Merge "These changes are the raw update to qemu-2.6."

1 files changed, 94 insertions, 8 deletions

diff --git a/qemu/hw/intc/arm_gic_common.c b/qemu/hw/intc/arm_gic_common.c
index a64d0714e..0a1f56af1 100644
--- a/qemu/hw/intc/arm_gic_common.c
+++ b/qemu/hw/intc/arm_gic_common.c
@@ -18,7 +18,10 @@
  * with this program; if not, see <http://www.gnu.org/licenses/>.
  */
 
+#include "qemu/osdep.h"
+#include "qapi/error.h"
 #include "gic_internal.h"
+#include "hw/arm/linux-boot-if.h"
 
 static void gic_pre_save(void *opaque)
 {
@@ -59,8 +62,8 @@ static const VMStateDescription vmstate_gic_irq_state = {
 
 static const VMStateDescription vmstate_gic = {
     .name = "arm_gic",
-    .version_id = 10,
-    .minimum_version_id = 10,
+    .version_id = 12,
+    .minimum_version_id = 12,
     .pre_save = gic_pre_save,
     .post_load = gic_post_load,
     .fields = (VMStateField[]) {
@@ -71,19 +74,59 @@ static const VMStateDescription vmstate_gic = {
         VMSTATE_UINT8_ARRAY(irq_target, GICState, GIC_MAXIRQ),
         VMSTATE_UINT8_2DARRAY(priority1, GICState, GIC_INTERNAL, GIC_NCPU),
         VMSTATE_UINT8_ARRAY(priority2, GICState, GIC_MAXIRQ - GIC_INTERNAL),
-        VMSTATE_UINT16_2DARRAY(last_active, GICState, GIC_MAXIRQ, GIC_NCPU),
         VMSTATE_UINT8_2DARRAY(sgi_pending, GICState, GIC_NR_SGIS, GIC_NCPU),
         VMSTATE_UINT16_ARRAY(priority_mask, GICState, GIC_NCPU),
-        VMSTATE_UINT16_ARRAY(running_irq, GICState, GIC_NCPU),
         VMSTATE_UINT16_ARRAY(running_priority, GICState, GIC_NCPU),
         VMSTATE_UINT16_ARRAY(current_pending, GICState, GIC_NCPU),
         VMSTATE_UINT8_ARRAY(bpr, GICState, GIC_NCPU),
         VMSTATE_UINT8_ARRAY(abpr, GICState, GIC_NCPU),
         VMSTATE_UINT32_2DARRAY(apr, GICState, GIC_NR_APRS, GIC_NCPU),
+        VMSTATE_UINT32_2DARRAY(nsapr, GICState, GIC_NR_APRS, GIC_NCPU),
         VMSTATE_END_OF_LIST()
     }
 };
 
