These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 37 insertions, 25 deletions

diff --git a/kernel/drivers/rtc/rtc-pcf2127.c b/kernel/drivers/rtc/rtc-pcf2127.c
index 9bd842e97..629bfdf8c 100644
--- a/kernel/drivers/rtc/rtc-pcf2127.c
+++ b/kernel/drivers/rtc/rtc-pcf2127.c
@@ -20,11 +20,12 @@
 #include <linux/module.h>
 #include <linux/of.h>
 
-#define DRV_VERSION "0.0.1"
-
 #define PCF2127_REG_CTRL1       (0x00)  /* Control Register 1 */
 #define PCF2127_REG_CTRL2       (0x01)  /* Control Register 2 */
+
 #define PCF2127_REG_CTRL3       (0x02)  /* Control Register 3 */
+#define PCF2127_REG_CTRL3_BLF		BIT(2)
+
 #define PCF2127_REG_SC          (0x03)  /* datetime */
 #define PCF2127_REG_MN          (0x04)
 #define PCF2127_REG_HR          (0x05)
@@ -33,11 +34,12 @@
 #define PCF2127_REG_MO          (0x08)
 #define PCF2127_REG_YR          (0x09)
 
+#define PCF2127_OSF             BIT(7)  /* Oscillator Fail flag */
+
 static struct i2c_driver pcf2127_driver;
 
 struct pcf2127 {
 	struct rtc_device *rtc;
-	int voltage_low; /* indicates if a low_voltage was detected */
 };
 
 /*
@@ -46,7 +48,6 @@ struct pcf2127 {
  */
 static int pcf2127_get_datetime(struct i2c_client *client, struct rtc_time *tm)
 {
-	struct pcf2127 *pcf2127 = i2c_get_clientdata(client);
 	unsigned char buf[10] = { PCF2127_REG_CTRL1 };
 
 	/* read registers */
@@ -56,10 +57,18 @@ static int pcf2127_get_datetime(struct i2c_client *client, struct rtc_time *tm)
 		return -EIO;
 	}
 
-	if (buf[PCF2127_REG_CTRL3] & 0x04) {
-		pcf2127->voltage_low = 1;
+	if (buf[PCF2127_REG_CTRL3] & PCF2127_REG_CTRL3_BLF)
 		dev_info(&client->dev,
-			"low voltage detected, date/time is not reliable.\n");
+			"low voltage detected, check/replace RTC battery.\n");
+
+	if (buf[PCF2127_REG_SC] & PCF2127_OSF) {
+		/*
+		 * no need clear the flag here,
+		 * it will be cleared once the new date is saved
+		 */
+		dev_warn(&client->dev,
+			 "oscillator stop detected, date/time is not reliable\n");
+		return -EINVAL;
 	}
 
 	dev_dbg(&client->dev,
@@ -88,13 +97,7 @@ static int pcf2127_get_datetime(struct i2c_client *client, struct rtc_time *tm)
 		tm->tm_sec, tm->tm_min, tm->tm_hour,
 		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
 
-	/* the clock can give out invalid datetime, but we cannot return
-	 * -EINVAL otherwise hwclock will refuse to set the time on bootup.
-	 */
-	if (rtc_valid_tm(tm) < 0)
-		dev_err(&client->dev, "retrieved date/time is not valid.\n");
-
-	return 0;
+	return rtc_valid_tm(tm);
 }
 
 static int pcf2127_set_datetime(struct i2c_client *client, struct rtc_time *tm)
@@ -112,7 +115,7 @@ static int pcf2127_set_datetime(struct i2c_client *client, struct rtc_time *tm)
 	buf[i++] = PCF2127_REG_SC;
 
 	/* hours, minutes and seconds */
-	buf[i++] = bin2bcd(tm->tm_sec);
+	buf[i++] = bin2bcd(tm->tm_sec);	/* this will also clear OSF flag */
 	buf[i++] = bin2bcd(tm->tm_min);
 	buf[i++] = bin2bcd(tm->tm_hour);
 	buf[i++] = bin2bcd(tm->tm_mday);
@@ -139,15 +142,28 @@ static int pcf2127_set_datetime(struct i2c_client *client, struct rtc_time *tm)
 static int pcf2127_rtc_ioctl(struct device *dev,
 				unsigned int cmd, unsigned long arg)
 {
-	struct pcf2127 *pcf2127 = i2c_get_clientdata(to_i2c_client(dev));
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf = PCF2127_REG_CTRL3;
+	int touser;
+	int ret;
 
 	switch (cmd) {
 	case RTC_VL_READ:
-		if (pcf2127->voltage_low)
-			dev_info(dev, "low voltage detected, date/time is not reliable.\n");
+		ret = i2c_master_send(client, &buf, 1);
+		if (!ret)
+			ret = -EIO;
+		if (ret < 0)
+			return ret;
+
+		ret = i2c_master_recv(client, &buf, 1);
+		if (!ret)
+			ret = -EIO;
+		if (ret < 0)
+			return ret;
 
-		if (copy_to_user((void __user *)arg, &pcf2127->voltage_low,
-					sizeof(int)))
+		touser = buf & PCF2127_REG_CTRL3_BLF ? 1 : 0;
+
+		if (copy_to_user((void __user *)arg, &touser, sizeof(int)))
 			return -EFAULT;
 		return 0;
 	default:
@@ -189,8 +205,6 @@ static int pcf2127_probe(struct i2c_client *client,
 	if (!pcf2127)
 		return -ENOMEM;
 
-	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-
 	i2c_set_clientdata(client, pcf2127);
 
 	pcf2127->rtc = devm_rtc_device_register(&client->dev,
@@ -217,7 +231,6 @@ MODULE_DEVICE_TABLE(of, pcf2127_of_match);
 static struct i2c_driver pcf2127_driver = {
 	.driver		= {
 		.name	= "rtc-pcf2127",
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(pcf2127_of_match),
 	},
 	.probe		= pcf2127_probe,
@@ -228,5 +241,4 @@ module_i2c_driver(pcf2127_driver);
 
 MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>");
 MODULE_DESCRIPTION("NXP PCF2127 RTC driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL v2");