diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/arch/mips/netlogic/xlp | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/arch/mips/netlogic/xlp')
-rw-r--r-- | kernel/arch/mips/netlogic/xlp/Makefile | 10 | ||||
-rw-r--r-- | kernel/arch/mips/netlogic/xlp/ahci-init-xlp2.c | 390 | ||||
-rw-r--r-- | kernel/arch/mips/netlogic/xlp/ahci-init.c | 209 | ||||
-rw-r--r-- | kernel/arch/mips/netlogic/xlp/cop2-ex.c | 118 | ||||
-rw-r--r-- | kernel/arch/mips/netlogic/xlp/dt.c | 110 | ||||
-rw-r--r-- | kernel/arch/mips/netlogic/xlp/nlm_hal.c | 506 | ||||
-rw-r--r-- | kernel/arch/mips/netlogic/xlp/setup.c | 179 | ||||
-rw-r--r-- | kernel/arch/mips/netlogic/xlp/usb-init-xlp2.c | 288 | ||||
-rw-r--r-- | kernel/arch/mips/netlogic/xlp/usb-init.c | 149 | ||||
-rw-r--r-- | kernel/arch/mips/netlogic/xlp/wakeup.c | 212 |
10 files changed, 2171 insertions, 0 deletions
diff --git a/kernel/arch/mips/netlogic/xlp/Makefile b/kernel/arch/mips/netlogic/xlp/Makefile new file mode 100644 index 000000000..6b43af0a3 --- /dev/null +++ b/kernel/arch/mips/netlogic/xlp/Makefile @@ -0,0 +1,10 @@ +obj-y += setup.o nlm_hal.o cop2-ex.o dt.o +obj-$(CONFIG_SMP) += wakeup.o +ifdef CONFIG_USB +obj-y += usb-init.o +obj-y += usb-init-xlp2.o +endif +ifdef CONFIG_SATA_AHCI +obj-y += ahci-init.o +obj-y += ahci-init-xlp2.o +endif diff --git a/kernel/arch/mips/netlogic/xlp/ahci-init-xlp2.c b/kernel/arch/mips/netlogic/xlp/ahci-init-xlp2.c new file mode 100644 index 000000000..7b066a44e --- /dev/null +++ b/kernel/arch/mips/netlogic/xlp/ahci-init-xlp2.c @@ -0,0 +1,390 @@ +/* + * Copyright (c) 2003-2014 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/bitops.h> +#include <linux/pci_ids.h> +#include <linux/nodemask.h> + +#include <asm/cpu.h> +#include <asm/mipsregs.h> + +#include <asm/netlogic/common.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/mips-extns.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/iomap.h> + +#define SATA_CTL 0x0 +#define SATA_STATUS 0x1 /* Status Reg */ +#define SATA_INT 0x2 /* Interrupt Reg */ +#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */ +#define SATA_BIU_TIMEOUT 0x4 +#define AXIWRSPERRLOG 0x5 +#define AXIRDSPERRLOG 0x6 +#define BiuTimeoutLow 0x7 +#define BiuTimeoutHi 0x8 +#define BiuSlvErLow 0x9 +#define BiuSlvErHi 0xa +#define IO_CONFIG_SWAP_DIS 0xb +#define CR_REG_TIMER 0xc +#define CORE_ID 0xd +#define AXI_SLAVE_OPT1 0xe +#define PHY_MEM_ACCESS 0xf +#define PHY0_CNTRL 0x10 +#define PHY0_STAT 0x11 +#define PHY0_RX_ALIGN 0x12 +#define PHY0_RX_EQ_LO 0x13 +#define PHY0_RX_EQ_HI 0x14 +#define PHY0_BIST_LOOP 0x15 +#define PHY1_CNTRL 0x16 +#define PHY1_STAT 0x17 +#define PHY1_RX_ALIGN 0x18 +#define PHY1_RX_EQ_LO 0x19 +#define PHY1_RX_EQ_HI 0x1a +#define PHY1_BIST_LOOP 0x1b +#define RdExBase 0x1c +#define RdExLimit 0x1d +#define CacheAllocBase 0x1e +#define CacheAllocLimit 0x1f +#define BiuSlaveCmdGstNum 0x20 + +/*SATA_CTL Bits */ +#define SATA_RST_N BIT(0) /* Active low reset sata_core phy */ +#define SataCtlReserve0 BIT(1) +#define M_CSYSREQ BIT(2) /* AXI master low power, not used */ +#define S_CSYSREQ BIT(3) /* AXI slave low power, not used */ +#define P0_CP_DET BIT(8) /* Reserved, bring in from pad */ +#define P0_MP_SW BIT(9) /* Mech Switch */ +#define P0_DISABLE BIT(10) /* disable p0 */ +#define P0_ACT_LED_EN BIT(11) /* Active LED enable */ +#define P0_IRST_HARD_SYNTH BIT(12) /* PHY hard synth reset */ +#define P0_IRST_HARD_TXRX BIT(13) /* PHY lane hard reset */ +#define P0_IRST_POR BIT(14) /* PHY power on reset*/ +#define P0_IPDTXL BIT(15) /* PHY Tx lane dis/power down */ +#define P0_IPDRXL BIT(16) /* PHY Rx lane dis/power down */ +#define P0_IPDIPDMSYNTH BIT(17) /* PHY synthesizer dis/porwer down */ +#define P0_CP_POD_EN BIT(18) /* CP_POD enable */ +#define P0_AT_BYPASS BIT(19) /* P0 address translation by pass */ +#define P1_CP_DET BIT(20) /* Reserved,Cold Detect */ +#define P1_MP_SW BIT(21) /* Mech Switch */ +#define P1_DISABLE BIT(22) /* disable p1 */ +#define P1_ACT_LED_EN BIT(23) /* Active LED enable */ +#define P1_IRST_HARD_SYNTH BIT(24) /* PHY hard synth reset */ +#define P1_IRST_HARD_TXRX BIT(25) /* PHY lane hard reset */ +#define P1_IRST_POR BIT(26) /* PHY power on reset*/ +#define P1_IPDTXL BIT(27) /* PHY Tx lane dis/porwer down */ +#define P1_IPDRXL BIT(28) /* PHY Rx lane dis/porwer down */ +#define P1_IPDIPDMSYNTH BIT(29) /* PHY synthesizer dis/porwer down */ +#define P1_CP_POD_EN BIT(30) +#define P1_AT_BYPASS BIT(31) /* P1 address translation by pass */ + +/* Status register */ +#define M_CACTIVE BIT(0) /* m_cactive, not used */ +#define S_CACTIVE BIT(1) /* s_cactive, not used */ +#define P0_PHY_READY BIT(8) /* phy is ready */ +#define P0_CP_POD BIT(9) /* Cold PowerOn */ +#define P0_SLUMBER BIT(10) /* power mode slumber */ +#define P0_PATIAL BIT(11) /* power mode patial */ +#define P0_PHY_SIG_DET BIT(12) /* phy dignal detect */ +#define P0_PHY_CALI BIT(13) /* phy calibration done */ +#define P1_PHY_READY BIT(16) /* phy is ready */ +#define P1_CP_POD BIT(17) /* Cold PowerOn */ +#define P1_SLUMBER BIT(18) /* power mode slumber */ +#define P1_PATIAL BIT(19) /* power mode patial */ +#define P1_PHY_SIG_DET BIT(20) /* phy dignal detect */ +#define P1_PHY_CALI BIT(21) /* phy calibration done */ + +/* SATA CR_REG_TIMER bits */ +#define CR_TIME_SCALE (0x1000 << 0) + +/* SATA PHY specific registers start and end address */ +#define RXCDRCALFOSC0 0x0065 +#define CALDUTY 0x006e +#define RXDPIF 0x8065 +#define PPMDRIFTMAX_HI 0x80A4 + +#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_sata_pcibase(node) \ + nlm_pcicfg_base(XLP9XX_IO_SATA_OFFSET(node)) +#define nlm_get_sata_regbase(node) \ + (nlm_get_sata_pcibase(node) + 0x100) + +/* SATA PHY config for register block 1 0x0065 .. 0x006e */ +static const u8 sata_phy_config1[] = { + 0xC9, 0xC9, 0x07, 0x07, 0x18, 0x18, 0x01, 0x01, 0x22, 0x00 +}; + +/* SATA PHY config for register block 2 0x0x8065 .. 