summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/phy
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2015-10-09 08:42:44 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2015-10-09 08:52:35 +0300
commitfdb8b20906f3546ba6c2f9f0686d8a5189516ba3 (patch)
tree6bb43dc8a42d6e9403763bc749f706939dd2bc60 /kernel/drivers/phy
parentcc84a1f21026270463b580f2564f9d71912b20db (diff)
Kernel bump from 4.1.3-rt to 4.1.7-rt.
These changes brings a vanilla kernel from kernel.org, and the patch applied for rt is patch-4.1.7-rt8.patch. No further changes needed. Change-Id: Id8dd03c2ddd971e4d1d69b905f3069737053b700 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/phy')
-rw-r--r--kernel/drivers/phy/phy-berlin-usb.c4
-rw-r--r--kernel/drivers/phy/phy-twl4030-usb.c30
2 files changed, 22 insertions, 12 deletions
diff --git a/kernel/drivers/phy/phy-berlin-usb.c b/kernel/drivers/phy/phy-berlin-usb.c
index c6fc95b53..ab54f2864 100644
--- a/kernel/drivers/phy/phy-berlin-usb.c
+++ b/kernel/drivers/phy/phy-berlin-usb.c
@@ -106,8 +106,8 @@
static const u32 phy_berlin_pll_dividers[] = {
/* Berlin 2 */
CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
- /* Berlin 2CD */
- CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55),
+ /* Berlin 2CD/Q */
+ CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
};
struct phy_berlin_usb_priv {
diff --git a/kernel/drivers/phy/phy-twl4030-usb.c b/kernel/drivers/phy/phy-twl4030-usb.c
index bc42d6a89..6285f46f3 100644
--- a/kernel/drivers/phy/phy-twl4030-usb.c
+++ b/kernel/drivers/phy/phy-twl4030-usb.c
@@ -144,6 +144,16 @@
#define PMBR1 0x0D
#define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
+/*
+ * If VBUS is valid or ID is ground, then we know a
+ * cable is present and we need to be runtime-enabled
+ */
+static inline bool cable_present(enum omap_musb_vbus_id_status stat)
+{
+ return stat == OMAP_MUSB_VBUS_VALID ||
+ stat == OMAP_MUSB_ID_GROUND;
+}
+
struct twl4030_usb {
struct usb_phy phy;
struct device *dev;
@@ -536,8 +546,10 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
mutex_lock(&twl->lock);
if (status >= 0 && status != twl->linkstat) {
+ status_changed =
+ cable_present(twl->linkstat) !=
+ cable_present(status);
twl->linkstat = status;
- status_changed = true;
}
mutex_unlock(&twl->lock);
@@ -553,15 +565,11 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
* USB_LINK_VBUS state. musb_hdrc won't care until it
* starts to handle softconnect right.
*/
- if ((status == OMAP_MUSB_VBUS_VALID) ||
- (status == OMAP_MUSB_ID_GROUND)) {
- if (pm_runtime_suspended(twl->dev))
- pm_runtime_get_sync(twl->dev);
+ if (cable_present(status)) {
+ pm_runtime_get_sync(twl->dev);
} else {
- if (pm_runtime_active(twl->dev)) {
- pm_runtime_mark_last_busy(twl->dev);
- pm_runtime_put_autosuspend(twl->dev);
- }
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
}
omap_musb_mailbox(status);
}
@@ -711,7 +719,6 @@ static int twl4030_usb_probe(struct platform_device *pdev)
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
/* Our job is to use irqs and status from the power module
* to keep the transceiver disabled when nothing's connected.
@@ -767,6 +774,9 @@ static int twl4030_usb_remove(struct platform_device *pdev)
/* disable complete OTG block */
twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
+
+ if (cable_present(twl->linkstat))
+ pm_runtime_put_noidle(twl->dev);
pm_runtime_mark_last_busy(twl->dev);
pm_runtime_put(twl->dev);