Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 2585 insertions, 0 deletions

diff --git a/kernel/drivers/mmc/host/atmel-mci.c b/kernel/drivers/mmc/host/atmel-mci.c
new file mode 100644
index 000000000..9a39e0b7e
--- /dev/null
+++ b/kernel/drivers/mmc/host/atmel-mci.c
@@ -0,0 +1,2585 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
+ * Copyright (C) 2004-2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/blkdev.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/types.h>
+#include <linux/platform_data/atmel.h>
+#include <linux/platform_data/mmc-atmel-mci.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio.h>
+
+#include <linux/atmel-mci.h>
+#include <linux/atmel_pdc.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/unaligned.h>
+
+#include "atmel-mci-regs.h"
+
+#define AUTOSUSPEND_DELAY	50
+
+#define ATMCI_DATA_ERROR_FLAGS	(ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
+#define ATMCI_DMA_THRESHOLD	16
+
+enum {
+	EVENT_CMD_RDY = 0,
+	EVENT_XFER_COMPLETE,
+	EVENT_NOTBUSY,
+	EVENT_DATA_ERROR,
+};
+
+enum atmel_mci_state {
+	STATE_IDLE = 0,
+	STATE_SENDING_CMD,
+	STATE_DATA_XFER,
+	STATE_WAITING_NOTBUSY,
+	STATE_SENDING_STOP,
+	STATE_END_REQUEST,
+};
+
+enum atmci_xfer_dir {
+	XFER_RECEIVE = 0,
+	XFER_TRANSMIT,
+};
+
+enum atmci_pdc_buf {
+	PDC_FIRST_BUF = 0,
+	PDC_SECOND_BUF,
+};
+
+struct atmel_mci_caps {
+	bool    has_dma_conf_reg;
+	bool    has_pdc;
+	bool    has_cfg_reg;
+	bool    has_cstor_reg;
+	bool    has_highspeed;
+	bool    has_rwproof;
+	bool	has_odd_clk_div;
+	bool	has_bad_data_ordering;
+	bool	need_reset_after_xfer;
+	bool	need_blksz_mul_4;
+	bool	need_notbusy_for_read_ops;
+};
+
+struct atmel_mci_dma {
+	struct dma_chan			*chan;
+	struct dma_async_tx_descriptor	*data_desc;
+};
+
+/**
+ * struct atmel_mci - MMC controller state shared between all slots
+ * @lock: Spinlock protecting the queue and associated data.
+ * @regs: Pointer to MMIO registers.
+ * @sg: Scatterlist entry currently being processed by PIO or PDC code.
+ * @pio_offset: Offset into the current scatterlist entry.
+ * @buffer: Buffer used if we don't have the r/w proof capability. We
+ *      don't have the time to switch pdc buffers so we have to use only
+ *      one buffer for the full transaction.
+ * @buf_size: size of the buffer.
+ * @phys_buf_addr: buffer address needed for pdc.
+ * @cur_slot: The slot which is currently using the controller.
+ * @mrq: The request currently being processed on @cur_slot,
+ *	or NULL if the controller is idle.
+ * @cmd: The command currently being sent to the card, or NULL.
+ * @data: The data currently being transferred, or NULL if no data
+ *	transfer is in progress.
+ * @data_size: just data->blocks * data->blksz.
+ * @dma: DMA client state.
+ * @data_chan: DMA channel being used for the current data transfer.
+ * @cmd_status: Snapshot of SR taken upon completion of the current
+ *	command. Only valid when EVENT_CMD_COMPLETE is pending.
+ * @data_status: Snapshot of SR taken upon completion of the current
+ *	data transfer. Only valid when EVENT_DATA_COMPLETE or
+ *	EVENT_DATA_ERROR is pending.
+ * @stop_cmdr: Value to be loaded into CMDR when the stop command is
+ *	to be sent.
+ * @tasklet: Tasklet running the request state machine.
+ * @pending_events: Bitmask of events flagged by the interrupt handler
+ *	to be processed by the tasklet.
+ * @completed_events: Bitmask of events which the state machine has
+ *	processed.
+ * @state: Tasklet state.
+ * @queue: List of slots waiting for access to the controller.
+ * @need_clock_update: Update the clock rate before the next request.
+ * @need_reset: Reset controller before next request.
+ * @timer: Timer to balance the data timeout error flag which cannot rise.
+ * @mode_reg: Value of the MR register.
+ * @cfg_reg: Value of the CFG register.
+ * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
+ *	rate and timeout calculations.
+ * @mapbase: Physical address of the MMIO registers.
+ * @mck: The peripheral bus clock hooked up to the MMC controller.
+ * @pdev: Platform device associated with the MMC controller.
+ * @slot: Slots sharing this MMC controller.
+ * @caps: MCI capabilities depending on MCI version.
+ * @prepare_data: function to setup MCI before data transfer which
+ * depends on MCI capabilities.
+ * @submit_data: function to start data transfer which depends on MCI
+ * capabilities.
+ * @stop_transfer: function to stop data transfer which depends on MCI
+ * capabilities.
+ *
+ * Locking
+ * =======
+ *
+ * @lock is a softirq-safe spinlock protecting @queue as well as
+ * @cur_slot, @mrq and @state. These must always be updated
+ * at the same time while holding @lock.
+ *
+ * @lock also protects mode_reg and need_clock_update since these are
+ * used to synchronize mode register updates with the queue
+ * processing.
+ *
+ * The @mrq field of struct atmel_mci_slot is also protected by @lock,
+ * and must always be written at the same time as the slot is added to
+ * @queue.
+ *
+ * @pending_events and @completed_events are accessed using atomic bit
+ * operations, so they don't need any locking.
+ *
+ * None of the fields touched by the interrupt handler need any
+ * locking. However, ordering is important: Before EVENT_DATA_ERROR or
+ * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
+ * interrupts must be disabled and @data_status updated with a
+ * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
+ * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
+ * bytes_xfered field of @data must be written. This is ensured by
+ * using barriers.
+ */
+struct atmel_mci {
+	spinlock_t		lock;
+	void __iomem		*regs;
+
+	struct scatterlist	*sg;
+	unsigned int		sg_len;
+	unsigned int		pio_offset;
+	unsigned int		*buffer;
+	unsigned int		buf_size;
+	dma_addr_t		buf_phys_addr;
+
+	struct atmel_mci_slot	*cur_slot;
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	unsigned int		data_size;
+
+	struct atmel_mci_dma	dma;
+	struct dma_chan		*data_chan;
+	struct dma_slave_config	dma_conf;
+
+	u32			cmd_status;
+	u32			data_status;
+	u32			stop_cmdr;
+
+	struct tasklet_struct	tasklet;
+	unsigned long		pending_events;
+	unsigned long		completed_events;
+	enum atmel_mci_state	state;
+	struct list_head	queue;
+
+	bool			need_clock_update;
+	bool			need_reset;
+	struct timer_list	timer;
+	u32			mode_reg;
+	u32			cfg_reg;
+	unsigned long		bus_hz;
+	unsigned long		mapbase;
+	struct clk		*mck;
+	struct platform_device	*pdev;
+
+	struct atmel_mci_slot	*slot[ATMCI_MAX_NR_SLOTS];
+
+	struct atmel_mci_caps   caps;
+
+	u32 (*prepare_data)(struct atmel_mci *host, struct mmc_data *data);
+	void (*submit_data)(struct atmel_mci *host, struct mmc_data *data);
+	void (*stop_transfer)(struct atmel_mci *host);
+};
+
+/**
+ * struct atmel_mci_slot - MMC slot state
+ * @mmc: The mmc_host representing this slot.
+ * @host: The MMC controller this slot is using.
+ * @sdc_reg: Value of SDCR to be written before using this slot.
+ * @sdio_irq: SDIO irq mask for this slot.
+ * @mrq: mmc_request currently being processed or waiting to be
+ *	processed, or NULL when the slot is idle.
+ * @queue_node: List node for placing this node in the @queue list of
+ *	&struct atmel_mci.
+ * @clock: Clock rate configured by set_ios(). Protected by host->lock.
+ * @flags: Random state bits associated with the slot.
+ * @detect_pin: GPIO pin used for card detection, or negative if not
+ *	available.
+ * @wp_pin: GPIO pin used for card write protect sending, or negative
+ *	if not available.
+ * @detect_is_active_high: The state of the detect pin when it is active.
+ * @detect_timer: Timer used for debouncing @detect_pin interrupts.
+ */
+struct atmel_mci_slot {
+	struct mmc_host		*mmc;
+	struct atmel_mci	*host;
+
+	u32			sdc_reg;
+	u32			sdio_irq;
+
+	struct mmc_request	*mrq;
+	struct list_head	queue_node;
+
+	unsigned int		clock;
+	unsigned long		flags;
+#define ATMCI_CARD_PRESENT	0
+#define ATMCI_CARD_NEED_INIT	1
+#define ATMCI_SHUTDOWN		2
+
+	int			detect_pin;
+	int			wp_pin;
+	bool			detect_is_active_high;
+
+	struct timer_list	detect_timer;
+};
+
+#define atmci_test_and_clear_pending(host, event)		\
+	test_and_clear_bit(event, &host->pending_events)
+#define atmci_set_completed(host, event)			\
+	set_bit(event, &host->completed_events)
+#define atmci_set_pending(host, event)				\
+	set_bit(event, &host->pending_events)
+
+/*
+ * The debugfs stuff below is mostly optimized away when
+ * CONFIG_DEBUG_FS is not set.
