Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 107 insertions, 0 deletions

diff --git a/kernel/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/kernel/drivers/staging/iio/Documentation/sysfs-bus-iio-light
new file mode 100644
index 000000000..17e5c9c51
--- /dev/null
+++ b/kernel/drivers/staging/iio/Documentation/sysfs-bus-iio-light
@@ -0,0 +1,107 @@
+
+What:		/sys/bus/iio/devices/device[n]/range
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware dependent ADC Full Scale Range used for some ambient
+		light sensors in calculating lux.
+
+What:		/sys/bus/iio/devices/device[n]/range_available
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware dependent supported vales for ADC Full Scale Range.
+
+What:		/sys/bus/iio/devices/device[n]/adc_resolution
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware dependent ADC resolution of the ambient light sensor
+		used in calculating the lux.
+
+What:		/sys/bus/iio/devices/device[n]/adc_resolution_available
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware dependent list of possible values supported for the
+		adc_resolution of the given sensor.
+
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0[_input|_raw]
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This should return the calculated lux from the light sensor. If
+		it comes back in SI units, it should also include _input else it
+		should include _raw to signify it is not in SI units.
+
+What:		/sys/.../device[n]/proximity_on_chip_ambient_infrared_suppression
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware dependent mode for an ALS device to calculate the value
+		in proximity mode. When this is enabled, then the device should
+		use a infrared sensor reading to remove infrared noise from the
+		proximity reading. If this is not enabled, the driver can still
+		do this calculation manually by reading the infrared sensor
+		value and doing the negation in sw.
+
+What:		/sys/bus/iio/devices/device[n]/in_proximity[_input|_raw]
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This property is supported by proximity sensors and should be
+		used to return the value of a reading by the sensor. If this
+		value is returned in SI units, it should also include _input
+		but if it is not, then it should include _raw.
+
+What:		/sys/bus/iio/devices/device[n]/intensity_infrared[_input|_raw]
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This property is supported by sensors that have an infrared
+		sensing mode. This value should be the output from a reading
+		and if expressed in SI units, should include _input. If this
+		value is not in SI units, then it should include _raw.
+
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_target
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This property gets/sets the last known external
+		lux measurement used in/for calibration.
+
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_integration_time
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This property gets/sets the sensors ADC analog integration time.
+
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_lux_table
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This property gets/sets the table of coefficients
+		used in calculating illuminance in lux.
+
+What:		/sys/bus/iio/devices/device[n]/in_intensity_clear[_input|_raw]
+What:		/sys/bus/iio/devices/device[n]/in_intensity_red[_input|_raw]
+What:		/sys/bus/iio/devices/device[n]/in_intensity_green[_input|_raw]
+What:		/sys/bus/iio/devices/device[n]/in_intensity_blue[_input|_raw]
+KernelVersion:	3.6.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This property is supported by sensors that have a RGBC
+		sensing mode. This value should be the output from a reading
+		and if expressed in SI units, should include _input. If this
+		value is not in SI units (irradiance, uW/mm^2), then it should
+		include _raw.
+
+What:		/sys/bus/iio/devices/device[n]/in_cct0[_input|_raw]
+KernelVersion:	3.6.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This should return the correlated color temperature from the
+		light sensor. If it comes back in SI units, it should also
+		include _input else it should include _raw to signify it is not
+		in SI units.
+