0x0x80A4 */ +static const u8 sata_phy_config2[] = { + 0xAA, 0x00, 0x4C, 0xC9, 0xC9, 0x07, 0x07, 0x18, + 0x18, 0x05, 0x0C, 0x10, 0x00, 0x10, 0x00, 0xFF, + 0xCF, 0xF7, 0xE1, 0xF5, 0xFD, 0xFD, 0xFF, 0xFF, + 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5, 0xFD, 0xFD, + 0xF5, 0xF5, 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5, + 0xFD, 0xFD, 0xF5, 0xF5, 0xFF, 0xFF, 0xFF, 0xF5, + 0x3F, 0x00, 0x32, 0x00, 0x03, 0x01, 0x05, 0x05, + 0x04, 0x00, 0x00, 0x08, 0x04, 0x00, 0x00, 0x04, +}; + +const int sata_phy_debug = 0; /* set to verify PHY writes */ + +static void sata_clear_glue_reg(u64 regbase, u32 off, u32 bit) +{ + u32 reg_val; + + reg_val = nlm_read_sata_reg(regbase, off); + nlm_write_sata_reg(regbase, off, (reg_val & ~bit)); +} + +static void sata_set_glue_reg(u64 regbase, u32 off, u32 bit) +{ + u32 reg_val; + + reg_val = nlm_read_sata_reg(regbase, off); + nlm_write_sata_reg(regbase, off, (reg_val | bit)); +} + +static void write_phy_reg(u64 regbase, u32 addr, u32 physel, u8 data) +{ + nlm_write_sata_reg(regbase, PHY_MEM_ACCESS, + (1u << 31) | (physel << 24) | (data << 16) | addr); + udelay(850); +} + +static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel) +{ + u32 val; + + nlm_write_sata_reg(regbase, PHY_MEM_ACCESS, + (0 << 31) | (physel << 24) | (0 << 16) | addr); + udelay(850); + val = nlm_read_sata_reg(regbase, PHY_MEM_ACCESS); + return (val >> 16) & 0xff; +} + +static void config_sata_phy(u64 regbase) +{ + u32 port, i, reg; + u8 val; + + for (port = 0; port < 2; port++) { + for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++) + write_phy_reg(regbase, reg, port, sata_phy_config1[i]); + + for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++) + write_phy_reg(regbase, reg, port, sata_phy_config2[i]); + + /* Fix for PHY link up failures at lower temperatures */ + write_phy_reg(regbase, 0x800F, port, 0x1f); + + val = read_phy_reg(regbase, 0x0029, port); + write_phy_reg(regbase, 0x0029, port, val | (0x7 << 1)); + + val = read_phy_reg(regbase, 0x0056, port); + write_phy_reg(regbase, 0x0056, port, val & ~(1 << 3)); + + val = read_phy_reg(regbase, 0x0018, port); + write_phy_reg(regbase, 0x0018, port, val & ~(0x7 << 0)); + } +} + +static void check_phy_register(u64 regbase, u32 addr, u32 physel, u8 xdata) +{ + u8 data; + + data = read_phy_reg(regbase, addr, physel); + pr_info("PHY read addr = 0x%x physel = %d data = 0x%x %s\n", + addr, physel, data, data == xdata ? "TRUE" : "FALSE"); +} + +static void verify_sata_phy_config(u64 regbase) +{ + u32 port, i, reg; + + for (port = 0; port < 2; port++) { + for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++) + check_phy_register(regbase, reg, port, + sata_phy_config1[i]); + + for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++) + check_phy_register(regbase, reg, port, + sata_phy_config2[i]); + } +} + +static void nlm_sata_firmware_init(int node) +{ + u32 reg_val; + u64 regbase; + int n; + + pr_info("Initializing XLP9XX On-chip AHCI...\n"); + regbase = nlm_get_sata_regbase(node); + + /* Reset port0 */ + sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_POR); + sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX); + sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH); + sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDTXL); + sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDRXL); + sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH); + + /* port1 */ + sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_POR); + sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX); + sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH); + sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDTXL); + sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDRXL); + sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH); + udelay(300); + + /* Set PHY */ + sata_set_glue_reg(regbase, SATA_CTL, P0_IPDTXL); + sata_set_glue_reg(regbase, SATA_CTL, P0_IPDRXL); + sata_set_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH); + sata_set_glue_reg(regbase, SATA_CTL, P1_IPDTXL); + sata_set_glue_reg(regbase, SATA_CTL, P1_IPDRXL); + sata_set_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH); + + udelay(1000); + sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_POR); + udelay(1000); + sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_POR); + udelay(1000); + + /* setup PHY */ + config_sata_phy(regbase); + if (sata_phy_debug) + verify_sata_phy_config(regbase); + + udelay(1000); + sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX); + sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH); + sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX); + sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH); + udelay(300); + + /* Override reset in serial PHY mode */ + sata_set_glue_reg(regbase, CR_REG_TIMER, CR_TIME_SCALE); + /* Set reset SATA */ + sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N); + sata_set_glue_reg(regbase, SATA_CTL, M_CSYSREQ); + sata_set_glue_reg(regbase, SATA_CTL, S_CSYSREQ); + + pr_debug("Waiting for PHYs to come up.\n"); + n = 10000; + do { + reg_val = nlm_read_sata_reg(regbase, SATA_STATUS); + if ((reg_val & P1_PHY_READY) && (reg_val & P0_PHY_READY)) + break; + udelay(10); + } while (--n > 0); + + if (reg_val & P0_PHY_READY) + pr_info("PHY0 is up.\n"); + else + pr_info("PHY0 is down.\n"); + if (reg_val & P1_PHY_READY) + pr_info("PHY1 is up.\n"); + else + pr_info("PHY1 is down.\n"); + + pr_info("XLP AHCI Init Done.\n"); +} + +static int __init nlm_ahci_init(void) +{ + int node; + + if (!cpu_is_xlp9xx()) + return 0; + for (node = 0; node < NLM_NR_NODES; node++) + if (nlm_node_present(node)) + nlm_sata_firmware_init(node); + return 0; +} + +static void nlm_sata_intr_ack(struct irq_data *data) +{ + u64 regbase; + u32 val; + int node; + + node = data->irq / NLM_IRQS_PER_NODE; + regbase = nlm_get_sata_regbase(node); + val = nlm_read_sata_reg(regbase, SATA_INT); + sata_set_glue_reg(regbase, SATA_INT, val); +} + +static void nlm_sata_fixup_bar(struct pci_dev *dev) +{ + dev->resource[5] = dev->resource[0]; + memset(&dev->resource[0], 0, sizeof(dev->resource[0])); +} + +static void nlm_sata_fixup_final(struct pci_dev *dev) +{ + u32 val; + u64 regbase; + int node; + + /* Find end bridge function to find node */ + node = xlp_socdev_to_node(dev); + regbase = nlm_get_sata_regbase(node); + + /* clear pending interrupts and then enable them */ + val = nlm_read_sata_reg(regbase, SATA_INT); + sata_set_glue_reg(regbase, SATA_INT, val); + + /* Enable only the core interrupt */ + sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1); + + dev->irq = nlm_irq_to_xirq(node, PIC_SATA_IRQ); + nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack); +} + +arch_initcall(nlm_ahci_init); + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA, + nlm_sata_fixup_bar); + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA, + nlm_sata_fixup_final); diff --git a/kernel/arch/mips/netlogic/xlp/ahci-init.c b/kernel/arch/mips/netlogic/xlp/ahci-init.c new file mode 100644 index 000000000..92be1a325 --- /dev/null +++ b/kernel/arch/mips/netlogic/xlp/ahci-init.c @@ -0,0 +1,209 @@ +/* + * Copyright (c) 2003-2014 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/bitops.h> + +#include <asm/cpu.h> +#include <asm/mipsregs.