Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 88 insertions, 0 deletions

diff --git a/kernel/drivers/net/ethernet/sun/Kconfig b/kernel/drivers/net/ethernet/sun/Kconfig
new file mode 100644
index 000000000..3074aa374
--- /dev/null
+++ b/kernel/drivers/net/ethernet/sun/Kconfig
@@ -0,0 +1,88 @@
+#
+# Sun network device configuration
+#
+
+config NET_VENDOR_SUN
+	bool "Sun devices"
+	default y
+	depends on SUN3 || SBUS || PCI || SUN_LDOMS
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say
+	  Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Sun network interfaces. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+if NET_VENDOR_SUN
+
+config HAPPYMEAL
+	tristate "Sun Happy Meal 10/100baseT support"
+	depends on (SBUS || PCI)
+	select CRC32
+	---help---
+	  This driver supports the "hme" interface present on most Ultra
+	  systems and as an option on older Sbus systems. This driver supports
+	  both PCI and Sbus devices. This driver also supports the "qfe" quad
+	  100baseT device available in both PCI and Sbus configurations.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunhme.
+
+config SUNBMAC
+	tristate "Sun BigMAC 10/100baseT support"
+	depends on SBUS
+	select CRC32
+	---help---
+	  This driver supports the "be" interface available as an Sbus option.
+	  This is Sun's older 100baseT Ethernet device.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunbmac.
+
+config SUNQE
+	tristate "Sun QuadEthernet support"
+	depends on SBUS
+	select CRC32
+	---help---
+	  This driver supports the "qe" 10baseT Ethernet device, available as
+	  an Sbus option. Note that this is not the same as Quad FastEthernet
+	  "qfe" which is supported by the Happy Meal driver instead.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunqe.
+
+config SUNGEM
+	tristate "Sun GEM support"
+	depends on PCI
+	select CRC32
+	select SUNGEM_PHY
+	---help---
+	  Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
+	  <http://docs.oracle.com/cd/E19455-01/806-3985-10/806-3985-10.pdf>.
+
+config CASSINI
+	tristate "Sun Cassini support"
+	depends on PCI
+	select CRC32
+	---help---
+	  Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
+	  <http://docs.oracle.com/cd/E19113-01/giga.ether.pci/817-4341-10/817-4341-10.pdf>.
+
+config SUNVNET
+	tristate "Sun Virtual Network support"
+	depends on SUN_LDOMS
+	---help---
+	  Support for virtual network devices under Sun Logical Domains.
+
+config NIU
+	tristate "Sun Neptune 10Gbit Ethernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This enables support for cards based upon Sun's
+	  Neptune chipset.
+
+endif # NET_VENDOR_SUN