Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

18 files changed, 9508 insertions, 0 deletions

diff --git a/kernel/drivers/iio/accel/Kconfig b/kernel/drivers/iio/accel/Kconfig
new file mode 100644
index 000000000..7c9a9a94a
--- /dev/null
+++ b/kernel/drivers/iio/accel/Kconfig
@@ -0,0 +1,139 @@
+#
+# Accelerometer drivers
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Accelerometers"
+
+config BMA180
+	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build a driver for the Bosch BMA180 or
+	  BMA250 triaxial acceleration sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bma180.
+
+config BMC150_ACCEL
+	tristate "Bosch BMC150 Accelerometer Driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for the following Bosch accelerometers:
+	  BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
+
+	  Currently this only supports the device via an i2c interface.
+
+	  This is a combo module with both accelerometer and magnetometer.
+	  This driver is only implementing accelerometer part, which has
+	  its own address and register map.
+
+config HID_SENSOR_ACCEL_3D
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
+	tristate "HID Accelerometers 3D"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  accelerometers 3D.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hid-sensor-accel-3d.
+
+config IIO_ST_ACCEL_3AXIS
+	tristate "STMicroelectronics accelerometers 3-Axis Driver"
+	depends on (I2C || SPI_MASTER) && SYSFS
+	select IIO_ST_SENSORS_CORE
+	select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
+	select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
+	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+	help
+	  Say yes here to build support for STMicroelectronics accelerometers:
+	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+	  LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+
+	  This driver can also be built as a module. If so, these modules
+	  will be created:
+	  - st_accel (core functions for the driver [it is mandatory]);
+	  - st_accel_i2c (necessary for the I2C devices [optional*]);
+	  - st_accel_spi (necessary for the SPI devices [optional*]);
+
+	  (*) one of these is necessary to do something.
+
+config IIO_ST_ACCEL_I2C_3AXIS
+	tristate
+	depends on IIO_ST_ACCEL_3AXIS
+	depends on IIO_ST_SENSORS_I2C
+
+config IIO_ST_ACCEL_SPI_3AXIS
+	tristate
+	depends on IIO_ST_ACCEL_3AXIS
+	depends on IIO_ST_SENSORS_SPI
+
+config KXSD9
+	tristate "Kionix KXSD9 Accelerometer Driver"
+	depends on SPI
+	help
+	  Say yes here to build support for the Kionix KXSD9 accelerometer.
+	  Currently this only supports the device via an SPI interface.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called kxsd9.
+
+config MMA8452
+	tristate "Freescale MMA8452Q Accelerometer Driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for the Freescale MMA8452Q 3-axis
+	  accelerometer.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mma8452.
+
+config KXCJK1013
+	tristate "Kionix 3-Axis Accelerometer Driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build a driver for the Kionix KXCJK-1013
+	  triaxial acceleration sensor. This driver also supports KXCJ9-1008
+	  and KXTJ2-1009.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called kxcjk-1013.
+
+config MMA9551_CORE
+	tristate
+
+config MMA9551
+	tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
+	depends on I2C
+	select MMA9551_CORE
+
+	help
+	  Say yes here to build support for the Freescale MMA9551L
+	  Intelligent Motion-Sensing Platform Driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mma9551.
+
+config MMA9553
+	tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
+	depends on I2C
+	select MMA9551_CORE
+	help
+	  Say yes here to build support for the Freescale MMA9553L
+	  Intelligent Pedometer Platform Driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mma9553.
+endmenu
diff --git a/kernel/drivers/iio/accel/Makefile b/kernel/drivers/iio/accel/Makefile
new file mode 100644
index 000000000..99d89e46c
--- /dev/null
+++ b/kernel/drivers/iio/accel/Makefile
@@ -0,0 +1,24 @@
+#
+# Makefile for industrial I/O accelerometer drivers
+#
+
+# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_BMA180) += bma180.o
+obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel.o
+obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
+obj-$(CONFIG_KXSD9)	+= kxsd9.o
+obj-$(CONFIG_MMA8452)	+= mma8452.o
+
+obj-$(CONFIG_MMA9551_CORE)	+= mma9551_core.o
+obj-$(CONFIG_MMA9551)		+= mma9551.o
+obj-$(CONFIG_MMA9553)		+= mma9553.o
+
+obj-$(CONFIG_IIO_SSP_SENSORS_COMMONS) += ssp_accel_sensor.o
+
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
+st_accel-y := st_accel_core.o
+st_accel-$(CONFIG_IIO_BUFFER) += st_accel_buffer.o
+
+obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o
+obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o
diff --git a/kernel/drivers/iio/accel/bma180.c b/kernel/drivers/iio/accel/bma180.c
new file mode 100644
index 000000000..75c6d2103
--- /dev/null
+++ b/kernel/drivers/iio/accel/bma180.c
@@ -0,0 +1,862 @@
+/*
+ * bma180.c - IIO driver for Bosch BMA180 triaxial acceleration sensor
+ *
+ * Copyright 2013 Oleksandr Kravchenko <x0199363@ti.com>
+ *
+ * Support for BMA250 (c) Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * SPI is not supported by driver
+ * BMA180: 7-bit I2C slave address 0x40 or 0x41
+ * BMA250: 7-bit I2C slave address 0x18 or 0x19
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define BMA180_DRV_NAME "bma180"
+#define BMA180_IRQ_NAME "bma180_event"
+
+enum {
+	BMA180,
+	BMA250,
+};
+
+struct bma180_data;
+
+struct bma180_part_info {
+	const struct iio_chan_spec *channels;
+	unsigned num_channels;
+	const int *scale_table;
+	unsigned num_scales;
+	const int *bw_table;
+	unsigned num_bw;
+
+	u8 int_reset_reg, int_reset_mask;
+	u8 sleep_reg, sleep_mask;
+	u8 bw_reg, bw_mask;
+	u8 scale_reg, scale_mask;
+	u8 power_reg, power_mask, lowpower_val;
+	u8 int_enable_reg, int_enable_mask;
+	u8 softreset_reg;
+
+	int (*chip_config)(struct bma180_data *data);
+	void (*chip_disable)(struct bma180_data *data);
+};
+
+/* Register set */
+#define BMA180_CHIP_ID		0x00 /* Need to distinguish BMA180 from other */
+#define BMA180_ACC_X_LSB	0x02 /* First of 6 registers of accel data */
+#define BMA180_TEMP		0x08
+#define BMA180_CTRL_REG0	0x0d
+#define BMA180_RESET		0x10
+#define BMA180_BW_TCS		0x20
+#define BMA180_CTRL_REG3	0x21
+#define BMA180_TCO_Z		0x30
+#define BMA180_OFFSET_LSB1	0x35
+
+/* BMA180_CTRL_REG0 bits */
+#define BMA180_DIS_WAKE_UP	BIT(0) /* Disable wake up mode */
+#define BMA180_SLEEP		BIT(1) /* 1 - chip will sleep */
+#define BMA180_EE_W		BIT(4) /* Unlock writing to addr from 0x20 */
+#define BMA180_RESET_INT	BIT(6) /* Reset pending interrupts */
+
+/* BMA180_CTRL_REG3 bits */
+#define BMA180_NEW_DATA_INT	BIT(1) /* Intr every new accel data is ready */
+
+/* BMA180_OFFSET_LSB1 skipping mode bit */
+#define BMA180_SMP_SKIP		BIT(0)
+
+/* Bit masks for registers bit fields */
+#define BMA180_RANGE		0x0e /* Range of measured accel values */
+#define BMA180_BW		0xf0 /* Accel bandwidth */
+#define BMA180_MODE_CONFIG	0x03 /* Config operation modes */
+
+/* We have to write this value in reset register to do soft reset */
+#define BMA180_RESET_VAL	0xb6
+
+#define BMA180_ID_REG_VAL	0x03
+
+/* Chip power modes */
+#define BMA180_LOW_POWER	0x03
+
+#define BMA250_RANGE_REG	0x0f
+#define BMA250_BW_REG		0x10
+#define BMA250_POWER_REG	0x11
+#define BMA250_RESET_REG	0x14
+#define BMA250_INT_ENABLE_REG	0x17
+#define BMA250_INT_MAP_REG	0x1a
+#define BMA250_INT_RESET_REG	0x21
+
+#define BMA250_RANGE_MASK	GENMASK(3, 0) /* Range of accel values */
+#define BMA250_BW_MASK		GENMASK(4, 0) /* Accel bandwidth */
+#define BMA250_SUSPEND_MASK	BIT(7) /* chip will sleep */
+#define BMA250_LOWPOWER_MASK	BIT(6)
+#define BMA250_DATA_INTEN_MASK	BIT(4)
+#define BMA250_INT1_DATA_MASK	BIT(0)
+#define BMA250_INT_RESET_MASK	BIT(7) /* Reset pending interrupts */
+
+struct bma180_data {
+	struct i2c_client *client;
+	struct iio_trigger *trig;
+	const struct bma180_part_info *part_info;
+	struct mutex mutex;
+	bool sleep_state;
+	int scale;
+	int bw;
+	bool pmode;
+	u8 buff[16]; /* 3x 16-bit + 8-bit + padding + timestamp */
+};
+
+enum bma180_chan {
+	AXIS_X,
+	AXIS_Y,
+	AXIS_Z,
+	TEMP
+};
+
+static int bma180_bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */
+static int bma180_scale_table[] = { 1275, 1863, 2452, 3727, 4903, 9709, 19417 };
+
+static int bma250_bw_table[] = { 8, 16, 31, 63, 125, 250 }; /* Hz */
+static int bma250_scale_table[] = { 0, 0, 0, 38344, 0, 76590, 0, 0, 153180, 0,
+	0, 0, 306458 };
+
+static int bma180_get_data_reg(struct bma180_data *data, enum bma180_chan chan)
+{
+	int ret;
+
+	if (data->sleep_state)
+		return -EBUSY;
+
+	switch (chan) {
+	case TEMP:
+		ret = i2c_smbus_read_byte_data(data->client, BMA180_TEMP);
+		if (ret < 0)
+			dev_err(&data->client->dev, "failed to read temp register\n");
+		break;
+	default:
+		ret = i2c_smbus_read_word_data(data->client,
+			BMA180_ACC_X_LSB + chan * 2);
+		if (ret < 0)
+			dev_err(&data->client->dev,
+				"failed to read accel_%c register\n",
+				'x' + chan);
+	}
+
+	return ret;
+}
+
+static int bma180_set_bits(struct bma180_data *data, u8 reg, u8 mask, u8 val)
+{
+	int ret = i2c_smbus_read_byte_data(data->client, reg);
+	u8 reg_val = (ret & ~mask) | (val << (ffs(mask) - 1));
+
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_write_byte_data(data->client, reg, reg_val);
+}
+
+static int bma180_reset_intr(struct bma180_data *data)
+{
+	int ret = bma180_set_bits(data, data->part_info->int_reset_reg,
+		data->part_info->int_reset_mask, 1);
+
+	if (ret)
+		dev_err(&data->client->dev, "failed to reset interrupt\n");
+
+	return ret;
+}
+
+static int bma180_set_new_data_intr_state(struct bma180_data *data, bool state)
+{
+	int ret = bma180_set_bits(data, data->part_info->int_enable_reg,
+			data->part_info->int_enable_mask, state);
+	if (ret)
+		goto err;
+	ret = bma180_reset_intr(data);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	dev_err(&data->client->dev,
+		"failed to set new data interrupt state %d\n", state);
+	return ret;
+}
+
+static int bma180_set_sleep_state(struct bma180_data *data, bool state)
+{
+	int ret = bma180_set_bits(data, data->part_info->sleep_reg,
+		data->part_info->sleep_mask, state);
+
+	if (ret) {
+		dev_err(&data->client->dev,
+			"failed to set sleep state %d\n", state);
+		return ret;
+	}
+	data->sleep_state = state;
+
+	return 0;
+}
+
+static int bma180_set_ee_writing_state(struct bma180_data *data, bool state)
+{
+	int ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_EE_W, state);
+
+	if (ret)
+		dev_err(&data->client->dev,
+			"failed to set ee writing state %d\n", state);
+
+	return ret;
+}
+
+static int bma180_set_bw(struct bma180_data *data, int val)
+{
+	int ret, i;
+
+	if (data->sleep_state)
+		return -EBUSY;
+
+	for (i = 0; i < data->part_info->num_bw; ++i) {
+		if (data->part_info->bw_table[i] == val) {
+			ret = bma180_set_bits(data, data->part_info->bw_reg,
+				data->part_info->bw_mask, i);
+			if (ret) {
+				dev_err(&data->client->dev,
+					"failed to set bandwidth\n");
+				return ret;
+			}
+			data->bw = val;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int bma180_set_scale(struct bma180_data *data, int val)
+{
+	int ret, i;
+
+	if (data->sleep_state)
+		return -EBUSY;
+
+	for (i = 0; i < data->part_info->num_scales; ++i)
+		if (data->part_info->scale_table[i] == val) {
+			ret = bma180_set_bits(data, data->part_info->scale_reg,
+				data->part_info->scale_mask, i);
+			if (ret) {
+				dev_err(&data->client->dev,
+					"failed to set scale\n");
+				return ret;
+			}
+			data->scale = val;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+static int bma180_set_pmode(struct bma180_data *data, bool mode)
+{
+	u8 reg_val = mode ? data->part_info->lowpower_val : 0;
+	int ret = bma180_set_bits(data, data->part_info->power_reg,
+		data->part_info->power_mask, reg_val);
+
+	if (ret) {
+		dev_err(&data->client->dev, "failed to set power mode\n");
+		return ret;
+	}
+	data->pmode = mode;
+
+	return 0;
+}
+
+static int bma180_soft_reset(struct bma180_data *data)
+{
+	int ret = i2c_smbus_write_byte_data(data->client,
+		data->part_info->softreset_reg, BMA180_RESET_VAL);
+
+	if (ret)
+		dev_err(&data->client->dev, "failed to reset the chip\n");
+
+	return ret;
+}
+
+static int bma180_chip_init(struct bma180_data *data)
+{
+	/* Try to read chip_id register. It must return 0x03. */
+	int ret = i2c_smbus_read_byte_data(data->client, BMA180_CHIP_ID);
+
+	if (ret < 0)
+		return ret;
+	if (ret != BMA180_ID_REG_VAL)
+		return -ENODEV;
+
+	ret = bma180_soft_reset(data);
+	if (ret)
+		return ret;
+	/*
+	 * No serial transaction should occur within minimum 10 us
+	 * after soft_reset command
+	 */
+	msleep(20);
+
+	ret = bma180_set_new_data_intr_state(data, false);
+	if (ret)
+		return ret;
+
+	return bma180_set_pmode(data, false);
+}
+
+static int bma180_chip_config(struct bma180_data *data)
+{
+	int ret = bma180_chip_init(data);
+
+	if (ret)
+		goto err;
+	ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_DIS_WAKE_UP, 1);
+	if (ret)
+		goto err;
+	ret = bma180_set_ee_writing_state(data, true);
+	if (ret)
+		goto err;
+	ret = bma180_set_bits(data, BMA180_OFFSET_LSB1, BMA180_SMP_SKIP, 1);
+	if (ret)
+		goto err;
+	ret = bma180_set_bw(data, 20); /* 20 Hz */
+	if (ret)
+		goto err;
+	ret = bma180_set_scale(data, 2452); /* 2 G */
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	dev_err(&data->client->dev, "failed to config the chip\n");
+	return ret;
+}
+
+static int bma250_chip_config(struct bma180_data *data)
+{
+	int ret = bma180_chip_init(data);
+
+	if (ret)
+		goto err;
+	ret = bma180_set_bw(data, 16); /* 16 Hz */
+	if (ret)
+		goto err;
+	ret = bma180_set_scale(data, 38344); /* 2 G */
+	if (ret)
+		goto err;
+	ret = bma180_set_bits(data, BMA250_INT_MAP_REG,
+		BMA250_INT1_DATA_MASK, 1);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	dev_err(&data->client->dev, "failed to config the chip\n");
+	return ret;
+}
+
+static void bma180_chip_disable(struct bma180_data *data)
+{
+	if (bma180_set_new_data_intr_state(data, false))
+		goto err;
+	if (bma180_set_ee_writing_state(data, false))
+		goto err;
+	if (bma180_set_sleep_state(data, true))
+		goto err;
+
+	return;
+
+err:
+	dev_err(&data->client->dev, "failed to disable the chip\n");
+}
+
+static void bma250_chip_disable(struct bma180_data *data)
+{
+	if (bma180_set_new_data_intr_state(data, false))
+		goto err;
+	if (bma180_set_sleep_state(data, true))
+		goto err;
+
+	return;
+
+err:
+	dev_err(&data->client->dev, "failed to disable the chip\n");
+}
+
+static ssize_t bma180_show_avail(char *buf, const int *vals, unsigned n,
+				 bool micros)
+{
+	size_t len = 0;
+	int i;
+
+	for (i = 0; i < n; i++) {
+		if (!vals[i])
+			continue;
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+			micros ? "0.%06d " : "%d ", vals[i]);
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t bma180_show_filter_freq_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct bma180_data *data = iio_priv(dev_to_iio_dev(dev));
+
+	return bma180_show_avail(buf, data->part_info->bw_table,
+		data->part_info->num_bw, false);
+}
+
+static ssize_t bma180_show_scale_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct bma180_data *data = iio_priv(dev_to_iio_dev(dev));
+
+	return bma180_show_avail(buf, data->part_info->scale_table,
+		data->part_info->num_scales, true);
+}
+
+static IIO_DEVICE_ATTR(in_accel_filter_low_pass_3db_frequency_available,
+	S_IRUGO, bma180_show_filter_freq_avail, NULL, 0);
+
+static IIO_DEVICE_ATTR(in_accel_scale_available,
+	S_IRUGO, bma180_show_scale_avail, NULL, 0);
+
+static struct attribute *bma180_attributes[] = {
+	&iio_dev_attr_in_accel_filter_low_pass_3db_frequency_available.
+		dev_attr.attr,
+	&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group bma180_attrs_group = {
+	.attrs = bma180_attributes,
+};
+
+static int bma180_read_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *chan, int *val, int *val2,
+		long mask)
+{
+	struct bma180_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->mutex);
+		if (iio_buffer_enabled(indio_dev)) {
+			mutex_unlock(&data->mutex);
+			return -EBUSY;
+		}
+		ret = bma180_get_data_reg(data, chan->scan_index);
+		mutex_unlock(&data->mutex);
+		if (ret < 0)
+			return ret;
+		*val = sign_extend32(ret >> chan->scan_type.shift,
+			chan->scan_type.realbits - 1);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		*val = data->bw;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			*val = 0;
+			*val2 = data->scale;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_TEMP:
+			*val = 500;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		*val = 48; /* 0 LSB @ 24 degree C */
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bma180_write_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+	struct bma180_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		if (val)
+			return -EINVAL;
+		mutex_lock(&data->mutex);
+		ret = bma180_set_scale(data, val2);
+		mutex_unlock(&data->mutex);
+		return ret;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		if (val2)
+			return -EINVAL;
+		mutex_lock(&data->mutex);
+		ret = bma180_set_bw(data, val);
+		mutex_unlock(&data->mutex);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info bma180_info = {
+	.attrs			= &bma180_attrs_group,
+	.read_raw		= bma180_read_raw,
+	.write_raw		= bma180_write_raw,
+	.driver_module		= THIS_MODULE,
+};
+
+static const char * const bma180_power_modes[] = { "low_noise", "low_power" };
+
+static int bma180_get_power_mode(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan)
+{
+	struct bma180_data *data = iio_priv(indio_dev);
+
+	return data->pmode;
+}
+
+static int bma180_set_power_mode(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan, unsigned int mode)
+{
+	struct bma180_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = bma180_set_pmode(data, mode);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static const struct iio_enum bma180_power_mode_enum = {
+	.items = bma180_power_modes,
+	.num_items = ARRAY_SIZE(bma180_power_modes),
+	.get = bma180_get_power_mode,
+	.set = bma180_set_power_mode,
+};
+
+static const struct iio_chan_spec_ext_info bma180_ext_info[] = {
+	IIO_ENUM("power_mode", true, &bma180_power_mode_enum),
+	IIO_ENUM_AVAILABLE("power_mode", &bma180_power_mode_enum),
+	{ },
+};
+
+#define BMA180_ACC_CHANNEL(_axis, _bits) {				\
+	.type = IIO_ACCEL,						\
+	.modified = 1,							\
+	.channel2 = IIO_MOD_##_axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
+		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),	\
+	.scan_index = AXIS_##_axis,					\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = _bits,					\
+		.storagebits = 16,					\
+		.shift = 16 - _bits,					\
+	},								\
+	.ext_info = bma180_ext_info,					\
+}
+
+#define BMA180_TEMP_CHANNEL {						\
+	.type = IIO_TEMP,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),	\
+	.scan_index = TEMP,						\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 8,						\
+		.storagebits = 16,					\
+	},								\
+}
+
+static const struct iio_chan_spec bma180_channels[] = {
+	BMA180_ACC_CHANNEL(X, 14),
+	BMA180_ACC_CHANNEL(Y, 14),
+	BMA180_ACC_CHANNEL(Z, 14),
+	BMA180_TEMP_CHANNEL,
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static const struct iio_chan_spec bma250_channels[] = {
+	BMA180_ACC_CHANNEL(X, 10),
+	BMA180_ACC_CHANNEL(Y, 10),
+	BMA180_ACC_CHANNEL(Z, 10),
+	BMA180_TEMP_CHANNEL,
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static const struct bma180_part_info bma180_part_info[] = {
+	[BMA180] = {
+		bma180_channels, ARRAY_SIZE(bma180_channels),
+		bma180_scale_table, ARRAY_SIZE(bma180_scale_table),
+		bma180_bw_table, ARRAY_SIZE(bma180_bw_table),
+		BMA180_CTRL_REG0, BMA180_RESET_INT,
+		BMA180_CTRL_REG0, BMA180_SLEEP,
+		BMA180_BW_TCS, BMA180_BW,
+		BMA180_OFFSET_LSB1, BMA180_RANGE,
+		BMA180_TCO_Z, BMA180_MODE_CONFIG, BMA180_LOW_POWER,
+		BMA180_CTRL_REG3, BMA180_NEW_DATA_INT,
+		BMA180_RESET,
+		bma180_chip_config,
+		bma180_chip_disable,
+	},
+	[BMA250] = {
+		bma250_channels, ARRAY_SIZE(bma250_channels),
+		bma250_scale_table, ARRAY_SIZE(bma250_scale_table),
+		bma250_bw_table, ARRAY_SIZE(bma250_bw_table),
+		BMA250_INT_RESET_REG, BMA250_INT_RESET_MASK,
+		BMA250_POWER_REG, BMA250_SUSPEND_MASK,
+		BMA250_BW_REG, BMA250_BW_MASK,
+		BMA250_RANGE_REG, BMA250_RANGE_MASK,
+		BMA250_POWER_REG, BMA250_LOWPOWER_MASK, 1,
+		BMA250_INT_ENABLE_REG, BMA250_DATA_INTEN_MASK,
+		BMA250_RESET_REG,
+		bma250_chip_config,
+		bma250_chip_disable,
+	},
+};
+
+static irqreturn_t bma180_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct bma180_data *data = iio_priv(indio_dev);
+	int64_t time_ns = iio_get_time_ns();
+	int bit, ret, i = 0;
+
+	mutex_lock(&data->mutex);
+
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		ret = bma180_get_data_reg(data, bit);
+		if (ret < 0) {
+			mutex_unlock(&data->mutex);
+			goto err;
+		}
+		((s16 *)data->buff)[i++] = ret;
+	}
+
+	mutex_unlock(&data->mutex);
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buff, time_ns);
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int bma180_data_rdy_trigger_set_state(struct iio_trigger *trig,
+		bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct bma180_data *data = iio_priv(indio_dev);
+
+	return bma180_set_new_data_intr_state(data, state);
+}
+
+static int bma180_trig_try_reen(struct iio_trigger *trig)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct bma180_data *data = iio_priv(indio_dev);
+
+	return bma180_reset_intr(data);
+}
+
+static const struct iio_trigger_ops bma180_trigger_ops = {
+	.set_trigger_state = bma180_data_rdy_trigger_set_state,
+	.try_reenable = bma180_trig_try_reen,
+	.owner = THIS_MODULE,
+};
+
+static int bma180_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct bma180_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	data->part_info = &bma180_part_info[id->driver_data];
+
+	ret = data->part_info->chip_config(data);
+	if (ret < 0)
+		goto err_chip_disable;
+
+	mutex_init(&data->mutex);
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = data->part_info->channels;
+	indio_dev->num_channels = data->part_info->num_channels;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &bma180_info;
+
+	if (client->irq > 0) {
+		data->trig = iio_trigger_alloc("%s-dev%d", indio_dev->name,
+			indio_dev->id);
+		if (!data->trig) {
+			ret = -ENOMEM;
+			goto err_chip_disable;
+		}
+
+		ret = devm_request_irq(&client->dev, client->irq,
+			iio_trigger_generic_data_rdy_poll, IRQF_TRIGGER_RISING,
+			"bma180_event", data->trig);
+		if (ret) {
+			dev_err(&client->dev, "unable to request IRQ\n");
+			goto err_trigger_free;
+		}
+
+		data->trig->dev.parent = &client->dev;
+		data->trig->ops = &bma180_trigger_ops;
+		iio_trigger_set_drvdata(data->trig, indio_dev);
+		indio_dev->trig = iio_trigger_get(data->trig);
+
+		ret = iio_trigger_register(data->trig);
+		if (ret)
+			goto err_trigger_free;
+	}
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+			bma180_trigger_handler, NULL);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to setup iio triggered buffer\n");
+		goto err_trigger_unregister;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to register iio device\n");
+		goto err_buffer_cleanup;
+	}
+
+	return 0;
+
+err_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+err_trigger_unregister:
+	if (data->trig)
+		iio_trigger_unregister(data->trig);
+err_trigger_free:
+	iio_trigger_free(data->trig);
+err_chip_disable:
+	data->part_info->chip_disable(data);
+
+	return ret;
+}
+
+static int bma180_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct bma180_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	if (data->trig) {
+		iio_trigger_unregister(data->trig);
+		iio_trigger_free(data->trig);
+	}
+
+	mutex_lock(&data->mutex);
+	data->part_info->chip_disable(data);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bma180_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct bma180_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = bma180_set_sleep_state(data, true);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int bma180_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct bma180_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = bma180_set_sleep_state(data, false);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
+#define BMA180_PM_OPS (&bma180_pm_ops)
+#else
+#define BMA180_PM_OPS NULL
+#endif
+
+static struct i2c_device_id bma180_ids[] = {
+	{ "bma180", BMA180 },
+	{ "bma250", BMA250 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, bma180_ids);
+
+static struct i2c_driver bma180_driver = {
+	.driver = {
+		.name	= "bma180",
+		.owner	= THIS_MODULE,
+		.pm	= BMA180_PM_OPS,
+	},
+	.probe		= bma180_probe,
+	.remove		= bma180_remove,
+	.id_table	= bma180_ids,
+};
+
+module_i2c_driver(bma180_driver);
+
+MODULE_AUTHOR("Kravchenko Oleksandr <x0199363@ti.com>");
+MODULE_AUTHOR("Texas Instruments, Inc.");