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/common.h> +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/mips-extns.h> + +#define SATA_CTL 0x0 +#define SATA_STATUS 0x1 /* Status Reg */ +#define SATA_INT 0x2 /* Interrupt Reg */ +#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */ +#define SATA_CR_REG_TIMER 0x4 /* PHY Conrol Timer Reg */ +#define SATA_CORE_ID 0x5 /* Core ID Reg */ +#define SATA_AXI_SLAVE_OPT1 0x6 /* AXI Slave Options Reg */ +#define SATA_PHY_LOS_LEV 0x7 /* PHY LOS Level Reg */ +#define SATA_PHY_MULTI 0x8 /* PHY Multiplier Reg */ +#define SATA_PHY_CLK_SEL 0x9 /* Clock Select Reg */ +#define SATA_PHY_AMP1_GEN1 0xa /* PHY Transmit Amplitude Reg 1 */ +#define SATA_PHY_AMP1_GEN2 0xb /* PHY Transmit Amplitude Reg 2 */ +#define SATA_PHY_AMP1_GEN3 0xc /* PHY Transmit Amplitude Reg 3 */ +#define SATA_PHY_PRE1 0xd /* PHY Transmit Preemphasis Reg 1 */ +#define SATA_PHY_PRE2 0xe /* PHY Transmit Preemphasis Reg 2 */ +#define SATA_PHY_PRE3 0xf /* PHY Transmit Preemphasis Reg 3 */ +#define SATA_SPDMODE 0x10 /* Speed Mode Reg */ +#define SATA_REFCLK 0x11 /* Reference Clock Control Reg */ +#define SATA_BYTE_SWAP_DIS 0x12 /* byte swap disable */ + +/*SATA_CTL Bits */ +#define SATA_RST_N BIT(0) +#define PHY0_RESET_N BIT(16) +#define PHY1_RESET_N BIT(17) +#define PHY2_RESET_N BIT(18) +#define PHY3_RESET_N BIT(19) +#define M_CSYSREQ BIT(2) +#define S_CSYSREQ BIT(3) + +/*SATA_STATUS Bits */ +#define P0_PHY_READY BIT(4) +#define P1_PHY_READY BIT(5) +#define P2_PHY_READY BIT(6) +#define P3_PHY_READY BIT(7) + +#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_sata_pcibase(node) \ + nlm_pcicfg_base(XLP_IO_SATA_OFFSET(node)) +/* SATA device specific configuration registers are starts at 0x900 offset */ +#define nlm_get_sata_regbase(node) \ + (nlm_get_sata_pcibase(node) + 0x900) + +static void sata_clear_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit) +{ + uint32_t reg_val; + + reg_val = nlm_read_sata_reg(regbase, off); + nlm_write_sata_reg(regbase, off, (reg_val & ~bit)); +} + +static void sata_set_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit) +{ + uint32_t reg_val; + + reg_val = nlm_read_sata_reg(regbase, off); + nlm_write_sata_reg(regbase, off, (reg_val | bit)); +} + +static void nlm_sata_firmware_init(int node) +{ + uint32_t reg_val; + uint64_t regbase; + int i; + + pr_info("XLP AHCI Initialization started.\n"); + regbase = nlm_get_sata_regbase(node); + + /* Reset SATA */ + sata_clear_glue_reg(regbase, SATA_CTL, SATA_RST_N); + /* Reset PHY */ + sata_clear_glue_reg(regbase, SATA_CTL, + (PHY3_RESET_N | PHY2_RESET_N + | PHY1_RESET_N | PHY0_RESET_N)); + + /* Set SATA */ + sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N); + /* Set PHY */ + sata_set_glue_reg(regbase, SATA_CTL, + (PHY3_RESET_N | PHY2_RESET_N + | PHY1_RESET_N | PHY0_RESET_N)); + + pr_debug("Waiting for PHYs to come up.\n"); + i = 0; + do { + reg_val = nlm_read_sata_reg(regbase, SATA_STATUS); + i++; + } while (((reg_val & 0xF0) != 0xF0) && (i < 10000)); + + for (i = 0; i < 4; i++) { + if (reg_val & (P0_PHY_READY << i)) + pr_info("PHY%d is up.\n", i); + else + pr_info("PHY%d is down.\n", i); + } + + pr_info("XLP AHCI init done.\n"); +} + +static int __init nlm_ahci_init(void) +{ + int node = 0; + int chip = read_c0_prid() & PRID_IMP_MASK; + + if (chip == PRID_IMP_NETLOGIC_XLP3XX) + nlm_sata_firmware_init(node); + return 0; +} + +static void nlm_sata_intr_ack(struct irq_data *data) +{ + uint32_t val = 0; + uint64_t regbase; + + regbase = nlm_get_sata_regbase(nlm_nodeid()); + val = nlm_read_sata_reg(regbase, SATA_INT); + sata_set_glue_reg(regbase, SATA_INT, val); +} + +static void nlm_sata_fixup_bar(struct pci_dev *dev) +{ + /* + * The AHCI resource is in BAR 0, move it to + * BAR 5, where it is expected + */ + dev->resource[5] = dev->resource[0]; + memset(&dev->resource[0], 0, sizeof(dev->resource[0])); +} + +static void nlm_sata_fixup_final(struct pci_dev *dev) +{ + uint32_t val; + uint64_t regbase; + int node = 0; /* XLP3XX does not support multi-node */ + + regbase = nlm_get_sata_regbase(node); + + /* clear pending interrupts and then enable them */ + val = nlm_read_sata_reg(regbase, SATA_INT); + sata_set_glue_reg(regbase, SATA_INT, val); + + /* Mask the core interrupt. If all the interrupts + * are enabled there are spurious interrupt flow + * happening, to avoid only enable core interrupt + * mask. + */ + sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1); + + dev->irq = PIC_SATA_IRQ; + nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack); +} + +arch_initcall(nlm_ahci_init); + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA, + nlm_sata_fixup_bar); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA, + nlm_sata_fixup_final); diff --git a/kernel/arch/mips/netlogic/xlp/cop2-ex.c b/kernel/arch/mips/netlogic/xlp/cop2-ex.c new file mode 100644 index 000000000..52bc5de42 --- /dev/null +++ b/kernel/arch/mips/netlogic/xlp/cop2-ex.c @@ -0,0 +1,118 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2013 Broadcom Corporation. + * + * based on arch/mips/cavium-octeon/cpu.c + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/init.h> +#include <linux/irqflags.h> +#include <linux/notifier.h> +#include <linux/prefetch.h> +#include <linux/sched.h> + +#include <asm/cop2.h> +#include <asm/current.h> +#include <asm/mipsregs.h> +#include <asm/page.h> + +#include <asm/netlogic/mips-extns.h> + +/* + * 64 bit ops are done in inline assembly to support 32 bit + * compilation + */ +void nlm_cop2_save(struct nlm_cop2_state *r) +{ + asm volatile( + ".set push\n" + ".set noat\n" + "dmfc2 $1, $0, 0\n" + "sd $1, 0(%1)\n" + "dmfc2 $1, $0, 1\n" + "sd $1, 8(%1)\n" + "dmfc2 $1, $0, 2\n" + "sd $1, 16(%1)\n" + "dmfc2 $1, $0, 3\n" + "sd $1, 24(%1)\n" + "dmfc2 $1, $1, 0\n" + "sd $1, 0(%2)\n" + "dmfc2 $1, $1, 1\n" + "sd $1, 8(%2)\n" + "dmfc2 $1, $1, 2\n" + "sd $1, 16(%2)\n" + "dmfc2 $1, $1, 3\n" + "sd $1, 24(%2)\n" + ".set pop\n" + : "=m"(*r) + : "r"(r->tx), "r"(r->rx)); + + r->tx_msg_status = __read_32bit_c2_register($2, 0); + r->rx_msg_status = __read_32bit_c2_register($3, 0) & 0x0fffffff; +} + +void nlm_cop2_restore(struct nlm_cop2_state *r) +{ + u32 rstat; + + asm volatile( + ".set push\n" + ".set noat\n" + "ld $1, 0(%1)\n" + "dmtc2 $1, $0, 0\n" + "ld $1, 8(%1)\n" + "dmtc2 $1, $0, 1\n" + "ld $1, 16(%1)\n" + "dmtc2 $1, $0, 2\n" + "ld $1, 24(%1)\n" + "dmtc2 $1, $0, 3\n" + "ld $1, 0(%2)\n" + "dmtc2 $1, $1, 0\n" + "ld $1, 8(%2)\n" + "dmtc2 $1, $1, 1\n" + "ld $1, 16(%2)\n" + "dmtc2 $1, $1, 2\n" + "ld $1, 24(%2)\n" + "dmtc2 $1, $1, 3\n" + ".set pop\n" + : : "m"(*r), "r"(r->tx), "r"(r->rx)); + + __write_32bit_c2_register($2, 0, r->tx_msg_status); + rstat = __read_32bit_c2_register($3, 0) & 0xf0000000u; + __write_32bit_c2_register($3, 0, r->rx_msg_status | rstat); +} + +static int nlm_cu2_call(struct notifier_block *nfb, unsigned long action, + void *data) +{ + unsigned long flags; + unsigned int status; + + switch (action) { + case CU2_EXCEPTION: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + break; + local_irq_save(flags); + KSTK_STATUS(current) |= ST0_CU2; + status = read_c0_status(); + write_c0_status(status | ST0_CU2); + nlm_cop2_restore(&(current->thread.cp2)); + write_c0_status(status & ~ST0_CU2); + local_irq_restore(flags); + pr_info("COP2 access enabled for pid %d (%s)\n", + current->pid, current->comm); + return NOTIFY_BAD; /* Don't call default notifier */ + } + + return NOTIFY_OK; /* Let default notifier send signals */ +} + +static int __init nlm_cu2_setup(void) +{ + return cu2_notifier(nlm_cu2_call, 0); +} +early_initcall(nlm_cu2_setup); diff --git a/kernel/arch/mips/netlogic/xlp/dt.c b/kernel/arch/mips/netlogic/xlp/dt.c new file mode 100644 index 000000000..a625bdb6d --- /dev/null +++ b/kernel/arch/mips/netlogic/xlp/dt.c @@ -0,0 +1,110 @@ +/* + * Copyright 2003-2013 Broadcom Corporation. + * All Rights Reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/bootmem.h> + +#include <linux/of_fdt.h> +#include <linux/of_platform.h> +#include <linux/of_device.h> + +#include <asm/prom.h> + +extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_xlp_fvp_begin[], + __dtb_xlp_gvp_begin[], __dtb_xlp_rvp_begin[]; +static void *xlp_fdt_blob; + +void __init *xlp_dt_init(void *fdtp) +{ + if (!fdtp) { + switch (current_cpu_data.processor_id & PRID_IMP_MASK) { +#ifdef CONFIG_DT_XLP_RVP + case PRID_IMP_NETLOGIC_XLP5XX: + fdtp = __dtb_xlp_rvp_begin; + break; +#endif +#ifdef CONFIG_DT_XLP_GVP + case PRID_IMP_NETLOGIC_XLP9XX: + fdtp = __dtb_xlp_gvp_begin; + break; +#endif +#ifdef CONFIG_DT_XLP_FVP + case PRID_IMP_NETLOGIC_XLP2XX: + fdtp = __dtb_xlp_fvp_begin; + break; +#endif +#ifdef CONFIG_DT_XLP_SVP + case PRID_IMP_NETLOGIC_XLP3XX: + fdtp = __dtb_xlp_svp_begin; + break; +#endif +#ifdef CONFIG_DT_XLP_EVP + case PRID_IMP_NETLOGIC_XLP8XX: + fdtp = __dtb_xlp_evp_begin; + break; +#endif + default: + /* Pick a built-in if any, and hope for the best */ + fdtp = __dtb_start; + break; + } + } + xlp_fdt_blob = fdtp; + return fdtp; +} + +void __init xlp_early_init_devtree(void) +{ + __dt_setup_arch(xlp_fdt_blob); + strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); +} + +void __init device_tree_init(void) +{ + unflatten_and_copy_device_tree(); +} + +static struct of_device_id __initdata xlp_ids[] = { + { .compatible = "simple-bus", }, + {}, +}; + +int __init xlp8xx_ds_publish_devices(void) +{ + if (!of_have_populated_dt()) + return 0; + return of_platform_bus_probe(NULL, xlp_ids, NULL); +} + +device_initcall(xlp8xx_ds_publish_devices); diff --git a/kernel/arch/mips/netlogic/xlp/nlm_hal.c b/kernel/arch/mips/netlogic/xlp/nlm_hal.c new file mode 100644 index 000000000..a8f4144a0 --- /dev/null +++ b/kernel/arch/mips/netlogic/xlp/nlm_hal.c @@ -0,0 +1,506 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/delay.h> + +#include <asm/mipsregs.h> +#include <asm/time.h> + +#include <asm/netlogic/common.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/bridge.h> +#include <asm/netlogic/xlp-hal/pic.h> +#include <asm/netlogic/xlp-hal/sys.h> + +/* Main initialization */ +void nlm_node_init(int node) +{ + struct nlm_soc_info *nodep; + + nodep = nlm_get_node(node); + if (node == 0) + nodep->coremask = 1; /* node 0, boot cpu */ + nodep->sysbase = nlm_get_sys_regbase(node); + nodep->picbase = nlm_get_pic_regbase(node); + nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1)); + if (cpu_is_xlp9xx()) + nodep->socbus = xlp9xx_get_socbus(node); + else + nodep->socbus = 0; + spin_lock_init(&nodep->piclock); +} + +static int xlp9xx_irq_to_irt(int irq) +{ + switch (irq) { + case PIC_GPIO_IRQ: + return 12; + case PIC_I2C_0_IRQ: + return 125; + case PIC_I2C_1_IRQ: + return 126; + case PIC_I2C_2_IRQ: + return 127; + case PIC_I2C_3_IRQ: + return 128; + case PIC_9XX_XHCI_0_IRQ: + return 114; + case PIC_9XX_XHCI_1_IRQ: + return 115; + case PIC_9XX_XHCI_2_IRQ: + return 116; + case PIC_UART_0_IRQ: + return 133; + case PIC_UART_1_IRQ: + return 134; + case PIC_SATA_IRQ: + return 143; + case PIC_SPI_IRQ: + return 152; + case PIC_MMC_IRQ: + return 153; + case PIC_PCIE_LINK_LEGACY_IRQ(0): + case PIC_PCIE_LINK_LEGACY_IRQ(1): + case PIC_PCIE_LINK_LEGACY_IRQ(2): + case PIC_PCIE_LINK_LEGACY_IRQ(3): + return 191 + irq - PIC_PCIE_LINK_LEGACY_IRQ_BASE; + } + return -1; +} + +static int xlp_irq_to_irt(int irq) +{ + uint64_t pcibase; + int devoff, irt; + + devoff = 0; + switch (irq) { + case PIC_UART_0_IRQ: + devoff = XLP_IO_UART0_OFFSET(0); + break; + case PIC_UART_1_IRQ: + devoff = XLP_IO_UART1_OFFSET(0); + break; + case PIC_MMC_IRQ: + devoff = XLP_IO_MMC_OFFSET(0); + break; + case PIC_I2C_0_IRQ: /* I2C will be fixed up */ + case PIC_I2C_1_IRQ: + case PIC_I2C_2_IRQ: + case PIC_I2C_3_IRQ: + if (cpu_is_xlpii()) + devoff = XLP2XX_IO_I2C_OFFSET(0); + else + devoff = XLP_IO_I2C0_OFFSET(0); + break; + case PIC_SATA_IRQ: + devoff = XLP_IO_SATA_OFFSET(0); + break; + case PIC_GPIO_IRQ: + devoff = XLP_IO_GPIO_OFFSET(0); + break; + case PIC_NAND_IRQ: + devoff = XLP_IO_NAND_OFFSET(0); + break; + case PIC_SPI_IRQ: + devoff = XLP_IO_SPI_OFFSET(0); + break; + default: + if (cpu_is_xlpii()) { + switch (irq) { + /* XLP2XX has three XHCI USB controller */ + case PIC_2XX_XHCI_0_IRQ: + devoff = XLP2XX_IO_USB_XHCI0_OFFSET(0); + break; + case PIC_2XX_XHCI_1_IRQ: + devoff = XLP2XX_IO_USB_XHCI1_OFFSET(0); + break; + case PIC_2XX_XHCI_2_IRQ: + devoff = XLP2XX_IO_USB_XHCI2_OFFSET(0); + break; + } + } else { + switch (irq) { + case PIC_EHCI_0_IRQ: + devoff = XLP_IO_USB_EHCI0_OFFSET(0); + break; + case PIC_EHCI_1_IRQ: + devoff = XLP_IO_USB_EHCI1_OFFSET(0); + break; + case PIC_OHCI_0_IRQ: + devoff = XLP_IO_USB_OHCI0_OFFSET(0); + break; + case PIC_OHCI_1_IRQ: + devoff = XLP_IO_USB_OHCI1_OFFSET(0); + break; + case PIC_OHCI_2_IRQ: + devoff = XLP_IO_USB_OHCI2_OFFSET(0); + break; + case PIC_OHCI_3_IRQ: + devoff = XLP_IO_USB_OHCI3_OFFSET(0); + break; + } + } + } + + if (devoff != 0) { + uint32_t val; + + pcibase = nlm_pcicfg_base(devoff); + val = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG); + if (val == 0xffffffff) { + irt = -1; + } else { + irt = val & 0xffff; + /* HW weirdness, I2C IRT entry has to be fixed up */ + switch (irq) { + case PIC_I2C_1_IRQ: + irt = irt + 1; break; + case PIC_I2C_2_IRQ: + irt = irt + 2; break; + case PIC_I2C_3_IRQ: + irt = irt + 3; break; + } + } + } else if (irq >= PIC_PCIE_LINK_LEGACY_IRQ(0) && + irq <= PIC_PCIE_LINK_LEGACY_IRQ(3)) { + /* HW bug, PCI IRT entries are bad on early silicon, fix */ + irt = PIC_IRT_PCIE_LINK_INDEX(irq - + PIC_PCIE_LINK_LEGACY_IRQ_BASE); + } else { + irt = -1; + } + return irt; +} + +int nlm_irq_to_irt(int irq) +{ + /* return -2 for irqs without 1-1 mapping */ + if (irq >= PIC_PCIE_LINK_MSI_IRQ(0) && irq <= PIC_PCIE_LINK_MSI_IRQ(3)) + return -2; + if (irq >= PIC_PCIE_MSIX_IRQ(0) && irq <= PIC_PCIE_MSIX_IRQ(3)) + return -2; + + if (cpu_is_xlp9xx()) + return xlp9xx_irq_to_irt(irq); + else + return xlp_irq_to_irt(irq); +} + +static unsigned int nlm_xlp2_get_core_frequency(int node, int core) +{ + unsigned int pll_post_div, ctrl_val0, ctrl_val1, denom; + uint64_t num, sysbase, clockbase; + + if (cpu_is_xlp9xx()) { + clockbase = nlm_get_clock_regbase(node); + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_CPU_PLL_CTRL0(core)); + ctrl_val1 = nlm_read_sys_reg(clockbase, + SYS_9XX_CPU_PLL_CTRL1(core)); + } else { + sysbase = nlm_get_node(node)->sysbase; + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_CPU_PLL_CTRL0(core)); + ctrl_val1 = nlm_read_sys_reg(sysbase, + SYS_CPU_PLL_CTRL1(core)); + } + + /* Find PLL post divider value */ + switch ((ctrl_val0 >> 24) & 0x7) { + case 1: + pll_post_div = 2; + break; + case 3: + pll_post_div = 4; + break; + case 7: + pll_post_div = 8; + break; + case 6: + pll_post_div = 16; + break; + case 0: + default: + pll_post_div = 1; + break; + } + + num = 1000000ULL * (400 * 3 + 100 * (ctrl_val1 & 0x3f)); + denom = 3 * pll_post_div; + do_div(num, denom); + + return (unsigned int)num; +} + +static unsigned int nlm_xlp_get_core_frequency(int node, int core) +{ + unsigned int pll_divf, pll_divr, dfs_div, ext_div; + unsigned int rstval, dfsval, denom; + uint64_t num, sysbase; + + sysbase = nlm_get_node(node)->sysbase; + rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG); + dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE); + pll_divf = ((rstval >> 10) & 0x7f) + 1; + pll_divr = ((rstval >> 8) & 0x3) + 1; + ext_div = ((rstval >> 30) & 0x3) + 1; + dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1; + + num = 800000000ULL * pll_divf; + denom = 3 * pll_divr * ext_div * dfs_div; + do_div(num, denom); + + return (unsigned int)num; +} + +unsigned int nlm_get_core_frequency(int node, int core) +{ + if (cpu_is_xlpii()) + return nlm_xlp2_get_core_frequency(node, core); + else + return nlm_xlp_get_core_frequency(node, core); +} + +/* + * Calculate PIC frequency from PLL registers. + * freq_out = (ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13) / + * ((2^ctrl0[7:5]) * Table(ctrl0[26:24])) + */ +static unsigned int nlm_xlp2_get_pic_frequency(int node) +{ + u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div, cpu_xlp9xx; + u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div; + u64 sysbase, pll_out_freq_num, ref_clk_select, clockbase, ref_clk; + + sysbase = nlm_get_node(node)->sysbase; + clockbase = nlm_get_clock_regbase(node); + cpu_xlp9xx = cpu_is_xlp9xx(); + + /* Find ref_clk_base */ + if (cpu_xlp9xx) + ref_clk_select = (nlm_read_sys_reg(sysbase, + SYS_9XX_POWER_ON_RESET_CFG) >> 18) & 0x3; + else + ref_clk_select = (nlm_read_sys_reg(sysbase, + SYS_POWER_ON_RESET_CFG) >> 18) & 0x3; + switch (ref_clk_select) { + case 0: + ref_clk = 200000000ULL; + ref_div = 3; + break; + case 1: + ref_clk = 100000000ULL; + ref_div = 1; + break; + case 2: + ref_clk = 125000000ULL; + ref_div = 1; + break; + case 3: + ref_clk = 400000000ULL; + ref_div = 3; + break; + } + + /* Find the clock source PLL device for PIC */ + if (cpu_xlp9xx) { + reg_select = nlm_read_sys_reg(clockbase, + SYS_9XX_CLK_DEV_SEL_REG) & 0x3; + switch (reg_select) { + case 0: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2); + break; + case 1: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(0)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(0)); + break; + case 2: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(1)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(1)); + break; + case 3: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(2)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(2)); + break; + } + } else { + reg_select = (nlm_read_sys_reg(sysbase, + SYS_CLK_DEV_SEL_REG) >> 22) & 0x3; + switch (reg_select) { + case 0: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2); + break; + case 1: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(0)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(0)); + break; + case 2: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(1)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(1)); + break; + case 3: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(2)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(2)); + break; + } + } + + vco_post_div = (ctrl_val0 >> 5) & 0x7; + pll_post_div = (ctrl_val0 >> 24) & 0x7; + mdiv = ctrl_val2 & 0xff; + fdiv = (ctrl_val2 >> 8) & 0x1fff; + + /* Find PLL post divider value */ + switch (pll_post_div) { + case 1: + pll_post_div = 2; + break; + case 3: + pll_post_div = 4; + break; + case 7: + pll_post_div = 8; + break; + case 6: + pll_post_div = 16; + break; + case 0: + default: + pll_post_div = 1; + break; + } + + fdiv = fdiv/(1 << 13); + pll_out_freq_num = ((ref_clk >> 1) * (6 + mdiv)) + fdiv; + pll_out_freq_den = (1 << vco_post_div) * pll_post_div * ref_div; + + if (pll_out_freq_den > 0) + do_div(pll_out_freq_num, pll_out_freq_den); + + /* PIC post divider, which happens after PLL */ + if (cpu_xlp9xx) + pic_div = nlm_read_sys_reg(clockbase, + SYS_9XX_CLK_DEV_DIV_REG) & 0x3; + else + pic_div = (nlm_read_sys_reg(sysbase, + SYS_CLK_DEV_DIV_REG) >> 22) & 0x3; + do_div(pll_out_freq_num, 1 << pic_div); + + return pll_out_freq_num; +} + +unsigned int nlm_get_pic_frequency(int node) +{ + if (cpu_is_xlpii()) + return nlm_xlp2_get_pic_frequency(node); + else + return 133333333; +} + +unsigned int nlm_get_cpu_frequency(void) +{ + return nlm_get_core_frequency(0, 0); +} + +/* + * Fills upto 8 pairs of entries containing the DRAM map of a node + * if