These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

4 files changed, 94 insertions, 61 deletions

diff --git a/kernel/drivers/usb/class/cdc-acm.c b/kernel/drivers/usb/class/cdc-acm.c
index a086e1d69..fa4e23930 100644
--- a/kernel/drivers/usb/class/cdc-acm.c
+++ b/kernel/drivers/usb/class/cdc-acm.c
@@ -46,6 +46,7 @@
 #include <linux/usb/cdc.h>
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
+#include <linux/idr.h>
 #include <linux/list.h>
 
 #include "cdc-acm.h"
@@ -56,27 +57,27 @@
 
 static struct usb_driver acm_driver;
 static struct tty_driver *acm_tty_driver;
-static struct acm *acm_table[ACM_TTY_MINORS];
 
-static DEFINE_MUTEX(acm_table_lock);
+static DEFINE_IDR(acm_minors);
+static DEFINE_MUTEX(acm_minors_lock);
 
 static void acm_tty_set_termios(struct tty_struct *tty,
 				struct ktermios *termios_old);
 
 /*
- * acm_table accessors
+ * acm_minors accessors
  */
 
 /*
- * Look up an ACM structure by index. If found and not disconnected, increment
+ * Look up an ACM structure by minor. If found and not disconnected, increment
  * its refcount and return it with its mutex held.
  */
-static struct acm *acm_get_by_index(unsigned index)
+static struct acm *acm_get_by_minor(unsigned int minor)
 {
 	struct acm *acm;
 
-	mutex_lock(&acm_table_lock);
-	acm = acm_table[index];
+	mutex_lock(&acm_minors_lock);
+	acm = idr_find(&acm_minors, minor);
 	if (acm) {
 		mutex_lock(&acm->mutex);
 		if (acm->disconnected) {
@@ -87,7 +88,7 @@ static struct acm *acm_get_by_index(unsigned index)
 			mutex_unlock(&acm->mutex);
 		}
 	}
-	mutex_unlock(&acm_table_lock);
+	mutex_unlock(&acm_minors_lock);
 	return acm;
 }
 
@@ -98,14 +99,9 @@ static int acm_alloc_minor(struct acm *acm)
 {
 	int minor;
 
-	mutex_lock(&acm_table_lock);
-	for (minor = 0; minor < ACM_TTY_MINORS; minor++) {
-		if (!acm_table[minor]) {
-			acm_table[minor] = acm;
-			break;
-		}
-	}
-	mutex_unlock(&acm_table_lock);
+	mutex_lock(&acm_minors_lock);
+	minor = idr_alloc(&acm_minors, acm, 0, ACM_TTY_MINORS, GFP_KERNEL);
+	mutex_unlock(&acm_minors_lock);
 
 	return minor;
 }
@@ -113,9 +109,9 @@ static int acm_alloc_minor(struct acm *acm)
 /* Release the minor number associated with 'acm'.  */
 static void acm_release_minor(struct acm *acm)
 {
-	mutex_lock(&acm_table_lock);
-	acm_table[acm->minor] = NULL;
-	mutex_unlock(&acm_table_lock);
+	mutex_lock(&acm_minors_lock);
+	idr_remove(&acm_minors, acm->minor);
+	mutex_unlock(&acm_minors_lock);
 }
 
 /*
@@ -432,7 +428,8 @@ static void acm_read_bulk_callback(struct urb *urb)
 		set_bit(rb->index, &acm->read_urbs_free);
 		dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n",
 							__func__, status);
-		return;
+		if ((status != -ENOENT) || (urb->actual_length == 0))
+			return;
 	}
 
 	usb_mark_last_busy(acm->dev);
@@ -497,7 +494,7 @@ static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
 
 	dev_dbg(tty->dev, "%s\n", __func__);
 
-	acm = acm_get_by_index(tty->index);
+	acm = acm_get_by_minor(tty->index);
 	if (!acm)
 		return -ENODEV;
 
