Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 635 deletions

diff --git a/qemu/hw/ide/internal.h b/qemu/hw/ide/internal.h
deleted file mode 100644
index d2c458f57..000000000
--- a/qemu/hw/ide/internal.h
+++ /dev/null
@@ -1,635 +0,0 @@
-#ifndef HW_IDE_INTERNAL_H
-#define HW_IDE_INTERNAL_H
-
-/*
- * QEMU IDE Emulation -- internal header file
- * only files in hw/ide/ are supposed to include this file.
- * non-internal declarations are in hw/ide.h
- */
-#include <hw/ide.h>
-#include <hw/isa/isa.h>
-#include "sysemu/dma.h"
-#include "sysemu/sysemu.h"
-#include "hw/block/block.h"
-#include "block/scsi.h"
-
-/* debug IDE devices */
-//#define DEBUG_IDE
-//#define DEBUG_IDE_ATAPI
-//#define DEBUG_AIO
-#define USE_DMA_CDROM
-
-typedef struct IDEBus IDEBus;
-typedef struct IDEDevice IDEDevice;
-typedef struct IDEState IDEState;
-typedef struct IDEDMA IDEDMA;
-typedef struct IDEDMAOps IDEDMAOps;
-
-#define TYPE_IDE_BUS "IDE"
-#define IDE_BUS(obj) OBJECT_CHECK(IDEBus, (obj), TYPE_IDE_BUS)
-
-/* Bits of HD_STATUS */
-#define ERR_STAT		0x01
-#define INDEX_STAT		0x02
-#define ECC_STAT		0x04	/* Corrected error */
-#define DRQ_STAT		0x08
-#define SEEK_STAT		0x10
-#define SRV_STAT		0x10
-#define WRERR_STAT		0x20
-#define READY_STAT		0x40
-#define BUSY_STAT		0x80
-
-/* Bits for HD_ERROR */
-#define MARK_ERR		0x01	/* Bad address mark */
-#define TRK0_ERR		0x02	/* couldn't find track 0 */
-#define ABRT_ERR		0x04	/* Command aborted */
-#define MCR_ERR			0x08	/* media change request */
-#define ID_ERR			0x10	/* ID field not found */
-#define MC_ERR			0x20	/* media changed */
-#define ECC_ERR			0x40	/* Uncorrectable ECC error */
-#define BBD_ERR			0x80	/* pre-EIDE meaning:  block marked bad */
-#define ICRC_ERR		0x80	/* new meaning:  CRC error during transfer */
-
-/* Bits of HD_NSECTOR */
-#define CD			0x01
-#define IO			0x02
-#define REL			0x04
-#define TAG_MASK		0xf8
-
-#define IDE_CMD_RESET           0x04
-#define IDE_CMD_DISABLE_IRQ     0x02
-
-/* ACS-2 T13/2015-D Table B.2 Command codes */
-#define WIN_NOP				0x00
-/* reserved                             0x01..0x02 */
-#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
-/* reserved                             0x04..0x05 */
-#define WIN_DSM                         0x06
-/* reserved                             0x07 */
-#define WIN_DEVICE_RESET		0x08
-/* reserved                             0x09..0x0a */
-/* REQUEST SENSE DATA EXT               0x0B */
-/* reserved                             0x0C..0x0F */
-#define WIN_RECAL                       0x10 /* obsolete since ATA4 */
-/* obsolete since ATA3, retired in ATA4 0x11..0x1F */
-#define WIN_READ			0x20 /* 28-Bit */
-#define WIN_READ_ONCE                   0x21 /* 28-Bit w/o retries, obsolete since ATA5 */
-/* obsolete since ATA4                  0x22..0x23 */
-#define WIN_READ_EXT			0x24 /* 48-Bit */
-#define WIN_READDMA_EXT			0x25 /* 48-Bit */
-#define WIN_READDMA_QUEUED_EXT          0x26 /* 48-Bit, obsolete since ACS2 */
-#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
-/* reserved                             0x28 */
-#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
-/* READ STREAM DMA EXT                  0x2A */
-/* READ STREAM EXT                      0x2B */
-/* reserved                             0x2C..0x2E */
