These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 50 insertions, 8 deletions

diff --git a/kernel/drivers/hwmon/Kconfig b/kernel/drivers/hwmon/Kconfig
index 25d9e7262..80a73bfc1 100644
--- a/kernel/drivers/hwmon/Kconfig
+++ b/kernel/drivers/hwmon/Kconfig
@@ -321,6 +321,15 @@ config SENSORS_APPLESMC
 	  Say Y here if you have an applicable laptop and want to experience
 	  the awesome power of applesmc.
 
+config SENSORS_ARM_SCPI
+	tristate "ARM SCPI Sensors"
+	depends on ARM_SCPI_PROTOCOL
+	depends on THERMAL || !THERMAL_OF
+	help
+	  This driver provides support for temperature, voltage, current
+	  and power sensors available on ARM Ltd's SCP based platforms. The
+	  actual number and type of sensors exported depend on the platform.
+
 config SENSORS_ASB100
 	tristate "Asus ASB100 Bach"
 	depends on X86 && I2C
@@ -371,6 +380,17 @@ config SENSORS_DS1621
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1621.
 
+config SENSORS_DELL_SMM
+	tristate "Dell laptop SMM BIOS hwmon driver"
+	depends on X86
+	help
+	  This hwmon driver adds support for reporting temperature of different
+	  sensors and controls the fans on Dell laptops via System Management
+	  Mode provided by Dell BIOS.
+
+	  When option I8K is also enabled this driver provides legacy /proc/i8k
+	  userspace interface for i8kutils package.
+
 config SENSORS_DA9052_ADC
 	tristate "Dialog DA9052/DA9053 ADC"
 	depends on PMIC_DA9052
@@ -509,7 +529,7 @@ config SENSORS_G762
 
 config SENSORS_GPIO_FAN
 	tristate "GPIO fan"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	depends on THERMAL || THERMAL=n
 	help
 	  If you say yes here you get support for fans connected to GPIO lines.
@@ -598,8 +618,8 @@ config SENSORS_IT87
 	depends on !PPC
 	select HWMON_VID
 	help
-	  If you say yes here you get support for ITE IT8705F, IT8712F,
-	  IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
+	  If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,
+	  IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,
 	  IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
 	  IT8603E, IT8620E, and IT8623E sensor chips, and the SiS950 clone.
 
@@ -829,6 +849,16 @@ config SENSORS_MAX6697
 	  This driver can also be built as a module.  If so, the module
 	  will be called max6697.
 
+config SENSORS_MAX31790
+	tristate "Maxim MAX31790 sensor chip"
+	depends on I2C
+	help
+	  If you say yes here you get support for 6-Channel PWM-Output
+	  Fan RPM Controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max31790.
+
 config SENSORS_HTU21
 	tristate "Measurement Specialties HTU21D humidity/temperature sensors"
 	depends on I2C
@@ -1106,8 +1136,8 @@ config SENSORS_NTC_THERMISTOR
 	  send notifications about the temperature.
 
 	  Currently, this driver supports
-	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333
-	  from Murata and B57330V2103 from EPCOS.
+	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
+	  and NCP03WF104 from Murata and B57330V2103 from EPCOS.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called ntc-thermistor.
@@ -1129,8 +1159,8 @@ config SENSORS_NCT6775
 	help
 	  If you say yes here you get support for the hardware monitoring
 	  functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
-	  NCT6791D, NCT6792D and compatible Super-I/O chips. This driver
-	  replaces the w83627ehf driver for NCT6775F and NCT6776F.
+	  NCT6791D, NCT6792D, NCT6793D, and compatible Super-I/O chips. This
+	  driver replaces the w83627ehf driver for NCT6775F and NCT6776F.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called nct6775.
@@ -1186,7 +1216,8 @@ config SENSORS_PWM_FAN
 
 config SENSORS_SHT15
 	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
+	select BITREVERSE
 	help
 	  If you say yes here you get support for the Sensiron SHT10, SHT11,
 	  SHT15, SHT71, SHT75 humidity and temperature sensors.
@@ -1442,6 +1473,7 @@ config SENSORS_INA209
 config SENSORS_INA2XX
 	tristate "Texas Instruments INA219 and compatibles"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for INA219, INA220, INA226,
 	  INA230, and INA231 power monitor chips.
@@ -1452,6 +1484,16 @@ config SENSORS_INA2XX
 	  This driver can also be built as a module.  If so, the module
 	  will be called ina2xx.
 
+config SENSORS_TC74
+	tristate "Microchip TC74"
+	depends on I2C
+	help
+	  If you say yes here you get support for Microchip TC74 single
+	  input temperature sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tc74.
+
 config SENSORS_THMC50
 	tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
 	depends on I2C