Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 239 insertions, 0 deletions

diff --git a/kernel/drivers/staging/sm750fb/ddk750_power.c b/kernel/drivers/staging/sm750fb/ddk750_power.c
new file mode 100644
index 000000000..cbb97676b
--- /dev/null
+++ b/kernel/drivers/staging/sm750fb/ddk750_power.c
@@ -0,0 +1,239 @@
+#include "ddk750_help.h"
+#include "ddk750_reg.h"
+#include "ddk750_power.h"
+
+void ddk750_setDPMS(DPMS_t state)
+{
+	unsigned int value;
+	if(getChipType() == SM750LE){
+		value = PEEK32(CRT_DISPLAY_CTRL);
+		POKE32(CRT_DISPLAY_CTRL,FIELD_VALUE(value,CRT_DISPLAY_CTRL,DPMS,state));
+	}else{
+		value = PEEK32(SYSTEM_CTRL);
+		value= FIELD_VALUE(value,SYSTEM_CTRL,DPMS,state);
+		POKE32(SYSTEM_CTRL, value);
+	}
+}
+
+unsigned int getPowerMode(void)
+{
+	if(getChipType() == SM750LE)
+		return 0;
+    return (FIELD_GET(PEEK32(POWER_MODE_CTRL), POWER_MODE_CTRL, MODE));
+}
+
+
+/*
+ * SM50x can operate in one of three modes: 0, 1 or Sleep.
+ * On hardware reset, power mode 0 is default.
+ */
+void setPowerMode(unsigned int powerMode)
+{
+    unsigned int control_value = 0;
+
+    control_value = PEEK32(POWER_MODE_CTRL);
+
+	if(getChipType() == SM750LE)
+		return;
+
+    switch (powerMode)
+    {
+        case POWER_MODE_CTRL_MODE_MODE0:
+            control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, MODE0);
+            break;
+
+        case POWER_MODE_CTRL_MODE_MODE1:
+            control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, MODE1);
+            break;
+
+        case POWER_MODE_CTRL_MODE_SLEEP:
+            control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, SLEEP);
+            break;
+
+        default:
+            break;
+    }
+
+    /* Set up other fields in Power Control Register */
+    if (powerMode == POWER_MODE_CTRL_MODE_SLEEP)
+    {
+        control_value =
+#ifdef VALIDATION_CHIP
+            FIELD_SET(  control_value, POWER_MODE_CTRL, 336CLK, OFF) |
+#endif
+            FIELD_SET(  control_value, POWER_MODE_CTRL, OSC_INPUT,  OFF);
+    }
+    else
+    {
+        control_value =
+#ifdef VALIDATION_CHIP
+            FIELD_SET(  control_value, POWER_MODE_CTRL, 336CLK, ON) |
+#endif
+            FIELD_SET(  control_value, POWER_MODE_CTRL, OSC_INPUT,  ON);
+    }
+
+    /* Program new power mode. */
+    POKE32(POWER_MODE_CTRL, control_value);
+}
+
+void setCurrentGate(unsigned int gate)
+{
+    unsigned int gate_reg;
+    unsigned int mode;
+
+    /* Get current power mode. */
+    mode = getPowerMode();
+
+    switch (mode)
+    {
+        case POWER_MODE_CTRL_MODE_MODE0:
+            gate_reg = MODE0_GATE;
+            break;
+
+        case POWER_MODE_CTRL_MODE_MODE1:
+            gate_reg = MODE1_GATE;
+            break;
+
+        default:
+            gate_reg = MODE0_GATE;
+            break;
+    }
+    POKE32(gate_reg, gate);
+}
+
+
+
+/*
+ * This function enable/disable the 2D engine.
+ */
+void enable2DEngine(unsigned int enable)
+{
+    uint32_t gate;
+
+    gate = PEEK32(CURRENT_GATE);
+    if (enable)
+    {
+        gate = FIELD_SET(gate, CURRENT_GATE, DE,  ON);
+        gate = FIELD_SET(gate, CURRENT_GATE, CSC, ON);
+    }
+    else
+    {
+        gate = FIELD_SET(gate, CURRENT_GATE, DE,  OFF);
+        gate = FIELD_SET(gate, CURRENT_GATE, CSC, OFF);
+    }
+
+    setCurrentGate(gate);
+}
+
+
+/*
+ * This function enable/disable the ZV Port.
+ */
+void enableZVPort(unsigned int enable)
+{
+    uint32_t gate;
+
+    /* Enable ZV Port Gate */
+    gate = PEEK32(CURRENT_GATE);
+    if (enable)
+    {
+        gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, ON);
+#if 1
+        /* Using Software I2C */
+        gate = FIELD_SET(gate, CURRENT_GATE, GPIO, ON);
+#else
+        /* Using Hardware I2C */
+        gate = FIELD_SET(gate, CURRENT_GATE, I2C,    ON);
+#endif
+    }
+    else
+    {
+        /* Disable ZV Port Gate. There is no way to know whether the GPIO pins are being used
+           or not. Therefore, do not disable the GPIO gate. */
+        gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, OFF);
+    }
+
+    setCurrentGate(gate);
+}
+
+
+void enableSSP(unsigned int enable)
+{
+    uint32_t gate;
+
+    /* Enable SSP Gate */
+    gate = PEEK32(CURRENT_GATE);
+    if (enable)
+        gate = FIELD_SET(gate, CURRENT_GATE, SSP, ON);
+    else
+        gate = FIELD_SET(gate, CURRENT_GATE, SSP, OFF);
+
+    setCurrentGate(gate);
+}
+
+void enableDMA(unsigned int enable)
+{
+    uint32_t gate;
+
+    /* Enable DMA Gate */
+    gate = PEEK32(CURRENT_GATE);
+    if (enable)
+        gate = FIELD_SET(gate, CURRENT_GATE, DMA, ON);
+    else
+        gate = FIELD_SET(gate, CURRENT_GATE, DMA, OFF);
+
+    setCurrentGate(gate);
+}
+
+/*
+ * This function enable/disable the GPIO Engine
+ */
+void enableGPIO(unsigned int enable)
+{
+    uint32_t gate;
+
+    /* Enable GPIO Gate */
+    gate = PEEK32(CURRENT_GATE);
+    if (enable)
+        gate = FIELD_SET(gate, CURRENT_GATE, GPIO, ON);
+    else
+        gate = FIELD_SET(gate, CURRENT_GATE, GPIO, OFF);
+
+    setCurrentGate(gate);
+}
+
+/*
+ * This function enable/disable the PWM Engine
+ */
+void enablePWM(unsigned int enable)
+{
+    uint32_t gate;
+
+    /* Enable PWM Gate */
+    gate = PEEK32(CURRENT_GATE);
+    if (enable)
+        gate = FIELD_SET(gate, CURRENT_GATE, PWM, ON);
+    else
+        gate = FIELD_SET(gate, CURRENT_GATE, PWM, OFF);
+
+    setCurrentGate(gate);
+}
+
+/*
+ * This function enable/disable the I2C Engine
+ */
+void enableI2C(unsigned int enable)
+{
+    uint32_t gate;
+
+    /* Enable I2C Gate */
+    gate = PEEK32(CURRENT_GATE);
+    if (enable)
+        gate = FIELD_SET(gate, CURRENT_GATE, I2C, ON);
+    else
+        gate = FIELD_SET(gate, CURRENT_GATE, I2C, OFF);
+
+    setCurrentGate(gate);
+}
+
+