+ */
+static int atmci_req_show(struct seq_file *s, void *v)
+{
+	struct atmel_mci_slot	*slot = s->private;
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_command	*stop;
+	struct mmc_data		*data;
+
+	/* Make sure we get a consistent snapshot */
+	spin_lock_bh(&slot->host->lock);
+	mrq = slot->mrq;
+
+	if (mrq) {
+		cmd = mrq->cmd;
+		data = mrq->data;
+		stop = mrq->stop;
+
+		if (cmd)
+			seq_printf(s,
+				"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
+				cmd->opcode, cmd->arg, cmd->flags,
+				cmd->resp[0], cmd->resp[1], cmd->resp[2],
+				cmd->resp[3], cmd->error);
+		if (data)
+			seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
+				data->bytes_xfered, data->blocks,
+				data->blksz, data->flags, data->error);
+		if (stop)
+			seq_printf(s,
+				"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
+				stop->opcode, stop->arg, stop->flags,
+				stop->resp[0], stop->resp[1], stop->resp[2],
+				stop->resp[3], stop->error);
+	}
+
+	spin_unlock_bh(&slot->host->lock);
+
+	return 0;
+}
+
+static int atmci_req_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, atmci_req_show, inode->i_private);
+}
+
+static const struct file_operations atmci_req_fops = {
+	.owner		= THIS_MODULE,
+	.open		= atmci_req_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void atmci_show_status_reg(struct seq_file *s,
+		const char *regname, u32 value)
+{
+	static const char	*sr_bit[] = {
+		[0]	= "CMDRDY",
+		[1]	= "RXRDY",
+		[2]	= "TXRDY",
+		[3]	= "BLKE",
+		[4]	= "DTIP",
+		[5]	= "NOTBUSY",
+		[6]	= "ENDRX",
+		[7]	= "ENDTX",
+		[8]	= "SDIOIRQA",
+		[9]	= "SDIOIRQB",
+		[12]	= "SDIOWAIT",
+		[14]	= "RXBUFF",
+		[15]	= "TXBUFE",
+		[16]	= "RINDE",
+		[17]	= "RDIRE",
+		[18]	= "RCRCE",
+		[19]	= "RENDE",
+		[20]	= "RTOE",
+		[21]	= "DCRCE",
+		[22]	= "DTOE",
+		[23]	= "CSTOE",
+		[24]	= "BLKOVRE",
+		[25]	= "DMADONE",
+		[26]	= "FIFOEMPTY",
+		[27]	= "XFRDONE",
+		[30]	= "OVRE",
+		[31]	= "UNRE",
+	};
+	unsigned int		i;
+
+	seq_printf(s, "%s:\t0x%08x", regname, value);
+	for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
+		if (value & (1 << i)) {
+			if (sr_bit[i])
+				seq_printf(s, " %s", sr_bit[i]);
+			else
+				seq_puts(s, " UNKNOWN");
+		}
+	}
+	seq_putc(s, '\n');
+}
+
+static int atmci_regs_show(struct seq_file *s, void *v)
+{
+	struct atmel_mci	*host = s->private;
+	u32			*buf;
+	int			ret = 0;
+
+
+	buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	pm_runtime_get_sync(&host->pdev->dev);
+
+	/*
+	 * Grab a more or less consistent snapshot. Note that we're
+	 * not disabling interrupts, so IMR and SR may not be
+	 * consistent.
+	 */
+	spin_lock_bh(&host->lock);
+	memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
+	spin_unlock_bh(&host->lock);
+
+	pm_runtime_mark_last_busy(&host->pdev->dev);
+	pm_runtime_put_autosuspend(&host->pdev->dev);
+
+	seq_printf(s, "MR:\t0x%08x%s%s ",
+			buf[ATMCI_MR / 4],
+			buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "",
+			buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "");
+	if (host->caps.has_odd_clk_div)
+		seq_printf(s, "{CLKDIV,CLKODD}=%u\n",
+				((buf[ATMCI_MR / 4] & 0xff) << 1)
+				| ((buf[ATMCI_MR / 4] >> 16) & 1));
+	else
+		seq_printf(s, "CLKDIV=%u\n",
+				(buf[ATMCI_MR / 4] & 0xff));
+	seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]);
+	seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]);
+	seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]);
+	seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
+			buf[ATMCI_BLKR / 4],
+			buf[ATMCI_BLKR / 4] & 0xffff,
+			(buf[ATMCI_BLKR / 4] >> 16) & 0xffff);
+	if (host->caps.has_cstor_reg)
+		seq_printf(s, "CSTOR:\t0x%08x\n", buf[ATMCI_CSTOR / 4]);
+
+	/* Don't read RSPR and RDR; it will consume the data there */
+
+	atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]);
+	atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]);
+
+	if (host->caps.has_dma_conf_reg) {
+		u32 val;
+
+		val = buf[ATMCI_DMA / 4];
+		seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n",
+				val, val & 3,
+				((val >> 4) & 3) ?
+					1 << (((val >> 4) & 3) + 1) : 1,
+				val & ATMCI_DMAEN ? " DMAEN" : "");
+	}
+	if (host->caps.has_cfg_reg) {
+		u32 val;
+
+		val = buf[ATMCI_CFG / 4];
+		seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n",
+				val,
+				val & ATMCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "",
+				val & ATMCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "",
+				val & ATMCI_CFG_HSMODE ? " HSMODE" : "",
+				val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
+	}
+
+	kfree(buf);
+
+	return ret;
+}
+
+static int atmci_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, atmci_regs_show, inode->i_private);
+}
+
+static const struct file_operations atmci_regs_fops = {
+	.owner		= THIS_MODULE,
+	.open		= atmci_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void atmci_init_debugfs(struct atmel_mci_slot *slot)
+{
+	struct mmc_host		*mmc = slot->mmc;
+	struct atmel_mci	*host = slot->host;
+	struct dentry		*root;
+	struct dentry		*node;
+
+	root = mmc->debugfs_root;
+	if (!root)
+		return;
+
+	node = debugfs_create_file("regs", S_IRUSR, root, host,
+			&atmci_regs_fops);
+	if (IS_ERR(node))
+		return;
+	if (!node)
+		goto err;
+
+	node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops);
+	if (!node)
+		goto err;
+
+	node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
+	if (!node)
+		goto err;
+
+	node = debugfs_create_x32("pending_events", S_IRUSR, root,
+				     (u32 *)&host->pending_events);
+	if (!node)
+		goto err;
+
+	node = debugfs_create_x32("completed_events", S_IRUSR, root,
+				     (u32 *)&host->completed_events);
+	if (!node)
+		goto err;
+
+	return;
+
+err:
+	dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id atmci_dt_ids[] = {
+	{ .compatible = "atmel,hsmci" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmci_dt_ids);
+
+static struct mci_platform_data*
+atmci_of_init(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *cnp;
+	struct mci_platform_data *pdata;
+	u32 slot_id;
+
+	if (!np) {
+		dev_err(&pdev->dev, "device node not found\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "could not allocate memory for pdata\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	for_each_child_of_node(np, cnp) {
+		if (of_property_read_u32(cnp, "reg", &slot_id)) {
+			dev_warn(&pdev->dev, "reg property is missing for %s\n",
+				 cnp->full_name);
+			continue;
+		}
+
+		if (slot_id >= ATMCI_MAX_NR_SLOTS) {
+			dev_warn(&pdev->dev, "can't have more than %d slots\n",
+			         ATMCI_MAX_NR_SLOTS);
+			break;
+		}
+
+		if (of_property_read_u32(cnp, "bus-width",
+		                         &pdata->slot[slot_id].bus_width))
+			pdata->slot[slot_id].bus_width = 1;
+
+		pdata->slot[slot_id].detect_pin =
+			of_get_named_gpio(cnp, "cd-gpios", 0);
+
+		pdata->slot[slot_id].detect_is_active_high =
+			of_property_read_bool(cnp, "cd-inverted");
+
+		pdata->slot[slot_id].non_removable =
+			of_property_read_bool(cnp, "non-removable");
+
+		pdata->slot[slot_id].wp_pin =
+			of_get_named_gpio(cnp, "wp-gpios", 0);
+	}
+
+	return pdata;
+}
+#else /* CONFIG_OF */
+static inline struct mci_platform_data*
+atmci_of_init(struct platform_device *dev)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
+static inline unsigned int atmci_get_version(struct atmel_mci *host)
+{
+	return atmci_readl(host, ATMCI_VERSION) & 0x00000fff;
+}
+
+static void atmci_timeout_timer(unsigned long data)
+{
+	struct atmel_mci *host;
+
+	host = (struct atmel_mci *)data;
+
+	dev_dbg(&host->pdev->dev, "software timeout\n");
+
+	if (host->mrq->cmd->data) {
+		host->mrq->cmd->data->error = -ETIMEDOUT;
+		host->data = NULL;
+		/*
+		 * With some SDIO modules, sometimes DMA transfer hangs. If
+		 * stop_transfer() is not called then the DMA request is not
+		 * removed, following ones are queued and never computed.
+		 */
+		if (host->state == STATE_DATA_XFER)
+			host->stop_transfer(host);
+	} else {
+		host->mrq->cmd->error = -ETIMEDOUT;
+		host->cmd = NULL;
+	}
+	host->need_reset = 1;
+	host->state = STATE_END_REQUEST;
+	smp_wmb();
+	tasklet_schedule(&host->tasklet);
+}
+
+static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host,
+					unsigned int ns)
+{
+	/*
+	 * It is easier here to use us instead of ns for the timeout,
+	 * it prevents from overflows during calculation.
+	 */
+	unsigned int us = DIV_ROUND_UP(ns, 1000);
+
+	/* Maximum clock frequency is host->bus_hz/2 */
+	return us * (DIV_ROUND_UP(host->bus_hz, 2000000));
+}
+
+static void atmci_set_timeout(struct atmel_mci *host,
+		struct atmel_mci_slot *slot, struct mmc_data *data)
+{
+	static unsigned	dtomul_to_shift[] = {
+		0, 4, 7, 8, 10, 12, 16, 20
+	};
+	unsigned	timeout;
+	unsigned	dtocyc;
+	unsigned	dtomul;
+
+	timeout = atmci_ns_to_clocks(host, data->timeout_ns)
+		+ data->timeout_clks;
+
+	for (dtomul = 0; dtomul < 8; dtomul++) {
+		unsigned shift = dtomul_to_shift[dtomul];
+		dtocyc = (timeout + (1 << shift) - 1) >> shift;
+		if (dtocyc < 15)
+			break;
+	}
+
+	if (dtomul >= 8) {
+		dtomul = 7;
+		dtocyc = 15;
+	}
+
+	dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n",
+			dtocyc << dtomul_to_shift[dtomul]);
+	atmci_writel(host, ATMCI_DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc)));
+}
+
+/*
+ * Return mask with command flags to be enabled for this command.