+MODULE_DESCRIPTION("Bosch BMA180/BMA250 triaxial acceleration sensor");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/iio/accel/bmc150-accel.c b/kernel/drivers/iio/accel/bmc150-accel.c
new file mode 100644
index 000000000..73e87739d
--- /dev/null
+++ b/kernel/drivers/iio/accel/bmc150-accel.c
@@ -0,0 +1,1853 @@
+/*
+ * 3-axis accelerometer driver supporting following Bosch-Sensortec chips:
+ *  - BMC150
+ *  - BMI055
+ *  - BMA255
+ *  - BMA250E
+ *  - BMA222E
+ *  - BMA280
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define BMC150_ACCEL_DRV_NAME			"bmc150_accel"
+#define BMC150_ACCEL_IRQ_NAME			"bmc150_accel_event"
+#define BMC150_ACCEL_GPIO_NAME			"bmc150_accel_int"
+
+#define BMC150_ACCEL_REG_CHIP_ID		0x00
+
+#define BMC150_ACCEL_REG_INT_STATUS_2		0x0B
+#define BMC150_ACCEL_ANY_MOTION_MASK		0x07
+#define BMC150_ACCEL_ANY_MOTION_BIT_X		BIT(0)
+#define BMC150_ACCEL_ANY_MOTION_BIT_Y		BIT(1)
+#define BMC150_ACCEL_ANY_MOTION_BIT_Z		BIT(2)
+#define BMC150_ACCEL_ANY_MOTION_BIT_SIGN	BIT(3)
+
+#define BMC150_ACCEL_REG_PMU_LPW		0x11
+#define BMC150_ACCEL_PMU_MODE_MASK		0xE0
+#define BMC150_ACCEL_PMU_MODE_SHIFT		5
+#define BMC150_ACCEL_PMU_BIT_SLEEP_DUR_MASK	0x17
+#define BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT	1
+
+#define BMC150_ACCEL_REG_PMU_RANGE		0x0F
+
+#define BMC150_ACCEL_DEF_RANGE_2G		0x03
+#define BMC150_ACCEL_DEF_RANGE_4G		0x05
+#define BMC150_ACCEL_DEF_RANGE_8G		0x08
+#define BMC150_ACCEL_DEF_RANGE_16G		0x0C
+
+/* Default BW: 125Hz */
+#define BMC150_ACCEL_REG_PMU_BW		0x10
+#define BMC150_ACCEL_DEF_BW			125
+
+#define BMC150_ACCEL_REG_INT_MAP_0		0x19
+#define BMC150_ACCEL_INT_MAP_0_BIT_SLOPE	BIT(2)
+
+#define BMC150_ACCEL_REG_INT_MAP_1		0x1A
+#define BMC150_ACCEL_INT_MAP_1_BIT_DATA		BIT(0)
+#define BMC150_ACCEL_INT_MAP_1_BIT_FWM		BIT(1)
+#define BMC150_ACCEL_INT_MAP_1_BIT_FFULL	BIT(2)
+
+#define BMC150_ACCEL_REG_INT_RST_LATCH		0x21
+#define BMC150_ACCEL_INT_MODE_LATCH_RESET	0x80
+#define BMC150_ACCEL_INT_MODE_LATCH_INT	0x0F
+#define BMC150_ACCEL_INT_MODE_NON_LATCH_INT	0x00
+
+#define BMC150_ACCEL_REG_INT_EN_0		0x16
+#define BMC150_ACCEL_INT_EN_BIT_SLP_X		BIT(0)
+#define BMC150_ACCEL_INT_EN_BIT_SLP_Y		BIT(1)
+#define BMC150_ACCEL_INT_EN_BIT_SLP_Z		BIT(2)
+
+#define BMC150_ACCEL_REG_INT_EN_1		0x17
+#define BMC150_ACCEL_INT_EN_BIT_DATA_EN		BIT(4)
+#define BMC150_ACCEL_INT_EN_BIT_FFULL_EN	BIT(5)
+#define BMC150_ACCEL_INT_EN_BIT_FWM_EN		BIT(6)
+
+#define BMC150_ACCEL_REG_INT_OUT_CTRL		0x20
+#define BMC150_ACCEL_INT_OUT_CTRL_INT1_LVL	BIT(0)
+
+#define BMC150_ACCEL_REG_INT_5			0x27
+#define BMC150_ACCEL_SLOPE_DUR_MASK		0x03
+
+#define BMC150_ACCEL_REG_INT_6			0x28
+#define BMC150_ACCEL_SLOPE_THRES_MASK		0xFF
+
+/* Slope duration in terms of number of samples */
+#define BMC150_ACCEL_DEF_SLOPE_DURATION		1
+/* in terms of multiples of g's/LSB, based on range */
+#define BMC150_ACCEL_DEF_SLOPE_THRESHOLD	1
+
+#define BMC150_ACCEL_REG_XOUT_L		0x02
+
+#define BMC150_ACCEL_MAX_STARTUP_TIME_MS	100
+
+/* Sleep Duration values */
+#define BMC150_ACCEL_SLEEP_500_MICRO		0x05
+#define BMC150_ACCEL_SLEEP_1_MS		0x06
+#define BMC150_ACCEL_SLEEP_2_MS		0x07
+#define BMC150_ACCEL_SLEEP_4_MS		0x08
+#define BMC150_ACCEL_SLEEP_6_MS		0x09
+#define BMC150_ACCEL_SLEEP_10_MS		0x0A
+#define BMC150_ACCEL_SLEEP_25_MS		0x0B
+#define BMC150_ACCEL_SLEEP_50_MS		0x0C
+#define BMC150_ACCEL_SLEEP_100_MS		0x0D
+#define BMC150_ACCEL_SLEEP_500_MS		0x0E
+#define BMC150_ACCEL_SLEEP_1_SEC		0x0F
+
+#define BMC150_ACCEL_REG_TEMP			0x08
+#define BMC150_ACCEL_TEMP_CENTER_VAL		24
+
+#define BMC150_ACCEL_AXIS_TO_REG(axis)	(BMC150_ACCEL_REG_XOUT_L + (axis * 2))
+#define BMC150_AUTO_SUSPEND_DELAY_MS		2000
+
+#define BMC150_ACCEL_REG_FIFO_STATUS		0x0E
+#define BMC150_ACCEL_REG_FIFO_CONFIG0		0x30
+#define BMC150_ACCEL_REG_FIFO_CONFIG1		0x3E
+#define BMC150_ACCEL_REG_FIFO_DATA		0x3F
+#define BMC150_ACCEL_FIFO_LENGTH		32
+
+enum bmc150_accel_axis {
+	AXIS_X,
+	AXIS_Y,
+	AXIS_Z,
+};
+
+enum bmc150_power_modes {
+	BMC150_ACCEL_SLEEP_MODE_NORMAL,
+	BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND,
+	BMC150_ACCEL_SLEEP_MODE_LPM,
+	BMC150_ACCEL_SLEEP_MODE_SUSPEND = 0x04,
+};
+
+struct bmc150_scale_info {
+	int scale;
+	u8 reg_range;
+};
+
+struct bmc150_accel_chip_info {
+	u8 chip_id;
+	const struct iio_chan_spec *channels;
+	int num_channels;
+	const struct bmc150_scale_info scale_table[4];
+};
+
+struct bmc150_accel_interrupt {
+	const struct bmc150_accel_interrupt_info *info;
+	atomic_t users;
+};
+
+struct bmc150_accel_trigger {
+	struct bmc150_accel_data *data;
+	struct iio_trigger *indio_trig;
+	int (*setup)(struct bmc150_accel_trigger *t, bool state);
+	int intr;
+	bool enabled;
+};
+
+enum bmc150_accel_interrupt_id {
+	BMC150_ACCEL_INT_DATA_READY,
+	BMC150_ACCEL_INT_ANY_MOTION,
+	BMC150_ACCEL_INT_WATERMARK,
+	BMC150_ACCEL_INTERRUPTS,
+};
+
+enum bmc150_accel_trigger_id {
+	BMC150_ACCEL_TRIGGER_DATA_READY,
+	BMC150_ACCEL_TRIGGER_ANY_MOTION,
+	BMC150_ACCEL_TRIGGERS,
+};
+
+struct bmc150_accel_data {
+	struct i2c_client *client;
+	struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
+	atomic_t active_intr;
+	struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
+	struct mutex mutex;
+	u8 fifo_mode, watermark;
+	s16 buffer[8];
+	u8 bw_bits;
+	u32 slope_dur;
+	u32 slope_thres;
+	u32 range;
+	int ev_enable_state;
+	int64_t timestamp, old_timestamp;
+	const struct bmc150_accel_chip_info *chip_info;
+};
+
+static const struct {
+	int val;
+	int val2;
+	u8 bw_bits;
+} bmc150_accel_samp_freq_table[] = { {15, 620000, 0x08},
+				     {31, 260000, 0x09},
+				     {62, 500000, 0x0A},
+				     {125, 0, 0x0B},
+				     {250, 0, 0x0C},
+				     {500, 0, 0x0D},
+				     {1000, 0, 0x0E},
+				     {2000, 0, 0x0F} };
+
+static const struct {
+	int bw_bits;
+	int msec;
+} bmc150_accel_sample_upd_time[] = { {0x08, 64},
+				     {0x09, 32},
+				     {0x0A, 16},
+				     {0x0B, 8},
+				     {0x0C, 4},
+				     {0x0D, 2},
+				     {0x0E, 1},
+				     {0x0F, 1} };
+
+static const struct {
+	int sleep_dur;
+	u8 reg_value;
+} bmc150_accel_sleep_value_table[] = { {0, 0},
+				       {500, BMC150_ACCEL_SLEEP_500_MICRO},
+				       {1000, BMC150_ACCEL_SLEEP_1_MS},
+				       {2000, BMC150_ACCEL_SLEEP_2_MS},
+				       {4000, BMC150_ACCEL_SLEEP_4_MS},
+				       {6000, BMC150_ACCEL_SLEEP_6_MS},
+				       {10000, BMC150_ACCEL_SLEEP_10_MS},
+				       {25000, BMC150_ACCEL_SLEEP_25_MS},
+				       {50000, BMC150_ACCEL_SLEEP_50_MS},
+				       {100000, BMC150_ACCEL_SLEEP_100_MS},
+				       {500000, BMC150_ACCEL_SLEEP_500_MS},
+				       {1000000, BMC150_ACCEL_SLEEP_1_SEC} };
+
+
+static int bmc150_accel_set_mode(struct bmc150_accel_data *data,
+				 enum bmc150_power_modes mode,
+				 int dur_us)
+{
+	int i;
+	int ret;
+	u8 lpw_bits;
+	int dur_val = -1;
+
+	if (dur_us > 0) {
+		for (i = 0; i < ARRAY_SIZE(bmc150_accel_sleep_value_table);
+									 ++i) {
+			if (bmc150_accel_sleep_value_table[i].sleep_dur ==
+									dur_us)
+				dur_val =
+				bmc150_accel_sleep_value_table[i].reg_value;
+		}
+	} else
+		dur_val = 0;
+
+	if (dur_val < 0)
+		return -EINVAL;
+
+	lpw_bits = mode << BMC150_ACCEL_PMU_MODE_SHIFT;
+	lpw_bits |= (dur_val << BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT);
+
+	dev_dbg(&data->client->dev, "Set Mode bits %x\n", lpw_bits);
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					BMC150_ACCEL_REG_PMU_LPW, lpw_bits);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_pmu_lpw\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val,
+			       int val2)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) {
+		if (bmc150_accel_samp_freq_table[i].val == val &&
+				bmc150_accel_samp_freq_table[i].val2 == val2) {
+			ret = i2c_smbus_write_byte_data(
+				data->client,
+				BMC150_ACCEL_REG_PMU_BW,
+				bmc150_accel_samp_freq_table[i].bw_bits);
+			if (ret < 0)
+				return ret;
+
+			data->bw_bits =
+				bmc150_accel_samp_freq_table[i].bw_bits;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int bmc150_accel_update_slope(struct bmc150_accel_data *data)
+{
+	int ret, val;
+
+	ret = i2c_smbus_write_byte_data(data->client, BMC150_ACCEL_REG_INT_6,
+					data->slope_thres);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_int_6\n");
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_INT_5);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_int_5\n");
+		return ret;
+	}
+
+	val = (ret & ~BMC150_ACCEL_SLOPE_DUR_MASK) | data->slope_dur;
+	ret = i2c_smbus_write_byte_data(data->client, BMC150_ACCEL_REG_INT_5,
+					val);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error write reg_int_5\n");
+		return ret;
+	}
+
+	dev_dbg(&data->client->dev, "%s: %x %x\n", __func__, data->slope_thres,
+		data->slope_dur);
+
+	return ret;
+}
+
+static int bmc150_accel_any_motion_setup(struct bmc150_accel_trigger *t,
+					 bool state)
+{
+	if (state)
+		return bmc150_accel_update_slope(t->data);
+
+	return 0;
+}
+
+static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_CHIP_ID);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"Error: Reading chip id\n");
+		return ret;
+	}
+
+	dev_dbg(&data->client->dev, "Chip Id %x\n", ret);
+	if (ret != data->chip_info->chip_id) {
+		dev_err(&data->client->dev, "Invalid chip %x\n", ret);
+		return -ENODEV;
+	}
+
+	ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Set Bandwidth */
+	ret = bmc150_accel_set_bw(data, BMC150_ACCEL_DEF_BW, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Set Default Range */
+	ret = i2c_smbus_write_byte_data(data->client,
+					BMC150_ACCEL_REG_PMU_RANGE,
+					BMC150_ACCEL_DEF_RANGE_4G);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+					"Error writing reg_pmu_range\n");
+		return ret;
+	}
+
+	data->range = BMC150_ACCEL_DEF_RANGE_4G;
+
+	/* Set default slope duration and thresholds */
+	data->slope_thres = BMC150_ACCEL_DEF_SLOPE_THRESHOLD;
+	data->slope_dur = BMC150_ACCEL_DEF_SLOPE_DURATION;
+	ret = bmc150_accel_update_slope(data);
+	if (ret < 0)
+		return ret;
+
+	/* Set default as latched interrupts */
+	ret = i2c_smbus_write_byte_data(data->client,
+					BMC150_ACCEL_REG_INT_RST_LATCH,
+					BMC150_ACCEL_INT_MODE_LATCH_INT |
+					BMC150_ACCEL_INT_MODE_LATCH_RESET);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"Error writing reg_int_rst_latch\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bmc150_accel_get_bw(struct bmc150_accel_data *data, int *val,
+			       int *val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) {
+		if (bmc150_accel_samp_freq_table[i].bw_bits == data->bw_bits) {
+			*val = bmc150_accel_samp_freq_table[i].val;
+			*val2 = bmc150_accel_samp_freq_table[i].val2;
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+	}
+
+	return -EINVAL;
+}
+
+#ifdef CONFIG_PM
+static int bmc150_accel_get_startup_times(struct bmc150_accel_data *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bmc150_accel_sample_upd_time); ++i) {
+		if (bmc150_accel_sample_upd_time[i].bw_bits == data->bw_bits)
+			return bmc150_accel_sample_upd_time[i].msec;
+	}
+
+	return BMC150_ACCEL_MAX_STARTUP_TIME_MS;
+}
+
+static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on)
+{
+	int ret;
+
+	if (on)
+		ret = pm_runtime_get_sync(&data->client->dev);
+	else {
+		pm_runtime_mark_last_busy(&data->client->dev);
+		ret = pm_runtime_put_autosuspend(&data->client->dev);
+	}
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"Failed: bmc150_accel_set_power_state for %d\n", on);
+		if (on)
+			pm_runtime_put_noidle(&data->client->dev);
+
+		return ret;
+	}
+
+	return 0;
+}
+#else
+static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on)
+{
+	return 0;
+}
+#endif
+
+static const struct bmc150_accel_interrupt_info {
+	u8 map_reg;
+	u8 map_bitmask;
+	u8 en_reg;
+	u8 en_bitmask;
+} bmc150_accel_interrupts[BMC150_ACCEL_INTERRUPTS] = {
+	{ /* data ready interrupt */
+		.map_reg = BMC150_ACCEL_REG_INT_MAP_1,
+		.map_bitmask = BMC150_ACCEL_INT_MAP_1_BIT_DATA,
+		.en_reg = BMC150_ACCEL_REG_INT_EN_1,
+		.en_bitmask = BMC150_ACCEL_INT_EN_BIT_DATA_EN,
+	},
+	{  /* motion interrupt */
+		.map_reg = BMC150_ACCEL_REG_INT_MAP_0,
+		.map_bitmask = BMC150_ACCEL_INT_MAP_0_BIT_SLOPE,
+		.en_reg = BMC150_ACCEL_REG_INT_EN_0,
+		.en_bitmask =  BMC150_ACCEL_INT_EN_BIT_SLP_X |
+			BMC150_ACCEL_INT_EN_BIT_SLP_Y |
+			BMC150_ACCEL_INT_EN_BIT_SLP_Z
+	},
+	{ /* fifo watermark interrupt */
+		.map_reg = BMC150_ACCEL_REG_INT_MAP_1,
+		.map_bitmask = BMC150_ACCEL_INT_MAP_1_BIT_FWM,
+		.en_reg = BMC150_ACCEL_REG_INT_EN_1,
+		.en_bitmask = BMC150_ACCEL_INT_EN_BIT_FWM_EN,
+	},
+};
+
+static void bmc150_accel_interrupts_setup(struct iio_dev *indio_dev,
+					  struct bmc150_accel_data *data)
+{
+	int i;
+
+	for (i = 0; i < BMC150_ACCEL_INTERRUPTS; i++)
+		data->interrupts[i].info = &bmc150_accel_interrupts[i];
+}
+
+static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i,
+				      bool state)
+{
+	struct bmc150_accel_interrupt *intr = &data->interrupts[i];
+	const struct bmc150_accel_interrupt_info *info = intr->info;
+	int ret;
+
+	if (state) {
+		if (atomic_inc_return(&intr->users) > 1)
+			return 0;
+	} else {
+		if (atomic_dec_return(&intr->users) > 0)
+			return 0;
+	}
+
+	/*
+	 * We will expect the enable and disable to do operation in
+	 * in reverse order. This will happen here anyway as our
+	 * resume operation uses sync mode runtime pm calls, the
+	 * suspend operation will be delayed by autosuspend delay
+	 * So the disable operation will still happen in reverse of
+	 * enable operation. When runtime pm is disabled the mode
+	 * is always on so sequence doesn't matter
+	 */
+	ret = bmc150_accel_set_power_state(data, state);
+	if (ret < 0)
+		return ret;
+
+	/* map the interrupt to the appropriate pins */
+	ret = i2c_smbus_read_byte_data(data->client, info->map_reg);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_int_map\n");
+		goto out_fix_power_state;
+	}
+	if (state)
+		ret |= info->map_bitmask;
+	else
+		ret &= ~info->map_bitmask;
+
+	ret = i2c_smbus_write_byte_data(data->client, info->map_reg,
+					ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_int_map\n");
+		goto out_fix_power_state;
+	}
+
+	/* enable/disable the interrupt */
+	ret = i2c_smbus_read_byte_data(data->client, info->en_reg);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_int_en\n");
+		goto out_fix_power_state;
+	}
+
+	if (state)
+		ret |= info->en_bitmask;
+	else
+		ret &= ~info->en_bitmask;
+
+	ret = i2c_smbus_write_byte_data(data->client, info->en_reg, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_int_en\n");
+		goto out_fix_power_state;
+	}
+
+	if (state)
+		atomic_inc(&data->active_intr);
+	else
+		atomic_dec(&data->active_intr);
+
+	return 0;
+
+out_fix_power_state:
+	bmc150_accel_set_power_state(data, false);
+	return ret;
+}
+
+
+static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val)
+{
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(data->chip_info->scale_table); ++i) {
+		if (data->chip_info->scale_table[i].scale == val) {
+			ret = i2c_smbus_write_byte_data(
+				     data->client,
+				     BMC150_ACCEL_REG_PMU_RANGE,
+				     data->chip_info->scale_table[i].reg_range);
+			if (ret < 0) {
+				dev_err(&data->client->dev,
+					"Error writing pmu_range\n");
+				return ret;
+			}
+
+			data->range = data->chip_info->scale_table[i].reg_range;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val)
+{
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_TEMP);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_temp\n");
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+	*val = sign_extend32(ret, 7);
+
+	mutex_unlock(&data->mutex);
+
+	return IIO_VAL_INT;
+}
+
+static int bmc150_accel_get_axis(struct bmc150_accel_data *data,
+				 struct iio_chan_spec const *chan,
+				 int *val)
+{
+	int ret;
+	int axis = chan->scan_index;
+
+	mutex_lock(&data->mutex);
+	ret = bmc150_accel_set_power_state(data, true);
+	if (ret < 0) {
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+
+	ret = i2c_smbus_read_word_data(data->client,
+				       BMC150_ACCEL_AXIS_TO_REG(axis));
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading axis %d\n", axis);
+		bmc150_accel_set_power_state(data, false);
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+	*val = sign_extend32(ret >> chan->scan_type.shift,
+			     chan->scan_type.realbits - 1);
+	ret = bmc150_accel_set_power_state(data, false);
+	mutex_unlock(&data->mutex);
+	if (ret < 0)
+		return ret;
+
+	return IIO_VAL_INT;
+}
+
+static int bmc150_accel_read_raw(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int *val, int *val2, long mask)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_TEMP:
+			return bmc150_accel_get_temp(data, val);
+		case IIO_ACCEL:
+			if (iio_buffer_enabled(indio_dev))
+				return -EBUSY;
+			else
+				return bmc150_accel_get_axis(data, chan, val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		if (chan->type == IIO_TEMP) {
+			*val = BMC150_ACCEL_TEMP_CENTER_VAL;
+			return IIO_VAL_INT;
+		} else
+			return -EINVAL;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val2 = 500000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_ACCEL:
+		{
+			int i;
+			const struct bmc150_scale_info *si;
+			int st_size = ARRAY_SIZE(data->chip_info->scale_table);
+
+			for (i = 0; i < st_size; ++i) {
+				si = &data->chip_info->scale_table[i];
+				if (si->reg_range == data->range) {
+					*val2 = si->scale;
+					return IIO_VAL_INT_PLUS_MICRO;
+				}
+			}
+			return -EINVAL;
+		}
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		mutex_lock(&data->mutex);
+		ret = bmc150_accel_get_bw(data, val, val2);
+		mutex_unlock(&data->mutex);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bmc150_accel_write_raw(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  int val, int val2, long mask)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		mutex_lock(&data->mutex);
+		ret = bmc150_accel_set_bw(data, val, val2);
+		mutex_unlock(&data->mutex);
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		if (val)
+			return -EINVAL;
+
+		mutex_lock(&data->mutex);
+		ret = bmc150_accel_set_scale(data, val2);
+		mutex_unlock(&data->mutex);
+		return ret;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int bmc150_accel_read_event(struct iio_dev *indio_dev,
+				   const struct iio_chan_spec *chan,
+				   enum iio_event_type type,
+				   enum iio_event_direction dir,
+				   enum iio_event_info info,
+				   int *val, int *val2)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+
+	*val2 = 0;
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		*val = data->slope_thres;
+		break;
+	case IIO_EV_INFO_PERIOD:
+		*val = data->slope_dur;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return IIO_VAL_INT;
+}
+
+static int bmc150_accel_write_event(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    enum iio_event_info info,
+				    int val, int val2)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+
+	if (data->ev_enable_state)
+		return -EBUSY;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		data->slope_thres = val & 0xFF;
+		break;
+	case IIO_EV_INFO_PERIOD:
+		data->slope_dur = val & BMC150_ACCEL_SLOPE_DUR_MASK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bmc150_accel_read_event_config(struct iio_dev *indio_dev,
+					  const struct iio_chan_spec *chan,
+					  enum iio_event_type type,
+					  enum iio_event_direction dir)
+{
+
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+
+	return data->ev_enable_state;
+}
+
+static int bmc150_accel_write_event_config(struct iio_dev *indio_dev,
+					   const struct iio_chan_spec *chan,
+					   enum iio_event_type type,
+					   enum iio_event_direction dir,
+					   int state)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (state == data->ev_enable_state)
+		return 0;
+
+	mutex_lock(&data->mutex);
+
+	ret = bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_ANY_MOTION,
+					 state);
+	if (ret < 0) {
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+
+	data->ev_enable_state = state;
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev,
+				   struct iio_trigger *trig)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int i;
+
+	for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) {
+		if (data->triggers[i].indio_trig == trig)
+			return 0;
+	}
+
+	return -EINVAL;
+}
+
+static ssize_t bmc150_accel_get_fifo_watermark(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int wm;
+
+	mutex_lock(&data->mutex);
+	wm = data->watermark;
+	mutex_unlock(&data->mutex);
+
+	return sprintf(buf, "%d\n", wm);
+}
+
+static ssize_t bmc150_accel_get_fifo_state(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	bool state;
+
+	mutex_lock(&data->mutex);
+	state = data->fifo_mode;
+	mutex_unlock(&data->mutex);
+
+	return sprintf(buf, "%d\n", state);
+}
+
+static IIO_CONST_ATTR(hwfifo_watermark_min, "1");
+static IIO_CONST_ATTR(hwfifo_watermark_max,
+		      __stringify(BMC150_ACCEL_FIFO_LENGTH));
+static IIO_DEVICE_ATTR(hwfifo_enabled, S_IRUGO,
+		       bmc150_accel_get_fifo_state, NULL, 0);
+static IIO_DEVICE_ATTR(hwfifo_watermark, S_IRUGO,
+		       bmc150_accel_get_fifo_watermark, NULL, 0);
+
+static const struct attribute *bmc150_accel_fifo_attributes[] = {
+	&iio_const_attr_hwfifo_watermark_min.dev_attr.attr,
+	&iio_const_attr_hwfifo_watermark_max.dev_attr.attr,
+	&iio_dev_attr_hwfifo_watermark.dev_attr.attr,
+	&iio_dev_attr_hwfifo_enabled.dev_attr.attr,
+	NULL,
+};
+
+static int bmc150_accel_set_watermark(struct iio_dev *indio_dev, unsigned val)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+
+	if (val > BMC150_ACCEL_FIFO_LENGTH)
+		val = BMC150_ACCEL_FIFO_LENGTH;
+
+	mutex_lock(&data->mutex);
+	data->watermark = val;
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+/*
+ * We must read at least one full frame in one burst, otherwise the rest of the
+ * frame data is discarded.
+ */
+static int bmc150_accel_fifo_transfer(const struct i2c_client *client,
+				      char *buffer, int samples)
+{
+	int sample_length = 3 * 2;
+	u8 reg_fifo_data = BMC150_ACCEL_REG_FIFO_DATA;
+	int ret = -EIO;
+
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		struct i2c_msg msg[2] = {
+			{
+				.addr = client->addr,
+				.flags = 0,
+				.buf = &reg_fifo_data,
+				.len = sizeof(reg_fifo_data),
+			},
+			{
+				.addr = client->addr,
+				.flags = I2C_M_RD,
+				.buf = (u8 *)buffer,
+				.len = samples * sample_length,
+			}
+		};
+
+		ret = i2c_transfer(client->adapter, msg, 2);
+		if (ret != 2)
+			ret = -EIO;
+		else
+			ret = 0;
+	} else {
+		int i, step = I2C_SMBUS_BLOCK_MAX / sample_length;
+
+		for (i = 0; i < samples * sample_length; i += step) {
+			ret = i2c_smbus_read_i2c_block_data(client,
+							    reg_fifo_data, step,
+							    &buffer[i]);
+			if (ret != step) {
+				ret = -EIO;
+				break;
+			}
+
+			ret = 0;
+		}
+	}
+
+	if (ret)
+		dev_err(&client->dev, "Error transferring data from fifo\n");
+
+	return ret;
+}
+
+static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev,
+				     unsigned samples, bool irq)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int ret, i;
+	u8 count;
+	u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
+	int64_t tstamp;
+	uint64_t sample_period;
+	ret = i2c_smbus_read_byte_data(data->client,
+				       BMC150_ACCEL_REG_FIFO_STATUS);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_fifo_status\n");
+		return ret;
+	}
+
+	count = ret & 0x7F;
+
+	if (!count)
+		return 0;
+
+	/*
+	 * If we getting called from IRQ handler we know the stored timestamp is
+	 * fairly accurate for the last stored sample. Otherwise, if we are
+	 * called as a result of a read operation from userspace and hence
+	 * before the watermark interrupt was triggered, take a timestamp
+	 * now. We can fall anywhere in between two samples so the error in this
+	 * case is at most one sample period.
+	 */
+	if (!irq) {
+		data->old_timestamp = data->timestamp;
+		data->timestamp = iio_get_time_ns();
+	}
+
+	/*
+	 * Approximate timestamps for each of the sample based on the sampling
+	 * frequency, timestamp for last sample and number of samples.
+	 *
+	 * Note that we can't use the current bandwidth settings to compute the
+	 * sample period because the sample rate varies with the device
+	 * (e.g. between 31.70ms to 32.20ms for a bandwidth of 15.63HZ). That
+	 * small variation adds when we store a large number of samples and
+	 * creates significant jitter between the last and first samples in
+	 * different batches (e.g. 32ms vs 21ms).
+	 *
+	 * To avoid this issue we compute the actual sample period ourselves
+	 * based on the timestamp delta between the last two flush operations.
+	 */
+	sample_period = (data->timestamp - data->old_timestamp);
+	do_div(sample_period, count);
+	tstamp = data->timestamp - (count - 1) * sample_period;
+
+	if (samples && count > samples)
+		count = samples;
+
+	ret = bmc150_accel_fifo_transfer(data->client, (u8 *)buffer, count);
+	if (ret)
+		return ret;
+
+	/*
+	 * Ideally we want the IIO core to handle the demux when running in fifo
+	 * mode but not when running in triggered buffer mode. Unfortunately
+	 * this does not seem to be possible, so stick with driver demux for
+	 * now.