node < 0, get dram map for all nodes + */ +int nlm_get_dram_map(int node, uint64_t *dram_map, int nentries) +{ + uint64_t bridgebase, base, lim; + uint32_t val; + unsigned int barreg, limreg, xlatreg; + int i, n, rv; + + /* Look only at mapping on Node 0, we don't handle crazy configs */ + bridgebase = nlm_get_bridge_regbase(0); + rv = 0; + for (i = 0; i < 8; i++) { + if (rv + 1 >= nentries) + break; + if (cpu_is_xlp9xx()) { + barreg = BRIDGE_9XX_DRAM_BAR(i); + limreg = BRIDGE_9XX_DRAM_LIMIT(i); + xlatreg = BRIDGE_9XX_DRAM_NODE_TRANSLN(i); + } else { + barreg = BRIDGE_DRAM_BAR(i); + limreg = BRIDGE_DRAM_LIMIT(i); + xlatreg = BRIDGE_DRAM_NODE_TRANSLN(i); + } + if (node >= 0) { + /* node specified, get node mapping of BAR */ + val = nlm_read_bridge_reg(bridgebase, xlatreg); + n = (val >> 1) & 0x3; + if (n != node) + continue; + } + val = nlm_read_bridge_reg(bridgebase, barreg); + val = (val >> 12) & 0xfffff; + base = (uint64_t) val << 20; + val = nlm_read_bridge_reg(bridgebase, limreg); + val = (val >> 12) & 0xfffff; + if (val == 0) /* BAR not used */ + continue; + lim = ((uint64_t)val + 1) << 20; + dram_map[rv] = base; + dram_map[rv + 1] = lim; + rv += 2; + } + return rv; +} diff --git a/kernel/arch/mips/netlogic/xlp/setup.c b/kernel/arch/mips/netlogic/xlp/setup.c new file mode 100644 index 000000000..f743fd9da --- /dev/null +++ b/kernel/arch/mips/netlogic/xlp/setup.c @@ -0,0 +1,179 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/of_fdt.h> + +#include <asm/idle.h> +#include <asm/reboot.h> +#include <asm/time.h> +#include <asm/bootinfo.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> + +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/sys.h> + +uint64_t nlm_io_base; +struct nlm_soc_info nlm_nodes[NLM_NR_NODES]; +cpumask_t nlm_cpumask = CPU_MASK_CPU0; +unsigned int nlm_threads_per_core; + +static void nlm_linux_exit(void) +{ + uint64_t sysbase = nlm_get_node(0)->sysbase; + + if (cpu_is_xlp9xx()) + nlm_write_sys_reg(sysbase, SYS_9XX_CHIP_RESET, 1); + else + nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1); + for ( ; ; ) + cpu_wait(); +} + +static void nlm_fixup_mem(void) +{ + const int pref_backup = 512; + int i; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (boot_mem_map.map[i].type != BOOT_MEM_RAM) + continue; + boot_mem_map.map[i].size -= pref_backup; + } +} + +static void __init xlp_init_mem_from_bars(void) +{ + uint64_t map[16]; + int i, n; + + n = nlm_get_dram_map(-1, map, ARRAY_SIZE(map)); /* -1 : all nodes */ + for (i = 0; i < n; i += 2) { + /* exclude 0x1000_0000-0x2000_0000, u-boot device */ + if (map[i] <= 0x10000000 && map[i+1] > 0x10000000) + map[i+1] = 0x10000000; + if (map[i] > 0x10000000 && map[i] < 0x20000000) + map[i] = 0x20000000; + + add_memory_region(map[i], map[i+1] - map[i], BOOT_MEM_RAM); + } +} + +void __init plat_mem_setup(void) +{ +#ifdef CONFIG_SMP + nlm_wakeup_secondary_cpus(); + + /* update TLB size after waking up threads */ + current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; + + register_smp_ops(&nlm_smp_ops); +#endif + _machine_restart = (void (*)(char *))nlm_linux_exit; + _machine_halt = nlm_linux_exit; + pm_power_off = nlm_linux_exit; + + /* memory and bootargs from DT */ + xlp_early_init_devtree(); + + if (boot_mem_map.nr_map == 0) { + pr_info("Using DRAM BARs for memory map.\n"); + xlp_init_mem_from_bars(); + } + /* Calculate and setup wired entries for mapped kernel */ + nlm_fixup_mem(); +} + +const char *get_system_type(void) +{ + switch (read_c0_prid() & PRID_IMP_MASK) { + case PRID_IMP_NETLOGIC_XLP9XX: + case PRID_IMP_NETLOGIC_XLP5XX: + case PRID_IMP_NETLOGIC_XLP2XX: + return "Broadcom XLPII Series"; + default: + return "Netlogic XLP Series"; + } +} + +void __init prom_free_prom_memory(void) +{ + /* Nothing yet */ +} + +void xlp_mmu_init(void) +{ + u32 conf4; + + if (cpu_is_xlpii()) { + /* XLPII series has extended pagesize in config 4 */ + conf4 = read_c0_config4() & ~0x1f00u; + write_c0_config4(conf4 | ((PAGE_SHIFT - 10) / 2 << 8)); + } else { + /* enable extended TLB and Large Fixed TLB */ + write_c0_config6(read_c0_config6() | 0x24); + + /* set page mask of extended Fixed TLB in config7 */ + write_c0_config7(PM_DEFAULT_MASK >> + (13 + (ffz(PM_DEFAULT_MASK >> 13) / 2))); + } +} + +void nlm_percpu_init(int hwcpuid) +{ +} + +void __init prom_init(void) +{ + void *reset_vec; + + nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE); + nlm_init_boot_cpu(); + xlp_mmu_init(); + nlm_node_init(0); + xlp_dt_init((void *)(long)fw_arg0); + + /* Update reset entry point with CPU init code */ + reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS); + memset(reset_vec, 0, RESET_VEC_SIZE); + memcpy(reset_vec, (void *)nlm_reset_entry, + (nlm_reset_entry_end - nlm_reset_entry)); + +#ifdef CONFIG_SMP + cpumask_setall(&nlm_cpumask); +#endif +} diff --git a/kernel/arch/mips/netlogic/xlp/usb-init-xlp2.c b/kernel/arch/mips/netlogic/xlp/usb-init-xlp2.c new file mode 100644 index 000000000..2524939a5 --- /dev/null +++ b/kernel/arch/mips/netlogic/xlp/usb-init-xlp2.c @@ -0,0 +1,288 @@ +/* + * Copyright (c) 2003-2013 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/platform_device.h> +#include <linux/irq.h> + +#include <asm/netlogic/common.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> + +#define XLPII_USB3_CTL_0 0xc0 +#define XLPII_VAUXRST BIT(0) +#define XLPII_VCCRST BIT(1) +#define XLPII_NUM2PORT 9 +#define XLPII_NUM3PORT 13 +#define XLPII_RTUNEREQ BIT(20) +#define XLPII_MS_CSYSREQ BIT(21) +#define XLPII_XS_CSYSREQ BIT(22) +#define XLPII_RETENABLEN BIT(23) +#define XLPII_TX2RX BIT(24) +#define XLPII_XHCIREV BIT(25) +#define XLPII_ECCDIS BIT(26) + +#define XLPII_USB3_INT_REG 0xc2 +#define XLPII_USB3_INT_MASK 0xc3 + +#define XLPII_USB_PHY_TEST 0xc6 +#define XLPII_PRESET BIT(0) +#define XLPII_ATERESET BIT(1) +#define XLPII_LOOPEN BIT(2) +#define XLPII_TESTPDHSP BIT(3) +#define XLPII_TESTPDSSP BIT(4) +#define XLPII_TESTBURNIN BIT(5) + +#define XLPII_USB_PHY_LOS_LV 0xc9 +#define XLPII_LOSLEV 0 +#define XLPII_LOSBIAS 5 +#define XLPII_SQRXTX 8 +#define XLPII_TXBOOST 11 +#define XLPII_RSLKSEL 16 +#define XLPII_FSEL 20 + +#define XLPII_USB_RFCLK_REG 0xcc +#define XLPII_VVLD 30 + +#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v) + +#define nlm_xlpii_get_usb_pcibase(node, inst) \ + nlm_pcicfg_base(cpu_is_xlp9xx() ? \ + XLP9XX_IO_USB_OFFSET(node, inst) : \ + XLP2XX_IO_USB_OFFSET(node, inst)) +#define nlm_xlpii_get_usb_regbase(node, inst) \ + (nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ) + +static void xlp2xx_usb_ack(struct irq_data *data) +{ + u64 port_addr; + + switch (data->irq) { + case PIC_2XX_XHCI_0_IRQ: + port_addr = nlm_xlpii_get_usb_regbase(0, 1); + break; + case PIC_2XX_XHCI_1_IRQ: + port_addr = nlm_xlpii_get_usb_regbase(0, 2); + break; + case PIC_2XX_XHCI_2_IRQ: + port_addr = nlm_xlpii_get_usb_regbase(0, 3); + break; + default: + pr_err("No matching USB irq!