-/* READ LOG EXT                         0x2F */
-#define WIN_WRITE			0x30 /* 28-Bit */
-#define WIN_WRITE_ONCE                  0x31 /* 28-Bit w/o retries, obsolete since ATA5 */
-/* obsolete since ATA4                  0x32..0x33 */
-#define WIN_WRITE_EXT			0x34 /* 48-Bit */
-#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
-#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
-#define WIN_SET_MAX_EXT                 0x37 /* 48-Bit, obsolete since ACS2 */
-#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
-#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
-#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
-/* WRITE STREAM DMA EXT                 0x3A */
-/* WRITE STREAM EXT                     0x3B */
-#define WIN_WRITE_VERIFY                0x3C /* 28-Bit, obsolete since ATA4 */
-/* WRITE DMA FUA EXT                    0x3D */
-/* obsolete since ACS2                  0x3E */
-/* WRITE LOG EXT                        0x3F */
-#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
-#define WIN_VERIFY_ONCE                 0x41 /* 28-Bit - w/o retries, obsolete since ATA5 */
-#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
-/* reserved                             0x43..0x44 */
-/* WRITE UNCORRECTABLE EXT              0x45 */
-/* reserved                             0x46 */
-/* READ LOG DMA EXT                     0x47 */
-/* reserved                             0x48..0x4F */
-/* obsolete since ATA4                  0x50 */
-/* CONFIGURE STREAM                     0x51 */
-/* reserved                             0x52..0x56 */
-/* WRITE LOG DMA EXT                    0x57 */
-/* reserved                             0x58..0x5A */
-/* TRUSTED NON DATA                     0x5B */
-/* TRUSTED RECEIVE                      0x5C */
-/* TRUSTED RECEIVE DMA                  0x5D */
-/* TRUSTED SEND                         0x5E */
-/* TRUSTED SEND DMA                     0x5F */
-/* READ FPDMA QUEUED                    0x60 */
-/* WRITE FPDMA QUEUED                   0x61 */
-/* reserved                             0x62->0x6F */
-#define WIN_SEEK                        0x70 /* obsolete since ATA7 */
-/* reserved                             0x71-0x7F */
-/* vendor specific                      0x80-0x86 */
-#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
-/* vendor specific                      0x88-0x8F */
-#define WIN_DIAGNOSE			0x90
-#define WIN_SPECIFY                     0x91 /* set drive geometry translation, obsolete since ATA6 */
-#define WIN_DOWNLOAD_MICROCODE		0x92
-/* DOWNLOAD MICROCODE DMA               0x93 */
-#define WIN_STANDBYNOW2                 0x94 /* retired in ATA4 */
-#define WIN_IDLEIMMEDIATE2              0x95 /* force drive to become "ready", retired in ATA4 */
-#define WIN_STANDBY2                    0x96 /* retired in ATA4 */
-#define WIN_SETIDLE2                    0x97 /* retired in ATA4 */
-#define WIN_CHECKPOWERMODE2             0x98 /* retired in ATA4 */
-#define WIN_SLEEPNOW2                   0x99 /* retired in ATA4 */
-/* vendor specific                      0x9A */
-/* reserved                             0x9B..0x9F */
-#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
-#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
