These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

39 files changed, 3292 insertions, 1136 deletions

diff --git a/kernel/drivers/platform/x86/Kconfig b/kernel/drivers/platform/x86/Kconfig
index f9f205cb1..1089eaa02 100644
--- a/kernel/drivers/platform/x86/Kconfig
+++ b/kernel/drivers/platform/x86/Kconfig
@@ -71,9 +71,10 @@ config ASUS_LAPTOP
 	depends on ACPI
 	select LEDS_CLASS
 	select NEW_LEDS
-	select BACKLIGHT_CLASS_DEVICE
+	depends on BACKLIGHT_CLASS_DEVICE
 	depends on INPUT
 	depends on RFKILL || RFKILL = n
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	select INPUT_SPARSEKMAP
 	select INPUT_POLLDEV
 	---help---
@@ -95,6 +96,7 @@ config DELL_LAPTOP
 	depends on X86
 	depends on DCDBAS
 	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on RFKILL || RFKILL = n
 	depends on SERIO_I8042
 	select POWER_SUPPLY
@@ -109,6 +111,7 @@ config DELL_WMI
 	tristate "Dell WMI extras"
 	depends on ACPI_WMI
 	depends on INPUT
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	select INPUT_SPARSEKMAP
 	---help---
 	  Say Y here if you want to support WMI-based hotkeys on Dell laptops.
@@ -138,12 +141,29 @@ config DELL_SMO8800
 	  To compile this driver as a module, choose M here: the module will
 	  be called dell-smo8800.
 
+config DELL_RBTN
+	tristate "Dell Airplane Mode Switch driver"
+	depends on ACPI
+	depends on INPUT
+	depends on RFKILL
+	---help---
+	  Say Y here if you want to support Dell Airplane Mode Switch ACPI
+	  device on Dell laptops. Sometimes it has names: DELLABCE or DELRBTN.
+	  This driver register rfkill device or input hotkey device depending
+	  on hardware type (hw switch slider or keyboard toggle button). For
+	  rfkill devices it receive HW switch events and set correct hard
+	  rfkill state.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called dell-rbtn.
+
 
 config FUJITSU_LAPTOP
 	tristate "Fujitsu Laptop Extras"
 	depends on ACPI
 	depends on INPUT
 	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on LEDS_CLASS || LEDS_CLASS=n
 	---help---
 	  This is a driver for laptops built by Fujitsu:
@@ -247,6 +267,7 @@ config MSI_LAPTOP
 	tristate "MSI Laptop Extras"
 	depends on ACPI
 	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on RFKILL
 	depends on INPUT && SERIO_I8042
 	select INPUT_SPARSEKMAP
@@ -280,6 +301,7 @@ config COMPAL_LAPTOP
 	tristate "Compal (and others) Laptop Extras"
 	depends on ACPI
 	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on RFKILL
 	depends on HWMON
 	depends on POWER_SUPPLY
@@ -287,8 +309,8 @@ config COMPAL_LAPTOP
 	  This is a driver for laptops built by Compal, and some models by
 	  other brands (e.g. Dell, Toshiba).
 
-	  It adds support for rfkill, Bluetooth, WLAN and LCD brightness
-	  control.
+	  It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon
+	  and battery charging level control.
 
 	  For a (possibly incomplete) list of supported laptops, please refer
 	  to: Documentation/platform/x86-laptop-drivers.txt
@@ -296,7 +318,8 @@ config COMPAL_LAPTOP
 config SONY_LAPTOP
 	tristate "Sony Laptop Extras"
 	depends on ACPI
-	select BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on BACKLIGHT_CLASS_DEVICE
 	depends on INPUT
 	depends on RFKILL
 	  ---help---
@@ -321,6 +344,8 @@ config IDEAPAD_LAPTOP
 	depends on RFKILL && INPUT
 	depends on SERIO_I8042
 	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on ACPI_WMI || ACPI_WMI = n
 	select INPUT_SPARSEKMAP
 	help
 	  This is a driver for Lenovo IdeaPad netbooks contains drivers for
@@ -331,8 +356,8 @@ config THINKPAD_ACPI
 	depends on ACPI
 	depends on INPUT
 	depends on RFKILL || RFKILL = n
-	select BACKLIGHT_LCD_SUPPORT
-	select BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on BACKLIGHT_CLASS_DEVICE
 	select HWMON
 	select NVRAM
 	select NEW_LEDS
@@ -500,8 +525,9 @@ config EEEPC_LAPTOP
 	depends on ACPI
 	depends on INPUT
 	depends on RFKILL || RFKILL = n
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on HOTPLUG_PCI
-	select BACKLIGHT_CLASS_DEVICE
+	depends on BACKLIGHT_CLASS_DEVICE
 	select HWMON
 	select LEDS_CLASS
 	select NEW_LEDS
@@ -587,6 +613,7 @@ config MSI_WMI
 	depends on ACPI_WMI
 	depends on INPUT
 	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	select INPUT_SPARSEKMAP
 	help
 	 Say Y here if you want to support WMI-based hotkeys on MSI laptops.
@@ -612,7 +639,6 @@ config ACPI_TOSHIBA
 	select NEW_LEDS
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on INPUT
-	depends on RFKILL || RFKILL = n
 	depends on SERIO_I8042 || SERIO_I8042 = n
 	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	select INPUT_POLLDEV
@@ -643,6 +669,7 @@ config ACPI_TOSHIBA
 config TOSHIBA_BT_RFKILL
 	tristate "Toshiba Bluetooth RFKill switch support"
 	depends on ACPI
+	depends on RFKILL || RFKILL = n
 	---help---
 	  This driver adds support for Bluetooth events for the RFKill
 	  switch on modern Toshiba laptops with full ACPI support and
@@ -660,7 +687,7 @@ config TOSHIBA_HAPS
 	depends on ACPI
 	---help---
 	  This driver adds support for the built-in accelerometer
-	  found on recent Toshiba laptops equiped with HID TOS620A
+	  found on recent Toshiba laptops equipped with HID TOS620A
 	  device.
 
 	  This driver receives ACPI notify events 0x80 when the sensor
@@ -669,11 +696,29 @@ config TOSHIBA_HAPS
 	  been stabilized.
 
 	  Also provides sysfs entries to get/set the desired protection
-	  level and reseting the HDD protection interface.
+	  level and resetting the HDD protection interface.
 
 	  If you have a recent Toshiba laptop with a built-in accelerometer
 	  device, say Y.
 
+config TOSHIBA_WMI
+	tristate "Toshiba WMI Hotkeys Driver (EXPERIMENTAL)"
+	default n
+	depends on ACPI_WMI
+	depends on INPUT
+	select INPUT_SPARSEKMAP
+	---help---
+	  This driver adds hotkey monitoring support to some Toshiba models
+	  that manage the hotkeys via WMI events.
+
+	  WARNING: This driver is incomplete as it lacks a proper keymap and the
+	  *notify function only prints the ACPI event type value. Be warned that
+	  you will need to provide some information if you have a Toshiba model
+	  with WMI event hotkeys and want to help with the develpment of this
+	  driver.
+
+	  If you have a WMI-based hotkeys Toshiba laptop, say Y or M here.
+
 config ACPI_CMPC
 	tristate "CMPC Laptop Extras"
 	depends on X86 && ACPI
@@ -824,6 +869,7 @@ config MXM_WMI
 config INTEL_OAKTRAIL
 	tristate "Intel Oaktrail Platform Extras"
 	depends on ACPI
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
 	---help---
 	  Intel Oaktrail platform need this driver to provide interfaces to
@@ -885,4 +931,17 @@ config PVPANIC
 	  a paravirtualized device provided by QEMU; it lets a virtual machine
 	  (guest) communicate panic events to the host.
 
+config INTEL_PMC_IPC
+	tristate "Intel PMC IPC Driver"
+	depends on ACPI
+	---help---
+	This driver provides support for PMC control on some Intel platforms.
+	The PMC is an ARC processor which defines IPC commands for communication
+	with other entities in the CPU.
+
+config SURFACE_PRO3_BUTTON
+	tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3 tablet"
+	depends on ACPI && INPUT
+	---help---
+	  This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3 tablet.
 endif # X86_PLATFORM_DEVICES
diff --git a/kernel/drivers/platform/x86/Makefile b/kernel/drivers/platform/x86/Makefile
index f82232b1f..3ca78a3eb 100644
--- a/kernel/drivers/platform/x86/Makefile
+++ b/kernel/drivers/platform/x86/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_DELL_LAPTOP)	+= dell-laptop.o
 obj-$(CONFIG_DELL_WMI)		+= dell-wmi.o
 obj-$(CONFIG_DELL_WMI_AIO)	+= dell-wmi-aio.o
 obj-$(CONFIG_DELL_SMO8800)	+= dell-smo8800.o
+obj-$(CONFIG_DELL_RBTN)		+= dell-rbtn.o
 obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
 obj-$(CONFIG_ACERHDF)		+= acerhdf.o
 obj-$(CONFIG_HP_ACCEL)		+= hp_accel.o
@@ -39,6 +40,7 @@ obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o
 
 obj-$(CONFIG_TOSHIBA_BT_RFKILL)	+= toshiba_bluetooth.o
 obj-$(CONFIG_TOSHIBA_HAPS)	+= toshiba_haps.o
+obj-$(CONFIG_TOSHIBA_WMI)	+= toshiba-wmi.o
 obj-$(CONFIG_INTEL_SCU_IPC)	+= intel_scu_ipc.o
 obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
 obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o
@@ -58,3 +60,5 @@ obj-$(CONFIG_INTEL_SMARTCONNECT)	+= intel-smartconnect.o
 
 obj-$(CONFIG_PVPANIC)           += pvpanic.o
 obj-$(CONFIG_ALIENWARE_WMI)	+= alienware-wmi.o
+obj-$(CONFIG_INTEL_PMC_IPC)	+= intel_pmc_ipc.o
+obj-$(CONFIG_SURFACE_PRO3_BUTTON)	+= surfacepro3_button.o
diff --git a/kernel/drivers/platform/x86/acer-wmi.c b/kernel/drivers/platform/x86/acer-wmi.c
index 3ac29a1e8..1062fa42f 100644
--- a/kernel/drivers/platform/x86/acer-wmi.c
+++ b/kernel/drivers/platform/x86/acer-wmi.c
@@ -807,6 +807,7 @@ static const struct acpi_device_id norfkill_ids[] __initconst = {
 	{ "IBM0068", 0},
 	{ "LEN0068", 0},
 	{ "SNY5001", 0},	/* sony-laptop in charge */
+	{ "HPQ6601", 0},
 	{ "", 0},
 };
 
@@ -1661,58 +1662,6 @@ static void acer_rfkill_exit(void)
 	return;
 }
 
-/*
- * sysfs interface
- */
-static ssize_t show_bool_threeg(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	u32 result; \
-	acpi_status status;
-
-	pr_info("This threeg sysfs will be removed in 2014 - used by: %s\n",
-		current->comm);
-	status = get_u32(&result, ACER_CAP_THREEG);
-	if (ACPI_SUCCESS(status))
-		return sprintf(buf, "%u\n", result);
-	return sprintf(buf, "Read error\n");
-}
-
-static ssize_t set_bool_threeg(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t count)
-{
-	u32 tmp = simple_strtoul(buf, NULL, 10);
-	acpi_status status = set_u32(tmp, ACER_CAP_THREEG);
-	pr_info("This threeg sysfs will be removed in 2014 - used by: %s\n",
-		current->comm);
-	if (ACPI_FAILURE(status))
-		return -EINVAL;
-	return count;
-}
-static DEVICE_ATTR(threeg, S_IRUGO | S_IWUSR, show_bool_threeg,
-	set_bool_threeg);
-
-static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
-	char *buf)
-{
-	pr_info("This interface sysfs will be removed in 2014 - used by: %s\n",
-		current->comm);
-	switch (interface->type) {
-	case ACER_AMW0:
-		return sprintf(buf, "AMW0\n");
-	case ACER_AMW0_V2:
-		return sprintf(buf, "AMW0 v2\n");
-	case ACER_WMID:
-		return sprintf(buf, "WMID\n");
-	case ACER_WMID_v2:
-		return sprintf(buf, "WMID v2\n");
-	default:
-		return sprintf(buf, "Error!\n");
-	}
-}
-
-static DEVICE_ATTR(interface, S_IRUGO, show_interface, NULL);
-
 static void acer_wmi_notify(u32 value, void *context)
 {
 	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -2126,39 +2075,6 @@ static struct platform_driver acer_platform_driver = {
 
 static struct platform_device *acer_platform_device;
 
-static int remove_sysfs(struct platform_device *device)
-{
-	if (has_cap(ACER_CAP_THREEG))
-		device_remove_file(&device->dev, &dev_attr_threeg);
-
-	device_remove_file(&device->dev, &dev_attr_interface);
-
-	return 0;
-}
-
-static int __init create_sysfs(void)
-{
-	int retval = -ENOMEM;
-
-	if (has_cap(ACER_CAP_THREEG)) {
-		retval = device_create_file(&acer_platform_device->dev,
-			&dev_attr_threeg);
-		if (retval)
-			goto error_sysfs;
-	}
-
-	retval = device_create_file(&acer_platform_device->dev,
-		&dev_attr_interface);
-	if (retval)
-		goto error_sysfs;
-
-	return 0;
-
-error_sysfs:
-		remove_sysfs(acer_platform_device);
-	return retval;
-}
-
 static void remove_debugfs(void)
 {
 	debugfs_remove(interface->debug.devices);
@@ -2246,14 +2162,10 @@ static int __init acer_wmi_init(void)
 	set_quirks();
 
 	if (dmi_check_system(video_vendor_dmi_table))
-		acpi_video_dmi_promote_vendor();
-	if (acpi_video_backlight_support()) {
+		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
+
+	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
 		interface->capability &= ~ACER_CAP_BRIGHTNESS;
-		pr_info("Brightness must be controlled by acpi video driver\n");
-	} else {
-		pr_info("Disabling ACPI video driver\n");
-		acpi_video_unregister_backlight();
-	}
 
 	if (wmi_has_guid(WMID_GUID3)) {
 		if (ec_raw_mode) {
@@ -2293,10 +2205,6 @@ static int __init acer_wmi_init(void)
 	if (err)
 		goto error_device_add;
 
-	err = create_sysfs();
-	if (err)
-		goto error_create_sys;
-
 	if (wmi_has_guid(WMID_GUID2)) {
 		interface->debug.wmid_devices = get_wmid_devices();
 		err = create_debugfs();
@@ -2310,8 +2218,6 @@ static int __init acer_wmi_init(void)
 	return 0;
 
 error_create_debugfs:
-	remove_sysfs(acer_platform_device);
-error_create_sys:
 	platform_device_del(acer_platform_device);
 error_device_add:
 	platform_device_put(acer_platform_device);
@@ -2334,7 +2240,6 @@ static void __exit acer_wmi_exit(void)
 	if (has_cap(ACER_CAP_ACCEL))
 		acer_wmi_accel_destroy();
 
-	remove_sysfs(acer_platform_device);
 	remove_debugfs();
 	platform_device_unregister(acer_platform_device);
 	platform_driver_unregister(&acer_platform_driver);
diff --git a/kernel/drivers/platform/x86/acerhdf.c b/kernel/drivers/platform/x86/acerhdf.c
index 594c918b5..460fa6708 100644
--- a/kernel/drivers/platform/x86/acerhdf.c
+++ b/kernel/drivers/platform/x86/acerhdf.c
@@ -346,8 +346,7 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
  * as late as the polling interval is since we can't do that in the respective
  * accessors of the module parameters.
  */
-static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal,
-			       unsigned long *t)
+static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal, int *t)
 {
 	int temp, err = 0;
 
@@ -372,7 +371,8 @@ static int acerhdf_bind(struct thermal_zone_device *thermal,
 		return 0;
 
 	if (thermal_zone_bind_cooling_device(thermal, 0, cdev,
-			THERMAL_NO_LIMIT, THERMAL_NO_LIMIT)) {
+			THERMAL_NO_LIMIT, THERMAL_NO_LIMIT,
+			THERMAL_WEIGHT_DEFAULT)) {
 		pr_err("error binding cooling dev\n");
 		return -EINVAL;
 	}
@@ -452,7 +452,7 @@ static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
 }
 
 static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip,
-				 unsigned long *temp)
+				 int *temp)
 {
 	if (trip != 0)
 		return -EINVAL;
@@ -463,7 +463,7 @@ static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip,
 }
 
 static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
-				 unsigned long *temp)
+				 int *temp)
 {
 	if (trip == 0)
 		*temp = fanon;
@@ -476,7 +476,7 @@ static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
 }
 
 static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
-				 unsigned long *temperature)
+				 int *temperature)
 {
 	*temperature = ACERHDF_TEMP_CRIT;
 	return 0;
diff --git a/kernel/drivers/platform/x86/apple-gmux.c b/kernel/drivers/platform/x86/apple-gmux.c
index 680871500..976efeb3f 100644
--- a/kernel/drivers/platform/x86/apple-gmux.c
+++ b/kernel/drivers/platform/x86/apple-gmux.c
@@ -346,7 +346,7 @@ gmux_active_client(struct apple_gmux_data *gmux_data)
 	return VGA_SWITCHEROO_DIS;
 }
 
-static struct vga_switcheroo_handler gmux_handler = {
+static const struct vga_switcheroo_handler gmux_handler = {
 	.switchto = gmux_switchto,
 	.power_state = gmux_set_power_state,
 	.get_client_id = gmux_get_client_id,
@@ -550,8 +550,7 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
 	 * backlight control and supports more levels than other options.
 	 * Disable the other backlight choices.
 	 */
-	acpi_video_dmi_promote_vendor();
-	acpi_video_unregister();
+	acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
 	apple_bl_unregister();
 
 	gmux_data->power_state = VGA_SWITCHEROO_ON;
@@ -645,7 +644,6 @@ static void gmux_remove(struct pnp_dev *pnp)
 	apple_gmux_data = NULL;
 	kfree(gmux_data);
 
-	acpi_video_dmi_demote_vendor();
 	acpi_video_register();
 	apple_bl_register();
 }
diff --git a/kernel/drivers/platform/x86/asus-laptop.c b/kernel/drivers/platform/x86/asus-laptop.c
index 46b274693..f2b5d0a8a 100644
--- a/kernel/drivers/platform/x86/asus-laptop.c
+++ b/kernel/drivers/platform/x86/asus-laptop.c
@@ -54,6 +54,7 @@
 #include <linux/slab.h>
 #include <linux/dmi.h>
 #include <linux/acpi.h>
+#include <acpi/video.h>
 
 #define ASUS_LAPTOP_VERSION	"0.42"
 
@@ -331,6 +332,7 @@ static const struct key_entry asus_keymap[] = {
 	{KE_KEY, 0x65, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + TV */
 	{KE_KEY, 0x66, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + TV */
 	{KE_KEY, 0x67, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV */
+	{KE_KEY, 0x6A, { KEY_TOUCHPAD_TOGGLE } }, /* Lock Touchpad Fn + F9 */
 	{KE_KEY, 0x6B, { KEY_TOUCHPAD_TOGGLE } }, /* Lock Touchpad */
 	{KE_KEY, 0x6C, { KEY_SLEEP } }, /* Suspend */
 	{KE_KEY, 0x6D, { KEY_SLEEP } }, /* Hibernate */
@@ -1884,12 +1886,11 @@ static int asus_acpi_add(struct acpi_device *device)
 	if (result)
 		goto fail_platform;
 
-	if (!acpi_video_backlight_support()) {
+	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		result = asus_backlight_init(asus);
 		if (result)
 			goto fail_backlight;
-	} else
-		pr_info("Backlight controlled by ACPI video driver\n");
+	}
 
 	result = asus_input_init(asus);
 	if (result)
diff --git a/kernel/drivers/platform/x86/asus-nb-wmi.c b/kernel/drivers/platform/x86/asus-nb-wmi.c
index abdaed34c..131fee2b0 100644
--- a/kernel/drivers/platform/x86/asus-nb-wmi.c
+++ b/kernel/drivers/platform/x86/asus-nb-wmi.c
@@ -128,6 +128,24 @@ static const struct dmi_system_id asus_quirks[] = {
 	},
 	{
 		.callback = dmi_matched,
+		.ident = "ASUSTeK COMPUTER INC. X456UA",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X456UA"),
+		},
+		.driver_data = &quirk_asus_wapf4,
+	},
+	{
+		.callback = dmi_matched,
+		.ident = "ASUSTeK COMPUTER INC. X456UF",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X456UF"),
+		},
+		.driver_data = &quirk_asus_wapf4,
+	},
+	{
+		.callback = dmi_matched,
 		.ident = "ASUSTeK COMPUTER INC. X501U",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
diff --git a/kernel/drivers/platform/x86/asus-wmi.c b/kernel/drivers/platform/x86/asus-wmi.c
index 7543a56e0..f96f7b865 100644
--- a/kernel/drivers/platform/x86/asus-wmi.c
+++ b/kernel/drivers/platform/x86/asus-wmi.c
@@ -78,6 +78,7 @@ MODULE_LICENSE("GPL");
 #define ASUS_WMI_METHODID_GPID		0x44495047 /* Get Panel ID?? (Resol) */
 #define ASUS_WMI_METHODID_QMOD		0x444F4D51 /* Quiet MODe */
 #define ASUS_WMI_METHODID_SPLV		0x4C425053 /* Set Panel Light Value */
+#define ASUS_WMI_METHODID_AGFN		0x4E464741 /* FaN? */
 #define ASUS_WMI_METHODID_SFUN		0x4E554653 /* FUNCtionalities */
 #define ASUS_WMI_METHODID_SDSP		0x50534453 /* Set DiSPlay output */
 #define ASUS_WMI_METHODID_GDSP		0x50534447 /* Get DiSPlay output */
@@ -150,12 +151,38 @@ MODULE_LICENSE("GPL");
 #define ASUS_WMI_DSTS_BRIGHTNESS_MASK	0x000000FF
 #define ASUS_WMI_DSTS_MAX_BRIGTH_MASK	0x0000FF00
 
+#define ASUS_FAN_DESC			"cpu_fan"
+#define ASUS_FAN_MFUN			0x13
+#define ASUS_FAN_SFUN_READ		0x06
+#define ASUS_FAN_SFUN_WRITE		0x07
+#define ASUS_FAN_CTRL_MANUAL		1
+#define ASUS_FAN_CTRL_AUTO		2
+
 struct bios_args {
 	u32 arg0;
 	u32 arg1;
 } __packed;
 
 /*
+ * Struct that's used for all methods called via AGFN. Naming is
+ * identically to the AML code.
+ */
+struct agfn_args {
+	u16 mfun; /* probably "Multi-function" to be called */
+	u16 sfun; /* probably "Sub-function" to be called */
+	u16 len;  /* size of the hole struct, including subfunction fields */
+	u8 stas;  /* not used by now */
+	u8 err;   /* zero on success */
+} __packed;
+
+/* struct used for calling fan read and write methods */
+struct fan_args {
+	struct agfn_args agfn;	/* common fields */
+	u8 fan;			/* fan number: 0: set auto mode 1: 1st fan */
+	u32 speed;		/* read: RPM/100 - write: 0-255 */
+} __packed;
+
+/*
  * <platform>/    - debugfs root directory
  *   dev_id      - current dev_id
  *   ctrl_param  - current ctrl_param
@@ -204,6 +231,10 @@ struct asus_wmi {
 	struct asus_rfkill gps;
 	struct asus_rfkill uwb;
 
+	bool asus_hwmon_fan_manual_mode;
+	int asus_hwmon_num_fans;
+	int asus_hwmon_pwm;
+
 	struct hotplug_slot *hotplug_slot;
 	struct mutex hotplug_lock;
 	struct mutex wmi_lock;
@@ -294,6 +325,36 @@ exit:
 	return 0;
 }
 
+static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args)
+{
+	struct acpi_buffer input;
+	u64 phys_addr;
+	u32 retval;
+	u32 status = -1;
+
+	/*
+	 * Copy to dma capable address otherwise memory corruption occurs as
+	 * bios has to be able to access it.
+	 */
+	input.pointer = kzalloc(args.length, GFP_DMA | GFP_KERNEL);
+	input.length = args.length;
+	if (!input.pointer)
+		return -ENOMEM;
+	phys_addr = virt_to_phys(input.pointer);
+	memcpy(input.pointer, args.pointer, args.length);
+
+	status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_AGFN,
+					phys_addr, 0, &retval);
+	if (!status)
+		memcpy(args.pointer, input.pointer, args.length);
+
+	kfree(input.pointer);
+	if (status)
+		return -ENXIO;
+
+	return retval;
+}
+
 static int asus_wmi_get_devstate(struct asus_wmi *asus, u32 dev_id, u32 *retval)
 {
 	return asus_wmi_evaluate_method(asus->dsts_id, dev_id, 0, retval);
@@ -521,7 +582,7 @@ static void asus_wmi_led_exit(struct asus_wmi *asus)
 
 static int asus_wmi_led_init(struct asus_wmi *asus)
 {
-	int rv = 0;
+	int rv = 0, led_val;
 
 	asus->led_workqueue = create_singlethread_workqueue("led_workqueue");
 	if (!asus->led_workqueue)
@@ -541,9 +602,11 @@ static int asus_wmi_led_init(struct asus_wmi *asus)
 			goto error;
 	}
 
-	if (kbd_led_read(asus, NULL, NULL) >= 0) {
+	led_val = kbd_led_read(asus, NULL, NULL);
+	if (led_val >= 0) {
 		INIT_WORK(&asus->kbd_led_work, kbd_led_update);
 
+		asus->kbd_led_wk = led_val;
 		asus->kbd_led.name = "asus::kbd_backlight";
 		asus->kbd_led.brightness_set = kbd_led_set;
 		asus->kbd_led.brightness_get = kbd_led_get;
@@ -1022,35 +1085,228 @@ exit:
 /*
  * Hwmon device
  */
-static ssize_t asus_hwmon_pwm1(struct device *dev,
-			       struct device_attribute *attr,
-			       char *buf)
+static int asus_hwmon_agfn_fan_speed_read(struct asus_wmi *asus, int fan,
+					  int *speed)
+{
+	struct fan_args args = {
+		.agfn.len = sizeof(args),
+		.agfn.mfun = ASUS_FAN_MFUN,
+		.agfn.sfun = ASUS_FAN_SFUN_READ,
+		.fan = fan,
+		.speed = 0,
+	};
+	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+	int status;
+
+	if (fan != 1)
+		return -EINVAL;
+
+	status = asus_wmi_evaluate_method_agfn(input);
+
+	if (status || args.agfn.err)
+		return -ENXIO;
+
+	if (speed)
+		*speed = args.speed;
+
+	return 0;
+}
+
+static int asus_hwmon_agfn_fan_speed_write(struct asus_wmi *asus, int fan,
+				     int *speed)
+{
+	struct fan_args args = {
+		.agfn.len = sizeof(args),
+		.agfn.mfun = ASUS_FAN_MFUN,
+		.agfn.sfun = ASUS_FAN_SFUN_WRITE,
+		.fan = fan,
+		.speed = speed ?  *speed : 0,
+	};
+	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+	int status;
+
+	/* 1: for setting 1st fan's speed 0: setting auto mode */
+	if (fan != 1 && fan != 0)
+		return -EINVAL;
+
+	status = asus_wmi_evaluate_method_agfn(input);
+
+	if (status || args.agfn.err)
+		return -ENXIO;
+
+	if (speed && fan == 1)
+		asus->asus_hwmon_pwm = *speed;
+
+	return 0;
+}
+
+/*
+ * Check if we can read the speed of one fan. If true we assume we can also
+ * control it.
+ */
+static int asus_hwmon_get_fan_number(struct asus_wmi *asus, int *num_fans)
+{
+	int status;
+	int speed = 0;
+
+	*num_fans = 0;
+
+	status = asus_hwmon_agfn_fan_speed_read(asus, 1, &speed);
+	if (!status)
+		*num_fans = 1;
+
+	return 0;
+}
+
+static int asus_hwmon_fan_set_auto(struct asus_wmi *asus)
+{
+	int status;
+
+	status = asus_hwmon_agfn_fan_speed_write(asus, 0, NULL);
+	if (status)
+		return -ENXIO;
+
+	asus->asus_hwmon_fan_manual_mode = false;
+
+	return 0;
+}
+
+static int asus_hwmon_fan_rpm_show(struct device *dev, int fan)
 {
 	struct asus_wmi *asus = dev_get_drvdata(dev);
-	u32 value;
+	int value;
+	int ret;
+
+	/* no speed readable on manual mode */
+	if (asus->asus_hwmon_fan_manual_mode)
+		return -ENXIO;
+
+	ret = asus_hwmon_agfn_fan_speed_read(asus, fan+1, &value);
+	if (ret) {
+		pr_warn("reading fan speed failed: %d\n", ret);
+		return -ENXIO;
+	}
+
+	return value;
+}
+
+static void asus_hwmon_pwm_show(struct asus_wmi *asus, int fan, int *value)
+{
 	int err;
 
-	err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, &value);
+	if (asus->asus_hwmon_pwm >= 0) {
+		*value = asus->asus_hwmon_pwm;
+		return;
+	}
 
+	err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, value);
 	if (err < 0)
-		return err;
+		return;
 