@@ -1267,12 +1264,9 @@ skip_normal_probe:
 						!= CDC_DATA_INTERFACE_TYPE) {
 		if (control_interface->cur_altsetting->desc.bInterfaceClass
 						== CDC_DATA_INTERFACE_TYPE) {
-			struct usb_interface *t;
 			dev_dbg(&intf->dev,
 				"Your device has switched interfaces.\n");
-			t = control_interface;
-			control_interface = data_interface;
-			data_interface = t;
+			swap(control_interface, data_interface);
 		} else {
 			return -EINVAL;
 		}
@@ -1301,12 +1295,9 @@ skip_normal_probe:
 	/* workaround for switched endpoints */
 	if (!usb_endpoint_dir_in(epread)) {
 		/* descriptors are swapped */
-		struct usb_endpoint_descriptor *t;
 		dev_dbg(&intf->dev,
 			"The data interface has switched endpoints\n");
-		t = epread;
-		epread = epwrite;
-		epwrite = t;
+		swap(epread, epwrite);
 	}
 made_compressed_probe:
 	dev_dbg(&intf->dev, "interfaces are valid\n");
@@ -1316,7 +1307,7 @@ made_compressed_probe:
 		goto alloc_fail;
 
 	minor = acm_alloc_minor(acm);
-	if (minor == ACM_TTY_MINORS) {
+	if (minor < 0) {
 		dev_err(&intf->dev, "no more free acm devices\n");
 		kfree(acm);
 		return -ENODEV;
@@ -1414,6 +1405,8 @@ made_compressed_probe:
 				usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
 				NULL, acm->writesize, acm_write_bulk, snd);
 		snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+		if (quirks & SEND_ZERO_PACKET)
+			snd->urb->transfer_flags |= URB_ZERO_PACKET;
 		snd->instance = acm;
 	}
 
@@ -1848,6 +1841,16 @@ static const struct usb_device_id acm_ids[] = {
 	},
 #endif
 
+	/*Samsung phone in firmware update mode */
+	{ USB_DEVICE(0x04e8, 0x685d),
+	.driver_info = IGNORE_DEVICE,
+	},
+
+	/* Exclude Infineon Flash Loader utility */
+	{ USB_DEVICE(0x058b, 0x0041),
+	.driver_info = IGNORE_DEVICE,
+	},
+
 	/* control interfaces without any protocol set */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_PROTO_NONE) },
@@ -1866,6 +1869,10 @@ static const struct usb_device_id acm_ids[] = {
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_CDMA) },
 
+	{ USB_DEVICE(0x1519, 0x0452), /* Intel 7260 modem */
+	.driver_info = SEND_ZERO_PACKET,
+	},
+
 	{ }
 };
 
@@ -1954,6 +1961,7 @@ static void __exit acm_exit(void)
 	usb_deregister(&acm_driver);
 	tty_unregister_driver(acm_tty_driver);
 	put_tty_driver(acm_tty_driver);
+	idr_destroy(&acm_minors);
 }
 
 module_init(acm_init);
diff --git a/kernel/drivers/usb/class/cdc-acm.h b/kernel/drivers/usb/class/cdc-acm.h
index b3b6c9db6..ccfaba9ab 100644
--- a/kernel/drivers/usb/class/cdc-acm.h
+++ b/kernel/drivers/usb/class/cdc-acm.h
@@ -19,7 +19,7 @@
  */
 
 #define ACM_TTY_MAJOR		166
-#define ACM_TTY_MINORS		32
+#define ACM_TTY_MINORS		256
 
 /*
  * Requests.
@@ -134,3 +134,4 @@ struct acm {
 #define IGNORE_DEVICE			BIT(5)
 #define QUIRK_CONTROL_LINE_STATE	BIT(6)
 #define CLEAR_HALT_CONDITIONS		BIT(7)
+#define SEND_ZERO_PACKET		BIT(8)
diff --git a/kernel/drivers/usb/class/usblp.c b/kernel/drivers/usb/class/usblp.c
index 0924ee40a..071964c78 100644
--- a/kernel/drivers/usb/class/usblp.c
+++ b/kernel/drivers/usb/class/usblp.c
@@ -57,6 +57,7 @@
 #include <linux/mutex.h>
 #undef DEBUG
 #include <linux/usb.h>
+#include <linux/usb/ch9.h>
 #include <linux/ratelimit.h>
 