+void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler,
+                            const MemoryRegionOps *ops)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(s);
+    int i = s->num_irq - GIC_INTERNAL;
+
+    /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
+     * GPIO array layout is thus:
+     *  [0..N-1] SPIs
+     *  [N..N+31] PPIs for CPU 0
+     *  [N+32..N+63] PPIs for CPU 1
+     *   ...
+     */
+    if (s->revision != REV_NVIC) {
+        i += (GIC_INTERNAL * s->num_cpu);
+    }
+    qdev_init_gpio_in(DEVICE(s), handler, i);
+
+    for (i = 0; i < s->num_cpu; i++) {
+        sysbus_init_irq(sbd, &s->parent_irq[i]);
+    }
+    for (i = 0; i < s->num_cpu; i++) {
+        sysbus_init_irq(sbd, &s->parent_fiq[i]);
+    }
+
+    /* Distributor */
+    memory_region_init_io(&s->iomem, OBJECT(s), ops, s, "gic_dist", 0x1000);
+    sysbus_init_mmio(sbd, &s->iomem);
+
+    if (s->revision != REV_NVIC) {
+        /* This is the main CPU interface "for this core". It is always
+         * present because it is required by both software emulation and KVM.
+         * NVIC is not handled here because its CPU interface is different,
+         * neither it can use KVM.
+         */
+        memory_region_init_io(&s->cpuiomem[0], OBJECT(s), ops ? &ops[1] : NULL,
+                              s, "gic_cpu", s->revision == 2 ? 0x2000 : 0x100);
+        sysbus_init_mmio(sbd, &s->cpuiomem[0]);
+    }
+}
+
 static void arm_gic_common_realize(DeviceState *dev, Error **errp)
 {
     GICState *s = ARM_GIC_COMMON(dev);
@@ -124,21 +167,35 @@ static void arm_gic_common_reset(DeviceState *dev)
 {
     GICState *s = ARM_GIC_COMMON(dev);
     int i, j;
+    int resetprio;
+
+    /* If we're resetting a TZ-aware GIC as if secure firmware
+     * had set it up ready to start a kernel in non-secure,
+     * we need to set interrupt priorities to a "zero for the
+     * NS view" value. This is particularly critical for the
+     * priority_mask[] values, because if they are zero then NS
+     * code cannot ever rewrite the priority to anything else.
+     */
+    if (s->security_extn && s->irq_reset_nonsecure) {
+        resetprio = 0x80;
+    } else {
+        resetprio = 0;
+    }
+
     memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
     for (i = 0 ; i < s->num_cpu; i++) {
         if (s->revision == REV_11MPCORE) {
             s->priority_mask[i] = 0xf0;
         } else {
-            s->priority_mask[i] = 0;
+            s->priority_mask[i] = resetprio;
         }
         s->current_pending[i] = 1023;
-        s->running_irq[i] = 1023;
         s->running_priority[i] = 0x100;
         s->cpu_ctlr[i] = 0;
         s->bpr[i] = GIC_MIN_BPR;
         s->abpr[i] = GIC_MIN_ABPR;
         for (j = 0; j < GIC_INTERNAL; j++) {
-            s->priority1[j][i] = 0;
+            s->priority1[j][i] = resetprio;
         }
         for (j = 0; j < GIC_NR_SGIS; j++) {
             s->sgi_pending[j][i] = 0;
@@ -150,7 +207,7 @@ static void arm_gic_common_reset(DeviceState *dev)
     }
 
     for (i = 0; i < ARRAY_SIZE(s->priority2); i++) {
-        s->priority2[i] = 0;
+        s->priority2[i] = resetprio;
     }
 
     for (i = 0; i < GIC_MAXIRQ; i++) {
@@ -161,9 +218,32 @@ static void arm_gic_common_reset(DeviceState *dev)
             s->irq_target[i] = 0;
         }
     }
+    if (s->security_extn && s->irq_reset_nonsecure) {
+        for (i = 0; i < GIC_MAXIRQ; i++) {
+            GIC_SET_GROUP(i, ALL_CPU_MASK);
+        }
+    }
+
     s->ctlr = 0;
 }
 
+static void arm_gic_common_linux_init(ARMLinuxBootIf *obj,
+                                      bool secure_boot)
+{
+    GICState *s = ARM_GIC_COMMON(obj);
+
+    if (s->security_extn && !secure_boot) {
+        /* We're directly booting a kernel into NonSecure. If this GIC
+         * implements the security extensions then we must configure it
+         * to have all the interrupts be NonSecure (this is a job that
+         * is done by the Secure boot firmware in real hardware, and in
+         * this mode QEMU is acting as a minimalist firmware-and-bootloader
+         * equivalent).
+         */
+        s->irq_reset_nonsecure = true;
+    }
+}
+
 static Property arm_gic_common_properties[] = {
     DEFINE_PROP_UINT32("num-cpu", GICState, num_cpu, 1),
     DEFINE_PROP_UINT32("num-irq", GICState, num_irq, 32),
@@ -180,11 +260,13 @@ static Property arm_gic_common_properties[] = {
 static void arm_gic_common_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
+    ARMLinuxBootIfClass *albifc = ARM_LINUX_BOOT_IF_CLASS(klass);
 
     dc->reset = arm_gic_common_reset;
     dc->realize = arm_gic_common_realize;
     dc->props = arm_gic_common_properties;
     dc->vmsd = &vmstate_gic;
+    albifc->arm_linux_init = arm_gic_common_linux_init;
 }
 
 static const TypeInfo arm_gic_common_type = {
@@ -194,6 +276,10 @@ static const TypeInfo arm_gic_common_type = {
     .class_size = sizeof(ARMGICCommonClass),
     .class_init = arm_gic_common_class_init,
     .abstract = true,
+    .interfaces = (InterfaceInfo []) {
+        { TYPE_ARM_LINUX_BOOT_IF },
+        { },
+    },
 };
 
 static void register_types(void)