\n"); + return; + } + nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff); +} + +static void xlp9xx_usb_ack(struct irq_data *data) +{ + u64 port_addr; + int node, irq; + + /* Find the node and irq on the node */ + irq = data->irq % NLM_IRQS_PER_NODE; + node = data->irq / NLM_IRQS_PER_NODE; + + switch (irq) { + case PIC_9XX_XHCI_0_IRQ: + port_addr = nlm_xlpii_get_usb_regbase(node, 1); + break; + case PIC_9XX_XHCI_1_IRQ: + port_addr = nlm_xlpii_get_usb_regbase(node, 2); + break; + case PIC_9XX_XHCI_2_IRQ: + port_addr = nlm_xlpii_get_usb_regbase(node, 3); + break; + default: + pr_err("No matching USB irq %d node %d!\n", irq, node); + return; + } + nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff); +} + +static void nlm_xlpii_usb_hw_reset(int node, int port) +{ + u64 port_addr, xhci_base, pci_base; + void __iomem *corebase; + u32 val; + + port_addr = nlm_xlpii_get_usb_regbase(node, port); + + /* Set frequency */ + val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV); + val &= ~(0x3f << XLPII_FSEL); + val |= (0x27 << XLPII_FSEL); + nlm_write_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV, val); + + val = nlm_read_usb_reg(port_addr, XLPII_USB_RFCLK_REG); + val |= (1 << XLPII_VVLD); + nlm_write_usb_reg(port_addr, XLPII_USB_RFCLK_REG, val); + + /* PHY reset */ + val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_TEST); + val &= (XLPII_ATERESET | XLPII_LOOPEN | XLPII_TESTPDHSP + | XLPII_TESTPDSSP | XLPII_TESTBURNIN); + nlm_write_usb_reg(port_addr, XLPII_USB_PHY_TEST, val); + + /* Setup control register */ + val = XLPII_VAUXRST | XLPII_VCCRST | (1 << XLPII_NUM2PORT) + | (1 << XLPII_NUM3PORT) | XLPII_MS_CSYSREQ | XLPII_XS_CSYSREQ + | XLPII_RETENABLEN | XLPII_XHCIREV; + nlm_write_usb_reg(port_addr, XLPII_USB3_CTL_0, val); + + /* Enable interrupts */ + nlm_write_usb_reg(port_addr, XLPII_USB3_INT_MASK, 0x00000001); + + /* Clear all interrupts */ + nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff); + + udelay(2000); + + /* XHCI configuration at PCI mem */ + pci_base = nlm_xlpii_get_usb_pcibase(node, port); + xhci_base = nlm_read_usb_reg(pci_base, 0x4) & ~0xf; + corebase = ioremap(xhci_base, 0x10000); + if (!corebase) + return; + + writel(0x240002, corebase + 0xc2c0); + /* GCTL 0xc110 */ + val = readl(corebase + 0xc110); + val &= ~(0x3 << 12); + val |= (1 << 12); + writel(val, corebase + 0xc110); + udelay(100); + + /* PHYCFG 0xc200 */ + val = readl(corebase + 0xc200); + val &= ~(1 << 6); + writel(val, corebase + 0xc200); + udelay(100); + + /* PIPECTL 0xc2c0 */ + val = readl(corebase + 0xc2c0); + val &= ~(1 << 17); + writel(val, corebase + 0xc2c0); + + iounmap(corebase); +} + +static int __init nlm_platform_xlpii_usb_init(void) +{ + int node; + + if (!cpu_is_xlpii()) + return 0; + + if (!cpu_is_xlp9xx()) { + /* XLP 2XX single node */ + pr_info("Initializing 2XX USB Interface\n"); + nlm_xlpii_usb_hw_reset(0, 1); + nlm_xlpii_usb_hw_reset(0, 2); + nlm_xlpii_usb_hw_reset(0, 3); + nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlp2xx_usb_ack); + nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlp2xx_usb_ack); + nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlp2xx_usb_ack); + return 0; + } + + /* XLP 9XX, multi-node */ + pr_info("Initializing 9XX/5XX USB Interface\n"); + for (node = 0; node < NLM_NR_NODES; node++) { + if (!nlm_node_present(node)) + continue; + nlm_xlpii_usb_hw_reset(node, 1); + nlm_xlpii_usb_hw_reset(node, 2); + nlm_xlpii_usb_hw_reset(node, 3); + nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_0_IRQ, xlp9xx_usb_ack); + nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_1_IRQ, xlp9xx_usb_ack); + nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_2_IRQ, xlp9xx_usb_ack); + } + return 0; +} + +arch_initcall(nlm_platform_xlpii_usb_init); + +static u64 xlp_usb_dmamask = ~(u32)0; + +/* Fixup the IRQ for USB devices which is exist on XLP9XX SOC PCIE bus */ +static void nlm_xlp9xx_usb_fixup_final(struct pci_dev *dev) +{ + int node; + + node = xlp_socdev_to_node(dev); + dev->dev.dma_mask = &xlp_usb_dmamask; + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + switch (dev->devfn) { + case 0x21: + dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_0_IRQ); + break; + case 0x22: + dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_1_IRQ); + break; + case 0x23: + dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_2_IRQ); + break; + } +} + +/* Fixup the IRQ for USB devices which is exist on XLP2XX SOC PCIE bus */ +static void nlm_xlp2xx_usb_fixup_final(struct pci_dev *dev) +{ + dev->dev.dma_mask = &xlp_usb_dmamask; + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + switch (dev->devfn) { + case 0x21: + dev->irq = PIC_2XX_XHCI_0_IRQ; + break; + case 0x22: + dev->irq = PIC_2XX_XHCI_1_IRQ; + break; + case 0x23: + dev->irq = PIC_2XX_XHCI_2_IRQ; + break; + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_XHCI, + nlm_xlp9xx_usb_fixup_final); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI, + nlm_xlp2xx_usb_fixup_final); diff --git a/kernel/arch/mips/netlogic/xlp/usb-init.c b/kernel/arch/mips/netlogic/xlp/usb-init.c new file mode 100644 index 000000000..f8117985f --- /dev/null +++ b/kernel/arch/mips/netlogic/xlp/usb-init.c @@ -0,0 +1,149 @@ +/* + * Copyright (c) 2003-2012 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/platform_device.