From fdb8b20906f3546ba6c2f9f0686d8a5189516ba3 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Fri, 9 Oct 2015 08:42:44 +0300 Subject: Kernel bump from 4.1.3-rt to 4.1.7-rt. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These changes brings a vanilla kernel from kernel.org, and the patch applied for rt is patch-4.1.7-rt8.patch. No further changes needed. Change-Id: Id8dd03c2ddd971e4d1d69b905f3069737053b700 Signed-off-by: José Pekkarinen --- kernel/drivers/phy/phy-berlin-usb.c | 4 ++-- kernel/drivers/phy/phy-twl4030-usb.c | 30 ++++++++++++++++++++---------- 2 files changed, 22 insertions(+), 12 deletions(-) (limited to 'kernel/drivers/phy') diff --git a/kernel/drivers/phy/phy-berlin-usb.c b/kernel/drivers/phy/phy-berlin-usb.c index c6fc95b53..ab54f2864 100644 --- a/kernel/drivers/phy/phy-berlin-usb.c +++ b/kernel/drivers/phy/phy-berlin-usb.c @@ -106,8 +106,8 @@ static const u32 phy_berlin_pll_dividers[] = { /* Berlin 2 */ CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54), - /* Berlin 2CD */ - CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55), + /* Berlin 2CD/Q */ + CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54), }; struct phy_berlin_usb_priv { diff --git a/kernel/drivers/phy/phy-twl4030-usb.c b/kernel/drivers/phy/phy-twl4030-usb.c index bc42d6a89..6285f46f3 100644 --- a/kernel/drivers/phy/phy-twl4030-usb.c +++ b/kernel/drivers/phy/phy-twl4030-usb.c @@ -144,6 +144,16 @@ #define PMBR1 0x0D #define GPIO_USB_4PIN_ULPI_2430C (3 << 0) +/* + * If VBUS is valid or ID is ground, then we know a + * cable is present and we need to be runtime-enabled + */ +static inline bool cable_present(enum omap_musb_vbus_id_status stat) +{ + return stat == OMAP_MUSB_VBUS_VALID || + stat == OMAP_MUSB_ID_GROUND; +} + struct twl4030_usb { struct usb_phy phy; struct device *dev; @@ -536,8 +546,10 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) mutex_lock(&twl->lock); if (status >= 0 && status != twl->linkstat) { + status_changed = + cable_present(twl->linkstat) != + cable_present(status); twl->linkstat = status; - status_changed = true; } mutex_unlock(&twl->lock); @@ -553,15 +565,11 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) * USB_LINK_VBUS state. musb_hdrc won't care until it * starts to handle softconnect right. */ - if ((status == OMAP_MUSB_VBUS_VALID) || - (status == OMAP_MUSB_ID_GROUND)) { - if (pm_runtime_suspended(twl->dev)) - pm_runtime_get_sync(twl->dev); + if (cable_present(status)) { + pm_runtime_get_sync(twl->dev); } else { - if (pm_runtime_active(twl->dev)) { - pm_runtime_mark_last_busy(twl->dev); - pm_runtime_put_autosuspend(twl->dev); - } + pm_runtime_mark_last_busy(twl->dev); + pm_runtime_put_autosuspend(twl->dev); } omap_musb_mailbox(status); } @@ -711,7 +719,6 @@ static int twl4030_usb_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); /* Our job is to use irqs and status from the power module * to keep the transceiver disabled when nothing's connected. @@ -767,6 +774,9 @@ static int twl4030_usb_remove(struct platform_device *pdev) /* disable complete OTG block */ twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + + if (cable_present(twl->linkstat)) + pm_runtime_put_noidle(twl->dev); pm_runtime_mark_last_busy(twl->dev); pm_runtime_put(twl->dev); -- cgit 1.2.3-korg