current->req); + } + if (!s->command_complete) { + if (n) { + /* Command did not complete immediately so disconnect. */ + lsi_add_msg_byte(s, 2); /* SAVE DATA POINTER */ + lsi_add_msg_byte(s, 4); /* DISCONNECT */ + /* wait data */ + lsi_set_phase(s, PHASE_MI); + s->msg_action = 1; + lsi_queue_command(s); + } else { + /* wait command complete */ + lsi_set_phase(s, PHASE_DI); + } + } +} + +static void lsi_do_status(LSIState *s) +{ + uint8_t status; + DPRINTF("Get status len=%d status=%d\n", s->dbc, s->status); + if (s->dbc != 1) + BADF("Bad Status move\n"); + s->dbc = 1; + status = s->status; + s->sfbr = status; + pci_dma_write(PCI_DEVICE(s), s->dnad, &status, 1); + lsi_set_phase(s, PHASE_MI); + s->msg_action = 1; + lsi_add_msg_byte(s, 0); /* COMMAND COMPLETE */ +} + +static void lsi_do_msgin(LSIState *s) +{ + int len; + DPRINTF("Message in len=%d/%d\n", s->dbc, s->msg_len); + s->sfbr = s->msg[0]; + len = s->msg_len; + if (len > s->dbc) + len = s->dbc; + pci_dma_write(PCI_DEVICE(s), s->dnad, s->msg, len); + /* Linux drivers rely on the last byte being in the SIDL. */ + s->sidl = s->msg[len - 1]; + s->msg_len -= len; + if (s->msg_len) { + memmove(s->msg, s->msg + len, s->msg_len); + } else { + /* ??? Check if ATN (not yet implemented) is asserted and maybe + switch to PHASE_MO. */ + switch (s->msg_action) { + case 0: + lsi_set_phase(s, PHASE_CMD); + break; + case 1: + lsi_disconnect(s); + break; + case 2: + lsi_set_phase(s, PHASE_DO); + break; + case 3: + lsi_set_phase(s, PHASE_DI); + break; + default: + abort(); + } + } +} + +/* Read the next byte during a MSGOUT phase. */ +static uint8_t lsi_get_msgbyte(LSIState *s) +{ + uint8_t data; + pci_dma_read(PCI_DEVICE(s), s->dnad, &data, 1); + s->dnad++; + s->dbc--; + return data; +} + +/* Skip the next n bytes during a MSGOUT phase. */ +static void lsi_skip_msgbytes(LSIState *s, unsigned int n) +{ + s->dnad += n; + s->dbc -= n; +} + +static void lsi_do_msgout(LSIState *s) +{ + uint8_t msg; + int len; + uint32_t current_tag; + lsi_request *current_req, *p, *p_next; + + if (s->current) { + current_tag = s->current->tag; + current_req = s->current; + } else { + current_tag = s->select_tag; + current_req = lsi_find_by_tag(s, current_tag); + } + + DPRINTF("MSG out len=%d\n", s->dbc); + while (s->dbc) { + msg = lsi_get_msgbyte(s); + s->sfbr = msg; + + switch (msg) { + case 0x04: + DPRINTF("MSG: Disconnect\n"); + lsi_disconnect(s); + break; + case 0x08: + DPRINTF("MSG: No Operation\n"); + lsi_set_phase(s, PHASE_CMD); + break; + case 0x01: + len = lsi_get_msgbyte(s); + msg = lsi_get_msgbyte(s); + (void)len; /* avoid a warning about unused variable*/ + DPRINTF("Extended message 0x%x (len %d)\n", msg, len); + switch (msg) { + case 1: + DPRINTF("SDTR (ignored)\n"); + lsi_skip_msgbytes(s, 2); + break; + case 3: + DPRINTF("WDTR (ignored)\n"); + lsi_skip_msgbytes(s, 1); + break; + default: + goto bad; + } + break; + case 0x20: /* SIMPLE queue */ + s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID; + DPRINTF("SIMPLE queue tag=0x%x\n", s->select_tag & 0xff); + break; + case 0x21: /* HEAD of queue */ + BADF("HEAD queue not implemented\n"); + s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID; + break; + case 0x22: /* ORDERED queue */ + BADF("ORDERED queue not implemented\n"); + s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID; + break; + case 0x0d: + /* The ABORT TAG message clears the current I/O process only. */ + DPRINTF("MSG: ABORT TAG tag=0x%x\n", current_tag); + if (current_req) { + scsi_req_cancel(current_req->req); + } + lsi_disconnect(s); + break; + case 0x06: + case 0x0e: + case 0x0c: + /* The ABORT message clears all I/O processes for the selecting + initiator on the specified logical unit of the target. */ + if (msg == 0x06) { + DPRINTF("MSG: ABORT tag=0x%x\n", current_tag); + } + /* The CLEAR QUEUE message clears all I/O processes for all + initiators on the specified logical unit of the target. */ + if (msg == 0x0e) { + DPRINTF("MSG: CLEAR QUEUE tag=0x%x\n", current_tag); + } + /* The BUS DEVICE RESET message clears all I/O processes for all + initiators on all logical units of the target. */ + if (msg == 0x0c) { + DPRINTF("MSG: BUS DEVICE RESET