+ */
+static u32 atmci_prepare_command(struct mmc_host *mmc,
+				 struct mmc_command *cmd)
+{
+	struct mmc_data	*data;
+	u32		cmdr;
+
+	cmd->error = -EINPROGRESS;
+
+	cmdr = ATMCI_CMDR_CMDNB(cmd->opcode);
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136)
+			cmdr |= ATMCI_CMDR_RSPTYP_136BIT;
+		else
+			cmdr |= ATMCI_CMDR_RSPTYP_48BIT;
+	}
+
+	/*
+	 * This should really be MAXLAT_5 for CMD2 and ACMD41, but
+	 * it's too difficult to determine whether this is an ACMD or
+	 * not. Better make it 64.
+	 */
+	cmdr |= ATMCI_CMDR_MAXLAT_64CYC;
+
+	if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
+		cmdr |= ATMCI_CMDR_OPDCMD;
+
+	data = cmd->data;
+	if (data) {
+		cmdr |= ATMCI_CMDR_START_XFER;
+
+		if (cmd->opcode == SD_IO_RW_EXTENDED) {
+			cmdr |= ATMCI_CMDR_SDIO_BLOCK;
+		} else {
+			if (data->flags & MMC_DATA_STREAM)
+				cmdr |= ATMCI_CMDR_STREAM;
+			else if (data->blocks > 1)
+				cmdr |= ATMCI_CMDR_MULTI_BLOCK;
+			else
+				cmdr |= ATMCI_CMDR_BLOCK;
+		}
+
+		if (data->flags & MMC_DATA_READ)
+			cmdr |= ATMCI_CMDR_TRDIR_READ;
+	}
+
+	return cmdr;
+}
+
+static void atmci_send_command(struct atmel_mci *host,
+		struct mmc_command *cmd, u32 cmd_flags)
+{
+	WARN_ON(host->cmd);
+	host->cmd = cmd;
+
+	dev_vdbg(&host->pdev->dev,
+			"start command: ARGR=0x%08x CMDR=0x%08x\n",
+			cmd->arg, cmd_flags);
+
+	atmci_writel(host, ATMCI_ARGR, cmd->arg);
+	atmci_writel(host, ATMCI_CMDR, cmd_flags);
+}
+
+static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
+{
+	dev_dbg(&host->pdev->dev, "send stop command\n");
+	atmci_send_command(host, data->stop, host->stop_cmdr);
+	atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
+}
+
+/*
+ * Configure given PDC buffer taking care of alignement issues.
+ * Update host->data_size and host->sg.
+ */
+static void atmci_pdc_set_single_buf(struct atmel_mci *host,
+	enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb)
+{
+	u32 pointer_reg, counter_reg;
+	unsigned int buf_size;
+
+	if (dir == XFER_RECEIVE) {
+		pointer_reg = ATMEL_PDC_RPR;
+		counter_reg = ATMEL_PDC_RCR;
+	} else {
+		pointer_reg = ATMEL_PDC_TPR;
+		counter_reg = ATMEL_PDC_TCR;
+	}
+
+	if (buf_nb == PDC_SECOND_BUF) {
+		pointer_reg += ATMEL_PDC_SCND_BUF_OFF;
+		counter_reg += ATMEL_PDC_SCND_BUF_OFF;
+	}
+
+	if (!host->caps.has_rwproof) {
+		buf_size = host->buf_size;
+		atmci_writel(host, pointer_reg, host->buf_phys_addr);
+	} else {
+		buf_size = sg_dma_len(host->sg);
+		atmci_writel(host, pointer_reg, sg_dma_address(host->sg));
+	}
+
+	if (host->data_size <= buf_size) {
+		if (host->data_size & 0x3) {
+			/* If size is different from modulo 4, transfer bytes */
+			atmci_writel(host, counter_reg, host->data_size);
+			atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCFBYTE);
+		} else {
+			/* Else transfer 32-bits words */
+			atmci_writel(host, counter_reg, host->data_size / 4);
+		}
+		host->data_size = 0;
+	} else {
+		/* We assume the size of a page is 32-bits aligned */
+		atmci_writel(host, counter_reg, sg_dma_len(host->sg) / 4);
+		host->data_size -= sg_dma_len(host->sg);
+		if (host->data_size)
+			host->sg = sg_next(host->sg);
+	}
+}
+
+/*
+ * Configure PDC buffer according to the data size ie configuring one or two
+ * buffers. Don't use this function if you want to configure only the second
+ * buffer. In this case, use atmci_pdc_set_single_buf.
+ */
+static void atmci_pdc_set_both_buf(struct atmel_mci *host, int dir)
+{
+	atmci_pdc_set_single_buf(host, dir, PDC_FIRST_BUF);
+	if (host->data_size)
+		atmci_pdc_set_single_buf(host, dir, PDC_SECOND_BUF);
+}
+
+/*
+ * Unmap sg lists, called when transfer is finished.
+ */
+static void atmci_pdc_cleanup(struct atmel_mci *host)
+{
+	struct mmc_data         *data = host->data;
+
+	if (data)
+		dma_unmap_sg(&host->pdev->dev,
+				data->sg, data->sg_len,
+				((data->flags & MMC_DATA_WRITE)
+				 ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
+}
+
+/*
+ * Disable PDC transfers. Update pending flags to EVENT_XFER_COMPLETE after
+ * having received ATMCI_TXBUFE or ATMCI_RXBUFF interrupt. Enable ATMCI_NOTBUSY
+ * interrupt needed for both transfer directions.
+ */
+static void atmci_pdc_complete(struct atmel_mci *host)
+{
+	int transfer_size = host->data->blocks * host->data->blksz;
+	int i;
+
+	atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
+
+	if ((!host->caps.has_rwproof)
+	    && (host->data->flags & MMC_DATA_READ)) {
+		if (host->caps.has_bad_data_ordering)
+			for (i = 0; i < transfer_size; i++)
+				host->buffer[i] = swab32(host->buffer[i]);
+		sg_copy_from_buffer(host->data->sg, host->data->sg_len,
+		                    host->buffer, transfer_size);
+	}
+
+	atmci_pdc_cleanup(host);
+
+	dev_dbg(&host->pdev->dev, "(%s) set pending xfer complete\n", __func__);
+	atmci_set_pending(host, EVENT_XFER_COMPLETE);
+	tasklet_schedule(&host->tasklet);
+}
+
+static void atmci_dma_cleanup(struct atmel_mci *host)
+{
+	struct mmc_data                 *data = host->data;
+
+	if (data)
+		dma_unmap_sg(host->dma.chan->device->dev,
+				data->sg, data->sg_len,
+				((data->flags & MMC_DATA_WRITE)
+				 ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
+}
+
+/*
+ * This function is called by the DMA driver from tasklet context.
+ */
+static void atmci_dma_complete(void *arg)
+{
+	struct atmel_mci	*host = arg;
+	struct mmc_data		*data = host->data;
+
+	dev_vdbg(&host->pdev->dev, "DMA complete\n");
+
+	if (host->caps.has_dma_conf_reg)
+		/* Disable DMA hardware handshaking on MCI */
+		atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN);
+
+	atmci_dma_cleanup(host);
+
+	/*
+	 * If the card was removed, data will be NULL. No point trying
+	 * to send the stop command or waiting for NBUSY in this case.
+	 */
+	if (data) {
+		dev_dbg(&host->pdev->dev,
+		        "(%s) set pending xfer complete\n", __func__);
+		atmci_set_pending(host, EVENT_XFER_COMPLETE);
+		tasklet_schedule(&host->tasklet);
+
+		/*
+		 * Regardless of what the documentation says, we have
+		 * to wait for NOTBUSY even after block read
+		 * operations.
+		 *
+		 * When the DMA transfer is complete, the controller
+		 * may still be reading the CRC from the card, i.e.
+		 * the data transfer is still in progress and we
+		 * haven't seen all the potential error bits yet.
+		 *
+		 * The interrupt handler will schedule a different
+		 * tasklet to finish things up when the data transfer
+		 * is completely done.
+		 *
+		 * We may not complete the mmc request here anyway
+		 * because the mmc layer may call back and cause us to
+		 * violate the "don't submit new operations from the
+		 * completion callback" rule of the dma engine
+		 * framework.
+		 */
+		atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+	}
+}
+
+/*
+ * Returns a mask of interrupt flags to be enabled after the whole
+ * request has been prepared.
+ */
+static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data)
+{
+	u32 iflags;
+
+	data->error = -EINPROGRESS;
+
+	host->sg = data->sg;
+	host->sg_len = data->sg_len;
+	host->data = data;
+	host->data_chan = NULL;
+
+	iflags = ATMCI_DATA_ERROR_FLAGS;
+
+	/*
+	 * Errata: MMC data write operation with less than 12
+	 * bytes is impossible.
+	 *
+	 * Errata: MCI Transmit Data Register (TDR) FIFO
+	 * corruption when length is not multiple of 4.
+	 */
+	if (data->blocks * data->blksz < 12
+			|| (data->blocks * data->blksz) & 3)
+		host->need_reset = true;
+
+	host->pio_offset = 0;
+	if (data->flags & MMC_DATA_READ)
+		iflags |= ATMCI_RXRDY;
+	else
+		iflags |= ATMCI_TXRDY;
+
+	return iflags;
+}
+
+/*
+ * Set interrupt flags and set block length into the MCI mode register even
+ * if this value is also accessible in the MCI block register. It seems to be
+ * necessary before the High Speed MCI version. It also map sg and configure
+ * PDC registers.