-	value &= 0xFF;
-
-	if (value == 1) /* Low Speed */
-		value = 85;
-	else if (value == 2)
-		value = 170;
-	else if (value == 3)
-		value = 255;
-	else if (value != 0) {
-		pr_err("Unknown fan speed %#x\n", value);
-		value = -1;
+	*value &= 0xFF;
+
+	if (*value == 1) /* Low Speed */
+		*value = 85;
+	else if (*value == 2)
+		*value = 170;
+	else if (*value == 3)
+		*value = 255;
+	else if (*value) {
+		pr_err("Unknown fan speed %#x\n", *value);
+		*value = -1;
 	}
+}
+
+static ssize_t pwm1_show(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	int value;
+
+	asus_hwmon_pwm_show(asus, 0, &value);
 
 	return sprintf(buf, "%d\n", value);
 }
 
+static ssize_t pwm1_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count) {
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	int value;
+	int state;
+	int ret;
+
+	ret = kstrtouint(buf, 10, &value);
+
+	if (ret)
+		return ret;
+
+	value = clamp(value, 0, 255);
+
+	state = asus_hwmon_agfn_fan_speed_write(asus, 1, &value);
+	if (state)
+		pr_warn("Setting fan speed failed: %d\n", state);
+	else
+		asus->asus_hwmon_fan_manual_mode = true;
+
+	return count;
+}
+
+static ssize_t fan1_input_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	int value = asus_hwmon_fan_rpm_show(dev, 0);
+
+	return sprintf(buf, "%d\n", value < 0 ? -1 : value*100);
+
+}
+
+static ssize_t pwm1_enable_show(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+
+	if (asus->asus_hwmon_fan_manual_mode)
+		return sprintf(buf, "%d\n", ASUS_FAN_CTRL_MANUAL);
+
+	return sprintf(buf, "%d\n", ASUS_FAN_CTRL_AUTO);
+}
+
+static ssize_t pwm1_enable_store(struct device *dev,
+						  struct device_attribute *attr,
+						  const char *buf, size_t count)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	int status = 0;
+	int state;
+	int ret;
+
+	ret = kstrtouint(buf, 10, &state);
+
+	if (ret)
+		return ret;
+
+	if (state == ASUS_FAN_CTRL_MANUAL)
+		asus->asus_hwmon_fan_manual_mode = true;
+	else
+		status = asus_hwmon_fan_set_auto(asus);
+
+	if (status)
+		return status;
+
+	return count;
+}
+
+static ssize_t fan1_label_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	return sprintf(buf, "%s\n", ASUS_FAN_DESC);
+}
+
 static ssize_t asus_hwmon_temp1(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
@@ -1064,16 +1320,26 @@ static ssize_t asus_hwmon_temp1(struct device *dev,
 	if (err < 0)
 		return err;
 
-	value = KELVIN_TO_CELSIUS((value & 0xFFFF)) * 1000;
+	value = DECI_KELVIN_TO_CELSIUS((value & 0xFFFF)) * 1000;
 
 	return sprintf(buf, "%d\n", value);
 }
 
-static DEVICE_ATTR(pwm1, S_IRUGO, asus_hwmon_pwm1, NULL);
+/* Fan1 */
+static DEVICE_ATTR_RW(pwm1);
+static DEVICE_ATTR_RW(pwm1_enable);
+static DEVICE_ATTR_RO(fan1_input);
+static DEVICE_ATTR_RO(fan1_label);
+
+/* Temperature */
 static DEVICE_ATTR(temp1_input, S_IRUGO, asus_hwmon_temp1, NULL);
 
 static struct attribute *hwmon_attributes[] = {
 	&dev_attr_pwm1.attr,
+	&dev_attr_pwm1_enable.attr,
+	&dev_attr_fan1_input.attr,
+	&dev_attr_fan1_label.attr,
+
 	&dev_attr_temp1_input.attr,
 	NULL
 };
@@ -1084,19 +1350,28 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct platform_device *pdev = to_platform_device(dev->parent);
 	struct asus_wmi *asus = platform_get_drvdata(pdev);
-	bool ok = true;
 	int dev_id = -1;
+	int fan_attr = -1;
 	u32 value = ASUS_WMI_UNSUPPORTED_METHOD;
+	bool ok = true;
 
 	if (attr == &dev_attr_pwm1.attr)
 		dev_id = ASUS_WMI_DEVID_FAN_CTRL;
 	else if (attr == &dev_attr_temp1_input.attr)
 		dev_id = ASUS_WMI_DEVID_THERMAL_CTRL;
 
+
+	if (attr == &dev_attr_fan1_input.attr
+	    || attr == &dev_attr_fan1_label.attr
+	    || attr == &dev_attr_pwm1.attr
+	    || attr == &dev_attr_pwm1_enable.attr) {
+		fan_attr = 1;
+	}
+
 	if (dev_id != -1) {
 		int err = asus_wmi_get_devstate(asus, dev_id, &value);
 
-		if (err < 0)
+		if (err < 0 && fan_attr == -1)
 			return 0; /* can't return negative here */
 	}
 
@@ -1112,10 +1387,16 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
 		if (value == ASUS_WMI_UNSUPPORTED_METHOD || value & 0xFFF80000
 		    || (!asus->sfun && !(value & ASUS_WMI_DSTS_PRESENCE_BIT)))
 			ok = false;
+		else
+			ok = fan_attr <= asus->asus_hwmon_num_fans;
 	} else if (dev_id == ASUS_WMI_DEVID_THERMAL_CTRL) {
 		/* If value is zero, something is clearly wrong */
-		if (value == 0)
+		if (!value)
 			ok = false;
+	} else if (fan_attr <= asus->asus_hwmon_num_fans && fan_attr != -1) {
+		ok = true;
+	} else {
+		ok = false;
 	}
 
 	return ok ? attr->mode : 0;
@@ -1364,7 +1645,7 @@ static void asus_wmi_notify(u32 value, void *context)
 		code = ASUS_WMI_BRN_DOWN;
 
 	if (code == ASUS_WMI_BRN_DOWN || code == ASUS_WMI_BRN_UP) {
-		if (!acpi_video_backlight_support()) {
+		if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 			asus_wmi_backlight_notify(asus, orig_code);
 			goto exit;
 		}
@@ -1401,7 +1682,7 @@ static ssize_t store_sys_wmi(struct asus_wmi *asus, int devid,
 	int rv, err, value;
 
 	value = asus_wmi_get_devstate_simple(asus, devid);
-	if (value == -ENODEV)	/* Check device presence */
+	if (value < 0)
 		return value;
 
 	rv = parse_arg(buf, count, &value);
@@ -1723,6 +2004,25 @@ error_debugfs:
 	return -ENOMEM;
 }
 
+static int asus_wmi_fan_init(struct asus_wmi *asus)
+{
+	int status;
+
+	asus->asus_hwmon_pwm = -1;
+	asus->asus_hwmon_num_fans = -1;
+	asus->asus_hwmon_fan_manual_mode = false;
+
+	status = asus_hwmon_get_fan_number(asus, &asus->asus_hwmon_num_fans);
+	if (status) {
+		asus->asus_hwmon_num_fans = 0;
+		pr_warn("Could not determine number of fans: %d\n", status);
+		return -ENXIO;
+	}
+
+	pr_info("Number of fans: %d\n", asus->asus_hwmon_num_fans);
+	return 0;
+}
+
 /*
  * WMI Driver
  */
@@ -1756,6 +2056,9 @@ static int asus_wmi_add(struct platform_device *pdev)
 	if (err)
 		goto fail_input;
 
+	err = asus_wmi_fan_init(asus); /* probably no problems on error */
+	asus_hwmon_fan_set_auto(asus);
+
 	err = asus_wmi_hwmon_init(asus);
 	if (err)
 		goto fail_hwmon;
@@ -1772,17 +2075,16 @@ static int asus_wmi_add(struct platform_device *pdev)
 	   stop this from showing up */
 	chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
 	if (chassis_type && !strcmp(chassis_type, "3"))
-		acpi_video_dmi_promote_vendor();
+		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
+
 	if (asus->driver->quirks->wmi_backlight_power)
-		acpi_video_dmi_promote_vendor();
-	if (!acpi_video_backlight_support()) {
-		pr_info("Disabling ACPI video driver\n");
-		acpi_video_unregister();
+		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
+
+	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		err = asus_wmi_backlight_init(asus);
 		if (err && err != -ENODEV)
 			goto fail_backlight;
-	} else
-		pr_info("Backlight controlled by ACPI video driver\n");
+	}
 
 	status = wmi_install_notify_handler(asus->driver->event_guid,
 					    asus_wmi_notify, asus);
@@ -1832,6 +2134,7 @@ static int asus_wmi_remove(struct platform_device *device)
 	asus_wmi_rfkill_exit(asus);
 	asus_wmi_debugfs_exit(asus);
 	asus_wmi_platform_exit(asus);
+	asus_hwmon_fan_set_auto(asus);
 
 	kfree(asus);
 	return 0;
@@ -1859,6 +2162,16 @@ static int asus_hotk_thaw(struct device *device)
 	return 0;
 }
 
+static int asus_hotk_resume(struct device *device)
+{
+	struct asus_wmi *asus = dev_get_drvdata(device);
+
+	if (!IS_ERR_OR_NULL(asus->kbd_led.dev))
+		queue_work(asus->led_workqueue, &asus->kbd_led_work);
+
+	return 0;
+}
+
 static int asus_hotk_restore(struct device *device)
 {
 	struct asus_wmi *asus = dev_get_drvdata(device);
@@ -1889,6 +2202,8 @@ static int asus_hotk_restore(struct device *device)
 		bl = !asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_UWB);
 		rfkill_set_sw_state(asus->uwb.rfkill, bl);
 	}
+	if (!IS_ERR_OR_NULL(asus->kbd_led.dev))
+		queue_work(asus->led_workqueue, &asus->kbd_led_work);
 
 	return 0;
 }
@@ -1896,6 +2211,7 @@ static int asus_hotk_restore(struct device *device)
 static const struct dev_pm_ops asus_pm_ops = {
 	.thaw = asus_hotk_thaw,
 	.restore = asus_hotk_restore,
+	.resume = asus_hotk_resume,
 };
 
 static int asus_wmi_probe(struct platform_device *pdev)
diff --git a/kernel/drivers/platform/x86/compal-laptop.c b/kernel/drivers/platform/x86/compal-laptop.c
index b4e94471f..e1c2b6d4b 100644
--- a/kernel/drivers/platform/x86/compal-laptop.c
+++ b/kernel/drivers/platform/x86/compal-laptop.c
@@ -82,7 +82,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/power_supply.h>
 #include <linux/fb.h>
-
+#include <acpi/video.h>
 
 /* ======= */
 /* Defines */
@@ -151,6 +151,8 @@
 #define BAT_STATUS2			0xF1
 #define BAT_STOP_CHARGE1		0xF2
 #define BAT_STOP_CHARGE2		0xF3
+#define BAT_CHARGE_LIMIT		0x03
+#define BAT_CHARGE_LIMIT_MAX		100
 
 #define BAT_S0_DISCHARGE		(1 << 0)
 #define BAT_S0_DISCHRG_CRITICAL		(1 << 2)
@@ -601,6 +603,12 @@ static int bat_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
 		val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		val->intval = ec_read_u8(BAT_CHARGE_LIMIT);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+		val->intval = BAT_CHARGE_LIMIT_MAX;
+		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
 		val->intval = ec_read_u8(BAT_CAPACITY);
 		break;
@@ -634,6 +642,36 @@ static int bat_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int bat_set_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				const union power_supply_propval *val)
+{
+	int level;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		level = val->intval;
+		if (level < 0 || level > BAT_CHARGE_LIMIT_MAX)
+			return -EINVAL;
+		if (ec_write(BAT_CHARGE_LIMIT, level) < 0)
+			return -EIO;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static int bat_writeable_property(struct power_supply *psy,
+				enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		return 1;
+	default:
+		return 0;
+	}
+}
 
 
 
@@ -726,6 +764,8 @@ static enum power_supply_property compal_bat_properties[] = {
 	POWER_SUPPLY_PROP_POWER_NOW,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TEMP,
@@ -880,11 +920,12 @@ static const struct power_supply_desc psy_bat_desc = {
 	.properties	= compal_bat_properties,
 	.num_properties	= ARRAY_SIZE(compal_bat_properties),
 	.get_property	= bat_get_property,
+	.set_property	= bat_set_property,
+	.property_is_writeable = bat_writeable_property,
 };
 
 static void initialize_power_supply_data(struct compal_data *data)
 {
-
 	ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
 					data->bat_manufacturer_name,
 					BAT_MANUFACTURER_NAME_LEN);
@@ -959,7 +1000,7 @@ static int __init compal_init(void)
 		return -ENODEV;
 	}
 
-	if (!acpi_video_backlight_support()) {
+	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		struct backlight_properties props;
 		memset(&props, 0, sizeof(struct backlight_properties));
 		props.type = BACKLIGHT_PLATFORM;
diff --git a/kernel/drivers/platform/x86/dell-laptop.c b/kernel/drivers/platform/x86/dell-laptop.c
index 2c1d5f543..aaeeae81e 100644
--- a/kernel/drivers/platform/x86/dell-laptop.c
+++ b/kernel/drivers/platform/x86/dell-laptop.c
@@ -31,7 +31,9 @@
 #include <linux/slab.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
+#include <acpi/video.h>
 #include "../../firmware/dcdbas.h"
+#include "dell-rbtn.h"
 
 #define BRIGHTNESS_TOKEN 0x7d
 #define KBD_LED_OFF_TOKEN 0x01E1
@@ -307,12 +309,15 @@ static const struct dmi_system_id dell_quirks[] __initconst = {
 static struct calling_interface_buffer *buffer;
 static DEFINE_MUTEX(buffer_mutex);
 
-static int hwswitch_state;
+static void clear_buffer(void)
+{
+	memset(buffer, 0, sizeof(struct calling_interface_buffer));
+}
 
 static void get_buffer(void)
 {
 	mutex_lock(&buffer_mutex);
-	memset(buffer, 0, sizeof(struct calling_interface_buffer));
+	clear_buffer();
 }
 
 static void release_buffer(void)
@@ -421,66 +426,166 @@ static inline int dell_smi_error(int value)
 	}
 }
 
-/* Derived from information in DellWirelessCtl.cpp:
-   Class 17, select 11 is radio control. It returns an array of 32-bit values.
-
-   Input byte 0 = 0: Wireless information
-
-   result[0]: return code
-   result[1]:
-     Bit 0:      Hardware switch supported
-     Bit 1:      Wifi locator supported
-     Bit 2:      Wifi is supported
-     Bit 3:      Bluetooth is supported
-     Bit 4:      WWAN is supported
-     Bit 5:      Wireless keyboard supported
-     Bits 6-7:   Reserved
-     Bit 8:      Wifi is installed
-     Bit 9:      Bluetooth is installed
-     Bit 10:     WWAN is installed
-     Bits 11-15: Reserved
-     Bit 16:     Hardware switch is on
-     Bit 17:     Wifi is blocked
-     Bit 18:     Bluetooth is blocked
-     Bit 19:     WWAN is blocked
-     Bits 20-31: Reserved
-   result[2]: NVRAM size in bytes
-   result[3]: NVRAM format version number
-
-   Input byte 0 = 2: Wireless switch configuration
-   result[0]: return code
-   result[1]:
-     Bit 0:      Wifi controlled by switch
-     Bit 1:      Bluetooth controlled by switch
-     Bit 2:      WWAN controlled by switch
-     Bits 3-6:   Reserved
-     Bit 7:      Wireless switch config locked
-     Bit 8:      Wifi locator enabled
-     Bits 9-14:  Reserved
-     Bit 15:     Wifi locator setting locked
-     Bits 16-31: Reserved
-*/
+/*
+ * Derived from information in smbios-wireless-ctl:
+ *
+ * cbSelect 17, Value 11
+ *
+ * Return Wireless Info
+ * cbArg1, byte0 = 0x00
+ *
+ *     cbRes1 Standard return codes (0, -1, -2)
+ *     cbRes2 Info bit flags:
+ *
+ *     0 Hardware switch supported (1)
+ *     1 WiFi locator supported (1)
+ *     2 WLAN supported (1)
+ *     3 Bluetooth (BT) supported (1)
+ *     4 WWAN supported (1)
+ *     5 Wireless KBD supported (1)
+ *     6 Uw b supported (1)
+ *     7 WiGig supported (1)
+ *     8 WLAN installed (1)
+ *     9 BT installed (1)
+ *     10 WWAN installed (1)
+ *     11 Uw b installed (1)
+ *     12 WiGig installed (1)
+ *     13-15 Reserved (0)
+ *     16 Hardware (HW) switch is On (1)
+ *     17 WLAN disabled (1)
+ *     18 BT disabled (1)
+ *     19 WWAN disabled (1)
+ *     20 Uw b disabled (1)
+ *     21 WiGig disabled (1)
+ *     20-31 Reserved (0)
+ *
+ *     cbRes3 NVRAM size in bytes
+ *     cbRes4, byte 0 NVRAM format version number
+ *
+ *
+ * Set QuickSet Radio Disable Flag
+ *     cbArg1, byte0 = 0x01
+ *     cbArg1, byte1
+ *     Radio ID     value:
+ *     0        Radio Status
+ *     1        WLAN ID
+ *     2        BT ID
+ *     3        WWAN ID
+ *     4        UWB ID
+ *     5        WIGIG ID
+ *     cbArg1, byte2    Flag bits:
+ *             0 QuickSet disables radio (1)
+ *             1-7 Reserved (0)
+ *
+ *     cbRes1    Standard return codes (0, -1, -2)
+ *     cbRes2    QuickSet (QS) radio disable bit map:
+ *     0 QS disables WLAN
+ *     1 QS disables BT
+ *     2 QS disables WWAN
+ *     3 QS disables UWB
+ *     4 QS disables WIGIG
+ *     5-31 Reserved (0)
+ *
+ * Wireless Switch Configuration
+ *     cbArg1, byte0 = 0x02
+ *
+ *     cbArg1, byte1
+ *     Subcommand:
+ *     0 Get config
+ *     1 Set config
+ *     2 Set WiFi locator enable/disable
+ *     cbArg1,byte2
+ *     Switch settings (if byte 1==1):
+ *     0 WLAN sw itch control (1)
+ *     1 BT sw itch control (1)
+ *     2 WWAN sw itch control (1)
+ *     3 UWB sw itch control (1)
+ *     4 WiGig sw itch control (1)
+ *     5-7 Reserved (0)
+ *    cbArg1, byte2 Enable bits (if byte 1==2):
+ *     0 Enable WiFi locator (1)
+ *
+ *    cbRes1     Standard return codes (0, -1, -2)
+ *    cbRes2 QuickSet radio disable bit map:
+ *     0 WLAN controlled by sw itch (1)
+ *     1 BT controlled by sw itch (1)
+ *     2 WWAN controlled by sw itch (1)
+ *     3 UWB controlled by sw itch (1)
+ *     4 WiGig controlled by sw itch (1)
+ *     5-6 Reserved (0)
+ *     7 Wireless sw itch config locked (1)
+ *     8 WiFi locator enabled (1)
+ *     9-14 Reserved (0)
+ *     15 WiFi locator setting locked (1)
+ *     16-31 Reserved (0)
+ *
+ * Read Local Config Data (LCD)
+ *     cbArg1, byte0 = 0x10
+ *     cbArg1, byte1 NVRAM index low byte
+ *     cbArg1, byte2 NVRAM index high byte
+ *     cbRes1 Standard return codes (0, -1, -2)
+ *     cbRes2 4 bytes read from LCD[index]
+ *     cbRes3 4 bytes read from LCD[index+4]
+ *     cbRes4 4 bytes read from LCD[index+8]
+ *
+ * Write Local Config Data (LCD)
+ *     cbArg1, byte0 = 0x11
+ *     cbArg1, byte1 NVRAM index low byte
+ *     cbArg1, byte2 NVRAM index high byte
+ *     cbArg2 4 bytes to w rite at LCD[index]
+ *     cbArg3 4 bytes to w rite at LCD[index+4]
+ *     cbArg4 4 bytes to w rite at LCD[index+8]
+ *     cbRes1 Standard return codes (0, -1, -2)
+ *
+ * Populate Local Config Data from NVRAM
+ *     cbArg1, byte0 = 0x12
+ *     cbRes1 Standard return codes (0, -1, -2)
+ *
+ * Commit Local Config Data to NVRAM
+ *     cbArg1, byte0 = 0x13
+ *     cbRes1 Standard return codes (0, -1, -2)
+ */
 
 static int dell_rfkill_set(void *data, bool blocked)
 {
 	int disable = blocked ? 1 : 0;
 	unsigned long radio = (unsigned long)data;
 	int hwswitch_bit = (unsigned long)data - 1;
+	int hwswitch;
+	int status;
+	int ret;
 
 	get_buffer();
+
+	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
+	status = buffer->output[1];
+
+	if (ret != 0)
+		goto out;
+
+	clear_buffer();
+
+	buffer->input[0] = 0x2;
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
+	hwswitch = buffer->output[1];
 
 	/* If the hardware switch controls this radio, and the hardware
 	   switch is disabled, always disable the radio */
-	if ((hwswitch_state & BIT(hwswitch_bit)) &&
-	    !(buffer->output[1] & BIT(16)))
+	if (ret == 0 && (hwswitch & BIT(hwswitch_bit)) &&
+	    (status & BIT(0)) && !(status & BIT(16)))
 		disable = 1;
 
+	clear_buffer();
+
 	buffer->input[0] = (1 | (radio<<8) | (disable << 16));
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
 
+ out:
 	release_buffer();
-	return 0;
+	return dell_smi_error(ret);
 }
 
 /* Must be called with the buffer held */
@@ -490,6 +595,7 @@ static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio,
 	if (status & BIT(0)) {
 		/* Has hw-switch, sync sw_state to BIOS */
 		int block = rfkill_blocked(rfkill);
+		clear_buffer();
 		buffer->input[0] = (1 | (radio << 8) | (block << 16));
 		dell_send_request(buffer, 17, 11);
 	} else {
@@ -499,23 +605,43 @@ static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio,
 }
 
 static void dell_rfkill_update_hw_state(struct rfkill *rfkill, int radio,
-					int status)
+					int status, int hwswitch)
 {
-	if (hwswitch_state & (BIT(radio - 1)))
+	if (hwswitch & (BIT(radio - 1)))
 		rfkill_set_hw_state(rfkill, !(status & BIT(16)));
 }
 
 static void dell_rfkill_query(struct rfkill *rfkill, void *data)
 {
+	int radio = ((unsigned long)data & 0xF);
+	int hwswitch;
 	int status;
+	int ret;
 
 	get_buffer();
+
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
 	status = buffer->output[1];
 
-	dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status);
+	if (ret != 0 || !(status & BIT(0))) {
+		release_buffer();
+		return;
+	}
+
+	clear_buffer();
+
+	buffer->input[0] = 0x2;
+	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
+	hwswitch = buffer->output[1];
 
 	release_buffer();
+
+	if (ret != 0)
+		return;
+
+	dell_rfkill_update_hw_state(rfkill, radio, status, hwswitch);
 }
 
 static const struct rfkill_ops dell_rfkill_ops = {
@@ -527,13 +653,27 @@ static struct dentry *dell_laptop_dir;
 
 static int dell_debugfs_show(struct seq_file *s, void *data)
 {
+	int hwswitch_state;
+	int hwswitch_ret;
 	int status;
+	int ret;
 
 	get_buffer();
+
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
 	status = buffer->output[1];
+
+	clear_buffer();
+
+	buffer->input[0] = 0x2;
+	dell_send_request(buffer, 17, 11);
+	hwswitch_ret = buffer->output[0];
+	hwswitch_state = buffer->output[1];
+
 	release_buffer();
 
+	seq_printf(s, "return:\t%d\n", ret);
 	seq_printf(s, "status:\t0x%X\n", status);
 	seq_printf(s, "Bit 0 : Hardware switch supported:   %lu\n",
 		   status & BIT(0));
@@ -547,12 +687,21 @@ static int dell_debugfs_show(struct seq_file *s, void *data)
 		  (status & BIT(4)) >> 4);
 	seq_printf(s, "Bit 5 : Wireless keyboard supported: %lu\n",
 		  (status & BIT(5)) >> 5);
+	seq_printf(s, "Bit 6 : UWB supported:               %lu\n",
+		  (status & BIT(6)) >> 6);
+	seq_printf(s, "Bit 7 : WiGig supported:             %lu\n",
+		  (status & BIT(7)) >> 7);
 	seq_printf(s, "Bit 8 : Wifi is installed:           %lu\n",
 		  (status & BIT(8)) >> 8);
 	seq_printf(s, "Bit 9 : Bluetooth is installed:      %lu\n",
 		  (status & BIT(9)) >> 9);
 	seq_printf(s, "Bit 10: WWAN is installed:           %lu\n",
 		  (status & BIT(10)) >> 10);
+	seq_printf(s, "Bit 11: UWB installed:               %lu\n",
+		  (status & BIT(11)) >> 11);
+	seq_printf(s, "Bit 12: WiGig installed:             %lu\n",
+		  (status & BIT(12)) >> 12);
+
 	seq_printf(s, "Bit 16: Hardware switch is on:       %lu\n",
 		  (status & BIT(16)) >> 16);
 	seq_printf(s, "Bit 17: Wifi is blocked:             %lu\n",
@@ -561,14 +710,23 @@ static int dell_debugfs_show(struct seq_file *s, void *data)
 		  (status & BIT(18)) >> 18);
 	seq_printf(s, "Bit 19: WWAN is blocked:             %lu\n",
 		  (status & BIT(19)) >> 19);
+	seq_printf(s, "Bit 20: UWB is blocked:              %lu\n",
+		  (status & BIT(20)) >> 20);
+	seq_printf(s, "Bit 21: WiGig is blocked:            %lu\n",
+		  (status & BIT(21)) >> 21);
 
-	seq_printf(s, "\nhwswitch_state:\t0x%X\n", hwswitch_state);
+	seq_printf(s, "\nhwswitch_return:\t%d\n", hwswitch_ret);
+	seq_printf(s, "hwswitch_state:\t0x%X\n", hwswitch_state);
 	seq_printf(s, "Bit 0 : Wifi controlled by switch:      %lu\n",
 		   hwswitch_state & BIT(0));
 	seq_printf(s, "Bit 1 : Bluetooth controlled by switch: %lu\n",
 		   (hwswitch_state & BIT(1)) >> 1);
 	seq_printf(s, "Bit 2 : WWAN controlled by switch:      %lu\n",
 		   (hwswitch_state & BIT(2)) >> 2);
+	seq_printf(s, "Bit 3 : UWB controlled by switch:       %lu\n",
+		   (hwswitch_state & BIT(3)) >> 3);
+	seq_printf(s, "Bit 4 : WiGig controlled by switch:     %lu\n",
+		   (hwswitch_state & BIT(4)) >> 4);
 	seq_printf(s, "Bit 7 : Wireless switch config locked:  %lu\n",
 		   (hwswitch_state & BIT(7)) >> 7);
 	seq_printf(s, "Bit 8 : Wifi locator enabled:           %lu\n",
@@ -594,25 +752,43 @@ static const struct file_operations dell_debugfs_fops = {
 
 static void dell_update_rfkill(struct work_struct *ignored)
 {
+	int hwswitch = 0;
 	int status;
+	int ret;
 
 	get_buffer();
+
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
 	status = buffer->output[1];
 
+	if (ret != 0)
+		goto out;
+
+	clear_buffer();
+
+	buffer->input[0] = 0x2;
+	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
+
+	if (ret == 0 && (status & BIT(0)))
+		hwswitch = buffer->output[1];
+
 	if (wifi_rfkill) {
-		dell_rfkill_update_hw_state(wifi_rfkill, 1, status);
+		dell_rfkill_update_hw_state(wifi_rfkill, 1, status, hwswitch);
 		dell_rfkill_update_sw_state(wifi_rfkill, 1, status);
 	}
 	if (bluetooth_rfkill) {
-		dell_rfkill_update_hw_state(bluetooth_rfkill, 2, status);
+		dell_rfkill_update_hw_state(bluetooth_rfkill, 2, status,
+					    hwswitch);
 		dell_rfkill_update_sw_state(bluetooth_rfkill, 2, status);
 	}
 	if (wwan_rfkill) {
-		dell_rfkill_update_hw_state(wwan_rfkill, 3, status);
+		dell_rfkill_update_hw_state(wwan_rfkill, 3, status, hwswitch);
 		dell_rfkill_update_sw_state(wwan_rfkill, 3, status);
 	}
 
+ out:
 	release_buffer();
 }
 static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill);
@@ -641,6 +817,20 @@ static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
 	return false;
 }
 
+static int (*dell_rbtn_notifier_register_func)(struct notifier_block *);
+static int (*dell_rbtn_notifier_unregister_func)(struct notifier_block *);
+
+static int dell_laptop_rbtn_notifier_call(struct notifier_block *nb,
+					  unsigned long action, void *data)
+{
+	schedule_delayed_work(&dell_rfkill_work, 0);
+	return NOTIFY_OK;
+}
+
+static struct notifier_block dell_laptop_rbtn_notifier = {
+	.notifier_call = dell_laptop_rbtn_notifier_call,
+};
+
 static int __init dell_setup_rfkill(void)
 {
 	int status, ret, whitelisted;
@@ -660,21 +850,17 @@ static int __init dell_setup_rfkill(void)
 
 	get_buffer();
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
 	status = buffer->output[1];
-	buffer->input[0] = 0x2;
-	dell_send_request(buffer, 17, 11);
-	hwswitch_state = buffer->output[1];
 	release_buffer();
 
-	if (!(status & BIT(0))) {
-		if (force_rfkill) {
-			/* No hwsitch, clear all hw-controlled bits */
-			hwswitch_state &= ~7;
-		} else {
-			/* rfkill is only tested on laptops with a hwswitch */
-			return 0;
-		}
-	}
+	/* dell wireless info smbios call is not supported */
+	if (ret != 0)
+		return 0;
+
+	/* rfkill is only tested on laptops with a hwswitch */
+	if (!(status & BIT(0)) && !force_rfkill)
+		return 0;
 
 	if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) {
 		wifi_rfkill = rfkill_alloc("dell-wifi", &platform_device->dev,
@@ -717,10 +903,62 @@ static int __init dell_setup_rfkill(void)
 			goto err_wwan;
 	}
 