-#define WIN_QUEUED_SERVICE              0xA2 /* obsolete since ACS2 */
-/* reserved                             0xA3..0xAF */
-#define WIN_SMART			0xB0 /* self-monitoring and reporting */
-/* Device Configuration Overlay         0xB1 */
-/* reserved                             0xB2..0xB3 */
-/* Sanitize Device                      0xB4 */
-/* reserved                             0xB5 */
-/* NV Cache                             0xB6 */
-/* reserved for CFA                     0xB7..0xBB */
-#define CFA_ACCESS_METADATA_STORAGE	0xB8
-/* reserved                             0xBC..0xBF */
-#define CFA_ERASE_SECTORS       	0xC0 /* microdrives implement as NOP */
-/* vendor specific                      0xC1..0xC3 */
-#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
-#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
-#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
-#define WIN_READDMA_QUEUED              0xC7 /* read sectors using Queued DMA transfers, obsolete since ACS2 */
-#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
-#define WIN_READDMA_ONCE                0xC9 /* 28-Bit - w/o retries, obsolete since ATA5 */
-#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
-#define WIN_WRITEDMA_ONCE               0xCB /* 28-Bit - w/o retries, obsolete since ATA5 */
-#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */
-#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
-/* WRITE MULTIPLE FUA EXT               0xCE */
-/* reserved                             0xCF..0xDO */
-/* CHECK MEDIA CARD TYPE                0xD1 */
-/* reserved for media card pass through 0xD2..0xD4 */
-/* reserved                             0xD5..0xD9 */
-#define WIN_GETMEDIASTATUS              0xDA /* obsolete since ATA8 */
-/* obsolete since ATA3, retired in ATA4 0xDB..0xDD */
-#define WIN_DOORLOCK                    0xDE /* lock door on removable drives, obsolete since ATA8 */
-#define WIN_DOORUNLOCK                  0xDF /* unlock door on removable drives, obsolete since ATA8 */
-#define WIN_STANDBYNOW1			0xE0
-#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
-#define WIN_STANDBY             	0xE2 /* Set device in Standby Mode */
-#define WIN_SETIDLE1			0xE3
-#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
-#define WIN_CHECKPOWERMODE1		0xE5
-#define WIN_SLEEPNOW1			0xE6
-#define WIN_FLUSH_CACHE			0xE7
-#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
-/* READ BUFFER DMA                      0xE9 */
-#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
-/* WRITE BUFFER DMA                     0xEB */
-#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
-#define WIN_MEDIAEJECT                  0xED /* obsolete since ATA8 */
-/* obsolete since ATA4                  0xEE */
-#define WIN_SETFEATURES			0xEF /* set special drive features */
-#define IBM_SENSE_CONDITION             0xF0 /* measure disk temperature, vendor specific */
-#define WIN_SECURITY_SET_PASS		0xF1
-#define WIN_SECURITY_UNLOCK		0xF2
-#define WIN_SECURITY_ERASE_PREPARE	0xF3
-#define WIN_SECURITY_ERASE_UNIT		0xF4
-#define WIN_SECURITY_FREEZE_LOCK	0xF5
-#define CFA_WEAR_LEVEL                  0xF5 /* microdrives implement as NOP; not specified in T13! */
-#define WIN_SECURITY_DISABLE		0xF6
-/* vendor specific                      0xF7 */