+ */
+static u32
+atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data)
+{
+	u32 iflags, tmp;
+	unsigned int sg_len;
+	enum dma_data_direction dir;
+	int i;
+
+	data->error = -EINPROGRESS;
+
+	host->data = data;
+	host->sg = data->sg;
+	iflags = ATMCI_DATA_ERROR_FLAGS;
+
+	/* Enable pdc mode */
+	atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCMODE);
+
+	if (data->flags & MMC_DATA_READ) {
+		dir = DMA_FROM_DEVICE;
+		iflags |= ATMCI_ENDRX | ATMCI_RXBUFF;
+	} else {
+		dir = DMA_TO_DEVICE;
+		iflags |= ATMCI_ENDTX | ATMCI_TXBUFE | ATMCI_BLKE;
+	}
+
+	/* Set BLKLEN */
+	tmp = atmci_readl(host, ATMCI_MR);
+	tmp &= 0x0000ffff;
+	tmp |= ATMCI_BLKLEN(data->blksz);
+	atmci_writel(host, ATMCI_MR, tmp);
+
+	/* Configure PDC */
+	host->data_size = data->blocks * data->blksz;
+	sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir);
+
+	if ((!host->caps.has_rwproof)
+	    && (host->data->flags & MMC_DATA_WRITE)) {
+		sg_copy_to_buffer(host->data->sg, host->data->sg_len,
+		                  host->buffer, host->data_size);
+		if (host->caps.has_bad_data_ordering)
+			for (i = 0; i < host->data_size; i++)
+				host->buffer[i] = swab32(host->buffer[i]);
+	}
+
+	if (host->data_size)
+		atmci_pdc_set_both_buf(host,
+			((dir == DMA_FROM_DEVICE) ? XFER_RECEIVE : XFER_TRANSMIT));
+
+	return iflags;
+}
+
+static u32
+atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
+{
+	struct dma_chan			*chan;
+	struct dma_async_tx_descriptor	*desc;
+	struct scatterlist		*sg;
+	unsigned int			i;
+	enum dma_data_direction		direction;
+	enum dma_transfer_direction	slave_dirn;
+	unsigned int			sglen;
+	u32				maxburst;
+	u32 iflags;
+
+	data->error = -EINPROGRESS;
+
+	WARN_ON(host->data);
+	host->sg = NULL;
+	host->data = data;
+
+	iflags = ATMCI_DATA_ERROR_FLAGS;
+
+	/*
+	 * We don't do DMA on "complex" transfers, i.e. with
+	 * non-word-aligned buffers or lengths. Also, we don't bother
+	 * with all the DMA setup overhead for short transfers.
+	 */
+	if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD)
+		return atmci_prepare_data(host, data);
+	if (data->blksz & 3)
+		return atmci_prepare_data(host, data);
+
+	for_each_sg(data->sg, sg, data->sg_len, i) {
+		if (sg->offset & 3 || sg->length & 3)
+			return atmci_prepare_data(host, data);
+	}
+
+	/* If we don't have a channel, we can't do DMA */
+	chan = host->dma.chan;
+	if (chan)
+		host->data_chan = chan;
+
+	if (!chan)
+		return -ENODEV;
+
+	if (data->flags & MMC_DATA_READ) {
+		direction = DMA_FROM_DEVICE;
+		host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
+		maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst);
+	} else {
+		direction = DMA_TO_DEVICE;
+		host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
+		maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
+	}
+
+	if (host->caps.has_dma_conf_reg)
+		atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) |
+			ATMCI_DMAEN);
+
+	sglen = dma_map_sg(chan->device->dev, data->sg,
+			data->sg_len, direction);
+
+	dmaengine_slave_config(chan, &host->dma_conf);
+	desc = dmaengine_prep_slave_sg(chan,
+			data->sg, sglen, slave_dirn,
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc)
+		goto unmap_exit;
+
+	host->dma.data_desc = desc;
+	desc->callback = atmci_dma_complete;
+	desc->callback_param = host;
+
+	return iflags;
+unmap_exit:
+	dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, direction);
+	return -ENOMEM;
+}
+
+static void
+atmci_submit_data(struct atmel_mci *host, struct mmc_data *data)
+{
+	return;
+}
+
+/*
+ * Start PDC according to transfer direction.
+ */
+static void
+atmci_submit_data_pdc(struct atmel_mci *host, struct mmc_data *data)
+{
+	if (data->flags & MMC_DATA_READ)
+		atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
+	else
+		atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
+}
+
+static void
+atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
+{
+	struct dma_chan			*chan = host->data_chan;
+	struct dma_async_tx_descriptor	*desc = host->dma.data_desc;
+
+	if (chan) {
+		dmaengine_submit(desc);
+		dma_async_issue_pending(chan);
+	}
+}
+
+static void atmci_stop_transfer(struct atmel_mci *host)
+{
+	dev_dbg(&host->pdev->dev,
+	        "(%s) set pending xfer complete\n", __func__);
+	atmci_set_pending(host, EVENT_XFER_COMPLETE);
+	atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+}
+
+/*
+ * Stop data transfer because error(s) occurred.
+ */
+static void atmci_stop_transfer_pdc(struct atmel_mci *host)
+{
+	atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
+}
+
+static void atmci_stop_transfer_dma(struct atmel_mci *host)
+{
+	struct dma_chan *chan = host->data_chan;
+
+	if (chan) {
+		dmaengine_terminate_all(chan);
+		atmci_dma_cleanup(host);
+	} else {
+		/* Data transfer was stopped by the interrupt handler */
+		dev_dbg(&host->pdev->dev,
+		        "(%s) set pending xfer complete\n", __func__);
+		atmci_set_pending(host, EVENT_XFER_COMPLETE);
+		atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+	}
+}
+
+/*
+ * Start a request: prepare data if needed, prepare the command and activate
+ * interrupts.
+ */
+static void atmci_start_request(struct atmel_mci *host,
+		struct atmel_mci_slot *slot)
+{
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	u32			iflags;
+	u32			cmdflags;
+
+	mrq = slot->mrq;
+	host->cur_slot = slot;
+	host->mrq = mrq;
+
+	host->pending_events = 0;
+	host->completed_events = 0;
+	host->cmd_status = 0;
+	host->data_status = 0;
+
+	dev_dbg(&host->pdev->dev, "start request: cmd %u\n", mrq->cmd->opcode);
+
+	if (host->need_reset || host->caps.need_reset_after_xfer) {
+		iflags = atmci_readl(host, ATMCI_IMR);
+		iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB);
+		atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
+		atmci_writel(host, ATMCI_MR, host->mode_reg);
+		if (host->caps.has_cfg_reg)
+			atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+		atmci_writel(host, ATMCI_IER, iflags);
+		host->need_reset = false;
+	}
+	atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);
+
+	iflags = atmci_readl(host, ATMCI_IMR);
+	if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB))
+		dev_dbg(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n",
+				iflags);
+
+	if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) {
+		/* Send init sequence (74 clock cycles) */
+		atmci_writel(host, ATMCI_CMDR, ATMCI_CMDR_SPCMD_INIT);
+		while (!(atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY))
+			cpu_relax();
+	}
+	iflags = 0;
+	data = mrq->data;
+	if (data) {
+		atmci_set_timeout(host, slot, data);
+
+		/* Must set block count/size before sending command */
+		atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(data->blocks)
+				| ATMCI_BLKLEN(data->blksz));
+		dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n",
+			ATMCI_BCNT(data->blocks) | ATMCI_BLKLEN(data->blksz));
+
+		iflags |= host->prepare_data(host, data);
+	}
+
+	iflags |= ATMCI_CMDRDY;
+	cmd = mrq->cmd;
+	cmdflags = atmci_prepare_command(slot->mmc, cmd);
+
+	/*
+	 * DMA transfer should be started before sending the command to avoid
+	 * unexpected errors especially for read operations in SDIO mode.
+	 * Unfortunately, in PDC mode, command has to be sent before starting
+	 * the transfer.
+	 */
+	if (host->submit_data != &atmci_submit_data_dma)
+		atmci_send_command(host, cmd, cmdflags);
+
+	if (data)
+		host->submit_data(host, data);
+
+	if (host->submit_data == &atmci_submit_data_dma)
+		atmci_send_command(host, cmd, cmdflags);
+
+	if (mrq->stop) {
+		host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
+		host->stop_cmdr |= ATMCI_CMDR_STOP_XFER;
+		if (!(data->flags & MMC_DATA_WRITE))
+			host->stop_cmdr |= ATMCI_CMDR_TRDIR_READ;
+		if (data->flags & MMC_DATA_STREAM)
+			host->stop_cmdr |= ATMCI_CMDR_STREAM;
+		else
+			host->stop_cmdr |= ATMCI_CMDR_MULTI_BLOCK;
+	}
+
+	/*
+	 * We could have enabled interrupts earlier, but I suspect
+	 * that would open up a nice can of interesting race
+	 * conditions (e.g. command and data complete, but stop not
+	 * prepared yet.)
+	 */
+	atmci_writel(host, ATMCI_IER, iflags);
+
+	mod_timer(&host->timer, jiffies +  msecs_to_jiffies(2000));
+}
+
+static void atmci_queue_request(struct atmel_mci *host,
+		struct atmel_mci_slot *slot, struct mmc_request *mrq)
+{
+	dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
+			host->state);
+
+	spin_lock_bh(&host->lock);
+	slot->mrq = mrq;
+	if (host->state == STATE_IDLE) {
+		host->state = STATE_SENDING_CMD;
+		atmci_start_request(host, slot);
+	} else {
+		dev_dbg(&host->pdev->dev, "queue request\n");
+		list_add_tail(&slot->queue_node, &host->queue);
+	}
+	spin_unlock_bh(&host->lock);
+}
+
+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct atmel_mci_slot	*slot = mmc_priv(mmc);
+	struct atmel_mci	*host = slot->host;
+	struct mmc_data		*data;
+
+	WARN_ON(slot->mrq);
+	dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode);
+
+	pm_runtime_get_sync(&host->pdev->dev);
+
+	/*
+	 * We may "know" the card is gone even though there's still an
+	 * electrical connection. If so, we really need to communicate
+	 * this to the MMC core since there won't be any more
+	 * interrupts as the card is completely removed. Otherwise,
+	 * the MMC core might believe the card is still there even
+	 * though the card was just removed very slowly.
+	 */
+	if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) {
+		mrq->cmd->error = -ENOMEDIUM;
+		mmc_request_done(mmc, mrq);
+		return;
+	}
+
+	/* We don't support multiple blocks of weird lengths. */
+	data = mrq->data;
+	if (data && data->blocks > 1 && data->blksz & 3) {
+		mrq->cmd->error = -EINVAL;
+		mmc_request_done(mmc, mrq);
+	}
+
+	atmci_queue_request(host, slot, mrq);
+}
+
+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct atmel_mci_slot	*slot = mmc_priv(mmc);
+	struct atmel_mci	*host = slot->host;
+	unsigned int		i;
+
+	pm_runtime_get_sync(&host->pdev->dev);
+
+	slot->sdc_reg &= ~ATMCI_SDCBUS_MASK;
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_1:
+		slot->sdc_reg |= ATMCI_SDCBUS_1BIT;
+		break;
+	case MMC_BUS_WIDTH_4:
+		slot->sdc_reg |= ATMCI_SDCBUS_4BIT;
+		break;
+	}
+
+	if (ios->clock) {
+		unsigned int clock_min = ~0U;
+		int clkdiv;
+
+		spin_lock_bh(&host->lock);
+		if (!host->mode_reg) {
+			atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+			atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
+			if (host->caps.has_cfg_reg)
+				atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+		}
+
+		/*
+		 * Use mirror of ios->clock to prevent race with mmc
+		 * core ios update when finding the minimum.