tag=0x%x\n", current_tag); + } + + /* clear the current I/O process */ + if (s->current) { + scsi_req_cancel(s->current->req); + } + + /* As the current implemented devices scsi_disk and scsi_generic + only support one LUN, we don't need to keep track of LUNs. + Clearing I/O processes for other initiators could be possible + for scsi_generic by sending a SG_SCSI_RESET to the /dev/sgX + device, but this is currently not implemented (and seems not + to be really necessary). So let's simply clear all queued + commands for the current device: */ + QTAILQ_FOREACH_SAFE(p, &s->queue, next, p_next) { + if ((p->tag & 0x0000ff00) == (current_tag & 0x0000ff00)) { + scsi_req_cancel(p->req); + } + } + + lsi_disconnect(s); + break; + default: + if ((msg & 0x80) == 0) { + goto bad; + } + s->current_lun = msg & 7; + DPRINTF("Select LUN %d\n", s->current_lun); + lsi_set_phase(s, PHASE_CMD); + break; + } + } + return; +bad: + BADF("Unimplemented message 0x%02x\n", msg); + lsi_set_phase(s, PHASE_MI); + lsi_add_msg_byte(s, 7); /* MESSAGE REJECT */ + s->msg_action = 0; +} + +#define LSI_BUF_SIZE 4096 +static void lsi_memcpy(LSIState *s, uint32_t dest, uint32_t src, int count) +{ + PCIDevice *d = PCI_DEVICE(s); + int n; + uint8_t buf[LSI_BUF_SIZE]; + + DPRINTF("memcpy dest 0x%08x src 0x%08x count %d\n", dest, src, count); + while (count) { + n = (count > LSI_BUF_SIZE) ? LSI_BUF_SIZE : count; + pci_dma_read(d, src, buf, n); + pci_dma_write(d, dest, buf, n); + src += n; + dest += n; + count -= n; + } +} + +static void lsi_wait_reselect(LSIState *s) +{ + lsi_request *p; + + DPRINTF("Wait Reselect\n"); + + QTAILQ_FOREACH(p, &s->queue, next) { + if (p->pending) { + lsi_reselect(s, p); + break; + } + } + if (s->current == NULL) { + s->waiting = 1; + } +} + +static void lsi_execute_script(LSIState *s) +{ + PCIDevice *pci_dev = PCI_DEVICE(s); + uint32_t insn; + uint32_t addr, addr_high; + int opcode; + int insn_processed = 0; + + s->istat1 |= LSI_ISTAT1_SRUN; +again: + insn_processed++; + insn = read_dword(s, s->dsp); + if (!insn) { + /* If we receive an empty opcode increment the DSP by 4 bytes + instead of 8 and execute the next opcode at that location */ + s->dsp += 4; + goto again; + } + addr = read_dword(s, s->dsp + 4); + addr_high = 0; + DPRINTF("SCRIPTS dsp=%08x opcode %08x arg %08x\n", s->dsp, insn, addr); + s->dsps = addr; + s->dcmd = insn >> 24; + s->dsp += 8; + switch (insn >> 30) { + case 0: /* Block move. */ + if (s->sist1 & LSI_SIST1_STO) { + DPRINTF("Delayed select timeout\n"); + lsi_stop_script(s); + break; + } + s->dbc = insn & 0xffffff; + s->rbc = s->dbc; + /* ??? Set ESA. */ + s->ia = s->dsp - 8; + if (insn & (1 << 29)) { + /* Indirect addressing. */ + addr = read_dword(s, addr); + } else if (insn & (1 << 28)) { + uint32_t buf[2]; + int32_t offset; + /* Table indirect addressing. */ + + /* 32-bit Table indirect */ + offset = sextract32(addr, 0, 24); + pci_dma_read(pci_dev, s->dsa + offset, buf, 8); + /* byte count is stored in bits 0:23 only */ + s->dbc = cpu_to_le32(buf[0]) & 0xffffff; + s->rbc = s->dbc; + addr = cpu_to_le32(buf[1]); + + /* 40-bit DMA, upper addr bits [39:32] stored in first DWORD of + * table, bits [31:24] */ + if (lsi_dma_40bit(s)) + addr_high = cpu_to_le32(buf[0]) >> 24; + else if (lsi_dma_ti64bit(s)) { + int selector = (cpu_to_le32(buf[0]) >> 24) & 0x1f; + switch (selector) { + case 0 ... 0x0f: + /* offset index into scratch registers since + * TI64 mode can use registers C to R */ + addr_high = s->scratch[2 + selector]; + break; + case 0x10: + addr_high = s->mmrs; + break; + case 0x11: + addr_high = s->mmws; + break; + case 0x12: + addr_high = s->sfs; + break; + case 0x13: + addr_high = s->drs; + break; + case 0x14: + addr_high = s->sbms; + break; + case 0x15: + addr_high = s->dbms; + break; + default: + BADF("Illegal selector specified (0x%x > 0x15)" + " for 64-bit DMA block move", selector); + break; + } + } + } else if (lsi_dma_64bit(s)) { + /* fetch a 3rd dword if 64-bit direct move is enabled and + only if we're not doing table indirect or indirect addressing */ + s->dbms = read_dword(s, s->dsp); + s->dsp += 4; + s->ia = s->dsp - 12; + } + if ((s->sstat1 & PHASE_MASK) != ((insn >> 24) & 7)) { + DPRINTF("Wrong phase got %d