-	ret = i8042_install_filter(dell_laptop_i8042_filter);
-	if (ret) {
-		pr_warn("Unable to install key filter\n");
+	/*
+	 * Dell Airplane Mode Switch driver (dell-rbtn) supports ACPI devices
+	 * which can receive events from HW slider switch.
+	 *
+	 * Dell SMBIOS on whitelisted models supports controlling radio devices
+	 * but does not support receiving HW button switch events. We can use
+	 * i8042 filter hook function to receive keyboard data and handle
+	 * keycode for HW button.
+	 *
+	 * So if it is possible we will use Dell Airplane Mode Switch ACPI
+	 * driver for receiving HW events and Dell SMBIOS for setting rfkill
+	 * states. If ACPI driver or device is not available we will fallback to
+	 * i8042 filter hook function.
+	 *
+	 * To prevent duplicate rfkill devices which control and do same thing,
+	 * dell-rbtn driver will automatically remove its own rfkill devices
+	 * once function dell_rbtn_notifier_register() is called.
+	 */
+
+	dell_rbtn_notifier_register_func =
+		symbol_request(dell_rbtn_notifier_register);
+	if (dell_rbtn_notifier_register_func) {
+		dell_rbtn_notifier_unregister_func =
+			symbol_request(dell_rbtn_notifier_unregister);
+		if (!dell_rbtn_notifier_unregister_func) {
+			symbol_put(dell_rbtn_notifier_register);
+			dell_rbtn_notifier_register_func = NULL;
+		}
+	}
+
+	if (dell_rbtn_notifier_register_func) {
+		ret = dell_rbtn_notifier_register_func(
+			&dell_laptop_rbtn_notifier);
+		symbol_put(dell_rbtn_notifier_register);
+		dell_rbtn_notifier_register_func = NULL;
+		if (ret != 0) {
+			symbol_put(dell_rbtn_notifier_unregister);
+			dell_rbtn_notifier_unregister_func = NULL;
+		}
+	} else {
+		pr_info("Symbols from dell-rbtn acpi driver are not available\n");
+		ret = -ENODEV;
+	}
+
+	if (ret == 0) {
+		pr_info("Using dell-rbtn acpi driver for receiving events\n");
+	} else if (ret != -ENODEV) {
+		pr_warn("Unable to register dell rbtn notifier\n");
 		goto err_filter;
+	} else {
+		ret = i8042_install_filter(dell_laptop_i8042_filter);
+		if (ret) {
+			pr_warn("Unable to install key filter\n");
+			goto err_filter;
+		}
+		pr_info("Using i8042 filter function for receiving events\n");
 	}
 
 	return 0;
@@ -743,6 +981,14 @@ err_wifi:
 
 static void dell_cleanup_rfkill(void)
 {
+	if (dell_rbtn_notifier_unregister_func) {
+		dell_rbtn_notifier_unregister_func(&dell_laptop_rbtn_notifier);
+		symbol_put(dell_rbtn_notifier_unregister);
+		dell_rbtn_notifier_unregister_func = NULL;
+	} else {
+		i8042_remove_filter(dell_laptop_i8042_filter);
+	}
+	cancel_delayed_work_sync(&dell_rfkill_work);
 	if (wifi_rfkill) {
 		rfkill_unregister(wifi_rfkill);
 		rfkill_destroy(wifi_rfkill);
@@ -759,47 +1005,50 @@ static void dell_cleanup_rfkill(void)
 
 static int dell_send_intensity(struct backlight_device *bd)
 {
-	int ret = 0;
+	int token;
+	int ret;
+
+	token = find_token_location(BRIGHTNESS_TOKEN);
+	if (token == -1)
+		return -ENODEV;
 
 	get_buffer();
-	buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN);
+	buffer->input[0] = token;
 	buffer->input[1] = bd->props.brightness;
 
-	if (buffer->input[0] == -1) {
-		ret = -ENODEV;
-		goto out;
-	}
-
 	if (power_supply_is_system_supplied() > 0)
 		dell_send_request(buffer, 1, 2);
 	else
 		dell_send_request(buffer, 1, 1);
 
- out:
+	ret = dell_smi_error(buffer->output[0]);
+
 	release_buffer();
 	return ret;
 }
 
 static int dell_get_intensity(struct backlight_device *bd)
 {
-	int ret = 0;
+	int token;
+	int ret;
 
-	get_buffer();
-	buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN);
+	token = find_token_location(BRIGHTNESS_TOKEN);
+	if (token == -1)
+		return -ENODEV;
 
-	if (buffer->input[0] == -1) {
-		ret = -ENODEV;
-		goto out;
-	}
+	get_buffer();
+	buffer->input[0] = token;
 
 	if (power_supply_is_system_supplied() > 0)
 		dell_send_request(buffer, 0, 2);
 	else
 		dell_send_request(buffer, 0, 1);
 
-	ret = buffer->output[1];
+	if (buffer->output[0])
+		ret = dell_smi_error(buffer->output[0]);
+	else
+		ret = buffer->output[1];
 
- out:
 	release_buffer();
 	return ret;
 }
@@ -1863,6 +2112,7 @@ static void kbd_led_exit(void)
 static int __init dell_init(void)
 {
 	int max_intensity = 0;
+	int token;
 	int ret;
 
 	if (!dmi_check_system(dell_device_table))
@@ -1918,21 +2168,18 @@ static int __init dell_init(void)
 		debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL,
 				    &dell_debugfs_fops);
 
-#ifdef CONFIG_ACPI
-	/* In the event of an ACPI backlight being available, don't
-	 * register the platform controller.
-	 */
-	if (acpi_video_backlight_support())
+	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
 		return 0;
-#endif
 
-	get_buffer();
-	buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN);
-	if (buffer->input[0] != -1) {
+	token = find_token_location(BRIGHTNESS_TOKEN);
+	if (token != -1) {
+		get_buffer();
+		buffer->input[0] = token;
 		dell_send_request(buffer, 0, 2);
-		max_intensity = buffer->output[3];
+		if (buffer->output[0] == 0)
+			max_intensity = buffer->output[3];
+		release_buffer();
 	}
-	release_buffer();
 
 	if (max_intensity) {
 		struct backlight_properties props;
@@ -1959,8 +2206,6 @@ static int __init dell_init(void)
 	return 0;
 
 fail_backlight:
-	i8042_remove_filter(dell_laptop_i8042_filter);
-	cancel_delayed_work_sync(&dell_rfkill_work);
 	dell_cleanup_rfkill();
 fail_rfkill:
 	free_page((unsigned long)buffer);
@@ -1981,8 +2226,6 @@ static void __exit dell_exit(void)
 	if (quirks && quirks->touchpad_led)
 		touchpad_led_exit();
 	kbd_led_exit();
-	i8042_remove_filter(dell_laptop_i8042_filter);
-	cancel_delayed_work_sync(&dell_rfkill_work);
 	backlight_device_unregister(dell_backlight_device);
 	dell_cleanup_rfkill();
 	if (platform_device) {
@@ -1993,7 +2236,14 @@ static void __exit dell_exit(void)
 	free_page((unsigned long)buffer);
 }
 
-module_init(dell_init);
+/* dell-rbtn.c driver export functions which will not work correctly (and could
+ * cause kernel crash) if they are called before dell-rbtn.c init code. This is
+ * not problem when dell-rbtn.c is compiled as external module. When both files
+ * (dell-rbtn.c and dell-laptop.c) are compiled statically into kernel, then we
+ * need to ensure that dell_init() will be called after initializing dell-rbtn.
+ * This can be achieved by late_initcall() instead module_init().
+ */
+late_initcall(dell_init);
 module_exit(dell_exit);
 
 MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
diff --git a/kernel/drivers/platform/x86/dell-rbtn.c b/kernel/drivers/platform/x86/dell-rbtn.c
new file mode 100644
index 000000000..cd410e392
--- /dev/null
+++ b/kernel/drivers/platform/x86/dell-rbtn.c
@@ -0,0 +1,423 @@
+/*
+    Dell Airplane Mode Switch driver
+    Copyright (C) 2014-2015  Pali Rohár <pali.rohar@gmail.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/rfkill.h>
+#include <linux/input.h>
+
+enum rbtn_type {
+	RBTN_UNKNOWN,
+	RBTN_TOGGLE,
+	RBTN_SLIDER,
+};
+
+struct rbtn_data {
+	enum rbtn_type type;
+	struct rfkill *rfkill;
+	struct input_dev *input_dev;
+};
+
+
+/*
+ * acpi functions
+ */
+
+static enum rbtn_type rbtn_check(struct acpi_device *device)
+{
+	unsigned long long output;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(device->handle, "CRBT", NULL, &output);
+	if (ACPI_FAILURE(status))
+		return RBTN_UNKNOWN;
+
+	switch (output) {
+	case 0:
+	case 1:
+		return RBTN_TOGGLE;
+	case 2:
+	case 3:
+		return RBTN_SLIDER;
+	default:
+		return RBTN_UNKNOWN;
+	}
+}
+
+static int rbtn_get(struct acpi_device *device)
+{
+	unsigned long long output;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(device->handle, "GRBT", NULL, &output);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return !output;
+}
+
+static int rbtn_acquire(struct acpi_device *device, bool enable)
+{
+	struct acpi_object_list input;
+	union acpi_object param;
+	acpi_status status;
+
+	param.type = ACPI_TYPE_INTEGER;
+	param.integer.value = enable;
+	input.count = 1;
+	input.pointer = &param;
+
+	status = acpi_evaluate_object(device->handle, "ARBT", &input, NULL);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return 0;
+}
+
+
+/*
+ * rfkill device
+ */
+
+static void rbtn_rfkill_query(struct rfkill *rfkill, void *data)
+{
+	struct acpi_device *device = data;
+	int state;
+
+	state = rbtn_get(device);
+	if (state < 0)
+		return;
+
+	rfkill_set_states(rfkill, state, state);
+}
+
+static int rbtn_rfkill_set_block(void *data, bool blocked)
+{
+	/* NOTE: setting soft rfkill state is not supported */
+	return -EINVAL;
+}
+
+static struct rfkill_ops rbtn_ops = {
+	.query = rbtn_rfkill_query,
+	.set_block = rbtn_rfkill_set_block,
+};
+
+static int rbtn_rfkill_init(struct acpi_device *device)
+{
+	struct rbtn_data *rbtn_data = device->driver_data;
+	int ret;
+
+	if (rbtn_data->rfkill)
+		return 0;
+
+	/*
+	 * NOTE: rbtn controls all radio devices, not only WLAN
+	 *       but rfkill interface does not support "ANY" type
+	 *       so "WLAN" type is used
+	 */
+	rbtn_data->rfkill = rfkill_alloc("dell-rbtn", &device->dev,
+					 RFKILL_TYPE_WLAN, &rbtn_ops, device);
+	if (!rbtn_data->rfkill)
+		return -ENOMEM;
+
+	ret = rfkill_register(rbtn_data->rfkill);
+	if (ret) {
+		rfkill_destroy(rbtn_data->rfkill);
+		rbtn_data->rfkill = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
+static void rbtn_rfkill_exit(struct acpi_device *device)
+{
+	struct rbtn_data *rbtn_data = device->driver_data;
+
+	if (!rbtn_data->rfkill)
+		return;
+
+	rfkill_unregister(rbtn_data->rfkill);
+	rfkill_destroy(rbtn_data->rfkill);
+	rbtn_data->rfkill = NULL;
+}
+
+static void rbtn_rfkill_event(struct acpi_device *device)
+{
+	struct rbtn_data *rbtn_data = device->driver_data;
+
+	if (rbtn_data->rfkill)
+		rbtn_rfkill_query(rbtn_data->rfkill, device);
+}
+
+
+/*
+ * input device
+ */
+
+static int rbtn_input_init(struct rbtn_data *rbtn_data)
+{
+	int ret;
+
+	rbtn_data->input_dev = input_allocate_device();
+	if (!rbtn_data->input_dev)
+		return -ENOMEM;
+
+	rbtn_data->input_dev->name = "DELL Wireless hotkeys";
+	rbtn_data->input_dev->phys = "dellabce/input0";
+	rbtn_data->input_dev->id.bustype = BUS_HOST;
+	rbtn_data->input_dev->evbit[0] = BIT(EV_KEY);
+	set_bit(KEY_RFKILL, rbtn_data->input_dev->keybit);
+
+	ret = input_register_device(rbtn_data->input_dev);
+	if (ret) {
+		input_free_device(rbtn_data->input_dev);
+		rbtn_data->input_dev = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
+static void rbtn_input_exit(struct rbtn_data *rbtn_data)
+{
+	input_unregister_device(rbtn_data->input_dev);
+	rbtn_data->input_dev = NULL;
+}
+
+static void rbtn_input_event(struct rbtn_data *rbtn_data)
+{
+	input_report_key(rbtn_data->input_dev, KEY_RFKILL, 1);
+	input_sync(rbtn_data->input_dev);
+	input_report_key(rbtn_data->input_dev, KEY_RFKILL, 0);
+	input_sync(rbtn_data->input_dev);
+}
+
+
+/*
+ * acpi driver
+ */
+
+static int rbtn_add(struct acpi_device *device);
+static int rbtn_remove(struct acpi_device *device);
+static void rbtn_notify(struct acpi_device *device, u32 event);
+
+static const struct acpi_device_id rbtn_ids[] = {
+	{ "DELRBTN", 0 },
+	{ "DELLABCE", 0 },
+	{ "", 0 },
+};
+
+static struct acpi_driver rbtn_driver = {
+	.name = "dell-rbtn",
+	.ids = rbtn_ids,
+	.ops = {
+		.add = rbtn_add,
+		.remove = rbtn_remove,
+		.notify = rbtn_notify,
+	},
+	.owner = THIS_MODULE,
+};
+
+
+/*
+ * notifier export functions
+ */
+
+static bool auto_remove_rfkill = true;
+
+static ATOMIC_NOTIFIER_HEAD(rbtn_chain_head);
+
+static int rbtn_inc_count(struct device *dev, void *data)
+{
+	struct acpi_device *device = to_acpi_device(dev);
+	struct rbtn_data *rbtn_data = device->driver_data;
+	int *count = data;
+
+	if (rbtn_data->type == RBTN_SLIDER)
+		(*count)++;
+
+	return 0;
+}
+
+static int rbtn_switch_dev(struct device *dev, void *data)
+{
+	struct acpi_device *device = to_acpi_device(dev);
+	struct rbtn_data *rbtn_data = device->driver_data;
+	bool enable = data;
+
+	if (rbtn_data->type != RBTN_SLIDER)
+		return 0;
+
+	if (enable)
+		rbtn_rfkill_init(device);
+	else
+		rbtn_rfkill_exit(device);
+
+	return 0;
+}
+
+int dell_rbtn_notifier_register(struct notifier_block *nb)
+{
+	bool first;
+	int count;
+	int ret;
+
+	count = 0;
+	ret = driver_for_each_device(&rbtn_driver.drv, NULL, &count,
+				     rbtn_inc_count);
+	if (ret || count == 0)
+		return -ENODEV;
+
+	first = !rbtn_chain_head.head;
+
+	ret = atomic_notifier_chain_register(&rbtn_chain_head, nb);
+	if (ret != 0)
+		return ret;
+
+	if (auto_remove_rfkill && first)
+		ret = driver_for_each_device(&rbtn_driver.drv, NULL,
+					     (void *)false, rbtn_switch_dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dell_rbtn_notifier_register);
+
+int dell_rbtn_notifier_unregister(struct notifier_block *nb)
+{
+	int ret;
+
+	ret = atomic_notifier_chain_unregister(&rbtn_chain_head, nb);
+	if (ret != 0)
+		return ret;
+
+	if (auto_remove_rfkill && !rbtn_chain_head.head)
+		ret = driver_for_each_device(&rbtn_driver.drv, NULL,
+					     (void *)true, rbtn_switch_dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dell_rbtn_notifier_unregister);
+
+
+/*
+ * acpi driver functions
+ */
+
+static int rbtn_add(struct acpi_device *device)
+{
+	struct rbtn_data *rbtn_data;
+	enum rbtn_type type;
+	int ret = 0;
+
+	type = rbtn_check(device);
+	if (type == RBTN_UNKNOWN) {
+		dev_info(&device->dev, "Unknown device type\n");
+		return -EINVAL;
+	}
+
+	ret = rbtn_acquire(device, true);
+	if (ret < 0) {
+		dev_err(&device->dev, "Cannot enable device\n");
+		return ret;
+	}
+
+	rbtn_data = devm_kzalloc(&device->dev, sizeof(*rbtn_data), GFP_KERNEL);
+	if (!rbtn_data)
+		return -ENOMEM;
+
+	rbtn_data->type = type;
+	device->driver_data = rbtn_data;
+
+	switch (rbtn_data->type) {
+	case RBTN_TOGGLE:
+		ret = rbtn_input_init(rbtn_data);
+		break;
+	case RBTN_SLIDER:
+		if (auto_remove_rfkill && rbtn_chain_head.head)
+			ret = 0;
+		else
+			ret = rbtn_rfkill_init(device);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+
+}
+
+static int rbtn_remove(struct acpi_device *device)
+{
+	struct rbtn_data *rbtn_data = device->driver_data;
+
+	switch (rbtn_data->type) {
+	case RBTN_TOGGLE:
+		rbtn_input_exit(rbtn_data);
+		break;
+	case RBTN_SLIDER:
+		rbtn_rfkill_exit(device);
+		break;
+	default:
+		break;
+	}
+
+	rbtn_acquire(device, false);
+	device->driver_data = NULL;
+
+	return 0;
+}
+
+static void rbtn_notify(struct acpi_device *device, u32 event)
+{
+	struct rbtn_data *rbtn_data = device->driver_data;
+
+	if (event != 0x80) {
+		dev_info(&device->dev, "Received unknown event (0x%x)\n",
+			 event);
+		return;
+	}
+
+	switch (rbtn_data->type) {
+	case RBTN_TOGGLE:
+		rbtn_input_event(rbtn_data);
+		break;
+	case RBTN_SLIDER:
+		rbtn_rfkill_event(device);
+		atomic_notifier_call_chain(&rbtn_chain_head, event, device);
+		break;
+	default:
+		break;
+	}
+}
+
+
+/*
+ * module functions
+ */
+
+module_acpi_driver(rbtn_driver);
+
+module_param(auto_remove_rfkill, bool, 0444);
+
+MODULE_PARM_DESC(auto_remove_rfkill, "Automatically remove rfkill devices when "
+				     "other modules start receiving events "
+				     "from this module and re-add them when "
+				     "the last module stops receiving events "
+				     "(default true)");
+MODULE_DEVICE_TABLE(acpi, rbtn_ids);
+MODULE_DESCRIPTION("Dell Airplane Mode Switch driver");
+MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/platform/x86/dell-rbtn.h b/kernel/drivers/platform/x86/dell-rbtn.h
new file mode 100644
index 000000000..c59cc6b8e
--- /dev/null
+++ b/kernel/drivers/platform/x86/dell-rbtn.h
@@ -0,0 +1,24 @@
+/*
+    Dell Airplane Mode Switch driver
+    Copyright (C) 2014-2015  Pali Rohár <pali.rohar@gmail.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+#ifndef _DELL_RBTN_H_
+#define _DELL_RBTN_H_
+
+struct notifier_block;
+
+int dell_rbtn_notifier_register(struct notifier_block *nb);
+int dell_rbtn_notifier_unregister(struct notifier_block *nb);
+
+#endif
diff --git a/kernel/drivers/platform/x86/dell-wmi.c b/kernel/drivers/platform/x86/dell-wmi.c
index 6512a06bc..f2d77fe69 100644
--- a/kernel/drivers/platform/x86/dell-wmi.c
+++ b/kernel/drivers/platform/x86/dell-wmi.c
@@ -35,6 +35,7 @@
 #include <linux/acpi.h>
 #include <linux/string.h>
 #include <linux/dmi.h>
+#include <acpi/video.h>
 
 MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
 MODULE_DESCRIPTION("Dell laptop WMI hotkeys driver");
@@ -397,7 +398,7 @@ static int __init dell_wmi_init(void)
 	}
 
 	dmi_walk(find_hk_type, NULL);
-	acpi_video = acpi_video_backlight_support();
+	acpi_video = acpi_video_get_backlight_type() != acpi_backlight_vendor;
 
 	err = dell_wmi_input_setup();
 	if (err)
diff --git a/kernel/drivers/platform/x86/eeepc-laptop.c b/kernel/drivers/platform/x86/eeepc-laptop.c
index 844c2096b..8cdf315f9 100644
--- a/kernel/drivers/platform/x86/eeepc-laptop.c
+++ b/kernel/drivers/platform/x86/eeepc-laptop.c
@@ -37,6 +37,7 @@
 #include <linux/pci_hotplug.h>
 #include <linux/leds.h>
 #include <linux/dmi.h>
+#include <acpi/video.h>
 
 #define EEEPC_LAPTOP_VERSION	"0.1"
 #define EEEPC_LAPTOP_NAME	"Eee PC Hotkey Driver"
@@ -1433,12 +1434,10 @@ static int eeepc_acpi_add(struct acpi_device *device)
 	if (result)
 		goto fail_platform;
 
-	if (!acpi_video_backlight_support()) {
+	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		result = eeepc_backlight_init(eeepc);
 		if (result)
 			goto fail_backlight;
-	} else {
-		pr_info("Backlight controlled by ACPI video driver\n");
 	}
 
 	result = eeepc_input_init(eeepc);
diff --git a/kernel/drivers/platform/x86/fujitsu-laptop.c b/kernel/drivers/platform/x86/fujitsu-laptop.c
index 2a9afa261..1c62caff9 100644
--- a/kernel/drivers/platform/x86/fujitsu-laptop.c
+++ b/kernel/drivers/platform/x86/fujitsu-laptop.c
@@ -72,6 +72,7 @@
 #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
 #include <linux/leds.h>
 #endif
+#include <acpi/video.h>
 
 #define FUJITSU_DRIVER_VERSION "0.6.0"
 
@@ -1099,7 +1100,7 @@ static int __init fujitsu_init(void)
 
 	/* Register backlight stuff */
 
-	if (!acpi_video_backlight_support()) {
+	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		struct backlight_properties props;
 
 		memset(&props, 0, sizeof(struct backlight_properties));
@@ -1137,8 +1138,7 @@ static int __init fujitsu_init(void)
 	}
 
 	/* Sync backlight power status (needs FUJ02E3 device, hence deferred) */
-
-	if (!acpi_video_backlight_support()) {
+	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		if (call_fext_func(FUNC_BACKLIGHT, 0x2, 0x4, 0x0) == 3)
 			fujitsu->bl_device->props.power = FB_BLANK_POWERDOWN;
 		else
diff --git a/kernel/drivers/platform/x86/hp-wireless.c b/kernel/drivers/platform/x86/hp-wireless.c
index 4e4cc8bd7..988eedbd7 100644
--- a/kernel/drivers/platform/x86/hp-wireless.c
+++ b/kernel/drivers/platform/x86/hp-wireless.c
@@ -114,14 +114,9 @@ static int __init hpwl_init(void)
 
 	pr_info("Initializing HPQ6001 module\n");
 	err = acpi_bus_register_driver(&hpwl_driver);
-	if (err) {
+	if (err)
 		pr_err("Unable to register HP wireless control driver.\n");
-		goto error_acpi_register;
-	}
-
-	return 0;
 
-error_acpi_register:
 	return err;
 }
 
diff --git a/kernel/drivers/platform/x86/ibm_rtl.c b/kernel/drivers/platform/x86/ibm_rtl.c
index 97c2be195..c62e5e11c 100644
--- a/kernel/drivers/platform/x86/ibm_rtl.c
+++ b/kernel/drivers/platform/x86/ibm_rtl.c
@@ -33,7 +33,7 @@
 #include <linux/mutex.h>
 #include <asm/bios_ebda.h>
 
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 
 static bool force;
 module_param(force, bool, 0);
diff --git a/kernel/drivers/platform/x86/ideapad-laptop.c b/kernel/drivers/platform/x86/ideapad-laptop.c
index cd78f1166..d78ee151c 100644
--- a/kernel/drivers/platform/x86/ideapad-laptop.c
+++ b/kernel/drivers/platform/x86/ideapad-laptop.c
@@ -38,6 +38,7 @@
 #include <linux/i8042.h>
 #include <linux/dmi.h>
 #include <linux/device.h>
+#include <acpi/video.h>
 
 #define IDEAPAD_RFKILL_DEV_NUM	(3)
 
@@ -46,6 +47,10 @@
 #define CFG_WIFI_BIT	(18)
 #define CFG_CAMERA_BIT	(19)
 
+#if IS_ENABLED(CONFIG_ACPI_WMI)
+static const char ideapad_wmi_fnesc_event[] = "26CAB2E5-5CF1-46AE-AAC3-4A12B6BA50E6";
+#endif
+
 enum {
 	VPCCMD_R_VPC1 = 0x10,
 	VPCCMD_R_BL_MAX,
@@ -566,6 +571,8 @@ static const struct key_entry ideapad_keymap[] = {
 	{ KE_KEY, 65, { KEY_PROG4 } },
 	{ KE_KEY, 66, { KEY_TOUCHPAD_OFF } },
 	{ KE_KEY, 67, { KEY_TOUCHPAD_ON } },
+	{ KE_KEY, 128, { KEY_ESC } },
+
 	{ KE_END, 0 },
 };
 
@@ -824,6 +831,19 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data)
 	}
 }
 
+#if IS_ENABLED(CONFIG_ACPI_WMI)
+static void ideapad_wmi_notify(u32 value, void *context)
+{
+	switch (value) {
+	case 128:
+		ideapad_input_report(context, value);
+		break;
+	default:
+		pr_info("Unknown WMI event %u\n", value);
+	}
+}
+#endif
+
 /*
  * Some ideapads don't have a hardware rfkill switch, reading VPCCMD_R_RF
  * always results in 0 on these models, causing ideapad_laptop to wrongly
@@ -845,6 +865,13 @@ static const struct dmi_system_id no_hw_rfkill_list[] = {
 		},
 	},
 	{
+		.ident = "Lenovo ideapad Y700-17ISK",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-17ISK"),
+		},
+	},
+	{
 		.ident = "Lenovo Yoga 2 11 / 13 / Pro",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
@@ -852,17 +879,38 @@ static const struct dmi_system_id no_hw_rfkill_list[] = {
 		},
 	},
 	{
-		.ident = "Lenovo Yoga 3 14",
+		.ident = "Lenovo Yoga 2 11 / 13 / Pro",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "Yoga2"),
+		},
+	},
+	{
+		.ident = "Lenovo Yoga 3 1170 / 1470",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 3 14"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 3"),
 		},
 	},
 	{
 		.ident = "Lenovo Yoga 3 Pro 1370",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 3 Pro-1370"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 3"),
+		},
+	},
+	{
+		.ident = "Lenovo Yoga 700",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 700"),
+		},
+	},
+	{
+		.ident = "Lenovo Yoga 900",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 900"),
 		},
 	},
 	{}
@@ -918,7 +966,7 @@ static int ideapad_acpi_add(struct platform_device *pdev)
 	ideapad_sync_rfk_state(priv);
 	ideapad_sync_touchpad_state(priv);
 
-	if (!acpi_video_backlight_support()) {
+	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		ret = ideapad_backlight_init(priv);
 		if (ret && ret != -ENODEV)
 			goto backlight_failed;
@@ -927,8 +975,18 @@ static int ideapad_acpi_add(struct platform_device *pdev)
 		ACPI_DEVICE_NOTIFY, ideapad_acpi_notify, priv);
 	if (ret)
 		goto notification_failed;
+#if IS_ENABLED(CONFIG_ACPI_WMI)
+	ret = wmi_install_notify_handler(ideapad_wmi_fnesc_event, ideapad_wmi_notify, priv);
+	if (ret != AE_OK && ret != AE_NOT_EXIST)
+		goto notification_failed_wmi;
+#endif
 
 	return 0;
+#if IS_ENABLED(CONFIG_ACPI_WMI)
+notification_failed_wmi:
+	acpi_remove_notify_handler(priv->adev->handle,
+		ACPI_DEVICE_NOTIFY, ideapad_acpi_notify);
+#endif
 notification_failed:
 	ideapad_backlight_exit(priv);
 backlight_failed:
@@ -947,6 +1005,9 @@ static int ideapad_acpi_remove(struct platform_device *pdev)
 	struct ideapad_private *priv = dev_get_drvdata(&pdev->dev);
 	int i;
 
+#if IS_ENABLED(CONFIG_ACPI_WMI)
+	wmi_remove_notify_handler(ideapad_wmi_fnesc_event);
+#endif
 	acpi_remove_notify_handler(priv->adev->handle,
 		ACPI_DEVICE_NOTIFY, ideapad_acpi_notify);
 	ideapad_backlight_exit(priv);
diff --git a/kernel/drivers/platform/x86/intel_ips.c b/kernel/drivers/platform/x86/intel_ips.c
index e2065e06a..55663b3d7 100644
--- a/kernel/drivers/platform/x86/intel_ips.c
+++ b/kernel/drivers/platform/x86/intel_ips.c
@@ -78,7 +78,7 @@
 #include <asm/processor.h>
 #include "intel_ips.h"
 
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 
 #define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
 
diff --git a/kernel/drivers/platform/x86/intel_menlow.c b/kernel/drivers/platform/x86/intel_menlow.c
index e8b46d2c4..0a919d816 100644
--- a/kernel/drivers/platform/x86/intel_menlow.c
+++ b/kernel/drivers/platform/x86/intel_menlow.c
@@ -315,7 +315,7 @@ static ssize_t aux0_show(struct device *dev,
 
 	result = sensor_get_auxtrip(attr->handle, 0, &value);
 
-	return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value));
+	return result ? result : sprintf(buf, "%lu", DECI_KELVIN_TO_CELSIUS(value));
 }
 
 static ssize_t aux1_show(struct device *dev,
@@ -327,7 +327,7 @@ static ssize_t aux1_show(struct device *dev,
 
 	result = sensor_get_auxtrip(attr->handle, 1, &value);
 
-	return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value));
+	return result ? result : sprintf(buf, "%lu", DECI_KELVIN_TO_CELSIUS(value));
 }
 
 static ssize_t aux0_store(struct device *dev,
@@ -345,7 +345,7 @@ static ssize_t aux0_store(struct device *dev,
 	if (value < 0)
 		return -EINVAL;
 
-	result = sensor_set_auxtrip(attr->handle, 0, CELSIUS_TO_KELVIN(value));
+	result = sensor_set_auxtrip(attr->handle, 0, CELSIUS_TO_DECI_KELVIN(value));
 	return result ? result : count;
 }
 
@@ -364,7 +364,7 @@ static ssize_t aux1_store(struct device *dev,
 	if (value < 0)
 		return -EINVAL;
 
-	result = sensor_set_auxtrip(attr->handle, 1, CELSIUS_TO_KELVIN(value));
+	result = sensor_set_auxtrip(attr->handle, 1, CELSIUS_TO_DECI_KELVIN(value));
 	return result ? result : count;
 }
 
diff --git a/kernel/drivers/platform/x86/intel_mid_powerbtn.c b/kernel/drivers/platform/x86/intel_mid_powerbtn.c
index 22606d6b2..1fc0de870 100644
--- a/kernel/drivers/platform/x86/intel_mid_powerbtn.c
+++ b/kernel/drivers/platform/x86/intel_mid_powerbtn.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/mfd/intel_msic.h>
+#include <linux/pm_wakeirq.h>
 
 #define DRIVER_NAME "msic_power_btn"
 
@@ -76,14 +77,17 @@ static int mfld_pb_probe(struct platform_device *pdev)
 
 	input_set_capability(input, EV_KEY, KEY_POWER);
 