+	 */
+	for (i = 0; i < count; i++) {
+		u16 sample[8];
+		int j, bit;
+
+		j = 0;
+		for_each_set_bit(bit, indio_dev->active_scan_mask,
+				 indio_dev->masklength)
+			memcpy(&sample[j++], &buffer[i * 3 + bit], 2);
+
+		iio_push_to_buffers_with_timestamp(indio_dev, sample, tstamp);
+
+		tstamp += sample_period;
+	}
+
+	return count;
+}
+
+static int bmc150_accel_fifo_flush(struct iio_dev *indio_dev, unsigned samples)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = __bmc150_accel_fifo_flush(indio_dev, samples, false);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
+		"15.620000 31.260000 62.50000 125 250 500 1000 2000");
+
+static struct attribute *bmc150_accel_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group bmc150_accel_attrs_group = {
+	.attrs = bmc150_accel_attributes,
+};
+
+static const struct iio_event_spec bmc150_accel_event = {
+		.type = IIO_EV_TYPE_ROC,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+				 BIT(IIO_EV_INFO_ENABLE) |
+				 BIT(IIO_EV_INFO_PERIOD)
+};
+
+#define BMC150_ACCEL_CHANNEL(_axis, bits) {				\
+	.type = IIO_ACCEL,						\
+	.modified = 1,							\
+	.channel2 = IIO_MOD_##_axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
+				BIT(IIO_CHAN_INFO_SAMP_FREQ),		\
+	.scan_index = AXIS_##_axis,					\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = (bits),					\
+		.storagebits = 16,					\
+		.shift = 16 - (bits),					\
+	},								\
+	.event_spec = &bmc150_accel_event,				\
+	.num_event_specs = 1						\
+}
+
+#define BMC150_ACCEL_CHANNELS(bits) {					\
+	{								\
+		.type = IIO_TEMP,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+				      BIT(IIO_CHAN_INFO_SCALE) |	\
+				      BIT(IIO_CHAN_INFO_OFFSET),	\
+		.scan_index = -1,					\
+	},								\
+	BMC150_ACCEL_CHANNEL(X, bits),					\
+	BMC150_ACCEL_CHANNEL(Y, bits),					\
+	BMC150_ACCEL_CHANNEL(Z, bits),					\
+	IIO_CHAN_SOFT_TIMESTAMP(3),					\
+}
+
+static const struct iio_chan_spec bma222e_accel_channels[] =
+	BMC150_ACCEL_CHANNELS(8);
+static const struct iio_chan_spec bma250e_accel_channels[] =
+	BMC150_ACCEL_CHANNELS(10);
+static const struct iio_chan_spec bmc150_accel_channels[] =
+	BMC150_ACCEL_CHANNELS(12);
+static const struct iio_chan_spec bma280_accel_channels[] =
+	BMC150_ACCEL_CHANNELS(14);
+
+enum {
+	bmc150,
+	bmi055,
+	bma255,
+	bma250e,
+	bma222e,
+	bma280,
+};
+
+static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
+	[bmc150] = {
+		.chip_id = 0xFA,
+		.channels = bmc150_accel_channels,
+		.num_channels = ARRAY_SIZE(bmc150_accel_channels),
+		.scale_table = { {9610, BMC150_ACCEL_DEF_RANGE_2G},
+				 {19122, BMC150_ACCEL_DEF_RANGE_4G},
+				 {38344, BMC150_ACCEL_DEF_RANGE_8G},
+				 {76590, BMC150_ACCEL_DEF_RANGE_16G} },
+	},
+	[bmi055] = {
+		.chip_id = 0xFA,
+		.channels = bmc150_accel_channels,
+		.num_channels = ARRAY_SIZE(bmc150_accel_channels),
+		.scale_table = { {9610, BMC150_ACCEL_DEF_RANGE_2G},
+				 {19122, BMC150_ACCEL_DEF_RANGE_4G},
+				 {38344, BMC150_ACCEL_DEF_RANGE_8G},
+				 {76590, BMC150_ACCEL_DEF_RANGE_16G} },
+	},
+	[bma255] = {
+		.chip_id = 0xFA,
+		.channels = bmc150_accel_channels,
+		.num_channels = ARRAY_SIZE(bmc150_accel_channels),
+		.scale_table = { {9610, BMC150_ACCEL_DEF_RANGE_2G},
+				 {19122, BMC150_ACCEL_DEF_RANGE_4G},
+				 {38344, BMC150_ACCEL_DEF_RANGE_8G},
+				 {76590, BMC150_ACCEL_DEF_RANGE_16G} },
+	},
+	[bma250e] = {
+		.chip_id = 0xF9,
+		.channels = bma250e_accel_channels,
+		.num_channels = ARRAY_SIZE(bma250e_accel_channels),
+		.scale_table = { {38344, BMC150_ACCEL_DEF_RANGE_2G},
+				 {76590, BMC150_ACCEL_DEF_RANGE_4G},
+				 {153277, BMC150_ACCEL_DEF_RANGE_8G},
+				 {306457, BMC150_ACCEL_DEF_RANGE_16G} },
+	},
+	[bma222e] = {
+		.chip_id = 0xF8,
+		.channels = bma222e_accel_channels,
+		.num_channels = ARRAY_SIZE(bma222e_accel_channels),
+		.scale_table = { {153277, BMC150_ACCEL_DEF_RANGE_2G},
+				 {306457, BMC150_ACCEL_DEF_RANGE_4G},
+				 {612915, BMC150_ACCEL_DEF_RANGE_8G},
+				 {1225831, BMC150_ACCEL_DEF_RANGE_16G} },
+	},
+	[bma280] = {
+		.chip_id = 0xFB,
+		.channels = bma280_accel_channels,
+		.num_channels = ARRAY_SIZE(bma280_accel_channels),
+		.scale_table = { {2392, BMC150_ACCEL_DEF_RANGE_2G},
+				 {4785, BMC150_ACCEL_DEF_RANGE_4G},
+				 {9581, BMC150_ACCEL_DEF_RANGE_8G},
+				 {19152, BMC150_ACCEL_DEF_RANGE_16G} },
+	},
+};
+
+static const struct iio_info bmc150_accel_info = {
+	.attrs			= &bmc150_accel_attrs_group,
+	.read_raw		= bmc150_accel_read_raw,
+	.write_raw		= bmc150_accel_write_raw,
+	.read_event_value	= bmc150_accel_read_event,
+	.write_event_value	= bmc150_accel_write_event,
+	.write_event_config	= bmc150_accel_write_event_config,
+	.read_event_config	= bmc150_accel_read_event_config,
+	.validate_trigger	= bmc150_accel_validate_trigger,
+	.driver_module		= THIS_MODULE,
+};
+
+static const struct iio_info bmc150_accel_info_fifo = {
+	.attrs			= &bmc150_accel_attrs_group,
+	.read_raw		= bmc150_accel_read_raw,
+	.write_raw		= bmc150_accel_write_raw,
+	.read_event_value	= bmc150_accel_read_event,
+	.write_event_value	= bmc150_accel_write_event,
+	.write_event_config	= bmc150_accel_write_event_config,
+	.read_event_config	= bmc150_accel_read_event_config,
+	.validate_trigger	= bmc150_accel_validate_trigger,
+	.hwfifo_set_watermark	= bmc150_accel_set_watermark,
+	.hwfifo_flush_to_buffer	= bmc150_accel_fifo_flush,
+	.driver_module		= THIS_MODULE,
+};
+
+static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int bit, ret, i = 0;
+
+	mutex_lock(&data->mutex);
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		ret = i2c_smbus_read_word_data(data->client,
+					       BMC150_ACCEL_AXIS_TO_REG(bit));
+		if (ret < 0) {
+			mutex_unlock(&data->mutex);
+			goto err_read;
+		}
+		data->buffer[i++] = ret;
+	}
+	mutex_unlock(&data->mutex);
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+					   data->timestamp);
+err_read:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int bmc150_accel_trig_try_reen(struct iio_trigger *trig)
+{
+	struct bmc150_accel_trigger *t = iio_trigger_get_drvdata(trig);
+	struct bmc150_accel_data *data = t->data;
+	int ret;
+
+	/* new data interrupts don't need ack */
+	if (t == &t->data->triggers[BMC150_ACCEL_TRIGGER_DATA_READY])
+		return 0;
+
+	mutex_lock(&data->mutex);
+	/* clear any latched interrupt */
+	ret = i2c_smbus_write_byte_data(data->client,
+					BMC150_ACCEL_REG_INT_RST_LATCH,
+					BMC150_ACCEL_INT_MODE_LATCH_INT |
+					BMC150_ACCEL_INT_MODE_LATCH_RESET);
+	mutex_unlock(&data->mutex);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"Error writing reg_int_rst_latch\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bmc150_accel_trigger_set_state(struct iio_trigger *trig,
+						   bool state)
+{
+	struct bmc150_accel_trigger *t = iio_trigger_get_drvdata(trig);
+	struct bmc150_accel_data *data = t->data;
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	if (t->enabled == state) {
+		mutex_unlock(&data->mutex);
+		return 0;
+	}
+
+	if (t->setup) {
+		ret = t->setup(t, state);
+		if (ret < 0) {
+			mutex_unlock(&data->mutex);
+			return ret;
+		}
+	}
+
+	ret = bmc150_accel_set_interrupt(data, t->intr, state);
+	if (ret < 0) {
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+
+	t->enabled = state;
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static const struct iio_trigger_ops bmc150_accel_trigger_ops = {
+	.set_trigger_state = bmc150_accel_trigger_set_state,
+	.try_reenable = bmc150_accel_trig_try_reen,
+	.owner = THIS_MODULE,
+};
+
+static int bmc150_accel_handle_roc_event(struct iio_dev *indio_dev)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int dir;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client,
+				       BMC150_ACCEL_REG_INT_STATUS_2);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_int_status_2\n");
+		return ret;
+	}
+
+	if (ret & BMC150_ACCEL_ANY_MOTION_BIT_SIGN)
+		dir = IIO_EV_DIR_FALLING;
+	else
+		dir = IIO_EV_DIR_RISING;
+
+	if (ret & BMC150_ACCEL_ANY_MOTION_BIT_X)
+		iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
+							0,
+							IIO_MOD_X,
+							IIO_EV_TYPE_ROC,
+							dir),
+							data->timestamp);
+	if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Y)
+		iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
+							0,
+							IIO_MOD_Y,
+							IIO_EV_TYPE_ROC,
+							dir),
+							data->timestamp);
+	if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Z)
+		iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
+							0,
+							IIO_MOD_Z,
+							IIO_EV_TYPE_ROC,
+							dir),
+							data->timestamp);
+	return ret;
+}
+
+static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	bool ack = false;
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	if (data->fifo_mode) {
+		ret = __bmc150_accel_fifo_flush(indio_dev,
+						BMC150_ACCEL_FIFO_LENGTH, true);
+		if (ret > 0)
+			ack = true;
+	}
+
+	if (data->ev_enable_state) {
+		ret = bmc150_accel_handle_roc_event(indio_dev);
+		if (ret > 0)
+			ack = true;
+	}
+
+	if (ack) {
+		ret = i2c_smbus_write_byte_data(data->client,
+					BMC150_ACCEL_REG_INT_RST_LATCH,
+					BMC150_ACCEL_INT_MODE_LATCH_INT |
+					BMC150_ACCEL_INT_MODE_LATCH_RESET);
+		if (ret)
+			dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n");
+		ret = IRQ_HANDLED;
+	} else {
+		ret = IRQ_NONE;
+	}
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static irqreturn_t bmc150_accel_irq_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	bool ack = false;
+	int i;
+
+	data->old_timestamp = data->timestamp;
+	data->timestamp = iio_get_time_ns();
+
+	for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) {
+		if (data->triggers[i].enabled) {
+			iio_trigger_poll(data->triggers[i].indio_trig);
+			ack = true;
+			break;
+		}
+	}
+
+	if (data->ev_enable_state || data->fifo_mode)
+		return IRQ_WAKE_THREAD;
+
+	if (ack)
+		return IRQ_HANDLED;
+
+	return IRQ_NONE;
+}
+
+static const char *bmc150_accel_match_acpi_device(struct device *dev, int *data)
+{
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(dev->driver->acpi_match_table, dev);
+
+	if (!id)
+		return NULL;
+
+	*data = (int) id->driver_data;
+
+	return dev_name(dev);
+}
+
+static int bmc150_accel_gpio_probe(struct i2c_client *client,
+					struct bmc150_accel_data *data)
+{
+	struct device *dev;
+	struct gpio_desc *gpio;
+	int ret;
+
+	if (!client)
+		return -EINVAL;
+
+	dev = &client->dev;
+
+	/* data ready gpio interrupt pin */
+	gpio = devm_gpiod_get_index(dev, BMC150_ACCEL_GPIO_NAME, 0, GPIOD_IN);
+	if (IS_ERR(gpio)) {
+		dev_err(dev, "Failed: gpio get index\n");
+		return PTR_ERR(gpio);
+	}
+
+	ret = gpiod_to_irq(gpio);
+
+	dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
+
+	return ret;
+}
+
+static const struct {
+	int intr;
+	const char *name;
+	int (*setup)(struct bmc150_accel_trigger *t, bool state);
+} bmc150_accel_triggers[BMC150_ACCEL_TRIGGERS] = {
+	{
+		.intr = 0,
+		.name = "%s-dev%d",
+	},
+	{
+		.intr = 1,
+		.name = "%s-any-motion-dev%d",
+		.setup = bmc150_accel_any_motion_setup,
+	},
+};
+
+static void bmc150_accel_unregister_triggers(struct bmc150_accel_data *data,
+					     int from)
+{
+	int i;
+
+	for (i = from; i >= 0; i++) {
+		if (data->triggers[i].indio_trig) {
+			iio_trigger_unregister(data->triggers[i].indio_trig);
+			data->triggers[i].indio_trig = NULL;
+		}
+	}
+}
+
+static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev,
+				       struct bmc150_accel_data *data)
+{
+	int i, ret;
+
+	for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) {
+		struct bmc150_accel_trigger *t = &data->triggers[i];
+
+		t->indio_trig = devm_iio_trigger_alloc(&data->client->dev,
+					       bmc150_accel_triggers[i].name,
+						       indio_dev->name,
+						       indio_dev->id);
+		if (!t->indio_trig) {
+			ret = -ENOMEM;
+			break;
+		}
+
+		t->indio_trig->dev.parent = &data->client->dev;
+		t->indio_trig->ops = &bmc150_accel_trigger_ops;
+		t->intr = bmc150_accel_triggers[i].intr;
+		t->data = data;
+		t->setup = bmc150_accel_triggers[i].setup;
+		iio_trigger_set_drvdata(t->indio_trig, t);
+
+		ret = iio_trigger_register(t->indio_trig);
+		if (ret)
+			break;
+	}
+
+	if (ret)
+		bmc150_accel_unregister_triggers(data, i - 1);
+
+	return ret;
+}
+
+#define BMC150_ACCEL_FIFO_MODE_STREAM          0x80
+#define BMC150_ACCEL_FIFO_MODE_FIFO            0x40
+#define BMC150_ACCEL_FIFO_MODE_BYPASS          0x00
+
+static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data)
+{
+	u8 reg = BMC150_ACCEL_REG_FIFO_CONFIG1;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, reg, data->fifo_mode);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_fifo_config1\n");
+		return ret;
+	}
+
+	if (!data->fifo_mode)
+		return 0;
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					BMC150_ACCEL_REG_FIFO_CONFIG0,
+					data->watermark);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error writing reg_fifo_config0\n");
+
+	return ret;
+}
+
+static int bmc150_accel_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED)
+		return iio_triggered_buffer_postenable(indio_dev);
+
+	mutex_lock(&data->mutex);
+
+	if (!data->watermark)
+		goto out;
+
+	ret = bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK,
+					 true);
+	if (ret)
+		goto out;
+
+	data->fifo_mode = BMC150_ACCEL_FIFO_MODE_FIFO;
+
+	ret = bmc150_accel_fifo_set_mode(data);
+	if (ret) {
+		data->fifo_mode = 0;
+		bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK,
+					   false);
+	}
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int bmc150_accel_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+
+	if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED)
+		return iio_triggered_buffer_predisable(indio_dev);
+
+	mutex_lock(&data->mutex);
+
+	if (!data->fifo_mode)
+		goto out;
+
+	bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK, false);
+	__bmc150_accel_fifo_flush(indio_dev, BMC150_ACCEL_FIFO_LENGTH, false);
+	data->fifo_mode = 0;
+	bmc150_accel_fifo_set_mode(data);
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops bmc150_accel_buffer_ops = {
+	.postenable = bmc150_accel_buffer_postenable,
+	.predisable = bmc150_accel_buffer_predisable,
+};
+
+static int bmc150_accel_probe(struct i2c_client *client,
+			      const struct i2c_device_id *id)
+{
+	struct bmc150_accel_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+	const char *name = NULL;
+	int chip_id = 0;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	if (id) {
+		name = id->name;
+		chip_id = id->driver_data;
+	}
+
+	if (ACPI_HANDLE(&client->dev))
+		name = bmc150_accel_match_acpi_device(&client->dev, &chip_id);
+
+	data->chip_info = &bmc150_accel_chip_info_tbl[chip_id];
+
+	ret = bmc150_accel_chip_init(data);
+	if (ret < 0)
+		return ret;
+
+	mutex_init(&data->mutex);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = data->chip_info->channels;
+	indio_dev->num_channels = data->chip_info->num_channels;
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &bmc150_accel_info;
+
+	if (client->irq < 0)
+		client->irq = bmc150_accel_gpio_probe(client, data);
+
+	if (client->irq >= 0) {
+		ret = devm_request_threaded_irq(
+						&client->dev, client->irq,
+						bmc150_accel_irq_handler,
+						bmc150_accel_irq_thread_handler,
+						IRQF_TRIGGER_RISING,
+						BMC150_ACCEL_IRQ_NAME,
+						indio_dev);
+		if (ret)
+			return ret;
+
+		/*
+		 * Set latched mode interrupt. While certain interrupts are
+		 * non-latched regardless of this settings (e.g. new data) we
+		 * want to use latch mode when we can to prevent interrupt
+		 * flooding.
+		 */
+		ret = i2c_smbus_write_byte_data(data->client,
+						BMC150_ACCEL_REG_INT_RST_LATCH,
+					     BMC150_ACCEL_INT_MODE_LATCH_RESET);
+		if (ret < 0) {
+			dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n");
+			return ret;
+		}
+
+		bmc150_accel_interrupts_setup(indio_dev, data);
+
+		ret = bmc150_accel_triggers_setup(indio_dev, data);
+		if (ret)
+			return ret;
+
+		ret = iio_triggered_buffer_setup(indio_dev,
+						 &iio_pollfunc_store_time,
+						 bmc150_accel_trigger_handler,
+						 &bmc150_accel_buffer_ops);
+		if (ret < 0) {
+			dev_err(&client->dev,
+				"Failed: iio triggered buffer setup\n");
+			goto err_trigger_unregister;
+		}
+
+		if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
+		    i2c_check_functionality(client->adapter,
+					    I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+			indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
+			indio_dev->info = &bmc150_accel_info_fifo;
+			indio_dev->buffer->attrs = bmc150_accel_fifo_attributes;
+		}
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "Unable to register iio device\n");
+		goto err_buffer_cleanup;
+	}
+
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret)
+		goto err_iio_unregister;
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev,
+					 BMC150_AUTO_SUSPEND_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	return 0;
+
+err_iio_unregister:
+	iio_device_unregister(indio_dev);
+err_buffer_cleanup:
+	if (indio_dev->pollfunc)
+		iio_triggered_buffer_cleanup(indio_dev);
+err_trigger_unregister:
+	bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1);
+
+	return ret;
+}
+
+static int bmc150_accel_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_put_noidle(&client->dev);
+
+	iio_device_unregister(indio_dev);
+
+	bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1);
+
+	mutex_lock(&data->mutex);
+	bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND, 0);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bmc150_accel_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->mutex);
+	bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static int bmc150_accel_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->mutex);
+	if (atomic_read(&data->active_intr))
+		bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
+	bmc150_accel_fifo_set_mode(data);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM
+static int bmc150_accel_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int ret;
+
+	dev_dbg(&data->client->dev,  __func__);
+	ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0);
+	if (ret < 0)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static int bmc150_accel_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct bmc150_accel_data *data = iio_priv(indio_dev);
+	int ret;
+	int sleep_val;
+
+	dev_dbg(&data->client->dev,  __func__);
+
+	ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
+	if (ret < 0)
+		return ret;
+	ret = bmc150_accel_fifo_set_mode(data);
+	if (ret < 0)
+		return ret;
+
+	sleep_val = bmc150_accel_get_startup_times(data);
+	if (sleep_val < 20)
+		usleep_range(sleep_val * 1000, 20000);
+	else
+		msleep_interruptible(sleep_val);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops bmc150_accel_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(bmc150_accel_suspend, bmc150_accel_resume)
+	SET_RUNTIME_PM_OPS(bmc150_accel_runtime_suspend,
+			   bmc150_accel_runtime_resume, NULL)
+};
+
+static const struct acpi_device_id bmc150_accel_acpi_match[] = {
+	{"BSBA0150",	bmc150},
+	{"BMC150A",	bmc150},
+	{"BMI055A",	bmi055},
+	{"BMA0255",	bma255},
+	{"BMA250E",	bma250e},
+	{"BMA222E",	bma222e},
+	{"BMA0280",	bma280},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
+
+static const struct i2c_device_id bmc150_accel_id[] = {
+	{"bmc150_accel",	bmc150},
+	{"bmi055_accel",	bmi055},
+	{"bma255",		bma255},
+	{"bma250e",		bma250e},
+	{"bma222e",		bma222e},
+	{"bma280",		bma280},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
+
+static struct i2c_driver bmc150_accel_driver = {
+	.driver = {
+		.name	= BMC150_ACCEL_DRV_NAME,
+		.acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
+		.pm	= &bmc150_accel_pm_ops,
+	},
+	.probe		= bmc150_accel_probe,
+	.remove		= bmc150_accel_remove,
+	.id_table	= bmc150_accel_id,
+};
+module_i2c_driver(bmc150_accel_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("BMC150 accelerometer driver");
diff --git a/kernel/drivers/iio/accel/hid-sensor-accel-3d.c b/kernel/drivers/iio/accel/hid-sensor-accel-3d.c
new file mode 100644
index 000000000..2b4fad699
--- /dev/null
+++ b/kernel/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -0,0 +1,425 @@
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include "../common/hid-sensors/hid-sensor-trigger.h"
+
+enum accel_3d_channel {
+	CHANNEL_SCAN_INDEX_X,
+	CHANNEL_SCAN_INDEX_Y,
+	CHANNEL_SCAN_INDEX_Z,
+	ACCEL_3D_CHANNEL_MAX,
+};
+
+struct accel_3d_state {
+	struct hid_sensor_hub_callbacks callbacks;
+	struct hid_sensor_common common_attributes;
+	struct hid_sensor_hub_attribute_info accel[ACCEL_3D_CHANNEL_MAX];
+	u32 accel_val[ACCEL_3D_CHANNEL_MAX];
+	int scale_pre_decml;
+	int scale_post_decml;
+	int scale_precision;
+	int value_offset;
+};
+
+static const u32 accel_3d_addresses[ACCEL_3D_CHANNEL_MAX] = {
+	HID_USAGE_SENSOR_ACCEL_X_AXIS,
+	HID_USAGE_SENSOR_ACCEL_Y_AXIS,
+	HID_USAGE_SENSOR_ACCEL_Z_AXIS
+};
+
+/* Channel definitions */
+static const struct iio_chan_spec accel_3d_channels[] = {
+	{
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+		.scan_index = CHANNEL_SCAN_INDEX_X,
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+		.scan_index = CHANNEL_SCAN_INDEX_Y,
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Z,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+		.scan_index = CHANNEL_SCAN_INDEX_Z,
+	}
+};
+
+/* Adjust channel real bits based on report descriptor */
+static void accel_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
+						int channel, int size)
+{
+	channels[channel].scan_type.sign = 's';
+	/* Real storage bits will change based on the report desc. */
+	channels[channel].scan_type.realbits = size * 8;
+	/* Maximum size of a sample to capture is u32 */
+	channels[channel].scan_type.storagebits = sizeof(u32) * 8;
+}
+
+/* Channel read_raw handler */
+static int accel_3d_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2,
+			      long mask)
+{
+	struct accel_3d_state *accel_state = iio_priv(indio_dev);
+	int report_id = -1;
+	u32 address;
+	int ret_type;
+
+	*val = 0;
+	*val2 = 0;
+	switch (mask) {
+	case 0:
+		hid_sensor_power_state(&accel_state->common_attributes, true);
+		report_id = accel_state->accel[chan->scan_index].report_id;
+		address = accel_3d_addresses[chan->scan_index];
+		if (report_id >= 0)
+			*val = sensor_hub_input_attr_get_raw_value(
+					accel_state->common_attributes.hsdev,
+					HID_USAGE_SENSOR_ACCEL_3D, address,
+					report_id,
+					SENSOR_HUB_SYNC);
+		else {
+			*val = 0;
+			hid_sensor_power_state(&accel_state->common_attributes,
+						 false);
+			return -EINVAL;
+		}
+		hid_sensor_power_state(&accel_state->common_attributes, false);
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = accel_state->scale_pre_decml;
+		*val2 = accel_state->scale_post_decml;
+		ret_type = accel_state->scale_precision;
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = accel_state->value_offset;
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret_type = hid_sensor_read_samp_freq_value(
+			&accel_state->common_attributes, val, val2);
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret_type = hid_sensor_read_raw_hyst_value(
+			&accel_state->common_attributes, val, val2);
+		break;
+	default:
+		ret_type = -EINVAL;
+		break;
+	}
+
+	return ret_type;
+}
+
+/* Channel write_raw handler */
+static int accel_3d_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct accel_3d_state *accel_state = iio_priv(indio_dev);
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = hid_sensor_write_samp_freq_value(
+				&accel_state->common_attributes, val, val2);
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret = hid_sensor_write_raw_hyst_value(
+				&accel_state->common_attributes, val, val2);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct iio_info accel_3d_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &accel_3d_read_raw,
+	.write_raw = &accel_3d_write_raw,
+};
+
+/* Function to push data to buffer */
+static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
+	int len)
+{
+	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
+	iio_push_to_buffers(indio_dev, data);
+}
+
+/* Callback handler to send event after all samples are received and captured */
+static int accel_3d_proc_event(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct accel_3d_state *accel_state = iio_priv(indio_dev);
+
+	dev_dbg(&indio_dev->dev, "accel_3d_proc_event\n");
+	if (atomic_read(&accel_state->common_attributes.data_ready))
+		hid_sensor_push_data(indio_dev,
+				accel_state->accel_val,
+				sizeof(accel_state->accel_val));
+
+	return 0;
+}
+
+/* Capture samples in local storage */
+static int accel_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				size_t raw_len, char *raw_data,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct accel_3d_state *accel_state = iio_priv(indio_dev);
+	int offset;
+	int ret = -EINVAL;
+
+	switch (usage_id) {
+	case HID_USAGE_SENSOR_ACCEL_X_AXIS:
+	case HID_USAGE_SENSOR_ACCEL_Y_AXIS:
+	case HID_USAGE_SENSOR_ACCEL_Z_AXIS:
+		offset = usage_id - HID_USAGE_SENSOR_ACCEL_X_AXIS;
+		accel_state->accel_val[CHANNEL_SCAN_INDEX_X + offset] =
+						*(u32 *)raw_data;
+		ret = 0;
+	break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/* Parse report which is specific to an usage id*/
+static int accel_3d_parse_report(struct platform_device *pdev,
+				struct hid_sensor_hub_device *hsdev,
+				struct iio_chan_spec *channels,
+				unsigned usage_id,
+				struct accel_3d_state *st)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) {
+		ret = sensor_hub_input_get_attribute_info(hsdev,
+				HID_INPUT_REPORT,
+				usage_id,
+				HID_USAGE_SENSOR_ACCEL_X_AXIS + i,
+				&st->accel[CHANNEL_SCAN_INDEX_X + i]);
+		if (ret < 0)
+			break;
+		accel_3d_adjust_channel_bit_mask(channels,
+				CHANNEL_SCAN_INDEX_X + i,
+				st->accel[CHANNEL_SCAN_INDEX_X + i].size);
+	}
+	dev_dbg(&pdev->dev, "accel_3d %x:%x, %x:%x, %x:%x\n",
+			st->accel[0].index,
+			st->accel[0].report_id,
+			st->accel[1].index, st->accel[1].report_id,
+			st->accel[2].index, st->accel[2].report_id);
+
+	st->scale_precision = hid_sensor_format_scale(
+				HID_USAGE_SENSOR_ACCEL_3D,
+				&st->accel[CHANNEL_SCAN_INDEX_X],
+				&st->scale_pre_decml, &st->scale_post_decml);
+
+	/* Set Sensitivity field ids, when there is no individual modifier */
+	if (st->common_attributes.sensitivity.index < 0) {
+		sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+			HID_USAGE_SENSOR_DATA_ACCELERATION,
+			&st->common_attributes.sensitivity);
+		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
+			st->common_attributes.sensitivity.index,
+			st->common_attributes.sensitivity.report_id);
+	}
+
+	return ret;
+}
+
+/* Function to initialize the processing for usage id */
+static int hid_accel_3d_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	static const char *name = "accel_3d";
+	struct iio_dev *indio_dev;
+	struct accel_3d_state *accel_state;
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_chan_spec *channels;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev,
+					  sizeof(struct accel_3d_state));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	accel_state = iio_priv(indio_dev);
+	accel_state->common_attributes.hsdev = hsdev;
+	accel_state->common_attributes.pdev = pdev;
+
+	ret = hid_sensor_parse_common_attributes(hsdev,
+					HID_USAGE_SENSOR_ACCEL_3D,
+					&accel_state->common_attributes);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup common attributes\n");
+		return ret;
+	}
+
+	channels = kmemdup(accel_3d_channels, sizeof(accel_3d_channels),
+			   GFP_KERNEL);
+	if (!channels) {
+		dev_err(&pdev->dev, "failed to duplicate channels\n");
+		return -ENOMEM;
+	}
+
+	ret = accel_3d_parse_report(pdev, hsdev, channels,
+					HID_USAGE_SENSOR_ACCEL_3D, accel_state);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup attributes\n");
+		goto error_free_dev_mem;
+	}
+
+	indio_dev->channels = channels;
+	indio_dev->num_channels = ARRAY_SIZE(accel_3d_channels);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->info = &accel_3d_info;
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		NULL, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
+		goto error_free_dev_mem;
+	}
+	atomic_set(&accel_state->common_attributes.data_ready, 0);
+	ret = hid_sensor_setup_trigger(indio_dev, name,
+					&accel_state->common_attributes);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "trigger setup failed\n");
+		goto error_unreg_buffer_funcs;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "device register failed\n");
+		goto error_remove_trigger;
+	}
+
+	accel_state->callbacks.send_event = accel_3d_proc_event;
+	accel_state->callbacks.capture_sample = accel_3d_capture_sample;
+	accel_state->callbacks.pdev = pdev;
+	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D,
+					&accel_state->callbacks);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "callback reg failed\n");
+		goto error_iio_unreg;
+	}
+
+	return ret;
+
+error_iio_unreg:
+	iio_device_unregister(indio_dev);
+error_remove_trigger:
+	hid_sensor_remove_trigger(&accel_state->common_attributes);
+error_unreg_buffer_funcs:
+	iio_triggered_buffer_cleanup(indio_dev);
+error_free_dev_mem:
+	kfree(indio_dev->channels);
+	return ret;
+}
+
+/* Function to deinitialize the processing for usage id */
+static int hid_accel_3d_remove(struct platform_device *pdev)
+{
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct accel_3d_state *accel_state = iio_priv(indio_dev);
+
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D);
+	iio_device_unregister(indio_dev);
+	hid_sensor_remove_trigger(&accel_state->common_attributes);
+	iio_triggered_buffer_cleanup(indio_dev);
+	kfree(indio_dev->channels);
+
+	return 0;
+}
+
+static struct platform_device_id hid_accel_3d_ids[] = {
+	{
+		/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
+		.name = "HID-SENSOR-200073",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, hid_accel_3d_ids);
+
+static struct platform_driver hid_accel_3d_platform_driver = {
+	.id_table = hid_accel_3d_ids,
+	.driver = {
+		.name	= KBUILD_MODNAME,
+		.pm	= &hid_sensor_pm_ops,
+	},
+	.probe		= hid_accel_3d_probe,
+	.remove		= hid_accel_3d_remove,
+};
+module_platform_driver(hid_accel_3d_platform_driver);
+
+MODULE_DESCRIPTION("HID Sensor Accel 3D");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/iio/accel/kxcjk-1013.c b/kernel/drivers/iio/accel/kxcjk-1013.c
new file mode 100644
index 000000000..5b7a860df
--- /dev/null
+++ b/kernel/drivers/iio/accel/kxcjk-1013.c
@@ -0,0 +1,1452 @@
+/*
+ * KXCJK-1013 3-axis accelerometer driver
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/acpi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/events.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/accel/kxcjk_1013.h>
+
+#define KXCJK1013_DRV_NAME "kxcjk1013"
+#define KXCJK1013_IRQ_NAME "kxcjk1013_event"
+
+#define KXCJK1013_REG_XOUT_L		0x06
+/*
+ * From low byte X axis register, all the other addresses of Y and Z can be
+ * obtained by just applying axis offset. The following axis defines are just
+ * provide clarity, but not used.
