summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm64/boot
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/arch/arm64/boot
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/arch/arm64/boot')
-rw-r--r--kernel/arch/arm64/boot/Makefile12
-rw-r--r--kernel/arch/arm64/boot/dts/Makefile11
-rw-r--r--kernel/arch/arm64/boot/dts/altera/Makefile5
-rw-r--r--kernel/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi358
-rw-r--r--kernel/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts39
-rw-r--r--kernel/arch/arm64/boot/dts/amd/amd-overdrive.dts1
-rw-r--r--kernel/arch/arm64/boot/dts/apm/Makefile1
-rw-r--r--kernel/arch/arm64/boot/dts/apm/apm-merlin.dts72
-rw-r--r--kernel/arch/arm64/boot/dts/apm/apm-mustang.dts22
-rw-r--r--kernel/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi271
-rw-r--r--kernel/arch/arm64/boot/dts/apm/apm-storm.dtsi203
-rw-r--r--kernel/arch/arm64/boot/dts/arm/Makefile3
-rw-r--r--kernel/arch/arm64/boot/dts/arm/juno-base.dtsi213
-rw-r--r--kernel/arch/arm64/boot/dts/arm/juno-clocks.dtsi4
-rw-r--r--kernel/arch/arm64/boot/dts/arm/juno-motherboard.dtsi146
-rw-r--r--kernel/arch/arm64/boot/dts/arm/juno-r1.dts172
-rw-r--r--kernel/arch/arm64/boot/dts/arm/juno.dts177
-rw-r--r--kernel/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi2
-rw-r--r--kernel/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts191
l---------kernel/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi1
-rw-r--r--kernel/arch/arm64/boot/dts/broadcom/Makefile5
-rw-r--r--kernel/arch/arm64/boot/dts/broadcom/ns2-svk.dts59
-rw-r--r--kernel/arch/arm64/boot/dts/broadcom/ns2.dtsi118
-rw-r--r--kernel/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi9
-rw-r--r--kernel/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi103
-rw-r--r--kernel/arch/arm64/boot/dts/exynos/exynos7.dtsi7
-rw-r--r--kernel/arch/arm64/boot/dts/freescale/Makefile4
-rw-r--r--kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts204
-rw-r--r--kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts166
-rw-r--r--kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts (renamed from kernel/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts)25
-rw-r--r--kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi520
-rw-r--r--kernel/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi163
-rw-r--r--kernel/arch/arm64/boot/dts/hisilicon/Makefile5
-rw-r--r--kernel/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts34
-rw-r--r--kernel/arch/arm64/boot/dts/hisilicon/hi6220.dtsi212
-rw-r--r--kernel/arch/arm64/boot/dts/hisilicon/hip05-d02.dts36
-rw-r--r--kernel/arch/arm64/boot/dts/hisilicon/hip05.dtsi271
-rw-r--r--kernel/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi191
-rw-r--r--kernel/arch/arm64/boot/dts/marvell/Makefile6
-rw-r--r--kernel/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts66
-rw-r--r--kernel/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts66
-rw-r--r--kernel/arch/arm64/boot/dts/marvell/berlin4ct.dtsi284
-rw-r--r--kernel/arch/arm64/boot/dts/mediatek/Makefile1
-rw-r--r--kernel/arch/arm64/boot/dts/mediatek/mt6795-evb.dts41
-rw-r--r--kernel/arch/arm64/boot/dts/mediatek/mt6795.dtsi175
-rw-r--r--kernel/arch/arm64/boot/dts/mediatek/mt8173-evb.dts371
-rw-r--r--kernel/arch/arm64/boot/dts/mediatek/mt8173.dtsi392
-rw-r--r--kernel/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi40
-rw-r--r--kernel/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi13
-rw-r--r--kernel/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi84
-rw-r--r--kernel/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi1
-rw-r--r--kernel/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi502
-rw-r--r--kernel/arch/arm64/boot/dts/qcom/msm8916.dtsi299
-rw-r--r--kernel/arch/arm64/boot/dts/qcom/pm8916.dtsi99
-rw-r--r--kernel/arch/arm64/boot/dts/rockchip/Makefile5
-rw-r--r--kernel/arch/arm64/boot/dts/rockchip/rk3368-r88.dts354
-rw-r--r--kernel/arch/arm64/boot/dts/rockchip/rk3368.dtsi900
-rw-r--r--kernel/arch/arm64/boot/dts/skeleton.dtsi13
-rw-r--r--kernel/arch/arm64/boot/dts/sprd/sc9836.dtsi99
-rw-r--r--kernel/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts89
-rw-r--r--kernel/arch/arm64/boot/dts/xilinx/zynqmp.dtsi233
61 files changed, 7704 insertions, 465 deletions
diff --git a/kernel/arch/arm64/boot/Makefile b/kernel/arch/arm64/boot/Makefile
index 5a0e3ab85..abcbba2f0 100644