-	error = request_threaded_irq(irq, NULL, mfld_pb_isr, IRQF_NO_SUSPEND,
-			DRIVER_NAME, input);
+	error = request_threaded_irq(irq, NULL, mfld_pb_isr, 0,
+				     DRIVER_NAME, input);
 	if (error) {
 		dev_err(&pdev->dev, "Unable to request irq %d for mfld power"
 				"button\n", irq);
 		goto err_free_input;
 	}
 
+	device_init_wakeup(&pdev->dev, true);
+	dev_pm_set_wake_irq(&pdev->dev, irq);
+
 	error = input_register_device(input);
 	if (error) {
 		dev_err(&pdev->dev, "Unable to register input dev, error "
@@ -124,6 +128,8 @@ static int mfld_pb_remove(struct platform_device *pdev)
 	struct input_dev *input = platform_get_drvdata(pdev);
 	int irq = platform_get_irq(pdev, 0);
 
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
 	free_irq(irq, input);
 	input_unregister_device(input);
 
diff --git a/kernel/drivers/platform/x86/intel_mid_thermal.c b/kernel/drivers/platform/x86/intel_mid_thermal.c
index 0944e834a..9f713b832 100644
--- a/kernel/drivers/platform/x86/intel_mid_thermal.c
+++ b/kernel/drivers/platform/x86/intel_mid_thermal.c
@@ -132,7 +132,7 @@ static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max)
  * to achieve very close approximate temp value with less than
  * 0.5C error
  */
-static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp)
+static int adc_to_temp(int direct, uint16_t adc_val, int *tp)
 {
 	int temp;
 
@@ -174,14 +174,13 @@ static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp)
  *
  * Can sleep
  */
-static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp)
+static int mid_read_temp(struct thermal_zone_device *tzd, int *temp)
 {
 	struct thermal_device_info *td_info = tzd->devdata;
 	uint16_t adc_val, addr;
 	uint8_t data = 0;
 	int ret;
-	unsigned long curr_temp;
-
+	int curr_temp;
 
 	addr = td_info->chnl_addr;
 
@@ -453,7 +452,7 @@ static SIMPLE_DEV_PM_OPS(mid_thermal_pm,
  *
  * Can sleep
  */
-static int read_curr_temp(struct thermal_zone_device *tzd, unsigned long *temp)
+static int read_curr_temp(struct thermal_zone_device *tzd, int *temp)
 {
 	WARN_ON(tzd == NULL);
 	return mid_read_temp(tzd, temp);
diff --git a/kernel/drivers/platform/x86/intel_oaktrail.c b/kernel/drivers/platform/x86/intel_oaktrail.c
index 8037c8b46..6aa33c4a8 100644
--- a/kernel/drivers/platform/x86/intel_oaktrail.c
+++ b/kernel/drivers/platform/x86/intel_oaktrail.c
@@ -50,6 +50,7 @@
 #include <linux/platform_device.h>
 #include <linux/dmi.h>
 #include <linux/rfkill.h>
+#include <acpi/video.h>
 
 #define DRIVER_NAME	"intel_oaktrail"
 #define DRIVER_VERSION	"0.4ac1"
@@ -343,13 +344,11 @@ static int __init oaktrail_init(void)
 		goto err_device_add;
 	}
 
-	if (!acpi_video_backlight_support()) {
+	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		ret = oaktrail_backlight_init();
 		if (ret)
 			goto err_backlight;
-
-	} else
-		pr_info("Backlight controlled by ACPI video driver\n");
+	}
 
 	ret = oaktrail_rfkill_init();
 	if (ret) {
diff --git a/kernel/drivers/platform/x86/intel_pmc_ipc.c b/kernel/drivers/platform/x86/intel_pmc_ipc.c
new file mode 100644
index 000000000..28b2a12bb
--- /dev/null
+++ b/kernel/drivers/platform/x86/intel_pmc_ipc.c
@@ -0,0 +1,779 @@
+/*
+ * intel_pmc_ipc.c: Driver for the Intel PMC IPC mechanism
+ *
+ * (C) Copyright 2014-2015 Intel Corporation
+ *
+ * This driver is based on Intel SCU IPC driver(intel_scu_opc.c) by
+ *     Sreedhara DS <sreedhara.ds@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * PMC running in ARC processor communicates with other entity running in IA
+ * core through IPC mechanism which in turn messaging between IA core ad PMC.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/pm.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/pm_qos.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/sched.h>
+#include <linux/atomic.h>
+#include <linux/notifier.h>
+#include <linux/suspend.h>
+#include <linux/acpi.h>
+#include <asm/intel_pmc_ipc.h>
+#include <linux/platform_data/itco_wdt.h>
+
+/*
+ * IPC registers
+ * The IA write to IPC_CMD command register triggers an interrupt to the ARC,
+ * The ARC handles the interrupt and services it, writing optional data to
+ * the IPC1 registers, updates the IPC_STS response register with the status.
+ */
+#define IPC_CMD			0x0
+#define		IPC_CMD_MSI		0x100
+#define		IPC_CMD_SIZE		16
+#define		IPC_CMD_SUBCMD		12
+#define IPC_STATUS		0x04
+#define		IPC_STATUS_IRQ		0x4
+#define		IPC_STATUS_ERR		0x2
+#define		IPC_STATUS_BUSY		0x1
+#define IPC_SPTR		0x08
+#define IPC_DPTR		0x0C
+#define IPC_WRITE_BUFFER	0x80
+#define IPC_READ_BUFFER		0x90
+
+/*
+ * 16-byte buffer for sending data associated with IPC command.
+ */
+#define IPC_DATA_BUFFER_SIZE	16
+
+#define IPC_LOOP_CNT		3000000
+#define IPC_MAX_SEC		3
+
+#define IPC_TRIGGER_MODE_IRQ		true
+
+/* exported resources from IFWI */
+#define PLAT_RESOURCE_IPC_INDEX		0
+#define PLAT_RESOURCE_IPC_SIZE		0x1000
+#define PLAT_RESOURCE_GCR_SIZE		0x1000
+#define PLAT_RESOURCE_PUNIT_DATA_INDEX	1
+#define PLAT_RESOURCE_PUNIT_INTER_INDEX	2
+#define PLAT_RESOURCE_ACPI_IO_INDEX	0
+
+/*
+ * BIOS does not create an ACPI device for each PMC function,
+ * but exports multiple resources from one ACPI device(IPC) for
+ * multiple functions. This driver is responsible to create a
+ * platform device and to export resources for those functions.
+ */
+#define TCO_DEVICE_NAME			"iTCO_wdt"
+#define SMI_EN_OFFSET			0x30
+#define SMI_EN_SIZE			4
+#define TCO_BASE_OFFSET			0x60
+#define TCO_REGS_SIZE			16
+#define PUNIT_DEVICE_NAME		"intel_punit_ipc"
+
+static const int iTCO_version = 3;
+
+static struct intel_pmc_ipc_dev {
+	struct device *dev;
+	void __iomem *ipc_base;
+	bool irq_mode;
+	int irq;
+	int cmd;
+	struct completion cmd_complete;
+
+	/* The following PMC BARs share the same ACPI device with the IPC */
+	resource_size_t acpi_io_base;
+	int acpi_io_size;
+	struct platform_device *tco_dev;
+
+	/* gcr */
+	resource_size_t gcr_base;
+	int gcr_size;
+
+	/* punit */
+	resource_size_t punit_base;
+	int punit_size;
+	resource_size_t punit_base2;
+	int punit_size2;
+	struct platform_device *punit_dev;
+} ipcdev;
+
+static char *ipc_err_sources[] = {
+	[IPC_ERR_NONE] =
+		"no error",
+	[IPC_ERR_CMD_NOT_SUPPORTED] =
+		"command not supported",
+	[IPC_ERR_CMD_NOT_SERVICED] =
+		"command not serviced",
+	[IPC_ERR_UNABLE_TO_SERVICE] =
+		"unable to service",
+	[IPC_ERR_CMD_INVALID] =
+		"command invalid",
+	[IPC_ERR_CMD_FAILED] =
+		"command failed",
+	[IPC_ERR_EMSECURITY] =
+		"Invalid Battery",
+	[IPC_ERR_UNSIGNEDKERNEL] =
+		"Unsigned kernel",
+};
+
+/* Prevent concurrent calls to the PMC */
+static DEFINE_MUTEX(ipclock);
+
+static inline void ipc_send_command(u32 cmd)
+{
+	ipcdev.cmd = cmd;
+	if (ipcdev.irq_mode) {
+		reinit_completion(&ipcdev.cmd_complete);
+		cmd |= IPC_CMD_MSI;
+	}
+	writel(cmd, ipcdev.ipc_base + IPC_CMD);
+}
+
+static inline u32 ipc_read_status(void)
+{
+	return readl(ipcdev.ipc_base + IPC_STATUS);
+}
+
+static inline void ipc_data_writel(u32 data, u32 offset)
+{
+	writel(data, ipcdev.ipc_base + IPC_WRITE_BUFFER + offset);
+}
+
+static inline u8 ipc_data_readb(u32 offset)
+{
+	return readb(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
+}
+
+static inline u32 ipc_data_readl(u32 offset)
+{
+	return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
+}
+
+static int intel_pmc_ipc_check_status(void)
+{
+	int status;
+	int ret = 0;
+
+	if (ipcdev.irq_mode) {
+		if (0 == wait_for_completion_timeout(
+				&ipcdev.cmd_complete, IPC_MAX_SEC * HZ))
+			ret = -ETIMEDOUT;
+	} else {
+		int loop_count = IPC_LOOP_CNT;
+
+		while ((ipc_read_status() & IPC_STATUS_BUSY) && --loop_count)
+			udelay(1);
+		if (loop_count == 0)
+			ret = -ETIMEDOUT;
+	}
+
+	status = ipc_read_status();
+	if (ret == -ETIMEDOUT) {
+		dev_err(ipcdev.dev,
+			"IPC timed out, TS=0x%x, CMD=0x%x\n",
+			status, ipcdev.cmd);
+		return ret;
+	}
+
+	if (status & IPC_STATUS_ERR) {
+		int i;
+
+		ret = -EIO;
+		i = (status >> IPC_CMD_SIZE) & 0xFF;
+		if (i < ARRAY_SIZE(ipc_err_sources))
+			dev_err(ipcdev.dev,
+				"IPC failed: %s, STS=0x%x, CMD=0x%x\n",
+				ipc_err_sources[i], status, ipcdev.cmd);
+		else
+			dev_err(ipcdev.dev,
+				"IPC failed: unknown, STS=0x%x, CMD=0x%x\n",
+				status, ipcdev.cmd);
+		if ((i == IPC_ERR_UNSIGNEDKERNEL) || (i == IPC_ERR_EMSECURITY))
+			ret = -EACCES;
+	}
+
+	return ret;
+}
+
+/**
+ * intel_pmc_ipc_simple_command() - Simple IPC command
+ * @cmd:	IPC command code.
+ * @sub:	IPC command sub type.
+ *
+ * Send a simple IPC command to PMC when don't need to specify
+ * input/output data and source/dest pointers.
+ *
+ * Return:	an IPC error code or 0 on success.
+ */
+int intel_pmc_ipc_simple_command(int cmd, int sub)
+{
+	int ret;
+
+	mutex_lock(&ipclock);
+	if (ipcdev.dev == NULL) {
+		mutex_unlock(&ipclock);
+		return -ENODEV;
+	}
+	ipc_send_command(sub << IPC_CMD_SUBCMD | cmd);
+	ret = intel_pmc_ipc_check_status();
+	mutex_unlock(&ipclock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(intel_pmc_ipc_simple_command);
+
+/**
+ * intel_pmc_ipc_raw_cmd() - IPC command with data and pointers
+ * @cmd:	IPC command code.
+ * @sub:	IPC command sub type.
+ * @in:		input data of this IPC command.
+ * @inlen:	input data length in bytes.
+ * @out:	output data of this IPC command.
+ * @outlen:	output data length in dwords.
+ * @sptr:	data writing to SPTR register.
+ * @dptr:	data writing to DPTR register.
+ *
+ * Send an IPC command to PMC with input/output data and source/dest pointers.
+ *
+ * Return:	an IPC error code or 0 on success.
+ */
+int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen, u32 *out,
+			  u32 outlen, u32 dptr, u32 sptr)
+{
+	u32 wbuf[4] = { 0 };
+	int ret;
+	int i;
+
+	if (inlen > IPC_DATA_BUFFER_SIZE || outlen > IPC_DATA_BUFFER_SIZE / 4)
+		return -EINVAL;
+
+	mutex_lock(&ipclock);
+	if (ipcdev.dev == NULL) {
+		mutex_unlock(&ipclock);
+		return -ENODEV;
+	}
+	memcpy(wbuf, in, inlen);
+	writel(dptr, ipcdev.ipc_base + IPC_DPTR);
+	writel(sptr, ipcdev.ipc_base + IPC_SPTR);
+	/* The input data register is 32bit register and inlen is in Byte */
+	for (i = 0; i < ((inlen + 3) / 4); i++)
+		ipc_data_writel(wbuf[i], 4 * i);
+	ipc_send_command((inlen << IPC_CMD_SIZE) |
+			(sub << IPC_CMD_SUBCMD) | cmd);
+	ret = intel_pmc_ipc_check_status();
+	if (!ret) {
+		/* out is read from 32bit register and outlen is in 32bit */
+		for (i = 0; i < outlen; i++)
+			*out++ = ipc_data_readl(4 * i);
+	}
+	mutex_unlock(&ipclock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(intel_pmc_ipc_raw_cmd);
+
+/**
+ * intel_pmc_ipc_command() -  IPC command with input/output data
+ * @cmd:	IPC command code.
+ * @sub:	IPC command sub type.
+ * @in:		input data of this IPC command.
+ * @inlen:	input data length in bytes.
+ * @out:	output data of this IPC command.
+ * @outlen:	output data length in dwords.
+ *
+ * Send an IPC command to PMC with input/output data.
+ *
+ * Return:	an IPC error code or 0 on success.
+ */
+int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
+			  u32 *out, u32 outlen)
+{
+	return intel_pmc_ipc_raw_cmd(cmd, sub, in, inlen, out, outlen, 0, 0);
+}
+EXPORT_SYMBOL_GPL(intel_pmc_ipc_command);
+
+static irqreturn_t ioc(int irq, void *dev_id)
+{
+	int status;
+
+	if (ipcdev.irq_mode) {
+		status = ipc_read_status();
+		writel(status | IPC_STATUS_IRQ, ipcdev.ipc_base + IPC_STATUS);
+	}
+	complete(&ipcdev.cmd_complete);
+
+	return IRQ_HANDLED;
+}
+
+static int ipc_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	resource_size_t pci_resource;
+	int ret;
+	int len;
+
+	ipcdev.dev = &pci_dev_get(pdev)->dev;
+	ipcdev.irq_mode = IPC_TRIGGER_MODE_IRQ;
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	ret = pci_request_regions(pdev, "intel_pmc_ipc");
+	if (ret)
+		return ret;
+
+	pci_resource = pci_resource_start(pdev, 0);
+	len = pci_resource_len(pdev, 0);
+	if (!pci_resource || !len) {
+		dev_err(&pdev->dev, "Failed to get resource\n");
+		return -ENOMEM;
+	}
+
+	init_completion(&ipcdev.cmd_complete);
+
+	if (request_irq(pdev->irq, ioc, 0, "intel_pmc_ipc", &ipcdev)) {
+		dev_err(&pdev->dev, "Failed to request irq\n");
+		return -EBUSY;
+	}
+
+	ipcdev.ipc_base = ioremap_nocache(pci_resource, len);
+	if (!ipcdev.ipc_base) {
+		dev_err(&pdev->dev, "Failed to ioremap ipc base\n");
+		free_irq(pdev->irq, &ipcdev);
+		ret = -ENOMEM;
+	}
+
+	return ret;
+}
+
+static void ipc_pci_remove(struct pci_dev *pdev)
+{
+	free_irq(pdev->irq, &ipcdev);
+	pci_release_regions(pdev);
+	pci_dev_put(pdev);
+	iounmap(ipcdev.ipc_base);
+	ipcdev.dev = NULL;
+}
+
+static const struct pci_device_id ipc_pci_ids[] = {
+	{PCI_VDEVICE(INTEL, 0x0a94), 0},
+	{PCI_VDEVICE(INTEL, 0x1a94), 0},
+	{ 0,}
+};
+MODULE_DEVICE_TABLE(pci, ipc_pci_ids);
+
+static struct pci_driver ipc_pci_driver = {
+	.name = "intel_pmc_ipc",
+	.id_table = ipc_pci_ids,
+	.probe = ipc_pci_probe,
+	.remove = ipc_pci_remove,
+};
+
+static ssize_t intel_pmc_ipc_simple_cmd_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count)
+{
+	int subcmd;
+	int cmd;
+	int ret;
+
+	ret = sscanf(buf, "%d %d", &cmd, &subcmd);
+	if (ret != 2) {
+		dev_err(dev, "Error args\n");
+		return -EINVAL;
+	}
+
+	ret = intel_pmc_ipc_simple_command(cmd, subcmd);
+	if (ret) {
+		dev_err(dev, "command %d error with %d\n", cmd, ret);
+		return ret;
+	}
+	return (ssize_t)count;
+}
+
+static ssize_t intel_pmc_ipc_northpeak_store(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count)
+{
+	unsigned long val;
+	int subcmd;
+	int ret;
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	if (val)
+		subcmd = 1;
+	else
+		subcmd = 0;
+	ret = intel_pmc_ipc_simple_command(PMC_IPC_NORTHPEAK_CTRL, subcmd);
+	if (ret) {
+		dev_err(dev, "command north %d error with %d\n", subcmd, ret);
+		return ret;
+	}
+	return (ssize_t)count;
+}
+
+static DEVICE_ATTR(simplecmd, S_IWUSR,
+		   NULL, intel_pmc_ipc_simple_cmd_store);
+static DEVICE_ATTR(northpeak, S_IWUSR,
+		   NULL, intel_pmc_ipc_northpeak_store);
+
+static struct attribute *intel_ipc_attrs[] = {
+	&dev_attr_northpeak.attr,
+	&dev_attr_simplecmd.attr,
+	NULL
+};
+
+static const struct attribute_group intel_ipc_group = {
+	.attrs = intel_ipc_attrs,
+};
+
+#define PUNIT_RESOURCE_INTER		1
+static struct resource punit_res[] = {
+	/* Punit */
+	{
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+#define TCO_RESOURCE_ACPI_IO		0
+#define TCO_RESOURCE_SMI_EN_IO		1
+#define TCO_RESOURCE_GCR_MEM		2
+static struct resource tco_res[] = {
+	/* ACPI - TCO */
+	{
+		.flags = IORESOURCE_IO,
+	},
+	/* ACPI - SMI */
+	{
+		.flags = IORESOURCE_IO,
+	},
+	/* GCS */
+	{
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct itco_wdt_platform_data tco_info = {
+	.name = "Apollo Lake SoC",
+	.version = 3,
+};
+
+static int ipc_create_punit_device(void)
+{
+	struct platform_device *pdev;
+	struct resource *res;
+	int ret;
+
+	pdev = platform_device_alloc(PUNIT_DEVICE_NAME, -1);
+	if (!pdev) {
+		dev_err(ipcdev.dev, "Failed to alloc punit platform device\n");
+		return -ENOMEM;
+	}
+
+	pdev->dev.parent = ipcdev.dev;
+
+	res = punit_res;
+	res->start = ipcdev.punit_base;
+	res->end = res->start + ipcdev.punit_size - 1;
+
+	res = punit_res + PUNIT_RESOURCE_INTER;
+	res->start = ipcdev.punit_base2;
+	res->end = res->start + ipcdev.punit_size2 - 1;
+
+	ret = platform_device_add_resources(pdev, punit_res,
+					    ARRAY_SIZE(punit_res));
+	if (ret) {
+		dev_err(ipcdev.dev, "Failed to add platform punit resources\n");
+		goto err;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+		dev_err(ipcdev.dev, "Failed to add punit platform device\n");
+		goto err;
+	}
+	ipcdev.punit_dev = pdev;
+
+	return 0;
+err:
+	platform_device_put(pdev);
+	return ret;
+}
+
+static int ipc_create_tco_device(void)
+{
+	struct platform_device *pdev;
+	struct resource *res;
+	int ret;
+
+	pdev = platform_device_alloc(TCO_DEVICE_NAME, -1);
+	if (!pdev) {
+		dev_err(ipcdev.dev, "Failed to alloc tco platform device\n");
+		return -ENOMEM;
+	}
+
+	pdev->dev.parent = ipcdev.dev;
+
+	res = tco_res + TCO_RESOURCE_ACPI_IO;
+	res->start = ipcdev.acpi_io_base + TCO_BASE_OFFSET;
+	res->end = res->start + TCO_REGS_SIZE - 1;
+
+	res = tco_res + TCO_RESOURCE_SMI_EN_IO;
+	res->start = ipcdev.acpi_io_base + SMI_EN_OFFSET;
+	res->end = res->start + SMI_EN_SIZE - 1;
+
+	res = tco_res + TCO_RESOURCE_GCR_MEM;
+	res->start = ipcdev.gcr_base;
+	res->end = res->start + ipcdev.gcr_size - 1;
+
+	ret = platform_device_add_resources(pdev, tco_res, ARRAY_SIZE(tco_res));
+	if (ret) {
+		dev_err(ipcdev.dev, "Failed to add tco platform resources\n");
+		goto err;
+	}
+
+	ret = platform_device_add_data(pdev, &tco_info, sizeof(tco_info));
+	if (ret) {
+		dev_err(ipcdev.dev, "Failed to add tco platform data\n");
+		goto err;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+		dev_err(ipcdev.dev, "Failed to add tco platform device\n");
+		goto err;
+	}
+	ipcdev.tco_dev = pdev;
+
+	return 0;
+err:
+	platform_device_put(pdev);
+	return ret;
+}
+
+static int ipc_create_pmc_devices(void)
+{
+	int ret;
+
+	ret = ipc_create_tco_device();
+	if (ret) {
+		dev_err(ipcdev.dev, "Failed to add tco platform device\n");
+		return ret;
+	}
+	ret = ipc_create_punit_device();
+	if (ret) {
+		dev_err(ipcdev.dev, "Failed to add punit platform device\n");
+		platform_device_unregister(ipcdev.tco_dev);
+	}
+	return ret;
+}
+
+static int ipc_plat_get_res(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *addr;
+	int size;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO,
+				    PLAT_RESOURCE_ACPI_IO_INDEX);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get io resource\n");
+		return -ENXIO;
+	}
+	size = resource_size(res);
+	ipcdev.acpi_io_base = res->start;
+	ipcdev.acpi_io_size = size;
+	dev_info(&pdev->dev, "io res: %llx %x\n",
+		 (long long)res->start, (int)resource_size(res));
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_PUNIT_DATA_INDEX);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get punit resource\n");
+		return -ENXIO;
+	}
+	size = resource_size(res);
+	ipcdev.punit_base = res->start;
+	ipcdev.punit_size = size;
+	dev_info(&pdev->dev, "punit data res: %llx %x\n",
+		 (long long)res->start, (int)resource_size(res));
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_PUNIT_INTER_INDEX);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get punit inter resource\n");
+		return -ENXIO;
+	}
+	size = resource_size(res);
+	ipcdev.punit_base2 = res->start;
+	ipcdev.punit_size2 = size;
+	dev_info(&pdev->dev, "punit interface res: %llx %x\n",
+		 (long long)res->start, (int)resource_size(res));
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_IPC_INDEX);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get ipc resource\n");
+		return -ENXIO;
+	}
+	size = PLAT_RESOURCE_IPC_SIZE;
+	if (!request_mem_region(res->start, size, pdev->name)) {
+		dev_err(&pdev->dev, "Failed to request ipc resource\n");
+		return -EBUSY;
+	}
+	addr = ioremap_nocache(res->start, size);
+	if (!addr) {
+		dev_err(&pdev->dev, "I/O memory remapping failed\n");
+		release_mem_region(res->start, size);
+		return -ENOMEM;
+	}
+	ipcdev.ipc_base = addr;
+
+	ipcdev.gcr_base = res->start + size;
+	ipcdev.gcr_size = PLAT_RESOURCE_GCR_SIZE;
+	dev_info(&pdev->dev, "ipc res: %llx %x\n",
+		 (long long)res->start, (int)resource_size(res));
+
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id ipc_acpi_ids[] = {
+	{ "INT34D2", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, ipc_acpi_ids);
+#endif
+
+static int ipc_plat_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret;
+
+	ipcdev.dev = &pdev->dev;
+	ipcdev.irq_mode = IPC_TRIGGER_MODE_IRQ;
+	init_completion(&ipcdev.cmd_complete);
+
+	ipcdev.irq = platform_get_irq(pdev, 0);
+	if (ipcdev.irq < 0) {
+		dev_err(&pdev->dev, "Failed to get irq\n");
+		return -EINVAL;
+	}
+
+	ret = ipc_plat_get_res(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request resource\n");
+		return ret;
+	}
+
+	ret = ipc_create_pmc_devices();
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to create pmc devices\n");
+		goto err_device;
+	}
+
+	if (request_irq(ipcdev.irq, ioc, 0, "intel_pmc_ipc", &ipcdev)) {
+		dev_err(&pdev->dev, "Failed to request irq\n");
+		ret = -EBUSY;
+		goto err_irq;
+	}
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &intel_ipc_group);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to create sysfs group %d\n",
+			ret);
+		goto err_sys;
+	}
+
+	return 0;
+err_sys:
+	free_irq(ipcdev.irq, &ipcdev);
+err_irq:
+	platform_device_unregister(ipcdev.tco_dev);
+	platform_device_unregister(ipcdev.punit_dev);
+err_device:
+	iounmap(ipcdev.ipc_base);
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_IPC_INDEX);
+	if (res)
+		release_mem_region(res->start, PLAT_RESOURCE_IPC_SIZE);
+	return ret;
+}
+
+static int ipc_plat_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	sysfs_remove_group(&pdev->dev.kobj, &intel_ipc_group);
+	free_irq(ipcdev.irq, &ipcdev);
+	platform_device_unregister(ipcdev.tco_dev);
+	platform_device_unregister(ipcdev.punit_dev);
+	iounmap(ipcdev.ipc_base);
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_IPC_INDEX);
+	if (res)
+		release_mem_region(res->start, PLAT_RESOURCE_IPC_SIZE);
+	ipcdev.dev = NULL;
+	return 0;
+}
+
+static struct platform_driver ipc_plat_driver = {
+	.remove = ipc_plat_remove,
+	.probe = ipc_plat_probe,
+	.driver = {
+		.name = "pmc-ipc-plat",
+		.acpi_match_table = ACPI_PTR(ipc_acpi_ids),
+	},
+};
+
+static int __init intel_pmc_ipc_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&ipc_plat_driver);
+	if (ret) {
+		pr_err("Failed to register PMC ipc platform driver\n");
+		return ret;
+	}
+	ret = pci_register_driver(&ipc_pci_driver);
+	if (ret) {
+		pr_err("Failed to register PMC ipc pci driver\n");
+		platform_driver_unregister(&ipc_plat_driver);
+		return ret;
+	}
+	return ret;
+}
+
+static void __exit intel_pmc_ipc_exit(void)
+{
+	pci_unregister_driver(&ipc_pci_driver);
+	platform_driver_unregister(&ipc_plat_driver);
+}
+
+MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>");
+MODULE_DESCRIPTION("Intel PMC IPC driver");
+MODULE_LICENSE("GPL");
+
+/* Some modules are dependent on this, so init earlier */
+fs_initcall(intel_pmc_ipc_init);
+module_exit(intel_pmc_ipc_exit);
diff --git a/kernel/drivers/platform/x86/intel_scu_ipc.c b/kernel/drivers/platform/x86/intel_scu_ipc.c
index 001b199a8..f94b73054 100644
--- a/kernel/drivers/platform/x86/intel_scu_ipc.c
+++ b/kernel/drivers/platform/x86/intel_scu_ipc.c
@@ -92,11 +92,8 @@ static struct intel_scu_ipc_pdata_t intel_scu_ipc_tangier_pdata = {
 	.irq_mode = 0,
 };
 
-static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id);
-static void ipc_remove(struct pci_dev *pdev);
-
 struct intel_scu_ipc_dev {
-	struct pci_dev *pdev;
+	struct device *dev;
 	void __iomem *ipc_base;
 	void __iomem *i2c_base;
 	struct completion cmd_complete;
@@ -118,28 +115,30 @@ static struct intel_scu_ipc_dev  ipcdev; /* Only one for now */
 static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */
 
 /*
+ * Send ipc command
  * Command Register (Write Only):
  * A write to this register results in an interrupt to the SCU core processor
  * Format:
  * |rfu2(8) | size(8) | command id(4) | rfu1(3) | ioc(1) | command(8)|
  */
-static inline void ipc_command(u32 cmd) /* Send ipc command */
+static inline void ipc_command(struct intel_scu_ipc_dev *scu, u32 cmd)
 {
-	if (ipcdev.irq_mode) {
-		reinit_completion(&ipcdev.cmd_complete);
-		writel(cmd | IPC_IOC, ipcdev.ipc_base);
+	if (scu->irq_mode) {
+		reinit_completion(&scu->cmd_complete);
+		writel(cmd | IPC_IOC, scu->ipc_base);
 	}
-	writel(cmd, ipcdev.ipc_base);
+	writel(cmd, scu->ipc_base);
 }
 
 /*
+ * Write ipc data
  * IPC Write Buffer (Write Only):
  * 16-byte buffer for sending data associated with IPC command to
  * SCU. Size of the data is specified in the IPC_COMMAND_REG register
  */
-static inline void ipc_data_writel(u32 data, u32 offset) /* Write ipc data */
+static inline void ipc_data_writel(struct intel_scu_ipc_dev *scu, u32 data, u32 offset)
 {
-	writel(data, ipcdev.ipc_base + 0x80 + offset);
+	writel(data, scu->ipc_base + 0x80 + offset);
 }
 
 /*
@@ -149,35 +148,37 @@ static inline void ipc_data_writel(u32 data, u32 offset) /* Write ipc data */
  * Format:
  * |rfu3(8)|error code(8)|initiator id(8)|cmd id(4)|rfu1(2)|error(1)|busy(1)|
  */
-static inline u8 ipc_read_status(void)
+static inline u8 ipc_read_status(struct intel_scu_ipc_dev *scu)
 {
-	return __raw_readl(ipcdev.ipc_base + 0x04);
+	return __raw_readl(scu->ipc_base + 0x04);
 }
 