+		 */
+		slot->clock = ios->clock;
+		for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
+			if (host->slot[i] && host->slot[i]->clock
+					&& host->slot[i]->clock < clock_min)
+				clock_min = host->slot[i]->clock;
+		}
+
+		/* Calculate clock divider */
+		if (host->caps.has_odd_clk_div) {
+			clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2;
+			if (clkdiv < 0) {
+				dev_warn(&mmc->class_dev,
+					 "clock %u too fast; using %lu\n",
+					 clock_min, host->bus_hz / 2);
+				clkdiv = 0;
+			} else if (clkdiv > 511) {
+				dev_warn(&mmc->class_dev,
+				         "clock %u too slow; using %lu\n",
+				         clock_min, host->bus_hz / (511 + 2));
+				clkdiv = 511;
+			}
+			host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1)
+			                 | ATMCI_MR_CLKODD(clkdiv & 1);
+		} else {
+			clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
+			if (clkdiv > 255) {
+				dev_warn(&mmc->class_dev,
+				         "clock %u too slow; using %lu\n",
+				         clock_min, host->bus_hz / (2 * 256));
+				clkdiv = 255;
+			}
+			host->mode_reg = ATMCI_MR_CLKDIV(clkdiv);
+		}
+
+		/*
+		 * WRPROOF and RDPROOF prevent overruns/underruns by
+		 * stopping the clock when the FIFO is full/empty.
+		 * This state is not expected to last for long.
+		 */
+		if (host->caps.has_rwproof)
+			host->mode_reg |= (ATMCI_MR_WRPROOF | ATMCI_MR_RDPROOF);
+
+		if (host->caps.has_cfg_reg) {
+			/* setup High Speed mode in relation with card capacity */
+			if (ios->timing == MMC_TIMING_SD_HS)
+				host->cfg_reg |= ATMCI_CFG_HSMODE;
+			else
+				host->cfg_reg &= ~ATMCI_CFG_HSMODE;
+		}
+
+		if (list_empty(&host->queue)) {
+			atmci_writel(host, ATMCI_MR, host->mode_reg);
+			if (host->caps.has_cfg_reg)
+				atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+		} else {
+			host->need_clock_update = true;
+		}
+
+		spin_unlock_bh(&host->lock);
+	} else {
+		bool any_slot_active = false;
+
+		spin_lock_bh(&host->lock);
+		slot->clock = 0;
+		for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
+			if (host->slot[i] && host->slot[i]->clock) {
+				any_slot_active = true;
+				break;
+			}
+		}
+		if (!any_slot_active) {
+			atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
+			if (host->mode_reg) {
+				atmci_readl(host, ATMCI_MR);
+			}
+			host->mode_reg = 0;
+		}
+		spin_unlock_bh(&host->lock);
+	}
+
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		if (!IS_ERR(mmc->supply.vmmc))
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+		break;
+	case MMC_POWER_UP:
+		set_bit(ATMCI_CARD_NEED_INIT, &slot->flags);
+		if (!IS_ERR(mmc->supply.vmmc))
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
+		break;
+	default:
+		/*
+		 * TODO: None of the currently available AVR32-based
+		 * boards allow MMC power to be turned off. Implement
+		 * power control when this can be tested properly.
+		 *
+		 * We also need to hook this into the clock management
+		 * somehow so that newly inserted cards aren't
+		 * subjected to a fast clock before we have a chance
+		 * to figure out what the maximum rate is. Currently,
+		 * there's no way to avoid this, and there never will
+		 * be for boards that don't support power control.
+		 */
+		break;
+	}
+
+	pm_runtime_mark_last_busy(&host->pdev->dev);
+	pm_runtime_put_autosuspend(&host->pdev->dev);
+}
+
+static int atmci_get_ro(struct mmc_host *mmc)
+{
+	int			read_only = -ENOSYS;
+	struct atmel_mci_slot	*slot = mmc_priv(mmc);
+
+	if (gpio_is_valid(slot->wp_pin)) {
+		read_only = gpio_get_value(slot->wp_pin);
+		dev_dbg(&mmc->class_dev, "card is %s\n",
+				read_only ? "read-only" : "read-write");
+	}
+
+	return read_only;
+}
+
+static int atmci_get_cd(struct mmc_host *mmc)
+{
+	int			present = -ENOSYS;
+	struct atmel_mci_slot	*slot = mmc_priv(mmc);
+
+	if (gpio_is_valid(slot->detect_pin)) {
+		present = !(gpio_get_value(slot->detect_pin) ^
+			    slot->detect_is_active_high);
+		dev_dbg(&mmc->class_dev, "card is %spresent\n",
+				present ? "" : "not ");
+	}
+
+	return present;
+}
+
+static void atmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct atmel_mci_slot	*slot = mmc_priv(mmc);
+	struct atmel_mci	*host = slot->host;
+
+	if (enable)
+		atmci_writel(host, ATMCI_IER, slot->sdio_irq);
+	else
+		atmci_writel(host, ATMCI_IDR, slot->sdio_irq);
+}
+
+static const struct mmc_host_ops atmci_ops = {
+	.request	= atmci_request,
+	.set_ios	= atmci_set_ios,
+	.get_ro		= atmci_get_ro,
+	.get_cd		= atmci_get_cd,
+	.enable_sdio_irq = atmci_enable_sdio_irq,
+};
+
+/* Called with host->lock held */
+static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
+	__releases(&host->lock)
+	__acquires(&host->lock)
+{
+	struct atmel_mci_slot	*slot = NULL;
+	struct mmc_host		*prev_mmc = host->cur_slot->mmc;
+
+	WARN_ON(host->cmd || host->data);
+
+	/*
+	 * Update the MMC clock rate if necessary. This may be
+	 * necessary if set_ios() is called when a different slot is
+	 * busy transferring data.
+	 */
+	if (host->need_clock_update) {
+		atmci_writel(host, ATMCI_MR, host->mode_reg);
+		if (host->caps.has_cfg_reg)
+			atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+	}
+
+	host->cur_slot->mrq = NULL;
+	host->mrq = NULL;
+	if (!list_empty(&host->queue)) {
+		slot = list_entry(host->queue.next,
+				struct atmel_mci_slot, queue_node);
+		list_del(&slot->queue_node);
+		dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n",
+				mmc_hostname(slot->mmc));
+		host->state = STATE_SENDING_CMD;
+		atmci_start_request(host, slot);
+	} else {
+		dev_vdbg(&host->pdev->dev, "list empty\n");
+		host->state = STATE_IDLE;
+	}
+
+	del_timer(&host->timer);
+
+	spin_unlock(&host->lock);
+	mmc_request_done(prev_mmc, mrq);
+	spin_lock(&host->lock);
+
+	pm_runtime_mark_last_busy(&host->pdev->dev);
+	pm_runtime_put_autosuspend(&host->pdev->dev);
+}
+
+static void atmci_command_complete(struct atmel_mci *host,
+			struct mmc_command *cmd)
+{
+	u32		status = host->cmd_status;
+
+	/* Read the response from the card (up to 16 bytes) */
+	cmd->resp[0] = atmci_readl(host, ATMCI_RSPR);
+	cmd->resp[1] = atmci_readl(host, ATMCI_RSPR);
+	cmd->resp[2] = atmci_readl(host, ATMCI_RSPR);
+	cmd->resp[3] = atmci_readl(host, ATMCI_RSPR);
+
+	if (status & ATMCI_RTOE)
+		cmd->error = -ETIMEDOUT;
+	else if ((cmd->flags & MMC_RSP_CRC) && (status & ATMCI_RCRCE))
+		cmd->error = -EILSEQ;
+	else if (status & (ATMCI_RINDE | ATMCI_RDIRE | ATMCI_RENDE))
+		cmd->error = -EIO;
+	else if (host->mrq->data && (host->mrq->data->blksz & 3)) {
+		if (host->caps.need_blksz_mul_4) {
+			cmd->error = -EINVAL;
+			host->need_reset = 1;
+		}
+	} else
+		cmd->error = 0;
+}
+
+static void atmci_detect_change(unsigned long data)
+{
+	struct atmel_mci_slot	*slot = (struct atmel_mci_slot *)data;
+	bool			present;
+	bool			present_old;
+
+	/*
+	 * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before
+	 * freeing the interrupt. We must not re-enable the interrupt
+	 * if it has been freed, and if we're shutting down, it
+	 * doesn't really matter whether the card is present or not.
+	 */
+	smp_rmb();
+	if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
+		return;
+
+	enable_irq(gpio_to_irq(slot->detect_pin));
+	present = !(gpio_get_value(slot->detect_pin) ^
+		    slot->detect_is_active_high);
+	present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
+
+	dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n",
+			present, present_old);
+
+	if (present != present_old) {
+		struct atmel_mci	*host = slot->host;
+		struct mmc_request	*mrq;
+
+		dev_dbg(&slot->mmc->class_dev, "card %s\n",
+			present ? "inserted" : "removed");
+
+		spin_lock(&host->lock);
+
+		if (!present)
+			clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
+		else
+			set_bit(ATMCI_CARD_PRESENT, &slot->flags);
+
+		/* Clean up queue if present */
+		mrq = slot->mrq;
+		if (mrq) {
+			if (mrq == host->mrq) {
+				/*
+				 * Reset controller to terminate any ongoing
+				 * commands or data transfers.
