These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 44 insertions, 13 deletions

diff --git a/kernel/drivers/thermal/of-thermal.c b/kernel/drivers/thermal/of-thermal.c
index 668fb1bde..be4eedcb8 100644
--- a/kernel/drivers/thermal/of-thermal.c
+++ b/kernel/drivers/thermal/of-thermal.c
@@ -58,6 +58,8 @@ struct __thermal_bind_params {
  * @mode: current thermal zone device mode (enabled/disabled)
  * @passive_delay: polling interval while passive cooling is activated
  * @polling_delay: zone polling interval
+ * @slope: slope of the temperature adjustment curve
+ * @offset: offset of the temperature adjustment curve
  * @ntrips: number of trip points
  * @trips: an array of trip points (0..ntrips - 1)
  * @num_tbps: number of thermal bind params
@@ -70,6 +72,8 @@ struct __thermal_zone {
 	enum thermal_device_mode mode;
 	int passive_delay;
 	int polling_delay;
+	int slope;
+	int offset;
 
 	/* trip data */
 	int ntrips;
@@ -87,7 +91,7 @@ struct __thermal_zone {
 /***   DT thermal zone device callbacks   ***/
 
 static int of_thermal_get_temp(struct thermal_zone_device *tz,
-			       unsigned long *temp)
+			       int *temp)
 {
 	struct __thermal_zone *data = tz->devdata;
 
@@ -173,7 +177,7 @@ EXPORT_SYMBOL_GPL(of_thermal_get_trip_points);
  * Return: zero on success, error code otherwise
  */
 static int of_thermal_set_emul_temp(struct thermal_zone_device *tz,
-				    unsigned long temp)
+				    int temp)
 {
 	struct __thermal_zone *data = tz->devdata;
 
@@ -227,7 +231,8 @@ static int of_thermal_bind(struct thermal_zone_device *thermal,
 			ret = thermal_zone_bind_cooling_device(thermal,
 						tbp->trip_id, cdev,
 						tbp->max,
-						tbp->min);
+						tbp->min,
+						tbp->usage);
 			if (ret)
 				return ret;
 		}
@@ -306,7 +311,7 @@ static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
 }
 
 static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
-				    unsigned long *temp)
+				    int *temp)
 {
 	struct __thermal_zone *data = tz->devdata;
 
@@ -319,7 +324,7 @@ static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
 }
 
 static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
-				    unsigned long temp)
+				    int temp)
 {
 	struct __thermal_zone *data = tz->devdata;
 
@@ -333,7 +338,7 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
 }
 
 static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip,
-				    unsigned long *hyst)
+				    int *hyst)
 {
 	struct __thermal_zone *data = tz->devdata;
 
@@ -346,7 +351,7 @@ static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip,
 }
 
 static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
-				    unsigned long hyst)
+				    int hyst)
 {
 	struct __thermal_zone *data = tz->devdata;
 
@@ -360,7 +365,7 @@ static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
 }
 
 static int of_thermal_get_crit_temp(struct thermal_zone_device *tz,
-				    unsigned long *temp)
+				    int *temp)
 {
 	struct __thermal_zone *data = tz->devdata;
 	int i;
@@ -581,7 +586,7 @@ static int thermal_of_populate_bind_params(struct device_node *np,
 	u32 prop;
 
 	/* Default weight. Usage is optional */
-	__tbp->usage = 0;
+	__tbp->usage = THERMAL_WEIGHT_DEFAULT;
 	ret = of_property_read_u32(np, "contribution", &prop);
 	if (ret == 0)
 		__tbp->usage = prop;
@@ -715,7 +720,7 @@ static int thermal_of_populate_trip(struct device_node *np,
  * @np parameter and fills the read data into a __thermal_zone data structure
  * and return this pointer.
  *
- * TODO: Missing properties to parse: thermal-sensor-names and coefficients
+ * TODO: Missing properties to parse: thermal-sensor-names
  *
  * Return: On success returns a valid struct __thermal_zone,
  * otherwise, it returns a corresponding ERR_PTR(). Caller must
@@ -727,7 +732,7 @@ thermal_of_build_thermal_zone(struct device_node *np)
 	struct device_node *child = NULL, *gchild;
 	struct __thermal_zone *tz;
 	int ret, i;
-	u32 prop;
+	u32 prop, coef[2];
 
 	if (!np) {
 		pr_err("no thermal zone np\n");
@@ -752,6 +757,20 @@ thermal_of_build_thermal_zone(struct device_node *np)
 	}
 	tz->polling_delay = prop;
 
+	/*
+	 * REVIST: for now, the thermal framework supports only
+	 * one sensor per thermal zone. Thus, we are considering
+	 * only the first two values as slope and offset.
+	 */
+	ret = of_property_read_u32_array(np, "coefficients", coef, 2);
+	if (ret == 0) {
+		tz->slope = coef[0];
+		tz->offset = coef[1];
+	} else {
+		tz->slope = 1;
+		tz->offset = 0;
+	}
+
 	/* trips */
 	child = of_get_child_by_name(np, "trips");
 
@@ -865,6 +884,8 @@ int __init of_parse_thermal_zones(void)
 	for_each_child_of_node(np, child) {
 		struct thermal_zone_device *zone;
 		struct thermal_zone_params *tzp;
+		int i, mask = 0;
+		u32 prop;
 
 		/* Check whether child is enabled or not */
 		if (!of_device_is_available(child))
@@ -891,8 +912,18 @@ int __init of_parse_thermal_zones(void)
 		/* No hwmon because there might be hwmon drivers registering */
 		tzp->no_hwmon = true;
 
+		if (!of_property_read_u32(child, "sustainable-power", &prop))
+			tzp->sustainable_power = prop;
+
+		for (i = 0; i < tz->ntrips; i++)
+			mask |= 1 << i;
+
+		/* these two are left for temperature drivers to use */
+		tzp->slope = tz->slope;
+		tzp->offset = tz->offset;
+
 		zone = thermal_zone_device_register(child->name, tz->ntrips,
-						    0, tz,
+						    mask, tz,
 						    ops, tzp,
 						    tz->passive_delay,
 						    tz->polling_delay);
@@ -933,7 +964,7 @@ void of_thermal_destroy_zones(void)
 
 	np = of_find_node_by_name(NULL, "thermal-zones");
 	if (!np) {
-		pr_err("unable to find thermal zones\n");
+		pr_debug("unable to find thermal zones\n");
 		return;
 	}