 /*
@@ -79,12 +80,20 @@
 #define IOCNR_SOFT_RESET		7
 /* Get device_id string: */
 #define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
-/* The following ioctls were added for http://hpoj.sourceforge.net: */
-/* Get two-int array:
- * [0]=current protocol (1=7/1/1, 2=7/1/2, 3=7/1/3),
- * [1]=supported protocol mask (mask&(1<<n)!=0 means 7/1/n supported): */
+/* The following ioctls were added for http://hpoj.sourceforge.net:
+ * Get two-int array:
+ * [0]=current protocol
+ *     (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
+ *         3=USB_CLASS_PRINTER/1/3),
+ * [1]=supported protocol mask (mask&(1<<n)!=0 means
+ *     USB_CLASS_PRINTER/1/n supported):
+ */
 #define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
-/* Set protocol (arg: 1=7/1/1, 2=7/1/2, 3=7/1/3): */
+/*
+ * Set protocol
+ *     (arg: 1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
+ *         3=USB_CLASS_PRINTER/1/3):
+ */
 #define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
 /* Set channel number (HP Vendor-specific command): */
 #define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
@@ -146,8 +155,10 @@ struct usblp {
 	int			readcount;		/* Counter for reads */
 	int			ifnum;			/* Interface number */
 	struct usb_interface	*intf;			/* The interface */
-	/* Alternate-setting numbers and endpoints for each protocol
-	 * (7/1/{index=1,2,3}) that the device supports: */
+	/*
+	 * Alternate-setting numbers and endpoints for each protocol
+	 * (USB_CLASS_PRINTER/1/{index=1,2,3}) that the device supports:
+	 */
 	struct {
 		int				alt_setting;
 		struct usb_endpoint_descriptor	*epwrite;
@@ -660,7 +671,8 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		switch (cmd) {
 
 		case LPGETSTATUS:
-			if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
+			retval = usblp_read_status(usblp, usblp->statusbuf);
+			if (retval) {
 				printk_ratelimited(KERN_ERR "usblp%d:"
 					    "failed reading printer status (%d)\n",
 					    usblp->minor, retval);
@@ -693,9 +705,11 @@ static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length)
 	struct urb *urb;
 	char *writebuf;
 
-	if ((writebuf = kmalloc(transfer_length, GFP_KERNEL)) == NULL)
+	writebuf = kmalloc(transfer_length, GFP_KERNEL);
+	if (writebuf == NULL)
 		return NULL;
-	if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL) {
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (urb == NULL) {
 		kfree(writebuf);
 		return NULL;
 	}
@@ -732,7 +746,8 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t
 			transfer_length = USBLP_BUF_SIZE;
 
 		rv = -ENOMEM;
-		if ((writeurb = usblp_new_writeurb(usblp, transfer_length)) == NULL)
+		writeurb = usblp_new_writeurb(usblp, transfer_length);
+		if (writeurb == NULL)
 			goto raise_urb;
 		usb_anchor_urb(writeurb, &usblp->urbs);
 
@@ -869,11 +884,11 @@ static int usblp_wwait(struct usblp *usblp, int nonblock)
 
 	add_wait_queue(&usblp->wwait, &waita);
 	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
 		if (mutex_lock_interruptible(&usblp->mut)) {
 			rc = -EINTR;
 			break;
 		}
+		set_current_state(TASK_INTERRUPTIBLE);
 		rc = usblp_wtest(usblp, nonblock);
 		mutex_unlock(&usblp->mut);
 		if (rc <= 0)
@@ -980,7 +995,8 @@ static int usblp_submit_read(struct usblp *usblp)
 	int rc;
 
 	rc = -ENOMEM;
-	if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL)
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (urb == NULL)
 		goto raise_urb;
 