+				 */
+				atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+				atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
+				atmci_writel(host, ATMCI_MR, host->mode_reg);
+				if (host->caps.has_cfg_reg)
+					atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+
+				host->data = NULL;
+				host->cmd = NULL;
+
+				switch (host->state) {
+				case STATE_IDLE:
+					break;
+				case STATE_SENDING_CMD:
+					mrq->cmd->error = -ENOMEDIUM;
+					if (mrq->data)
+						host->stop_transfer(host);
+					break;
+				case STATE_DATA_XFER:
+					mrq->data->error = -ENOMEDIUM;
+					host->stop_transfer(host);
+					break;
+				case STATE_WAITING_NOTBUSY:
+					mrq->data->error = -ENOMEDIUM;
+					break;
+				case STATE_SENDING_STOP:
+					mrq->stop->error = -ENOMEDIUM;
+					break;
+				case STATE_END_REQUEST:
+					break;
+				}
+
+				atmci_request_end(host, mrq);
+			} else {
+				list_del(&slot->queue_node);
+				mrq->cmd->error = -ENOMEDIUM;
+				if (mrq->data)
+					mrq->data->error = -ENOMEDIUM;
+				if (mrq->stop)
+					mrq->stop->error = -ENOMEDIUM;
+
+				spin_unlock(&host->lock);
+				mmc_request_done(slot->mmc, mrq);
+				spin_lock(&host->lock);
+			}
+		}
+		spin_unlock(&host->lock);
+
+		mmc_detect_change(slot->mmc, 0);
+	}
+}
+
+static void atmci_tasklet_func(unsigned long priv)
+{
+	struct atmel_mci	*host = (struct atmel_mci *)priv;
+	struct mmc_request	*mrq = host->mrq;
+	struct mmc_data		*data = host->data;
+	enum atmel_mci_state	state = host->state;
+	enum atmel_mci_state	prev_state;
+	u32			status;
+
+	spin_lock(&host->lock);
+
+	state = host->state;
+
+	dev_vdbg(&host->pdev->dev,
+		"tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
+		state, host->pending_events, host->completed_events,
+		atmci_readl(host, ATMCI_IMR));
+
+	do {
+		prev_state = state;
+		dev_dbg(&host->pdev->dev, "FSM: state=%d\n", state);
+
+		switch (state) {
+		case STATE_IDLE:
+			break;
+
+		case STATE_SENDING_CMD:
+			/*
+			 * Command has been sent, we are waiting for command
+			 * ready. Then we have three next states possible:
+			 * END_REQUEST by default, WAITING_NOTBUSY if it's a
+			 * command needing it or DATA_XFER if there is data.
+			 */
+			dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n");
+			if (!atmci_test_and_clear_pending(host,
+						EVENT_CMD_RDY))
+				break;
+
+			dev_dbg(&host->pdev->dev, "set completed cmd ready\n");
+			host->cmd = NULL;
+			atmci_set_completed(host, EVENT_CMD_RDY);
+			atmci_command_complete(host, mrq->cmd);
+			if (mrq->data) {
+				dev_dbg(&host->pdev->dev,
+				        "command with data transfer");
+				/*
+				 * If there is a command error don't start
+				 * data transfer.
+				 */
+				if (mrq->cmd->error) {
+					host->stop_transfer(host);
+					host->data = NULL;
+					atmci_writel(host, ATMCI_IDR,
+					             ATMCI_TXRDY | ATMCI_RXRDY
+					             | ATMCI_DATA_ERROR_FLAGS);
+					state = STATE_END_REQUEST;
+				} else
+					state = STATE_DATA_XFER;
+			} else if ((!mrq->data) && (mrq->cmd->flags & MMC_RSP_BUSY)) {
+				dev_dbg(&host->pdev->dev,
+				        "command response need waiting notbusy");
+				atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+				state = STATE_WAITING_NOTBUSY;
+			} else
+				state = STATE_END_REQUEST;
+
+			break;
+
+		case STATE_DATA_XFER:
+			if (atmci_test_and_clear_pending(host,
+						EVENT_DATA_ERROR)) {
+				dev_dbg(&host->pdev->dev, "set completed data error\n");
+				atmci_set_completed(host, EVENT_DATA_ERROR);
+				state = STATE_END_REQUEST;
+				break;
+			}
+
+			/*
+			 * A data transfer is in progress. The event expected
+			 * to move to the next state depends of data transfer
+			 * type (PDC or DMA). Once transfer done we can move
+			 * to the next step which is WAITING_NOTBUSY in write
+			 * case and directly SENDING_STOP in read case.
+			 */
+			dev_dbg(&host->pdev->dev, "FSM: xfer complete?\n");
+			if (!atmci_test_and_clear_pending(host,
+						EVENT_XFER_COMPLETE))
+				break;
+
+			dev_dbg(&host->pdev->dev,
+			        "(%s) set completed xfer complete\n",
+				__func__);
+			atmci_set_completed(host, EVENT_XFER_COMPLETE);
+
+			if (host->caps.need_notbusy_for_read_ops ||
+			   (host->data->flags & MMC_DATA_WRITE)) {
+				atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+				state = STATE_WAITING_NOTBUSY;
+			} else if (host->mrq->stop) {
+				atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
+				atmci_send_stop_cmd(host, data);
+				state = STATE_SENDING_STOP;
+			} else {
+				host->data = NULL;
+				data->bytes_xfered = data->blocks * data->blksz;
+				data->error = 0;
+				state = STATE_END_REQUEST;
+			}
+			break;
+
+		case STATE_WAITING_NOTBUSY:
+			/*
+			 * We can be in the state for two reasons: a command
+			 * requiring waiting not busy signal (stop command
+			 * included) or a write operation. In the latest case,
+			 * we need to send a stop command.
+			 */
+			dev_dbg(&host->pdev->dev, "FSM: not busy?\n");
+			if (!atmci_test_and_clear_pending(host,
+						EVENT_NOTBUSY))
+				break;
+
+			dev_dbg(&host->pdev->dev, "set completed not busy\n");
+			atmci_set_completed(host, EVENT_NOTBUSY);
+
+			if (host->data) {
+				/*
+				 * For some commands such as CMD53, even if
+				 * there is data transfer, there is no stop
+				 * command to send.
+				 */
+				if (host->mrq->stop) {
+					atmci_writel(host, ATMCI_IER,
+					             ATMCI_CMDRDY);
+					atmci_send_stop_cmd(host, data);
+					state = STATE_SENDING_STOP;
+				} else {
+					host->data = NULL;
+					data->bytes_xfered = data->blocks
+					                     * data->blksz;
+					data->error = 0;
+					state = STATE_END_REQUEST;
+				}
+			} else
+				state = STATE_END_REQUEST;
+			break;
+
+		case STATE_SENDING_STOP:
+			/*
+			 * In this state, it is important to set host->data to
+			 * NULL (which is tested in the waiting notbusy state)
+			 * in order to go to the end request state instead of
+			 * sending stop again.
+			 */
+			dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n");
+			if (!atmci_test_and_clear_pending(host,
+						EVENT_CMD_RDY))
+				break;
+
+			dev_dbg(&host->pdev->dev, "FSM: cmd ready\n");
+			host->cmd = NULL;
+			data->bytes_xfered = data->blocks * data->blksz;
+			data->error = 0;
+			atmci_command_complete(host, mrq->stop);
+			if (mrq->stop->error) {
+				host->stop_transfer(host);
+				atmci_writel(host, ATMCI_IDR,
+				             ATMCI_TXRDY | ATMCI_RXRDY
+				             | ATMCI_DATA_ERROR_FLAGS);
+				state = STATE_END_REQUEST;
+			} else {
+				atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+				state = STATE_WAITING_NOTBUSY;
+			}
+			host->data = NULL;
+			break;
+
+		case STATE_END_REQUEST:
+			atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY | ATMCI_RXRDY
+			                   | ATMCI_DATA_ERROR_FLAGS);
+			status = host->data_status;
+			if (unlikely(status)) {
+				host->stop_transfer(host);
+				host->data = NULL;
+				if (data) {
+					if (status & ATMCI_DTOE) {
+						data->error = -ETIMEDOUT;
+					} else if (status & ATMCI_DCRCE) {
+						data->error = -EILSEQ;
+					} else {
+						data->error = -EIO;
+					}
+				}
+			}
+
+			atmci_request_end(host, host->mrq);
+			state = STATE_IDLE;
+			break;
+		}
+	} while (state != prev_state);
+
+	host->state = state;
+
+	spin_unlock(&host->lock);
+}
+
+static void atmci_read_data_pio(struct atmel_mci *host)
+{
+	struct scatterlist	*sg = host->sg;
+	void			*buf = sg_virt(sg);
+	unsigned int		offset = host->pio_offset;
+	struct mmc_data		*data = host->data;
+	u32			value;
+	u32			status;
+	unsigned int		nbytes = 0;
+
+	do {
+		value = atmci_readl(host, ATMCI_RDR);
+		if (likely(offset + 4 <= sg->length)) {
+			put_unaligned(value, (u32 *)(buf + offset));
+
+			offset += 4;
+			nbytes += 4;
+
+			if (offset == sg->length) {
+				flush_dcache_page(sg_page(sg));
+				host->sg = sg = sg_next(sg);
+				host->sg_len--;
+				if (!sg || !host->sg_len)
+					goto done;
+
+				offset = 0;
+				buf = sg_virt(sg);
+			}
+		} else {
+			unsigned int remaining = sg->length - offset;
+			memcpy(buf + offset, &value, remaining);
+			nbytes += remaining;
+
+			flush_dcache_page(sg_page(sg));
+			host->sg = sg = sg_next(sg);
+			host->sg_len--;
+			if (!sg || !host->sg_len)
+				goto done;
+
+			offset = 4 - remaining;
+			buf = sg_virt(sg);
+			memcpy(buf, (u8 *)&value + remaining, offset);
+			nbytes += offset;