-static inline u8 ipc_data_readb(u32 offset) /* Read ipc byte data */
+/* Read ipc byte data */
+static inline u8 ipc_data_readb(struct intel_scu_ipc_dev *scu, u32 offset)
 {
-	return readb(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
+	return readb(scu->ipc_base + IPC_READ_BUFFER + offset);
 }
 
-static inline u32 ipc_data_readl(u32 offset) /* Read ipc u32 data */
+/* Read ipc u32 data */
+static inline u32 ipc_data_readl(struct intel_scu_ipc_dev *scu, u32 offset)
 {
-	return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
+	return readl(scu->ipc_base + IPC_READ_BUFFER + offset);
 }
 
 /* Wait till scu status is busy */
-static inline int busy_loop(void)
+static inline int busy_loop(struct intel_scu_ipc_dev *scu)
 {
-	u32 status = ipc_read_status();
+	u32 status = ipc_read_status(scu);
 	u32 loop_count = 100000;
 
 	/* break if scu doesn't reset busy bit after huge retry */
 	while ((status & BIT(0)) && --loop_count) {
 		udelay(1); /* scu processing time is in few u secods */
-		status = ipc_read_status();
+		status = ipc_read_status(scu);
 	}
 
 	if (status & BIT(0)) {
-		dev_err(&ipcdev.pdev->dev, "IPC timed out");
+		dev_err(scu->dev, "IPC timed out");
 		return -ETIMEDOUT;
 	}
 
@@ -188,42 +189,42 @@ static inline int busy_loop(void)
 }
 
 /* Wait till ipc ioc interrupt is received or timeout in 3 HZ */
-static inline int ipc_wait_for_interrupt(void)
+static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
 {
 	int status;
 
-	if (!wait_for_completion_timeout(&ipcdev.cmd_complete, 3 * HZ)) {
-		struct device *dev = &ipcdev.pdev->dev;
-		dev_err(dev, "IPC timed out\n");
+	if (!wait_for_completion_timeout(&scu->cmd_complete, 3 * HZ)) {
+		dev_err(scu->dev, "IPC timed out\n");
 		return -ETIMEDOUT;
 	}
 
-	status = ipc_read_status();
+	status = ipc_read_status(scu);
 	if (status & BIT(1))
 		return -EIO;
 
 	return 0;
 }
 
-static int intel_scu_ipc_check_status(void)
+static int intel_scu_ipc_check_status(struct intel_scu_ipc_dev *scu)
 {
-	return ipcdev.irq_mode ? ipc_wait_for_interrupt() : busy_loop();
+	return scu->irq_mode ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
 }
 
 /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
 static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
 {
+	struct intel_scu_ipc_dev *scu = &ipcdev;
 	int nc;
 	u32 offset = 0;
 	int err;
-	u8 cbuf[IPC_WWBUF_SIZE] = { };
+	u8 cbuf[IPC_WWBUF_SIZE];
 	u32 *wbuf = (u32 *)&cbuf;
 
-	mutex_lock(&ipclock);
-
 	memset(cbuf, 0, sizeof(cbuf));
 
-	if (ipcdev.pdev == NULL) {
+	mutex_lock(&ipclock);
+
+	if (scu->dev == NULL) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
@@ -235,27 +236,27 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
 
 	if (id == IPC_CMD_PCNTRL_R) {
 		for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
-			ipc_data_writel(wbuf[nc], offset);
-		ipc_command((count * 2) << 16 | id << 12 | 0 << 8 | op);
+			ipc_data_writel(scu, wbuf[nc], offset);
+		ipc_command(scu, (count * 2) << 16 | id << 12 | 0 << 8 | op);
 	} else if (id == IPC_CMD_PCNTRL_W) {
 		for (nc = 0; nc < count; nc++, offset += 1)
 			cbuf[offset] = data[nc];
 		for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
-			ipc_data_writel(wbuf[nc], offset);
-		ipc_command((count * 3) << 16 | id << 12 | 0 << 8 | op);
+			ipc_data_writel(scu, wbuf[nc], offset);
+		ipc_command(scu, (count * 3) << 16 | id << 12 | 0 << 8 | op);
 	} else if (id == IPC_CMD_PCNTRL_M) {
 		cbuf[offset] = data[0];
 		cbuf[offset + 1] = data[1];
-		ipc_data_writel(wbuf[0], 0); /* Write wbuff */
-		ipc_command(4 << 16 | id << 12 | 0 << 8 | op);
+		ipc_data_writel(scu, wbuf[0], 0); /* Write wbuff */
+		ipc_command(scu, 4 << 16 | id << 12 | 0 << 8 | op);
 	}
 
-	err = intel_scu_ipc_check_status();
+	err = intel_scu_ipc_check_status(scu);
 	if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
 		/* Workaround: values are read as 0 without memcpy_fromio */
-		memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16);
+		memcpy_fromio(cbuf, scu->ipc_base + 0x90, 16);
 		for (nc = 0; nc < count; nc++)
-			data[nc] = ipc_data_readb(nc);
+			data[nc] = ipc_data_readb(scu, nc);
 	}
 	mutex_unlock(&ipclock);
 	return err;
@@ -436,15 +437,16 @@ EXPORT_SYMBOL(intel_scu_ipc_update_register);
  */
 int intel_scu_ipc_simple_command(int cmd, int sub)
 {
+	struct intel_scu_ipc_dev *scu = &ipcdev;
 	int err;
 
 	mutex_lock(&ipclock);
-	if (ipcdev.pdev == NULL) {
+	if (scu->dev == NULL) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
-	ipc_command(sub << 12 | cmd);
-	err = intel_scu_ipc_check_status();
+	ipc_command(scu, sub << 12 | cmd);
+	err = intel_scu_ipc_check_status(scu);
 	mutex_unlock(&ipclock);
 	return err;
 }
@@ -465,23 +467,24 @@ EXPORT_SYMBOL(intel_scu_ipc_simple_command);
 int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
 			  u32 *out, int outlen)
 {
+	struct intel_scu_ipc_dev *scu = &ipcdev;
 	int i, err;
 
 	mutex_lock(&ipclock);
-	if (ipcdev.pdev == NULL) {
+	if (scu->dev == NULL) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
 
 	for (i = 0; i < inlen; i++)
-		ipc_data_writel(*in++, 4 * i);
+		ipc_data_writel(scu, *in++, 4 * i);
 
-	ipc_command((inlen << 16) | (sub << 12) | cmd);
-	err = intel_scu_ipc_check_status();
+	ipc_command(scu, (inlen << 16) | (sub << 12) | cmd);
+	err = intel_scu_ipc_check_status(scu);
 
 	if (!err) {
 		for (i = 0; i < outlen; i++)
-			*out++ = ipc_data_readl(4 * i);
+			*out++ = ipc_data_readl(scu, 4 * i);
 	}
 
 	mutex_unlock(&ipclock);
@@ -507,25 +510,26 @@ EXPORT_SYMBOL(intel_scu_ipc_command);
  */
 int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data)
 {
+	struct intel_scu_ipc_dev *scu = &ipcdev;
 	u32 cmd = 0;
 
 	mutex_lock(&ipclock);
-	if (ipcdev.pdev == NULL) {
+	if (scu->dev == NULL) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
 	cmd = (addr >> 24) & 0xFF;
 	if (cmd == IPC_I2C_READ) {
-		writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
+		writel(addr, scu->i2c_base + IPC_I2C_CNTRL_ADDR);
 		/* Write not getting updated without delay */
 		mdelay(1);
-		*data = readl(ipcdev.i2c_base + I2C_DATA_ADDR);
+		*data = readl(scu->i2c_base + I2C_DATA_ADDR);
 	} else if (cmd == IPC_I2C_WRITE) {
-		writel(*data, ipcdev.i2c_base + I2C_DATA_ADDR);
+		writel(*data, scu->i2c_base + I2C_DATA_ADDR);
 		mdelay(1);
-		writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
+		writel(addr, scu->i2c_base + IPC_I2C_CNTRL_ADDR);
 	} else {
-		dev_err(&ipcdev.pdev->dev,
+		dev_err(scu->dev,
 			"intel_scu_ipc: I2C INVALID_CMD = 0x%x\n", cmd);
 
 		mutex_unlock(&ipclock);
@@ -545,63 +549,65 @@ EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl);
  */
 static irqreturn_t ioc(int irq, void *dev_id)
 {
-	if (ipcdev.irq_mode)
-		complete(&ipcdev.cmd_complete);
+	struct intel_scu_ipc_dev *scu = dev_id;
+
+	if (scu->irq_mode)
+		complete(&scu->cmd_complete);
 
 	return IRQ_HANDLED;
 }
 
 /**
  *	ipc_probe	-	probe an Intel SCU IPC
- *	@dev: the PCI device matching
+ *	@pdev: the PCI device matching
  *	@id: entry in the match table
  *
  *	Enable and install an intel SCU IPC. This appears in the PCI space
  *	but uses some hard coded addresses as well.
  */
-static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int ipc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	int platform;		/* Platform type */
 	int err;
+	struct intel_scu_ipc_dev *scu = &ipcdev;
 	struct intel_scu_ipc_pdata_t *pdata;
-	resource_size_t base;
 
-	if (ipcdev.pdev)		/* We support only one SCU */
+	platform = intel_mid_identify_cpu();
+	if (platform == 0)
+		return -ENODEV;
+
+	if (scu->dev)		/* We support only one SCU */
 		return -EBUSY;
 
 	pdata = (struct intel_scu_ipc_pdata_t *)id->driver_data;
 
-	ipcdev.pdev = pci_dev_get(dev);
-	ipcdev.irq_mode = pdata->irq_mode;
+	scu->dev = &pdev->dev;
+	scu->irq_mode = pdata->irq_mode;
 
-	err = pci_enable_device(dev);
+	err = pcim_enable_device(pdev);
 	if (err)
 		return err;
 
-	err = pci_request_regions(dev, "intel_scu_ipc");
+	err = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
 	if (err)
 		return err;
 
-	base = pci_resource_start(dev, 0);
-	if (!base)
-		return -ENOMEM;
+	init_completion(&scu->cmd_complete);
 
-	init_completion(&ipcdev.cmd_complete);
+	err = devm_request_irq(&pdev->dev, pdev->irq, ioc, 0, "intel_scu_ipc",
+			       scu);
+	if (err)
+		return err;
 
-	if (request_irq(dev->irq, ioc, 0, "intel_scu_ipc", &ipcdev))
-		return -EBUSY;
+	scu->ipc_base = pcim_iomap_table(pdev)[0];
 
-	ipcdev.ipc_base = ioremap_nocache(base, pci_resource_len(dev, 0));
-	if (!ipcdev.ipc_base)
+	scu->i2c_base = ioremap_nocache(pdata->i2c_base, pdata->i2c_len);
+	if (!scu->i2c_base)
 		return -ENOMEM;
 
-	ipcdev.i2c_base = ioremap_nocache(pdata->i2c_base, pdata->i2c_len);
-	if (!ipcdev.i2c_base) {
-		iounmap(ipcdev.ipc_base);
-		return -ENOMEM;
-	}
-
 	intel_scu_devices_create();
 
+	pci_set_drvdata(pdev, scu);
 	return 0;
 }
 
@@ -617,12 +623,13 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
  */
 static void ipc_remove(struct pci_dev *pdev)
 {
-	free_irq(pdev->irq, &ipcdev);
-	pci_release_regions(pdev);
-	pci_dev_put(ipcdev.pdev);
-	iounmap(ipcdev.ipc_base);
-	iounmap(ipcdev.i2c_base);
-	ipcdev.pdev = NULL;
+	struct intel_scu_ipc_dev *scu = pci_get_drvdata(pdev);
+
+	mutex_lock(&ipclock);
+	scu->dev = NULL;
+	mutex_unlock(&ipclock);
+
+	iounmap(scu->i2c_base);
 	intel_scu_devices_destroy();
 }
 
@@ -652,24 +659,8 @@ static struct pci_driver ipc_driver = {
 	.remove = ipc_remove,
 };
 
-static int __init intel_scu_ipc_init(void)
-{
-	int platform;		/* Platform type */
-
-	platform = intel_mid_identify_cpu();
-	if (platform == 0)
-		return -ENODEV;
-	return  pci_register_driver(&ipc_driver);
-}
-
-static void __exit intel_scu_ipc_exit(void)
-{
-	pci_unregister_driver(&ipc_driver);
-}
+module_pci_driver(ipc_driver);
 
 MODULE_AUTHOR("Sreedhara DS <sreedhara.ds@intel.com>");
 MODULE_DESCRIPTION("Intel SCU IPC driver");
 MODULE_LICENSE("GPL");
-
-module_init(intel_scu_ipc_init);
-module_exit(intel_scu_ipc_exit);
diff --git a/kernel/drivers/platform/x86/intel_scu_ipcutil.c b/kernel/drivers/platform/x86/intel_scu_ipcutil.c
index 02bc5a634..aa4542414 100644
--- a/kernel/drivers/platform/x86/intel_scu_ipcutil.c
+++ b/kernel/drivers/platform/x86/intel_scu_ipcutil.c
@@ -49,7 +49,7 @@ struct scu_ipc_data {
 
 static int scu_reg_access(u32 cmd, struct scu_ipc_data  *data)
 {
-	int count = data->count;
+	unsigned int count = data->count;
 
 	if (count == 0 || count == 3 || count > 4)
 		return -EINVAL;
diff --git a/kernel/drivers/platform/x86/msi-laptop.c b/kernel/drivers/platform/x86/msi-laptop.c
index 085987730..423177046 100644
--- a/kernel/drivers/platform/x86/msi-laptop.c
+++ b/kernel/drivers/platform/x86/msi-laptop.c
@@ -64,6 +64,7 @@
 #include <linux/i8042.h>
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
+#include <acpi/video.h>
 
 #define MSI_DRIVER_VERSION "0.5"
 
@@ -1069,9 +1070,8 @@ static int __init msi_init(void)
 
 	/* Register backlight stuff */
 
-	if (!quirks->old_ec_model || acpi_video_backlight_support()) {
-		pr_info("Brightness ignored, must be controlled by ACPI video driver\n");
-	} else {
+	if (quirks->old_ec_model ||
+	    acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		struct backlight_properties props;
 		memset(&props, 0, sizeof(struct backlight_properties));
 		props.type = BACKLIGHT_PLATFORM;
diff --git a/kernel/drivers/platform/x86/msi-wmi.c b/kernel/drivers/platform/x86/msi-wmi.c
index 6d2bac0c4..978e6d640 100644
--- a/kernel/drivers/platform/x86/msi-wmi.c
+++ b/kernel/drivers/platform/x86/msi-wmi.c
@@ -29,6 +29,7 @@
 #include <linux/backlight.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <acpi/video.h>
 
 MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>");
 MODULE_DESCRIPTION("MSI laptop WMI hotkeys driver");
@@ -320,7 +321,8 @@ static int __init msi_wmi_init(void)
 		break;
 	}
 
-	if (wmi_has_guid(MSIWMI_BIOS_GUID) && !acpi_video_backlight_support()) {
+	if (wmi_has_guid(MSIWMI_BIOS_GUID) &&
+	    acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		err = msi_wmi_backlight_setup();
 		if (err) {
 			pr_err("Unable to setup backlight device\n");
diff --git a/kernel/drivers/platform/x86/pvpanic.c b/kernel/drivers/platform/x86/pvpanic.c
index 073a90a63..fd86daba7 100644
--- a/kernel/drivers/platform/x86/pvpanic.c
+++ b/kernel/drivers/platform/x86/pvpanic.c
@@ -92,13 +92,13 @@ pvpanic_walk_resources(struct acpi_resource *res, void *context)
 
 static int pvpanic_add(struct acpi_device *device)
 {
-	acpi_status status;
-	u64 ret;
+	int ret;
 
-	status = acpi_evaluate_integer(device->handle, "_STA", NULL,
-				       &ret);
+	ret = acpi_bus_get_status(device);
+	if (ret < 0)
+		return ret;
 
-	if (ACPI_FAILURE(status) || (ret & 0x0B) != 0x0B)
+	if (!device->status.enabled || !device->status.functional)
 		return -ENODEV;
 
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS,
diff --git a/kernel/drivers/platform/x86/samsung-laptop.c b/kernel/drivers/platform/x86/samsung-laptop.c
index 9e701b225..8c146e2b6 100644
--- a/kernel/drivers/platform/x86/samsung-laptop.c
+++ b/kernel/drivers/platform/x86/samsung-laptop.c
@@ -1720,27 +1720,14 @@ static int __init samsung_init(void)
 	samsung->handle_backlight = true;
 	samsung->quirks = quirks;
 
-
 #ifdef CONFIG_ACPI
 	if (samsung->quirks->broken_acpi_video)
-		acpi_video_dmi_promote_vendor();
-
-	/* Don't handle backlight here if the acpi video already handle it */
-	if (acpi_video_backlight_support()) {
-		samsung->handle_backlight = false;
-	} else if (samsung->quirks->broken_acpi_video) {
-		pr_info("Disabling ACPI video driver\n");
-		acpi_video_unregister();
-	}
+		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
+	if (samsung->quirks->use_native_backlight)
+		acpi_video_set_dmi_backlight_type(acpi_backlight_native);
 
-	if (samsung->quirks->use_native_backlight) {
-		pr_info("Using native backlight driver\n");
-		/* Tell acpi-video to not handle the backlight */
-		acpi_video_dmi_promote_vendor();
-		acpi_video_unregister();
-		/* And also do not handle it ourselves */
+	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
 		samsung->handle_backlight = false;
-	}
 #endif
 
 	ret = samsung_platform_init(samsung);
@@ -1751,12 +1738,6 @@ static int __init samsung_init(void)
 	if (ret)
 		goto error_sabi;
 
-#ifdef CONFIG_ACPI
-	/* Only log that if we are really on a sabi platform */
-	if (acpi_video_backlight_support())
-		pr_info("Backlight controlled by ACPI video driver\n");
-#endif
-
 	ret = samsung_sysfs_init(samsung);
 	if (ret)
 		goto error_sysfs;
diff --git a/kernel/drivers/platform/x86/sony-laptop.c b/kernel/drivers/platform/x86/sony-laptop.c
index e51c1e753..f73c29558 100644
--- a/kernel/drivers/platform/x86/sony-laptop.c
+++ b/kernel/drivers/platform/x86/sony-laptop.c
@@ -69,6 +69,7 @@
 #include <linux/miscdevice.h>
 #endif
 #include <asm/uaccess.h>
+#include <acpi/video.h>
 
 #define dprintk(fmt, ...)			\
 do {						\
@@ -1203,6 +1204,8 @@ static void sony_nc_notify(struct acpi_device *device, u32 event)
 {
 	u32 real_ev = event;
 	u8 ev_type = 0;
+	int ret;
+
 	dprintk("sony_nc_notify, event: 0x%.2x\n", event);
 
 	if (event >= 0x90) {
@@ -1224,13 +1227,12 @@ static void sony_nc_notify(struct acpi_device *device, u32 event)
 		case 0x0100:
 		case 0x0127:
 			ev_type = HOTKEY;
-			real_ev = sony_nc_hotkeys_decode(event, handle);
+			ret = sony_nc_hotkeys_decode(event, handle);
 
-			if (real_ev > 0)
-				sony_laptop_report_input_event(real_ev);
-			else
-				/* restore the original event for reporting */
-				real_ev = event;
+			if (ret > 0) {
+				sony_laptop_report_input_event(ret);
+				real_ev = ret;
+			}
 
 			break;
 
@@ -3198,12 +3200,8 @@ static int sony_nc_add(struct acpi_device *device)
 			sony_nc_function_setup(device, sony_pf_device);
 	}
 
-	/* setup input devices and helper fifo */
-	if (acpi_video_backlight_support()) {
-		pr_info("brightness ignored, must be controlled by ACPI video driver\n");
-	} else {
+	if (acpi_video_get_backlight_type() == acpi_backlight_vendor)
 		sony_nc_backlight_setup();
-	}
 
 	/* create sony_pf sysfs attributes related to the SNC device */
 	for (item = sony_nc_values; item->name; ++item) {
diff --git a/kernel/drivers/platform/x86/surfacepro3_button.c b/kernel/drivers/platform/x86/surfacepro3_button.c
new file mode 100644
index 000000000..f7dade3fd
--- /dev/null
+++ b/kernel/drivers/platform/x86/surfacepro3_button.c
@@ -0,0 +1,216 @@
+/*
+ * power/home/volume button support for
+ * Microsoft Surface Pro 3 tablet.
+ *
+ * Copyright (c) 2015 Intel Corporation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/acpi.h>
+#include <acpi/button.h>
+
+#define SURFACE_BUTTON_HID		"MSHW0028"
+#define SURFACE_BUTTON_OBJ_NAME		"VGBI"
+#define SURFACE_BUTTON_DEVICE_NAME	"Surface Pro 3 Buttons"
+
+#define SURFACE_BUTTON_NOTIFY_PRESS_POWER	0xc6
+#define SURFACE_BUTTON_NOTIFY_RELEASE_POWER	0xc7
+
+#define SURFACE_BUTTON_NOTIFY_PRESS_HOME	0xc4
+#define SURFACE_BUTTON_NOTIFY_RELEASE_HOME	0xc5
+
+#define SURFACE_BUTTON_NOTIFY_PRESS_VOLUME_UP	0xc0
+#define SURFACE_BUTTON_NOTIFY_RELEASE_VOLUME_UP	0xc1
+
+#define SURFACE_BUTTON_NOTIFY_PRESS_VOLUME_DOWN	0xc2
+#define SURFACE_BUTTON_NOTIFY_RELEASE_VOLUME_DOWN	0xc3
+
+ACPI_MODULE_NAME("surface pro 3 button");
+
+MODULE_AUTHOR("Chen Yu");
+MODULE_DESCRIPTION("Surface Pro3 Button Driver");
+MODULE_LICENSE("GPL v2");
+
+/*
+ * Power button, Home button, Volume buttons support is supposed to
+ * be covered by drivers/input/misc/soc_button_array.c, which is implemented
+ * according to "Windows ACPI Design Guide for SoC Platforms".
+ * However surface pro3 seems not to obey the specs, instead it uses
+ * device VGBI(MSHW0028) for dispatching the events.
+ * We choose acpi_driver rather than platform_driver/i2c_driver because
+ * although VGBI has an i2c resource connected to i2c controller, it
+ * is not embedded in any i2c controller's scope, thus neither platform_device
+ * will be created, nor i2c_client will be enumerated, we have to use
+ * acpi_driver.
+ */
+static const struct acpi_device_id surface_button_device_ids[] = {
+	{SURFACE_BUTTON_HID,    0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, surface_button_device_ids);
+
+struct surface_button {
+	unsigned int type;
+	struct input_dev *input;
+	char phys[32];			/* for input device */
+	unsigned long pushed;
+	bool suspended;
+};
+
+static void surface_button_notify(struct acpi_device *device, u32 event)
+{
+	struct surface_button *button = acpi_driver_data(device);
+	struct input_dev *input;
+	int key_code = KEY_RESERVED;
+	bool pressed = false;
+
+	switch (event) {
+	/* Power button press,release handle */
+	case SURFACE_BUTTON_NOTIFY_PRESS_POWER:
+		pressed = true;
+		/*fall through*/
+	case SURFACE_BUTTON_NOTIFY_RELEASE_POWER:
+		key_code = KEY_POWER;
+		break;
+	/* Home button press,release handle */
+	case SURFACE_BUTTON_NOTIFY_PRESS_HOME:
+		pressed = true;
+		/*fall through*/
+	case SURFACE_BUTTON_NOTIFY_RELEASE_HOME:
+		key_code = KEY_LEFTMETA;
+		break;
+	/* Volume up button press,release handle */
+	case SURFACE_BUTTON_NOTIFY_PRESS_VOLUME_UP:
+		pressed = true;
+		/*fall through*/
+	case SURFACE_BUTTON_NOTIFY_RELEASE_VOLUME_UP:
+		key_code = KEY_VOLUMEUP;
+		break;
+	/* Volume down button press,release handle */
+	case SURFACE_BUTTON_NOTIFY_PRESS_VOLUME_DOWN:
+		pressed = true;
+		/*fall through*/
+	case SURFACE_BUTTON_NOTIFY_RELEASE_VOLUME_DOWN:
+		key_code = KEY_VOLUMEDOWN;
+		break;
+	default:
+		dev_info_ratelimited(&device->dev,
+				  "Unsupported event [0x%x]\n", event);
+		break;
+	}
+	input = button->input;
+	if (KEY_RESERVED == key_code)
+		return;
+	if (pressed)
+		pm_wakeup_event(&device->dev, 0);
+	if (button->suspended)
+		return;
+	input_report_key(input, key_code, pressed?1:0);
+	input_sync(input);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int surface_button_suspend(struct device *dev)
+{
+	struct acpi_device *device = to_acpi_device(dev);
+	struct surface_button *button = acpi_driver_data(device);
+
+	button->suspended = true;
+	return 0;
+}
+
+static int surface_button_resume(struct device *dev)
+{
+	struct acpi_device *device = to_acpi_device(dev);
+	struct surface_button *button = acpi_driver_data(device);
+
+	button->suspended = false;
+	return 0;
+}
+#endif
+
+static int surface_button_add(struct acpi_device *device)
+{
+	struct surface_button *button;
+	struct input_dev *input;
+	const char *hid = acpi_device_hid(device);
+	char *name;
+	int error;
+
+	if (strncmp(acpi_device_bid(device), SURFACE_BUTTON_OBJ_NAME,
+	    strlen(SURFACE_BUTTON_OBJ_NAME)))
+		return -ENODEV;
+
+	button = kzalloc(sizeof(struct surface_button), GFP_KERNEL);
+	if (!button)
+		return -ENOMEM;
+
+	device->driver_data = button;
+	button->input = input = input_allocate_device();
+	if (!input) {
+		error = -ENOMEM;
+		goto err_free_button;
+	}
+
+	name = acpi_device_name(device);
+	strcpy(name, SURFACE_BUTTON_DEVICE_NAME);
+	snprintf(button->phys, sizeof(button->phys), "%s/buttons", hid);
+
+	input->name = name;
+	input->phys = button->phys;
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = &device->dev;
+	input_set_capability(input, EV_KEY, KEY_POWER);
+	input_set_capability(input, EV_KEY, KEY_LEFTMETA);
+	input_set_capability(input, EV_KEY, KEY_VOLUMEUP);
+	input_set_capability(input, EV_KEY, KEY_VOLUMEDOWN);
+
+	error = input_register_device(input);
+	if (error)
+		goto err_free_input;
+	dev_info(&device->dev,
+			"%s [%s]\n", name, acpi_device_bid(device));
+	return 0;
+
+ err_free_input:
+	input_free_device(input);
+ err_free_button:
+	kfree(button);
+	return error;
+}
+
+static int surface_button_remove(struct acpi_device *device)
+{
+	struct surface_button *button = acpi_driver_data(device);
+
+	input_unregister_device(button->input);
+	kfree(button);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(surface_button_pm,
+		surface_button_suspend, surface_button_resume);
+
+static struct acpi_driver surface_button_driver = {
+	.name = "surface_pro3_button",
+	.class = "SurfacePro3",
+	.ids = surface_button_device_ids,
+	.ops = {
+		.add = surface_button_add,
+		.remove = surface_button_remove,
+		.notify = surface_button_notify,
+	},
+	.drv.pm = &surface_button_pm,
+};
+
+module_acpi_driver(surface_button_driver);
diff --git a/kernel/drivers/platform/x86/tc1100-wmi.c b/kernel/drivers/platform/x86/tc1100-wmi.c
index e36542564..89aa976f0 100644
--- a/kernel/drivers/platform/x86/tc1100-wmi.c
+++ b/kernel/drivers/platform/x86/tc1100-wmi.c
@@ -82,7 +82,7 @@ static int get_state(u32 *out, u8 instance)
 		tmp = 0;
 	}
 
-	if (result.length > 0 && result.pointer)
+	if (result.length > 0)
 		kfree(result.pointer);
 
 	switch (instance) {
diff --git a/kernel/drivers/platform/x86/thinkpad_acpi.c b/kernel/drivers/platform/x86/thinkpad_acpi.c
index 28f328136..0bed4733c 100644
--- a/kernel/drivers/platform/x86/thinkpad_acpi.c
+++ b/kernel/drivers/platform/x86/thinkpad_acpi.c
@@ -83,6 +83,7 @@
 #include <sound/control.h>
 #include <sound/initval.h>
 #include <asm/uaccess.h>
+#include <acpi/video.h>
 
 /* ThinkPad CMOS commands */
 #define TP_CMOS_VOLUME_DOWN	0
@@ -401,7 +402,7 @@ static const char *str_supported(int is_supported);
 #else
 static inline const char *str_supported(int is_supported) { return ""; }
 #define vdbg_printk(a_dbg_level, format, arg...)	\
-	no_printk(format, ##arg)
+	do { if (0) no_printk(format, ##arg); } while (0)
 #endif
 
 static void tpacpi_log_usertask(const char * const what)
@@ -3487,7 +3488,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	/* Do not issue duplicate brightness change events to
 	 * userspace. tpacpi_detect_brightness_capabilities() must have
 	 * been called before this point  */
-	if (acpi_video_backlight_support()) {
+	if (acpi_video_get_backlight_type() != acpi_backlight_vendor) {
 		pr_info("This ThinkPad has standard ACPI backlight "
 			"brightness control, supported by the ACPI "
 			"video driver\n");
@@ -6458,8 +6459,7 @@ static void __init tpacpi_detect_brightness_capabilities(void)
 		pr_info("detected a 8-level brightness capable ThinkPad\n");
 		break;
 	default:
-		pr_err("Unsupported brightness interface, "
-		       "please contact %s\n", TPACPI_MAIL);
+		pr_info("Unsupported brightness interface\n");
 		tp_features.bright_unkfw = 1;
 		bright_maxlvl = b - 1;
 	}
@@ -6491,7 +6491,7 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 		return 1;
 	}
 