+ */
+#define KXCJK1013_REG_XOUT_H		0x07
+#define KXCJK1013_REG_YOUT_L		0x08
+#define KXCJK1013_REG_YOUT_H		0x09
+#define KXCJK1013_REG_ZOUT_L		0x0A
+#define KXCJK1013_REG_ZOUT_H		0x0B
+
+#define KXCJK1013_REG_DCST_RESP		0x0C
+#define KXCJK1013_REG_WHO_AM_I		0x0F
+#define KXCJK1013_REG_INT_SRC1		0x16
+#define KXCJK1013_REG_INT_SRC2		0x17
+#define KXCJK1013_REG_STATUS_REG	0x18
+#define KXCJK1013_REG_INT_REL		0x1A
+#define KXCJK1013_REG_CTRL1		0x1B
+#define KXCJK1013_REG_CTRL2		0x1D
+#define KXCJK1013_REG_INT_CTRL1		0x1E
+#define KXCJK1013_REG_INT_CTRL2		0x1F
+#define KXCJK1013_REG_DATA_CTRL		0x21
+#define KXCJK1013_REG_WAKE_TIMER	0x29
+#define KXCJK1013_REG_SELF_TEST		0x3A
+#define KXCJK1013_REG_WAKE_THRES	0x6A
+
+#define KXCJK1013_REG_CTRL1_BIT_PC1	BIT(7)
+#define KXCJK1013_REG_CTRL1_BIT_RES	BIT(6)
+#define KXCJK1013_REG_CTRL1_BIT_DRDY	BIT(5)
+#define KXCJK1013_REG_CTRL1_BIT_GSEL1	BIT(4)
+#define KXCJK1013_REG_CTRL1_BIT_GSEL0	BIT(3)
+#define KXCJK1013_REG_CTRL1_BIT_WUFE	BIT(1)
+#define KXCJK1013_REG_INT_REG1_BIT_IEA	BIT(4)
+#define KXCJK1013_REG_INT_REG1_BIT_IEN	BIT(5)
+
+#define KXCJK1013_DATA_MASK_12_BIT	0x0FFF
+#define KXCJK1013_MAX_STARTUP_TIME_US	100000
+
+#define KXCJK1013_SLEEP_DELAY_MS	2000
+
+#define KXCJK1013_REG_INT_SRC2_BIT_ZP	BIT(0)
+#define KXCJK1013_REG_INT_SRC2_BIT_ZN	BIT(1)
+#define KXCJK1013_REG_INT_SRC2_BIT_YP	BIT(2)
+#define KXCJK1013_REG_INT_SRC2_BIT_YN	BIT(3)
+#define KXCJK1013_REG_INT_SRC2_BIT_XP	BIT(4)
+#define KXCJK1013_REG_INT_SRC2_BIT_XN	BIT(5)
+
+#define KXCJK1013_DEFAULT_WAKE_THRES	1
+
+enum kx_chipset {
+	KXCJK1013,
+	KXCJ91008,
+	KXTJ21009,
+	KX_MAX_CHIPS /* this must be last */
+};
+
+struct kxcjk1013_data {
+	struct i2c_client *client;
+	struct iio_trigger *dready_trig;
+	struct iio_trigger *motion_trig;
+	struct mutex mutex;
+	s16 buffer[8];
+	u8 odr_bits;
+	u8 range;
+	int wake_thres;
+	int wake_dur;
+	bool active_high_intr;
+	bool dready_trigger_on;
+	int ev_enable_state;
+	bool motion_trigger_on;
+	int64_t timestamp;
+	enum kx_chipset chipset;
+	bool is_smo8500_device;
+};
+
+enum kxcjk1013_axis {
+	AXIS_X,
+	AXIS_Y,
+	AXIS_Z,
+};
+
+enum kxcjk1013_mode {
+	STANDBY,
+	OPERATION,
+};
+
+enum kxcjk1013_range {
+	KXCJK1013_RANGE_2G,
+	KXCJK1013_RANGE_4G,
+	KXCJK1013_RANGE_8G,
+};
+
+static const struct {
+	int val;
+	int val2;
+	int odr_bits;
+} samp_freq_table[] = { {0, 781000, 0x08}, {1, 563000, 0x09},
+			{3, 125000, 0x0A}, {6, 250000, 0x0B}, {12, 500000, 0},
+			{25, 0, 0x01}, {50, 0, 0x02}, {100, 0, 0x03},
+			{200, 0, 0x04}, {400, 0, 0x05}, {800, 0, 0x06},
+			{1600, 0, 0x07} };
+
+/* Refer to section 4 of the specification */
+static const struct {
+	int odr_bits;
+	int usec;
+} odr_start_up_times[KX_MAX_CHIPS][12] = {
+	/* KXCJK-1013 */
+	{
+		{0x08, 100000},
+		{0x09, 100000},
+		{0x0A, 100000},
+		{0x0B, 100000},
+		{0, 80000},
+		{0x01, 41000},
+		{0x02, 21000},
+		{0x03, 11000},
+		{0x04, 6400},
+		{0x05, 3900},
+		{0x06, 2700},
+		{0x07, 2100},
+	},
+	/* KXCJ9-1008 */
+	{
+		{0x08, 100000},
+		{0x09, 100000},
+		{0x0A, 100000},
+		{0x0B, 100000},
+		{0, 80000},
+		{0x01, 41000},
+		{0x02, 21000},
+		{0x03, 11000},
+		{0x04, 6400},
+		{0x05, 3900},
+		{0x06, 2700},
+		{0x07, 2100},
+	},
+	/* KXCTJ2-1009 */
+	{
+		{0x08, 1240000},
+		{0x09, 621000},
+		{0x0A, 309000},
+		{0x0B, 151000},
+		{0, 80000},
+		{0x01, 41000},
+		{0x02, 21000},
+		{0x03, 11000},
+		{0x04, 6000},
+		{0x05, 4000},
+		{0x06, 3000},
+		{0x07, 2000},
+	},
+};
+
+static const struct {
+	u16 scale;
+	u8 gsel_0;
+	u8 gsel_1;
+} KXCJK1013_scale_table[] = { {9582, 0, 0},
+			      {19163, 1, 0},
+			      {38326, 0, 1} };
+
+static const struct {
+	int val;
+	int val2;
+	int odr_bits;
+} wake_odr_data_rate_table[] = { {0, 781000, 0x00},
+				 {1, 563000, 0x01},
+				 {3, 125000, 0x02},
+				 {6, 250000, 0x03},
+				 {12, 500000, 0x04},
+				 {25, 0, 0x05},
+				 {50, 0, 0x06},
+				 {100, 0, 0x06},
+				 {200, 0, 0x06},
+				 {400, 0, 0x06},
+				 {800, 0, 0x06},
+				 {1600, 0, 0x06} };
+
+static int kxcjk1013_set_mode(struct kxcjk1013_data *data,
+			      enum kxcjk1013_mode mode)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	if (mode == STANDBY)
+		ret &= ~KXCJK1013_REG_CTRL1_BIT_PC1;
+	else
+		ret |= KXCJK1013_REG_CTRL1_BIT_PC1;
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					KXCJK1013_REG_CTRL1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int kxcjk1013_get_mode(struct kxcjk1013_data *data,
+			      enum kxcjk1013_mode *mode)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	if (ret & KXCJK1013_REG_CTRL1_BIT_PC1)
+		*mode = OPERATION;
+	else
+		*mode = STANDBY;
+
+	return 0;
+}
+
+static int kxcjk1013_set_range(struct kxcjk1013_data *data, int range_index)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	ret &= ~(KXCJK1013_REG_CTRL1_BIT_GSEL0 |
+		 KXCJK1013_REG_CTRL1_BIT_GSEL1);
+	ret |= (KXCJK1013_scale_table[range_index].gsel_0 << 3);
+	ret |= (KXCJK1013_scale_table[range_index].gsel_1 << 4);
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					KXCJK1013_REG_CTRL1,
+					ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+		return ret;
+	}
+
+	data->range = range_index;
+
+	return 0;
+}
+
+static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_WHO_AM_I);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading who_am_i\n");
+		return ret;
+	}
+
+	dev_dbg(&data->client->dev, "KXCJK1013 Chip Id %x\n", ret);
+
+	ret = kxcjk1013_set_mode(data, STANDBY);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	/* Set 12 bit mode */
+	ret |= KXCJK1013_REG_CTRL1_BIT_RES;
+
+	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL1,
+					ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl\n");
+		return ret;
+	}
+
+	/* Setting range to 4G */
+	ret = kxcjk1013_set_range(data, KXCJK1013_RANGE_4G);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_DATA_CTRL);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_data_ctrl\n");
+		return ret;
+	}
+
+	data->odr_bits = ret;
+
+	/* Set up INT polarity */
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
+		return ret;
+	}
+
+	if (data->active_high_intr)
+		ret |= KXCJK1013_REG_INT_REG1_BIT_IEA;
+	else
+		ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEA;
+
+	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
+					ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
+		return ret;
+	}
+
+	ret = kxcjk1013_set_mode(data, OPERATION);
+	if (ret < 0)
+		return ret;
+
+	data->wake_thres = KXCJK1013_DEFAULT_WAKE_THRES;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int kxcjk1013_get_startup_times(struct kxcjk1013_data *data)
+{
+	int i;
+	int idx = data->chipset;
+
+	for (i = 0; i < ARRAY_SIZE(odr_start_up_times[idx]); ++i) {
+		if (odr_start_up_times[idx][i].odr_bits == data->odr_bits)
+			return odr_start_up_times[idx][i].usec;
+	}
+
+	return KXCJK1013_MAX_STARTUP_TIME_US;
+}
+#endif
+
+static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on)
+{
+#ifdef CONFIG_PM
+	int ret;
+
+	if (on)
+		ret = pm_runtime_get_sync(&data->client->dev);
+	else {
+		pm_runtime_mark_last_busy(&data->client->dev);
+		ret = pm_runtime_put_autosuspend(&data->client->dev);
+	}
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"Failed: kxcjk1013_set_power_state for %d\n", on);
+		if (on)
+			pm_runtime_put_noidle(&data->client->dev);
+		return ret;
+	}
+#endif
+
+	return 0;
+}
+
+static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					KXCJK1013_REG_WAKE_TIMER,
+					data->wake_dur);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"Error writing reg_wake_timer\n");
+		return ret;
+	}
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					KXCJK1013_REG_WAKE_THRES,
+					data->wake_thres);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_wake_thres\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int kxcjk1013_setup_any_motion_interrupt(struct kxcjk1013_data *data,
+						bool status)
+{
+	int ret;
+	enum kxcjk1013_mode store_mode;
+
+	ret = kxcjk1013_get_mode(data, &store_mode);
+	if (ret < 0)
+		return ret;
+
+	/* This is requirement by spec to change state to STANDBY */
+	ret = kxcjk1013_set_mode(data, STANDBY);
+	if (ret < 0)
+		return ret;
+
+	ret = kxcjk1013_chip_update_thresholds(data);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
+		return ret;
+	}
+
+	if (status)
+		ret |= KXCJK1013_REG_INT_REG1_BIT_IEN;
+	else
+		ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEN;
+
+	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
+					ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	if (status)
+		ret |= KXCJK1013_REG_CTRL1_BIT_WUFE;
+	else
+		ret &= ~KXCJK1013_REG_CTRL1_BIT_WUFE;
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					KXCJK1013_REG_CTRL1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+		return ret;
+	}
+
+	if (store_mode == OPERATION) {
+		ret = kxcjk1013_set_mode(data, OPERATION);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int kxcjk1013_setup_new_data_interrupt(struct kxcjk1013_data *data,
+					      bool status)
+{
+	int ret;
+	enum kxcjk1013_mode store_mode;
+
+	ret = kxcjk1013_get_mode(data, &store_mode);
+	if (ret < 0)
+		return ret;
+
+	/* This is requirement by spec to change state to STANDBY */
+	ret = kxcjk1013_set_mode(data, STANDBY);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
+		return ret;
+	}
+
+	if (status)
+		ret |= KXCJK1013_REG_INT_REG1_BIT_IEN;
+	else
+		ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEN;
+
+	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
+					ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	if (status)
+		ret |= KXCJK1013_REG_CTRL1_BIT_DRDY;
+	else
+		ret &= ~KXCJK1013_REG_CTRL1_BIT_DRDY;
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					KXCJK1013_REG_CTRL1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+		return ret;
+	}
+
+	if (store_mode == OPERATION) {
+		ret = kxcjk1013_set_mode(data, OPERATION);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int kxcjk1013_convert_freq_to_bit(int val, int val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(samp_freq_table); ++i) {
+		if (samp_freq_table[i].val == val &&
+			samp_freq_table[i].val2 == val2) {
+			return samp_freq_table[i].odr_bits;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int kxcjk1013_convert_wake_odr_to_bit(int val, int val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wake_odr_data_rate_table); ++i) {
+		if (wake_odr_data_rate_table[i].val == val &&
+			wake_odr_data_rate_table[i].val2 == val2) {
+			return wake_odr_data_rate_table[i].odr_bits;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2)
+{
+	int ret;
+	int odr_bits;
+	enum kxcjk1013_mode store_mode;
+
+	ret = kxcjk1013_get_mode(data, &store_mode);
+	if (ret < 0)
+		return ret;
+
+	odr_bits = kxcjk1013_convert_freq_to_bit(val, val2);
+	if (odr_bits < 0)
+		return odr_bits;
+
+	/* To change ODR, the chip must be set to STANDBY as per spec */
+	ret = kxcjk1013_set_mode(data, STANDBY);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_DATA_CTRL,
+					odr_bits);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing data_ctrl\n");
+		return ret;
+	}
+
+	data->odr_bits = odr_bits;
+
+	odr_bits = kxcjk1013_convert_wake_odr_to_bit(val, val2);
+	if (odr_bits < 0)
+		return odr_bits;
+
+	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL2,
+					odr_bits);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_ctrl2\n");
+		return ret;
+	}
+
+	if (store_mode == OPERATION) {
+		ret = kxcjk1013_set_mode(data, OPERATION);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int kxcjk1013_get_odr(struct kxcjk1013_data *data, int *val, int *val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(samp_freq_table); ++i) {
+		if (samp_freq_table[i].odr_bits == data->odr_bits) {
+			*val = samp_freq_table[i].val;
+			*val2 = samp_freq_table[i].val2;
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int kxcjk1013_get_acc_reg(struct kxcjk1013_data *data, int axis)
+{
+	u8 reg = KXCJK1013_REG_XOUT_L + axis * 2;
+	int ret;
+
+	ret = i2c_smbus_read_word_data(data->client, reg);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"failed to read accel_%c registers\n", 'x' + axis);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int kxcjk1013_set_scale(struct kxcjk1013_data *data, int val)
+{
+	int ret, i;
+	enum kxcjk1013_mode store_mode;
+
+
+	for (i = 0; i < ARRAY_SIZE(KXCJK1013_scale_table); ++i) {
+		if (KXCJK1013_scale_table[i].scale == val) {
+
+			ret = kxcjk1013_get_mode(data, &store_mode);
+			if (ret < 0)
+				return ret;
+
+			ret = kxcjk1013_set_mode(data, STANDBY);
+			if (ret < 0)
+				return ret;
+
+			ret = kxcjk1013_set_range(data, i);
+			if (ret < 0)
+				return ret;
+
+			if (store_mode == OPERATION) {
+				ret = kxcjk1013_set_mode(data, OPERATION);
+				if (ret)
+					return ret;
+			}
+
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int kxcjk1013_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan, int *val,
+			      int *val2, long mask)
+{
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->mutex);
+		if (iio_buffer_enabled(indio_dev))
+			ret = -EBUSY;
+		else {
+			ret = kxcjk1013_set_power_state(data, true);
+			if (ret < 0) {
+				mutex_unlock(&data->mutex);
+				return ret;
+			}
+			ret = kxcjk1013_get_acc_reg(data, chan->scan_index);
+			if (ret < 0) {
+				kxcjk1013_set_power_state(data, false);
+				mutex_unlock(&data->mutex);
+				return ret;
+			}
+			*val = sign_extend32(ret >> 4, 11);
+			ret = kxcjk1013_set_power_state(data, false);
+		}
+		mutex_unlock(&data->mutex);
+
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = KXCJK1013_scale_table[data->range].scale;
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		mutex_lock(&data->mutex);
+		ret = kxcjk1013_get_odr(data, val, val2);
+		mutex_unlock(&data->mutex);
+		return ret;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int kxcjk1013_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan, int val,
+			       int val2, long mask)
+{
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		mutex_lock(&data->mutex);
+		ret = kxcjk1013_set_odr(data, val, val2);
+		mutex_unlock(&data->mutex);
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		if (val)
+			return -EINVAL;
+
+		mutex_lock(&data->mutex);
+		ret = kxcjk1013_set_scale(data, val2);
+		mutex_unlock(&data->mutex);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int kxcjk1013_read_event(struct iio_dev *indio_dev,
+				   const struct iio_chan_spec *chan,
+				   enum iio_event_type type,
+				   enum iio_event_direction dir,
+				   enum iio_event_info info,
+				   int *val, int *val2)
+{
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+
+	*val2 = 0;
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		*val = data->wake_thres;
+		break;
+	case IIO_EV_INFO_PERIOD:
+		*val = data->wake_dur;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return IIO_VAL_INT;
+}
+
+static int kxcjk1013_write_event(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    enum iio_event_info info,
+				    int val, int val2)
+{
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+
+	if (data->ev_enable_state)
+		return -EBUSY;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		data->wake_thres = val;
+		break;
+	case IIO_EV_INFO_PERIOD:
+		data->wake_dur = val;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int kxcjk1013_read_event_config(struct iio_dev *indio_dev,
+					  const struct iio_chan_spec *chan,
+					  enum iio_event_type type,
+					  enum iio_event_direction dir)
+{
+
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+
+	return data->ev_enable_state;
+}
+
+static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,
+					   const struct iio_chan_spec *chan,
+					   enum iio_event_type type,
+					   enum iio_event_direction dir,
+					   int state)
+{
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (state && data->ev_enable_state)
+		return 0;
+
+	mutex_lock(&data->mutex);
+
+	if (!state && data->motion_trigger_on) {
+		data->ev_enable_state = 0;
+		mutex_unlock(&data->mutex);
+		return 0;
+	}
+
+	/*
+	 * We will expect the enable and disable to do operation in
+	 * in reverse order. This will happen here anyway as our
+	 * resume operation uses sync mode runtime pm calls, the
+	 * suspend operation will be delayed by autosuspend delay
+	 * So the disable operation will still happen in reverse of
+	 * enable operation. When runtime pm is disabled the mode
+	 * is always on so sequence doesn't matter
+	 */
+	ret = kxcjk1013_set_power_state(data, state);
+	if (ret < 0) {
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+
+	ret =  kxcjk1013_setup_any_motion_interrupt(data, state);
+	if (ret < 0) {
+		kxcjk1013_set_power_state(data, false);
+		data->ev_enable_state = 0;
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+
+	data->ev_enable_state = state;
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static int kxcjk1013_validate_trigger(struct iio_dev *indio_dev,
+				      struct iio_trigger *trig)
+{
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+
+	if (data->dready_trig != trig && data->motion_trig != trig)
+		return -EINVAL;
+
+	return 0;
+}
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
+	"0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800 1600");
+
+static IIO_CONST_ATTR(in_accel_scale_available, "0.009582 0.019163 0.038326");
+
+static struct attribute *kxcjk1013_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_accel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group kxcjk1013_attrs_group = {
+	.attrs = kxcjk1013_attributes,
+};
+
+static const struct iio_event_spec kxcjk1013_event = {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+				 BIT(IIO_EV_INFO_ENABLE) |
+				 BIT(IIO_EV_INFO_PERIOD)
+};
+
+#define KXCJK1013_CHANNEL(_axis) {					\
+	.type = IIO_ACCEL,						\
+	.modified = 1,							\
+	.channel2 = IIO_MOD_##_axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
+				BIT(IIO_CHAN_INFO_SAMP_FREQ),		\
+	.scan_index = AXIS_##_axis,					\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 12,						\
+		.storagebits = 16,					\
+		.shift = 4,						\
+		.endianness = IIO_CPU,					\
+	},								\
+	.event_spec = &kxcjk1013_event,				\
+	.num_event_specs = 1						\
+}
+
+static const struct iio_chan_spec kxcjk1013_channels[] = {
+	KXCJK1013_CHANNEL(X),
+	KXCJK1013_CHANNEL(Y),
+	KXCJK1013_CHANNEL(Z),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct iio_info kxcjk1013_info = {
+	.attrs			= &kxcjk1013_attrs_group,
+	.read_raw		= kxcjk1013_read_raw,
+	.write_raw		= kxcjk1013_write_raw,
+	.read_event_value	= kxcjk1013_read_event,
+	.write_event_value	= kxcjk1013_write_event,
+	.write_event_config	= kxcjk1013_write_event_config,
+	.read_event_config	= kxcjk1013_read_event_config,
+	.validate_trigger	= kxcjk1013_validate_trigger,
+	.driver_module		= THIS_MODULE,
+};
+
+static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int bit, ret, i = 0;
+
+	mutex_lock(&data->mutex);
+
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		ret = kxcjk1013_get_acc_reg(data, bit);
+		if (ret < 0) {
+			mutex_unlock(&data->mutex);
+			goto err;
+		}
+		data->buffer[i++] = ret;
+	}
+	mutex_unlock(&data->mutex);
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+					   data->timestamp);
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int kxcjk1013_trig_try_reen(struct iio_trigger *trig)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_int_rel\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig,
+						bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	if (!state && data->ev_enable_state && data->motion_trigger_on) {
+		data->motion_trigger_on = false;
+		mutex_unlock(&data->mutex);
+		return 0;
+	}
+
+	ret = kxcjk1013_set_power_state(data, state);
+	if (ret < 0) {
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+	if (data->motion_trig == trig)
+		ret = kxcjk1013_setup_any_motion_interrupt(data, state);
+	else
+		ret = kxcjk1013_setup_new_data_interrupt(data, state);
+	if (ret < 0) {
+		kxcjk1013_set_power_state(data, false);
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+	if (data->motion_trig == trig)
+		data->motion_trigger_on = state;
+	else
+		data->dready_trigger_on = state;
+
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static const struct iio_trigger_ops kxcjk1013_trigger_ops = {
+	.set_trigger_state = kxcjk1013_data_rdy_trigger_set_state,
+	.try_reenable = kxcjk1013_trig_try_reen,
+	.owner = THIS_MODULE,
+};
+
+static irqreturn_t kxcjk1013_event_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_SRC1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_int_src1\n");
+		goto ack_intr;
+	}
+
+	if (ret & 0x02) {
+		ret = i2c_smbus_read_byte_data(data->client,
+					       KXCJK1013_REG_INT_SRC2);
+		if (ret < 0) {
+			dev_err(&data->client->dev,
+				"Error reading reg_int_src2\n");
+			goto ack_intr;
+		}
+
+		if (ret & KXCJK1013_REG_INT_SRC2_BIT_XN)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_X,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_FALLING),
+				       data->timestamp);
+		if (ret & KXCJK1013_REG_INT_SRC2_BIT_XP)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_X,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_RISING),
+				       data->timestamp);
+
+
+		if (ret & KXCJK1013_REG_INT_SRC2_BIT_YN)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Y,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_FALLING),
+				       data->timestamp);
+		if (ret & KXCJK1013_REG_INT_SRC2_BIT_YP)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Y,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_RISING),
+				       data->timestamp);
+
+		if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZN)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Z,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_FALLING),
+				       data->timestamp);
+		if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZP)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Z,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_RISING),
+				       data->timestamp);
+	}
+
+ack_intr:
+	if (data->dready_trigger_on)
+		return IRQ_HANDLED;
+
+	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error reading reg_int_rel\n");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+
+	data->timestamp = iio_get_time_ns();
+
+	if (data->dready_trigger_on)
+		iio_trigger_poll(data->dready_trig);
+	else if (data->motion_trigger_on)
+		iio_trigger_poll(data->motion_trig);
+
+	if (data->ev_enable_state)
+		return IRQ_WAKE_THREAD;
+	else
+		return IRQ_HANDLED;
+}
+
+static const char *kxcjk1013_match_acpi_device(struct device *dev,
+					       enum kx_chipset *chipset,
+					       bool *is_smo8500_device)
+{
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(dev->driver->acpi_match_table, dev);
+	if (!id)
+		return NULL;
+	if (strcmp(id->id, "SMO8500") == 0)
+		*is_smo8500_device = true;
+	*chipset = (enum kx_chipset)id->driver_data;
+
+	return dev_name(dev);
+}
+
+static int kxcjk1013_gpio_probe(struct i2c_client *client,
+				struct kxcjk1013_data *data)
+{
+	struct device *dev;
+	struct gpio_desc *gpio;
+	int ret;
+
+	if (!client)
+		return -EINVAL;
+	if (data->is_smo8500_device)
+		return -ENOTSUPP;
+
+	dev = &client->dev;
+
+	/* data ready gpio interrupt pin */
+	gpio = devm_gpiod_get_index(dev, "kxcjk1013_int", 0, GPIOD_IN);
+	if (IS_ERR(gpio)) {
+		dev_err(dev, "acpi gpio get index failed\n");
+		return PTR_ERR(gpio);
+	}
+
+	ret = gpiod_to_irq(gpio);
+
+	dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
+
+	return ret;
+}
+
+static int kxcjk1013_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct kxcjk1013_data *data;
+	struct iio_dev *indio_dev;
+	struct kxcjk_1013_platform_data *pdata;
+	const char *name;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (pdata)
+		data->active_high_intr = pdata->active_high_intr;
+	else
+		data->active_high_intr = true; /* default polarity */
+
+	if (id) {
+		data->chipset = (enum kx_chipset)(id->driver_data);
+		name = id->name;
+	} else if (ACPI_HANDLE(&client->dev)) {
+		name = kxcjk1013_match_acpi_device(&client->dev,
+						   &data->chipset,
+						   &data->is_smo8500_device);
+	} else
+		return -ENODEV;
+
+	ret = kxcjk1013_chip_init(data);
+	if (ret < 0)
+		return ret;
+
+	mutex_init(&data->mutex);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = kxcjk1013_channels;
+	indio_dev->num_channels = ARRAY_SIZE(kxcjk1013_channels);
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &kxcjk1013_info;
+
+	if (client->irq < 0)
+		client->irq = kxcjk1013_gpio_probe(client, data);
+
+	if (client->irq >= 0) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						kxcjk1013_data_rdy_trig_poll,
+						kxcjk1013_event_handler,
+						IRQF_TRIGGER_RISING,
+						KXCJK1013_IRQ_NAME,
+						indio_dev);
+		if (ret)
+			goto err_poweroff;
+
+		data->dready_trig = devm_iio_trigger_alloc(&client->dev,
+							   "%s-dev%d",
+							   indio_dev->name,
+							   indio_dev->id);
+		if (!data->dready_trig) {
+			ret = -ENOMEM;
+			goto err_poweroff;
+		}
+
+		data->motion_trig = devm_iio_trigger_alloc(&client->dev,
+							  "%s-any-motion-dev%d",
+							  indio_dev->name,
+							  indio_dev->id);
+		if (!data->motion_trig) {
+			ret = -ENOMEM;
+			goto err_poweroff;
+		}
+
+		data->dready_trig->dev.parent = &client->dev;
+		data->dready_trig->ops = &kxcjk1013_trigger_ops;
+		iio_trigger_set_drvdata(data->dready_trig, indio_dev);
+		indio_dev->trig = data->dready_trig;
+		iio_trigger_get(indio_dev->trig);
+		ret = iio_trigger_register(data->dready_trig);
+		if (ret)
+			goto err_poweroff;
+
+		data->motion_trig->dev.parent = &client->dev;
+		data->motion_trig->ops = &kxcjk1013_trigger_ops;
+		iio_trigger_set_drvdata(data->motion_trig, indio_dev);
+		ret = iio_trigger_register(data->motion_trig);
+		if (ret) {
+			data->motion_trig = NULL;
+			goto err_trigger_unregister;
+		}
+
+		ret = iio_triggered_buffer_setup(indio_dev,
+						&iio_pollfunc_store_time,
+						kxcjk1013_trigger_handler,
+						NULL);
+		if (ret < 0) {
+			dev_err(&client->dev,
+					"iio triggered buffer setup failed\n");
+			goto err_trigger_unregister;
+		}
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to register iio device\n");
+		goto err_buffer_cleanup;
+	}
+
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret)
+		goto err_iio_unregister;
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev,
+					 KXCJK1013_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	return 0;
+
+err_iio_unregister:
+	iio_device_unregister(indio_dev);
+err_buffer_cleanup:
+	if (data->dready_trig)
+		iio_triggered_buffer_cleanup(indio_dev);
+err_trigger_unregister:
+	if (data->dready_trig)
+		iio_trigger_unregister(data->dready_trig);
+	if (data->motion_trig)
+		iio_trigger_unregister(data->motion_trig);
+err_poweroff:
+	kxcjk1013_set_mode(data, STANDBY);
+
+	return ret;
+}
+
+static int kxcjk1013_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_put_noidle(&client->dev);
+
+	iio_device_unregister(indio_dev);
+
+	if (data->dready_trig) {
+		iio_triggered_buffer_cleanup(indio_dev);
+		iio_trigger_unregister(data->dready_trig);
+		iio_trigger_unregister(data->motion_trig);
+	}
+
+	mutex_lock(&data->mutex);
+	kxcjk1013_set_mode(data, STANDBY);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int kxcjk1013_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = kxcjk1013_set_mode(data, STANDBY);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int kxcjk1013_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int ret = 0;
+
+	mutex_lock(&data->mutex);
+	ret = kxcjk1013_set_mode(data, OPERATION);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_PM
+static int kxcjk1013_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = kxcjk1013_set_mode(data, STANDBY);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "powering off device failed\n");
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+static int kxcjk1013_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int ret;
+	int sleep_val;
+
+	ret = kxcjk1013_set_mode(data, OPERATION);
+	if (ret < 0)
+		return ret;
+
+	sleep_val = kxcjk1013_get_startup_times(data);
+	if (sleep_val < 20000)
+		usleep_range(sleep_val, 20000);
+	else
+		msleep_interruptible(sleep_val/1000);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops kxcjk1013_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(kxcjk1013_suspend, kxcjk1013_resume)
+	SET_RUNTIME_PM_OPS(kxcjk1013_runtime_suspend,
+			   kxcjk1013_runtime_resume, NULL)
+};
+
+static const struct acpi_device_id kx_acpi_match[] = {
+	{"KXCJ1013", KXCJK1013},
+	{"KXCJ1008", KXCJ91008},
+	{"KXCJ9000", KXCJ91008},
+	{"KXTJ1009", KXTJ21009},
+	{"SMO8500",  KXCJ91008},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, kx_acpi_match);
+
+static const struct i2c_device_id kxcjk1013_id[] = {
+	{"kxcjk1013", KXCJK1013},
+	{"kxcj91008", KXCJ91008},
+	{"kxtj21009", KXTJ21009},
+	{"SMO8500",   KXCJ91008},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, kxcjk1013_id);
+
+static struct i2c_driver kxcjk1013_driver = {
+	.driver = {
+		.name	= KXCJK1013_DRV_NAME,
+		.acpi_match_table = ACPI_PTR(kx_acpi_match),
+		.pm	= &kxcjk1013_pm_ops,
+	},
+	.probe		= kxcjk1013_probe,
+	.remove		= kxcjk1013_remove,
+	.id_table	= kxcjk1013_id,
+};
+module_i2c_driver(kxcjk1013_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("KXCJK1013 accelerometer driver");
diff --git a/kernel/drivers/iio/accel/kxsd9.c b/kernel/drivers/iio/accel/kxsd9.c
new file mode 100644
index 000000000..98ba761cb
--- /dev/null
+++ b/kernel/drivers/iio/accel/kxsd9.c
@@ -0,0 +1,276 @@
+/*
+ * kxsd9.c	simple support for the Kionix KXSD9 3D
+ *		accelerometer.
+ *
+ * Copyright (c) 2008-2009 Jonathan Cameron <jic23@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The i2c interface is very similar, so shouldn't be a problem once
+ * I have a suitable wire made up.
+ *
+ * TODO:	Support the motion detector
+ *		Uses register address incrementing so could have a
+ *		heavily optimized ring buffer access function.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define KXSD9_REG_X		0x00
+#define KXSD9_REG_Y		0x02
+#define KXSD9_REG_Z		0x04
+#define KXSD9_REG_AUX		0x06
+#define KXSD9_REG_RESET		0x0a
+#define KXSD9_REG_CTRL_C	0x0c
+
+#define KXSD9_FS_MASK		0x03
+
+#define KXSD9_REG_CTRL_B	0x0d
+#define KXSD9_REG_CTRL_A	0x0e
+
+#define KXSD9_READ(a) (0x80 | (a))
+#define KXSD9_WRITE(a) (a)
+
+#define KXSD9_STATE_RX_SIZE 2
+#define KXSD9_STATE_TX_SIZE 2
+/**
+ * struct kxsd9_state - device related storage
+ * @buf_lock:	protect the rx and tx buffers.