--- a/kernel/arch/arm64/boot/Makefile
+++ b/kernel/arch/arm64/boot/Makefile
@@ -19,9 +19,21 @@ targets := Image Image.gz
$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
+$(obj)/Image.bz2: $(obj)/Image FORCE
+ $(call if_changed,bzip2)
+
$(obj)/Image.gz: $(obj)/Image FORCE
$(call if_changed,gzip)
+$(obj)/Image.lz4: $(obj)/Image FORCE
+ $(call if_changed,lz4)
+
+$(obj)/Image.lzma: $(obj)/Image FORCE
+ $(call if_changed,lzma)
+
+$(obj)/Image.lzo: $(obj)/Image FORCE
+ $(call if_changed,lzo)
+
install: $(obj)/Image
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image System.map "$(INSTALL_PATH)"
diff --git a/kernel/arch/arm64/boot/dts/Makefile b/kernel/arch/arm64/boot/dts/Makefile
index ad26a752b..eb3c42d97 100644
--- a/kernel/arch/arm64/boot/dts/Makefile
+++ b/kernel/arch/arm64/boot/dts/Makefile
@@ -1,12 +1,23 @@
+dts-dirs += altera
dts-dirs += amd
dts-dirs += apm
dts-dirs += arm
+dts-dirs += broadcom
dts-dirs += cavium
dts-dirs += exynos
dts-dirs += freescale
+dts-dirs += hisilicon
+dts-dirs += marvell
dts-dirs += mediatek
dts-dirs += qcom
+dts-dirs += rockchip
dts-dirs += sprd
dts-dirs += xilinx
subdir-y := $(dts-dirs)
+
+dtstree := $(srctree)/$(src)
+
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(foreach d,$(dts-dirs), $(wildcard $(dtstree)/$(d)/*.dts)))
+
+always := $(dtb-y)
diff --git a/kernel/arch/arm64/boot/dts/altera/Makefile b/kernel/arch/arm64/boot/dts/altera/Makefile
new file mode 100644
index 000000000..d7a641698
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/altera/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/kernel/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/kernel/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
new file mode 100644
index 000000000..445aa678f
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -0,0 +1,358 @@
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "altr,socfpga-stratix10";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x1>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x2>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x3>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 120 8>,
+ <0 121 8>,
+ <0 122 8>,
+ <0 123 8>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ intc: intc@fffc1000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0xfffc1000 0x1000>,
+ <0x0 0xfffc2000 0x2000>,
+ <0x0 0xfffc4000 0x2000>,
+ <0x0 0xfffc6000 0x2000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&intc>;
+ ranges = <0 0 0 0xffffffff>;
+
+ clkmgr@ffd1000 {
+ compatible = "altr,clk-mgr";
+ reg = <0xffd10000 0x1000>;
+ };
+
+ gmac0: ethernet@ff800000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff800000 0x2000>;
+ interrupts = <0 90 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gmac1: ethernet@ff802000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff802000 0x2000>;
+ interrupts = <0 91 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gmac2: ethernet@ff804000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff804000 0x2000>;
+ interrupts = <0 92 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gpio0: gpio@ffc03200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc03200 0x100>;
+ status = "disabled";
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <24>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 110 4>;
+ };
+ };
+
+ gpio1: gpio@ffc03300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc03300 0x100>;
+ status = "disabled";
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <24>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 110 4>;
+ };
+ };
+
+ i2c0: i2c@ffc02800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02800 0x100>;
+ interrupts = <0 103 4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc02900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02900 0x100>;
+ interrupts = <0 104 4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc02a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02a00 0x100>;
+ interrupts = <0 105 4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc02b00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02b00 0x100>;
+ interrupts = <0 106 4>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@ffc02c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02c00 0x100>;
+ interrupts = <0 107 4>;
+ status = "disabled";
+ };
+
+ mmc: dwmmc0@ff808000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff808000 0x1000>;