+		}
+
+		status = atmci_readl(host, ATMCI_SR);
+		if (status & ATMCI_DATA_ERROR_FLAGS) {
+			atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_RXRDY
+						| ATMCI_DATA_ERROR_FLAGS));
+			host->data_status = status;
+			data->bytes_xfered += nbytes;
+			return;
+		}
+	} while (status & ATMCI_RXRDY);
+
+	host->pio_offset = offset;
+	data->bytes_xfered += nbytes;
+
+	return;
+
+done:
+	atmci_writel(host, ATMCI_IDR, ATMCI_RXRDY);
+	atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+	data->bytes_xfered += nbytes;
+	smp_wmb();
+	atmci_set_pending(host, EVENT_XFER_COMPLETE);
+}
+
+static void atmci_write_data_pio(struct atmel_mci *host)
+{
+	struct scatterlist	*sg = host->sg;
+	void			*buf = sg_virt(sg);
+	unsigned int		offset = host->pio_offset;
+	struct mmc_data		*data = host->data;
+	u32			value;
+	u32			status;
+	unsigned int		nbytes = 0;
+
+	do {
+		if (likely(offset + 4 <= sg->length)) {
+			value = get_unaligned((u32 *)(buf + offset));
+			atmci_writel(host, ATMCI_TDR, value);
+
+			offset += 4;
+			nbytes += 4;
+			if (offset == sg->length) {
+				host->sg = sg = sg_next(sg);
+				host->sg_len--;
+				if (!sg || !host->sg_len)
+					goto done;
+
+				offset = 0;
+				buf = sg_virt(sg);
+			}
+		} else {
+			unsigned int remaining = sg->length - offset;
+
+			value = 0;
+			memcpy(&value, buf + offset, remaining);
+			nbytes += remaining;
+
+			host->sg = sg = sg_next(sg);
+			host->sg_len--;
+			if (!sg || !host->sg_len) {
+				atmci_writel(host, ATMCI_TDR, value);
+				goto done;
+			}
+
+			offset = 4 - remaining;
+			buf = sg_virt(sg);
+			memcpy((u8 *)&value + remaining, buf, offset);
+			atmci_writel(host, ATMCI_TDR, value);
+			nbytes += offset;
+		}
+
+		status = atmci_readl(host, ATMCI_SR);
+		if (status & ATMCI_DATA_ERROR_FLAGS) {
+			atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_TXRDY
+						| ATMCI_DATA_ERROR_FLAGS));
+			host->data_status = status;
+			data->bytes_xfered += nbytes;
+			return;
+		}
+	} while (status & ATMCI_TXRDY);
+
+	host->pio_offset = offset;
+	data->bytes_xfered += nbytes;
+
+	return;
+
+done:
+	atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY);
+	atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+	data->bytes_xfered += nbytes;
+	smp_wmb();
+	atmci_set_pending(host, EVENT_XFER_COMPLETE);
+}
+
+static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status)
+{
+	int	i;
+
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
+		struct atmel_mci_slot *slot = host->slot[i];
+		if (slot && (status & slot->sdio_irq)) {
+			mmc_signal_sdio_irq(slot->mmc);
+		}
+	}
+}
+
+
+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+{
+	struct atmel_mci	*host = dev_id;
+	u32			status, mask, pending;
+	unsigned int		pass_count = 0;
+
+	do {
+		status = atmci_readl(host, ATMCI_SR);
+		mask = atmci_readl(host, ATMCI_IMR);
+		pending = status & mask;
+		if (!pending)
+			break;
+
+		if (pending & ATMCI_DATA_ERROR_FLAGS) {
+			dev_dbg(&host->pdev->dev, "IRQ: data error\n");
+			atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS
+					| ATMCI_RXRDY | ATMCI_TXRDY
+					| ATMCI_ENDRX | ATMCI_ENDTX
+					| ATMCI_RXBUFF | ATMCI_TXBUFE);
+
+			host->data_status = status;
+			dev_dbg(&host->pdev->dev, "set pending data error\n");
+			smp_wmb();
+			atmci_set_pending(host, EVENT_DATA_ERROR);
+			tasklet_schedule(&host->tasklet);
+		}
+
+		if (pending & ATMCI_TXBUFE) {
+			dev_dbg(&host->pdev->dev, "IRQ: tx buffer empty\n");
+			atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE);
+			atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
+			/*
+			 * We can receive this interruption before having configured
+			 * the second pdc buffer, so we need to reconfigure first and
+			 * second buffers again
+			 */
+			if (host->data_size) {
+				atmci_pdc_set_both_buf(host, XFER_TRANSMIT);
+				atmci_writel(host, ATMCI_IER, ATMCI_ENDTX);
+				atmci_writel(host, ATMCI_IER, ATMCI_TXBUFE);
+			} else {
+				atmci_pdc_complete(host);
+			}
+		} else if (pending & ATMCI_ENDTX) {
+			dev_dbg(&host->pdev->dev, "IRQ: end of tx buffer\n");
+			atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
+
+			if (host->data_size) {
+				atmci_pdc_set_single_buf(host,
+						XFER_TRANSMIT, PDC_SECOND_BUF);
+				atmci_writel(host, ATMCI_IER, ATMCI_ENDTX);
+			}
+		}
+
+		if (pending & ATMCI_RXBUFF) {
+			dev_dbg(&host->pdev->dev, "IRQ: rx buffer full\n");
+			atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF);
+			atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
+			/*
+			 * We can receive this interruption before having configured
+			 * the second pdc buffer, so we need to reconfigure first and
+			 * second buffers again
+			 */
+			if (host->data_size) {
+				atmci_pdc_set_both_buf(host, XFER_RECEIVE);
+				atmci_writel(host, ATMCI_IER, ATMCI_ENDRX);
+				atmci_writel(host, ATMCI_IER, ATMCI_RXBUFF);
+			} else {
+				atmci_pdc_complete(host);
+			}
+		} else if (pending & ATMCI_ENDRX) {
+			dev_dbg(&host->pdev->dev, "IRQ: end of rx buffer\n");
+			atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
+
+			if (host->data_size) {
+				atmci_pdc_set_single_buf(host,
+						XFER_RECEIVE, PDC_SECOND_BUF);
+				atmci_writel(host, ATMCI_IER, ATMCI_ENDRX);
+			}
+		}
+
+		/*
+		 * First mci IPs, so mainly the ones having pdc, have some
+		 * issues with the notbusy signal. You can't get it after
+		 * data transmission if you have not sent a stop command.
+		 * The appropriate workaround is to use the BLKE signal.
+		 */
+		if (pending & ATMCI_BLKE) {
+			dev_dbg(&host->pdev->dev, "IRQ: blke\n");
+			atmci_writel(host, ATMCI_IDR, ATMCI_BLKE);
+			smp_wmb();
+			dev_dbg(&host->pdev->dev, "set pending notbusy\n");
+			atmci_set_pending(host, EVENT_NOTBUSY);
+			tasklet_schedule(&host->tasklet);
+		}
+
+		if (pending & ATMCI_NOTBUSY) {
+			dev_dbg(&host->pdev->dev, "IRQ: not_busy\n");
+			atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY);
+			smp_wmb();
+			dev_dbg(&host->pdev->dev, "set pending notbusy\n");
+			atmci_set_pending(host, EVENT_NOTBUSY);
+			tasklet_schedule(&host->tasklet);
+		}
+
+		if (pending & ATMCI_RXRDY)
+			atmci_read_data_pio(host);
+		if (pending & ATMCI_TXRDY)
+			atmci_write_data_pio(host);
+
+		if (pending & ATMCI_CMDRDY) {
+			dev_dbg(&host->pdev->dev, "IRQ: cmd ready\n");
+			atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY);
+			host->cmd_status = status;
+			smp_wmb();
+			dev_dbg(&host->pdev->dev, "set pending cmd rdy\n");
+			atmci_set_pending(host, EVENT_CMD_RDY);
+			tasklet_schedule(&host->tasklet);
+		}
+
+		if (pending & (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB))
+			atmci_sdio_interrupt(host, status);
+
+	} while (pass_count++ < 5);
+
+	return pass_count ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
+{
+	struct atmel_mci_slot	*slot = dev_id;
+
+	/*
+	 * Disable interrupts until the pin has stabilized and check
+	 * the state then. Use mod_timer() since we may be in the
+	 * middle of the timer routine when this interrupt triggers.
+	 */
+	disable_irq_nosync(irq);
+	mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20));
+
+	return IRQ_HANDLED;
+}
+
+static int atmci_init_slot(struct atmel_mci *host,
+		struct mci_slot_pdata *slot_data, unsigned int id,
+		u32 sdc_reg, u32 sdio_irq)
+{
+	struct mmc_host			*mmc;
+	struct atmel_mci_slot		*slot;
+
+	mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev);
+	if (!mmc)
+		return -ENOMEM;
+
+	slot = mmc_priv(mmc);
+	slot->mmc = mmc;
+	slot->host = host;
+	slot->detect_pin = slot_data->detect_pin;
+	slot->wp_pin = slot_data->wp_pin;
+	slot->detect_is_active_high = slot_data->detect_is_active_high;
+	slot->sdc_reg = sdc_reg;
+	slot->sdio_irq = sdio_irq;
+
+	dev_dbg(&mmc->class_dev,
+	        "slot[%u]: bus_width=%u, detect_pin=%d, "
+		"detect_is_active_high=%s, wp_pin=%d\n",
+		id, slot_data->bus_width, slot_data->detect_pin,
+		slot_data->detect_is_active_high ? "true" : "false",
+		slot_data->wp_pin);
+
+	mmc->ops = &atmci_ops;
+	mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
+	mmc->f_max = host->bus_hz / 2;
+	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
+	if (sdio_irq)
+		mmc->caps |= MMC_CAP_SDIO_IRQ;
+	if (host->caps.has_highspeed)
+		mmc->caps |= MMC_CAP_SD_HIGHSPEED;
+	/*
+	 * Without the read/write proof capability, it is strongly suggested to
+	 * use only one bit for data to prevent fifo underruns and overruns
+	 * which will corrupt data.