expected %d\n", + s->sstat1 & PHASE_MASK, (insn >> 24) & 7); + lsi_script_scsi_interrupt(s, LSI_SIST0_MA, 0); + break; + } + s->dnad = addr; + s->dnad64 = addr_high; + switch (s->sstat1 & 0x7) { + case PHASE_DO: + s->waiting = 2; + lsi_do_dma(s, 1); + if (s->waiting) + s->waiting = 3; + break; + case PHASE_DI: + s->waiting = 2; + lsi_do_dma(s, 0); + if (s->waiting) + s->waiting = 3; + break; + case PHASE_CMD: + lsi_do_command(s); + break; + case PHASE_ST: + lsi_do_status(s); + break; + case PHASE_MO: + lsi_do_msgout(s); + break; + case PHASE_MI: + lsi_do_msgin(s); + break; + default: + BADF("Unimplemented phase %d\n", s->sstat1 & PHASE_MASK); + exit(1); + } + s->dfifo = s->dbc & 0xff; + s->ctest5 = (s->ctest5 & 0xfc) | ((s->dbc >> 8) & 3); + s->sbc = s->dbc; + s->rbc -= s->dbc; + s->ua = addr + s->dbc; + break; + + case 1: /* IO or Read/Write instruction. */ + opcode = (insn >> 27) & 7; + if (opcode < 5) { + uint32_t id; + + if (insn & (1 << 25)) { + id = read_dword(s, s->dsa + sextract32(insn, 0, 24)); + } else { + id = insn; + } + id = (id >> 16) & 0xf; + if (insn & (1 << 26)) { + addr = s->dsp + sextract32(addr, 0, 24); + } + s->dnad = addr; + switch (opcode) { + case 0: /* Select */ + s->sdid = id; + if (s->scntl1 & LSI_SCNTL1_CON) { + DPRINTF("Already reselected, jumping to alternative address\n"); + s->dsp = s->dnad; + break; + } + s->sstat0 |= LSI_SSTAT0_WOA; + s->scntl1 &= ~LSI_SCNTL1_IARB; + if (!scsi_device_find(&s->bus, 0, id, 0)) { + lsi_bad_selection(s, id); + break; + } + DPRINTF("Selected target %d%s\n", + id, insn & (1 << 3) ? " ATN" : ""); + /* ??? Linux drivers compain when this is set. Maybe + it only applies in low-level mode (unimplemented). + lsi_script_scsi_interrupt(s, LSI_SIST0_CMP, 0); */ + s->select_tag = id << 8; + s->scntl1 |= LSI_SCNTL1_CON; + if (insn & (1 << 3)) { + s->socl |= LSI_SOCL_ATN; + } + lsi_set_phase(s, PHASE_MO); + break; + case 1: /* Disconnect */ + DPRINTF("Wait Disconnect\n"); + s->scntl1 &= ~LSI_SCNTL1_CON; + break; + case 2: /* Wait Reselect */ + if (!lsi_irq_on_rsl(s)) { + lsi_wait_reselect(s); + } + break; + case 3: /* Set */ + DPRINTF("Set%s%s%s%s\n", + insn & (1 << 3) ? " ATN" : "", + insn & (1 << 6) ? " ACK" : "", + insn & (1 << 9) ? " TM" : "", + insn & (1 << 10) ? " CC" : ""); + if (insn & (1 << 3)) { + s->socl |= LSI_SOCL_ATN; + lsi_set_phase(s, PHASE_MO); + } + if (insn & (1 << 9)) { + BADF("Target mode not implemented\n"); + exit(1); + } + if (insn & (1 << 10)) + s->carry = 1; + break; + case 4: /* Clear */ + DPRINTF("Clear%s%s%s%s\n", + insn & (1 << 3) ? " ATN" : "", + insn & (1 << 6) ? " ACK" : "", + insn & (1 << 9) ? " TM" : "", + insn & (1 << 10) ? " CC" : ""); + if (insn & (1 << 3)) { + s->socl &= ~LSI_SOCL_ATN; + } + if (insn & (1 << 10)) + s->carry = 0; + break; + } + } else { + uint8_t op0; + uint8_t op1; + uint8_t data8; + int reg; + int operator; +#ifdef DEBUG_LSI + static const char *opcode_names[3] = + {"Write", "Read", "Read-Modify-Write"}; + static const char *operator_names[8] = + {"MOV", "SHL", "OR", "XOR", "AND", "SHR", "ADD", "ADC"}; +#endif + + reg = ((insn >> 16) & 0x7f) | (insn & 0x80); + data8 = (insn >> 8) & 0xff; + opcode = (insn >> 27) & 7; + operator = (insn >> 24) & 7; + DPRINTF("%s reg 0x%x %s data8=0x%02x sfbr=0x%02x%s\n", + opcode_names[opcode - 5], reg, + operator_names[operator], data8, s->sfbr, + (insn & (1 << 23)) ? " SFBR" : ""); + op0 = op1 = 0; + switch (opcode) { + case 5: /* From SFBR */ + op0 = s->sfbr; + op1 = data8; + break; + case 6: /* To SFBR */ + if (operator) + op0 = lsi_reg_readb(s, reg); + op1 = data8; + break; + case 7: /* Read-modify-write */ + if (operator) + op0 = lsi_reg_readb(s, reg); + if (insn & (1 << 23)) { + op1 = s->sfbr; + } else { + op1 = data8; + } + break; + } + + switch (operator) { + case 0: /* move */ + op0 = op1; + break; + case 1: /* Shift left */ + op1 = op0 >> 7; + op0 = (op0 << 1) | s->carry; + s->carry = op1; + break; + case 2: /* OR */ + op0 |= op1; + break; + case 3: /* XOR */ + op0 ^= op1; + break; + case 4: /* AND */ + op0 &= op1; + break; + case 5: /* SHR */ + op1 = op0 & 1; + op0 = (op0 >> 1) | (s->carry << 7); + s->carry = op1; + break; + case 6: /* ADD */ + op0 += op1; + s->carry = op0 < op1; + break; + case 7: /* ADC */ + op0 += op1 + s->carry; + if (s->carry) + s->carry = op0 <= op1; + else + s->carry = op0 < op1; + break; + } + + switch (opcode) { + case 5: /* From SFBR */ + case 7: /* Read-modify-write */ + lsi_reg_writeb(s, reg, op0); + break; + case 6: /* To SFBR */ + s->sfbr = op0; + break; + } + } + break; + + case 2: /* Transfer Control. */ + { + int cond; + int jmp; + + if ((insn & 0x002e0000) == 0) { + DPRINTF("NOP\n"); + break; + } + if (s->sist1 & LSI_SIST1_STO) { + DPRINTF("Delayed select timeout\n"); + lsi_stop_script(s); + break; + } + cond = jmp = (insn & (1 << 19)) != 0; + if (cond == jmp && (insn & (1 << 21))) { + DPRINTF("Compare carry %d\n", s->carry == jmp); + cond = s->carry != 0; + } + if (cond == jmp && (insn & (1 << 17))) { + DPRINTF("Compare phase %d %c= %d\n", + (s->sstat1 & PHASE_MASK), + jmp ? '=' : '!', + ((insn >> 24) & 7)); + cond = (s->sstat1 & PHASE_MASK) == ((insn >> 24) & 7); + } + if (cond == jmp && (insn & (1 << 18))) { + uint8_t mask; + + mask = (~insn >> 8) & 0xff; + DPRINTF("Compare data 0x%x & 0x%x %c= 0x%x\n", + s->sfbr, mask, jmp ? '=' : '!', insn & mask); + cond = (s->sfbr & mask) == (insn & mask); + } + if (cond == jmp) { + if (insn & (1 << 23)) { + /* Relative address. */ + addr = s->dsp + sextract32(addr, 0, 24); + } + switch ((insn >> 27) & 7) { + case 0: /* Jump */ + DPRINTF("Jump to 0x%08x\n", addr); + s->adder = addr; + s->dsp = addr; + break; + case 1: /* Call */ + DPRINTF("Call 0x%08x\n", addr); + s->temp = s->dsp; + s->dsp = addr; + break; + case 2: /* Return */ + DPRINTF("Return to 0x%08x\n", s->temp); + s->dsp = s->temp; + break; + case 3: /* Interrupt */ + DPRINTF("Interrupt 0x%08x\n", s->dsps); + if ((insn & (1 << 20)) != 0) { + s->istat0 |= LSI_ISTAT0_INTF; + lsi_update_irq(s); + } else { + lsi_script_dma_interrupt(s, LSI_DSTAT_SIR); + } + break; + default: + DPRINTF("Illegal transfer control\n"); + lsi_script_dma_interrupt(s, LSI_DSTAT_IID); + break; + } + } else { + DPRINTF("Control condition failed\n"); + } + } + break; + + case 3: + if ((insn & (1 << 29)) == 0) { + /* Memory move. */ + uint32_t dest; + /* ??? The docs imply the destination address is loaded into + the TEMP register. However the Linux drivers rely on + the value being presrved. */ + dest = read_dword(s, s->dsp); + s->dsp += 4; + lsi_memcpy(s, dest, addr, insn & 0xffffff); + } else { + uint8_t data[7]; + int reg; + int n; + int i; + + if (insn & (1 << 28)) { + addr = s->dsa + sextract32(addr, 0, 24); + } + n = (insn & 7); + reg = (insn >> 16) & 0xff; + if (insn & (1 << 24)) { + pci_dma_read(pci_dev, addr, data, n); + DPRINTF("Load reg 0x%x size %d addr 0x%08x = %08x\n", reg, n, + addr, *(int *)data); + for (i = 0; i < n; i++) { + lsi_reg_writeb(s, reg + i, data[i]); + } + } else { + DPRINTF("Store reg 0x%x size %d addr 0x%08x\n", reg, n, addr); + for (i = 0; i < n; i++) { + data[i] = lsi_reg_readb(s, reg + i); + } + pci_dma_write(pci_dev, addr, data, n); + } + } + } + if (insn_processed > 10000 && !s->waiting) { + /* Some windows drivers make the device spin waiting for a memory + location to change. If we have been executed a lot of code then + assume this is the case and force an unexpected device disconnect. + This is apparently sufficient to beat the drivers into submission. + */ + if (!(s->sien0 & LSI_SIST0_UDC)) + fprintf(stderr, "inf. loop with UDC masked\n"); + lsi_script_scsi_interrupt(s, LSI_SIST0_UDC, 0); + lsi_disconnect(s); + } else if (s->istat1 & LSI_ISTAT1_SRUN && !s->waiting) { + if (s->dcntl & LSI_DCNTL_SSM) { + lsi_script_dma_interrupt(s, LSI_DSTAT_SSI); + } else { + goto again; + } + } + DPRINTF("SCRIPTS execution stopped\n"); +} + +static uint8_t lsi_reg_readb(LSIState *s, int offset) +{ + uint8_t tmp; +#define CASE_GET_REG24(name, addr) \ + case addr: return s->name & 0xff; \ + case addr + 1: return (s->name >> 8) & 0xff; \ + case addr + 2: return (s->name >> 16) & 0xff; + +#define CASE_GET_REG32(name, addr) \ + case addr: return s->name & 0xff; \ + case addr + 1: return (s->name >> 8) & 0xff; \ + case addr + 2: return (s->name >> 16) & 0xff; \ + case addr + 3: return (s->name >> 24) & 0xff; + +#ifdef DEBUG_LSI_REG + DPRINTF("Read reg %x\n", offset); +#endif + switch (offset) { + case 0x00: /* SCNTL0 */ + return s->scntl0; + case 0x01: /* SCNTL1 */ + return s->scntl1; + case 0x02: /* SCNTL2 */ + return s->scntl2; + case 0x03: /* SCNTL3 */ + return s->scntl3; + case 0x04: /* SCID */ + return s->scid; + case 0x05: /* SXFER */ + return s->sxfer; + case 0x06: /* SDID */ + return s->sdid; + case 0x07: /* GPREG0 */ + return 0x7f; + case 0x08: /* Revision ID */ + return 0x00; + case 0x09: /* SOCL */ + return s->socl; + case 0xa: /* SSID */ + return s->ssid; + case 0xb: /* SBCL */ + /* ??? This is not correct. However it's (hopefully) only + used for diagnostics, so should be ok. */ + return 0; + case 0xc: /* DSTAT */ + tmp = s->dstat | LSI_DSTAT_DFE; + if ((s->istat0 & LSI_ISTAT0_INTF) == 0) + s->dstat = 0; + lsi_update_irq(s); + return tmp; + case 0x0d: /* SSTAT0 */ + return s->sstat0; + case 0x0e: /* SSTAT1 */ + return s->sstat1; + case 0x0f: /* SSTAT2 */ + return s->scntl1 & LSI_SCNTL1_CON ? 0 : 2; + CASE_GET_REG32(dsa, 0x10) + case 0x14: /* ISTAT0 */ + return s->istat0; + case 0x15: /* ISTAT1 */ + return s->istat1; + case 0x16: /* MBOX0 */ + return s->mbox0; + case 0x17: /* MBOX1 */ + return s->mbox1; + case 0x18: /* CTEST0 */ + return 0xff; + case 0x19: /* CTEST1 */ + return 0; + case 0x1a: /* CTEST2 */ + tmp = s->ctest2 | LSI_CTEST2_DACK | LSI_CTEST2_CM; + if (s->istat0 & LSI_ISTAT0_SIGP) { + s->istat0 &= ~LSI_ISTAT0_SIGP; + tmp |= LSI_CTEST2_SIGP; + } + return tmp; + case 0x1b: /* CTEST3 */ + return s->ctest3; + CASE_GET_REG32(temp, 0x1c) + case 0x20: /* DFIFO */ + return 0; + case 0x21: /* CTEST4 */ + return s->ctest4; + case 0x22: /* CTEST5 */ + return s->ctest5; + case 0x23: /* CTEST6 */ + return 0; + CASE_GET_REG24(dbc, 0x24) + case 0x27: /* DCMD */ + return s->dcmd; + CASE_GET_REG32(dnad, 0x28) + CASE_GET_REG32(dsp, 0x2c) + CASE_GET_REG32(dsps, 0x30) + CASE_GET_REG32(scratch[0], 0x34) + case 0x38: /* DMODE */ + return s->dmode; + case 0x39: /* DIEN */ + return s->dien; + case 0x3a: /* SBR */ + return s->sbr; + case 0x3b: /* DCNTL */ + return s->dcntl; + /* ADDER Output (Debug of relative jump address) */ + CASE_GET_REG32(adder, 0x3c) + case 0x40: /* SIEN0 */ + return s->sien0; + case 0x41: /* SIEN1 */ + return s->sien1; + case 0x42: /* SIST0 */ + tmp = s->sist0; + s->sist0 = 0; + lsi_update_irq(s); + return tmp; + case 0x43: /* SIST1 */ + tmp = s->sist1; + s->sist1 = 0; + lsi_update_irq(s); + return tmp; + case 0x46: /* MACNTL */ + return 0x0f; + case 0x47: /* GPCNTL0 */ + return 0x0f; + case 0x48: /* STIME0 */ + return s->stime0; + case 0x4a: /* RESPID0 */ + return s->respid0; + case 0x4b: /* RESPID1 */ + return s->respid1; + case 0x4d: /* STEST1 */ + return s->stest1; + case 0x4e: /* STEST2 */ + return s->stest2; + case 0x4f: /* STEST3 */ + return s->stest3; + case 0x50: /* SIDL */ + /* This is needed by the linux drivers. We currently only update it + during the MSG IN phase. */ + return s->sidl; + case 0x52: /* STEST4 */ + return 0xe0; + case 0x56: /* CCNTL0 */ + return s->ccntl0; + case 0x57: /* CCNTL1 */ + return s->ccntl1; + case 0x58: /* SBDL */ + /* Some drivers peek at the data bus during the MSG IN phase. */ + if ((s->sstat1 & PHASE_MASK) == PHASE_MI) + return s->msg[0]; + return 0; + case 0x59: /* SBDL high */ + return 0; + CASE_GET_REG32(mmrs, 0xa0) + CASE_GET_REG32(mmws, 0xa4) + CASE_GET_REG32(sfs, 0xa8) + CASE_GET_REG32(drs, 0xac) + CASE_GET_REG32(sbms, 0xb0) + CASE_GET_REG32(dbms, 0xb4) + CASE_GET_REG32(dnad64, 0xb8) + CASE_GET_REG32(pmjad1, 0xc0) + CASE_GET_REG32(pmjad2, 0xc4) + CASE_GET_REG32(rbc, 0xc8) + CASE_GET_REG32(ua, 0xcc) + CASE_GET_REG32(ia, 0xd4) + CASE_GET_REG32(sbc, 0xd8) + CASE_GET_REG32(csbc, 0xdc) + } + if (offset >= 0x5c && offset < 0xa0) { + int n; + int shift; + n = (offset - 0x58) >> 2; + shift = (offset & 3) * 8; + return (s->scratch[n] >> shift) & 0xff; + } + BADF("readb 0x%x\n", offset); + exit(1); +#undef CASE_GET_REG24 +#undef CASE_GET_REG32 +} + +static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val) +{ +#define CASE_SET_REG24(name, addr) \ + case addr : s->name &= 0xffffff00; s->name |= val; break; \ + case addr + 1: s->name &= 0xffff00ff; s->name |= val << 8; break; \ + case addr + 2: s->name &= 0xff00ffff; s->name |= val << 16; break; + +#define CASE_SET_REG32(name, addr) \ + case addr : s->name &= 0xffffff00; s->name |= val; break; \ + case addr + 1: s->name &= 0xffff00ff; s->name |= val << 8; break; \ + case addr + 2: s->name &= 0xff00ffff; s->name |= val << 16; break; \ + case addr + 3: s->name &= 0x00ffffff; s->name |= val << 24; break; + +#ifdef DEBUG_LSI_REG + DPRINTF("Write reg %x = %02x\n", offset, val); +#endif + switch (offset) { + case 0x00: /* SCNTL0 */ + s->scntl0 = val; + if (val & LSI_SCNTL0_START) { + BADF("Start sequence not implemented\n"); + } + break; + case 0x01: /* SCNTL1 */ + s->scntl1 = val & ~LSI_SCNTL1_SST; + if (val & LSI_SCNTL1_IARB) { + BADF("Immediate Arbritration not implemented\n"); + } + if (val & LSI_SCNTL1_RST) { + if (!(s->sstat0 & LSI_SSTAT0_RST)) { + qbus_reset_all(&s->bus.qbus); + s->sstat0 |= LSI_SSTAT0_RST; + lsi_script_scsi_interrupt(s, LSI_SIST0_RST, 0); + } + } else { + s->sstat0 &= ~LSI_SSTAT0_RST; + } + break; + case 0x02: /* SCNTL2 */ + val &= ~(LSI_SCNTL2_WSR | LSI_SCNTL2_WSS); + s->scntl2 = val; + break; + case 0x03: /* SCNTL3 */ + s->scntl3 = val; + break; + case 0x04: /* SCID */ + s->scid = val; + break; + case 0x05: /* SXFER */ + s->sxfer = val; + break; + case 0x06: /* SDID */ + if ((s->ssid & 0x80) && (val & 0xf) != (s->ssid & 0xf)) { + BADF("Destination ID does not match SSID\n"); + } + s->sdid = val & 0xf; + break; + case 0x07: /* GPREG0 */ + break; + case 0x08: /* SFBR */ + /* The CPU is not allowed to write to this register. However the + SCRIPTS register move instructions are. */ + s->sfbr = val; + break; + case 0x0a: case 0x0b: + /* Openserver writes to these readonly registers on startup */ + return; + case 0x0c: case 0x0d: case 0x0e: case 0x0f: + /* Linux writes to these readonly registers on startup. */ + return; + CASE_SET_REG32(dsa, 0x10) + case 0x14: /* ISTAT0 */ + s->istat0 = (s->istat0 & 0x0f) | (val & 0xf0); + if (val & LSI_ISTAT0_ABRT) { + lsi_script_dma_interrupt(s, LSI_DSTAT_ABRT); + } + if (val & LSI_ISTAT0_INTF) { + s->istat0 &= ~LSI_ISTAT0_INTF; + lsi_update_irq(s); + } + if (s->waiting == 1 && val & LSI_ISTAT0_SIGP) { + DPRINTF("Woken by SIGP\n"); + s->waiting = 0; + s->dsp = s->dnad; + lsi_execute_script(s); + } + if (val & LSI_ISTAT0_SRST) { + qdev_reset_all(DEVICE(s)); + } + break; + case 0x16: /* MBOX0 */ + s->mbox0 = val; + break; + case 0x17: /* MBOX1 */ + s->mbox1 = val; + break; + case 0x18: /* CTEST0 */ + /* nothing to do */ + break; + case 0x1a: /* CTEST2 */ + s->ctest2 = val & LSI_CTEST2_PCICIE; + break; + case 0x1b: /* CTEST3 */ + s->ctest3 = val & 0x0f; + break; + CASE_SET_REG32(temp, 0x1c) + case 0x21: /* CTEST4 */ + if (val & 7) { + BADF("Unimplemented CTEST4-FBL 0x%x\n", val); + } + s->ctest4 = val; + break; + case 0x22: /* CTEST5 */ + if (val & (LSI_CTEST5_ADCK | LSI_CTEST5_BBCK)) { + BADF("CTEST5 DMA increment not implemented\n"); + } + s->ctest5 = val; + break; + CASE_SET_REG24(dbc, 0x24) + CASE_SET_REG32(dnad, 0x28) + case 0x2c: /* DSP[0:7] */ + s->dsp &= 0xffffff00; + s->dsp |= val; + break; + case 0x2d: /* DSP[8:15] */ + s->dsp &= 0xffff00ff; + s->dsp |= val << 8; + break; + case 0x2e: /* DSP[16:23] */ + s->dsp &= 0xff00ffff; + s->dsp |= val << 16; + break; + case 0x2f: /* DSP[24:31] */ + s->dsp &= 0x00ffffff; + s->dsp |= val << 24; + if ((s->dmode & LSI_DMODE_MAN) == 0 + && (s->istat1 & LSI_ISTAT1_SRUN) == 0) + lsi_execute_script(s); + break; + CASE_SET_REG32(dsps, 0x30) + CASE_SET_REG32(scratch[0], 0x34) + case 0x38: /* DMODE */ + if (val & (LSI_DMODE_SIOM | LSI_DMODE_DIOM)) { + BADF("IO mappings not implemented\n"); + } + s->dmode = val; + break; + case 0x39: /* DIEN */ + s->dien = val; + lsi_update_irq(s); + break; + case 0x3a: /* SBR */ + s->sbr = val; + break; + case 0x3b: /* DCNTL */ + s->dcntl = val & ~(LSI_DCNTL_PFF | LSI_DCNTL_STD); + if ((val & LSI_DCNTL_STD) && (s->istat1 & LSI_ISTAT1_SRUN) == 0) + lsi_execute_script(s); + break; + case 0x40: /* SIEN0 */ + s->sien0 = val; + lsi_update_irq(s); + break; + case 0x41: /* SIEN1 */ + s->sien1 = val; + lsi_update_irq(s); + break; + case 0x47: /* GPCNTL0 */ + break; + case 0x48: /* STIME0 */ + s->stime0 = val; + break; + case 0x49: /* STIME1 */ + if (val & 0xf) { + DPRINTF("General