-#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
-#define WIN_SET_MAX			0xF9
-/* vendor specific                      0xFA..0xFF */
-
-/* set to 1 set disable mult support */
-#define MAX_MULT_SECTORS 16
-
-#define IDE_DMA_BUF_SECTORS 256
-
-/* feature values for Data Set Management */
-#define DSM_TRIM                        0x01
-
-#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
-#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
-#endif
-
-/* ATAPI defines */
-
-#define ATAPI_PACKET_SIZE 12
-
-/* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-#define GPCMD_BLANK			    0xa1
-#define GPCMD_CLOSE_TRACK		    0x5b
-#define GPCMD_FLUSH_CACHE		    0x35
-#define GPCMD_FORMAT_UNIT		    0x04
-#define GPCMD_GET_CONFIGURATION		    0x46
-#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define GPCMD_GET_PERFORMANCE		    0xac
-#define GPCMD_INQUIRY			    0x12
-#define GPCMD_LOAD_UNLOAD		    0xa6
-#define GPCMD_MECHANISM_STATUS		    0xbd
-#define GPCMD_MODE_SELECT_10		    0x55
-#define GPCMD_MODE_SENSE_10		    0x5a
-#define GPCMD_PAUSE_RESUME		    0x4b
-#define GPCMD_PLAY_AUDIO_10		    0x45
-#define GPCMD_PLAY_AUDIO_MSF		    0x47
-#define GPCMD_PLAY_AUDIO_TI		    0x48
-#define GPCMD_PLAY_CD			    0xbc
-#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
-#define GPCMD_READ_10			    0x28
-#define GPCMD_READ_12			    0xa8
-#define GPCMD_READ_CDVD_CAPACITY	    0x25
-#define GPCMD_READ_CD			    0xbe
-#define GPCMD_READ_CD_MSF		    0xb9
-#define GPCMD_READ_DISC_INFO		    0x51
-#define GPCMD_READ_DVD_STRUCTURE	    0xad
-#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
-#define GPCMD_READ_HEADER		    0x44
-#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
-#define GPCMD_READ_SUBCHANNEL		    0x42
-#define GPCMD_READ_TOC_PMA_ATIP		    0x43
-#define GPCMD_REPAIR_RZONE_TRACK	    0x58
-#define GPCMD_REPORT_KEY		    0xa4
-#define GPCMD_REQUEST_SENSE		    0x03
-#define GPCMD_RESERVE_RZONE_TRACK	    0x53
-#define GPCMD_SCAN			    0xba
-#define GPCMD_SEEK			    0x2b
-#define GPCMD_SEND_DVD_STRUCTURE	    0xad
-#define GPCMD_SEND_EVENT		    0xa2
-#define GPCMD_SEND_KEY			    0xa3
-#define GPCMD_SEND_OPC			    0x54
-#define GPCMD_SET_READ_AHEAD		    0xa7
-#define GPCMD_SET_STREAMING		    0xb6
-#define GPCMD_START_STOP_UNIT		    0x1b
-#define GPCMD_STOP_PLAY_SCAN		    0x4e
-#define GPCMD_TEST_UNIT_READY		    0x00
-#define GPCMD_VERIFY_10			    0x2f
-#define GPCMD_WRITE_10			    0x2a
-#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
-/* This is listed as optional in ATAPI 2.6, but is (curiously)
- * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
- * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
- * drives support it. */
-#define GPCMD_SET_SPEED			    0xbb
-/* This seems to be a SCSI specific CD-ROM opcode
- * to play data at track/index */
-#define GPCMD_PLAYAUDIO_TI		    0x48
-/*
- * From MS Media Status Notification Support Specification. For
- * older drives only.
- */
-#define GPCMD_GET_MEDIA_STATUS		    0xda
-#define GPCMD_MODE_SENSE_6		    0x1a
-
-#define ATAPI_INT_REASON_CD             0x01 /* 0 = data transfer */
-#define ATAPI_INT_REASON_IO             0x02 /* 1 = transfer to the host */
-#define ATAPI_INT_REASON_REL            0x04
-#define ATAPI_INT_REASON_TAG            0xf8
-
-/* same constants as bochs */
