summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/spi/spi-dw.c
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/spi/spi-dw.c
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/spi/spi-dw.c')
-rw-r--r--kernel/drivers/spi/spi-dw.c623
1 files changed, 623 insertions, 0 deletions
diff --git a/kernel/drivers/spi/spi-dw.c b/kernel/drivers/spi/spi-dw.c
new file mode 100644
index 000000000..8d67d03c7
--- /dev/null
+++ b/kernel/drivers/spi/spi-dw.c
@@ -0,0 +1,623 @@
+/*
+ * Designware SPI core controller driver (refer pxa2xx_spi.c)
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
+
+#include "spi-dw.h"
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#endif
+
+/* Slave spi_dev related */
+struct chip_data {
+ u16 cr0;
+ u8 cs; /* chip select pin */
+ u8 n_bytes; /* current is a 1/2/4 byte op */
+ u8 tmode; /* TR/TO/RO/EEPROM */
+ u8 type; /* SPI/SSP/MicroWire */
+
+ u8 poll_mode; /* 1 means use poll mode */
+
+ u32 dma_width;
+ u32 rx_threshold;
+ u32 tx_threshold;
+ u8 enable_dma;
+ u8 bits_per_word;
+ u16 clk_div; /* baud rate divider */
+ u32 speed_hz; /* baud rate */
+ void (*cs_control)(u32 command);
+};
+
+#ifdef CONFIG_DEBUG_FS
+#define SPI_REGS_BUFSIZE 1024
+static ssize_t dw_spi_show_regs(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct dw_spi *dws = file->private_data;
+ char *buf;
+ u32 len = 0;
+ ssize_t ret;
+
+ buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL);
+ if (!buf)
+ return 0;
+
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "%s registers:\n", dev_name(&dws->master->dev));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "=================================\n");
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "CTRL0: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL0));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "CTRL1: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL1));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "SSIENR: \t0x%08x\n", dw_readl(dws, DW_SPI_SSIENR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "SER: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SER));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "BAUDR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_BAUDR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "TXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_TXFLTR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "RXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_RXFLTR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "TXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_TXFLR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "RXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_RXFLR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "SR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "IMR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_IMR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "ISR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_ISR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "DMACR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_DMACR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "DMATDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMATDLR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "DMARDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMARDLR));
+ len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+ "=================================\n");
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations dw_spi_regs_ops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = dw_spi_show_regs,
+ .llseek = default_llseek,
+};
+
+static int dw_spi_debugfs_init(struct dw_spi *dws)
+{
+ dws->debugfs = debugfs_create_dir("dw_spi", NULL);
+ if (!dws->debugfs)
+ return -ENOMEM;
+
+ debugfs_create_file("registers", S_IFREG | S_IRUGO,
+ dws->debugfs, (void *)dws, &dw_spi_regs_ops);
+ return 0;
+}
+
+static void dw_spi_debugfs_remove(struct dw_spi *dws)
+{
+ debugfs_remove_recursive(dws->debugfs);
+}
+
+#else
+static inline int dw_spi_debugfs_init(struct dw_spi *dws)
+{
+ return 0;
+}
+
+static inline void dw_spi_debugfs_remove(struct dw_spi *dws)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static void dw_spi_set_cs(struct spi_device *spi, bool enable)
+{
+ struct dw_spi *dws = spi_master_get_devdata(spi->master);
+ struct chip_data *chip = spi_get_ctldata(spi);
+
+ /* Chip select logic is inverted from spi_set_cs() */
+ if (chip && chip->cs_control)
+ chip->cs_control(!enable);
+
+ if (!enable)
+ dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
+}
+
+/* Return the max entries we can fill into tx fifo */
+static inline u32 tx_max(struct dw_spi *dws)
+{
+ u32 tx_left, tx_room, rxtx_gap;
+
+ tx_left = (dws->tx_end - dws->tx) / dws->n_bytes;
+ tx_room = dws->fifo_len - dw_readl(dws, DW_SPI_TXFLR);
+
+ /*
+ * Another concern is about the tx/rx mismatch, we
+ * though to use (dws->fifo_len - rxflr - txflr) as
+ * one maximum value for tx, but it doesn't cover the
+ * data which is out of tx/rx fifo and inside the
+ * shift registers. So a control from sw point of
+ * view is taken.