purpose timer not implemented\n"); + /* ??? Raising the interrupt immediately seems to be sufficient + to keep the FreeBSD driver happy. */ + lsi_script_scsi_interrupt(s, 0, LSI_SIST1_GEN); + } + break; + case 0x4a: /* RESPID0 */ + s->respid0 = val; + break; + case 0x4b: /* RESPID1 */ + s->respid1 = val; + break; + case 0x4d: /* STEST1 */ + s->stest1 = val; + break; + case 0x4e: /* STEST2 */ + if (val & 1) { + BADF("Low level mode not implemented\n"); + } + s->stest2 = val; + break; + case 0x4f: /* STEST3 */ + if (val & 0x41) { + BADF("SCSI FIFO test mode not implemented\n"); + } + s->stest3 = val; + break; + case 0x56: /* CCNTL0 */ + s->ccntl0 = val; + break; + case 0x57: /* CCNTL1 */ + s->ccntl1 = val; + break; + CASE_SET_REG32(mmrs, 0xa0) + CASE_SET_REG32(mmws, 0xa4) + CASE_SET_REG32(sfs, 0xa8) + CASE_SET_REG32(drs, 0xac) + CASE_SET_REG32(sbms, 0xb0) + CASE_SET_REG32(dbms, 0xb4) + CASE_SET_REG32(dnad64, 0xb8) + CASE_SET_REG32(pmjad1, 0xc0) + CASE_SET_REG32(pmjad2, 0xc4) + CASE_SET_REG32(rbc, 0xc8) + CASE_SET_REG32(ua, 0xcc) + CASE_SET_REG32(ia, 0xd4) + CASE_SET_REG32(sbc, 0xd8) + CASE_SET_REG32(csbc, 0xdc) + default: + if (offset >= 0x5c && offset < 0xa0) { + int n; + int shift; + n = (offset - 0x58) >> 2; + shift = (offset & 3) * 8; + s->scratch[n] = deposit32(s->scratch[n], shift, 8, val); + } else { + BADF("Unhandled writeb 0x%x = 0x%x\n", offset, val); + } + } +#undef CASE_SET_REG24 +#undef CASE_SET_REG32 +} + +static void lsi_mmio_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + LSIState *s = opaque; + + lsi_reg_writeb(s, addr & 0xff, val); +} + +static uint64_t lsi_mmio_read(void *opaque, hwaddr addr, + unsigned size) +{ + LSIState *s = opaque; + + return lsi_reg_readb(s, addr & 0xff); +} + +static const MemoryRegionOps lsi_mmio_ops = { + .read = lsi_mmio_read, + .write = lsi_mmio_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + .min_access_size = 1, + .max_access_size = 1, + }, +}; + +static void lsi_ram_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + LSIState *s = opaque; + uint32_t newval; + uint32_t mask; + int shift; + + newval = s->script_ram[addr >> 2]; + shift = (addr & 3) * 8; + mask = ((uint64_t)1 << (size * 8)) - 1; + newval &= ~(mask << shift); + newval |= val << shift; + s->script_ram[addr >> 2] = newval; +} + +static uint64_t lsi_ram_read(void *opaque, hwaddr addr, + unsigned size) +{ + LSIState *s = opaque; + uint32_t val; + uint32_t mask; + + val = s->script_ram[addr >> 2]; + mask = ((uint64_t)1 << (size * 8)) - 1; + val >>= (addr & 3) * 8; + return val & mask; +} + +static const MemoryRegionOps lsi_ram_ops = { + .read = lsi_ram_read, + .write = lsi_ram_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static uint64_t lsi_io_read(void *opaque, hwaddr addr, + unsigned size) +{ + LSIState *s = opaque; + return lsi_reg_readb(s, addr & 0xff); +} + +static void lsi_io_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + LSIState *s = opaque; + lsi_reg_writeb(s, addr & 0xff, val); +} + +static const MemoryRegionOps lsi_io_ops = { + .read = lsi_io_read, + .write = lsi_io_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + .min_access_size = 1, + .max_access_size = 1, + }, +}; + +static void lsi_scsi_reset(DeviceState *dev) +{ + LSIState *s = LSI53C895A(dev); + + lsi_soft_reset(s); +} + +static void lsi_pre_save(void *opaque) +{ + LSIState *s = opaque; + + if (s->current) { + assert(s->current->dma_buf == NULL); + assert(s->current->dma_len == 0); + } + assert(QTAILQ_EMPTY(&s->queue)); +} + +static const VMStateDescription vmstate_lsi_scsi = { + .name = "lsiscsi", + .version_id = 0, + .minimum_version_id = 0, + .pre_save = lsi_pre_save, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(parent_obj, LSIState), + + VMSTATE_INT32(carry, LSIState), + VMSTATE_INT32(status, LSIState), + VMSTATE_INT32(msg_action, LSIState), + VMSTATE_INT32(msg_len, LSIState), + VMSTATE_BUFFER(msg, LSIState), + VMSTATE_INT32(waiting, LSIState), + + VMSTATE_UINT32(dsa, LSIState), + VMSTATE_UINT32(temp, LSIState), + VMSTATE_UINT32(dnad, LSIState), + VMSTATE_UINT32(dbc, LSIState), + VMSTATE_UINT8(istat0, LSIState), + VMSTATE_UINT8(istat1, LSIState), + VMSTATE_UINT8(dcmd, LSIState), + VMSTATE_UINT8(dstat, LSIState), + VMSTATE_UINT8(dien, LSIState), + VMSTATE_UINT8(sist0, LSIState), + VMSTATE_UINT8(sist1, LSIState), + VMSTATE_UINT8(sien0, LSIState), + VMSTATE_UINT8(sien1, LSIState), + VMSTATE_UINT8(mbox0, LSIState), + VMSTATE_UINT8(mbox1, LSIState), + VMSTATE_UINT8(dfifo, LSIState), + VMSTATE_UINT8(ctest2, LSIState), + VMSTATE_UINT8(ctest3, LSIState), + VMSTATE_UINT8(ctest4, LSIState), + VMSTATE_UINT8(ctest5, LSIState), + VMSTATE_UINT8(ccntl0, LSIState), + VMSTATE_UINT8(ccntl1, LSIState), + VMSTATE_UINT32(dsp, LSIState), + VMSTATE_UINT32(dsps, LSIState), + VMSTATE_UINT8(dmode, LSIState), + VMSTATE_UINT8(dcntl, LSIState), + VMSTATE_UINT8(scntl0, LSIState), + VMSTATE_UINT8(scntl1, LSIState), + VMSTATE_UINT8(scntl2, LSIState), + VMSTATE_UINT8(scntl3, LSIState), + VMSTATE_UINT8(sstat0, LSIState), + VMSTATE_UINT8(sstat1, LSIState), + VMSTATE_UINT8(scid, LSIState), + VMSTATE_UINT8(sxfer, LSIState), + VMSTATE_UINT8(socl, LSIState), + VMSTATE_UINT8(sdid, LSIState), + VMSTATE_UINT8(ssid, LSIState), + VMSTATE_UINT8(sfbr, LSIState), + VMSTATE_UINT8(stest1, LSIState), + VMSTATE_UINT8(stest2, LSIState), + VMSTATE_UINT8(stest3, LSIState), + VMSTATE_UINT8(sidl, LSIState), + VMSTATE_UINT8(stime0, LSIState), + VMSTATE_UINT8(respid0, LSIState), + VMSTATE_UINT8(respid1, LSIState), + VMSTATE_UINT32(mmrs, LSIState), + VMSTATE_UINT32(mmws, LSIState), + VMSTATE_UINT32(sfs, LSIState), + VMSTATE_UINT32(drs, LSIState), + VMSTATE_UINT32(sbms, LSIState), + VMSTATE_UINT32(dbms, LSIState), + VMSTATE_UINT32(dnad64, LSIState), + VMSTATE_UINT32(pmjad1, LSIState), + VMSTATE_UINT32(pmjad2, LSIState), + VMSTATE_UINT32(rbc, LSIState), + VMSTATE_UINT32(ua, LSIState), + VMSTATE_UINT32(ia, LSIState), + VMSTATE_UINT32(sbc, LSIState), + VMSTATE_UINT32(csbc, LSIState), + VMSTATE_BUFFER_UNSAFE(scratch, LSIState, 0, 18 * sizeof(uint32_t)), + VMSTATE_UINT8(sbr, LSIState), + + VMSTATE_BUFFER_UNSAFE(script_ram, LSIState, 0, 2048 * sizeof(uint32_t)), + VMSTATE_END_OF_LIST() + } +}; + +static const struct SCSIBusInfo lsi_scsi_info = { + .tcq = true, + .max_target = LSI_MAX_DEVS, + .max_lun = 0, /* LUN support is buggy */ + + .transfer_data = lsi_transfer_data, + .complete = lsi_command_complete, + .cancel = lsi_request_cancelled +}; + +static void lsi_scsi_realize(PCIDevice *dev, Error **errp) +{ + LSIState *s = LSI53C895A(dev); + DeviceState *d = DEVICE(dev); + uint8_t *pci_conf; + + pci_conf = dev->config; + + /* PCI latency timer = 255 */ + pci_conf[PCI_LATENCY_TIMER] = 0xff; + /* Interrupt pin A */ + pci_conf[PCI_INTERRUPT_PIN] = 0x01; + + memory_region_init_io(&s->mmio_io, OBJECT(s), &lsi_mmio_ops, s, + "lsi-mmio", 0x400); + memory_region_init_io(&s->ram_io, OBJECT(s), &lsi_ram_ops, s, + "lsi-ram", 0x2000); + memory_region_init_io(&s->io_io, OBJECT(s), &lsi_io_ops, s, + "lsi-io", 256); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->io_io); + pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mmio_io); + pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->ram_io); + QTAILQ_INIT(&s->queue); + + scsi_bus_new(&s->bus, sizeof(s->bus), d, &lsi_scsi_info, NULL); + if (!d->hotplugged) { + scsi_bus_legacy_handle_cmdline(&s->bus, errp); + } +} + +static void lsi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + + k->realize = lsi_scsi_realize; + k->vendor_id = PCI_VENDOR_ID_LSI_LOGIC; + k->device_id = PCI_DEVICE_ID_LSI_53C895A; + k->class_id = PCI_CLASS_STORAGE_SCSI; + k->subsystem_id = 0x1000; + dc->reset = lsi_scsi_reset; + dc->vmsd = &vmstate_lsi_scsi; + set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); +} + +static const TypeInfo lsi_info = { + .name = TYPE_LSI53C895A, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(LSIState), + .class_init = lsi_class_init, +}; + +static void lsi53c810_class_init(ObjectClass *klass, void *data) +{ + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + + k->device_id = PCI_DEVICE_ID_LSI_53C810; +} + +static TypeInfo lsi53c810_info = { + .name = TYPE_LSI53C810, + .parent = TYPE_LSI53C895A, + .class_init = lsi53c810_class_init, +}; + +static void lsi53c895a_register_types(void) +{ + type_register_static(&lsi_info); + type_register_static(&lsi53c810_info); +} + +type_init(lsi53c895a_register_types) -- cgit 1.2.3-korg