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> + +/* + * USB glue logic registers, used only during initialization + */ +#define USB_CTL_0 0x01 +#define USB_PHY_0 0x0A +#define USB_PHY_RESET 0x01 +#define USB_PHY_PORT_RESET_0 0x10 +#define USB_PHY_PORT_RESET_1 0x20 +#define USB_CONTROLLER_RESET 0x01 +#define USB_INT_STATUS 0x0E +#define USB_INT_EN 0x0F +#define USB_PHY_INTERRUPT_EN 0x01 +#define USB_OHCI_INTERRUPT_EN 0x02 +#define USB_OHCI_INTERRUPT1_EN 0x04 +#define USB_OHCI_INTERRUPT2_EN 0x08 +#define USB_CTRL_INTERRUPT_EN 0x10 + +#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_usb_pcibase(node, inst) \ + nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst)) +#define nlm_get_usb_regbase(node, inst) \ + (nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ) + +static void nlm_usb_intr_en(int node, int port) +{ + uint32_t val; + uint64_t port_addr; + + port_addr = nlm_get_usb_regbase(node, port); + val = nlm_read_usb_reg(port_addr, USB_INT_EN); + val = USB_CTRL_INTERRUPT_EN | USB_OHCI_INTERRUPT_EN | + USB_OHCI_INTERRUPT1_EN | USB_OHCI_INTERRUPT2_EN; + nlm_write_usb_reg(port_addr, USB_INT_EN, val); +} + +static void nlm_usb_hw_reset(int node, int port) +{ + uint64_t port_addr; + uint32_t val; + + /* reset USB phy */ + port_addr = nlm_get_usb_regbase(node, port); + val = nlm_read_usb_reg(port_addr, USB_PHY_0); + val &= ~(USB_PHY_RESET | USB_PHY_PORT_RESET_0 | USB_PHY_PORT_RESET_1); + nlm_write_usb_reg(port_addr, USB_PHY_0, val); + + mdelay(100); + val = nlm_read_usb_reg(port_addr, USB_CTL_0); + val &= ~(USB_CONTROLLER_RESET); + val |= 0x4; + nlm_write_usb_reg(port_addr, USB_CTL_0, val); +} + +static int __init nlm_platform_usb_init(void) +{ + if (cpu_is_xlpii()) + return 0; + + pr_info("Initializing USB Interface\n"); + nlm_usb_hw_reset(0, 0); + nlm_usb_hw_reset(0, 3); + + /* Enable PHY interrupts */ + nlm_usb_intr_en(0, 0); + nlm_usb_intr_en(0, 3); + + return 0; +} + +arch_initcall(nlm_platform_usb_init); + +static u64 xlp_usb_dmamask = ~(u32)0; + +/* Fixup the IRQ for USB devices which is exist on XLP SOC PCIE bus */ +static void nlm_usb_fixup_final(struct pci_dev *dev) +{ + dev->dev.dma_mask = &xlp_usb_dmamask; + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + switch (dev->devfn) { + case 0x10: + dev->irq = PIC_EHCI_0_IRQ; + break; + case 0x11: + dev->irq = PIC_OHCI_0_IRQ; + break; + case 0x12: + dev->irq = PIC_OHCI_1_IRQ; + break; + case 0x13: + dev->irq = PIC_EHCI_1_IRQ; + break; + case 0x14: + dev->irq = PIC_OHCI_2_IRQ; + break; + case 0x15: + dev->irq = PIC_OHCI_3_IRQ; + break; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI, + nlm_usb_fixup_final); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_OHCI, + nlm_usb_fixup_final); diff --git a/kernel/arch/mips/netlogic/xlp/wakeup.c b/kernel/arch/mips/netlogic/xlp/wakeup.c new file mode 100644 index 000000000..87d7846af --- /dev/null +++ b/kernel/arch/mips/netlogic/xlp/wakeup.c @@ -0,0 +1,212 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/threads.h> + +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/string.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> +#include <asm/netlogic/mips-extns.h> + +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/pic.h> +#include <asm/netlogic/xlp-hal/sys.h> + +static int xlp_wakeup_core(uint64_t sysbase, int node, int core) +{ + uint32_t coremask, value; + int count, resetreg; + + coremask = (1 << core); + + /* Enable CPU clock in case of 8xx/3xx */ + if (!cpu_is_xlpii()) { + value = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL); + value &= ~coremask; + nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value); + } + + /* On 9XX, mark coherent first */ + if (cpu_is_xlp9xx()) { + value = nlm_read_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE); + value &= ~coremask; + nlm_write_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE, value); + } + + /* Remove CPU Reset */ + resetreg = cpu_is_xlp9xx() ? SYS_9XX_CPU_RESET : SYS_CPU_RESET; + value = nlm_read_sys_reg(sysbase, resetreg); + value &= ~coremask; + nlm_write_sys_reg(sysbase, resetreg, value); + + /* We are done on 9XX */ + if (cpu_is_xlp9xx()) + return 1; + + /* Poll for CPU to mark itself coherent on other type of XLP */ + count = 100000; + do { + value = nlm_read_sys_reg(sysbase, SYS_CPU_NONCOHERENT_MODE); + } while ((value & coremask) != 0 && --count > 0); + + return count != 0; +} + +static int wait_for_cpus(int cpu, int bootcpu) +{ + volatile uint32_t *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY); + int i, count, notready; + + count = 0x800000; + do { + notready = nlm_threads_per_core; + for (i = 0; i < nlm_threads_per_core; i++) + if (cpu_ready[cpu + i] || (cpu + i) == bootcpu) + --notready; + } while (notready != 0 && --count > 0); + + return count != 0; +} + +static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask) +{ + struct nlm_soc_info *nodep; + uint64_t syspcibase, fusebase; + uint32_t syscoremask, mask, fusemask; + int core, n, cpu, ncores; + + for (n = 0; n < NLM_NR_NODES; n++) { + if (n != 0) { + /* check if node exists and is online */ + if (cpu_is_xlp9xx()) { + int b = xlp9xx_get_socbus(n); + pr_info("Node %d SoC PCI bus %d.\n", n, b); + if (b == 0) + break; + } else { + syspcibase = nlm_get_sys_pcibase(n); + if (nlm_read_reg(syspcibase, 0) == 0xffffffff) + break; + } + nlm_node_init(n); + } + + /* read cores in reset from SYS */ + nodep = nlm_get_node(n); + + if (cpu_is_xlp9xx()) { + fusebase = nlm_get_fuse_regbase(n); + fusemask = nlm_read_reg(fusebase, FUSE_9XX_DEVCFG6); + switch (read_c0_prid() & PRID_IMP_MASK) { + case PRID_IMP_NETLOGIC_XLP5XX: + mask = 0xff; + break; + case PRID_IMP_NETLOGIC_XLP9XX: + default: + mask = 0xfffff; + break; + } + } else { + fusemask = nlm_read_sys_reg(nodep->sysbase, + SYS_EFUSE_DEVICE_CFG_STATUS0); + switch (read_c0_prid() & PRID_IMP_MASK) { + case PRID_IMP_NETLOGIC_XLP3XX: + mask = 0xf; + break; + case PRID_IMP_NETLOGIC_XLP2XX: + mask = 0x3; + break; + case PRID_IMP_NETLOGIC_XLP8XX: + default: + mask = 0xff; + break; + } + } + + /* + * Fused out cores are set in the fusemask, and the remaining + * cores are renumbered to range 0 .. nactive-1 + */ + syscoremask = (1 << hweight32(~fusemask & mask)) - 1; + + pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask); + ncores = nlm_cores_per_node(); + for (core = 0; core < ncores; core++) { + /* we will be on node 0 core 0 */ + if (n == 0 && core == 0) + continue; + + /* see if the core exists */ + if ((syscoremask & (1 << core)) == 0) + continue; + + /* see if at least the first hw thread is enabled */ + cpu = (n * ncores + core) * NLM_THREADS_PER_CORE; + if (!cpumask_test_cpu(cpu, wakeup_mask)) + continue; + + /* wake up the core */ + if (!xlp_wakeup_core(nodep->sysbase, n, core)) + continue; + + /* core is up */ + nodep->coremask |= 1u << core; + + /* spin until the hw threads sets their ready */ + if (!wait_for_cpus(cpu, 0)) + pr_err("Node %d : timeout core %d\n", n, core); + } + } +} + +void xlp_wakeup_secondary_cpus() +{ + /* + * In case of u-boot, the secondaries are in reset + * first wakeup core 0 threads + */ + xlp_boot_core0_siblings(); + if (!wait_for_cpus(0, 0)) + pr_err("Node 0 : timeout core 0\n"); + + /* now get other cores out of reset */ + xlp_enable_secondary_cores(&nlm_cpumask); +} |