Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 124 insertions, 0 deletions

diff --git a/kernel/drivers/pinctrl/qcom/pinctrl-msm.h b/kernel/drivers/pinctrl/qcom/pinctrl-msm.h
new file mode 100644
index 000000000..54fdd04ce
--- /dev/null
+++ b/kernel/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2013, Sony Mobile Communications AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PINCTRL_MSM_H__
+#define __PINCTRL_MSM_H__
+
+struct pinctrl_pin_desc;
+
+/**
+ * struct msm_function - a pinmux function
+ * @name:    Name of the pinmux function.
+ * @groups:  List of pingroups for this function.
+ * @ngroups: Number of entries in @groups.
+ */
+struct msm_function {
+	const char *name;
+	const char * const *groups;
+	unsigned ngroups;
+};
+
+/**
+ * struct msm_pingroup - Qualcomm pingroup definition
+ * @name:                 Name of the pingroup.
+ * @pins:	          A list of pins assigned to this pingroup.
+ * @npins:	          Number of entries in @pins.
+ * @funcs:                A list of pinmux functions that can be selected for
+ *                        this group. The index of the selected function is used
+ *                        for programming the function selector.
+ *                        Entries should be indices into the groups list of the
+ *                        struct msm_pinctrl_soc_data.
+ * @ctl_reg:              Offset of the register holding control bits for this group.
+ * @io_reg:               Offset of the register holding input/output bits for this group.
+ * @intr_cfg_reg:         Offset of the register holding interrupt configuration bits.
+ * @intr_status_reg:      Offset of the register holding the status bits for this group.
+ * @intr_target_reg:      Offset of the register specifying routing of the interrupts
+ *                        from this group.
+ * @mux_bit:              Offset in @ctl_reg for the pinmux function selection.
+ * @pull_bit:             Offset in @ctl_reg for the bias configuration.
+ * @drv_bit:              Offset in @ctl_reg for the drive strength configuration.
+ * @oe_bit:               Offset in @ctl_reg for controlling output enable.
+ * @in_bit:               Offset in @io_reg for the input bit value.
+ * @out_bit:              Offset in @io_reg for the output bit value.
+ * @intr_enable_bit:      Offset in @intr_cfg_reg for enabling the interrupt for this group.
+ * @intr_status_bit:      Offset in @intr_status_reg for reading and acking the interrupt
+ *                        status.
+ * @intr_target_bit:      Offset in @intr_target_reg for configuring the interrupt routing.
+ * @intr_target_kpss_val: Value in @intr_target_bit for specifying that the interrupt from
+ *                        this gpio should get routed to the KPSS processor.
+ * @intr_raw_status_bit:  Offset in @intr_cfg_reg for the raw status bit.
+ * @intr_polarity_bit:    Offset in @intr_cfg_reg for specifying polarity of the interrupt.
+ * @intr_detection_bit:   Offset in @intr_cfg_reg for specifying interrupt type.
+ * @intr_detection_width: Number of bits used for specifying interrupt type,
+ *                        Should be 2 for SoCs that can detect both edges in hardware,
+ *                        otherwise 1.
+ */
+struct msm_pingroup {
+	const char *name;
+	const unsigned *pins;
+	unsigned npins;
+
+	unsigned *funcs;
+	unsigned nfuncs;
+
+	u32 ctl_reg;
+	u32 io_reg;
+	u32 intr_cfg_reg;
+	u32 intr_status_reg;
+	u32 intr_target_reg;
+
+	unsigned mux_bit:5;
+
+	unsigned pull_bit:5;
+	unsigned drv_bit:5;
+
+	unsigned oe_bit:5;
+	unsigned in_bit:5;
+	unsigned out_bit:5;
+
+	unsigned intr_enable_bit:5;
+	unsigned intr_status_bit:5;
+	unsigned intr_ack_high:1;
+
+	unsigned intr_target_bit:5;
+	unsigned intr_target_kpss_val:5;
+	unsigned intr_raw_status_bit:5;
+	unsigned intr_polarity_bit:5;
+	unsigned intr_detection_bit:5;
+	unsigned intr_detection_width:5;
+};
+
+/**
+ * struct msm_pinctrl_soc_data - Qualcomm pin controller driver configuration
+ * @pins:       An array describing all pins the pin controller affects.
+ * @npins:      The number of entries in @pins.
+ * @functions:  An array describing all mux functions the SoC supports.
+ * @nfunctions: The number of entries in @functions.
+ * @groups:     An array describing all pin groups the pin SoC supports.
+ * @ngroups:    The numbmer of entries in @groups.
+ * @ngpio:      The number of pingroups the driver should expose as GPIOs.
+ */
+struct msm_pinctrl_soc_data {
+	const struct pinctrl_pin_desc *pins;
+	unsigned npins;
+	const struct msm_function *functions;
+	unsigned nfunctions;
+	const struct msm_pingroup *groups;
+	unsigned ngroups;
+	unsigned ngpios;
+};
+
+int msm_pinctrl_probe(struct platform_device *pdev,
+		      const struct msm_pinctrl_soc_data *soc_data);
+int msm_pinctrl_remove(struct platform_device *pdev);
+
+#endif