summaryrefslogtreecommitdiffstats
path: root/qemu/HACKING
diff options
context:
space:
mode:
authorYang Zhang <yang.z.zhang@intel.com>2015-08-28 09:58:54 +0800
committerYang Zhang <yang.z.zhang@intel.com>2015-09-01 12:44:00 +0800
commite44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch)
tree66b09f592c55df2878107a468a91d21506104d3f /qemu/HACKING
parent9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff)
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5 Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/HACKING')
-rw-r--r--qemu/HACKING159
1 files changed, 159 insertions, 0 deletions
diff --git a/qemu/HACKING b/qemu/HACKING
new file mode 100644
index 000000000..12fbc8afe
--- /dev/null
+++ b/qemu/HACKING
@@ -0,0 +1,159 @@
+1. Preprocessor
+
+For variadic macros, stick with this C99-like syntax:
+
+#define DPRINTF(fmt, ...) \
+ do { printf("IRQ: " fmt, ## __VA_ARGS__); } while (0)
+
+2. C types
+
+It should be common sense to use the right type, but we have collected
+a few useful guidelines here.
+
+2.1. Scalars
+
+If you're using "int" or "long", odds are good that there's a better type.
+If a variable is counting something, it should be declared with an
+unsigned type.
+
+If it's host memory-size related, size_t should be a good choice (use
+ssize_t only if required). Guest RAM memory offsets must use ram_addr_t,
+but only for RAM, it may not cover whole guest address space.
+
+If it's file-size related, use off_t.
+If it's file-offset related (i.e., signed), use off_t.
+If it's just counting small numbers use "unsigned int";
+(on all but oddball embedded systems, you can assume that that
+type is at least four bytes wide).
+
+In the event that you require a specific width, use a standard type
+like int32_t, uint32_t, uint64_t, etc. The specific types are
+mandatory for VMState fields.
+
+Don't use Linux kernel internal types like u32, __u32 or __le32.
+
+Use hwaddr for guest physical addresses except pcibus_t
+for PCI addresses. In addition, ram_addr_t is a QEMU internal address
+space that maps guest RAM physical addresses into an intermediate
+address space that can map to host virtual address spaces. Generally
+speaking, the size of guest memory can always fit into ram_addr_t but
+it would not be correct to store an actual guest physical address in a
+ram_addr_t.
+
+For CPU virtual addresses there are several possible types.
+vaddr is the best type to use to hold a CPU virtual address in
+target-independent code. It is guaranteed to be large enough to hold a
+virtual address for any target, and it does not change size from target
+to target. It is always unsigned.
+target_ulong is a type the size of a virtual address on the CPU; this means
+it may be 32 or 64 bits depending on which target is being built. It should
+therefore be used only in target-specific code, and in some
+performance-critical built-per-target core code such as the TLB code.
+There is also a signed version, target_long.
+abi_ulong is for the *-user targets, and represents a type the size of
+'void *' in that target's ABI. (This may not be the same as the size of a
+full CPU virtual address in the case of target ABIs which use 32 bit pointers
+on 64 bit CPUs, like sparc32plus.) Definitions of structures that must match
+the target's ABI must use this type for anything that on the target is defined
+to be an 'unsigned long' or a pointer type.
+There is also a signed version, abi_long.
+
+Of course, take all of the above with a grain of salt. If you're about
+to use some system interface that requires a type like size_t, pid_t or
+off_t, use matching types for any corresponding variables.
+
+Also, if you try to use e.g., "unsigned int" as a type, and that
+conflicts with the signedness of a related variable, sometimes
+it's best just to use the *wrong* type, if "pulling the thread"
+and fixing all related variables would be too invasive.
+
+Finally, while using descriptive types is important, be careful not to
+go overboard. If whatever you're doing causes warnings, or requires
+casts, then reconsider or ask for help.
+
+2.2. Pointers
+
+Ensure that all of your pointers are "const-correct".
+Unless a pointer is used to modify the pointed-to storage,
+give it the "const" attribute. That way, the reader knows
+up-front that this is a read-only pointer. Perhaps more
+importantly, if we're diligent about this, when you see a non-const
+pointer, you're guaranteed that it is used to modify the storage
+it points to, or it is aliased to another pointer that is.
+
+2.3. Typedefs
+Typedefs are used to eliminate the redundant 'struct' keyword.
+
+2.4. Reserved namespaces in C and POSIX
+Underscore capital, double underscore, and underscore 't' suffixes should be
+avoided.
+
+3. Low level memory management
+
+Use of the malloc/free/realloc/calloc/valloc/memalign/posix_memalign
+APIs is not allowed in the QEMU codebase. Instead of these routines,
+use the GLib memory allocation routines g_malloc/g_malloc0/g_new/
+g_new0/g_realloc/g_free or QEMU's qemu_memalign/qemu_blockalign/qemu_vfree
+APIs.
+
+Please note that g_malloc will exit on allocation failure, so there
+is no need to test for failure (as you would have to with malloc).
+Calling g_malloc with a zero size is valid and will return NULL.
+
+Memory allocated by qemu_memalign or qemu_blockalign must be freed with
+qemu_vfree, since breaking this will cause problems on Win32.
+
+4. String manipulation
+
+Do not use the strncpy function. As mentioned in the man page, it does *not*
+guarantee a NULL-terminated buffer, which makes it extremely dangerous to use.
+It also zeros trailing destination bytes out to the specified length. Instead,
+use this similar function when possible, but note its different signature:
+void pstrcpy(char *dest, int dest_buf_size, const char *src)
+
+Don't use strcat because it can't check for buffer overflows, but:
+char *pstrcat(char *buf, int buf_size, const char *s)
+
+The same limitation exists with sprintf and vsprintf, so use snprintf and
+vsnprintf.
+
+QEMU provides other useful string functions:
+int strstart(const char *str, const char *val, const char **ptr)
+int stristart(const char *str, const char *val, const char **ptr)
+int qemu_strnlen(const char *s, int max_len)
+
+There are also replacement character processing macros for isxyz and toxyz,
+so instead of e.g. isalnum you should use qemu_isalnum.
+
+Because of the memory management rules, you must use g_strdup/g_strndup
+instead of plain strdup/strndup.
+
+5. Printf-style functions
+
+Whenever you add a new printf-style function, i.e., one with a format
+string argument and following "..." in its prototype, be sure to use
+gcc's printf attribute directive in the prototype.
+
+This makes it so gcc's -Wformat and -Wformat-security options can do
+their jobs and cross-check format strings with the number and types
+of arguments.
+
+6. C standard, implementation defined and undefined behaviors
+
+C code in QEMU should be written to the C99 language specification. A copy
+of the final version of the C99 standard with corrigenda TC1, TC2, and TC3
+included, formatted as a draft, can be downloaded from:
+ http://www.open-std.org/jtc1/sc22/WG14/www/docs/n1256.pdf
+
+The C language specification defines regions of undefined behavior and
+implementation defined behavior (to give compiler authors enough leeway to
+produce better code). In general, code in QEMU should follow the language
+specification and avoid both undefined and implementation defined
+constructs. ("It works fine on the gcc I tested it with" is not a valid
+argument...) However there are a few areas where we allow ourselves to
+assume certain behaviors because in practice all the platforms we care about
+behave in the same way and writing strictly conformant code would be
+painful. These are:
+ * you may assume that integers are 2s complement representation
+ * you may assume that right shift of a signed integer duplicates
+ the sign bit (ie it is an arithmetic shift, not a logical shift)