+ */
+ rxtx_gap = ((dws->rx_end - dws->rx) - (dws->tx_end - dws->tx))
+ / dws->n_bytes;
+
+ return min3(tx_left, tx_room, (u32) (dws->fifo_len - rxtx_gap));
+}
+
+/* Return the max entries we should read out of rx fifo */
+static inline u32 rx_max(struct dw_spi *dws)
+{
+ u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes;
+
+ return min_t(u32, rx_left, dw_readl(dws, DW_SPI_RXFLR));
+}
+
+static void dw_writer(struct dw_spi *dws)
+{
+ u32 max = tx_max(dws);
+ u16 txw = 0;
+
+ while (max--) {
+ /* Set the tx word if the transfer's original "tx" is not null */
+ if (dws->tx_end - dws->len) {
+ if (dws->n_bytes == 1)
+ txw = *(u8 *)(dws->tx);
+ else
+ txw = *(u16 *)(dws->tx);
+ }
+ dw_writel(dws, DW_SPI_DR, txw);
+ dws->tx += dws->n_bytes;
+ }
+}
+
+static void dw_reader(struct dw_spi *dws)
+{
+ u32 max = rx_max(dws);
+ u16 rxw;
+
+ while (max--) {
+ rxw = dw_readl(dws, DW_SPI_DR);
+ /* Care rx only if the transfer's original "rx" is not null */
+ if (dws->rx_end - dws->len) {
+ if (dws->n_bytes == 1)
+ *(u8 *)(dws->rx) = rxw;
+ else
+ *(u16 *)(dws->rx) = rxw;
+ }
+ dws->rx += dws->n_bytes;
+ }
+}
+
+static void int_error_stop(struct dw_spi *dws, const char *msg)
+{
+ spi_reset_chip(dws);
+
+ dev_err(&dws->master->dev, "%s\n", msg);
+ dws->master->cur_msg->status = -EIO;
+ spi_finalize_current_transfer(dws->master);
+}
+
+static irqreturn_t interrupt_transfer(struct dw_spi *dws)
+{
+ u16 irq_status = dw_readl(dws, DW_SPI_ISR);
+
+ /* Error handling */
+ if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) {
+ dw_readl(dws, DW_SPI_ICR);
+ int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun");
+ return IRQ_HANDLED;
+ }
+
+ dw_reader(dws);
+ if (dws->rx_end == dws->rx) {
+ spi_mask_intr(dws, SPI_INT_TXEI);
+ spi_finalize_current_transfer(dws->master);
+ return IRQ_HANDLED;
+ }
+ if (irq_status & SPI_INT_TXEI) {
+ spi_mask_intr(dws, SPI_INT_TXEI);
+ dw_writer(dws);
+ /* Enable TX irq always, it will be disabled when RX finished */
+ spi_umask_intr(dws, SPI_INT_TXEI);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dw_spi_irq(int irq, void *dev_id)
+{
+ struct spi_master *master = dev_id;
+ struct dw_spi *dws = spi_master_get_devdata(master);
+ u16 irq_status = dw_readl(dws, DW_SPI_ISR) & 0x3f;
+
+ if (!irq_status)
+ return IRQ_NONE;
+
+ if (!master->cur_msg) {
+ spi_mask_intr(dws, SPI_INT_TXEI);
+ return IRQ_HANDLED;
+ }
+
+ return dws->transfer_handler(dws);
+}
+
+/* Must be called inside pump_transfers() */
+static int poll_transfer(struct dw_spi *dws)
+{
+ do {
+ dw_writer(dws);
+ dw_reader(dws);
+ cpu_relax();
+ } while (dws->rx_end > dws->rx);
+
+ return 0;
+}
+
+static int dw_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi, struct spi_transfer *transfer)
+{
+ struct dw_spi *dws = spi_master_get_devdata(master);
+ struct chip_data *chip = spi_get_ctldata(spi);
+ u8 imask = 0;
+ u16 txlevel = 0;
+ u16 clk_div = 0;
+ u32 speed = 0;
+ u32 cr0 = 0;
+ int ret;
+
+ dws->dma_mapped = 0;
+ dws->n_bytes = chip->n_bytes;
+ dws->dma_width = chip->dma_width;
+
+ dws->tx = (void *)transfer->tx_buf;
+ dws->tx_end = dws->tx + transfer->len;
+ dws->rx = transfer->rx_buf;
+ dws->rx_end = dws->rx + transfer->len;
+ dws->len = transfer->len;
+
+ spi_enable_chip(dws, 0);
+
+ cr0 = chip->cr0;
+
+ /* Handle per transfer options for bpw and speed */
+ if (transfer->speed_hz) {
+ speed = chip->speed_hz;
+
+ if ((transfer->speed_hz != speed) || !chip->clk_div) {
+ speed = transfer->speed_hz;
+
+ /* clk_div doesn't support odd number */
+ clk_div = (dws->max_freq / speed + 1) & 0xfffe;
+
+ chip->speed_hz = speed;
+ chip->clk_div = clk_div;
+
+ spi_set_clk(dws, chip->clk_div);
+ }
+ }
+ if (transfer->bits_per_word) {
+ if (transfer->bits_per_word == 8) {
+ dws->n_bytes = 1;
+ dws->dma_width = 1;
+ } else if (transfer->bits_per_word == 16) {
+ dws->n_bytes = 2;
+ dws->dma_width = 2;
+ }
+ cr0 = (transfer->bits_per_word - 1)
+ | (chip->type << SPI_FRF_OFFSET)
+ | (spi->mode << SPI_MODE_OFFSET)
+ | (chip->tmode << SPI_TMOD_OFFSET);
+ }
+
+ /*
+ * Adjust transfer mode if necessary. Requires platform dependent
+ * chipselect mechanism.