-#define ASC_NO_SEEK_COMPLETE                 0x02
-#define ASC_ILLEGAL_OPCODE                   0x20
-#define ASC_LOGICAL_BLOCK_OOR                0x21
-#define ASC_INV_FIELD_IN_CMD_PACKET          0x24
-#define ASC_MEDIUM_MAY_HAVE_CHANGED          0x28
-#define ASC_INCOMPATIBLE_FORMAT              0x30
-#define ASC_MEDIUM_NOT_PRESENT               0x3a
-#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED  0x39
-#define ASC_DATA_PHASE_ERROR                 0x4b
-#define ASC_MEDIA_REMOVAL_PREVENTED          0x53
-
-#define CFA_NO_ERROR            0x00
-#define CFA_MISC_ERROR          0x09
-#define CFA_INVALID_COMMAND     0x20
-#define CFA_INVALID_ADDRESS     0x21
-#define CFA_ADDRESS_OVERFLOW    0x2f
-
-#define SMART_READ_DATA       0xd0
-#define SMART_READ_THRESH     0xd1
-#define SMART_ATTR_AUTOSAVE   0xd2
-#define SMART_SAVE_ATTR       0xd3
-#define SMART_EXECUTE_OFFLINE 0xd4
-#define SMART_READ_LOG        0xd5
-#define SMART_WRITE_LOG       0xd6
-#define SMART_ENABLE          0xd8
-#define SMART_DISABLE         0xd9
-#define SMART_STATUS          0xda
-
-typedef enum { IDE_HD, IDE_CD, IDE_CFATA } IDEDriveKind;
-
-typedef void EndTransferFunc(IDEState *);
-
-typedef void DMAStartFunc(IDEDMA *, IDEState *, BlockCompletionFunc *);
-typedef void DMAVoidFunc(IDEDMA *);
-typedef int DMAIntFunc(IDEDMA *, int);
-typedef int32_t DMAInt32Func(IDEDMA *, int32_t len);
-typedef void DMAu32Func(IDEDMA *, uint32_t);
-typedef void DMAStopFunc(IDEDMA *, bool);
-typedef void DMARestartFunc(void *, int, RunState);
-
-struct unreported_events {
-    bool eject_request;
-    bool new_media;
-};
-
-enum ide_dma_cmd {
-    IDE_DMA_READ,
-    IDE_DMA_WRITE,
-    IDE_DMA_TRIM,
-    IDE_DMA_ATAPI,
-};
-
-#define ide_cmd_is_read(s) \
-	((s)->dma_cmd == IDE_DMA_READ)
-
-typedef struct IDEBufferedRequest {
-    QLIST_ENTRY(IDEBufferedRequest) list;
-    struct iovec iov;
-    QEMUIOVector qiov;
-    QEMUIOVector *original_qiov;
-    BlockCompletionFunc *original_cb;
-    void *original_opaque;
-    bool orphaned;
-} IDEBufferedRequest;
-
-/* NOTE: IDEState represents in fact one drive */
-struct IDEState {
-    IDEBus *bus;
-    uint8_t unit;
-    /* ide config */
-    IDEDriveKind drive_kind;
-    int cylinders, heads, sectors, chs_trans;
-    int64_t nb_sectors;
-    int mult_sectors;
-    int identify_set;
-    uint8_t identify_data[512];
-    int drive_serial;
-    char drive_serial_str[21];
-    char drive_model_str[41];
-    uint64_t wwn;
-    /* ide regs */
-    uint8_t feature;
-    uint8_t error;
-    uint32_t nsector;
-    uint8_t sector;
-    uint8_t lcyl;
-    uint8_t hcyl;
-    /* other part of tf for lba48 support */
-    uint8_t hob_feature;
-    uint8_t hob_nsector;
-    uint8_t hob_sector;
-    uint8_t hob_lcyl;
-    uint8_t hob_hcyl;
-
-    uint8_t select;
-    uint8_t status;
-
-    /* set for lba48 access */
-    uint8_t lba48;
-    BlockBackend *blk;
-    char version[9];
-    /* ATAPI specific */
-    struct unreported_events events;
-    uint8_t sense_key;
-    uint8_t asc;
-    bool tray_open;
-    bool tray_locked;
-    uint8_t cdrom_changed;
-    int packet_transfer_size;
-    int elementary_transfer_size;
-    int32_t io_buffer_index;
-    int lba;
-    int cd_sector_size;