 	usb_fill_bulk_urb(urb, usblp->dev,
@@ -1201,19 +1217,23 @@ abort_ret:
  * but our requirements are too intricate for simple match to handle.
  *
  * The "proto_bias" option may be used to specify the preferred protocol
- * for all USB printers (1=7/1/1, 2=7/1/2, 3=7/1/3).  If the device
- * supports the preferred protocol, then we bind to it.
+ * for all USB printers (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
+ * 3=USB_CLASS_PRINTER/1/3).  If the device supports the preferred protocol,
+ * then we bind to it.
  *
- * The best interface for us is 7/1/2, because it is compatible
- * with a stream of characters. If we find it, we bind to it.
+ * The best interface for us is USB_CLASS_PRINTER/1/2, because it
+ * is compatible with a stream of characters. If we find it, we bind to it.
  *
  * Note that the people from hpoj.sourceforge.net need to be able to
- * bind to 7/1/3 (MLC/1284.4), so we provide them ioctls for this purpose.
+ * bind to USB_CLASS_PRINTER/1/3 (MLC/1284.4), so we provide them ioctls
+ * for this purpose.
  *
- * Failing 7/1/2, we look for 7/1/3, even though it's probably not
- * stream-compatible, because this matches the behaviour of the old code.
+ * Failing USB_CLASS_PRINTER/1/2, we look for USB_CLASS_PRINTER/1/3,
+ * even though it's probably not stream-compatible, because this matches
+ * the behaviour of the old code.
  *
- * If nothing else, we bind to 7/1/1 - the unidirectional interface.
+ * If nothing else, we bind to USB_CLASS_PRINTER/1/1
+ * - the unidirectional interface.
  */
 static int usblp_select_alts(struct usblp *usblp)
 {
@@ -1231,7 +1251,8 @@ static int usblp_select_alts(struct usblp *usblp)
 	for (i = 0; i < if_alt->num_altsetting; i++) {
 		ifd = &if_alt->altsetting[i];
 
-		if (ifd->desc.bInterfaceClass != 7 || ifd->desc.bInterfaceSubClass != 1)
+		if (ifd->desc.bInterfaceClass != USB_CLASS_PRINTER ||
+		    ifd->desc.bInterfaceSubClass != 1)
 			if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS))
 				continue;
 
@@ -1257,8 +1278,10 @@ static int usblp_select_alts(struct usblp *usblp)
 		if (!epwrite || (ifd->desc.bInterfaceProtocol > 1 && !epread))
 			continue;
 
-		/* Turn off reads for 7/1/1 (unidirectional) interfaces
-		 * and buggy bidirectional printers. */
+		/*
+		 * Turn off reads for USB_CLASS_PRINTER/1/1 (unidirectional)
+		 * interfaces and buggy bidirectional printers.
+		 */
 		if (ifd->desc.bInterfaceProtocol == 1) {
 			epread = NULL;
 		} else if (usblp->quirks & USBLP_QUIRK_BIDIR) {
@@ -1401,12 +1424,12 @@ static int usblp_resume(struct usb_interface *intf)
 }
 
 static const struct usb_device_id usblp_ids[] = {
-	{ USB_DEVICE_INFO(7, 1, 1) },
-	{ USB_DEVICE_INFO(7, 1, 2) },
-	{ USB_DEVICE_INFO(7, 1, 3) },
-	{ USB_INTERFACE_INFO(7, 1, 1) },
-	{ USB_INTERFACE_INFO(7, 1, 2) },
-	{ USB_INTERFACE_INFO(7, 1, 3) },
+	{ USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 1) },
+	{ USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 2) },
+	{ USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 3) },
+	{ USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 1) },
+	{ USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 2) },
+	{ USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 3) },
 	{ USB_DEVICE(0x04b8, 0x0202) },	/* Seiko Epson Receipt Printer M129C */
 	{ }						/* Terminating entry */
 };
diff --git a/kernel/drivers/usb/class/usbtmc.c b/kernel/drivers/usb/class/usbtmc.c
index 960bc0891..7a11a8263 100644
--- a/kernel/drivers/usb/class/usbtmc.c
+++ b/kernel/drivers/usb/class/usbtmc.c
@@ -109,6 +109,7 @@ struct usbtmc_ID_rigol_quirk {
 
 static const struct usbtmc_ID_rigol_quirk usbtmc_id_quirk[] = {
 	{ 0x1ab1, 0x0588 },
+	{ 0x1ab1, 0x04b0 },
 	{ 0, 0 }
 };