+ * @us:		spi device
+ * @rx:		single rx buffer storage
+ * @tx:		single tx buffer storage
+ **/
+struct kxsd9_state {
+	struct mutex buf_lock;
+	struct spi_device *us;
+	u8 rx[KXSD9_STATE_RX_SIZE] ____cacheline_aligned;
+	u8 tx[KXSD9_STATE_TX_SIZE];
+};
+
+#define KXSD9_SCALE_2G "0.011978"
+#define KXSD9_SCALE_4G "0.023927"
+#define KXSD9_SCALE_6G "0.035934"
+#define KXSD9_SCALE_8G "0.047853"
+
+/* reverse order */
+static const int kxsd9_micro_scales[4] = { 47853, 35934, 23927, 11978 };
+
+static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro)
+{
+	int ret, i;
+	struct kxsd9_state *st = iio_priv(indio_dev);
+	bool foundit = false;
+
+	for (i = 0; i < 4; i++)
+		if (micro == kxsd9_micro_scales[i]) {
+			foundit = true;
+			break;
+		}
+	if (!foundit)
+		return -EINVAL;
+
+	mutex_lock(&st->buf_lock);
+	ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
+	if (ret)
+		goto error_ret;
+	st->tx[0] = KXSD9_WRITE(KXSD9_REG_CTRL_C);
+	st->tx[1] = (ret & ~KXSD9_FS_MASK) | i;
+
+	ret = spi_write(st->us, st->tx, 2);
+error_ret:
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
+static int kxsd9_read(struct iio_dev *indio_dev, u8 address)
+{
+	int ret;
+	struct kxsd9_state *st = iio_priv(indio_dev);
+	struct spi_transfer xfers[] = {
+		{
+			.bits_per_word = 8,
+			.len = 1,
+			.delay_usecs = 200,
+			.tx_buf = st->tx,
+		}, {
+			.bits_per_word = 8,
+			.len = 2,
+			.rx_buf = st->rx,
+		},
+	};
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = KXSD9_READ(address);
+	ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
+	if (!ret)
+		ret = (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
+static IIO_CONST_ATTR(accel_scale_available,
+		KXSD9_SCALE_2G " "
+		KXSD9_SCALE_4G " "
+		KXSD9_SCALE_6G " "
+		KXSD9_SCALE_8G);
+
+static struct attribute *kxsd9_attributes[] = {
+	&iio_const_attr_accel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static int kxsd9_write_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int val,
+			   int val2,
+			   long mask)
+{
+	int ret = -EINVAL;
+
+	if (mask == IIO_CHAN_INFO_SCALE) {
+		/* Check no integer component */
+		if (val)
+			return -EINVAL;
+		ret = kxsd9_write_scale(indio_dev, val2);
+	}
+
+	return ret;
+}
+
+static int kxsd9_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	int ret = -EINVAL;
+	struct kxsd9_state *st = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = kxsd9_read(indio_dev, chan->address);
+		if (ret < 0)
+			goto error_ret;
+		*val = ret;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
+		if (ret)
+			goto error_ret;
+		*val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK];
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	}
+
+error_ret:
+	return ret;
+};
+#define KXSD9_ACCEL_CHAN(axis)						\
+	{								\
+		.type = IIO_ACCEL,					\
+		.modified = 1,						\
+		.channel2 = IIO_MOD_##axis,				\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+		.address = KXSD9_REG_##axis,				\
+	}
+
+static const struct iio_chan_spec kxsd9_channels[] = {
+	KXSD9_ACCEL_CHAN(X), KXSD9_ACCEL_CHAN(Y), KXSD9_ACCEL_CHAN(Z),
+	{
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.indexed = 1,
+		.address = KXSD9_REG_AUX,
+	}
+};
+
+static const struct attribute_group kxsd9_attribute_group = {
+	.attrs = kxsd9_attributes,
+};
+
+static int kxsd9_power_up(struct kxsd9_state *st)
+{
+	int ret;
+
+	st->tx[0] = 0x0d;
+	st->tx[1] = 0x40;
+	ret = spi_write(st->us, st->tx, 2);
+	if (ret)
+		return ret;
+
+	st->tx[0] = 0x0c;
+	st->tx[1] = 0x9b;
+	return spi_write(st->us, st->tx, 2);
+};
+
+static const struct iio_info kxsd9_info = {
+	.read_raw = &kxsd9_read_raw,
+	.write_raw = &kxsd9_write_raw,
+	.attrs = &kxsd9_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+static int kxsd9_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct kxsd9_state *st;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	spi_set_drvdata(spi, indio_dev);
+
+	st->us = spi;
+	mutex_init(&st->buf_lock);
+	indio_dev->channels = kxsd9_channels;
+	indio_dev->num_channels = ARRAY_SIZE(kxsd9_channels);
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->info = &kxsd9_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	spi->mode = SPI_MODE_0;
+	spi_setup(spi);
+	kxsd9_power_up(st);
+
+	return iio_device_register(indio_dev);
+}
+
+static int kxsd9_remove(struct spi_device *spi)
+{
+	iio_device_unregister(spi_get_drvdata(spi));
+
+	return 0;
+}
+
+static const struct spi_device_id kxsd9_id[] = {
+	{"kxsd9", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, kxsd9_id);
+
+static struct spi_driver kxsd9_driver = {
+	.driver = {
+		.name = "kxsd9",
+		.owner = THIS_MODULE,
+	},
+	.probe = kxsd9_probe,
+	.remove = kxsd9_remove,
+	.id_table = kxsd9_id,
+};
+module_spi_driver(kxsd9_driver);
+
+MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
+MODULE_DESCRIPTION("Kionix KXSD9 SPI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/iio/accel/mma8452.c b/kernel/drivers/iio/accel/mma8452.c
new file mode 100644
index 000000000..5b8065788
--- /dev/null
+++ b/kernel/drivers/iio/accel/mma8452.c
@@ -0,0 +1,451 @@
+/*
+ * mma8452.c - Support for Freescale MMA8452Q 3-axis 12-bit accelerometer
+ *
+ * Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * 7-bit I2C slave address 0x1c/0x1d (pin selectable)
+ *
+ * TODO: interrupt, thresholding, orientation / freefall events, autosleep
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/delay.h>
+
+#define MMA8452_STATUS 0x00
+#define MMA8452_OUT_X 0x01 /* MSB first, 12-bit  */
+#define MMA8452_OUT_Y 0x03
+#define MMA8452_OUT_Z 0x05
+#define MMA8452_WHO_AM_I 0x0d
+#define MMA8452_DATA_CFG 0x0e
+#define MMA8452_OFF_X 0x2f
+#define MMA8452_OFF_Y 0x30
+#define MMA8452_OFF_Z 0x31
+#define MMA8452_CTRL_REG1 0x2a
+#define MMA8452_CTRL_REG2 0x2b
+
+#define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
+
+#define MMA8452_CTRL_DR_MASK (BIT(5) | BIT(4) | BIT(3))
+#define MMA8452_CTRL_DR_SHIFT 3
+#define MMA8452_CTRL_DR_DEFAULT 0x4 /* 50 Hz sample frequency */
+#define MMA8452_CTRL_ACTIVE BIT(0)
+
+#define MMA8452_DATA_CFG_FS_MASK (BIT(1) | BIT(0))
+#define MMA8452_DATA_CFG_FS_2G 0
+#define MMA8452_DATA_CFG_FS_4G 1
+#define MMA8452_DATA_CFG_FS_8G 2
+
+#define MMA8452_DEVICE_ID 0x2a
+
+struct mma8452_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 ctrl_reg1;
+	u8 data_cfg;
+};
+
+static int mma8452_drdy(struct mma8452_data *data)
+{
+	int tries = 150;
+
+	while (tries-- > 0) {
+		int ret = i2c_smbus_read_byte_data(data->client,
+			MMA8452_STATUS);
+		if (ret < 0)
+			return ret;
+		if ((ret & MMA8452_STATUS_DRDY) == MMA8452_STATUS_DRDY)
+			return 0;
+		msleep(20);
+	}
+
+	dev_err(&data->client->dev, "data not ready\n");
+	return -EIO;
+}
+
+static int mma8452_read(struct mma8452_data *data, __be16 buf[3])
+{
+	int ret = mma8452_drdy(data);
+	if (ret < 0)
+		return ret;
+	return i2c_smbus_read_i2c_block_data(data->client,
+		MMA8452_OUT_X, 3 * sizeof(__be16), (u8 *) buf);
+}
+
+static ssize_t mma8452_show_int_plus_micros(char *buf,
+	const int (*vals)[2], int n)
+{
+	size_t len = 0;
+
+	while (n-- > 0)
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+			"%d.%06d ", vals[n][0], vals[n][1]);
+
+	/* replace trailing space by newline */
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static int mma8452_get_int_plus_micros_index(const int (*vals)[2], int n,
+					int val, int val2)
+{
+	while (n-- > 0)
+		if (val == vals[n][0] && val2 == vals[n][1])
+			return n;
+
+	return -EINVAL;
+}
+
+static const int mma8452_samp_freq[8][2] = {
+	{800, 0}, {400, 0}, {200, 0}, {100, 0}, {50, 0}, {12, 500000},
+	{6, 250000}, {1, 560000}
+};
+
+/*
+ * Hardware has fullscale of -2G, -4G, -8G corresponding to raw value -2048
+ * The userspace interface uses m/s^2 and we declare micro units
+ * So scale factor is given by:
+ * 	g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
+ */
+static const int mma8452_scales[3][2] = {
+	{0, 9577}, {0, 19154}, {0, 38307}
+};
+
+static ssize_t mma8452_show_samp_freq_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return mma8452_show_int_plus_micros(buf, mma8452_samp_freq,
+		ARRAY_SIZE(mma8452_samp_freq));
+}
+
+static ssize_t mma8452_show_scale_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return mma8452_show_int_plus_micros(buf, mma8452_scales,
+		ARRAY_SIZE(mma8452_scales));
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mma8452_show_samp_freq_avail);
+static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
+	mma8452_show_scale_avail, NULL, 0);
+
+static int mma8452_get_samp_freq_index(struct mma8452_data *data,
+	int val, int val2)
+{
+	return mma8452_get_int_plus_micros_index(mma8452_samp_freq,
+		ARRAY_SIZE(mma8452_samp_freq), val, val2);
+}
+
+static int mma8452_get_scale_index(struct mma8452_data *data,
+	int val, int val2)
+{
+	return mma8452_get_int_plus_micros_index(mma8452_scales,
+		ARRAY_SIZE(mma8452_scales), val, val2);
+}
+
+static int mma8452_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct mma8452_data *data = iio_priv(indio_dev);
+	__be16 buffer[3];
+	int i, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (iio_buffer_enabled(indio_dev))
+			return -EBUSY;
+
+		mutex_lock(&data->lock);
+		ret = mma8452_read(data, buffer);
+		mutex_unlock(&data->lock);
+		if (ret < 0)
+			return ret;
+		*val = sign_extend32(
+			be16_to_cpu(buffer[chan->scan_index]) >> 4, 11);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		i = data->data_cfg & MMA8452_DATA_CFG_FS_MASK;
+		*val = mma8452_scales[i][0];
+		*val2 = mma8452_scales[i][1];
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		i = (data->ctrl_reg1 & MMA8452_CTRL_DR_MASK) >>
+			MMA8452_CTRL_DR_SHIFT;
+		*val = mma8452_samp_freq[i][0];
+		*val2 = mma8452_samp_freq[i][1];
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = i2c_smbus_read_byte_data(data->client, MMA8452_OFF_X +
+			chan->scan_index);
+		if (ret < 0)
+			return ret;
+		*val = sign_extend32(ret, 7);
+		return IIO_VAL_INT;
+	}
+	return -EINVAL;
+}
+
+static int mma8452_standby(struct mma8452_data *data)
+{
+	return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1,
+		data->ctrl_reg1 & ~MMA8452_CTRL_ACTIVE);
+}
+
+static int mma8452_active(struct mma8452_data *data)
+{
+	return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1,
+		data->ctrl_reg1);
+}
+
+static int mma8452_change_config(struct mma8452_data *data, u8 reg, u8 val)
+{
+	int ret;
+
+	mutex_lock(&data->lock);
+
+	/* config can only be changed when in standby */
+	ret = mma8452_standby(data);
+	if (ret < 0)
+		goto fail;
+
+	ret = i2c_smbus_write_byte_data(data->client, reg, val);
+	if (ret < 0)
+		goto fail;
+
+	ret = mma8452_active(data);
+	if (ret < 0)
+		goto fail;
+
+	ret = 0;
+fail:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int mma8452_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct mma8452_data *data = iio_priv(indio_dev);
+	int i;
+
+	if (iio_buffer_enabled(indio_dev))
+		return -EBUSY;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		i = mma8452_get_samp_freq_index(data, val, val2);
+		if (i < 0)
+			return -EINVAL;
+
+		data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK;
+		data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT;
+		return mma8452_change_config(data, MMA8452_CTRL_REG1,
+			data->ctrl_reg1);
+	case IIO_CHAN_INFO_SCALE:
+		i = mma8452_get_scale_index(data, val, val2);
+		if (i < 0)
+			return -EINVAL;
+		data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK;
+		data->data_cfg |= i;
+		return mma8452_change_config(data, MMA8452_DATA_CFG,
+			data->data_cfg);
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (val < -128 || val > 127)
+			return -EINVAL;
+		return mma8452_change_config(data, MMA8452_OFF_X +
+			chan->scan_index, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t mma8452_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct mma8452_data *data = iio_priv(indio_dev);
+	u8 buffer[16]; /* 3 16-bit channels + padding + ts */
+	int ret;
+
+	ret = mma8452_read(data, (__be16 *) buffer);
+	if (ret < 0)
+		goto done;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+		iio_get_time_ns());
+
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+#define MMA8452_CHANNEL(axis, idx) { \
+	.type = IIO_ACCEL, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_##axis, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		BIT(IIO_CHAN_INFO_CALIBBIAS), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+		BIT(IIO_CHAN_INFO_SCALE), \
+	.scan_index = idx, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = 12, \
+		.storagebits = 16, \
+		.shift = 4, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+static const struct iio_chan_spec mma8452_channels[] = {
+	MMA8452_CHANNEL(X, 0),
+	MMA8452_CHANNEL(Y, 1),
+	MMA8452_CHANNEL(Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static struct attribute *mma8452_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group mma8452_group = {
+	.attrs = mma8452_attributes,
+};
+
+static const struct iio_info mma8452_info = {
+	.attrs = &mma8452_group,
+	.read_raw = &mma8452_read_raw,
+	.write_raw = &mma8452_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static const unsigned long mma8452_scan_masks[] = {0x7, 0};
+
+static int mma8452_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct mma8452_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
+	if (ret < 0)
+		return ret;
+	if (ret != MMA8452_DEVICE_ID)
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+
+	i2c_set_clientdata(client, indio_dev);
+	indio_dev->info = &mma8452_info;
+	indio_dev->name = id->name;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = mma8452_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mma8452_channels);
+	indio_dev->available_scan_masks = mma8452_scan_masks;
+
+	data->ctrl_reg1 = MMA8452_CTRL_ACTIVE |
+		(MMA8452_CTRL_DR_DEFAULT << MMA8452_CTRL_DR_SHIFT);
+	ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG1,
+		data->ctrl_reg1);
+	if (ret < 0)
+		return ret;
+
+	data->data_cfg = MMA8452_DATA_CFG_FS_2G;
+	ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG,
+		data->data_cfg);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+		mma8452_trigger_handler, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto buffer_cleanup;
+	return 0;
+
+buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+	return ret;
+}
+
+static int mma8452_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	mma8452_standby(iio_priv(indio_dev));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mma8452_suspend(struct device *dev)
+{
+	return mma8452_standby(iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev))));
+}
+
+static int mma8452_resume(struct device *dev)
+{
+	return mma8452_active(iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev))));
+}
+
+static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume);
+#define MMA8452_PM_OPS (&mma8452_pm_ops)
+#else
+#define MMA8452_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id mma8452_id[] = {
+	{ "mma8452", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mma8452_id);
+
+static const struct of_device_id mma8452_dt_ids[] = {
+	{ .compatible = "fsl,mma8452" },
+	{ }
+};
+
+static struct i2c_driver mma8452_driver = {
+	.driver = {
+		.name	= "mma8452",
+		.of_match_table = of_match_ptr(mma8452_dt_ids),
+		.pm	= MMA8452_PM_OPS,
+	},
+	.probe = mma8452_probe,
+	.remove = mma8452_remove,
+	.id_table = mma8452_id,
+};
+module_i2c_driver(mma8452_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("Freescale MMA8452 accelerometer driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/iio/accel/mma9551.c b/kernel/drivers/iio/accel/mma9551.c
new file mode 100644
index 000000000..7db7cc0bf
--- /dev/null
+++ b/kernel/drivers/iio/accel/mma9551.c
@@ -0,0 +1,638 @@
+/*
+ * Freescale MMA9551L Intelligent Motion-Sensing Platform driver
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/pm_runtime.h>
+#include "mma9551_core.h"
+
+#define MMA9551_DRV_NAME		"mma9551"
+#define MMA9551_IRQ_NAME		"mma9551_event"
+#define MMA9551_GPIO_NAME		"mma9551_int"
+#define MMA9551_GPIO_COUNT		4
+
+/* Tilt application (inclination in IIO terms). */
+#define MMA9551_TILT_XZ_ANG_REG		0x00
+#define MMA9551_TILT_YZ_ANG_REG		0x01
+#define MMA9551_TILT_XY_ANG_REG		0x02
+#define MMA9551_TILT_ANGFLG		BIT(7)
+#define MMA9551_TILT_QUAD_REG		0x03
+#define MMA9551_TILT_XY_QUAD_SHIFT	0
+#define MMA9551_TILT_YZ_QUAD_SHIFT	2
+#define MMA9551_TILT_XZ_QUAD_SHIFT	4
+#define MMA9551_TILT_CFG_REG		0x01
+#define MMA9551_TILT_ANG_THRESH_MASK	GENMASK(3, 0)
+
+#define MMA9551_DEFAULT_SAMPLE_RATE	122	/* Hz */
+
+/* Tilt events are mapped to the first three GPIO pins. */
+enum mma9551_tilt_axis {
+	mma9551_x = 0,
+	mma9551_y,
+	mma9551_z,
+};
+
+struct mma9551_data {
+	struct i2c_client *client;
+	struct mutex mutex;
+	int event_enabled[3];
+	int irqs[MMA9551_GPIO_COUNT];
+};
+
+static int mma9551_read_incli_chan(struct i2c_client *client,
+				   const struct iio_chan_spec *chan,
+				   int *val)
+{
+	u8 quad_shift, angle, quadrant;
+	u16 reg_addr;
+	int ret;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg_addr = MMA9551_TILT_YZ_ANG_REG;
+		quad_shift = MMA9551_TILT_YZ_QUAD_SHIFT;
+		break;
+	case IIO_MOD_Y:
+		reg_addr = MMA9551_TILT_XZ_ANG_REG;
+		quad_shift = MMA9551_TILT_XZ_QUAD_SHIFT;
+		break;
+	case IIO_MOD_Z:
+		reg_addr = MMA9551_TILT_XY_ANG_REG;
+		quad_shift = MMA9551_TILT_XY_QUAD_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = mma9551_set_power_state(client, true);
+	if (ret < 0)
+		return ret;
+
+	ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT,
+				       reg_addr, &angle);
+	if (ret < 0)
+		goto out_poweroff;
+
+	ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT,
+				       MMA9551_TILT_QUAD_REG, &quadrant);
+	if (ret < 0)
+		goto out_poweroff;
+
+	angle &= ~MMA9551_TILT_ANGFLG;
+	quadrant = (quadrant >> quad_shift) & 0x03;
+
+	if (quadrant == 1 || quadrant == 3)
+		*val = 90 * (quadrant + 1) - angle;
+	else
+		*val = angle + 90 * quadrant;
+
+	ret = IIO_VAL_INT;
+
+out_poweroff:
+	mma9551_set_power_state(client, false);
+	return ret;
+}
+
+static int mma9551_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_INCLI:
+			mutex_lock(&data->mutex);
+			ret = mma9551_read_incli_chan(data->client, chan, val);
+			mutex_unlock(&data->mutex);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			mutex_lock(&data->mutex);
+			ret = mma9551_read_accel_chan(data->client,
+						      chan, val, val2);
+			mutex_unlock(&data->mutex);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			return mma9551_read_accel_scale(val, val2);
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9551_read_event_config(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+
+	switch (chan->type) {
+	case IIO_INCLI:
+		/* IIO counts axes from 1, because IIO_NO_MOD is 0. */
+		return data->event_enabled[chan->channel2 - 1];
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9551_config_incli_event(struct iio_dev *indio_dev,
+				      enum iio_modifier axis,
+				      int state)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+	enum mma9551_tilt_axis mma_axis;
+	int ret;
+
+	/* IIO counts axes from 1, because IIO_NO_MOD is 0. */
+	mma_axis = axis - 1;
+
+	if (data->event_enabled[mma_axis] == state)
+		return 0;
+
+	if (state == 0) {
+		ret = mma9551_gpio_config(data->client,
+					  (enum mma9551_gpio_pin)mma_axis,
+					  MMA9551_APPID_NONE, 0, 0);
+		if (ret < 0)
+			return ret;
+
+		ret = mma9551_set_power_state(data->client, false);
+		if (ret < 0)
+			return ret;
+	} else {
+		int bitnum;
+
+		/* Bit 7 of each angle register holds the angle flag. */
+		switch (axis) {
+		case IIO_MOD_X:
+			bitnum = 7 + 8 * MMA9551_TILT_YZ_ANG_REG;
+			break;
+		case IIO_MOD_Y:
+			bitnum = 7 + 8 * MMA9551_TILT_XZ_ANG_REG;
+			break;
+		case IIO_MOD_Z:
+			bitnum = 7 + 8 * MMA9551_TILT_XY_ANG_REG;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+
+		ret = mma9551_set_power_state(data->client, true);
+		if (ret < 0)
+			return ret;
+
+		ret = mma9551_gpio_config(data->client,
+					  (enum mma9551_gpio_pin)mma_axis,
+					  MMA9551_APPID_TILT, bitnum, 0);
+		if (ret < 0) {
+			mma9551_set_power_state(data->client, false);
+			return ret;
+		}
+	}
+
+	data->event_enabled[mma_axis] = state;
+
+	return ret;
+}
+
+static int mma9551_write_event_config(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir,
+				      int state)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (chan->type) {
+	case IIO_INCLI:
+		mutex_lock(&data->mutex);
+		ret = mma9551_config_incli_event(indio_dev,
+						 chan->channel2, state);
+		mutex_unlock(&data->mutex);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9551_write_event_value(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir,
+				     enum iio_event_info info,
+				     int val, int val2)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (chan->type) {
+	case IIO_INCLI:
+		if (val2 != 0 || val < 1 || val > 10)
+			return -EINVAL;
+		mutex_lock(&data->mutex);
+		ret = mma9551_update_config_bits(data->client,
+						 MMA9551_APPID_TILT,
+						 MMA9551_TILT_CFG_REG,
+						 MMA9551_TILT_ANG_THRESH_MASK,
+						 val);
+		mutex_unlock(&data->mutex);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9551_read_event_value(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    enum iio_event_info info,
+				    int *val, int *val2)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+	u8 tmp;
+
+	switch (chan->type) {
+	case IIO_INCLI:
+		mutex_lock(&data->mutex);
+		ret = mma9551_read_config_byte(data->client,
+					       MMA9551_APPID_TILT,
+					       MMA9551_TILT_CFG_REG, &tmp);
+		mutex_unlock(&data->mutex);
+		if (ret < 0)
+			return ret;
+		*val = tmp & MMA9551_TILT_ANG_THRESH_MASK;
+		*val2 = 0;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_event_spec mma9551_incli_event = {
+	.type = IIO_EV_TYPE_ROC,
+	.dir = IIO_EV_DIR_RISING,
+	.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE),
+};
+
+#define MMA9551_INCLI_CHANNEL(axis) {				\
+	.type = IIO_INCLI,					\
+	.modified = 1,						\
+	.channel2 = axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),	\
+	.event_spec = &mma9551_incli_event,			\
+	.num_event_specs = 1,					\
+}
+
+static const struct iio_chan_spec mma9551_channels[] = {
+	MMA9551_ACCEL_CHANNEL(IIO_MOD_X),
+	MMA9551_ACCEL_CHANNEL(IIO_MOD_Y),
+	MMA9551_ACCEL_CHANNEL(IIO_MOD_Z),
+
+	MMA9551_INCLI_CHANNEL(IIO_MOD_X),
+	MMA9551_INCLI_CHANNEL(IIO_MOD_Y),
+	MMA9551_INCLI_CHANNEL(IIO_MOD_Z),
+};
+
+static const struct iio_info mma9551_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = mma9551_read_raw,
+	.read_event_config = mma9551_read_event_config,
+	.write_event_config = mma9551_write_event_config,
+	.read_event_value = mma9551_read_event_value,
+	.write_event_value = mma9551_write_event_value,
+};
+
+static irqreturn_t mma9551_event_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int i, ret, mma_axis = -1;
+	u16 reg;
+	u8 val;
+
+	mutex_lock(&data->mutex);
+
+	for (i = 0; i < 3; i++)
+		if (irq == data->irqs[i]) {
+			mma_axis = i;
+			break;
+		}
+
+	if (mma_axis == -1) {
+		/* IRQ was triggered on 4th line, which we don't use. */
+		dev_warn(&data->client->dev,
+			 "irq triggered on unused line %d\n", data->irqs[3]);
+		goto out;
+	}
+
+	switch (mma_axis) {
+	case mma9551_x:
+		reg = MMA9551_TILT_YZ_ANG_REG;
+		break;
+	case mma9551_y:
+		reg = MMA9551_TILT_XZ_ANG_REG;
+		break;
+	case mma9551_z:
+		reg = MMA9551_TILT_XY_ANG_REG;
+		break;
+	}
+
+	/*
+	 * Read the angle even though we don't use it, otherwise we
+	 * won't get any further interrupts.
+	 */
+	ret = mma9551_read_status_byte(data->client, MMA9551_APPID_TILT,
+				       reg, &val);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"error %d reading tilt register in IRQ\n", ret);
+		goto out;
+	}
+
+	iio_push_event(indio_dev,
+		       IIO_MOD_EVENT_CODE(IIO_INCLI, 0, (mma_axis + 1),
+					  IIO_EV_TYPE_ROC, IIO_EV_DIR_RISING),
+		       iio_get_time_ns());
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return IRQ_HANDLED;
+}
+
+static int mma9551_init(struct mma9551_data *data)
+{
+	int ret;
+
+	ret = mma9551_read_version(data->client);
+	if (ret)
+		return ret;
+
+	return mma9551_set_device_state(data->client, true);
+}
+
+static int mma9551_gpio_probe(struct iio_dev *indio_dev)
+{
+	struct gpio_desc *gpio;
+	int i, ret;
+	struct mma9551_data *data = iio_priv(indio_dev);
+	struct device *dev = &data->client->dev;
+
+	for (i = 0; i < MMA9551_GPIO_COUNT; i++) {
+		gpio = devm_gpiod_get_index(dev, MMA9551_GPIO_NAME, i,
+					    GPIOD_IN);
+		if (IS_ERR(gpio)) {
+			dev_err(dev, "acpi gpio get index failed\n");
+			return PTR_ERR(gpio);
+		}
+
+		ret = gpiod_to_irq(gpio);
+		if (ret < 0)
+			return ret;
+
+		data->irqs[i] = ret;
+		ret = devm_request_threaded_irq(dev, data->irqs[i],
+				NULL, mma9551_event_handler,
+				IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				MMA9551_IRQ_NAME, indio_dev);
+		if (ret < 0) {
+			dev_err(dev, "request irq %d failed\n", data->irqs[i]);
+			return ret;
+		}
+
+		dev_dbg(dev, "gpio resource, no:%d irq:%d\n",
+			desc_to_gpio(gpio), data->irqs[i]);
+	}
+
+	return 0;
+}
+
+static const char *mma9551_match_acpi_device(struct device *dev)
+{
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(dev->driver->acpi_match_table, dev);
+	if (!id)
+		return NULL;
+
+	return dev_name(dev);
+}
+
+static int mma9551_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct mma9551_data *data;
+	struct iio_dev *indio_dev;
+	const char *name = NULL;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	if (id)
+		name = id->name;
+	else if (ACPI_HANDLE(&client->dev))
+		name = mma9551_match_acpi_device(&client->dev);
+
+	ret = mma9551_init(data);
+	if (ret < 0)
+		return ret;
+
+	mutex_init(&data->mutex);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = mma9551_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mma9551_channels);
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &mma9551_info;
+
+	ret = mma9551_gpio_probe(indio_dev);
+	if (ret < 0)
+		goto out_poweroff;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to register iio device\n");
+		goto out_poweroff;
+	}
+
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret < 0)
+		goto out_iio_unregister;
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev,
+					 MMA9551_AUTO_SUSPEND_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	return 0;
+
+out_iio_unregister:
+	iio_device_unregister(indio_dev);
+out_poweroff:
+	mma9551_set_device_state(client, false);
+
+	return ret;
+}
+
+static int mma9551_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct mma9551_data *data = iio_priv(indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_put_noidle(&client->dev);
+
+	iio_device_unregister(indio_dev);
+	mutex_lock(&data->mutex);
+	mma9551_set_device_state(data->client, false);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mma9551_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = mma9551_set_device_state(data->client, false);
+	mutex_unlock(&data->mutex);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "powering off device failed\n");
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+
+static int mma9551_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = mma9551_set_device_state(data->client, true);
+	if (ret < 0)
+		return ret;
+
+	mma9551_sleep(MMA9551_DEFAULT_SAMPLE_RATE);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int mma9551_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = mma9551_set_device_state(data->client, false);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int mma9551_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = mma9551_set_device_state(data->client, true);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+#endif
+
+static const struct dev_pm_ops mma9551_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(mma9551_suspend, mma9551_resume)
+	SET_RUNTIME_PM_OPS(mma9551_runtime_suspend,
+			   mma9551_runtime_resume, NULL)
+};
+
+static const struct acpi_device_id mma9551_acpi_match[] = {
+	{"MMA9551", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(acpi, mma9551_acpi_match);
+
+static const struct i2c_device_id mma9551_id[] = {
+	{"mma9551", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, mma9551_id);
+
+static struct i2c_driver mma9551_driver = {
+	.driver = {
+		   .name = MMA9551_DRV_NAME,
+		   .acpi_match_table = ACPI_PTR(mma9551_acpi_match),
+		   .pm = &mma9551_pm_ops,
+		   },
+	.probe = mma9551_probe,
+	.remove = mma9551_remove,
+	.id_table = mma9551_id,
+};
+
+module_i2c_driver(mma9551_driver);
+
+MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>");
+MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MMA9551L motion-sensing platform driver");
diff --git a/kernel/drivers/iio/accel/mma9551_core.c b/kernel/drivers/iio/accel/mma9551_core.c
new file mode 100644
index 000000000..c6d5a3a40
--- /dev/null
+++ b/kernel/drivers/iio/accel/mma9551_core.c
@@ -0,0 +1,813 @@
+/*
+ * Common code for Freescale MMA955x Intelligent Sensor Platform drivers
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/pm_runtime.h>
+#include "mma9551_core.h"
+
+/* Command masks for mailbox write command */
+#define MMA9551_CMD_READ_VERSION_INFO	0x00
+#define MMA9551_CMD_READ_CONFIG		0x10
+#define MMA9551_CMD_WRITE_CONFIG	0x20
+#define MMA9551_CMD_READ_STATUS		0x30
+
+/* Mailbox read command */
+#define MMA9551_RESPONSE_COCO		BIT(7)
+
+/* Error-Status codes returned in mailbox read command */
+#define MMA9551_MCI_ERROR_NONE			0x00
+#define MMA9551_MCI_ERROR_PARAM			0x04
+#define MMA9551_MCI_INVALID_COUNT		0x19
+#define MMA9551_MCI_ERROR_COMMAND		0x1C
+#define MMA9551_MCI_ERROR_INVALID_LENGTH	0x21
+#define MMA9551_MCI_ERROR_FIFO_BUSY		0x22
+#define MMA9551_MCI_ERROR_FIFO_ALLOCATED	0x23
+#define MMA9551_MCI_ERROR_FIFO_OVERSIZE		0x24
+
+/* GPIO Application */
+#define MMA9551_GPIO_POL_MSB		0x08
+#define MMA9551_GPIO_POL_LSB		0x09
+
+/* Sleep/Wake application */
+#define MMA9551_SLEEP_CFG		0x06
+#define MMA9551_SLEEP_CFG_SNCEN		BIT(0)
+#define MMA9551_SLEEP_CFG_FLEEN		BIT(1)
+#define MMA9551_SLEEP_CFG_SCHEN		BIT(2)
+
+/* AFE application */
+#define MMA9551_AFE_X_ACCEL_REG		0x00
+#define MMA9551_AFE_Y_ACCEL_REG		0x02
+#define MMA9551_AFE_Z_ACCEL_REG		0x04
+
+/* Reset/Suspend/Clear application */
+#define MMA9551_RSC_RESET		0x00
+#define MMA9551_RSC_OFFSET(mask)	(3 - (ffs(mask) - 1) / 8)
+#define MMA9551_RSC_VAL(mask)		(mask >> (((ffs(mask) - 1) / 8) * 8))
+
+/*
+ * A response is composed of:
+ * - control registers: MB0-3
+ * - data registers: MB4-31
+ *
+ * A request is composed of:
+ * - mbox to write to (always 0)
+ * - control registers: MB1-4
+ * - data registers: MB5-31
+ */
+#define MMA9551_MAILBOX_CTRL_REGS	4
+#define MMA9551_MAX_MAILBOX_DATA_REGS	28
+#define MMA9551_MAILBOX_REGS		32
+
+#define MMA9551_I2C_READ_RETRIES	5
+#define MMA9551_I2C_READ_DELAY	50	/* us */
+
+struct mma9551_mbox_request {
+	u8 start_mbox;		/* Always 0. */
+	u8 app_id;
+	/*
+	 * See Section 5.3.1 of the MMA955xL Software Reference Manual.
