From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- kernel/drivers/hwmon/Kconfig | 58 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 50 insertions(+), 8 deletions(-) (limited to 'kernel/drivers/hwmon/Kconfig') diff --git a/kernel/drivers/hwmon/Kconfig b/kernel/drivers/hwmon/Kconfig index 25d9e7262..80a73bfc1 100644 --- a/kernel/drivers/hwmon/Kconfig +++ b/kernel/drivers/hwmon/Kconfig @@ -321,6 +321,15 @@ config SENSORS_APPLESMC Say Y here if you have an applicable laptop and want to experience the awesome power of applesmc. +config SENSORS_ARM_SCPI + tristate "ARM SCPI Sensors" + depends on ARM_SCPI_PROTOCOL + depends on THERMAL || !THERMAL_OF + help + This driver provides support for temperature, voltage, current + and power sensors available on ARM Ltd's SCP based platforms. The + actual number and type of sensors exported depend on the platform. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on X86 && I2C @@ -371,6 +380,17 @@ config SENSORS_DS1621 This driver can also be built as a module. If so, the module will be called ds1621. +config SENSORS_DELL_SMM + tristate "Dell laptop SMM BIOS hwmon driver" + depends on X86 + help + This hwmon driver adds support for reporting temperature of different + sensors and controls the fans on Dell laptops via System Management + Mode provided by Dell BIOS. + + When option I8K is also enabled this driver provides legacy /proc/i8k + userspace interface for i8kutils package. + config SENSORS_DA9052_ADC tristate "Dialog DA9052/DA9053 ADC" depends on PMIC_DA9052 @@ -509,7 +529,7 @@ config SENSORS_G762 config SENSORS_GPIO_FAN tristate "GPIO fan" - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST depends on THERMAL || THERMAL=n help If you say yes here you get support for fans connected to GPIO lines. @@ -598,8 +618,8 @@ config SENSORS_IT87 depends on !PPC select HWMON_VID help - If you say yes here you get support for ITE IT8705F, IT8712F, - IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, + If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, + IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, IT8603E, IT8620E, and IT8623E sensor chips, and the SiS950 clone. @@ -829,6 +849,16 @@ config SENSORS_MAX6697 This driver can also be built as a module. If so, the module will be called max6697. +config SENSORS_MAX31790 + tristate "Maxim MAX31790 sensor chip" + depends on I2C + help + If you say yes here you get support for 6-Channel PWM-Output + Fan RPM Controller. + + This driver can also be built as a module. If so, the module + will be called max31790. + config SENSORS_HTU21 tristate "Measurement Specialties HTU21D humidity/temperature sensors" depends on I2C @@ -1106,8 +1136,8 @@ config SENSORS_NTC_THERMISTOR send notifications about the temperature. Currently, this driver supports - NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333 - from Murata and B57330V2103 from EPCOS. + NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, + and NCP03WF104 from Murata and B57330V2103 from EPCOS. This driver can also be built as a module. If so, the module will be called ntc-thermistor. @@ -1129,8 +1159,8 @@ config SENSORS_NCT6775 help If you say yes here you get support for the hardware monitoring functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, - NCT6791D, NCT6792D and compatible Super-I/O chips. This driver - replaces the w83627ehf driver for NCT6775F and NCT6776F. + NCT6791D, NCT6792D, NCT6793D, and compatible Super-I/O chips. This + driver replaces the w83627ehf driver for NCT6775F and NCT6776F. This driver can also be built as a module. If so, the module will be called nct6775. @@ -1186,7 +1216,8 @@ config SENSORS_PWM_FAN config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST + select BITREVERSE help If you say yes here you get support for the Sensiron SHT10, SHT11, SHT15, SHT71, SHT75 humidity and temperature sensors. @@ -1442,6 +1473,7 @@ config SENSORS_INA209 config SENSORS_INA2XX tristate "Texas Instruments INA219 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for INA219, INA220, INA226, INA230, and INA231 power monitor chips. @@ -1452,6 +1484,16 @@ config SENSORS_INA2XX This driver can also be built as a module. If so, the module will be called ina2xx. +config SENSORS_TC74 + tristate "Microchip TC74" + depends on I2C + help + If you say yes here you get support for Microchip TC74 single + input temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tc74. + config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" depends on I2C -- cgit 1.2.3-korg