diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/net/ethernet/broadcom/genet/bcmmii.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/net/ethernet/broadcom/genet/bcmmii.c')
-rw-r--r-- | kernel/drivers/net/ethernet/broadcom/genet/bcmmii.c | 592 |
1 files changed, 592 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/broadcom/genet/bcmmii.c b/kernel/drivers/net/ethernet/broadcom/genet/bcmmii.c new file mode 100644 index 000000000..420949cc5 --- /dev/null +++ b/kernel/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -0,0 +1,592 @@ +/* + * Broadcom GENET MDIO routines + * + * Copyright (c) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/wait.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/bitops.h> +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <linux/phy.h> +#include <linux/phy_fixed.h> +#include <linux/brcmphy.h> +#include <linux/of.h> +#include <linux/of_net.h> +#include <linux/of_mdio.h> +#include <linux/platform_data/bcmgenet.h> + +#include "bcmgenet.h" + +/* read a value from the MII */ +static int bcmgenet_mii_read(struct mii_bus *bus, int phy_id, int location) +{ + int ret; + struct net_device *dev = bus->priv; + struct bcmgenet_priv *priv = netdev_priv(dev); + u32 reg; + + bcmgenet_umac_writel(priv, (MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | + (location << MDIO_REG_SHIFT)), UMAC_MDIO_CMD); + /* Start MDIO transaction*/ + reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD); + reg |= MDIO_START_BUSY; + bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD); + wait_event_timeout(priv->wq, + !(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD) + & MDIO_START_BUSY), + HZ / 100); + ret = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD); + + if (ret & MDIO_READ_FAIL) + return -EIO; + + return ret & 0xffff; +} + +/* write a value to the MII */ +static int bcmgenet_mii_write(struct mii_bus *bus, int phy_id, + int location, u16 val) +{ + struct net_device *dev = bus->priv; + struct bcmgenet_priv *priv = netdev_priv(dev); + u32 reg; + + bcmgenet_umac_writel(priv, (MDIO_WR | (phy_id << MDIO_PMD_SHIFT) | + (location << MDIO_REG_SHIFT) | (0xffff & val)), + UMAC_MDIO_CMD); + reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD); + reg |= MDIO_START_BUSY; + bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD); + wait_event_timeout(priv->wq, + !(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD) & + MDIO_START_BUSY), + HZ / 100); + + return 0; +} + +/* setup netdev link state when PHY link status change and + * update UMAC and RGMII block when link up + */ +void bcmgenet_mii_setup(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + u32 reg, cmd_bits = 0; + bool status_changed = false; + + if (priv->old_link != phydev->link) { + status_changed = true; + priv->old_link = phydev->link; + } + + if (phydev->link) { + /* check speed/duplex/pause changes */ + if (priv->old_speed != phydev->speed) { + status_changed = true; + priv->old_speed = phydev->speed; + } + + if (priv->old_duplex != phydev->duplex) { + status_changed = true; + priv->old_duplex = phydev->duplex; + } + + if (priv->old_pause != phydev->pause) { + status_changed = true; + priv->old_pause = phydev->pause; + } + + /* done if nothing has changed */ + if (!status_changed) + return; + + /* speed */ + if (phydev->speed == SPEED_1000) + cmd_bits = UMAC_SPEED_1000; + else if (phydev->speed == SPEED_100) + cmd_bits = UMAC_SPEED_100; + else + cmd_bits = UMAC_SPEED_10; + cmd_bits <<= CMD_SPEED_SHIFT; + + /* duplex */ + if (phydev->duplex != DUPLEX_FULL) + cmd_bits |= CMD_HD_EN; + + /* pause capability */ + if (!phydev->pause) + cmd_bits |= CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE; + + /* + * Program UMAC and RGMII block based on established + * link speed, duplex, and pause. The speed