-	if (acpi_video_backlight_support()) {
+	if (acpi_video_get_backlight_type() != acpi_backlight_vendor) {
 		if (brightness_enable > 1) {
 			pr_info("Standard ACPI backlight interface "
 				"available, not loading native one\n");
diff --git a/kernel/drivers/platform/x86/toshiba-wmi.c b/kernel/drivers/platform/x86/toshiba-wmi.c
new file mode 100644
index 000000000..feac4576b
--- /dev/null
+++ b/kernel/drivers/platform/x86/toshiba-wmi.c
@@ -0,0 +1,138 @@
+/*
+ * toshiba_wmi.c - Toshiba WMI Hotkey Driver
+ *
+ * Copyright (C) 2015 Azael Avalos <coproscefalo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+
+MODULE_AUTHOR("Azael Avalos");
+MODULE_DESCRIPTION("Toshiba WMI Hotkey Driver");
+MODULE_LICENSE("GPL");
+
+#define TOSHIBA_WMI_EVENT_GUID	"59142400-C6A3-40FA-BADB-8A2652834100"
+
+MODULE_ALIAS("wmi:"TOSHIBA_WMI_EVENT_GUID);
+
+static struct input_dev *toshiba_wmi_input_dev;
+
+static const struct key_entry toshiba_wmi_keymap[] __initconst = {
+	/* TODO: Add keymap values once found... */
+	/*{ KE_KEY, 0x00, { KEY_ } },*/
+	{ KE_END, 0 }
+};
+
+static void toshiba_wmi_notify(u32 value, void *context)
+{
+	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	acpi_status status;
+
+	status = wmi_get_event_data(value, &response);
+	if (ACPI_FAILURE(status)) {
+		pr_err("Bad event status 0x%x\n", status);
+		return;
+	}
+
+	obj = (union acpi_object *)response.pointer;
+	if (!obj)
+		return;
+
+	/* TODO: Add proper checks once we have data */
+	pr_debug("Unknown event received, obj type %x\n", obj->type);
+
+	kfree(response.pointer);
+}
+
+static int __init toshiba_wmi_input_setup(void)
+{
+	acpi_status status;
+	int err;
+
+	toshiba_wmi_input_dev = input_allocate_device();
+	if (!toshiba_wmi_input_dev)
+		return -ENOMEM;
+
+	toshiba_wmi_input_dev->name = "Toshiba WMI hotkeys";
+	toshiba_wmi_input_dev->phys = "wmi/input0";
+	toshiba_wmi_input_dev->id.bustype = BUS_HOST;
+
+	err = sparse_keymap_setup(toshiba_wmi_input_dev,
+				  toshiba_wmi_keymap, NULL);
+	if (err)
+		goto err_free_dev;
+
+	status = wmi_install_notify_handler(TOSHIBA_WMI_EVENT_GUID,
+					    toshiba_wmi_notify, NULL);
+	if (ACPI_FAILURE(status)) {
+		err = -EIO;
+		goto err_free_keymap;
+	}
+
+	err = input_register_device(toshiba_wmi_input_dev);
+	if (err)
+		goto err_remove_notifier;
+
+	return 0;
+
+ err_remove_notifier:
+	wmi_remove_notify_handler(TOSHIBA_WMI_EVENT_GUID);
+ err_free_keymap:
+	sparse_keymap_free(toshiba_wmi_input_dev);
+ err_free_dev:
+	input_free_device(toshiba_wmi_input_dev);
+	return err;
+}
+
+static void toshiba_wmi_input_destroy(void)
+{
+	wmi_remove_notify_handler(TOSHIBA_WMI_EVENT_GUID);
+	sparse_keymap_free(toshiba_wmi_input_dev);
+	input_unregister_device(toshiba_wmi_input_dev);
+}
+
+static int __init toshiba_wmi_init(void)
+{
+	int ret;
+
+	if (!wmi_has_guid(TOSHIBA_WMI_EVENT_GUID))
+		return -ENODEV;
+
+	ret = toshiba_wmi_input_setup();
+	if (ret) {
+		pr_err("Failed to setup input device\n");
+		return ret;
+	}
+
+	pr_info("Toshiba WMI Hotkey Driver\n");
+
+	return 0;
+}
+
+static void __exit toshiba_wmi_exit(void)
+{
+	if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID))
+		toshiba_wmi_input_destroy();
+}
+
+module_init(toshiba_wmi_init);
+module_exit(toshiba_wmi_exit);
diff --git a/kernel/drivers/platform/x86/toshiba_acpi.c b/kernel/drivers/platform/x86/toshiba_acpi.c
index 9956b9902..b0f62141e 100644
--- a/kernel/drivers/platform/x86/toshiba_acpi.c
+++ b/kernel/drivers/platform/x86/toshiba_acpi.c
@@ -31,7 +31,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#define TOSHIBA_ACPI_VERSION	"0.21"
+#define TOSHIBA_ACPI_VERSION	"0.23"
 #define PROC_INTERFACE_VERSION	1
 
 #include <linux/kernel.h>
@@ -41,7 +41,6 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/backlight.h>
-#include <linux/rfkill.h>
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
 #include <linux/leds.h>
@@ -51,6 +50,8 @@
 #include <linux/acpi.h>
 #include <linux/dmi.h>
 #include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/toshiba.h>
 #include <acpi/video.h>
 
 MODULE_AUTHOR("John Belmonte");
@@ -82,7 +83,7 @@ MODULE_LICENSE("GPL");
 
 #define TCI_WORDS			6
 
-/* operations */
+/* Operations */
 #define HCI_SET				0xff00
 #define HCI_GET				0xfe00
 #define SCI_OPEN			0xf100
@@ -90,8 +91,9 @@ MODULE_LICENSE("GPL");
 #define SCI_GET				0xf300
 #define SCI_SET				0xf400
 
-/* return codes */
+/* Return codes */
 #define TOS_SUCCESS			0x0000
+#define TOS_SUCCESS2			0x0001
 #define TOS_OPEN_CLOSE_OK		0x0044
 #define TOS_FAILURE			0x1000
 #define TOS_NOT_SUPPORTED		0x8000
@@ -105,14 +107,13 @@ MODULE_LICENSE("GPL");
 #define TOS_NOT_INITIALIZED		0x8d50
 #define TOS_NOT_INSTALLED		0x8e00
 
-/* registers */
+/* Registers */
 #define HCI_FAN				0x0004
 #define HCI_TR_BACKLIGHT		0x0005
 #define HCI_SYSTEM_EVENT		0x0016
 #define HCI_VIDEO_OUT			0x001c
 #define HCI_HOTKEY_EVENT		0x001e
 #define HCI_LCD_BRIGHTNESS		0x002a
-#define HCI_WIRELESS			0x0056
 #define HCI_ACCELEROMETER		0x006d
 #define HCI_KBD_ILLUMINATION		0x0095
 #define HCI_ECO_MODE			0x0097
@@ -127,10 +128,10 @@ MODULE_LICENSE("GPL");
 #define SCI_TOUCHPAD			0x050e
 #define SCI_KBD_FUNCTION_KEYS		0x0522
 
-/* field definitions */
+/* Field definitions */
 #define HCI_ACCEL_MASK			0x7fff
 #define HCI_HOTKEY_DISABLE		0x0b
-#define HCI_HOTKEY_ENABLE		0x09
+#define HCI_HOTKEY_ENABLE		0x01
 #define HCI_HOTKEY_SPECIAL_FUNCTIONS	0x10
 #define HCI_LCD_BRIGHTNESS_BITS		3
 #define HCI_LCD_BRIGHTNESS_SHIFT	(16-HCI_LCD_BRIGHTNESS_BITS)
@@ -141,10 +142,6 @@ MODULE_LICENSE("GPL");
 #define HCI_VIDEO_OUT_LCD		0x1
 #define HCI_VIDEO_OUT_CRT		0x2
 #define HCI_VIDEO_OUT_TV		0x4
-#define HCI_WIRELESS_KILL_SWITCH	0x01
-#define HCI_WIRELESS_BT_PRESENT		0x0f
-#define HCI_WIRELESS_BT_ATTACH		0x40
-#define HCI_WIRELESS_BT_POWER		0x80
 #define SCI_KBD_MODE_MASK		0x1f
 #define SCI_KBD_MODE_FNZ		0x1
 #define SCI_KBD_MODE_AUTO		0x2
@@ -165,13 +162,13 @@ MODULE_LICENSE("GPL");
 struct toshiba_acpi_dev {
 	struct acpi_device *acpi_dev;
 	const char *method_hci;
-	struct rfkill *bt_rfk;
 	struct input_dev *hotkey_dev;
 	struct work_struct hotkey_work;
 	struct backlight_device *backlight_dev;
 	struct led_classdev led_dev;
 	struct led_classdev kbd_led;
 	struct led_classdev eco_led;
+	struct miscdevice miscdev;
 
 	int force_fan;
 	int last_key_event;
@@ -191,7 +188,6 @@ struct toshiba_acpi_dev {
 	unsigned int info_supported:1;
 	unsigned int tr_backlight_supported:1;
 	unsigned int kbd_illum_supported:1;
-	unsigned int kbd_led_registered:1;
 	unsigned int touchpad_supported:1;
 	unsigned int eco_supported:1;
 	unsigned int accelerometer_supported:1;
@@ -202,8 +198,11 @@ struct toshiba_acpi_dev {
 	unsigned int panel_power_on_supported:1;
 	unsigned int usb_three_supported:1;
 	unsigned int sysfs_created:1;
+	unsigned int special_functions;
 
-	struct mutex mutex;
+	bool kbd_led_registered;
+	bool illumination_led_registered;
+	bool eco_led_registered;
 };
 
 static struct toshiba_acpi_dev *toshiba_acpi;
@@ -252,16 +251,16 @@ static const struct key_entry toshiba_acpi_keymap[] = {
 };
 
 static const struct key_entry toshiba_acpi_alt_keymap[] = {
-	{ KE_KEY, 0x157, { KEY_MUTE } },
 	{ KE_KEY, 0x102, { KEY_ZOOMOUT } },
 	{ KE_KEY, 0x103, { KEY_ZOOMIN } },
 	{ KE_KEY, 0x12c, { KEY_KBDILLUMTOGGLE } },
 	{ KE_KEY, 0x139, { KEY_ZOOMRESET } },
-	{ KE_KEY, 0x13e, { KEY_SWITCHVIDEOMODE } },
 	{ KE_KEY, 0x13c, { KEY_BRIGHTNESSDOWN } },
 	{ KE_KEY, 0x13d, { KEY_BRIGHTNESSUP } },
-	{ KE_KEY, 0x158, { KEY_WLAN } },
+	{ KE_KEY, 0x13e, { KEY_SWITCHVIDEOMODE } },
 	{ KE_KEY, 0x13f, { KEY_TOUCHPAD_TOGGLE } },
+	{ KE_KEY, 0x157, { KEY_MUTE } },
+	{ KE_KEY, 0x158, { KEY_WLAN } },
 	{ KE_END, 0 },
 };
 
@@ -330,13 +329,13 @@ static acpi_status tci_raw(struct toshiba_acpi_dev *dev,
 }
 
 /*
- * Common hci tasks (get or set one or two value)
+ * Common hci tasks
  *
  * In addition to the ACPI status, the HCI system returns a result which
  * may be useful (such as "not supported").
  */
 
-static u32 hci_write1(struct toshiba_acpi_dev *dev, u32 reg, u32 in1)
+static u32 hci_write(struct toshiba_acpi_dev *dev, u32 reg, u32 in1)
 {
 	u32 in[TCI_WORDS] = { HCI_SET, reg, in1, 0, 0, 0 };
 	u32 out[TCI_WORDS];
@@ -345,7 +344,7 @@ static u32 hci_write1(struct toshiba_acpi_dev *dev, u32 reg, u32 in1)
 	return ACPI_SUCCESS(status) ? out[0] : TOS_FAILURE;
 }
 
-static u32 hci_read1(struct toshiba_acpi_dev *dev, u32 reg, u32 *out1)
+static u32 hci_read(struct toshiba_acpi_dev *dev, u32 reg, u32 *out1)
 {
 	u32 in[TCI_WORDS] = { HCI_GET, reg, 0, 0, 0, 0 };
 	u32 out[TCI_WORDS];
@@ -359,31 +358,6 @@ static u32 hci_read1(struct toshiba_acpi_dev *dev, u32 reg, u32 *out1)
 	return out[0];
 }
 
-static u32 hci_write2(struct toshiba_acpi_dev *dev, u32 reg, u32 in1, u32 in2)
-{
-	u32 in[TCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 };
-	u32 out[TCI_WORDS];
-	acpi_status status = tci_raw(dev, in, out);
-
-	return ACPI_SUCCESS(status) ? out[0] : TOS_FAILURE;
-}
-
-static u32 hci_read2(struct toshiba_acpi_dev *dev,
-		     u32 reg, u32 *out1, u32 *out2)
-{
-	u32 in[TCI_WORDS] = { HCI_GET, reg, *out1, *out2, 0, 0 };
-	u32 out[TCI_WORDS];
-	acpi_status status = tci_raw(dev, in, out);
-
-	if (ACPI_FAILURE(status))
-		return TOS_FAILURE;
-
-	*out1 = out[2];
-	*out2 = out[3];
-
-	return out[0];
-}
-
 /*
  * Common sci tasks
  */
@@ -395,7 +369,7 @@ static int sci_open(struct toshiba_acpi_dev *dev)
 	acpi_status status;
 
 	status = tci_raw(dev, in, out);
-	if  (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+	if  (ACPI_FAILURE(status)) {
 		pr_err("ACPI call to open SCI failed\n");
 		return 0;
 	}
@@ -433,7 +407,7 @@ static void sci_close(struct toshiba_acpi_dev *dev)
 	acpi_status status;
 
 	status = tci_raw(dev, in, out);
-	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+	if (ACPI_FAILURE(status)) {
 		pr_err("ACPI call to close SCI failed\n");
 		return;
 	}
@@ -470,26 +444,24 @@ static u32 sci_write(struct toshiba_acpi_dev *dev, u32 reg, u32 in1)
 }
 
 /* Illumination support */
-static int toshiba_illumination_available(struct toshiba_acpi_dev *dev)
+static void toshiba_illumination_available(struct toshiba_acpi_dev *dev)
 {
 	u32 in[TCI_WORDS] = { SCI_GET, SCI_ILLUMINATION, 0, 0, 0, 0 };
 	u32 out[TCI_WORDS];
 	acpi_status status;
 
+	dev->illumination_supported = 0;
+	dev->illumination_led_registered = false;
+
 	if (!sci_open(dev))
-		return 0;
+		return;
 
 	status = tci_raw(dev, in, out);
 	sci_close(dev);
-	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+	if (ACPI_FAILURE(status))
 		pr_err("ACPI call to query Illumination support failed\n");
-		return 0;
-	} else if (out[0] == TOS_NOT_SUPPORTED) {
-		pr_info("Illumination device not available\n");
-		return 0;
-	}
-
-	return 1;
+	else if (out[0] == TOS_SUCCESS)
+		dev->illumination_supported = 1;
 }
 
 static void toshiba_illumination_set(struct led_classdev *cdev,
@@ -497,7 +469,8 @@ static void toshiba_illumination_set(struct led_classdev *cdev,
 {
 	struct toshiba_acpi_dev *dev = container_of(cdev,
 			struct toshiba_acpi_dev, led_dev);
-	u32 state, result;
+	u32 result;
+	u32 state;
 
 	/* First request : initialize communication. */
 	if (!sci_open(dev))
@@ -507,13 +480,8 @@ static void toshiba_illumination_set(struct led_classdev *cdev,
 	state = brightness ? 1 : 0;
 	result = sci_write(dev, SCI_ILLUMINATION, state);
 	sci_close(dev);
-	if (result == TOS_FAILURE) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call for illumination failed\n");
-		return;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("Illumination not supported\n");
-		return;
-	}
 }
 
 static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
@@ -522,18 +490,17 @@ static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
 			struct toshiba_acpi_dev, led_dev);
 	u32 state, result;
 
-	/* First request : initialize communication. */
+	/* First request : initialize communication. */
 	if (!sci_open(dev))
 		return LED_OFF;
 
 	/* Check the illumination */
 	result = sci_read(dev, SCI_ILLUMINATION, &state);
 	sci_close(dev);
-	if (result == TOS_FAILURE || result == TOS_INPUT_DATA_ERROR) {
+	if (result == TOS_FAILURE) {
 		pr_err("ACPI call for illumination failed\n");
 		return LED_OFF;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("Illumination not supported\n");
+	} else if (result != TOS_SUCCESS) {
 		return LED_OFF;
 	}
 
@@ -541,41 +508,40 @@ static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
 }
 
 /* KBD Illumination */
-static int toshiba_kbd_illum_available(struct toshiba_acpi_dev *dev)
+static void toshiba_kbd_illum_available(struct toshiba_acpi_dev *dev)
 {
 	u32 in[TCI_WORDS] = { SCI_GET, SCI_KBD_ILLUM_STATUS, 0, 0, 0, 0 };
 	u32 out[TCI_WORDS];
 	acpi_status status;
 
+	dev->kbd_illum_supported = 0;
+	dev->kbd_led_registered = false;
+
 	if (!sci_open(dev))
-		return 0;
+		return;
 
 	status = tci_raw(dev, in, out);
 	sci_close(dev);
-	if (ACPI_FAILURE(status) || out[0] == TOS_INPUT_DATA_ERROR) {
+	if (ACPI_FAILURE(status)) {
 		pr_err("ACPI call to query kbd illumination support failed\n");
-		return 0;
-	} else if (out[0] == TOS_NOT_SUPPORTED) {
-		pr_info("Keyboard illumination not available\n");
-		return 0;
+	} else if (out[0] == TOS_SUCCESS) {
+		/*
+		 * Check for keyboard backlight timeout max value,
+		 * previous kbd backlight implementation set this to
+		 * 0x3c0003, and now the new implementation set this
+		 * to 0x3c001a, use this to distinguish between them.
+		 */
+		if (out[3] == SCI_KBD_TIME_MAX)
+			dev->kbd_type = 2;
+		else
+			dev->kbd_type = 1;
+		/* Get the current keyboard backlight mode */
+		dev->kbd_mode = out[2] & SCI_KBD_MODE_MASK;
+		/* Get the current time (1-60 seconds) */
+		dev->kbd_time = out[2] >> HCI_MISC_SHIFT;
+		/* Flag as supported */
+		dev->kbd_illum_supported = 1;
 	}
-
-	/*
-	 * Check for keyboard backlight timeout max value,
-	 * previous kbd backlight implementation set this to
-	 * 0x3c0003, and now the new implementation set this
-	 * to 0x3c001a, use this to distinguish between them.
-	 */
-	if (out[3] == SCI_KBD_TIME_MAX)
-		dev->kbd_type = 2;
-	else
-		dev->kbd_type = 1;
-	/* Get the current keyboard backlight mode */
-	dev->kbd_mode = out[2] & SCI_KBD_MODE_MASK;
-	/* Get the current time (1-60 seconds) */
-	dev->kbd_time = out[2] >> HCI_MISC_SHIFT;
-
-	return 1;
 }
 
 static int toshiba_kbd_illum_status_set(struct toshiba_acpi_dev *dev, u32 time)
@@ -587,15 +553,12 @@ static int toshiba_kbd_illum_status_set(struct toshiba_acpi_dev *dev, u32 time)
 
 	result = sci_write(dev, SCI_KBD_ILLUM_STATUS, time);
 	sci_close(dev);
-	if (result == TOS_FAILURE || result == TOS_INPUT_DATA_ERROR) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to set KBD backlight status failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("Keyboard backlight status not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	}
 
-	return 0;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static int toshiba_kbd_illum_status_get(struct toshiba_acpi_dev *dev, u32 *time)
@@ -607,30 +570,27 @@ static int toshiba_kbd_illum_status_get(struct toshiba_acpi_dev *dev, u32 *time)
 
 	result = sci_read(dev, SCI_KBD_ILLUM_STATUS, time);
 	sci_close(dev);
-	if (result == TOS_FAILURE || result == TOS_INPUT_DATA_ERROR) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to get KBD backlight status failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("Keyboard backlight status not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	}
 
-	return 0;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static enum led_brightness toshiba_kbd_backlight_get(struct led_classdev *cdev)
 {
 	struct toshiba_acpi_dev *dev = container_of(cdev,
 			struct toshiba_acpi_dev, kbd_led);
-	u32 state, result;
+	u32 result;
+	u32 state;
 
 	/* Check the keyboard backlight state */
-	result = hci_read1(dev, HCI_KBD_ILLUMINATION, &state);
-	if (result == TOS_FAILURE || result == TOS_INPUT_DATA_ERROR) {
+	result = hci_read(dev, HCI_KBD_ILLUMINATION, &state);
+	if (result == TOS_FAILURE) {
 		pr_err("ACPI call to get the keyboard backlight failed\n");
 		return LED_OFF;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("Keyboard backlight not supported\n");
+	} else if (result != TOS_SUCCESS) {
 		return LED_OFF;
 	}
 
@@ -642,18 +602,14 @@ static void toshiba_kbd_backlight_set(struct led_classdev *cdev,
 {
 	struct toshiba_acpi_dev *dev = container_of(cdev,
 			struct toshiba_acpi_dev, kbd_led);
-	u32 state, result;
+	u32 result;
+	u32 state;
 
 	/* Set the keyboard backlight state */
 	state = brightness ? 1 : 0;
-	result = hci_write1(dev, HCI_KBD_ILLUMINATION, state);
-	if (result == TOS_FAILURE || result == TOS_INPUT_DATA_ERROR) {
+	result = hci_write(dev, HCI_KBD_ILLUMINATION, state);
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to set KBD Illumination mode failed\n");
-		return;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("Keyboard backlight not supported\n");
-		return;
-	}
 }
 
 /* TouchPad support */
@@ -666,14 +622,12 @@ static int toshiba_touchpad_set(struct toshiba_acpi_dev *dev, u32 state)
 
 	result = sci_write(dev, SCI_TOUCHPAD, state);
 	sci_close(dev);
-	if (result == TOS_FAILURE) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to set the touchpad failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	}
 
-	return 0;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static int toshiba_touchpad_get(struct toshiba_acpi_dev *dev, u32 *state)
@@ -685,28 +639,27 @@ static int toshiba_touchpad_get(struct toshiba_acpi_dev *dev, u32 *state)
 
 	result = sci_read(dev, SCI_TOUCHPAD, state);
 	sci_close(dev);
-	if (result == TOS_FAILURE) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to query the touchpad failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	}
 
-	return 0;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 /* Eco Mode support */
-static int toshiba_eco_mode_available(struct toshiba_acpi_dev *dev)
+static void toshiba_eco_mode_available(struct toshiba_acpi_dev *dev)
 {
 	acpi_status status;
 	u32 in[TCI_WORDS] = { HCI_GET, HCI_ECO_MODE, 0, 0, 0, 0 };
 	u32 out[TCI_WORDS];
 
+	dev->eco_supported = 0;
+	dev->eco_led_registered = false;
+
 	status = tci_raw(dev, in, out);
-	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+	if (ACPI_FAILURE(status)) {
 		pr_err("ACPI call to get ECO led failed\n");
-	} else if (out[0] == TOS_NOT_INSTALLED) {
-		pr_info("ECO led not installed");
 	} else if (out[0] == TOS_INPUT_DATA_ERROR) {
 		/*
 		 * If we receive 0x8300 (Input Data Error), it means that the
@@ -719,13 +672,11 @@ static int toshiba_eco_mode_available(struct toshiba_acpi_dev *dev)
 		 */
 		in[3] = 1;
 		status = tci_raw(dev, in, out);
-		if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE)
+		if (ACPI_FAILURE(status))
 			pr_err("ACPI call to get ECO led failed\n");
 		else if (out[0] == TOS_SUCCESS)
-			return 1;
+			dev->eco_supported = 1;
 	}
-
-	return 0;
 }
 
 static enum led_brightness
@@ -738,9 +689,11 @@ toshiba_eco_mode_get_status(struct led_classdev *cdev)
 	acpi_status status;
 
 	status = tci_raw(dev, in, out);
-	if (ACPI_FAILURE(status) || out[0] == TOS_INPUT_DATA_ERROR) {
+	if (ACPI_FAILURE(status)) {
 		pr_err("ACPI call to get ECO led failed\n");
 		return LED_OFF;
+	} else if (out[0] != TOS_SUCCESS) {
+		return LED_OFF;
 	}
 
 	return out[2] ? LED_FULL : LED_OFF;
@@ -758,41 +711,32 @@ static void toshiba_eco_mode_set_status(struct led_classdev *cdev,
 	/* Switch the Eco Mode led on/off */
 	in[2] = (brightness) ? 1 : 0;
 	status = tci_raw(dev, in, out);
-	if (ACPI_FAILURE(status) || out[0] == TOS_INPUT_DATA_ERROR) {
+	if (ACPI_FAILURE(status))
 		pr_err("ACPI call to set ECO led failed\n");
-		return;
-	}
 }
 
 /* Accelerometer support */
-static int toshiba_accelerometer_supported(struct toshiba_acpi_dev *dev)
+static void toshiba_accelerometer_available(struct toshiba_acpi_dev *dev)
 {
 	u32 in[TCI_WORDS] = { HCI_GET, HCI_ACCELEROMETER2, 0, 0, 0, 0 };
 	u32 out[TCI_WORDS];
 	acpi_status status;
 
+	dev->accelerometer_supported = 0;
+
 	/*
 	 * Check if the accelerometer call exists,
 	 * this call also serves as initialization
 	 */
 	status = tci_raw(dev, in, out);
-	if (ACPI_FAILURE(status) || out[0] == TOS_INPUT_DATA_ERROR) {
+	if (ACPI_FAILURE(status))
 		pr_err("ACPI call to query the accelerometer failed\n");
-		return -EIO;
-	} else if (out[0] == TOS_DATA_NOT_AVAILABLE ||
-		   out[0] == TOS_NOT_INITIALIZED) {
-		pr_err("Accelerometer not initialized\n");
-		return -EIO;
-	} else if (out[0] == TOS_NOT_SUPPORTED) {
-		pr_info("Accelerometer not supported\n");
-		return -ENODEV;
-	}
-
-	return 0;
+	else if (out[0] == TOS_SUCCESS)
+		dev->accelerometer_supported = 1;
 }
 
 static int toshiba_accelerometer_get(struct toshiba_acpi_dev *dev,
-				      u32 *xy, u32 *z)
+				     u32 *xy, u32 *z)
 {
 	u32 in[TCI_WORDS] = { HCI_GET, HCI_ACCELEROMETER, 0, 1, 0, 0 };
 	u32 out[TCI_WORDS];
@@ -800,15 +744,18 @@ static int toshiba_accelerometer_get(struct toshiba_acpi_dev *dev,
 
 	/* Check the Accelerometer status */
 	status = tci_raw(dev, in, out);
-	if (ACPI_FAILURE(status) || out[0] == TOS_INPUT_DATA_ERROR) {
+	if (ACPI_FAILURE(status)) {
 		pr_err("ACPI call to query the accelerometer failed\n");
 		return -EIO;
+	} else if (out[0] == TOS_NOT_SUPPORTED) {
+		return -ENODEV;
+	} else if (out[0] == TOS_SUCCESS) {
+		*xy = out[2];
+		*z = out[4];
+		return 0;
 	}
 
-	*xy = out[2];
-	*z = out[4];
-
-	return 0;
+	return -EIO;
 }
 
 /* Sleep (Charge and Music) utilities support */
@@ -818,19 +765,17 @@ static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev)
 	u32 out[TCI_WORDS];
 	acpi_status status;
 
-	/* Set the feature to "not supported" in case of error */
 	dev->usb_sleep_charge_supported = 0;
 
 	if (!sci_open(dev))
 		return;
 
 	status = tci_raw(dev, in, out);
-	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+	if (ACPI_FAILURE(status)) {
 		pr_err("ACPI call to get USB Sleep and Charge mode failed\n");
 		sci_close(dev);
 		return;
 	} else if (out[0] == TOS_NOT_SUPPORTED) {
-		pr_info("USB Sleep and Charge not supported\n");
 		sci_close(dev);
 		return;
 	} else if (out[0] == TOS_SUCCESS) {
@@ -839,25 +784,15 @@ static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev)
 
 	in[5] = SCI_USB_CHARGE_BAT_LVL;
 	status = tci_raw(dev, in, out);
-	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+	sci_close(dev);
+	if (ACPI_FAILURE(status)) {
 		pr_err("ACPI call to get USB Sleep and Charge mode failed\n");
-		sci_close(dev);
-		return;
-	} else if (out[0] == TOS_NOT_SUPPORTED) {
-		pr_info("USB Sleep and Charge not supported\n");
-		sci_close(dev);
-		return;
 	} else if (out[0] == TOS_SUCCESS) {
 		dev->usbsc_bat_level = out[2];
-		/*
-		 * If we reach this point, it means that the laptop has support
-		 * for this feature and all values are initialized.
-		 * Set it as supported.
-		 */
+		/* Flag as supported */
 		dev->usb_sleep_charge_supported = 1;
 	}
 
-	sci_close(dev);
 }
 
 static int toshiba_usb_sleep_charge_get(struct toshiba_acpi_dev *dev,
@@ -870,17 +805,12 @@ static int toshiba_usb_sleep_charge_get(struct toshiba_acpi_dev *dev,
 
 	result = sci_read(dev, SCI_USB_SLEEP_CHARGE, mode);
 	sci_close(dev);
-	if (result == TOS_FAILURE) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to set USB S&C mode failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("USB Sleep and Charge not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	} else if (result == TOS_INPUT_DATA_ERROR) {
-		return -EIO;
-	}
 
-	return 0;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static int toshiba_usb_sleep_charge_set(struct toshiba_acpi_dev *dev,
@@ -893,17 +823,12 @@ static int toshiba_usb_sleep_charge_set(struct toshiba_acpi_dev *dev,
 
 	result = sci_write(dev, SCI_USB_SLEEP_CHARGE, mode);
 	sci_close(dev);
-	if (result == TOS_FAILURE) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to set USB S&C mode failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("USB Sleep and Charge not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	} else if (result == TOS_INPUT_DATA_ERROR) {
-		return -EIO;
-	}
 
-	return 0;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static int toshiba_sleep_functions_status_get(struct toshiba_acpi_dev *dev,
@@ -919,19 +844,16 @@ static int toshiba_sleep_functions_status_get(struct toshiba_acpi_dev *dev,
 	in[5] = SCI_USB_CHARGE_BAT_LVL;
 	status = tci_raw(dev, in, out);
 	sci_close(dev);
-	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+	if (ACPI_FAILURE(status)) {
 		pr_err("ACPI call to get USB S&C battery level failed\n");
-		return -EIO;
 	} else if (out[0] == TOS_NOT_SUPPORTED) {
-		pr_info("USB Sleep and Charge not supported\n");
 		return -ENODEV;
-	} else if (out[0] == TOS_INPUT_DATA_ERROR) {
-		return -EIO;
+	} else if (out[0] == TOS_SUCCESS) {
+		*mode = out[2];
+		return 0;
 	}
 