-    int atapi_dma; /* true if dma is requested for the packet cmd */
-    BlockAcctCookie acct;
-    BlockAIOCB *pio_aiocb;
-    struct iovec iov;
-    QEMUIOVector qiov;
-    QLIST_HEAD(, IDEBufferedRequest) buffered_requests;
-    /* ATA DMA state */
-    uint64_t io_buffer_offset;
-    int32_t io_buffer_size;
-    QEMUSGList sg;
-    /* PIO transfer handling */
-    int req_nb_sectors; /* number of sectors per interrupt */
-    EndTransferFunc *end_transfer_func;
-    uint8_t *data_ptr;
-    uint8_t *data_end;
-    uint8_t *io_buffer;
-    /* PIO save/restore */
-    int32_t io_buffer_total_len;
-    int32_t cur_io_buffer_offset;
-    int32_t cur_io_buffer_len;
-    uint8_t end_transfer_fn_idx;
-    QEMUTimer *sector_write_timer; /* only used for win2k install hack */
-    uint32_t irq_count; /* counts IRQs when using win2k install hack */
-    /* CF-ATA extended error */
-    uint8_t ext_error;
-    /* CF-ATA metadata storage */
-    uint32_t mdata_size;
-    uint8_t *mdata_storage;
-    int media_changed;
-    enum ide_dma_cmd dma_cmd;
-    /* SMART */
-    uint8_t smart_enabled;
-    uint8_t smart_autosave;
-    int smart_errors;
-    uint8_t smart_selftest_count;
-    uint8_t *smart_selftest_data;
-    /* AHCI */
-    int ncq_queues;
-};
-
-struct IDEDMAOps {
-    DMAStartFunc *start_dma;
-    DMAVoidFunc *start_transfer;
-    DMAInt32Func *prepare_buf;
-    DMAu32Func *commit_buf;
-    DMAIntFunc *rw_buf;
-    DMAVoidFunc *restart;
-    DMAVoidFunc *restart_dma;
-    DMAStopFunc *set_inactive;
-    DMAVoidFunc *cmd_done;
-    DMAVoidFunc *reset;
-};
-
-struct IDEDMA {
-    const struct IDEDMAOps *ops;
-    struct iovec iov;
-    QEMUIOVector qiov;
-    BlockAIOCB *aiocb;
-};
-
-struct IDEBus {
-    BusState qbus;
-    IDEDevice *master;
-    IDEDevice *slave;
-    IDEState ifs[2];
-    QEMUBH *bh;
-
-    int bus_id;
-    int max_units;
-    IDEDMA *dma;
-    uint8_t unit;
-    uint8_t cmd;
-    qemu_irq irq;
-
-    int error_status;
-    uint8_t retry_unit;
-    int64_t retry_sector_num;
-    uint32_t retry_nsector;
-};
-
-#define TYPE_IDE_DEVICE "ide-device"
-#define IDE_DEVICE(obj) \
-     OBJECT_CHECK(IDEDevice, (obj), TYPE_IDE_DEVICE)
-#define IDE_DEVICE_CLASS(klass) \
-     OBJECT_CLASS_CHECK(IDEDeviceClass, (klass), TYPE_IDE_DEVICE)
-#define IDE_DEVICE_GET_CLASS(obj) \
-     OBJECT_GET_CLASS(IDEDeviceClass, (obj), TYPE_IDE_DEVICE)
-
-typedef struct IDEDeviceClass {
-    DeviceClass parent_class;
-    int (*init)(IDEDevice *dev);
-} IDEDeviceClass;
-
-struct IDEDevice {
-    DeviceState qdev;
-    uint32_t unit;
-    BlockConf conf;
-    int chs_trans;
-    char *version;
-    char *serial;
-    char *model;
-    uint64_t wwn;
-};
-
-/* These are used for the error_status field of IDEBus */
-#define IDE_RETRY_MASK 0xf8
-#define IDE_RETRY_DMA  0x08
-#define IDE_RETRY_PIO  0x10
-#define IDE_RETRY_ATAPI 0x20 /* reused IDE_RETRY_READ bit */
-#define IDE_RETRY_READ  0x20
-#define IDE_RETRY_FLUSH 0x40
-#define IDE_RETRY_TRIM 0x80
-#define IDE_RETRY_HBA  0x100
-
-#define IS_IDE_RETRY_DMA(_status) \
-    ((_status) & IDE_RETRY_DMA)
-
-#define IS_IDE_RETRY_PIO(_status) \
-    ((_status) & IDE_RETRY_PIO)
-
-/*
- * The method of the IDE_RETRY_ATAPI determination is to use a previously
- * impossible bit combination as a new status value.