set in + * umac->cmd tell RGMII block which clock to use for + * transmit -- 25MHz(100Mbps) or 125MHz(1Gbps). + * Receive clock is provided by the PHY. + */ + reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); + reg &= ~OOB_DISABLE; + reg |= RGMII_LINK; + bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); + + reg = bcmgenet_umac_readl(priv, UMAC_CMD); + reg &= ~((CMD_SPEED_MASK << CMD_SPEED_SHIFT) | + CMD_HD_EN | + CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE); + reg |= cmd_bits; + bcmgenet_umac_writel(priv, reg, UMAC_CMD); + } else { + /* done if nothing has changed */ + if (!status_changed) + return; + + /* needed for MoCA fixed PHY to reflect correct link status */ + netif_carrier_off(dev); + } + + phy_print_status(phydev); +} + +void bcmgenet_mii_reset(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + + if (priv->phydev) { + phy_init_hw(priv->phydev); + phy_start_aneg(priv->phydev); + } +} + +void bcmgenet_phy_power_set(struct net_device *dev, bool enable) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + u32 reg = 0; + + /* EXT_GPHY_CTRL is only valid for GENETv4 and onward */ + if (!GENET_IS_V4(priv)) + return; + + reg = bcmgenet_ext_readl(priv, EXT_GPHY_CTRL); + if (enable) { + reg &= ~EXT_CK25_DIS; + bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL); + mdelay(1); + + reg &= ~(EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN); + reg |= EXT_GPHY_RESET; + bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL); + mdelay(1); + + reg &= ~EXT_GPHY_RESET; + } else { + reg |= EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN | EXT_GPHY_RESET; + bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL); + mdelay(1); + reg |= EXT_CK25_DIS; + } + bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL); + udelay(60); +} + +static void bcmgenet_internal_phy_setup(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + u32 reg; + + /* Power up PHY */ + bcmgenet_phy_power_set(dev, true); + /* enable APD */ + reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); + reg |= EXT_PWR_DN_EN_LD; + bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); + bcmgenet_mii_reset(dev); +} + +static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv) +{ + u32 reg; + + /* Speed settings are set in bcmgenet_mii_setup() */ + reg = bcmgenet_sys_readl(priv, SYS_PORT_CTRL); + reg |= LED_ACT_SOURCE_MAC; + bcmgenet_sys_writel(priv, reg, SYS_PORT_CTRL); +} + +int bcmgenet_mii_config(struct net_device *dev, bool init) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + struct device *kdev = &priv->pdev->dev; + const char *phy_name = NULL; + u32 id_mode_dis = 0; + u32 port_ctrl; + u32 reg; + + priv->ext_phy = !phy_is_internal(priv->phydev) && + (priv->phy_interface != PHY_INTERFACE_MODE_MOCA); + + if (phy_is_internal(priv->phydev)) + priv->phy_interface = PHY_INTERFACE_MODE_NA; + + switch (priv->phy_interface) { + case PHY_INTERFACE_MODE_NA: + case PHY_INTERFACE_MODE_MOCA: + /* Irrespective of the actually configured PHY speed (100 or + * 1000) GENETv4 only has an internal GPHY so we will just end + * up masking the Gigabit features from what we support, not + * switching to the EPHY + */ + if (GENET_IS_V4(priv)) + port_ctrl = PORT_MODE_INT_GPHY; + else + port_ctrl = PORT_MODE_INT_EPHY; + + bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL); + + if (phy_is_internal(priv->phydev)) { + phy_name = "internal PHY"; + bcmgenet_internal_phy_setup(dev); + } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) { + phy_name = "MoCA"; + bcmgenet_moca_phy_setup(priv); + } + break; + + case PHY_INTERFACE_MODE_MII: + phy_name = "external MII"; + phydev->supported &= PHY_BASIC_FEATURES; + bcmgenet_sys_writel(priv, + PORT_MODE_EXT_EPHY, SYS_PORT_CTRL); + break; + + case PHY_INTERFACE_MODE_REVMII: + phy_name = "external RvMII"; + /* of_mdiobus_register took care of reading the 'max-speed' + * PHY property for us, effectively limiting the PHY supported + * capabilities, use that knowledge to also configure the + * Reverse MII interface correctly. + */ + if ((priv->phydev->supported & PHY_BASIC_FEATURES) == + PHY_BASIC_FEATURES) + port_ctrl = PORT_MODE_EXT_RVMII_25; + else + port_ctrl = PORT_MODE_EXT_RVMII_50; + bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL); + break; + + case PHY_INTERFACE_MODE_RGMII: + /* RGMII_NO_ID: TXC transitions at the same time as TXD + * (requires PCB or receiver-side delay) + * RGMII: Add 2ns delay on TXC (90 degree shift) + * + * ID is implicitly disabled for 100Mbps (RG)MII operation. + */ + id_mode_dis = BIT(16); + /* fall through */ + case PHY_INTERFACE_MODE_RGMII_TXID: + if (id_mode_dis) + phy_name = "external RGMII (no delay)"; + else + phy_name = "external RGMII (TX delay)"; + bcmgenet_sys_writel(priv, + PORT_MODE_EXT_GPHY, SYS_PORT_CTRL); + break; + default: + dev_err(kdev, "unknown phy mode: %d\n", priv->phy_interface); + return -EINVAL; + } + + /* This is an external PHY (xMII), so we need to enable the RGMII + * block for the interface to work + */ + if (priv->ext_phy) { + reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); + reg |= RGMII_MODE_EN | id_mode_dis; + bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); + } + + if (init) + dev_info(kdev, "configuring instance for %s\n", phy_name); + + return 0; +} + +static int bcmgenet_mii_probe(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct device_node *dn = priv->pdev->dev.of_node; + struct phy_device *phydev; + u32 phy_flags; + int ret; + + /* Communicate the integrated PHY revision */ + phy_flags = priv->gphy_rev; + + /* Initialize link state variables that bcmgenet_mii_setup() uses */ + priv->old_link = -1; + priv->old_speed = -1; + priv->old_duplex = -1; + priv->old_pause = -1; + + if (dn) { + if (priv->phydev) { + pr_info("PHY already attached\n"); + return 0; + } + + /* In the case of a fixed PHY, the DT node associated + * to the PHY is the Ethernet MAC DT node. + */ + if (!priv->phy_dn && of_phy_is_fixed_link(dn)) { + ret = of_phy_register_fixed_link(dn); + if (ret) + return ret; + + priv->phy_dn = of_node_get(dn); + } + + phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, + phy_flags, priv->phy_interface); + if (!phydev) { + pr_err("could not attach to PHY\n"); + return -ENODEV; + } + } else { + phydev = priv->phydev; + phydev->dev_flags = phy_flags; + + ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup, + priv->phy_interface); + if (ret) { + pr_err("could not attach to PHY\n"); + return -ENODEV; + } + } + + priv->phydev = phydev; + + /* Configure port multiplexer based on what the probed PHY device since + * reading the 'max-speed' property determines the maximum supported + * PHY speed which is needed for bcmgenet_mii_config() to configure + * things appropriately. + */ + ret = bcmgenet_mii_config(dev, true); + if (ret) { + phy_disconnect(priv->phydev); + return ret; + } + + phydev->advertising = phydev->supported; + + /* The internal PHY has its link interrupts routed to the + * Ethernet MAC ISRs + */ + if (phy_is_internal(priv->phydev)) + priv->mii_bus->irq[phydev->addr] = PHY_IGNORE_INTERRUPT; + else + priv->mii_bus->irq[phydev->addr] = PHY_POLL; + + pr_info("attached PHY at address %d [%s]\n", + phydev->addr, phydev->drv->name); + + return 0; +} + +static int bcmgenet_mii_alloc(struct bcmgenet_priv *priv) +{ + struct mii_bus *bus; + + if (priv->mii_bus) + return 0; + + priv->mii_bus = mdiobus_alloc(); + if (!priv->mii_bus) { + pr_err("failed to allocate\n"); + return -ENOMEM; + } + + bus = priv->mii_bus; + bus->priv = priv->dev; + bus->name = "bcmgenet MII bus"; + bus->parent = &priv->pdev->dev; + bus->read = bcmgenet_mii_read; + bus->write = bcmgenet_mii_write; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", + priv->pdev->name, priv->pdev->id); + + bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); + if (!bus->irq) { + mdiobus_free(priv->mii_bus); + return -ENOMEM; + } + + return 0; +} + +static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv) +{ + struct device_node *dn = priv->pdev->dev.of_node; + struct device *kdev = &priv->pdev->dev; + struct device_node *mdio_dn; + char *compat; + int ret; + + compat = kasprintf(GFP_KERNEL, "brcm,genet-mdio-v%d", priv->version); + if (!compat) + return -ENOMEM; + + mdio_dn = of_find_compatible_node(dn, NULL, compat); + kfree(compat); + if (!mdio_dn) { + dev_err(kdev, "unable to find MDIO bus node\n"); + return -ENODEV; + } + + ret = of_mdiobus_register(priv->mii_bus, mdio_dn); + if (ret) { + dev_err(kdev, "failed to register MDIO bus\n"); + return ret; + } + + /* Fetch the PHY phandle */ + priv->phy_dn = of_parse_phandle(dn, "phy-handle", 0); + + /* Get the link mode */ + priv->phy_interface = of_get_phy_mode(dn); + + return 0; +} + +static int bcmgenet_fixed_phy_link_update(struct net_device *dev, + struct fixed_phy_status *status) +{ + if (dev && dev->phydev && status) + status->link = dev->phydev->link; + + return 0; +} + +static int bcmgenet_mii_pd_init(struct bcmgenet_priv *priv) +{ + struct device *kdev = &priv->pdev->dev; + struct bcmgenet_platform_data *pd = kdev->platform_data; + struct mii_bus *mdio = priv->mii_bus; + struct phy_device *phydev; + int ret; + + if (pd->phy_interface != PHY_INTERFACE_MODE_MOCA && pd->mdio_enabled) { + /* + * Internal or external PHY with MDIO access + */ + if (pd->phy_address >= 0 && pd->phy_address < PHY_MAX_ADDR) + mdio->phy_mask = ~(1 << pd->phy_address); + else + mdio->phy_mask = 0; + + ret = mdiobus_register(mdio); + if (ret) { + dev_err(kdev, "failed to register MDIO bus\n"); + return ret; + } + + if (pd->phy_address >= 0 && pd->phy_address < PHY_MAX_ADDR) + phydev = mdio->phy_map[pd->phy_address]; + else + phydev = phy_find_first(mdio); + + if (!phydev) { + dev_err(kdev, "failed to register PHY device\n"); + mdiobus_unregister(mdio); + return -ENODEV; + } + } else { + /* + * MoCA port or no MDIO access. + * Use fixed PHY to represent the link layer. + */ + struct fixed_phy_status fphy_status = { + .link = 1, + .speed = pd->phy_speed, + .duplex = pd->phy_duplex, + .pause = 0, + .asym_pause = 0, + }; + + phydev = fixed_phy_register(PHY_POLL, &fphy_status, NULL); + if (!phydev || IS_ERR(phydev)) { + dev_err(kdev, "failed to register fixed PHY device\n"); + return -ENODEV; + } + + if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET) { + ret = fixed_phy_set_link_update( + phydev, bcmgenet_fixed_phy_link_update); + if (!ret) + phydev->link = 0; + } + } + + priv->phydev = phydev; + priv->phy_interface = pd->phy_interface; + + return 0; +} + +static int bcmgenet_mii_bus_init(struct bcmgenet_priv *priv) +{ + struct device_node *dn = priv->pdev->dev.of_node; + + if (dn) + return bcmgenet_mii_of_init(priv); + else + return bcmgenet_mii_pd_init(priv); +} + +int bcmgenet_mii_init(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + int ret; + + ret = bcmgenet_mii_alloc(priv); + if (ret) + return ret; + + ret = bcmgenet_mii_bus_init(priv); + if (ret) + goto out_free; + + ret = bcmgenet_mii_probe(dev); + if (ret) + goto out; + + return 0; + +out: + of_node_put(priv->phy_dn); + mdiobus_unregister(priv->mii_bus); +out_free: + kfree(priv->mii_bus->irq); + mdiobus_free(priv->mii_bus); + return ret; +} + +void bcmgenet_mii_exit(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + + of_node_put(priv->phy_dn); + mdiobus_unregister(priv->mii_bus); + kfree(priv->mii_bus->irq); + mdiobus_free(priv->mii_bus); +} |