-	*mode = out[2];
-
-	return 0;
+	return -EIO;
 }
 
 static int toshiba_sleep_functions_status_set(struct toshiba_acpi_dev *dev,
@@ -948,17 +870,12 @@ static int toshiba_sleep_functions_status_set(struct toshiba_acpi_dev *dev,
 	in[5] = SCI_USB_CHARGE_BAT_LVL;
 	status = tci_raw(dev, in, out);
 	sci_close(dev);
-	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+	if (ACPI_FAILURE(status))
 		pr_err("ACPI call to set USB S&C battery level failed\n");
-		return -EIO;
-	} else if (out[0] == TOS_NOT_SUPPORTED) {
-		pr_info("USB Sleep and Charge not supported\n");
+	else if (out[0] == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	} else if (out[0] == TOS_INPUT_DATA_ERROR) {
-		return -EIO;
-	}
 
-	return 0;
+	return out[0] == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev,
@@ -974,18 +891,16 @@ static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev,
 	in[5] = SCI_USB_CHARGE_RAPID_DSP;
 	status = tci_raw(dev, in, out);
 	sci_close(dev);
-	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+	if (ACPI_FAILURE(status)) {
 		pr_err("ACPI call to get USB Rapid Charge failed\n");
-		return -EIO;
-	} else if (out[0] == TOS_NOT_SUPPORTED ||
-		   out[0] == TOS_INPUT_DATA_ERROR) {
-		pr_info("USB Rapid Charge not supported\n");
+	} else if (out[0] == TOS_NOT_SUPPORTED) {
 		return -ENODEV;
+	} else if (out[0] == TOS_SUCCESS || out[0] == TOS_SUCCESS2) {
+		*state = out[2];
+		return 0;
 	}
 
-	*state = out[2];
-
-	return 0;
+	return -EIO;
 }
 
 static int toshiba_usb_rapid_charge_set(struct toshiba_acpi_dev *dev,
@@ -1002,17 +917,12 @@ static int toshiba_usb_rapid_charge_set(struct toshiba_acpi_dev *dev,
 	in[5] = SCI_USB_CHARGE_RAPID_DSP;
 	status = tci_raw(dev, in, out);
 	sci_close(dev);
-	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+	if (ACPI_FAILURE(status))
 		pr_err("ACPI call to set USB Rapid Charge failed\n");
-		return -EIO;
-	} else if (out[0] == TOS_NOT_SUPPORTED) {
-		pr_info("USB Rapid Charge not supported\n");
+	else if (out[0] == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	} else if (out[0] == TOS_INPUT_DATA_ERROR) {
-		return -EIO;
-	}
 
-	return 0;
+	return (out[0] == TOS_SUCCESS || out[0] == TOS_SUCCESS2) ? 0 : -EIO;
 }
 
 static int toshiba_usb_sleep_music_get(struct toshiba_acpi_dev *dev, u32 *state)
@@ -1024,17 +934,12 @@ static int toshiba_usb_sleep_music_get(struct toshiba_acpi_dev *dev, u32 *state)
 
 	result = sci_read(dev, SCI_USB_SLEEP_MUSIC, state);
 	sci_close(dev);
-	if (result == TOS_FAILURE) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to get Sleep and Music failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("Sleep and Music not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	} else if (result == TOS_INPUT_DATA_ERROR) {
-		return -EIO;
-	}
 
-	return 0;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static int toshiba_usb_sleep_music_set(struct toshiba_acpi_dev *dev, u32 state)
@@ -1046,17 +951,12 @@ static int toshiba_usb_sleep_music_set(struct toshiba_acpi_dev *dev, u32 state)
 
 	result = sci_write(dev, SCI_USB_SLEEP_MUSIC, state);
 	sci_close(dev);
-	if (result == TOS_FAILURE) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to set Sleep and Music failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("Sleep and Music not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	} else if (result == TOS_INPUT_DATA_ERROR) {
-		return -EIO;
-	}
 
-	return 0;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 /* Keyboard function keys */
@@ -1069,15 +969,12 @@ static int toshiba_function_keys_get(struct toshiba_acpi_dev *dev, u32 *mode)
 
 	result = sci_read(dev, SCI_KBD_FUNCTION_KEYS, mode);
 	sci_close(dev);
-	if (result == TOS_FAILURE || result == TOS_INPUT_DATA_ERROR) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to get KBD function keys failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("KBD function keys not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	}
 
-	return 0;
+	return (result == TOS_SUCCESS || result == TOS_SUCCESS2) ? 0 : -EIO;
 }
 
 static int toshiba_function_keys_set(struct toshiba_acpi_dev *dev, u32 mode)
@@ -1089,15 +986,12 @@ static int toshiba_function_keys_set(struct toshiba_acpi_dev *dev, u32 mode)
 
 	result = sci_write(dev, SCI_KBD_FUNCTION_KEYS, mode);
 	sci_close(dev);
-	if (result == TOS_FAILURE || result == TOS_INPUT_DATA_ERROR) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to set KBD function keys failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("KBD function keys not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	}
 
-	return 0;
+	return (result == TOS_SUCCESS || result == TOS_SUCCESS2) ? 0 : -EIO;
 }
 
 /* Panel Power ON */
@@ -1110,17 +1004,12 @@ static int toshiba_panel_power_on_get(struct toshiba_acpi_dev *dev, u32 *state)
 
 	result = sci_read(dev, SCI_PANEL_POWER_ON, state);
 	sci_close(dev);
-	if (result == TOS_FAILURE) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to get Panel Power ON failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("Panel Power on not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	} else if (result == TOS_INPUT_DATA_ERROR) {
-		return -EIO;
-	}
 
-	return 0;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static int toshiba_panel_power_on_set(struct toshiba_acpi_dev *dev, u32 state)
@@ -1132,17 +1021,12 @@ static int toshiba_panel_power_on_set(struct toshiba_acpi_dev *dev, u32 state)
 
 	result = sci_write(dev, SCI_PANEL_POWER_ON, state);
 	sci_close(dev);
-	if (result == TOS_FAILURE) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to set Panel Power ON failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("Panel Power ON not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	} else if (result == TOS_INPUT_DATA_ERROR) {
-		return -EIO;
-	}
 
-	return 0;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 /* USB Three */
@@ -1155,17 +1039,12 @@ static int toshiba_usb_three_get(struct toshiba_acpi_dev *dev, u32 *state)
 
 	result = sci_read(dev, SCI_USB_THREE, state);
 	sci_close(dev);
-	if (result == TOS_FAILURE) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to get USB 3 failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("USB 3 not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	} else if (result == TOS_INPUT_DATA_ERROR) {
-		return -EIO;
-	}
 
-	return 0;
+	return (result == TOS_SUCCESS || result == TOS_SUCCESS2) ? 0 : -EIO;
 }
 
 static int toshiba_usb_three_set(struct toshiba_acpi_dev *dev, u32 state)
@@ -1177,172 +1056,85 @@ static int toshiba_usb_three_set(struct toshiba_acpi_dev *dev, u32 state)
 
 	result = sci_write(dev, SCI_USB_THREE, state);
 	sci_close(dev);
-	if (result == TOS_FAILURE) {
+	if (result == TOS_FAILURE)
 		pr_err("ACPI call to set USB 3 failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("USB 3 not supported\n");
+	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
-	} else if (result == TOS_INPUT_DATA_ERROR) {
-		return -EIO;
-	}
 
-	return 0;
+	return (result == TOS_SUCCESS || result == TOS_SUCCESS2) ? 0 : -EIO;
 }
 
 /* Hotkey Event type */
 static int toshiba_hotkey_event_type_get(struct toshiba_acpi_dev *dev,
 					 u32 *type)
 {
-	u32 val1 = 0x03;
-	u32 val2 = 0;
-	u32 result;
+	u32 in[TCI_WORDS] = { HCI_GET, HCI_SYSTEM_INFO, 0x03, 0, 0, 0 };
+	u32 out[TCI_WORDS];
+	acpi_status status;
 
-	result = hci_read2(dev, HCI_SYSTEM_INFO, &val1, &val2);
-	if (result == TOS_FAILURE) {
+	status = tci_raw(dev, in, out);
+	if (ACPI_FAILURE(status)) {
 		pr_err("ACPI call to get System type failed\n");
-		return -EIO;
-	} else if (result == TOS_NOT_SUPPORTED) {
-		pr_info("System type not supported\n");
+	} else if (out[0] == TOS_NOT_SUPPORTED) {
 		return -ENODEV;
+	} else if (out[0] == TOS_SUCCESS) {
+		*type = out[3];
+		return 0;
 	}
 
-	*type = val2;
-
-	return 0;
-}
-
-/* Bluetooth rfkill handlers */
-
-static u32 hci_get_bt_present(struct toshiba_acpi_dev *dev, bool *present)
-{
-	u32 hci_result;
-	u32 value, value2;
-
-	value = 0;
-	value2 = 0;
-	hci_result = hci_read2(dev, HCI_WIRELESS, &value, &value2);
-	if (hci_result == TOS_SUCCESS)
-		*present = (value & HCI_WIRELESS_BT_PRESENT) ? true : false;
-
-	return hci_result;
-}
-
-static u32 hci_get_radio_state(struct toshiba_acpi_dev *dev, bool *radio_state)
-{
-	u32 hci_result;
-	u32 value, value2;
-
-	value = 0;
-	value2 = 0x0001;
-	hci_result = hci_read2(dev, HCI_WIRELESS, &value, &value2);
-
-	*radio_state = value & HCI_WIRELESS_KILL_SWITCH;
-	return hci_result;
-}
-
-static int bt_rfkill_set_block(void *data, bool blocked)
-{
-	struct toshiba_acpi_dev *dev = data;
-	u32 result1, result2;
-	u32 value;
-	int err;
-	bool radio_state;
-
-	value = (blocked == false);
-
-	mutex_lock(&dev->mutex);
-	if (hci_get_radio_state(dev, &radio_state) != TOS_SUCCESS) {
-		err = -EIO;
-		goto out;
-	}
-
-	if (!radio_state) {
-		err = 0;
-		goto out;
-	}
-
-	result1 = hci_write2(dev, HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER);
-	result2 = hci_write2(dev, HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH);
-
-	if (result1 != TOS_SUCCESS || result2 != TOS_SUCCESS)
-		err = -EIO;
-	else
-		err = 0;
- out:
-	mutex_unlock(&dev->mutex);
-	return err;
+	return -EIO;
 }
 
-static void bt_rfkill_poll(struct rfkill *rfkill, void *data)
+/* Transflective Backlight */
+static int get_tr_backlight_status(struct toshiba_acpi_dev *dev, u32 *status)
 {
-	bool new_rfk_state;
-	bool value;
-	u32 hci_result;
-	struct toshiba_acpi_dev *dev = data;
-
-	mutex_lock(&dev->mutex);
-
-	hci_result = hci_get_radio_state(dev, &value);
-	if (hci_result != TOS_SUCCESS) {
-		/* Can't do anything useful */
-		mutex_unlock(&dev->mutex);
-		return;
-	}
+	u32 result = hci_read(dev, HCI_TR_BACKLIGHT, status);
 
-	new_rfk_state = value;
-
-	mutex_unlock(&dev->mutex);
+	if (result == TOS_FAILURE)
+		pr_err("ACPI call to get Transflective Backlight failed\n");
+	else if (result == TOS_NOT_SUPPORTED)
+		return -ENODEV;
 
-	if (rfkill_set_hw_state(rfkill, !new_rfk_state))
-		bt_rfkill_set_block(data, true);
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
-static const struct rfkill_ops toshiba_rfk_ops = {
-	.set_block = bt_rfkill_set_block,
-	.poll = bt_rfkill_poll,
-};
-
-static int get_tr_backlight_status(struct toshiba_acpi_dev *dev, bool *enabled)
+static int set_tr_backlight_status(struct toshiba_acpi_dev *dev, u32 status)
 {
-	u32 hci_result;
-	u32 status;
+	u32 result = hci_write(dev, HCI_TR_BACKLIGHT, !status);
 
-	hci_result = hci_read1(dev, HCI_TR_BACKLIGHT, &status);
-	*enabled = !status;
-	return hci_result == TOS_SUCCESS ? 0 : -EIO;
-}
-
-static int set_tr_backlight_status(struct toshiba_acpi_dev *dev, bool enable)
-{
-	u32 hci_result;
-	u32 value = !enable;
+	if (result == TOS_FAILURE)
+		pr_err("ACPI call to set Transflective Backlight failed\n");
+	else if (result == TOS_NOT_SUPPORTED)
+		return -ENODEV;
 
-	hci_result = hci_write1(dev, HCI_TR_BACKLIGHT, value);
-	return hci_result == TOS_SUCCESS ? 0 : -EIO;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
-static struct proc_dir_entry *toshiba_proc_dir /*= 0*/;
+static struct proc_dir_entry *toshiba_proc_dir;
 
+/* LCD Brightness */
 static int __get_lcd_brightness(struct toshiba_acpi_dev *dev)
 {
-	u32 hci_result;
+	u32 result;
 	u32 value;
 	int brightness = 0;
 
 	if (dev->tr_backlight_supported) {
-		bool enabled;
-		int ret = get_tr_backlight_status(dev, &enabled);
+		int ret = get_tr_backlight_status(dev, &value);
 
 		if (ret)
 			return ret;
-		if (enabled)
+		if (value)
 			return 0;
 		brightness++;
 	}
 
-	hci_result = hci_read1(dev, HCI_LCD_BRIGHTNESS, &value);
-	if (hci_result == TOS_SUCCESS)
+	result = hci_read(dev, HCI_LCD_BRIGHTNESS, &value);
+	if (result == TOS_FAILURE)
+		pr_err("ACPI call to get LCD Brightness failed\n");
+	else if (result == TOS_NOT_SUPPORTED)
+		return -ENODEV;
+	if (result == TOS_SUCCESS)
 		return brightness + (value >> HCI_LCD_BRIGHTNESS_SHIFT);
 
 	return -EIO;
@@ -1358,8 +1150,8 @@ static int get_lcd_brightness(struct backlight_device *bd)
 static int lcd_proc_show(struct seq_file *m, void *v)
 {
 	struct toshiba_acpi_dev *dev = m->private;
-	int value;
 	int levels;
+	int value;
 
 	if (!dev->backlight_dev)
 		return -ENODEV;
@@ -1373,6 +1165,7 @@ static int lcd_proc_show(struct seq_file *m, void *v)
 	}
 
 	pr_err("Error reading LCD brightness\n");
+
 	return -EIO;
 }
 
@@ -1383,11 +1176,10 @@ static int lcd_proc_open(struct inode *inode, struct file *file)
 
 static int set_lcd_brightness(struct toshiba_acpi_dev *dev, int value)
 {
-	u32 hci_result;
+	u32 result;
 
 	if (dev->tr_backlight_supported) {
-		bool enable = !value;
-		int ret = set_tr_backlight_status(dev, enable);
+		int ret = set_tr_backlight_status(dev, !value);
 
 		if (ret)
 			return ret;
@@ -1396,8 +1188,13 @@ static int set_lcd_brightness(struct toshiba_acpi_dev *dev, int value)
 	}
 
 	value = value << HCI_LCD_BRIGHTNESS_SHIFT;
-	hci_result = hci_write1(dev, HCI_LCD_BRIGHTNESS, value);
-	return hci_result == TOS_SUCCESS ? 0 : -EIO;
+	result = hci_write(dev, HCI_LCD_BRIGHTNESS, value);
+	if (result == TOS_FAILURE)
+		pr_err("ACPI call to set LCD Brightness failed\n");
+	else if (result == TOS_NOT_SUPPORTED)
+		return -ENODEV;
+
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static int set_lcd_status(struct backlight_device *bd)
@@ -1413,24 +1210,22 @@ static ssize_t lcd_proc_write(struct file *file, const char __user *buf,
 	struct toshiba_acpi_dev *dev = PDE_DATA(file_inode(file));
 	char cmd[42];
 	size_t len;
-	int value;
-	int ret;
 	int levels = dev->backlight_dev->props.max_brightness + 1;
+	int value;
 
 	len = min(count, sizeof(cmd) - 1);
 	if (copy_from_user(cmd, buf, len))
 		return -EFAULT;
 	cmd[len] = '\0';
 
-	if (sscanf(cmd, " brightness : %i", &value) == 1 &&
-	    value >= 0 && value < levels) {
-		ret = set_lcd_brightness(dev, value);
-		if (ret == 0)
-			ret = count;
-	} else {
-		ret = -EINVAL;
-	}
-	return ret;
+	if (sscanf(cmd, " brightness : %i", &value) != 1 &&
+	    value < 0 && value > levels)
+		return -EINVAL;
+
+	if (set_lcd_brightness(dev, value))
+		return -EIO;
+
+	return count;
 }
 
 static const struct file_operations lcd_proc_fops = {
@@ -1442,22 +1237,25 @@ static const struct file_operations lcd_proc_fops = {
 	.write		= lcd_proc_write,
 };
 
+/* Video-Out */
 static int get_video_status(struct toshiba_acpi_dev *dev, u32 *status)
 {
-	u32 hci_result;
+	u32 result = hci_read(dev, HCI_VIDEO_OUT, status);
 
-	hci_result = hci_read1(dev, HCI_VIDEO_OUT, status);
-	return hci_result == TOS_SUCCESS ? 0 : -EIO;
+	if (result == TOS_FAILURE)
+		pr_err("ACPI call to get Video-Out failed\n");
+	else if (result == TOS_NOT_SUPPORTED)
+		return -ENODEV;
+
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static int video_proc_show(struct seq_file *m, void *v)
 {
 	struct toshiba_acpi_dev *dev = m->private;
 	u32 value;
-	int ret;
 
-	ret = get_video_status(dev, &value);
-	if (!ret) {
+	if (!get_video_status(dev, &value)) {
 		int is_lcd = (value & HCI_VIDEO_OUT_LCD) ? 1 : 0;
 		int is_crt = (value & HCI_VIDEO_OUT_CRT) ? 1 : 0;
 		int is_tv = (value & HCI_VIDEO_OUT_TV) ? 1 : 0;
@@ -1465,9 +1263,10 @@ static int video_proc_show(struct seq_file *m, void *v)
 		seq_printf(m, "lcd_out:                 %d\n", is_lcd);
 		seq_printf(m, "crt_out:                 %d\n", is_crt);
 		seq_printf(m, "tv_out:                  %d\n", is_tv);
+		return 0;
 	}
 
-	return ret;
+	return -EIO;
 }
 
 static int video_proc_open(struct inode *inode, struct file *file)
@@ -1479,13 +1278,14 @@ static ssize_t video_proc_write(struct file *file, const char __user *buf,
 				size_t count, loff_t *pos)
 {
 	struct toshiba_acpi_dev *dev = PDE_DATA(file_inode(file));
-	char *cmd, *buffer;
-	int ret;
-	int value;
+	char *buffer;
+	char *cmd;
 	int remain = count;
 	int lcd_out = -1;
 	int crt_out = -1;
 	int tv_out = -1;
+	int value;
+	int ret;
 	u32 video_out;
 
 	cmd = kmalloc(count + 1, GFP_KERNEL);
@@ -1531,12 +1331,13 @@ static ssize_t video_proc_write(struct file *file, const char __user *buf,
 			_set_bit(&new_video_out, HCI_VIDEO_OUT_TV, tv_out);
 		/*
 		 * To avoid unnecessary video disruption, only write the new
-		 * video setting if something changed. */
+		 * video setting if something changed.
+		 */
 		if (new_video_out != video_out)
 			ret = write_acpi_int(METHOD_VIDEO_OUT, new_video_out);
 	}
 
-	return ret ? ret : count;
+	return ret ? -EIO : count;
 }
 
 static const struct file_operations video_proc_fops = {
@@ -1548,27 +1349,43 @@ static const struct file_operations video_proc_fops = {
 	.write		= video_proc_write,
 };
 
+/* Fan status */
 static int get_fan_status(struct toshiba_acpi_dev *dev, u32 *status)
 {
-	u32 hci_result;
+	u32 result = hci_read(dev, HCI_FAN, status);
 
-	hci_result = hci_read1(dev, HCI_FAN, status);
-	return hci_result == TOS_SUCCESS ? 0 : -EIO;
+	if (result == TOS_FAILURE)
+		pr_err("ACPI call to get Fan status failed\n");
+	else if (result == TOS_NOT_SUPPORTED)
+		return -ENODEV;
+
+	return result == TOS_SUCCESS ? 0 : -EIO;
+}
+
+static int set_fan_status(struct toshiba_acpi_dev *dev, u32 status)
+{
+	u32 result = hci_write(dev, HCI_FAN, status);
+
+	if (result == TOS_FAILURE)
+		pr_err("ACPI call to set Fan status failed\n");
+	else if (result == TOS_NOT_SUPPORTED)
+		return -ENODEV;
+
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static int fan_proc_show(struct seq_file *m, void *v)
 {
 	struct toshiba_acpi_dev *dev = m->private;
-	int ret;
 	u32 value;
 
-	ret = get_fan_status(dev, &value);
-	if (!ret) {
-		seq_printf(m, "running:                 %d\n", (value > 0));
-		seq_printf(m, "force_on:                %d\n", dev->force_fan);
-	}
+	if (get_fan_status(dev, &value))
+		return -EIO;
 
-	return ret;
+	seq_printf(m, "running:                 %d\n", (value > 0));
+	seq_printf(m, "force_on:                %d\n", dev->force_fan);
+
+	return 0;
 }
 
 static int fan_proc_open(struct inode *inode, struct file *file)
@@ -1583,23 +1400,20 @@ static ssize_t fan_proc_write(struct file *file, const char __user *buf,
 	char cmd[42];
 	size_t len;
 	int value;
-	u32 hci_result;
 
 	len = min(count, sizeof(cmd) - 1);
 	if (copy_from_user(cmd, buf, len))
 		return -EFAULT;
 	cmd[len] = '\0';
 
-	if (sscanf(cmd, " force_on : %i", &value) == 1 &&
-	    value >= 0 && value <= 1) {
-		hci_result = hci_write1(dev, HCI_FAN, value);
-		if (hci_result == TOS_SUCCESS)
-			dev->force_fan = value;
-		else
-			return -EIO;
-	} else {
+	if (sscanf(cmd, " force_on : %i", &value) != 1 &&
+	    value != 0 && value != 1)
 		return -EINVAL;
-	}
+
+	if (set_fan_status(dev, value))
+		return -EIO;
+
+	dev->force_fan = value;
 
 	return count;
 }
@@ -1616,32 +1430,10 @@ static const struct file_operations fan_proc_fops = {
 static int keys_proc_show(struct seq_file *m, void *v)
 {
 	struct toshiba_acpi_dev *dev = m->private;
-	u32 hci_result;
-	u32 value;
-
-	if (!dev->key_event_valid && dev->system_event_supported) {
-		hci_result = hci_read1(dev, HCI_SYSTEM_EVENT, &value);
-		if (hci_result == TOS_SUCCESS) {
-			dev->key_event_valid = 1;
-			dev->last_key_event = value;
-		} else if (hci_result == TOS_FIFO_EMPTY) {
-			/* Better luck next time */
-		} else if (hci_result == TOS_NOT_SUPPORTED) {
-			/*
-			 * This is a workaround for an unresolved issue on
-			 * some machines where system events sporadically
-			 * become disabled.
-			 */
-			hci_result = hci_write1(dev, HCI_SYSTEM_EVENT, 1);
-			pr_notice("Re-enabled hotkeys\n");
-		} else {
-			pr_err("Error reading hotkey status\n");
-			return -EIO;
-		}
-	}
 
 	seq_printf(m, "hotkey_ready:            %d\n", dev->key_event_valid);
 	seq_printf(m, "hotkey:                  0x%04x\n", dev->last_key_event);
+
 	return 0;
 }
 
@@ -1758,7 +1550,6 @@ static ssize_t fan_store(struct device *dev,
 			 const char *buf, size_t count)
 {
 	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
-	u32 result;
 	int state;
 	int ret;
 
@@ -1769,11 +1560,9 @@ static ssize_t fan_store(struct device *dev,
 	if (state != 0 && state != 1)
 		return -EINVAL;
 
-	result = hci_write1(toshiba, HCI_FAN, state);
-	if (result == TOS_FAILURE)
-		return -EIO;
-	else if (result == TOS_NOT_SUPPORTED)
-		return -ENODEV;
+	ret = set_fan_status(toshiba, state);
+	if (ret)
+		return ret;
 
 	return count;
 }
@@ -1799,7 +1588,6 @@ static ssize_t kbd_backlight_mode_store(struct device *dev,
 {
 	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
 	int mode;
-	int time;
 	int ret;
 
 
@@ -1830,7 +1618,7 @@ static ssize_t kbd_backlight_mode_store(struct device *dev,
 	/* Only make a change if the actual mode has changed */
 	if (toshiba->kbd_mode != mode) {
 		/* Shift the time to "base time" (0x3c0000 == 60 seconds) */
-		time = toshiba->kbd_time << HCI_MISC_SHIFT;
+		int time = toshiba->kbd_time << HCI_MISC_SHIFT;
 
 		/* OR the "base time" to the actual method format */
 		if (toshiba->kbd_type == 1) {
@@ -1881,10 +1669,10 @@ static ssize_t available_kbd_modes_show(struct device *dev,
 	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
 
 	if (toshiba->kbd_type == 1)
-		return sprintf(buf, "%x %x\n",
+		return sprintf(buf, "0x%x 0x%x\n",
 			       SCI_KBD_MODE_FNZ, SCI_KBD_MODE_AUTO);
 
-	return sprintf(buf, "%x %x %x\n",
+	return sprintf(buf, "0x%x 0x%x 0x%x\n",
 		       SCI_KBD_MODE_AUTO, SCI_KBD_MODE_ON, SCI_KBD_MODE_OFF);
 }
 static DEVICE_ATTR_RO(available_kbd_modes);
@@ -2379,6 +2167,81 @@ static struct attribute_group toshiba_attr_group = {
 };
 
 /*
+ * Misc device
+ */
+static int toshiba_acpi_smm_bridge(SMMRegisters *regs)
+{
+	u32 in[TCI_WORDS] = { regs->eax, regs->ebx, regs->ecx,
+			      regs->edx, regs->esi, regs->edi };
+	u32 out[TCI_WORDS];
+	acpi_status status;
+
+	status = tci_raw(toshiba_acpi, in, out);
+	if (ACPI_FAILURE(status)) {
+		pr_err("ACPI call to query SMM registers failed\n");
+		return -EIO;
+	}
+
+	/* Fillout the SMM struct with the TCI call results */
+	regs->eax = out[0];
+	regs->ebx = out[1];
+	regs->ecx = out[2];
+	regs->edx = out[3];
+	regs->esi = out[4];
+	regs->edi = out[5];
+
+	return 0;
+}
+
+static long toshiba_acpi_ioctl(struct file *fp, unsigned int cmd,
+			       unsigned long arg)
+{
+	SMMRegisters __user *argp = (SMMRegisters __user *)arg;
+	SMMRegisters regs;
+	int ret;
+
+	if (!argp)
+		return -EINVAL;
+
+	switch (cmd) {
+	case TOSH_SMM:
+		if (copy_from_user(&regs, argp, sizeof(SMMRegisters)))
+			return -EFAULT;
+		ret = toshiba_acpi_smm_bridge(&regs);
+		if (ret)
+			return ret;
+		if (copy_to_user(argp, &regs, sizeof(SMMRegisters)))
+			return -EFAULT;
+		break;
+	case TOSHIBA_ACPI_SCI:
+		if (copy_from_user(&regs, argp, sizeof(SMMRegisters)))
+			return -EFAULT;
+		/* Ensure we are being called with a SCI_{GET, SET} register */
+		if (regs.eax != SCI_GET && regs.eax != SCI_SET)
+			return -EINVAL;
+		if (!sci_open(toshiba_acpi))
+			return -EIO;
+		ret = toshiba_acpi_smm_bridge(&regs);
+		sci_close(toshiba_acpi);
+		if (ret)
+			return ret;
+		if (copy_to_user(argp, &regs, sizeof(SMMRegisters)))
+			return -EFAULT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct file_operations toshiba_acpi_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl = toshiba_acpi_ioctl,
+	.llseek		= noop_llseek,
+};
+
+/*
  * Hotkeys
  */
 static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
@@ -2391,7 +2254,16 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	result = hci_write1(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE);
+	/*
+	 * Enable the "Special Functions" mode only if they are
+	 * supported and if they are activated.
+	 */
+	if (dev->kbd_function_keys_supported && dev->special_functions)
+		result = hci_write(dev, HCI_HOTKEY_EVENT,
+				   HCI_HOTKEY_SPECIAL_FUNCTIONS);
+	else
+		result = hci_write(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE);
+
 	if (result == TOS_FAILURE)
 		return -EIO;
 	else if (result == TOS_NOT_SUPPORTED)
@@ -2400,20 +2272,6 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
 	return 0;
 }
 