+	 *
+	 * Bit 7: reserved, always 0
+	 * Bits 6-4: command
+	 * Bits 3-0: upper bits of register offset
+	 */
+	u8 cmd_off;
+	u8 lower_off;
+	u8 nbytes;
+	u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS - 1];
+} __packed;
+
+struct mma9551_mbox_response {
+	u8 app_id;
+	/*
+	 * See Section 5.3.3 of the MMA955xL Software Reference Manual.
+	 *
+	 * Bit 7: COCO
+	 * Bits 6-0: Error code.
+	 */
+	u8 coco_err;
+	u8 nbytes;
+	u8 req_bytes;
+	u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS];
+} __packed;
+
+struct mma9551_version_info {
+	__be32 device_id;
+	u8 rom_version[2];
+	u8 fw_version[2];
+	u8 hw_version[2];
+	u8 fw_build[2];
+};
+
+static int mma9551_transfer(struct i2c_client *client,
+			    u8 app_id, u8 command, u16 offset,
+			    u8 *inbytes, int num_inbytes,
+			    u8 *outbytes, int num_outbytes)
+{
+	struct mma9551_mbox_request req;
+	struct mma9551_mbox_response rsp;
+	struct i2c_msg in, out;
+	u8 req_len, err_code;
+	int ret, retries;
+
+	if (offset >= 1 << 12) {
+		dev_err(&client->dev, "register offset too large\n");
+		return -EINVAL;
+	}
+
+	req_len = 1 + MMA9551_MAILBOX_CTRL_REGS + num_inbytes;
+	req.start_mbox = 0;
+	req.app_id = app_id;
+	req.cmd_off = command | (offset >> 8);
+	req.lower_off = offset;
+
+	if (command == MMA9551_CMD_WRITE_CONFIG)
+		req.nbytes = num_inbytes;
+	else
+		req.nbytes = num_outbytes;
+	if (num_inbytes)
+		memcpy(req.buf, inbytes, num_inbytes);
+
+	out.addr = client->addr;
+	out.flags = 0;
+	out.len = req_len;
+	out.buf = (u8 *)&req;
+
+	ret = i2c_transfer(client->adapter, &out, 1);
+	if (ret < 0) {
+		dev_err(&client->dev, "i2c write failed\n");
+		return ret;
+	}
+
+	retries = MMA9551_I2C_READ_RETRIES;
+	do {
+		udelay(MMA9551_I2C_READ_DELAY);
+
+		in.addr = client->addr;
+		in.flags = I2C_M_RD;
+		in.len = sizeof(rsp);
+		in.buf = (u8 *)&rsp;
+
+		ret = i2c_transfer(client->adapter, &in, 1);
+		if (ret < 0) {
+			dev_err(&client->dev, "i2c read failed\n");
+			return ret;
+		}
+
+		if (rsp.coco_err & MMA9551_RESPONSE_COCO)
+			break;
+	} while (--retries > 0);
+
+	if (retries == 0) {
+		dev_err(&client->dev,
+			"timed out while waiting for command response\n");
+		return -ETIMEDOUT;
+	}
+
+	if (rsp.app_id != app_id) {
+		dev_err(&client->dev,
+			"app_id mismatch in response got %02x expected %02x\n",
+			rsp.app_id, app_id);
+		return -EINVAL;
+	}
+
+	err_code = rsp.coco_err & ~MMA9551_RESPONSE_COCO;
+	if (err_code != MMA9551_MCI_ERROR_NONE) {
+		dev_err(&client->dev, "read returned error %x\n", err_code);
+		return -EINVAL;
+	}
+
+	if (rsp.nbytes != rsp.req_bytes) {
+		dev_err(&client->dev,
+			"output length mismatch got %d expected %d\n",
+			rsp.nbytes, rsp.req_bytes);
+		return -EINVAL;
+	}
+
+	if (num_outbytes)
+		memcpy(outbytes, rsp.buf, num_outbytes);
+
+	return 0;
+}
+
+/**
+ * mma9551_read_config_byte() - read 1 configuration byte
+ * @client:	I2C client
+ * @app_id:	Application ID
+ * @reg:	Application register
+ * @val:	Pointer to store value read
+ *
+ * Read one configuration byte from the device using MMA955xL command format.
+ * Commands to the MMA955xL platform consist of a write followed
+ * by one or more reads.
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_read_config_byte(struct i2c_client *client, u8 app_id,
+			     u16 reg, u8 *val)
+{
+	return mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG,
+				reg, NULL, 0, val, 1);
+}
+EXPORT_SYMBOL(mma9551_read_config_byte);
+
+/**
+ * mma9551_write_config_byte() - write 1 configuration byte
+ * @client:	I2C client
+ * @app_id:	Application ID
+ * @reg:	Application register
+ * @val:	Value to write
+ *
+ * Write one configuration byte from the device using MMA955xL command format.
+ * Commands to the MMA955xL platform consist of a write followed by one or
+ * more reads.
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_write_config_byte(struct i2c_client *client, u8 app_id,
+			      u16 reg, u8 val)
+{
+	return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG, reg,
+				&val, 1, NULL, 0);
+}
+EXPORT_SYMBOL(mma9551_write_config_byte);
+
+/**
+ * mma9551_read_status_byte() - read 1 status byte
+ * @client:	I2C client
+ * @app_id:	Application ID
+ * @reg:	Application register
+ * @val:	Pointer to store value read
+ *
+ * Read one status byte from the device using MMA955xL command format.
+ * Commands to the MMA955xL platform consist of a write followed by one or
+ * more reads.
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_read_status_byte(struct i2c_client *client, u8 app_id,
+			     u16 reg, u8 *val)
+{
+	return mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS,
+				reg, NULL, 0, val, 1);
+}
+EXPORT_SYMBOL(mma9551_read_status_byte);
+
+/**
+ * mma9551_read_config_word() - read 1 config word
+ * @client:	I2C client
+ * @app_id:	Application ID
+ * @reg:	Application register
+ * @val:	Pointer to store value read
+ *
+ * Read one configuration word from the device using MMA955xL command format.
+ * Commands to the MMA955xL platform consist of a write followed by one or
+ * more reads.
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_read_config_word(struct i2c_client *client, u8 app_id,
+			    u16 reg, u16 *val)
+{
+	int ret;
+	__be16 v;
+
+	ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG,
+			       reg, NULL, 0, (u8 *)&v, 2);
+	*val = be16_to_cpu(v);
+
+	return ret;
+}
+EXPORT_SYMBOL(mma9551_read_config_word);
+
+/**
+ * mma9551_write_config_word() - write 1 config word
+ * @client:	I2C client
+ * @app_id:	Application ID
+ * @reg:	Application register
+ * @val:	Value to write
+ *
+ * Write one configuration word from the device using MMA955xL command format.
+ * Commands to the MMA955xL platform consist of a write followed by one or
+ * more reads.
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_write_config_word(struct i2c_client *client, u8 app_id,
+			     u16 reg, u16 val)
+{
+	__be16 v = cpu_to_be16(val);
+
+	return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG, reg,
+				(u8 *) &v, 2, NULL, 0);
+}
+EXPORT_SYMBOL(mma9551_write_config_word);
+
+/**
+ * mma9551_read_status_word() - read 1 status word
+ * @client:	I2C client
+ * @app_id:	Application ID
+ * @reg:	Application register
+ * @val:	Pointer to store value read
+ *
+ * Read one status word from the device using MMA955xL command format.
+ * Commands to the MMA955xL platform consist of a write followed by one or
+ * more reads.
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_read_status_word(struct i2c_client *client, u8 app_id,
+			     u16 reg, u16 *val)
+{
+	int ret;
+	__be16 v;
+
+	ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS,
+			       reg, NULL, 0, (u8 *)&v, 2);
+	*val = be16_to_cpu(v);
+
+	return ret;
+}
+EXPORT_SYMBOL(mma9551_read_status_word);
+
+/**
+ * mma9551_read_config_words() - read multiple config words
+ * @client:	I2C client
+ * @app_id:	Application ID
+ * @reg:	Application register
+ * @len:	Length of array to read in bytes
+ * @val:	Array of words to read
+ *
+ * Read multiple configuration registers (word-sized registers).
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_read_config_words(struct i2c_client *client, u8 app_id,
+			     u16 reg, u8 len, u16 *buf)
+{
+	int ret, i;
+	int len_words = len / sizeof(u16);
+	__be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2];
+
+	if (len_words > ARRAY_SIZE(be_buf)) {
+		dev_err(&client->dev, "Invalid buffer size %d\n", len);
+		return -EINVAL;
+	}
+
+	ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG,
+			       reg, NULL, 0, (u8 *) be_buf, len);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < len_words; i++)
+		buf[i] = be16_to_cpu(be_buf[i]);
+
+	return 0;
+}
+EXPORT_SYMBOL(mma9551_read_config_words);
+
+/**
+ * mma9551_read_status_words() - read multiple status words
+ * @client:	I2C client
+ * @app_id:	Application ID
+ * @reg:	Application register
+ * @len:	Length of array to read in bytes
+ * @val:	Array of words to read
+ *
+ * Read multiple status registers (word-sized registers).
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_read_status_words(struct i2c_client *client, u8 app_id,
+			      u16 reg, u8 len, u16 *buf)
+{
+	int ret, i;
+	int len_words = len / sizeof(u16);
+	__be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2];
+
+	if (len_words > ARRAY_SIZE(be_buf)) {
+		dev_err(&client->dev, "Invalid buffer size %d\n", len);
+		return -EINVAL;
+	}
+
+	ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS,
+			       reg, NULL, 0, (u8 *) be_buf, len);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < len_words; i++)
+		buf[i] = be16_to_cpu(be_buf[i]);
+
+	return 0;
+}
+EXPORT_SYMBOL(mma9551_read_status_words);
+
+/**
+ * mma9551_write_config_words() - write multiple config words
+ * @client:	I2C client
+ * @app_id:	Application ID
+ * @reg:	Application register
+ * @len:	Length of array to write in bytes
+ * @val:	Array of words to write
+ *
+ * Write multiple configuration registers (word-sized registers).
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_write_config_words(struct i2c_client *client, u8 app_id,
+			       u16 reg, u8 len, u16 *buf)
+{
+	int i;
+	int len_words = len / sizeof(u16);
+	__be16 be_buf[(MMA9551_MAX_MAILBOX_DATA_REGS - 1) / 2];
+
+	if (len_words > ARRAY_SIZE(be_buf)) {
+		dev_err(&client->dev, "Invalid buffer size %d\n", len);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < len_words; i++)
+		be_buf[i] = cpu_to_be16(buf[i]);
+
+	return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG,
+				reg, (u8 *) be_buf, len, NULL, 0);
+}
+EXPORT_SYMBOL(mma9551_write_config_words);
+
+/**
+ * mma9551_update_config_bits() - update bits in register
+ * @client:	I2C client
+ * @app_id:	Application ID
+ * @reg:	Application register
+ * @mask:	Mask for the bits to update
+ * @val:	Value of the bits to update
+ *
+ * Update bits in the given register using a bit mask.
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_update_config_bits(struct i2c_client *client, u8 app_id,
+			       u16 reg, u8 mask, u8 val)
+{
+	int ret;
+	u8 tmp, orig;
+
+	ret = mma9551_read_config_byte(client, app_id, reg, &orig);
+	if (ret < 0)
+		return ret;
+
+	tmp = orig & ~mask;
+	tmp |= val & mask;
+
+	if (tmp == orig)
+		return 0;
+
+	return mma9551_write_config_byte(client, app_id, reg, tmp);
+}
+EXPORT_SYMBOL(mma9551_update_config_bits);
+
+/**
+ * mma9551_gpio_config() - configure gpio
+ * @client:	I2C client
+ * @pin:	GPIO pin to configure
+ * @app_id:	Application ID
+ * @bitnum:	Bit number of status register being assigned to the GPIO pin.
+ * @polarity:	The polarity parameter is described in section 6.2.2, page 66,
+ *		of the Software Reference Manual.  Basically, polarity=0 means
+ *		the interrupt line has the same value as the selected bit,
+ *		while polarity=1 means the line is inverted.
+ *
+ * Assign a bit from an application’s status register to a specific GPIO pin.
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_gpio_config(struct i2c_client *client, enum mma9551_gpio_pin pin,
+			u8 app_id, u8 bitnum, int polarity)
+{
+	u8 reg, pol_mask, pol_val;
+	int ret;
+
+	if (pin > mma9551_gpio_max) {
+		dev_err(&client->dev, "bad GPIO pin\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Pin 6 is configured by regs 0x00 and 0x01, pin 7 by 0x02 and
+	 * 0x03, and so on.
+	 */
+	reg = pin * 2;
+
+	ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO,
+					reg, app_id);
+	if (ret < 0) {
+		dev_err(&client->dev, "error setting GPIO app_id\n");
+		return ret;
+	}
+
+	ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO,
+					reg + 1, bitnum);
+	if (ret < 0) {
+		dev_err(&client->dev, "error setting GPIO bit number\n");
+		return ret;
+	}
+
+	switch (pin) {
+	case mma9551_gpio6:
+		reg = MMA9551_GPIO_POL_LSB;
+		pol_mask = 1 << 6;
+		break;
+	case mma9551_gpio7:
+		reg = MMA9551_GPIO_POL_LSB;
+		pol_mask = 1 << 7;
+		break;
+	case mma9551_gpio8:
+		reg = MMA9551_GPIO_POL_MSB;
+		pol_mask = 1 << 0;
+		break;
+	case mma9551_gpio9:
+		reg = MMA9551_GPIO_POL_MSB;
+		pol_mask = 1 << 1;
+		break;
+	}
+	pol_val = polarity ? pol_mask : 0;
+
+	ret = mma9551_update_config_bits(client, MMA9551_APPID_GPIO, reg,
+					 pol_mask, pol_val);
+	if (ret < 0)
+		dev_err(&client->dev, "error setting GPIO polarity\n");
+
+	return ret;
+}
+EXPORT_SYMBOL(mma9551_gpio_config);
+
+/**
+ * mma9551_read_version() - read device version information
+ * @client:	I2C client
+ *
+ * Read version information and print device id and firmware version.
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_read_version(struct i2c_client *client)
+{
+	struct mma9551_version_info info;
+	int ret;
+
+	ret = mma9551_transfer(client, MMA9551_APPID_VERSION, 0x00, 0x00,
+			       NULL, 0, (u8 *)&info, sizeof(info));
+	if (ret < 0)
+		return ret;
+
+	dev_info(&client->dev, "device ID 0x%x, firmware version %02x.%02x\n",
+		 be32_to_cpu(info.device_id), info.fw_version[0],
+		 info.fw_version[1]);
+
+	return 0;
+}
+EXPORT_SYMBOL(mma9551_read_version);
+
+/**
+ * mma9551_set_device_state() - sets HW power mode
+ * @client:	I2C client
+ * @enable:	Use true to power on device, false to cause the device
+ *		to enter sleep.
+ *
+ * Set power on/off for device using the Sleep/Wake Application.
+ * When enable is true, power on chip and enable doze mode.
+ * When enable is false, enter sleep mode (device remains in the
+ * lowest-power mode).
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_set_device_state(struct i2c_client *client, bool enable)
+{
+	return mma9551_update_config_bits(client, MMA9551_APPID_SLEEP_WAKE,
+					  MMA9551_SLEEP_CFG,
+					  MMA9551_SLEEP_CFG_SNCEN |
+					  MMA9551_SLEEP_CFG_FLEEN |
+					  MMA9551_SLEEP_CFG_SCHEN,
+					  enable ? MMA9551_SLEEP_CFG_SCHEN |
+					  MMA9551_SLEEP_CFG_FLEEN :
+					  MMA9551_SLEEP_CFG_SNCEN);
+}
+EXPORT_SYMBOL(mma9551_set_device_state);
+
+/**
+ * mma9551_set_power_state() - sets runtime PM state
+ * @client:	I2C client
+ * @on:		Use true to power on device, false to power off
+ *
+ * Resume or suspend the device using Runtime PM.
+ * The device will suspend after the autosuspend delay.
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_set_power_state(struct i2c_client *client, bool on)
+{
+#ifdef CONFIG_PM
+	int ret;
+
+	if (on)
+		ret = pm_runtime_get_sync(&client->dev);
+	else {
+		pm_runtime_mark_last_busy(&client->dev);
+		ret = pm_runtime_put_autosuspend(&client->dev);
+	}
+
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"failed to change power state to %d\n", on);
+		if (on)
+			pm_runtime_put_noidle(&client->dev);
+
+		return ret;
+	}
+#endif
+
+	return 0;
+}
+EXPORT_SYMBOL(mma9551_set_power_state);
+
+/**
+ * mma9551_sleep() - sleep
+ * @freq:	Application frequency
+ *
+ * Firmware applications run at a certain frequency on the
+ * device. Sleep for one application cycle to make sure the
+ * application had time to run once and initialize set values.
+ */
+void mma9551_sleep(int freq)
+{
+	int sleep_val = 1000 / freq;
+
+	if (sleep_val < 20)
+		usleep_range(sleep_val * 1000, 20000);
+	else
+		msleep_interruptible(sleep_val);
+}
+EXPORT_SYMBOL(mma9551_sleep);
+
+/**
+ * mma9551_read_accel_chan() - read accelerometer channel
+ * @client:	I2C client
+ * @chan:	IIO channel
+ * @val:	Pointer to the accelerometer value read
+ * @val2:	Unused
+ *
+ * Read accelerometer value for the specified channel.
+ *
+ * Locking note: This function must be called with the device lock held.
+ * Locking is not handled inside the function. Callers should ensure they
+ * serialize access to the HW.
+ *
+ * Returns: IIO_VAL_INT on success, negative value on failure.
+ */
+int mma9551_read_accel_chan(struct i2c_client *client,
+			    const struct iio_chan_spec *chan,
+			    int *val, int *val2)
+{
+	u16 reg_addr;
+	s16 raw_accel;
+	int ret;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg_addr = MMA9551_AFE_X_ACCEL_REG;
+		break;
+	case IIO_MOD_Y:
+		reg_addr = MMA9551_AFE_Y_ACCEL_REG;
+		break;
+	case IIO_MOD_Z:
+		reg_addr = MMA9551_AFE_Z_ACCEL_REG;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = mma9551_set_power_state(client, true);
+	if (ret < 0)
+		return ret;
+
+	ret = mma9551_read_status_word(client, MMA9551_APPID_AFE,
+				       reg_addr, &raw_accel);
+	if (ret < 0)
+		goto out_poweroff;
+
+	*val = raw_accel;
+
+	ret = IIO_VAL_INT;
+
+out_poweroff:
+	mma9551_set_power_state(client, false);
+	return ret;
+}
+EXPORT_SYMBOL(mma9551_read_accel_chan);
+
+/**
+ * mma9551_read_accel_scale() - read accelerometer scale
+ * @val:	Pointer to the accelerometer scale (int value)
+ * @val2:	Pointer to the accelerometer scale (micro value)
+ *
+ * Read accelerometer scale.
+ *
+ * Returns: IIO_VAL_INT_PLUS_MICRO.
+ */
+int mma9551_read_accel_scale(int *val, int *val2)
+{
+	*val = 0;
+	*val2 = 2440;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+EXPORT_SYMBOL(mma9551_read_accel_scale);
+
+/**
+ * mma9551_app_reset() - reset application
+ * @client:	I2C client
+ * @app_mask:	Application to reset
+ *
+ * Reset the given application (using the Reset/Suspend/Clear
+ * Control Application)
+ *
+ * Returns: 0 on success, negative value on failure.
+ */
+int mma9551_app_reset(struct i2c_client *client, u32 app_mask)
+{
+	return mma9551_write_config_byte(client, MMA9551_APPID_RCS,
+					 MMA9551_RSC_RESET +
+					 MMA9551_RSC_OFFSET(app_mask),
+					 MMA9551_RSC_VAL(app_mask));
+}
+EXPORT_SYMBOL(mma9551_app_reset);
+
+MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>");
+MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MMA955xL sensors core");
diff --git a/kernel/drivers/iio/accel/mma9551_core.h b/kernel/drivers/iio/accel/mma9551_core.h
new file mode 100644
index 000000000..edaa56b10
--- /dev/null
+++ b/kernel/drivers/iio/accel/mma9551_core.h
@@ -0,0 +1,81 @@
+/*
+ * Common code for Freescale MMA955x Intelligent Sensor Platform drivers
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _MMA9551_CORE_H_
+#define _MMA9551_CORE_H_
+
+/* Applications IDs */
+#define MMA9551_APPID_VERSION		0x00
+#define MMA9551_APPID_GPIO		0x03
+#define MMA9551_APPID_AFE		0x06
+#define MMA9551_APPID_TILT		0x0B
+#define MMA9551_APPID_SLEEP_WAKE	0x12
+#define MMA9551_APPID_PEDOMETER	        0x15
+#define MMA9551_APPID_RCS		0x17
+#define MMA9551_APPID_NONE		0xff
+
+/* Reset/Suspend/Clear application app masks */
+#define MMA9551_RSC_PED			BIT(21)
+
+#define MMA9551_AUTO_SUSPEND_DELAY_MS	2000
+
+enum mma9551_gpio_pin {
+	mma9551_gpio6 = 0,
+	mma9551_gpio7,
+	mma9551_gpio8,
+	mma9551_gpio9,
+	mma9551_gpio_max = mma9551_gpio9,
+};
+
+#define MMA9551_ACCEL_CHANNEL(axis) {				\
+	.type = IIO_ACCEL,					\
+	.modified = 1,						\
+	.channel2 = axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+}
+
+int mma9551_read_config_byte(struct i2c_client *client, u8 app_id,
+			     u16 reg, u8 *val);
+int mma9551_write_config_byte(struct i2c_client *client, u8 app_id,
+			      u16 reg, u8 val);
+int mma9551_read_status_byte(struct i2c_client *client, u8 app_id,
+			     u16 reg, u8 *val);
+int mma9551_read_config_word(struct i2c_client *client, u8 app_id,
+			    u16 reg, u16 *val);
+int mma9551_write_config_word(struct i2c_client *client, u8 app_id,
+			     u16 reg, u16 val);
+int mma9551_read_status_word(struct i2c_client *client, u8 app_id,
+			     u16 reg, u16 *val);
+int mma9551_read_config_words(struct i2c_client *client, u8 app_id,
+			     u16 reg, u8 len, u16 *buf);
+int mma9551_read_status_words(struct i2c_client *client, u8 app_id,
+			      u16 reg, u8 len, u16 *buf);
+int mma9551_write_config_words(struct i2c_client *client, u8 app_id,
+			       u16 reg, u8 len, u16 *buf);
+int mma9551_update_config_bits(struct i2c_client *client, u8 app_id,
+			       u16 reg, u8 mask, u8 val);
+int mma9551_gpio_config(struct i2c_client *client, enum mma9551_gpio_pin pin,
+			u8 app_id, u8 bitnum, int polarity);
+int mma9551_read_version(struct i2c_client *client);
+int mma9551_set_device_state(struct i2c_client *client, bool enable);
+int mma9551_set_power_state(struct i2c_client *client, bool on);
+void mma9551_sleep(int freq);
+int mma9551_read_accel_chan(struct i2c_client *client,
+			    const struct iio_chan_spec *chan,
+			    int *val, int *val2);
+int mma9551_read_accel_scale(int *val, int *val2);
+int mma9551_app_reset(struct i2c_client *client, u32 app_mask);
+
+#endif /* _MMA9551_CORE_H_ */
diff --git a/kernel/drivers/iio/accel/mma9553.c b/kernel/drivers/iio/accel/mma9553.c
new file mode 100644
index 000000000..365a109aa
--- /dev/null
+++ b/kernel/drivers/iio/accel/mma9553.c
@@ -0,0 +1,1332 @@
+/*
+ * Freescale MMA9553L Intelligent Pedometer driver
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/pm_runtime.h>
+#include "mma9551_core.h"
+
+#define MMA9553_DRV_NAME			"mma9553"
+#define MMA9553_IRQ_NAME			"mma9553_event"
+#define MMA9553_GPIO_NAME			"mma9553_int"
+
+/* Pedometer configuration registers (R/W) */
+#define MMA9553_REG_CONF_SLEEPMIN		0x00
+#define MMA9553_REG_CONF_SLEEPMAX		0x02
+#define MMA9553_REG_CONF_SLEEPTHD		0x04
+#define MMA9553_MASK_CONF_WORD			GENMASK(15, 0)
+
+#define MMA9553_REG_CONF_CONF_STEPLEN		0x06
+#define MMA9553_MASK_CONF_CONFIG		BIT(15)
+#define MMA9553_MASK_CONF_ACT_DBCNTM		BIT(14)
+#define MMA9553_MASK_CONF_SLP_DBCNTM		BIT(13)
+#define MMA9553_MASK_CONF_STEPLEN		GENMASK(7, 0)
+
+#define MMA9553_REG_CONF_HEIGHT_WEIGHT		0x08
+#define MMA9553_MASK_CONF_HEIGHT		GENMASK(15, 8)
+#define MMA9553_MASK_CONF_WEIGHT		GENMASK(7, 0)
+
+#define MMA9553_REG_CONF_FILTER			0x0A
+#define MMA9553_MASK_CONF_FILTSTEP		GENMASK(15, 8)
+#define MMA9553_MASK_CONF_MALE			BIT(7)
+#define MMA9553_MASK_CONF_FILTTIME		GENMASK(6, 0)
+
+#define MMA9553_REG_CONF_SPEED_STEP		0x0C
+#define MMA9553_MASK_CONF_SPDPRD		GENMASK(15, 8)
+#define MMA9553_MASK_CONF_STEPCOALESCE		GENMASK(7, 0)
+
+#define MMA9553_REG_CONF_ACTTHD			0x0E
+#define MMA9553_MAX_ACTTHD			GENMASK(15, 0)
+
+/* Pedometer status registers (R-only) */
+#define MMA9553_REG_STATUS			0x00
+#define MMA9553_MASK_STATUS_MRGFL		BIT(15)
+#define MMA9553_MASK_STATUS_SUSPCHG		BIT(14)
+#define MMA9553_MASK_STATUS_STEPCHG		BIT(13)
+#define MMA9553_MASK_STATUS_ACTCHG		BIT(12)
+#define MMA9553_MASK_STATUS_SUSP		BIT(11)
+#define MMA9553_MASK_STATUS_ACTIVITY		(BIT(10) | BIT(9) | BIT(8))
+#define MMA9553_MASK_STATUS_VERSION		0x00FF
+
+#define MMA9553_REG_STEPCNT			0x02
+#define MMA9553_REG_DISTANCE			0x04
+#define MMA9553_REG_SPEED			0x06
+#define MMA9553_REG_CALORIES			0x08
+#define MMA9553_REG_SLEEPCNT			0x0A
+
+/* Pedometer events are always mapped to this pin. */
+#define MMA9553_DEFAULT_GPIO_PIN	mma9551_gpio6
+#define MMA9553_DEFAULT_GPIO_POLARITY	0
+
+/* Bitnum used for gpio configuration = bit number in high status byte */
+#define STATUS_TO_BITNUM(bit)		(ffs(bit) - 9)
+
+#define MMA9553_DEFAULT_SAMPLE_RATE	30	/* Hz */
+
+/*
+ * The internal activity level must be stable for ACTTHD samples before
+ * ACTIVITY is updated.The ACTIVITY variable contains the current activity
+ * level and is updated every time a step is detected or once a second
+ * if there are no steps.
+ */
+#define MMA9553_ACTIVITY_THD_TO_SEC(thd) ((thd) / MMA9553_DEFAULT_SAMPLE_RATE)
+#define MMA9553_ACTIVITY_SEC_TO_THD(sec) ((sec) * MMA9553_DEFAULT_SAMPLE_RATE)
+
+/*
+ * Autonomously suspend pedometer if acceleration vector magnitude
+ * is near 1g (4096 at 0.244 mg/LSB resolution) for 30 seconds.
+ */
+#define MMA9553_DEFAULT_SLEEPMIN	3688	/* 0,9 g */
+#define MMA9553_DEFAULT_SLEEPMAX	4508	/* 1,1 g */
+#define MMA9553_DEFAULT_SLEEPTHD	(MMA9553_DEFAULT_SAMPLE_RATE * 30)
+
+#define MMA9553_CONFIG_RETRIES		2
+
+/* Status register - activity field  */
+enum activity_level {
+	ACTIVITY_UNKNOWN,
+	ACTIVITY_REST,
+	ACTIVITY_WALKING,
+	ACTIVITY_JOGGING,
+	ACTIVITY_RUNNING,
+};
+
+static struct mma9553_event_info {
+	enum iio_chan_type type;
+	enum iio_modifier mod;
+	enum iio_event_direction dir;
+} mma9553_events_info[] = {
+	{
+		.type = IIO_STEPS,
+		.mod = IIO_NO_MOD,
+		.dir = IIO_EV_DIR_NONE,
+	},
+	{
+		.type = IIO_ACTIVITY,
+		.mod = IIO_MOD_STILL,
+		.dir = IIO_EV_DIR_RISING,
+	},
+	{
+		.type = IIO_ACTIVITY,
+		.mod = IIO_MOD_STILL,
+		.dir = IIO_EV_DIR_FALLING,
+	},
+	{
+		.type = IIO_ACTIVITY,
+		.mod = IIO_MOD_WALKING,
+		.dir = IIO_EV_DIR_RISING,
+	},
+	{
+		.type = IIO_ACTIVITY,
+		.mod = IIO_MOD_WALKING,
+		.dir = IIO_EV_DIR_FALLING,
+	},
+	{
+		.type = IIO_ACTIVITY,
+		.mod = IIO_MOD_JOGGING,
+		.dir = IIO_EV_DIR_RISING,
+	},
+	{
+		.type = IIO_ACTIVITY,
+		.mod = IIO_MOD_JOGGING,
+		.dir = IIO_EV_DIR_FALLING,
+	},
+	{
+		.type = IIO_ACTIVITY,
+		.mod = IIO_MOD_RUNNING,
+		.dir = IIO_EV_DIR_RISING,
+	},
+	{
+		.type = IIO_ACTIVITY,
+		.mod = IIO_MOD_RUNNING,
+		.dir = IIO_EV_DIR_FALLING,
+	},
+};
+
+#define MMA9553_EVENTS_INFO_SIZE ARRAY_SIZE(mma9553_events_info)
+
+struct mma9553_event {
+	struct mma9553_event_info *info;
+	bool enabled;
+};
+
+struct mma9553_conf_regs {
+	u16 sleepmin;
+	u16 sleepmax;
+	u16 sleepthd;
+	u16 config;
+	u16 height_weight;
+	u16 filter;
+	u16 speed_step;
+	u16 actthd;
+} __packed;
+
+struct mma9553_data {
+	struct i2c_client *client;
+	struct mutex mutex;
+	struct mma9553_conf_regs conf;
+	struct mma9553_event events[MMA9553_EVENTS_INFO_SIZE];
+	int num_events;
+	u8 gpio_bitnum;
+	/*
+	 * This is used for all features that depend on step count:
+	 * step count, distance, speed, calories.