+ */
+ if (chip->cs_control) {
+ if (dws->rx && dws->tx)
+ chip->tmode = SPI_TMOD_TR;
+ else if (dws->rx)
+ chip->tmode = SPI_TMOD_RO;
+ else
+ chip->tmode = SPI_TMOD_TO;
+
+ cr0 &= ~SPI_TMOD_MASK;
+ cr0 |= (chip->tmode << SPI_TMOD_OFFSET);
+ }
+
+ dw_writel(dws, DW_SPI_CTRL0, cr0);
+
+ /* Check if current transfer is a DMA transaction */
+ if (master->can_dma && master->can_dma(master, spi, transfer))
+ dws->dma_mapped = master->cur_msg_mapped;
+
+ /* For poll mode just disable all interrupts */
+ spi_mask_intr(dws, 0xff);
+
+ /*
+ * Interrupt mode
+ * we only need set the TXEI IRQ, as TX/RX always happen syncronizely
+ */
+ if (dws->dma_mapped) {
+ ret = dws->dma_ops->dma_setup(dws, transfer);
+ if (ret < 0) {
+ spi_enable_chip(dws, 1);
+ return ret;
+ }
+ } else if (!chip->poll_mode) {
+ txlevel = min_t(u16, dws->fifo_len / 2, dws->len / dws->n_bytes);
+ dw_writel(dws, DW_SPI_TXFLTR, txlevel);
+
+ /* Set the interrupt mask */
+ imask |= SPI_INT_TXEI | SPI_INT_TXOI |
+ SPI_INT_RXUI | SPI_INT_RXOI;
+ spi_umask_intr(dws, imask);
+
+ dws->transfer_handler = interrupt_transfer;
+ }
+
+ spi_enable_chip(dws, 1);
+
+ if (dws->dma_mapped) {
+ ret = dws->dma_ops->dma_transfer(dws, transfer);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (chip->poll_mode)
+ return poll_transfer(dws);
+
+ return 1;
+}
+
+static void dw_spi_handle_err(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct dw_spi *dws = spi_master_get_devdata(master);
+
+ if (dws->dma_mapped)
+ dws->dma_ops->dma_stop(dws);
+
+ spi_reset_chip(dws);
+}
+
+/* This may be called twice for each spi dev */
+static int dw_spi_setup(struct spi_device *spi)
+{
+ struct dw_spi_chip *chip_info = NULL;
+ struct chip_data *chip;
+ int ret;
+
+ /* Only alloc on first setup */
+ chip = spi_get_ctldata(spi);
+ if (!chip) {
+ chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+ spi_set_ctldata(spi, chip);
+ }
+
+ /*
+ * Protocol drivers may change the chip settings, so...