-static void toshiba_acpi_enable_special_functions(struct toshiba_acpi_dev *dev)
-{
-	u32 result;
-
-	/*
-	 * Re-activate the hotkeys, but this time, we are using the
-	 * "Special Functions" mode.
-	 */
-	result = hci_write1(dev, HCI_HOTKEY_EVENT,
-			    HCI_HOTKEY_SPECIAL_FUNCTIONS);
-	if (result != TOS_SUCCESS)
-		pr_err("Could not enable the Special Function mode\n");
-}
-
 static bool toshiba_acpi_i8042_filter(unsigned char data, unsigned char str,
 				      struct serio *port)
 {
@@ -2478,22 +2336,28 @@ static void toshiba_acpi_report_hotkey(struct toshiba_acpi_dev *dev,
 
 static void toshiba_acpi_process_hotkeys(struct toshiba_acpi_dev *dev)
 {
-	u32 hci_result, value;
-	int retries = 3;
-	int scancode;
-
 	if (dev->info_supported) {
-		scancode = toshiba_acpi_query_hotkey(dev);
-		if (scancode < 0)
+		int scancode = toshiba_acpi_query_hotkey(dev);
+
+		if (scancode < 0) {
 			pr_err("Failed to query hotkey event\n");
-		else if (scancode != 0)
+		} else if (scancode != 0) {
 			toshiba_acpi_report_hotkey(dev, scancode);
+			dev->key_event_valid = 1;
+			dev->last_key_event = scancode;
+		}
 	} else if (dev->system_event_supported) {
+		u32 result;
+		u32 value;
+		int retries = 3;
+
 		do {
-			hci_result = hci_read1(dev, HCI_SYSTEM_EVENT, &value);
-			switch (hci_result) {
+			result = hci_read(dev, HCI_SYSTEM_EVENT, &value);
+			switch (result) {
 			case TOS_SUCCESS:
 				toshiba_acpi_report_hotkey(dev, (int)value);
+				dev->key_event_valid = 1;
+				dev->last_key_event = value;
 				break;
 			case TOS_NOT_SUPPORTED:
 				/*
@@ -2501,15 +2365,15 @@ static void toshiba_acpi_process_hotkeys(struct toshiba_acpi_dev *dev)
 				 * issue on some machines where system events
 				 * sporadically become disabled.
 				 */
-				hci_result =
-					hci_write1(dev, HCI_SYSTEM_EVENT, 1);
-				pr_notice("Re-enabled hotkeys\n");
+				result = hci_write(dev, HCI_SYSTEM_EVENT, 1);
+				if (result == TOS_SUCCESS)
+					pr_notice("Re-enabled hotkeys\n");
 				/* Fall through */
 			default:
 				retries--;
 				break;
 			}
-		} while (retries && hci_result != TOS_FIFO_EMPTY);
+		} while (retries && result != TOS_FIFO_EMPTY);
 	}
 }
 
@@ -2517,20 +2381,19 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
 {
 	const struct key_entry *keymap = toshiba_acpi_keymap;
 	acpi_handle ec_handle;
-	u32 events_type;
-	u32 hci_result;
 	int error;
 
+	if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID)) {
+		pr_info("WMI event detected, hotkeys will not be monitored\n");
+		return 0;
+	}
+
 	error = toshiba_acpi_enable_hotkeys(dev);
 	if (error)
 		return error;
 
-	error = toshiba_hotkey_event_type_get(dev, &events_type);
-	if (error) {
-		pr_err("Unable to query Hotkey Event Type\n");
-		return error;
-	}
-	dev->hotkey_event_type = events_type;
+	if (toshiba_hotkey_event_type_get(dev, &dev->hotkey_event_type))
+		pr_notice("Unable to query Hotkey Event Type\n");
 
 	dev->hotkey_dev = input_allocate_device();
 	if (!dev->hotkey_dev)
@@ -2540,14 +2403,15 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
 	dev->hotkey_dev->phys = "toshiba_acpi/input0";
 	dev->hotkey_dev->id.bustype = BUS_HOST;
 
-	if (events_type == HCI_SYSTEM_TYPE1 ||
+	if (dev->hotkey_event_type == HCI_SYSTEM_TYPE1 ||
 	    !dev->kbd_function_keys_supported)
 		keymap = toshiba_acpi_keymap;
-	else if (events_type == HCI_SYSTEM_TYPE2 ||
+	else if (dev->hotkey_event_type == HCI_SYSTEM_TYPE2 ||
 		 dev->kbd_function_keys_supported)
 		keymap = toshiba_acpi_alt_keymap;
 	else
-		pr_info("Unknown event type received %x\n", events_type);
+		pr_info("Unknown event type received %x\n",
+			dev->hotkey_event_type);
 	error = sparse_keymap_setup(dev->hotkey_dev, keymap, NULL);
 	if (error)
 		goto err_free_dev;
@@ -2578,11 +2442,8 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
 	 */
 	if (acpi_has_method(dev->acpi_dev->handle, "INFO"))
 		dev->info_supported = 1;
-	else {
-		hci_result = hci_write1(dev, HCI_SYSTEM_EVENT, 1);
-		if (hci_result == TOS_SUCCESS)
-			dev->system_event_supported = 1;
-	}
+	else if (hci_write(dev, HCI_SYSTEM_EVENT, 1) == TOS_SUCCESS)
+		dev->system_event_supported = 1;
 
 	if (!dev->info_supported && !dev->system_event_supported) {
 		pr_warn("No hotkey query interface found\n");
@@ -2613,7 +2474,6 @@ static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev)
 	struct backlight_properties props;
 	int brightness;
 	int ret;
-	bool enabled;
 
 	/*
 	 * Some machines don't support the backlight methods at all, and
@@ -2624,30 +2484,31 @@ static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev)
 	brightness = __get_lcd_brightness(dev);
 	if (brightness < 0)
 		return 0;
+	/*
+	 * If transflective backlight is supported and the brightness is zero
+	 * (lowest brightness level), the set_lcd_brightness function will
+	 * activate the transflective backlight, making the LCD appear to be
+	 * turned off, simply increment the brightness level to avoid that.
+	 */
+	if (dev->tr_backlight_supported && brightness == 0)
+		brightness++;
 	ret = set_lcd_brightness(dev, brightness);
 	if (ret) {
 		pr_debug("Backlight method is read-only, disabling backlight support\n");
 		return 0;
 	}
 
-	/* Determine whether or not BIOS supports transflective backlight */
-	ret = get_tr_backlight_status(dev, &enabled);
-	dev->tr_backlight_supported = !ret;
-
 	/*
 	 * Tell acpi-video-detect code to prefer vendor backlight on all
 	 * systems with transflective backlight and on dmi matched systems.
 	 */
 	if (dev->tr_backlight_supported ||
 	    dmi_check_system(toshiba_vendor_backlight_dmi))
-		acpi_video_dmi_promote_vendor();
+		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
 
-	if (acpi_video_backlight_support())
+	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
 		return 0;
 
-	/* acpi-video may have loaded before we called dmi_promote_vendor() */
-	acpi_video_unregister_backlight();
-
 	memset(&props, 0, sizeof(props));
 	props.type = BACKLIGHT_PLATFORM;
 	props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
@@ -2672,10 +2533,52 @@ static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev)
 	return 0;
 }
 
+static void print_supported_features(struct toshiba_acpi_dev *dev)
+{
+	pr_info("Supported laptop features:");
+
+	if (dev->hotkey_dev)
+		pr_cont(" hotkeys");
+	if (dev->backlight_dev)
+		pr_cont(" backlight");
+	if (dev->video_supported)
+		pr_cont(" video-out");
+	if (dev->fan_supported)
+		pr_cont(" fan");
+	if (dev->tr_backlight_supported)
+		pr_cont(" transflective-backlight");
+	if (dev->illumination_supported)
+		pr_cont(" illumination");
+	if (dev->kbd_illum_supported)
+		pr_cont(" keyboard-backlight");
+	if (dev->touchpad_supported)
+		pr_cont(" touchpad");
+	if (dev->eco_supported)
+		pr_cont(" eco-led");
+	if (dev->accelerometer_supported)
+		pr_cont(" accelerometer-axes");
+	if (dev->usb_sleep_charge_supported)
+		pr_cont(" usb-sleep-charge");
+	if (dev->usb_rapid_charge_supported)
+		pr_cont(" usb-rapid-charge");
+	if (dev->usb_sleep_music_supported)
+		pr_cont(" usb-sleep-music");
+	if (dev->kbd_function_keys_supported)
+		pr_cont(" special-function-keys");
+	if (dev->panel_power_on_supported)
+		pr_cont(" panel-power-on");
+	if (dev->usb_three_supported)
+		pr_cont(" usb3");
+
+	pr_cont("\n");
+}
+
 static int toshiba_acpi_remove(struct acpi_device *acpi_dev)
 {
 	struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev);
 
+	misc_deregister(&dev->miscdev);
+
 	remove_toshiba_proc_entries(dev);
 
 	if (dev->sysfs_created)
@@ -2692,20 +2595,15 @@ static int toshiba_acpi_remove(struct acpi_device *acpi_dev)
 		sparse_keymap_free(dev->hotkey_dev);
 	}
 
-	if (dev->bt_rfk) {
-		rfkill_unregister(dev->bt_rfk);
-		rfkill_destroy(dev->bt_rfk);
-	}
-
 	backlight_device_unregister(dev->backlight_dev);
 
-	if (dev->illumination_supported)
+	if (dev->illumination_led_registered)
 		led_classdev_unregister(&dev->led_dev);
 
 	if (dev->kbd_led_registered)
 		led_classdev_unregister(&dev->kbd_led);
 
-	if (dev->eco_supported)
+	if (dev->eco_led_registered)
 		led_classdev_unregister(&dev->eco_led);
 
 	if (toshiba_acpi)
@@ -2731,9 +2629,7 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 {
 	struct toshiba_acpi_dev *dev;
 	const char *hci_method;
-	u32 special_functions;
 	u32 dummy;
-	bool bt_present;
 	int ret = 0;
 
 	if (toshiba_acpi)
@@ -2753,6 +2649,17 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 		return -ENOMEM;
 	dev->acpi_dev = acpi_dev;
 	dev->method_hci = hci_method;
+	dev->miscdev.minor = MISC_DYNAMIC_MINOR;
+	dev->miscdev.name = "toshiba_acpi";
+	dev->miscdev.fops = &toshiba_acpi_fops;
+
+	ret = misc_register(&dev->miscdev);
+	if (ret) {
+		pr_err("Failed to register miscdevice\n");
+		kfree(dev);
+		return ret;
+	}
+
 	acpi_dev->driver_data = dev;
 	dev_set_drvdata(&acpi_dev->dev, dev);
 
@@ -2763,58 +2670,42 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	 * with the new keyboard layout, query for its presence to help
 	 * determine the keymap layout to use.
 	 */
-	ret = toshiba_function_keys_get(dev, &special_functions);
+	ret = toshiba_function_keys_get(dev, &dev->special_functions);
 	dev->kbd_function_keys_supported = !ret;
 
+	dev->hotkey_event_type = 0;
 	if (toshiba_acpi_setup_keyboard(dev))
 		pr_info("Unable to activate hotkeys\n");
 
-	mutex_init(&dev->mutex);
+	/* Determine whether or not BIOS supports transflective backlight */
+	ret = get_tr_backlight_status(dev, &dummy);
+	dev->tr_backlight_supported = !ret;
 
 	ret = toshiba_acpi_setup_backlight(dev);
 	if (ret)
 		goto error;
 
-	/* Register rfkill switch for Bluetooth */
-	if (hci_get_bt_present(dev, &bt_present) == TOS_SUCCESS && bt_present) {
-		dev->bt_rfk = rfkill_alloc("Toshiba Bluetooth",
-					   &acpi_dev->dev,
-					   RFKILL_TYPE_BLUETOOTH,
-					   &toshiba_rfk_ops,
-					   dev);
-		if (!dev->bt_rfk) {
-			pr_err("unable to allocate rfkill device\n");
-			ret = -ENOMEM;
-			goto error;
-		}
-
-		ret = rfkill_register(dev->bt_rfk);
-		if (ret) {
-			pr_err("unable to register rfkill device\n");
-			rfkill_destroy(dev->bt_rfk);
-			goto error;
-		}
-	}
-
-	if (toshiba_illumination_available(dev)) {
+	toshiba_illumination_available(dev);
+	if (dev->illumination_supported) {
 		dev->led_dev.name = "toshiba::illumination";
 		dev->led_dev.max_brightness = 1;
 		dev->led_dev.brightness_set = toshiba_illumination_set;
 		dev->led_dev.brightness_get = toshiba_illumination_get;
 		if (!led_classdev_register(&acpi_dev->dev, &dev->led_dev))
-			dev->illumination_supported = 1;
+			dev->illumination_led_registered = true;
 	}
 
-	if (toshiba_eco_mode_available(dev)) {
+	toshiba_eco_mode_available(dev);
+	if (dev->eco_supported) {
 		dev->eco_led.name = "toshiba::eco_mode";
 		dev->eco_led.max_brightness = 1;
 		dev->eco_led.brightness_set = toshiba_eco_mode_set_status;
 		dev->eco_led.brightness_get = toshiba_eco_mode_get_status;
 		if (!led_classdev_register(&dev->acpi_dev->dev, &dev->eco_led))
-			dev->eco_supported = 1;
+			dev->eco_led_registered = true;
 	}
 
-	dev->kbd_illum_supported = toshiba_kbd_illum_available(dev);
+	toshiba_kbd_illum_available(dev);
 	/*
 	 * Only register the LED if KBD illumination is supported
 	 * and the keyboard backlight operation mode is set to FN-Z
@@ -2825,14 +2716,13 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 		dev->kbd_led.brightness_set = toshiba_kbd_backlight_set;
 		dev->kbd_led.brightness_get = toshiba_kbd_backlight_get;
 		if (!led_classdev_register(&dev->acpi_dev->dev, &dev->kbd_led))
-			dev->kbd_led_registered = 1;
+			dev->kbd_led_registered = true;
 	}
 
 	ret = toshiba_touchpad_get(dev, &dummy);
 	dev->touchpad_supported = !ret;
 
-	ret = toshiba_accelerometer_supported(dev);
-	dev->accelerometer_supported = !ret;
+	toshiba_accelerometer_available(dev);
 
 	toshiba_usb_sleep_charge_available(dev);
 
@@ -2854,12 +2744,7 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	ret = get_fan_status(dev, &dummy);
 	dev->fan_supported = !ret;
 
-	/*
-	 * Enable the "Special Functions" mode only if they are
-	 * supported and if they are activated.
-	 */
-	if (dev->kbd_function_keys_supported && special_functions)
-		toshiba_acpi_enable_special_functions(dev);
+	print_supported_features(dev);
 
 	ret = sysfs_create_group(&dev->acpi_dev->dev.kobj,
 				 &toshiba_attr_group);
@@ -2887,6 +2772,14 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event)
 
 	switch (event) {
 	case 0x80: /* Hotkeys and some system events */
+		/*
+		 * Machines with this WMI GUID aren't supported due to bugs in
+		 * their AML.
+		 *
+		 * Return silently to avoid triggering a netlink event.
+		 */
+		if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID))
+			return;
 		toshiba_acpi_process_hotkeys(dev);
 		break;
 	case 0x81: /* Dock events */
@@ -2930,10 +2823,14 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event)
 static int toshiba_acpi_suspend(struct device *device)
 {
 	struct toshiba_acpi_dev *dev = acpi_driver_data(to_acpi_device(device));
-	u32 result;
 
-	if (dev->hotkey_dev)
-		result = hci_write1(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_DISABLE);
+	if (dev->hotkey_dev) {
+		u32 result;
+
+		result = hci_write(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_DISABLE);
+		if (result != TOS_SUCCESS)
+			pr_info("Unable to disable hotkeys\n");
+	}
 
 	return 0;
 }
@@ -2941,10 +2838,10 @@ static int toshiba_acpi_suspend(struct device *device)
 static int toshiba_acpi_resume(struct device *device)
 {
 	struct toshiba_acpi_dev *dev = acpi_driver_data(to_acpi_device(device));
-	int error;
 
 	if (dev->hotkey_dev) {
-		error = toshiba_acpi_enable_hotkeys(dev);
+		int error = toshiba_acpi_enable_hotkeys(dev);
+
 		if (error)
 			pr_info("Unable to re-enable hotkeys\n");
 	}
@@ -2973,14 +2870,6 @@ static int __init toshiba_acpi_init(void)
 {
 	int ret;
 
-	/*
-	 * Machines with this WMI guid aren't supported due to bugs in
-	 * their AML. This check relies on wmi initializing before
-	 * toshiba_acpi to guarantee guids have been identified.
-	 */
-	if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID))
-		return -ENODEV;
-
 	toshiba_proc_dir = proc_mkdir(PROC_TOSHIBA, acpi_root_dir);
 	if (!toshiba_proc_dir) {
 		pr_err("Unable to create proc dir " PROC_TOSHIBA "\n");
diff --git a/kernel/drivers/platform/x86/toshiba_bluetooth.c b/kernel/drivers/platform/x86/toshiba_bluetooth.c
index 249800763..c5e45089a 100644
--- a/kernel/drivers/platform/x86/toshiba_bluetooth.c
+++ b/kernel/drivers/platform/x86/toshiba_bluetooth.c
@@ -10,12 +10,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Note the Toshiba Bluetooth RFKill switch seems to be a strange
- * fish. It only provides a BT event when the switch is flipped to
- * the 'on' position. When flipping it to 'off', the USB device is
- * simply pulled away underneath us, without any BT event being
- * delivered.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -25,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/acpi.h>
+#include <linux/rfkill.h>
 
 #define BT_KILLSWITCH_MASK	0x01
 #define BT_PLUGGED_MASK		0x40
@@ -34,6 +29,15 @@ MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@gmail.com>");
 MODULE_DESCRIPTION("Toshiba Laptop ACPI Bluetooth Enable Driver");
 MODULE_LICENSE("GPL");
 
+struct toshiba_bluetooth_dev {
+	struct acpi_device *acpi_dev;
+	struct rfkill *rfk;
+
+	bool killswitch;
+	bool plugged;
+	bool powered;
+};
+
 static int toshiba_bt_rfkill_add(struct acpi_device *device);
 static int toshiba_bt_rfkill_remove(struct acpi_device *device);
 static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event);
@@ -95,41 +99,12 @@ static int toshiba_bluetooth_status(acpi_handle handle)
 		return -ENXIO;
 	}
 
-	pr_info("Bluetooth status %llu\n", status);
-
 	return status;
 }
 
 static int toshiba_bluetooth_enable(acpi_handle handle)
 {
 	acpi_status result;
-	bool killswitch;
-	bool powered;
-	bool plugged;
-	int status;
-
-	/*
-	 * Query ACPI to verify RFKill switch is set to 'on'.
-	 * If not, we return silently, no need to report it as
-	 * an error.
-	 */
-	status = toshiba_bluetooth_status(handle);
-	if (status < 0)
-		return status;
-
-	killswitch = (status & BT_KILLSWITCH_MASK) ? true : false;
-	powered = (status & BT_POWER_MASK) ? true : false;
-	plugged = (status & BT_PLUGGED_MASK) ? true : false;
-
-	if (!killswitch)
-		return 0;
-	/*
-	 * This check ensures to only enable the device if it is powered
-	 * off or detached, as some recent devices somehow pass the killswitch
-	 * test, causing a loop enabling/disabling the device, see bug 93911.
-	 */
-	if (powered || plugged)
-		return 0;
 
 	result = acpi_evaluate_object(handle, "AUSB", NULL, NULL);
 	if (ACPI_FAILURE(result)) {
@@ -165,20 +140,102 @@ static int toshiba_bluetooth_disable(acpi_handle handle)
 	return 0;
 }
 
+/* Helper function */
+static int toshiba_bluetooth_sync_status(struct toshiba_bluetooth_dev *bt_dev)
+{
+	int status;
+
+	status = toshiba_bluetooth_status(bt_dev->acpi_dev->handle);
+	if (status < 0) {
+		pr_err("Could not sync bluetooth device status\n");
+		return status;
+	}
+
+	bt_dev->killswitch = (status & BT_KILLSWITCH_MASK) ? true : false;
+	bt_dev->plugged = (status & BT_PLUGGED_MASK) ? true : false;
+	bt_dev->powered = (status & BT_POWER_MASK) ? true : false;
+
+	pr_debug("Bluetooth status %d killswitch %d plugged %d powered %d\n",
+		 status, bt_dev->killswitch, bt_dev->plugged, bt_dev->powered);
+
+	return 0;
+}
+
+/* RFKill handlers */
+static int bt_rfkill_set_block(void *data, bool blocked)
+{
+	struct toshiba_bluetooth_dev *bt_dev = data;
+	int ret;
+
+	ret = toshiba_bluetooth_sync_status(bt_dev);
+	if (ret)
+		return ret;
+
+	if (!bt_dev->killswitch)
+		return 0;
+
+	if (blocked)
+		ret = toshiba_bluetooth_disable(bt_dev->acpi_dev->handle);
+	else
+		ret = toshiba_bluetooth_enable(bt_dev->acpi_dev->handle);
+
+	return ret;
+}
+
+static void bt_rfkill_poll(struct rfkill *rfkill, void *data)
+{
+	struct toshiba_bluetooth_dev *bt_dev = data;
+
+	if (toshiba_bluetooth_sync_status(bt_dev))
+		return;
+
+	/*
+	 * Note the Toshiba Bluetooth RFKill switch seems to be a strange
+	 * fish. It only provides a BT event when the switch is flipped to
+	 * the 'on' position. When flipping it to 'off', the USB device is
+	 * simply pulled away underneath us, without any BT event being
+	 * delivered.
+	 */
+	rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
+}
+
+static const struct rfkill_ops rfk_ops = {
+	.set_block = bt_rfkill_set_block,
+	.poll = bt_rfkill_poll,
+};
+
+/* ACPI driver functions */
 static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event)
 {
-	toshiba_bluetooth_enable(device->handle);
+	struct toshiba_bluetooth_dev *bt_dev = acpi_driver_data(device);
+
+	if (toshiba_bluetooth_sync_status(bt_dev))
+		return;
+
+	rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
 }
 
 #ifdef CONFIG_PM_SLEEP
 static int toshiba_bt_resume(struct device *dev)
 {
-	return toshiba_bluetooth_enable(to_acpi_device(dev)->handle);
+	struct toshiba_bluetooth_dev *bt_dev;
+	int ret;
+
+	bt_dev = acpi_driver_data(to_acpi_device(dev));
+
+	ret = toshiba_bluetooth_sync_status(bt_dev);
+	if (ret)
+		return ret;
+
+	rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
+
+	return 0;
 }
 #endif
 
 static int toshiba_bt_rfkill_add(struct acpi_device *device)
 {
+	struct toshiba_bluetooth_dev *bt_dev;
 	int result;
 
 	result = toshiba_bluetooth_present(device->handle);
@@ -187,17 +244,54 @@ static int toshiba_bt_rfkill_add(struct acpi_device *device)
 
 	pr_info("Toshiba ACPI Bluetooth device driver\n");
 
-	/* Enable the BT device */
-	result = toshiba_bluetooth_enable(device->handle);
-	if (result)
+	bt_dev = kzalloc(sizeof(*bt_dev), GFP_KERNEL);
+	if (!bt_dev)
+		return -ENOMEM;
+	bt_dev->acpi_dev = device;
+	device->driver_data = bt_dev;
+	dev_set_drvdata(&device->dev, bt_dev);
+
+	result = toshiba_bluetooth_sync_status(bt_dev);
+	if (result) {
+		kfree(bt_dev);
 		return result;
+	}
+
+	bt_dev->rfk = rfkill_alloc("Toshiba Bluetooth",
+				   &device->dev,
+				   RFKILL_TYPE_BLUETOOTH,
+				   &rfk_ops,
+				   bt_dev);
+	if (!bt_dev->rfk) {
+		pr_err("Unable to allocate rfkill device\n");
+		kfree(bt_dev);
+		return -ENOMEM;
+	}
+
+	rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
+
+	result = rfkill_register(bt_dev->rfk);
+	if (result) {
+		pr_err("Unable to register rfkill device\n");
+		rfkill_destroy(bt_dev->rfk);
+		kfree(bt_dev);
+	}
 
 	return result;
 }
 
 static int toshiba_bt_rfkill_remove(struct acpi_device *device)
 {
+	struct toshiba_bluetooth_dev *bt_dev = acpi_driver_data(device);
+
 	/* clean up */
+	if (bt_dev->rfk) {
+		rfkill_unregister(bt_dev->rfk);
+		rfkill_destroy(bt_dev->rfk);
+	}
+
+	kfree(bt_dev);
+
 	return toshiba_bluetooth_disable(device->handle);
 }
 
diff --git a/kernel/drivers/platform/x86/toshiba_haps.c b/kernel/drivers/platform/x86/toshiba_haps.c
index 65300b6a8..7f2afc6b5 100644
--- a/kernel/drivers/platform/x86/toshiba_haps.c
+++ b/kernel/drivers/platform/x86/toshiba_haps.c
@@ -78,15 +78,20 @@ static ssize_t protection_level_store(struct device *dev,
 				      const char *buf, size_t count)
 {
 	struct toshiba_haps_dev *haps = dev_get_drvdata(dev);
-	int level, ret;
-
-	if (sscanf(buf, "%d", &level) != 1 || level < 0 || level > 3)
-		return -EINVAL;
+	int level;
+	int ret;
 
-	/* Set the sensor level.
-	 * Acceptable levels are:
+	ret = kstrtoint(buf, 0, &level);
+	if (ret)
+		return ret;
+	/*
+	 * Check for supported levels, which can be:
 	 * 0 - Disabled | 1 - Low | 2 - Medium | 3 - High
 	 */
+	if (level < 0 || level > 3)
+		return -EINVAL;
+
+	/* Set the sensor level */
 	ret = toshiba_haps_protection_level(haps->acpi_dev->handle, level);
 	if (ret != 0)
 		return ret;
@@ -95,15 +100,21 @@ static ssize_t protection_level_store(struct device *dev,
 
 	return count;
 }
+static DEVICE_ATTR_RW(protection_level);
 
 static ssize_t reset_protection_store(struct device *dev,
 				      struct device_attribute *attr,
 				      const char *buf, size_t count)
 {
 	struct toshiba_haps_dev *haps = dev_get_drvdata(dev);
-	int reset, ret;
+	int reset;
+	int ret;
 
-	if (sscanf(buf, "%d", &reset) != 1 || reset != 1)
+	ret = kstrtoint(buf, 0, &reset);
+	if (ret)
+		return ret;
+	/* The only accepted value is 1 */
+	if (reset != 1)
 		return -EINVAL;
 
 	/* Reset the protection interface */
@@ -113,10 +124,7 @@ static ssize_t reset_protection_store(struct device *dev,
 
 	return count;
 }
-
-static DEVICE_ATTR(protection_level, S_IRUGO | S_IWUSR,
-		   protection_level_show, protection_level_store);
-static DEVICE_ATTR(reset_protection, S_IWUSR, NULL, reset_protection_store);
+static DEVICE_ATTR_WO(reset_protection);
 
 static struct attribute *haps_attributes[] = {
 	&dev_attr_protection_level.attr,
diff --git a/kernel/drivers/platform/x86/wmi.c b/kernel/drivers/platform/x86/wmi.c
index aac47573f..eb391a281 100644
--- a/kernel/drivers/platform/x86/wmi.c
+++ b/kernel/drivers/platform/x86/wmi.c
@@ -194,34 +194,6 @@ static bool wmi_parse_guid(const u8 *src, u8 *dest)
 	return true;
 }
 
-/*
- * Convert a raw GUID to the ACII string representation
- */
-static int wmi_gtoa(const char *in, char *out)
-{
-	int i;
-
-	for (i = 3; i >= 0; i--)
-		out += sprintf(out, "%02X", in[i] & 0xFF);
-
-	out += sprintf(out, "-");
-	out += sprintf(out, "%02X", in[5] & 0xFF);
-	out += sprintf(out, "%02X", in[4] & 0xFF);
-	out += sprintf(out, "-");
-	out += sprintf(out, "%02X", in[7] & 0xFF);
-	out += sprintf(out, "%02X", in[6] & 0xFF);
-	out += sprintf(out, "-");
-	out += sprintf(out, "%02X", in[8] & 0xFF);
-	out += sprintf(out, "%02X", in[9] & 0xFF);
-	out += sprintf(out, "-");
-
-	for (i = 10; i <= 15; i++)
-		out += sprintf(out, "%02X", in[i] & 0xFF);
-
-	*out = '\0';
-	return 0;
-}
-
 static bool find_guid(const char *guid_string, struct wmi_block **out)
 {
 	char tmp[16], guid_input[16];
@@ -457,11 +429,7 @@ EXPORT_SYMBOL_GPL(wmi_set_block);
 
 static void wmi_dump_wdg(const struct guid_block *g)
 {
-	char guid_string[37];
-
-	wmi_gtoa(g->guid, guid_string);
-
-	pr_info("%s:\n", guid_string);
+	pr_info("%pUL:\n", g->guid);
 	pr_info("\tobject_id: %c%c\n", g->object_id[0], g->object_id[1]);
 	pr_info("\tnotify_id: %02X\n", g->notify_id);
 	pr_info("\treserved: %02X\n", g->reserved);
@@ -661,7 +629,6 @@ EXPORT_SYMBOL_GPL(wmi_has_guid);
 static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 			     char *buf)
 {
-	char guid_string[37];
 	struct wmi_block *wblock;
 
 	wblock = dev_get_drvdata(dev);
@@ -670,9 +637,7 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 		return strlen(buf);
 	}
 
-	wmi_gtoa(wblock->gblock.guid, guid_string);
-
-	return sprintf(buf, "wmi:%s\n", guid_string);
+	return sprintf(buf, "wmi:%pUL\n", wblock->gblock.guid);
 }
 static DEVICE_ATTR_RO(modalias);
 
@@ -695,7 +660,7 @@ static int wmi_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
 	if (!wblock)
 		return -ENOMEM;
 
-	wmi_gtoa(wblock->gblock.guid, guid_string);
+	sprintf(guid_string, "%pUL", wblock->gblock.guid);
 
 	strcpy(&env->buf[env->buflen - 1], "wmi:");
 	memcpy(&env->buf[env->buflen - 1 + 4], guid_string, 36);
@@ -721,12 +686,9 @@ static struct class wmi_class = {
 static int wmi_create_device(const struct guid_block *gblock,
 			     struct wmi_block *wblock, acpi_handle handle)
 {
-	char guid_string[37];
-
 	wblock->dev.class = &wmi_class;
 
-	wmi_gtoa(gblock->guid, guid_string);
-	dev_set_name(&wblock->dev, "%s", guid_string);
+	dev_set_name(&wblock->dev, "%pUL", gblock->guid);
 
 	dev_set_drvdata(&wblock->dev, wblock);
 
@@ -877,7 +839,6 @@ static void acpi_wmi_notify(struct acpi_device *device, u32 event)
 	struct guid_block *block;
 	struct wmi_block *wblock;
 	struct list_head *p;
-	char guid_string[37];
 
 	list_for_each(p, &wmi_block_list) {
 		wblock = list_entry(p, struct wmi_block, list);
@@ -888,8 +849,8 @@ static void acpi_wmi_notify(struct acpi_device *device, u32 event)
 			if (wblock->handler)
 				wblock->handler(event, wblock->handler_data);
 			if (debug_event) {
-				wmi_gtoa(wblock->gblock.guid, guid_string);
-				pr_info("DEBUG Event GUID: %s\n", guid_string);
+				pr_info("DEBUG Event GUID: %pUL\n",
+					wblock->gblock.guid);
 			}
 
 			acpi_bus_generate_netlink_event(