+	 */
+	bool stepcnt_enabled;
+	u16 stepcnt;
+	u8 activity;
+	s64 timestamp;
+};
+
+static u8 mma9553_get_bits(u16 val, u16 mask)
+{
+	return (val & mask) >> (ffs(mask) - 1);
+}
+
+static u16 mma9553_set_bits(u16 current_val, u16 val, u16 mask)
+{
+	return (current_val & ~mask) | (val << (ffs(mask) - 1));
+}
+
+static enum iio_modifier mma9553_activity_to_mod(enum activity_level activity)
+{
+	switch (activity) {
+	case ACTIVITY_RUNNING:
+		return IIO_MOD_RUNNING;
+	case ACTIVITY_JOGGING:
+		return IIO_MOD_JOGGING;
+	case ACTIVITY_WALKING:
+		return IIO_MOD_WALKING;
+	case ACTIVITY_REST:
+		return IIO_MOD_STILL;
+	case ACTIVITY_UNKNOWN:
+	default:
+		return IIO_NO_MOD;
+	}
+}
+
+static void mma9553_init_events(struct mma9553_data *data)
+{
+	int i;
+
+	data->num_events = MMA9553_EVENTS_INFO_SIZE;
+	for (i = 0; i < data->num_events; i++) {
+		data->events[i].info = &mma9553_events_info[i];
+		data->events[i].enabled = false;
+	}
+}
+
+static struct mma9553_event *mma9553_get_event(struct mma9553_data *data,
+					       enum iio_chan_type type,
+					       enum iio_modifier mod,
+					       enum iio_event_direction dir)
+{
+	int i;
+
+	for (i = 0; i < data->num_events; i++)
+		if (data->events[i].info->type == type &&
+		    data->events[i].info->mod == mod &&
+		    data->events[i].info->dir == dir)
+			return &data->events[i];
+
+	return NULL;
+}
+
+static bool mma9553_is_any_event_enabled(struct mma9553_data *data,
+					 bool check_type,
+					 enum iio_chan_type type)
+{
+	int i;
+
+	for (i = 0; i < data->num_events; i++)
+		if ((check_type && data->events[i].info->type == type &&
+		     data->events[i].enabled) ||
+		     (!check_type && data->events[i].enabled))
+			return true;
+
+	return false;
+}
+
+static int mma9553_set_config(struct mma9553_data *data, u16 reg,
+			      u16 *p_reg_val, u16 val, u16 mask)
+{
+	int ret, retries;
+	u16 reg_val, config;
+
+	reg_val = *p_reg_val;
+	if (val == mma9553_get_bits(reg_val, mask))
+		return 0;
+
+	reg_val = mma9553_set_bits(reg_val, val, mask);
+	ret = mma9551_write_config_word(data->client, MMA9551_APPID_PEDOMETER,
+					reg, reg_val);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"error writing config register 0x%x\n", reg);
+		return ret;
+	}
+
+	*p_reg_val = reg_val;
+
+	/* Reinitializes the pedometer with current configuration values */
+	config = mma9553_set_bits(data->conf.config, 1,
+				  MMA9553_MASK_CONF_CONFIG);
+
+	ret = mma9551_write_config_word(data->client, MMA9551_APPID_PEDOMETER,
+					MMA9553_REG_CONF_CONF_STEPLEN, config);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"error writing config register 0x%x\n",
+			MMA9553_REG_CONF_CONF_STEPLEN);
+		return ret;
+	}
+
+	retries = MMA9553_CONFIG_RETRIES;
+	do {
+		mma9551_sleep(MMA9553_DEFAULT_SAMPLE_RATE);
+		ret = mma9551_read_config_word(data->client,
+					       MMA9551_APPID_PEDOMETER,
+					       MMA9553_REG_CONF_CONF_STEPLEN,
+					       &config);
+		if (ret < 0)
+			return ret;
+	} while (mma9553_get_bits(config, MMA9553_MASK_CONF_CONFIG) &&
+		 --retries > 0);
+
+	return 0;
+}
+
+static int mma9553_read_activity_stepcnt(struct mma9553_data *data,
+					 u8 *activity, u16 *stepcnt)
+{
+	u16 buf[2];
+	int ret;
+
+	ret = mma9551_read_status_words(data->client, MMA9551_APPID_PEDOMETER,
+					MMA9553_REG_STATUS, sizeof(u32), buf);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"error reading status and stepcnt\n");
+		return ret;
+	}
+
+	*activity = mma9553_get_bits(buf[0], MMA9553_MASK_STATUS_ACTIVITY);
+	*stepcnt = buf[1];
+
+	return 0;
+}
+
+static int mma9553_conf_gpio(struct mma9553_data *data)
+{
+	u8 bitnum = 0, appid = MMA9551_APPID_PEDOMETER;
+	int ret;
+	struct mma9553_event *ev_step_detect;
+	bool activity_enabled;
+
+	activity_enabled =
+	    mma9553_is_any_event_enabled(data, true, IIO_ACTIVITY);
+	ev_step_detect =
+	    mma9553_get_event(data, IIO_STEPS, IIO_NO_MOD, IIO_EV_DIR_NONE);
+
+	/*
+	 * If both step detector and activity are enabled, use the MRGFL bit.
+	 * This bit is the logical OR of the SUSPCHG, STEPCHG, and ACTCHG flags.
+	 */
+	if (activity_enabled && ev_step_detect->enabled)
+		bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_MRGFL);
+	else if (ev_step_detect->enabled)
+		bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_STEPCHG);
+	else if (activity_enabled)
+		bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_ACTCHG);
+	else			/* Reset */
+		appid = MMA9551_APPID_NONE;
+
+	if (data->gpio_bitnum == bitnum)
+		return 0;
+
+	/* Save initial values for activity and stepcnt */
+	if (activity_enabled || ev_step_detect->enabled)
+		mma9553_read_activity_stepcnt(data, &data->activity,
+					      &data->stepcnt);
+
+	ret = mma9551_gpio_config(data->client,
+				  MMA9553_DEFAULT_GPIO_PIN,
+				  appid, bitnum, MMA9553_DEFAULT_GPIO_POLARITY);
+	if (ret < 0)
+		return ret;
+	data->gpio_bitnum = bitnum;
+
+	return 0;
+}
+
+static int mma9553_init(struct mma9553_data *data)
+{
+	int ret;
+
+	ret = mma9551_read_version(data->client);
+	if (ret)
+		return ret;
+
+	/*
+	 * Read all the pedometer configuration registers. This is used as
+	 * a device identification command to differentiate the MMA9553L
+	 * from the MMA9550L.
+	 */
+	ret =
+	    mma9551_read_config_words(data->client, MMA9551_APPID_PEDOMETER,
+				      MMA9553_REG_CONF_SLEEPMIN,
+				      sizeof(data->conf), (u16 *) &data->conf);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"device is not MMA9553L: failed to read cfg regs\n");
+		return ret;
+	}
+
+
+	/* Reset gpio */
+	data->gpio_bitnum = -1;
+	ret = mma9553_conf_gpio(data);
+	if (ret < 0)
+		return ret;
+
+	ret = mma9551_app_reset(data->client, MMA9551_RSC_PED);
+	if (ret < 0)
+		return ret;
+
+	/* Init config registers */
+	data->conf.sleepmin = MMA9553_DEFAULT_SLEEPMIN;
+	data->conf.sleepmax = MMA9553_DEFAULT_SLEEPMAX;
+	data->conf.sleepthd = MMA9553_DEFAULT_SLEEPTHD;
+	data->conf.config =
+	    mma9553_set_bits(data->conf.config, 1, MMA9553_MASK_CONF_CONFIG);
+	/*
+	 * Clear the activity debounce counter when the activity level changes,
+	 * so that the confidence level applies for any activity level.
+	 */
+	data->conf.config = mma9553_set_bits(data->conf.config, 1,
+					     MMA9553_MASK_CONF_ACT_DBCNTM);
+	ret =
+	    mma9551_write_config_words(data->client, MMA9551_APPID_PEDOMETER,
+				       MMA9553_REG_CONF_SLEEPMIN,
+				       sizeof(data->conf), (u16 *) &data->conf);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"failed to write configuration registers\n");
+		return ret;
+	}
+
+	return mma9551_set_device_state(data->client, true);
+}
+
+static int mma9553_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct mma9553_data *data = iio_priv(indio_dev);
+	int ret;
+	u16 tmp;
+	u8 activity;
+	bool powered_on;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_STEPS:
+			/*
+			 * The HW only counts steps and other dependent
+			 * parameters (speed, distance, calories, activity)
+			 * if power is on (from enabling an event or the
+			 * step counter */
+			powered_on =
+			    mma9553_is_any_event_enabled(data, false, 0) ||
+			    data->stepcnt_enabled;
+			if (!powered_on) {
+				dev_err(&data->client->dev,
+					"No channels enabled\n");
+				return -EINVAL;
+			}
+			mutex_lock(&data->mutex);
+			ret = mma9551_read_status_word(data->client,
+						       MMA9551_APPID_PEDOMETER,
+						       MMA9553_REG_STEPCNT,
+						       &tmp);
+			mutex_unlock(&data->mutex);
+			if (ret < 0)
+				return ret;
+			*val = tmp;
+			return IIO_VAL_INT;
+		case IIO_DISTANCE:
+			powered_on =
+			    mma9553_is_any_event_enabled(data, false, 0) ||
+			    data->stepcnt_enabled;
+			if (!powered_on) {
+				dev_err(&data->client->dev,
+					"No channels enabled\n");
+				return -EINVAL;
+			}
+			mutex_lock(&data->mutex);
+			ret = mma9551_read_status_word(data->client,
+						       MMA9551_APPID_PEDOMETER,
+						       MMA9553_REG_DISTANCE,
+						       &tmp);
+			mutex_unlock(&data->mutex);
+			if (ret < 0)
+				return ret;
+			*val = tmp;
+			return IIO_VAL_INT;
+		case IIO_ACTIVITY:
+			powered_on =
+			    mma9553_is_any_event_enabled(data, false, 0) ||
+			    data->stepcnt_enabled;
+			if (!powered_on) {
+				dev_err(&data->client->dev,
+					"No channels enabled\n");
+				return -EINVAL;
+			}
+			mutex_lock(&data->mutex);
+			ret = mma9551_read_status_word(data->client,
+						       MMA9551_APPID_PEDOMETER,
+						       MMA9553_REG_STATUS,
+						       &tmp);
+			mutex_unlock(&data->mutex);
+			if (ret < 0)
+				return ret;
+
+			activity =
+			    mma9553_get_bits(tmp, MMA9553_MASK_STATUS_ACTIVITY);
+
+			/*
+			 * The device does not support confidence value levels,
+			 * so we will always have 100% for current activity and
+			 * 0% for the others.
+			 */
+			if (chan->channel2 == mma9553_activity_to_mod(activity))
+				*val = 100;
+			else
+				*val = 0;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_VELOCITY:	/* m/h */
+			if (chan->channel2 != IIO_MOD_ROOT_SUM_SQUARED_X_Y_Z)
+				return -EINVAL;
+			powered_on =
+			    mma9553_is_any_event_enabled(data, false, 0) ||
+			    data->stepcnt_enabled;
+			if (!powered_on) {
+				dev_err(&data->client->dev,
+					"No channels enabled\n");
+				return -EINVAL;
+			}
+			mutex_lock(&data->mutex);
+			ret = mma9551_read_status_word(data->client,
+						       MMA9551_APPID_PEDOMETER,
+						       MMA9553_REG_SPEED, &tmp);
+			mutex_unlock(&data->mutex);
+			if (ret < 0)
+				return ret;
+			*val = tmp;
+			return IIO_VAL_INT;
+		case IIO_ENERGY:	/* Cal or kcal */
+			powered_on =
+			    mma9553_is_any_event_enabled(data, false, 0) ||
+			    data->stepcnt_enabled;
+			if (!powered_on) {
+				dev_err(&data->client->dev,
+					"No channels enabled\n");
+				return -EINVAL;
+			}
+			mutex_lock(&data->mutex);
+			ret = mma9551_read_status_word(data->client,
+						       MMA9551_APPID_PEDOMETER,
+						       MMA9553_REG_CALORIES,
+						       &tmp);
+			mutex_unlock(&data->mutex);
+			if (ret < 0)
+				return ret;
+			*val = tmp;
+			return IIO_VAL_INT;
+		case IIO_ACCEL:
+			mutex_lock(&data->mutex);
+			ret = mma9551_read_accel_chan(data->client,
+						      chan, val, val2);
+			mutex_unlock(&data->mutex);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_VELOCITY:	/* m/h to m/s */
+			if (chan->channel2 != IIO_MOD_ROOT_SUM_SQUARED_X_Y_Z)
+				return -EINVAL;
+			*val = 0;
+			*val2 = 277;	/* 0.000277 */
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_ENERGY:	/* Cal or kcal to J */
+			*val = 4184;
+			return IIO_VAL_INT;
+		case IIO_ACCEL:
+			return mma9551_read_accel_scale(val, val2);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_ENABLE:
+		*val = data->stepcnt_enabled;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_CALIBHEIGHT:
+		tmp = mma9553_get_bits(data->conf.height_weight,
+					MMA9553_MASK_CONF_HEIGHT);
+		*val = tmp / 100;	/* cm to m */
+		*val2 = (tmp % 100) * 10000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_CALIBWEIGHT:
+		*val = mma9553_get_bits(data->conf.height_weight,
+					MMA9553_MASK_CONF_WEIGHT);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_DEBOUNCE_COUNT:
+		switch (chan->type) {
+		case IIO_STEPS:
+			*val = mma9553_get_bits(data->conf.filter,
+						MMA9553_MASK_CONF_FILTSTEP);
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_DEBOUNCE_TIME:
+		switch (chan->type) {
+		case IIO_STEPS:
+			*val = mma9553_get_bits(data->conf.filter,
+						MMA9553_MASK_CONF_FILTTIME);
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_INT_TIME:
+		switch (chan->type) {
+		case IIO_VELOCITY:
+			if (chan->channel2 != IIO_MOD_ROOT_SUM_SQUARED_X_Y_Z)
+				return -EINVAL;
+			*val = mma9553_get_bits(data->conf.speed_step,
+						MMA9553_MASK_CONF_SPDPRD);
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9553_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct mma9553_data *data = iio_priv(indio_dev);
+	int ret, tmp;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_ENABLE:
+		if (data->stepcnt_enabled == !!val)
+			return 0;
+		mutex_lock(&data->mutex);
+		ret = mma9551_set_power_state(data->client, val);
+		if (ret < 0) {
+			mutex_unlock(&data->mutex);
+			return ret;
+		}
+		data->stepcnt_enabled = val;
+		mutex_unlock(&data->mutex);
+		return 0;
+	case IIO_CHAN_INFO_CALIBHEIGHT:
+		/* m to cm */
+		tmp = val * 100 + val2 / 10000;
+		if (tmp < 0 || tmp > 255)
+			return -EINVAL;
+		mutex_lock(&data->mutex);
+		ret = mma9553_set_config(data,
+					 MMA9553_REG_CONF_HEIGHT_WEIGHT,
+					 &data->conf.height_weight,
+					 tmp, MMA9553_MASK_CONF_HEIGHT);
+		mutex_unlock(&data->mutex);
+		return ret;
+	case IIO_CHAN_INFO_CALIBWEIGHT:
+		if (val < 0 || val > 255)
+			return -EINVAL;
+		mutex_lock(&data->mutex);
+		ret = mma9553_set_config(data,
+					 MMA9553_REG_CONF_HEIGHT_WEIGHT,
+					 &data->conf.height_weight,
+					 val, MMA9553_MASK_CONF_WEIGHT);
+		mutex_unlock(&data->mutex);
+		return ret;
+	case IIO_CHAN_INFO_DEBOUNCE_COUNT:
+		switch (chan->type) {
+		case IIO_STEPS:
+			/*
+			 * Set to 0 to disable step filtering. If the value
+			 * specified is greater than 6, then 6 will be used.
+			 */
+			if (val < 0)
+				return -EINVAL;
+			if (val > 6)
+				val = 6;
+			mutex_lock(&data->mutex);
+			ret = mma9553_set_config(data, MMA9553_REG_CONF_FILTER,
+						 &data->conf.filter, val,
+						 MMA9553_MASK_CONF_FILTSTEP);
+			mutex_unlock(&data->mutex);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_DEBOUNCE_TIME:
+		switch (chan->type) {
+		case IIO_STEPS:
+			if (val < 0 || val > 127)
+				return -EINVAL;
+			mutex_lock(&data->mutex);
+			ret = mma9553_set_config(data, MMA9553_REG_CONF_FILTER,
+						 &data->conf.filter, val,
+						 MMA9553_MASK_CONF_FILTTIME);
+			mutex_unlock(&data->mutex);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_INT_TIME:
+		switch (chan->type) {
+		case IIO_VELOCITY:
+			if (chan->channel2 != IIO_MOD_ROOT_SUM_SQUARED_X_Y_Z)
+				return -EINVAL;
+			/*
+			 * If set to a value greater than 5, then 5 will be
+			 * used. Warning: Do not set SPDPRD to 0 or 1 as
+			 * this may cause undesirable behavior.
+			 */
+			if (val < 2)
+				return -EINVAL;
+			if (val > 5)
+				val = 5;
+			mutex_lock(&data->mutex);
+			ret = mma9553_set_config(data,
+						 MMA9553_REG_CONF_SPEED_STEP,
+						 &data->conf.speed_step, val,
+						 MMA9553_MASK_CONF_SPDPRD);
+			mutex_unlock(&data->mutex);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9553_read_event_config(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir)
+{
+
+	struct mma9553_data *data = iio_priv(indio_dev);
+	struct mma9553_event *event;
+
+	event = mma9553_get_event(data, chan->type, chan->channel2, dir);
+	if (!event)
+		return -EINVAL;
+
+	return event->enabled;
+}
+
+static int mma9553_write_event_config(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir, int state)
+{
+	struct mma9553_data *data = iio_priv(indio_dev);
+	struct mma9553_event *event;
+	int ret;
+
+	event = mma9553_get_event(data, chan->type, chan->channel2, dir);
+	if (!event)
+		return -EINVAL;
+
+	if (event->enabled == state)
+		return 0;
+
+	mutex_lock(&data->mutex);
+
+	ret = mma9551_set_power_state(data->client, state);
+	if (ret < 0)
+		goto err_out;
+	event->enabled = state;
+
+	ret = mma9553_conf_gpio(data);
+	if (ret < 0)
+		goto err_conf_gpio;
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+
+err_conf_gpio:
+	if (state) {
+		event->enabled = false;
+		mma9551_set_power_state(data->client, false);
+	}
+err_out:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int mma9553_read_event_value(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    enum iio_event_info info,
+				    int *val, int *val2)
+{
+	struct mma9553_data *data = iio_priv(indio_dev);
+
+	*val2 = 0;
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (chan->type) {
+		case IIO_STEPS:
+			*val = mma9553_get_bits(data->conf.speed_step,
+						MMA9553_MASK_CONF_STEPCOALESCE);
+			return IIO_VAL_INT;
+		case IIO_ACTIVITY:
+			/*
+			 * The device does not support confidence value levels.
+			 * We set an average of 50%.
+			 */
+			*val = 50;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_EV_INFO_PERIOD:
+		switch (chan->type) {
+		case IIO_ACTIVITY:
+			*val = MMA9553_ACTIVITY_THD_TO_SEC(data->conf.actthd);
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9553_write_event_value(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir,
+				     enum iio_event_info info,
+				     int val, int val2)
+{
+	struct mma9553_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (chan->type) {
+		case IIO_STEPS:
+			if (val < 0 || val > 255)
+				return -EINVAL;
+			mutex_lock(&data->mutex);
+			ret = mma9553_set_config(data,
+						MMA9553_REG_CONF_SPEED_STEP,
+						&data->conf.speed_step, val,
+						MMA9553_MASK_CONF_STEPCOALESCE);
+			mutex_unlock(&data->mutex);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	case IIO_EV_INFO_PERIOD:
+		switch (chan->type) {
+		case IIO_ACTIVITY:
+			if (val < 0 || val > MMA9553_ACTIVITY_THD_TO_SEC(
+			    MMA9553_MAX_ACTTHD))
+				return -EINVAL;
+			mutex_lock(&data->mutex);
+			ret = mma9553_set_config(data, MMA9553_REG_CONF_ACTTHD,
+						 &data->conf.actthd,
+						 MMA9553_ACTIVITY_SEC_TO_THD
+						 (val), MMA9553_MASK_CONF_WORD);
+			mutex_unlock(&data->mutex);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9553_get_calibgender_mode(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan)
+{
+	struct mma9553_data *data = iio_priv(indio_dev);
+	u8 gender;
+
+	gender = mma9553_get_bits(data->conf.filter, MMA9553_MASK_CONF_MALE);
+	/*
+	 * HW expects 0 for female and 1 for male,
+	 * while iio index is 0 for male and 1 for female
+	 */
+	return !gender;
+}
+
+static int mma9553_set_calibgender_mode(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan,
+					unsigned int mode)
+{
+	struct mma9553_data *data = iio_priv(indio_dev);
+	u8 gender = !mode;
+	int ret;
+
+	if ((mode != 0) && (mode != 1))
+		return -EINVAL;
+	mutex_lock(&data->mutex);
+	ret = mma9553_set_config(data, MMA9553_REG_CONF_FILTER,
+				 &data->conf.filter, gender,
+				 MMA9553_MASK_CONF_MALE);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static const struct iio_event_spec mma9553_step_event = {
+	.type = IIO_EV_TYPE_CHANGE,
+	.dir = IIO_EV_DIR_NONE,
+	.mask_separate = BIT(IIO_EV_INFO_ENABLE) | BIT(IIO_EV_INFO_VALUE),
+};
+
+static const struct iio_event_spec mma9553_activity_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+				 BIT(IIO_EV_INFO_VALUE) |
+				 BIT(IIO_EV_INFO_PERIOD),
+	 },
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+				 BIT(IIO_EV_INFO_VALUE) |
+				 BIT(IIO_EV_INFO_PERIOD),
+	},
+};
+
+static const char * const calibgender_modes[] = { "male", "female" };
+
+static const struct iio_enum mma9553_calibgender_enum = {
+	.items = calibgender_modes,
+	.num_items = ARRAY_SIZE(calibgender_modes),
+	.get = mma9553_get_calibgender_mode,
+	.set = mma9553_set_calibgender_mode,
+};
+
+static const struct iio_chan_spec_ext_info mma9553_ext_info[] = {
+	IIO_ENUM("calibgender", IIO_SHARED_BY_TYPE, &mma9553_calibgender_enum),
+	IIO_ENUM_AVAILABLE("calibgender", &mma9553_calibgender_enum),
+	{},
+};
+
+#define MMA9553_PEDOMETER_CHANNEL(_type, _mask) {		\
+	.type = _type,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_ENABLE)      |	\
+			      BIT(IIO_CHAN_INFO_CALIBHEIGHT) |	\
+			      _mask,				\
+	.ext_info = mma9553_ext_info,				\
+}
+
+#define MMA9553_ACTIVITY_CHANNEL(_chan2) {				\
+	.type = IIO_ACTIVITY,						\
+	.modified = 1,							\
+	.channel2 = _chan2,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT) |	\
+				    BIT(IIO_CHAN_INFO_ENABLE),		\
+	.event_spec = mma9553_activity_events,				\
+	.num_event_specs = ARRAY_SIZE(mma9553_activity_events),		\
+	.ext_info = mma9553_ext_info,					\
+}
+
+static const struct iio_chan_spec mma9553_channels[] = {
+	MMA9551_ACCEL_CHANNEL(IIO_MOD_X),
+	MMA9551_ACCEL_CHANNEL(IIO_MOD_Y),
+	MMA9551_ACCEL_CHANNEL(IIO_MOD_Z),
+
+	{
+		.type = IIO_STEPS,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				     BIT(IIO_CHAN_INFO_ENABLE) |
+				     BIT(IIO_CHAN_INFO_DEBOUNCE_COUNT) |
+				     BIT(IIO_CHAN_INFO_DEBOUNCE_TIME),
+		.event_spec = &mma9553_step_event,
+		.num_event_specs = 1,
+	},
+
+	MMA9553_PEDOMETER_CHANNEL(IIO_DISTANCE, BIT(IIO_CHAN_INFO_PROCESSED)),
+	{
+		.type = IIO_VELOCITY,
+		.modified = 1,
+		.channel2 = IIO_MOD_ROOT_SUM_SQUARED_X_Y_Z,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_INT_TIME) |
+				      BIT(IIO_CHAN_INFO_ENABLE),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT),
+		.ext_info = mma9553_ext_info,
+	},
+	MMA9553_PEDOMETER_CHANNEL(IIO_ENERGY, BIT(IIO_CHAN_INFO_RAW) |
+				  BIT(IIO_CHAN_INFO_SCALE) |
+				  BIT(IIO_CHAN_INFO_CALIBWEIGHT)),
+
+	MMA9553_ACTIVITY_CHANNEL(IIO_MOD_RUNNING),
+	MMA9553_ACTIVITY_CHANNEL(IIO_MOD_JOGGING),
+	MMA9553_ACTIVITY_CHANNEL(IIO_MOD_WALKING),
+	MMA9553_ACTIVITY_CHANNEL(IIO_MOD_STILL),
+};
+
+static const struct iio_info mma9553_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = mma9553_read_raw,
+	.write_raw = mma9553_write_raw,
+	.read_event_config = mma9553_read_event_config,
+	.write_event_config = mma9553_write_event_config,
+	.read_event_value = mma9553_read_event_value,
+	.write_event_value = mma9553_write_event_value,
+};
+
+static irqreturn_t mma9553_irq_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct mma9553_data *data = iio_priv(indio_dev);
+
+	data->timestamp = iio_get_time_ns();
+	/*
+	 * Since we only configure the interrupt pin when an
+	 * event is enabled, we are sure we have at least
+	 * one event enabled at this point.