+ * if chip_info exists, use it
+ */
+ chip_info = spi->controller_data;
+
+ /* chip_info doesn't always exist */
+ if (chip_info) {
+ if (chip_info->cs_control)
+ chip->cs_control = chip_info->cs_control;
+
+ chip->poll_mode = chip_info->poll_mode;
+ chip->type = chip_info->type;
+
+ chip->rx_threshold = 0;
+ chip->tx_threshold = 0;
+ }
+
+ if (spi->bits_per_word == 8) {
+ chip->n_bytes = 1;
+ chip->dma_width = 1;
+ } else if (spi->bits_per_word == 16) {
+ chip->n_bytes = 2;
+ chip->dma_width = 2;
+ }
+ chip->bits_per_word = spi->bits_per_word;
+
+ if (!spi->max_speed_hz) {
+ dev_err(&spi->dev, "No max speed HZ parameter\n");
+ return -EINVAL;
+ }
+
+ chip->tmode = 0; /* Tx & Rx */
+ /* Default SPI mode is SCPOL = 0, SCPH = 0 */
+ chip->cr0 = (chip->bits_per_word - 1)
+ | (chip->type << SPI_FRF_OFFSET)
+ | (spi->mode << SPI_MODE_OFFSET)
+ | (chip->tmode << SPI_TMOD_OFFSET);
+
+ if (spi->mode & SPI_LOOP)
+ chip->cr0 |= 1 << SPI_SRL_OFFSET;
+
+ if (gpio_is_valid(spi->cs_gpio)) {
+ ret = gpio_direction_output(spi->cs_gpio,
+ !(spi->mode & SPI_CS_HIGH));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void dw_spi_cleanup(struct spi_device *spi)
+{
+ struct chip_data *chip = spi_get_ctldata(spi);
+
+ kfree(chip);
+ spi_set_ctldata(spi, NULL);
+}
+
+/* Restart the controller, disable all interrupts, clean rx fifo */
+static void spi_hw_init(struct device *dev, struct dw_spi *dws)
+{
+ spi_reset_chip(dws);
+
+ /*
+ * Try to detect the FIFO depth if not set by interface driver,
+ * the depth could be from 2 to 256 from HW spec
+ */
+ if (!dws->fifo_len) {
+ u32 fifo;
+
+ for (fifo = 1; fifo < 256; fifo++) {
+ dw_writel(dws, DW_SPI_TXFLTR, fifo);
+ if (fifo != dw_readl(dws, DW_SPI_TXFLTR))
+ break;
+ }
+ dw_writel(dws, DW_SPI_TXFLTR, 0);
+
+ dws->fifo_len = (fifo == 1) ? 0 : fifo;
+ dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
+ }
+}
+
+int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
+{
+ struct spi_master *master;
+ int ret;
+
+ BUG_ON(dws == NULL);
+
+ master = spi_alloc_master(dev, 0);
+ if (!master)
+ return -ENOMEM;
+
+ dws->master = master;
+ dws->type = SSI_MOTO_SPI;
+ dws->dma_inited = 0;
+ dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60);
+ snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num);
+
+ ret = devm_request_irq(dev, dws->irq, dw_spi_irq, IRQF_SHARED,
+ dws->name, master);
+ if (ret < 0) {
+ dev_err(&master->dev, "can not get IRQ\n");
+ goto err_free_master;
+ }
+
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP;
+ master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+ master->bus_num = dws->bus_num;
+ master->num_chipselect = dws->num_cs;
+ master->setup = dw_spi_setup;
+ master->cleanup = dw_spi_cleanup;
+ master->set_cs = dw_spi_set_cs;
+ master->transfer_one = dw_spi_transfer_one;
+ master->handle_err = dw_spi_handle_err;
+ master->max_speed_hz = dws->max_freq;
+ master->dev.of_node = dev->of_node;
+
+ /* Basic HW init */
+ spi_hw_init(dev, dws);
+
+ if (dws->dma_ops && dws->dma_ops->dma_init) {
+ ret = dws->dma_ops->dma_init(dws);
+ if (ret) {
+ dev_warn(dev, "DMA init failed\n");
+ dws->dma_inited = 0;
+ } else {
+ master->can_dma = dws->dma_ops->can_dma;
+ }
+ }
+
+ spi_master_set_devdata(master, dws);
+ ret = devm_spi_register_master(dev, master);
+ if (ret) {
+ dev_err(&master->dev, "problem registering spi master\n");
+ goto err_dma_exit;
+ }
+
+ dw_spi_debugfs_init(dws);
+ return 0;
+
+err_dma_exit:
+ if (dws->dma_ops && dws->dma_ops->dma_exit)
+ dws->dma_ops->dma_exit(dws);
+ spi_enable_chip(dws, 0);
+err_free_master:
+ spi_master_put(master);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dw_spi_add_host);
+
+void dw_spi_remove_host(struct dw_spi *dws)
+{
+ if (!dws)
+ return;
+ dw_spi_debugfs_remove(dws);
+
+ if (dws->dma_ops && dws->dma_ops->dma_exit)
+ dws->dma_ops->dma_exit(dws);
+ spi_enable_chip(dws, 0);
+ /* Disable clk */
+ spi_set_clk(dws, 0);
+}
+EXPORT_SYMBOL_GPL(dw_spi_remove_host);
+
+int dw_spi_suspend_host(struct dw_spi *dws)
+{
+ int ret = 0;
+
+ ret = spi_master_suspend(dws->master);
+ if (ret)
+ return ret;
+ spi_enable_chip(dws, 0);
+ spi_set_clk(dws, 0);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
+
+int dw_spi_resume_host(struct dw_spi *dws)
+{
+ int ret;
+
+ spi_hw_init(&dws->master->dev, dws);
+ ret = spi_master_resume(dws->master);
+ if (ret)
+ dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dw_spi_resume_host);
+
+MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
+MODULE_DESCRIPTION("Driver for DesignWare SPI controller core");
+MODULE_LICENSE("GPL v2");