- */
-#define IS_IDE_RETRY_ATAPI(_status)   \
-    (((_status) & IDE_RETRY_MASK) == IDE_RETRY_ATAPI)
-
-static inline uint8_t ide_dma_cmd_to_retry(uint8_t dma_cmd)
-{
-    switch (dma_cmd) {
-    case IDE_DMA_READ:
-        return IDE_RETRY_DMA | IDE_RETRY_READ;
-    case IDE_DMA_WRITE:
-        return IDE_RETRY_DMA;
-    case IDE_DMA_TRIM:
-        return IDE_RETRY_DMA | IDE_RETRY_TRIM;
-    case IDE_DMA_ATAPI:
-        return IDE_RETRY_ATAPI;
-    default:
-        break;
-    }
-    return 0;
-}
-
-static inline IDEState *idebus_active_if(IDEBus *bus)
-{
-    return bus->ifs + bus->unit;
-}
-
-static inline void ide_set_irq(IDEBus *bus)
-{
-    if (!(bus->cmd & IDE_CMD_DISABLE_IRQ)) {
-        qemu_irq_raise(bus->irq);
-    }
-}
-
-/* hw/ide/core.c */
-extern const VMStateDescription vmstate_ide_bus;
-
-#define VMSTATE_IDE_BUS(_field, _state)                          \
-    VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)
-
-#define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num)              \
-    VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)
-
-extern const VMStateDescription vmstate_ide_drive;
-
-#define VMSTATE_IDE_DRIVES(_field, _state) \
-    VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)
-
-#define VMSTATE_IDE_DRIVE(_field, _state) \
-    VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_drive, IDEState)
-
-void ide_bus_reset(IDEBus *bus);
-int64_t ide_get_sector(IDEState *s);
-void ide_set_sector(IDEState *s, int64_t sector_num);
-
-void ide_start_dma(IDEState *s, BlockCompletionFunc *cb);
-void dma_buf_commit(IDEState *s, uint32_t tx_bytes);
-void ide_dma_error(IDEState *s);
-void ide_abort_command(IDEState *s);
-
-void ide_atapi_cmd_ok(IDEState *s);
-void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
-void ide_atapi_dma_restart(IDEState *s);
-void ide_atapi_io_error(IDEState *s, int ret);
-
-void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
-uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
-uint32_t ide_status_read(void *opaque, uint32_t addr);
-void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val);
-void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
-uint32_t ide_data_readw(void *opaque, uint32_t addr);
-void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
-uint32_t ide_data_readl(void *opaque, uint32_t addr);
-
-int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind,
-                   const char *version, const char *serial, const char *model,
-                   uint64_t wwn,
-                   uint32_t cylinders, uint32_t heads, uint32_t secs,
-                   int chs_trans);
-void ide_init2(IDEBus *bus, qemu_irq irq);
-void ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
-void ide_register_restart_cb(IDEBus *bus);
-
-void ide_exec_cmd(IDEBus *bus, uint32_t val);
-
-void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
-                        EndTransferFunc *end_transfer_func);
-void ide_transfer_stop(IDEState *s);
-void ide_set_inactive(IDEState *s, bool more);
-BlockAIOCB *ide_issue_trim(BlockBackend *blk,
-        int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
-        BlockCompletionFunc *cb, void *opaque);
-BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num,
-                               QEMUIOVector *iov, int nb_sectors,
-                               BlockCompletionFunc *cb, void *opaque);
-void ide_cancel_dma_sync(IDEState *s);
-
-/* hw/ide/atapi.c */
-void ide_atapi_cmd(IDEState *s);
-void ide_atapi_cmd_reply_end(IDEState *s);
-
-/* hw/ide/qdev.c */
-void ide_bus_new(IDEBus *idebus, size_t idebus_size, DeviceState *dev,
-                 int bus_id, int max_units);
-IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
-
-int ide_handle_rw_error(IDEState *s, int error, int op);
-
-#endif /* HW_IDE_INTERNAL_H */