+	 */
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t mma9553_event_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct mma9553_data *data = iio_priv(indio_dev);
+	u16 stepcnt;
+	u8 activity;
+	struct mma9553_event *ev_activity, *ev_prev_activity, *ev_step_detect;
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = mma9553_read_activity_stepcnt(data, &activity, &stepcnt);
+	if (ret < 0) {
+		mutex_unlock(&data->mutex);
+		return IRQ_HANDLED;
+	}
+
+	ev_prev_activity =
+	    mma9553_get_event(data, IIO_ACTIVITY,
+			      mma9553_activity_to_mod(data->activity),
+			      IIO_EV_DIR_FALLING);
+	ev_activity =
+	    mma9553_get_event(data, IIO_ACTIVITY,
+			      mma9553_activity_to_mod(activity),
+			      IIO_EV_DIR_RISING);
+	ev_step_detect =
+	    mma9553_get_event(data, IIO_STEPS, IIO_NO_MOD, IIO_EV_DIR_NONE);
+
+	if (ev_step_detect->enabled && (stepcnt != data->stepcnt)) {
+		data->stepcnt = stepcnt;
+		iio_push_event(indio_dev,
+			       IIO_EVENT_CODE(IIO_STEPS, 0, IIO_NO_MOD,
+			       IIO_EV_DIR_NONE, IIO_EV_TYPE_CHANGE, 0, 0, 0),
+			       data->timestamp);
+	}
+
+	if (activity != data->activity) {
+		data->activity = activity;
+		/* ev_activity can be NULL if activity == ACTIVITY_UNKNOWN */
+		if (ev_prev_activity && ev_prev_activity->enabled)
+			iio_push_event(indio_dev,
+				       IIO_EVENT_CODE(IIO_ACTIVITY, 0,
+				       ev_prev_activity->info->mod,
+				       IIO_EV_DIR_FALLING,
+				       IIO_EV_TYPE_THRESH, 0, 0, 0),
+				       data->timestamp);
+
+		if (ev_activity && ev_activity->enabled)
+			iio_push_event(indio_dev,
+				       IIO_EVENT_CODE(IIO_ACTIVITY, 0,
+				       ev_activity->info->mod,
+				       IIO_EV_DIR_RISING,
+				       IIO_EV_TYPE_THRESH, 0, 0, 0),
+				       data->timestamp);
+	}
+	mutex_unlock(&data->mutex);
+
+	return IRQ_HANDLED;
+}
+
+static int mma9553_gpio_probe(struct i2c_client *client)
+{
+	struct device *dev;
+	struct gpio_desc *gpio;
+	int ret;
+
+	if (!client)
+		return -EINVAL;
+
+	dev = &client->dev;
+
+	/* data ready gpio interrupt pin */
+	gpio = devm_gpiod_get_index(dev, MMA9553_GPIO_NAME, 0, GPIOD_IN);
+	if (IS_ERR(gpio)) {
+		dev_err(dev, "acpi gpio get index failed\n");
+		return PTR_ERR(gpio);
+	}
+
+	ret = gpiod_to_irq(gpio);
+
+	dev_dbg(dev, "gpio resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
+
+	return ret;
+}
+
+static const char *mma9553_match_acpi_device(struct device *dev)
+{
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(dev->driver->acpi_match_table, dev);
+	if (!id)
+		return NULL;
+
+	return dev_name(dev);
+}
+
+static int mma9553_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct mma9553_data *data;
+	struct iio_dev *indio_dev;
+	const char *name = NULL;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	if (id)
+		name = id->name;
+	else if (ACPI_HANDLE(&client->dev))
+		name = mma9553_match_acpi_device(&client->dev);
+	else
+		return -ENOSYS;
+
+	mutex_init(&data->mutex);
+	mma9553_init_events(data);
+
+	ret = mma9553_init(data);
+	if (ret < 0)
+		return ret;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = mma9553_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mma9553_channels);
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &mma9553_info;
+
+	if (client->irq < 0)
+		client->irq = mma9553_gpio_probe(client);
+
+	if (client->irq >= 0) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						mma9553_irq_handler,
+						mma9553_event_handler,
+						IRQF_TRIGGER_RISING,
+						MMA9553_IRQ_NAME, indio_dev);
+		if (ret < 0) {
+			dev_err(&client->dev, "request irq %d failed\n",
+				client->irq);
+			goto out_poweroff;
+		}
+
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to register iio device\n");
+		goto out_poweroff;
+	}
+
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret < 0)
+		goto out_iio_unregister;
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev,
+					 MMA9551_AUTO_SUSPEND_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	dev_dbg(&indio_dev->dev, "Registered device %s\n", name);
+
+	return 0;
+
+out_iio_unregister:
+	iio_device_unregister(indio_dev);
+out_poweroff:
+	mma9551_set_device_state(client, false);
+	return ret;
+}
+
+static int mma9553_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct mma9553_data *data = iio_priv(indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_put_noidle(&client->dev);
+
+	iio_device_unregister(indio_dev);
+	mutex_lock(&data->mutex);
+	mma9551_set_device_state(data->client, false);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mma9553_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mma9553_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = mma9551_set_device_state(data->client, false);
+	mutex_unlock(&data->mutex);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "powering off device failed\n");
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+
+static int mma9553_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mma9553_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = mma9551_set_device_state(data->client, true);
+	if (ret < 0)
+		return ret;
+
+	mma9551_sleep(MMA9553_DEFAULT_SAMPLE_RATE);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int mma9553_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mma9553_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = mma9551_set_device_state(data->client, false);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int mma9553_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mma9553_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = mma9551_set_device_state(data->client, true);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+#endif
+
+static const struct dev_pm_ops mma9553_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(mma9553_suspend, mma9553_resume)
+	SET_RUNTIME_PM_OPS(mma9553_runtime_suspend,
+			   mma9553_runtime_resume, NULL)
+};
+
+static const struct acpi_device_id mma9553_acpi_match[] = {
+	{"MMA9553", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(acpi, mma9553_acpi_match);
+
+static const struct i2c_device_id mma9553_id[] = {
+	{"mma9553", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, mma9553_id);
+
+static struct i2c_driver mma9553_driver = {
+	.driver = {
+		   .name = MMA9553_DRV_NAME,
+		   .acpi_match_table = ACPI_PTR(mma9553_acpi_match),
+		   .pm = &mma9553_pm_ops,
+		   },
+	.probe = mma9553_probe,
+	.remove = mma9553_remove,
+	.id_table = mma9553_id,
+};
+
+module_i2c_driver(mma9553_driver);
+
+MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MMA9553L pedometer platform driver");
diff --git a/kernel/drivers/iio/accel/ssp_accel_sensor.c b/kernel/drivers/iio/accel/ssp_accel_sensor.c
new file mode 100644
index 000000000..4ae05fce9
--- /dev/null
+++ b/kernel/drivers/iio/accel/ssp_accel_sensor.c
@@ -0,0 +1,169 @@
+/*
+ *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ */
+
+#include <linux/iio/common/ssp_sensors.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include "../common/ssp_sensors/ssp_iio_sensor.h"
+
+#define SSP_CHANNEL_COUNT 3
+
+#define SSP_ACCEL_NAME "ssp-accelerometer"
+static const char ssp_accel_device_name[] = SSP_ACCEL_NAME;
+
+enum ssp_accel_3d_channel {
+	SSP_CHANNEL_SCAN_INDEX_X,
+	SSP_CHANNEL_SCAN_INDEX_Y,
+	SSP_CHANNEL_SCAN_INDEX_Z,
+	SSP_CHANNEL_SCAN_INDEX_TIME,
+};
+
+static int ssp_accel_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,  int *val,
+			      int *val2, long mask)
+{
+	u32 t;
+	struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		t = ssp_get_sensor_delay(data, SSP_ACCELEROMETER_SENSOR);
+		ssp_convert_to_freq(t, val, val2);
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int ssp_accel_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan, int val,
+			       int val2, long mask)
+{
+	int ret;
+	struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = ssp_convert_to_time(val, val2);
+		ret = ssp_change_delay(data, SSP_ACCELEROMETER_SENSOR, ret);
+		if (ret < 0)
+			dev_err(&indio_dev->dev, "accel sensor enable fail\n");
+
+		return ret;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static struct iio_info ssp_accel_iio_info = {
+	.read_raw = &ssp_accel_read_raw,
+	.write_raw = &ssp_accel_write_raw,
+};
+
+static const unsigned long ssp_accel_scan_mask[] = { 0x7, 0, };
+
+static const struct iio_chan_spec ssp_acc_channels[] = {
+	SSP_CHANNEL_AG(IIO_ACCEL, IIO_MOD_X, SSP_CHANNEL_SCAN_INDEX_X),
+	SSP_CHANNEL_AG(IIO_ACCEL, IIO_MOD_Y, SSP_CHANNEL_SCAN_INDEX_Y),
+	SSP_CHANNEL_AG(IIO_ACCEL, IIO_MOD_Z, SSP_CHANNEL_SCAN_INDEX_Z),
+	SSP_CHAN_TIMESTAMP(SSP_CHANNEL_SCAN_INDEX_TIME),
+};
+
+static int ssp_process_accel_data(struct iio_dev *indio_dev, void *buf,
+				  int64_t timestamp)
+{
+	return ssp_common_process_data(indio_dev, buf, SSP_ACCELEROMETER_SIZE,
+				       timestamp);
+}
+
+static const struct iio_buffer_setup_ops ssp_accel_buffer_ops = {
+	.postenable = &ssp_common_buffer_postenable,
+	.postdisable = &ssp_common_buffer_postdisable,
+};
+
+static int ssp_accel_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct iio_dev *indio_dev;
+	struct ssp_sensor_data *spd;
+	struct iio_buffer *buffer;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*spd));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	spd = iio_priv(indio_dev);
+
+	spd->process_data = ssp_process_accel_data;
+	spd->type = SSP_ACCELEROMETER_SENSOR;
+
+	indio_dev->name = ssp_accel_device_name;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->dev.of_node = pdev->dev.of_node;
+	indio_dev->info = &ssp_accel_iio_info;
+	indio_dev->modes = INDIO_BUFFER_SOFTWARE;
+	indio_dev->channels = ssp_acc_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ssp_acc_channels);
+	indio_dev->available_scan_masks = ssp_accel_scan_mask;
+
+	buffer = devm_iio_kfifo_allocate(&pdev->dev);
+	if (!buffer)
+		return -ENOMEM;
+
+	iio_device_attach_buffer(indio_dev, buffer);
+
+	indio_dev->setup_ops = &ssp_accel_buffer_ops;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	/* ssp registering should be done after all iio setup */
+	ssp_register_consumer(indio_dev, SSP_ACCELEROMETER_SENSOR);
+
+	return 0;
+}
+
+static int ssp_accel_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	iio_device_unregister(indio_dev);
+
+	return 0;
+}
+
+static struct platform_driver ssp_accel_driver = {
+	.driver = {
+		.name = SSP_ACCEL_NAME,
+	},
+	.probe = ssp_accel_probe,
+	.remove =  ssp_accel_remove,
+};
+
+module_platform_driver(ssp_accel_driver);
+
+MODULE_AUTHOR("Karol Wrona <k.wrona@samsung.com>");
+MODULE_DESCRIPTION("Samsung sensorhub accelerometers driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/iio/accel/st_accel.h b/kernel/drivers/iio/accel/st_accel.h
new file mode 100644
index 000000000..7ee9724b1
--- /dev/null
+++ b/kernel/drivers/iio/accel/st_accel.h
@@ -0,0 +1,56 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_ACCEL_H
+#define ST_ACCEL_H
+
+#include <linux/types.h>
+#include <linux/iio/common/st_sensors.h>
+
+#define LIS3LV02DL_ACCEL_DEV_NAME	"lis3lv02dl_accel"
+#define LSM303DLHC_ACCEL_DEV_NAME	"lsm303dlhc_accel"
+#define LIS3DH_ACCEL_DEV_NAME		"lis3dh"
+#define LSM330D_ACCEL_DEV_NAME		"lsm330d_accel"
+#define LSM330DL_ACCEL_DEV_NAME		"lsm330dl_accel"
+#define LSM330DLC_ACCEL_DEV_NAME	"lsm330dlc_accel"
+#define LIS331DLH_ACCEL_DEV_NAME	"lis331dlh"
+#define LSM303DL_ACCEL_DEV_NAME		"lsm303dl_accel"
+#define LSM303DLH_ACCEL_DEV_NAME	"lsm303dlh_accel"
+#define LSM303DLM_ACCEL_DEV_NAME	"lsm303dlm_accel"
+#define LSM330_ACCEL_DEV_NAME		"lsm330_accel"
+
+/**
+* struct st_sensors_platform_data - default accel platform data
+* @drdy_int_pin: default accel DRDY is available on INT1 pin.
+*/
+static const struct st_sensors_platform_data default_accel_pdata = {
+	.drdy_int_pin = 1,
+};
+
+int st_accel_common_probe(struct iio_dev *indio_dev);
+void st_accel_common_remove(struct iio_dev *indio_dev);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_accel_allocate_ring(struct iio_dev *indio_dev);
+void st_accel_deallocate_ring(struct iio_dev *indio_dev);
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state);
+#define ST_ACCEL_TRIGGER_SET_STATE (&st_accel_trig_set_state)
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#define ST_ACCEL_TRIGGER_SET_STATE NULL
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_ACCEL_H */
diff --git a/kernel/drivers/iio/accel/st_accel_buffer.c b/kernel/drivers/iio/accel/st_accel_buffer.c
new file mode 100644
index 000000000..a1e642ee1
--- /dev/null
+++ b/kernel/drivers/iio/accel/st_accel_buffer.c
@@ -0,0 +1,105 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_accel.h"
+
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+
+	return st_sensors_set_dataready_irq(indio_dev, state);
+}
+
+static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
+{
+	return st_sensors_set_enable(indio_dev, true);
+}
+
+static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
+{
+	int err;
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+
+	adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+	if (adata->buffer_data == NULL) {
+		err = -ENOMEM;
+		goto allocate_memory_error;
+	}
+
+	err = st_sensors_set_axis_enable(indio_dev,
+					(u8)indio_dev->active_scan_mask[0]);
+	if (err < 0)
+		goto st_accel_buffer_postenable_error;
+
+	err = iio_triggered_buffer_postenable(indio_dev);
+	if (err < 0)
+		goto st_accel_buffer_postenable_error;
+
+	return err;
+
+st_accel_buffer_postenable_error:
+	kfree(adata->buffer_data);
+allocate_memory_error:
+	return err;
+}
+
+static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
+{
+	int err;
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+
+	err = iio_triggered_buffer_predisable(indio_dev);
+	if (err < 0)
+		goto st_accel_buffer_predisable_error;
+
+	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
+	if (err < 0)
+		goto st_accel_buffer_predisable_error;
+
+	err = st_sensors_set_enable(indio_dev, false);
+
+st_accel_buffer_predisable_error:
+	kfree(adata->buffer_data);
+	return err;
+}
+
+static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
+	.preenable = &st_accel_buffer_preenable,
+	.postenable = &st_accel_buffer_postenable,
+	.predisable = &st_accel_buffer_predisable,
+};
+
+int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+	return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		&st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
+}
+
+void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+	iio_triggered_buffer_cleanup(indio_dev);
+}
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/iio/accel/st_accel_core.c b/kernel/drivers/iio/accel/st_accel_core.c
new file mode 100644
index 000000000..211b13271
--- /dev/null
+++ b/kernel/drivers/iio/accel/st_accel_core.c
@@ -0,0 +1,622 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_accel.h"
+
+#define ST_ACCEL_NUMBER_DATA_CHANNELS		3
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR		0x28
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR		0x2a
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR		0x2c
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G			2
+#define ST_ACCEL_FS_AVL_4G			4
+#define ST_ACCEL_FS_AVL_6G			6
+#define ST_ACCEL_FS_AVL_8G			8
+#define ST_ACCEL_FS_AVL_16G			16
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_ACCEL_1_WAI_EXP			0x33
+#define ST_ACCEL_1_ODR_ADDR			0x20
+#define ST_ACCEL_1_ODR_MASK			0xf0
+#define ST_ACCEL_1_ODR_AVL_1HZ_VAL		0x01
+#define ST_ACCEL_1_ODR_AVL_10HZ_VAL		0x02
+#define ST_ACCEL_1_ODR_AVL_25HZ_VAL		0x03
+#define ST_ACCEL_1_ODR_AVL_50HZ_VAL		0x04
+#define ST_ACCEL_1_ODR_AVL_100HZ_VAL		0x05
+#define ST_ACCEL_1_ODR_AVL_200HZ_VAL		0x06
+#define ST_ACCEL_1_ODR_AVL_400HZ_VAL		0x07
+#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL		0x08
+#define ST_ACCEL_1_FS_ADDR			0x23
+#define ST_ACCEL_1_FS_MASK			0x30
+#define ST_ACCEL_1_FS_AVL_2_VAL			0x00
+#define ST_ACCEL_1_FS_AVL_4_VAL			0x01
+#define ST_ACCEL_1_FS_AVL_8_VAL			0x02
+#define ST_ACCEL_1_FS_AVL_16_VAL		0x03
+#define ST_ACCEL_1_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_1_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_1_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(4000)
+#define ST_ACCEL_1_FS_AVL_16_GAIN		IIO_G_TO_M_S_2(12000)
+#define ST_ACCEL_1_BDU_ADDR			0x23
+#define ST_ACCEL_1_BDU_MASK			0x80
+#define ST_ACCEL_1_DRDY_IRQ_ADDR		0x22
+#define ST_ACCEL_1_DRDY_IRQ_INT1_MASK		0x10
+#define ST_ACCEL_1_DRDY_IRQ_INT2_MASK		0x08
+#define ST_ACCEL_1_MULTIREAD_BIT		true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_ACCEL_2_WAI_EXP			0x32
+#define ST_ACCEL_2_ODR_ADDR			0x20
+#define ST_ACCEL_2_ODR_MASK			0x18
+#define ST_ACCEL_2_ODR_AVL_50HZ_VAL		0x00
+#define ST_ACCEL_2_ODR_AVL_100HZ_VAL		0x01
+#define ST_ACCEL_2_ODR_AVL_400HZ_VAL		0x02
+#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL		0x03
+#define ST_ACCEL_2_PW_ADDR			0x20
+#define ST_ACCEL_2_PW_MASK			0xe0
+#define ST_ACCEL_2_FS_ADDR			0x23
+#define ST_ACCEL_2_FS_MASK			0x30
+#define ST_ACCEL_2_FS_AVL_2_VAL			0X00
+#define ST_ACCEL_2_FS_AVL_4_VAL			0X01
+#define ST_ACCEL_2_FS_AVL_8_VAL			0x03
+#define ST_ACCEL_2_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_2_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_2_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(3900)
+#define ST_ACCEL_2_BDU_ADDR			0x23
+#define ST_ACCEL_2_BDU_MASK			0x80
+#define ST_ACCEL_2_DRDY_IRQ_ADDR		0x22
+#define ST_ACCEL_2_DRDY_IRQ_INT1_MASK		0x02
+#define ST_ACCEL_2_DRDY_IRQ_INT2_MASK		0x10
+#define ST_ACCEL_2_MULTIREAD_BIT		true
+
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_ACCEL_3_WAI_EXP			0x40
+#define ST_ACCEL_3_ODR_ADDR			0x20
+#define ST_ACCEL_3_ODR_MASK			0xf0
+#define ST_ACCEL_3_ODR_AVL_3HZ_VAL		0x01
+#define ST_ACCEL_3_ODR_AVL_6HZ_VAL		0x02
+#define ST_ACCEL_3_ODR_AVL_12HZ_VAL		0x03
+#define ST_ACCEL_3_ODR_AVL_25HZ_VAL		0x04
+#define ST_ACCEL_3_ODR_AVL_50HZ_VAL		0x05
+#define ST_ACCEL_3_ODR_AVL_100HZ_VAL		0x06
+#define ST_ACCEL_3_ODR_AVL_200HZ_VAL		0x07
+#define ST_ACCEL_3_ODR_AVL_400HZ_VAL		0x08
+#define ST_ACCEL_3_ODR_AVL_800HZ_VAL		0x09
+#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL		0x0a
+#define ST_ACCEL_3_FS_ADDR			0x24
+#define ST_ACCEL_3_FS_MASK			0x38
+#define ST_ACCEL_3_FS_AVL_2_VAL			0X00
+#define ST_ACCEL_3_FS_AVL_4_VAL			0X01
+#define ST_ACCEL_3_FS_AVL_6_VAL			0x02
+#define ST_ACCEL_3_FS_AVL_8_VAL			0x03
+#define ST_ACCEL_3_FS_AVL_16_VAL		0x04
+#define ST_ACCEL_3_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(61)
+#define ST_ACCEL_3_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(122)
+#define ST_ACCEL_3_FS_AVL_6_GAIN		IIO_G_TO_M_S_2(183)
+#define ST_ACCEL_3_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(244)
+#define ST_ACCEL_3_FS_AVL_16_GAIN		IIO_G_TO_M_S_2(732)
+#define ST_ACCEL_3_BDU_ADDR			0x20
+#define ST_ACCEL_3_BDU_MASK			0x08
+#define ST_ACCEL_3_DRDY_IRQ_ADDR		0x23
+#define ST_ACCEL_3_DRDY_IRQ_INT1_MASK		0x80
+#define ST_ACCEL_3_DRDY_IRQ_INT2_MASK		0x00
+#define ST_ACCEL_3_IG1_EN_ADDR			0x23
+#define ST_ACCEL_3_IG1_EN_MASK			0x08
+#define ST_ACCEL_3_MULTIREAD_BIT		false
+
+/* CUSTOM VALUES FOR SENSOR 4 */
+#define ST_ACCEL_4_WAI_EXP			0x3a
+#define ST_ACCEL_4_ODR_ADDR			0x20
+#define ST_ACCEL_4_ODR_MASK			0x30 /* DF1 and DF0 */
+#define ST_ACCEL_4_ODR_AVL_40HZ_VAL		0x00
+#define ST_ACCEL_4_ODR_AVL_160HZ_VAL		0x01
+#define ST_ACCEL_4_ODR_AVL_640HZ_VAL		0x02
+#define ST_ACCEL_4_ODR_AVL_2560HZ_VAL		0x03
+#define ST_ACCEL_4_PW_ADDR			0x20
+#define ST_ACCEL_4_PW_MASK			0xc0
+#define ST_ACCEL_4_FS_ADDR			0x21
+#define ST_ACCEL_4_FS_MASK			0x80
+#define ST_ACCEL_4_FS_AVL_2_VAL			0X00
+#define ST_ACCEL_4_FS_AVL_6_VAL			0X01
+#define ST_ACCEL_4_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1024)
+#define ST_ACCEL_4_FS_AVL_6_GAIN		IIO_G_TO_M_S_2(340)
+#define ST_ACCEL_4_BDU_ADDR			0x21
+#define ST_ACCEL_4_BDU_MASK			0x40
+#define ST_ACCEL_4_DRDY_IRQ_ADDR		0x21
+#define ST_ACCEL_4_DRDY_IRQ_INT1_MASK		0x04
+#define ST_ACCEL_4_IG1_EN_ADDR			0x21
+#define ST_ACCEL_4_IG1_EN_MASK			0x08
+#define ST_ACCEL_4_MULTIREAD_BIT		true
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+	IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+	IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensor_settings st_accel_sensors_settings[] = {
+	{
+		.wai = ST_ACCEL_1_WAI_EXP,
+		.sensors_supported = {
+			[0] = LIS3DH_ACCEL_DEV_NAME,
+			[1] = LSM303DLHC_ACCEL_DEV_NAME,
+			[2] = LSM330D_ACCEL_DEV_NAME,
+			[3] = LSM330DL_ACCEL_DEV_NAME,
+			[4] = LSM330DLC_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = ST_ACCEL_1_ODR_ADDR,
+			.mask = ST_ACCEL_1_ODR_MASK,
+			.odr_avl = {
+				{ 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+				{ 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+				{ 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+				{ 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+				{ 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+				{ 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+				{ 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+				{ 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_ACCEL_1_ODR_ADDR,
+			.mask = ST_ACCEL_1_ODR_MASK,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = ST_ACCEL_1_FS_ADDR,
+			.mask = ST_ACCEL_1_FS_MASK,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = ST_ACCEL_1_FS_AVL_2_VAL,
+					.gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = ST_ACCEL_1_FS_AVL_4_VAL,
+					.gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = ST_ACCEL_1_FS_AVL_8_VAL,
+					.gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = ST_ACCEL_1_FS_AVL_16_VAL,
+					.gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+				},
+			},
+		},
+		.bdu = {
+			.addr = ST_ACCEL_1_BDU_ADDR,
+			.mask = ST_ACCEL_1_BDU_MASK,
+		},
+		.drdy_irq = {
+			.addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+			.mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
+			.mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
+		},
+		.multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+		.bootime = 2,
+	},
+	{
+		.wai = ST_ACCEL_2_WAI_EXP,
+		.sensors_supported = {
+			[0] = LIS331DLH_ACCEL_DEV_NAME,
+			[1] = LSM303DL_ACCEL_DEV_NAME,
+			[2] = LSM303DLH_ACCEL_DEV_NAME,
+			[3] = LSM303DLM_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = ST_ACCEL_2_ODR_ADDR,
+			.mask = ST_ACCEL_2_ODR_MASK,
+			.odr_avl = {
+				{ 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
+				{ 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
+				{ 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
+				{ 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_ACCEL_2_PW_ADDR,
+			.mask = ST_ACCEL_2_PW_MASK,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = ST_ACCEL_2_FS_ADDR,
+			.mask = ST_ACCEL_2_FS_MASK,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = ST_ACCEL_2_FS_AVL_2_VAL,
+					.gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = ST_ACCEL_2_FS_AVL_4_VAL,
+					.gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = ST_ACCEL_2_FS_AVL_8_VAL,
+					.gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+				},
+			},
+		},
+		.bdu = {
+			.addr = ST_ACCEL_2_BDU_ADDR,
+			.mask = ST_ACCEL_2_BDU_MASK,
+		},
+		.drdy_irq = {
+			.addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
+			.mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK,
+			.mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
+		},
+		.multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+		.bootime = 2,
+	},
+	{
+		.wai = ST_ACCEL_3_WAI_EXP,
+		.sensors_supported = {
+			[0] = LSM330_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+		.odr = {
+			.addr = ST_ACCEL_3_ODR_ADDR,
+			.mask = ST_ACCEL_3_ODR_MASK,
+			.odr_avl = {
+				{ 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
+				{ 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
+				{ 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
+				{ 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
+				{ 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
+				{ 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
+				{ 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
+				{ 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
+				{ 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
+				{ 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_ACCEL_3_ODR_ADDR,
+			.mask = ST_ACCEL_3_ODR_MASK,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = ST_ACCEL_3_FS_ADDR,
+			.mask = ST_ACCEL_3_FS_MASK,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = ST_ACCEL_3_FS_AVL_2_VAL,
+					.gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = ST_ACCEL_3_FS_AVL_4_VAL,
+					.gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_6G,
+					.value = ST_ACCEL_3_FS_AVL_6_VAL,
+					.gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = ST_ACCEL_3_FS_AVL_8_VAL,
+					.gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+				},
+				[4] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = ST_ACCEL_3_FS_AVL_16_VAL,
+					.gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+				},
+			},
+		},
+		.bdu = {
+			.addr = ST_ACCEL_3_BDU_ADDR,
+			.mask = ST_ACCEL_3_BDU_MASK,
+		},
+		.drdy_irq = {
+			.addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
+			.mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK,
+			.mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK,
+			.ig1 = {
+				.en_addr = ST_ACCEL_3_IG1_EN_ADDR,
+				.en_mask = ST_ACCEL_3_IG1_EN_MASK,
+			},
+		},
+		.multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+		.bootime = 2,
+	},
+	{
+		.wai = ST_ACCEL_4_WAI_EXP,
+		.sensors_supported = {
+			[0] = LIS3LV02DL_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = ST_ACCEL_4_ODR_ADDR,
+			.mask = ST_ACCEL_4_ODR_MASK,
+			.odr_avl = {
+				{ 40, ST_ACCEL_4_ODR_AVL_40HZ_VAL },
+				{ 160, ST_ACCEL_4_ODR_AVL_160HZ_VAL, },
+				{ 640, ST_ACCEL_4_ODR_AVL_640HZ_VAL, },
+				{ 2560, ST_ACCEL_4_ODR_AVL_2560HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_ACCEL_4_PW_ADDR,
+			.mask = ST_ACCEL_4_PW_MASK,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = ST_ACCEL_4_FS_ADDR,
+			.mask = ST_ACCEL_4_FS_MASK,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = ST_ACCEL_4_FS_AVL_2_VAL,
+					.gain = ST_ACCEL_4_FS_AVL_2_GAIN,
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_6G,
+					.value = ST_ACCEL_4_FS_AVL_6_VAL,
+					.gain = ST_ACCEL_4_FS_AVL_6_GAIN,
+				},
+			},
+		},
+		.bdu = {
+			.addr = ST_ACCEL_4_BDU_ADDR,
+			.mask = ST_ACCEL_4_BDU_MASK,
+		},
+		.drdy_irq = {
+			.addr = ST_ACCEL_4_DRDY_IRQ_ADDR,
+			.mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK,
+			.ig1 = {
+				.en_addr = ST_ACCEL_4_IG1_EN_ADDR,
+				.en_mask = ST_ACCEL_4_IG1_EN_MASK,
+			},
+		},
+		.multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
+		.bootime = 2, /* guess */
+	},
+};
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *ch, int *val,
+							int *val2, long mask)
+{
+	int err;
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		err = st_sensors_read_info_raw(indio_dev, ch, val);
+		if (err < 0)
+			goto read_error;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = adata->current_fullscale->gain;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = adata->odr;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+
+read_error:
+	return err;
+}
+
+static int st_accel_write_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+	int err;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2)
+			return -EINVAL;
+		mutex_lock(&indio_dev->mlock);
+		err = st_sensors_set_odr(indio_dev, val);
+		mutex_unlock(&indio_dev->mlock);
+		return err;
+	default:
+		return -EINVAL;
+	}
+
+	return err;
+}
+
+static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
+static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_accel_scale_available);
+
+static struct attribute *st_accel_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+	.attrs = st_accel_attributes,
+};
+
+static const struct iio_info accel_info = {
+	.driver_module = THIS_MODULE,
+	.attrs = &st_accel_attribute_group,
+	.read_raw = &st_accel_read_raw,
+	.write_raw = &st_accel_write_raw,
+};
+
+#ifdef CONFIG_IIO_TRIGGER
+static const struct iio_trigger_ops st_accel_trigger_ops = {
+	.owner = THIS_MODULE,
+	.set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE,
+};
+#define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops)
+#else
+#define ST_ACCEL_TRIGGER_OPS NULL
+#endif
+
+int st_accel_common_probe(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+	int irq = adata->get_irq_data_ready(indio_dev);
+	int err;
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &accel_info;
+	mutex_init(&adata->tb.buf_lock);
+
+	st_sensors_power_enable(indio_dev);
+
+	err = st_sensors_check_device_support(indio_dev,
+					ARRAY_SIZE(st_accel_sensors_settings),
+					st_accel_sensors_settings);
+	if (err < 0)
+		return err;
+
+	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
+	adata->multiread_bit = adata->sensor_settings->multi_read_bit;
+	indio_dev->channels = adata->sensor_settings->ch;
+	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+	adata->current_fullscale = (struct st_sensor_fullscale_avl *)
+					&adata->sensor_settings->fs.fs_avl[0];
+	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
+
+	if (!adata->dev->platform_data)
+		adata->dev->platform_data =
+			(struct st_sensors_platform_data *)&default_accel_pdata;
+
+	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
+	if (err < 0)
+		return err;
+
+	err = st_accel_allocate_ring(indio_dev);
+	if (err < 0)
+		return err;
+
+	if (irq > 0) {
+		err = st_sensors_allocate_trigger(indio_dev,
+						 ST_ACCEL_TRIGGER_OPS);
+		if (err < 0)
+			goto st_accel_probe_trigger_error;
+	}
+
+	err = iio_device_register(indio_dev);
+	if (err)
+		goto st_accel_device_register_error;
+
+	dev_info(&indio_dev->dev, "registered accelerometer %s\n",
+		 indio_dev->name);
+
+	return 0;
+
+st_accel_device_register_error:
+	if (irq > 0)
+		st_sensors_deallocate_trigger(indio_dev);
+st_accel_probe_trigger_error:
+	st_accel_deallocate_ring(indio_dev);
+
+	return err;
+}
+EXPORT_SYMBOL(st_accel_common_probe);
+
+void st_accel_common_remove(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+
+	st_sensors_power_disable(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	if (adata->get_irq_data_ready(indio_dev) > 0)
+		st_sensors_deallocate_trigger(indio_dev);
+
+	st_accel_deallocate_ring(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/iio/accel/st_accel_i2c.c b/kernel/drivers/iio/accel/st_accel_i2c.c
new file mode 100644
index 000000000..6b720c190
--- /dev/null
+++ b/kernel/drivers/iio/accel/st_accel_i2c.c
@@ -0,0 +1,133 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_i2c.h>
+#include "st_accel.h"
+
+#ifdef CONFIG_OF
+static const struct of_device_id st_accel_of_match[] = {
+	{
+		.compatible = "st,lis3lv02dl-accel",
+		.data = LIS3LV02DL_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm303dlh-accel",
+		.data = LSM303DLH_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm303dlhc-accel",
+		.data = LSM303DLHC_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lis3dh-accel",
+		.data = LIS3DH_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330d-accel",
+		.data = LSM330D_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dl-accel",
+		.data = LSM330DL_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dlc-accel",
+		.data = LSM330DLC_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lis331dlh-accel",
+		.data = LIS331DLH_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm303dl-accel",
+		.data = LSM303DL_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm303dlm-accel",
+		.data = LSM303DLM_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330-accel",
+		.data = LSM330_ACCEL_DEV_NAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_accel_of_match);
+#else
+#define st_accel_of_match NULL
+#endif
+
+static int st_accel_i2c_probe(struct i2c_client *client,
+						const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct st_sensor_data *adata;
+	int err;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adata));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adata = iio_priv(indio_dev);
+	st_sensors_of_i2c_probe(client, st_accel_of_match);
+
+	st_sensors_i2c_configure(indio_dev, client, adata);
+
+	err = st_accel_common_probe(indio_dev);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int st_accel_i2c_remove(struct i2c_client *client)
+{
+	st_accel_common_remove(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+static const struct i2c_device_id st_accel_id_table[] = {
+	{ LSM303DLH_ACCEL_DEV_NAME },
+	{ LSM303DLHC_ACCEL_DEV_NAME },
+	{ LIS3DH_ACCEL_DEV_NAME },
+	{ LSM330D_ACCEL_DEV_NAME },
+	{ LSM330DL_ACCEL_DEV_NAME },
+	{ LSM330DLC_ACCEL_DEV_NAME },
+	{ LIS331DLH_ACCEL_DEV_NAME },
+	{ LSM303DL_ACCEL_DEV_NAME },
+	{ LSM303DLM_ACCEL_DEV_NAME },
+	{ LSM330_ACCEL_DEV_NAME },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
+
+static struct i2c_driver st_accel_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "st-accel-i2c",
+		.of_match_table = of_match_ptr(st_accel_of_match),
+	},
+	.probe = st_accel_i2c_probe,
+	.remove = st_accel_i2c_remove,
+	.id_table = st_accel_id_table,
+};
+module_i2c_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/iio/accel/st_accel_spi.c b/kernel/drivers/iio/accel/st_accel_spi.c
new file mode 100644
index 000000000..12ec29389
--- /dev/null
+++ b/kernel/drivers/iio/accel/st_accel_spi.c
@@ -0,0 +1,77 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_spi.h>
+#include "st_accel.h"
+
+static int st_accel_spi_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct st_sensor_data *adata;
+	int err;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adata));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adata = iio_priv(indio_dev);
+
+	st_sensors_spi_configure(indio_dev, spi, adata);
+
+	err = st_accel_common_probe(indio_dev);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int st_accel_spi_remove(struct spi_device *spi)
+{
+	st_accel_common_remove(spi_get_drvdata(spi));
+
+	return 0;
+}
+
+static const struct spi_device_id st_accel_id_table[] = {
+	{ LSM303DLH_ACCEL_DEV_NAME },
+	{ LSM303DLHC_ACCEL_DEV_NAME },
+	{ LIS3DH_ACCEL_DEV_NAME },
+	{ LSM330D_ACCEL_DEV_NAME },
+	{ LSM330DL_ACCEL_DEV_NAME },
+	{ LSM330DLC_ACCEL_DEV_NAME },
+	{ LIS331DLH_ACCEL_DEV_NAME },
+	{ LSM303DL_ACCEL_DEV_NAME },
+	{ LSM303DLM_ACCEL_DEV_NAME },
+	{ LSM330_ACCEL_DEV_NAME },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, st_accel_id_table);
+
+static struct spi_driver st_accel_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "st-accel-spi",
+	},
+	.probe = st_accel_spi_probe,
+	.remove = st_accel_spi_remove,
+	.id_table = st_accel_id_table,
+};
+module_spi_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver");
+MODULE_LICENSE("GPL v2");