+	 */
+	if ((slot_data->bus_width >= 4) && host->caps.has_rwproof)
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+	if (atmci_get_version(host) < 0x200) {
+		mmc->max_segs = 256;
+		mmc->max_blk_size = 4095;
+		mmc->max_blk_count = 256;
+		mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+		mmc->max_seg_size = mmc->max_blk_size * mmc->max_segs;
+	} else {
+		mmc->max_segs = 64;
+		mmc->max_req_size = 32768 * 512;
+		mmc->max_blk_size = 32768;
+		mmc->max_blk_count = 512;
+	}
+
+	/* Assume card is present initially */
+	set_bit(ATMCI_CARD_PRESENT, &slot->flags);
+	if (gpio_is_valid(slot->detect_pin)) {
+		if (devm_gpio_request(&host->pdev->dev, slot->detect_pin,
+				      "mmc_detect")) {
+			dev_dbg(&mmc->class_dev, "no detect pin available\n");
+			slot->detect_pin = -EBUSY;
+		} else if (gpio_get_value(slot->detect_pin) ^
+				slot->detect_is_active_high) {
+			clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
+		}
+	}
+
+	if (!gpio_is_valid(slot->detect_pin)) {
+		if (slot_data->non_removable)
+			mmc->caps |= MMC_CAP_NONREMOVABLE;
+		else
+			mmc->caps |= MMC_CAP_NEEDS_POLL;
+	}
+
+	if (gpio_is_valid(slot->wp_pin)) {
+		if (devm_gpio_request(&host->pdev->dev, slot->wp_pin,
+				      "mmc_wp")) {
+			dev_dbg(&mmc->class_dev, "no WP pin available\n");
+			slot->wp_pin = -EBUSY;
+		}
+	}
+
+	host->slot[id] = slot;
+	mmc_regulator_get_supply(mmc);
+	mmc_add_host(mmc);
+
+	if (gpio_is_valid(slot->detect_pin)) {
+		int ret;
+
+		setup_timer(&slot->detect_timer, atmci_detect_change,
+				(unsigned long)slot);
+
+		ret = request_irq(gpio_to_irq(slot->detect_pin),
+				atmci_detect_interrupt,
+				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+				"mmc-detect", slot);
+		if (ret) {
+			dev_dbg(&mmc->class_dev,
+				"could not request IRQ %d for detect pin\n",
+				gpio_to_irq(slot->detect_pin));
+			slot->detect_pin = -EBUSY;
+		}
+	}
+
+	atmci_init_debugfs(slot);
+
+	return 0;
+}
+
+static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
+		unsigned int id)
+{
+	/* Debugfs stuff is cleaned up by mmc core */
+
+	set_bit(ATMCI_SHUTDOWN, &slot->flags);
+	smp_wmb();
+
+	mmc_remove_host(slot->mmc);
+
+	if (gpio_is_valid(slot->detect_pin)) {
+		int pin = slot->detect_pin;
+
+		free_irq(gpio_to_irq(pin), slot);
+		del_timer_sync(&slot->detect_timer);
+	}
+
+	slot->host->slot[id] = NULL;
+	mmc_free_host(slot->mmc);
+}
+
+static int atmci_configure_dma(struct atmel_mci *host)
+{
+	host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev,
+							"rxtx");
+	if (IS_ERR(host->dma.chan))
+		return PTR_ERR(host->dma.chan);
+
+	dev_info(&host->pdev->dev, "using %s for DMA transfers\n",
+		 dma_chan_name(host->dma.chan));
+
+	host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
+	host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	host->dma_conf.src_maxburst = 1;
+	host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
+	host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	host->dma_conf.dst_maxburst = 1;
+	host->dma_conf.device_fc = false;
+
+	return 0;
+}
+
+/*
+ * HSMCI (High Speed MCI) module is not fully compatible with MCI module.
+ * HSMCI provides DMA support and a new config register but no more supports
+ * PDC.
+ */
+static void atmci_get_cap(struct atmel_mci *host)
+{
+	unsigned int version;
+
+	version = atmci_get_version(host);
+	dev_info(&host->pdev->dev,
+			"version: 0x%x\n", version);
+
+	host->caps.has_dma_conf_reg = 0;
+	host->caps.has_pdc = ATMCI_PDC_CONNECTED;
+	host->caps.has_cfg_reg = 0;
+	host->caps.has_cstor_reg = 0;
+	host->caps.has_highspeed = 0;
+	host->caps.has_rwproof = 0;
+	host->caps.has_odd_clk_div = 0;
+	host->caps.has_bad_data_ordering = 1;
+	host->caps.need_reset_after_xfer = 1;
+	host->caps.need_blksz_mul_4 = 1;
+	host->caps.need_notbusy_for_read_ops = 0;
+
+	/* keep only major version number */
+	switch (version & 0xf00) {
+	case 0x600:
+	case 0x500:
+		host->caps.has_odd_clk_div = 1;
+	case 0x400:
+	case 0x300:
+		host->caps.has_dma_conf_reg = 1;
+		host->caps.has_pdc = 0;
+		host->caps.has_cfg_reg = 1;
+		host->caps.has_cstor_reg = 1;
+		host->caps.has_highspeed = 1;
+	case 0x200:
+		host->caps.has_rwproof = 1;
+		host->caps.need_blksz_mul_4 = 0;
+		host->caps.need_notbusy_for_read_ops = 1;
+	case 0x100:
+		host->caps.has_bad_data_ordering = 0;
+		host->caps.need_reset_after_xfer = 0;
+	case 0x0:
+		break;
+	default:
+		host->caps.has_pdc = 0;
+		dev_warn(&host->pdev->dev,
+				"Unmanaged mci version, set minimum capabilities\n");
+		break;
+	}
+}
+
+static int atmci_probe(struct platform_device *pdev)
+{
+	struct mci_platform_data	*pdata;
+	struct atmel_mci		*host;
+	struct resource			*regs;
+	unsigned int			nr_slots;
+	int				irq;
+	int				ret, i;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		pdata = atmci_of_init(pdev);
+		if (IS_ERR(pdata)) {
+			dev_err(&pdev->dev, "platform data not available\n");
+			return PTR_ERR(pdata);
+		}
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+
+	host->pdev = pdev;
+	spin_lock_init(&host->lock);
+	INIT_LIST_HEAD(&host->queue);
+
+	host->mck = devm_clk_get(&pdev->dev, "mci_clk");
+	if (IS_ERR(host->mck))
+		return PTR_ERR(host->mck);
+
+	host->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
+	if (!host->regs)
+		return -ENOMEM;
+
+	ret = clk_prepare_enable(host->mck);
+	if (ret)
+		return ret;
+
+	atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+	host->bus_hz = clk_get_rate(host->mck);
+
+	host->mapbase = regs->start;
+
+	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host);
+
+	ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host);
+	if (ret) {
+		clk_disable_unprepare(host->mck);
+		return ret;
+	}
+
+	/* Get MCI capabilities and set operations according to it */
+	atmci_get_cap(host);
+	ret = atmci_configure_dma(host);
+	if (ret == -EPROBE_DEFER)
+		goto err_dma_probe_defer;
+	if (ret == 0) {
+		host->prepare_data = &atmci_prepare_data_dma;
+		host->submit_data = &atmci_submit_data_dma;
+		host->stop_transfer = &atmci_stop_transfer_dma;
+	} else if (host->caps.has_pdc) {
+		dev_info(&pdev->dev, "using PDC\n");
+		host->prepare_data = &atmci_prepare_data_pdc;
+		host->submit_data = &atmci_submit_data_pdc;
+		host->stop_transfer = &atmci_stop_transfer_pdc;
+	} else {
+		dev_info(&pdev->dev, "using PIO\n");
+		host->prepare_data = &atmci_prepare_data;
+		host->submit_data = &atmci_submit_data;
+		host->stop_transfer = &atmci_stop_transfer;
+	}
+
+	platform_set_drvdata(pdev, host);
+
+	setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
+
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	/* We need at least one slot to succeed */
+	nr_slots = 0;
+	ret = -ENODEV;
+	if (pdata->slot[0].bus_width) {
+		ret = atmci_init_slot(host, &pdata->slot[0],
+				0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA);
+		if (!ret) {
+			nr_slots++;
+			host->buf_size = host->slot[0]->mmc->max_req_size;
+		}
+	}
+	if (pdata->slot[1].bus_width) {
+		ret = atmci_init_slot(host, &pdata->slot[1],
+				1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB);
+		if (!ret) {
+			nr_slots++;
+			if (host->slot[1]->mmc->max_req_size > host->buf_size)
+				host->buf_size =
+					host->slot[1]->mmc->max_req_size;
+		}
+	}
+
+	if (!nr_slots) {
+		dev_err(&pdev->dev, "init failed: no slot defined\n");
+		goto err_init_slot;
+	}
+
+	if (!host->caps.has_rwproof) {
+		host->buffer = dma_alloc_coherent(&pdev->dev, host->buf_size,
+		                                  &host->buf_phys_addr,
+						  GFP_KERNEL);
+		if (!host->buffer) {
+			ret = -ENOMEM;
+			dev_err(&pdev->dev, "buffer allocation failed\n");
+			goto err_dma_alloc;
+		}
+	}
+
+	dev_info(&pdev->dev,
+			"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
+			host->mapbase, irq, nr_slots);
+
+	pm_runtime_mark_last_busy(&host->pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
+
+	return 0;
+
+err_dma_alloc:
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
+		if (host->slot[i])
+			atmci_cleanup_slot(host->slot[i], i);
+	}
+err_init_slot:
+	clk_disable_unprepare(host->mck);
+
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	del_timer_sync(&host->timer);
+	if (!IS_ERR(host->dma.chan))
+		dma_release_channel(host->dma.chan);
+err_dma_probe_defer:
+	free_irq(irq, host);
+	return ret;
+}
+
+static int atmci_remove(struct platform_device *pdev)
+{
+	struct atmel_mci	*host = platform_get_drvdata(pdev);
+	unsigned int		i;
+
+	pm_runtime_get_sync(&pdev->dev);
+
+	if (host->buffer)
+		dma_free_coherent(&pdev->dev, host->buf_size,
+		                  host->buffer, host->buf_phys_addr);
+
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
+		if (host->slot[i])
+			atmci_cleanup_slot(host->slot[i], i);
+	}
+
+	atmci_writel(host, ATMCI_IDR, ~0UL);
+	atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
+	atmci_readl(host, ATMCI_SR);
+
+	del_timer_sync(&host->timer);
+	if (!IS_ERR(host->dma.chan))
+		dma_release_channel(host->dma.chan);
+
+	free_irq(platform_get_irq(pdev, 0), host);
+
+	clk_disable_unprepare(host->mck);
+
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int atmci_runtime_suspend(struct device *dev)
+{
+	struct atmel_mci *host = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(host->mck);
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int atmci_runtime_resume(struct device *dev)
+{
+	struct atmel_mci *host = dev_get_drvdata(dev);
+
+	pinctrl_pm_select_default_state(dev);
+
+	return clk_prepare_enable(host->mck);
+}
+#endif
+
+static const struct dev_pm_ops atmci_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(atmci_runtime_suspend, atmci_runtime_resume, NULL)
+};
+
+static struct platform_driver atmci_driver = {
+	.probe		= atmci_probe,
+	.remove		= atmci_remove,
+	.driver		= {
+		.name		= "atmel_mci",
+		.of_match_table	= of_match_ptr(atmci_dt_ids),
+		.pm		= &atmci_dev_pm_ops,
+	},
+};
+module_platform_driver(atmci_driver);
+
+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
+MODULE_LICENSE("GPL v2");