+ interrupts = <0 96 4>;
+ fifo-depth = <0x400>;
+ status = "disabled";
+ };
+
+ ocram: sram@ffe00000 {
+ compatible = "mmio-sram";
+ reg = <0xffe00000 0x100000>;
+ };
+
+ rst: rstmgr@ffd11000 {
+ #reset-cells = <1>;
+ compatible = "altr,rst-mgr";
+ reg = <0xffd11000 0x1000>;
+ };
+
+ spi0: spi@ffda4000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda4000 0x1000>;
+ interrupts = <0 101 4>;
+ num-chipselect = <4>;
+ bus-num = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ffda5000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda5000 0x1000>;
+ interrupts = <0 102 4>;
+ num-chipselect = <4>;
+ bus-num = <0>;
+ status = "disabled";
+ };
+
+ sysmgr: sysmgr@ffd12000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd12000 0x1000>;
+ };
+
+ /* Local timer */
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xf01>,
+ <1 14 0xf01>,
+ <1 11 0xf01>,
+ <1 10 0xf01>;
+ };
+
+ timer0: timer0@ffc03000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 113 4>;
+ reg = <0xffc03000 0x100>;
+ };
+
+ timer1: timer1@ffc03100 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 114 4>;
+ reg = <0xffc03100 0x100>;
+ };
+
+ timer2: timer2@ffd00000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 115 4>;
+ reg = <0xffd00000 0x100>;
+ };
+
+ timer3: timer3@ffd00100 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 116 4>;
+ reg = <0xffd00100 0x100>;
+ };
+
+ uart0: serial0@ffc02000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02000 0x100>;
+ interrupts = <0 108 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial1@ffc02100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02100 0x100>;
+ interrupts = <0 109 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ usbphy0: usbphy@0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "okay";
+ };
+
+ usb0: usb@ffb00000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb00000 0x40000>;
+ interrupts = <0 93 4>;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@ffb40000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb40000 0x40000>;
+ interrupts = <0 94 4>;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@ffd00200 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00200 0x100>;
+ interrupts = <0 117 4>;
+ status = "disabled";
+ };
+
+ watchdog1: watchdog@ffd00300 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00300 0x100>;
+ interrupts = <0 118 4>;
+ status = "disabled";
+ };
+
+ watchdog2: watchdog@ffd00400 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00400 0x100>;
+ interrupts = <0 125 4>;
+ status = "disabled";
+ };
+
+ watchdog3: watchdog@ffd00500 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00500 0x100>;
+ interrupts = <0 126 4>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/kernel/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
new file mode 100644
index 000000000..41ea2dba2
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -0,0 +1,39 @@
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "socfpga_stratix10.dtsi"
+
+/ {
+ model = "SoCFPGA Stratix 10 SoCDK";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/kernel/arch/arm64/boot/dts/amd/amd-overdrive.dts b/kernel/arch/arm64/boot/dts/amd/amd-overdrive.dts
index 564a3f7df..128fa942f 100644
--- a/kernel/arch/arm64/boot/dts/amd/amd-overdrive.dts
+++ b/kernel/arch/arm64/boot/dts/amd/amd-overdrive.dts
@@ -14,7 +14,6 @@
chosen {
stdout-path = &serial0;
- linux,pci-probe-only;
};
};
diff --git a/kernel/arch/arm64/boot/dts/apm/Makefile b/kernel/arch/arm64/boot/dts/apm/Makefile
index a2afabbc1..c75f17a49 100644
--- a/kernel/arch/arm64/boot/dts/apm/Makefile
+++ b/kernel/arch/arm64/boot/dts/apm/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+dtb-$(CONFIG_ARCH_XGENE) += apm-merlin.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/kernel/arch/arm64/boot/dts/apm/apm-merlin.dts b/kernel/arch/arm64/boot/dts/apm/apm-merlin.dts
new file mode 100644
index 000000000..119a469bd
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/apm/apm-merlin.dts
@@ -0,0 +1,72 @@
+/*
+ * dts file for AppliedMicro (APM) Merlin Board
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-shadowcat.dtsi"
+
+/ {
+ model = "APM X-Gene Merlin board";
+ compatible = "apm,merlin", "apm,xgene-shadowcat";
+
+ chosen { };
+
+ memory {
+ device_type = "memory";
+ reg = < 0x1 0x00000000 0x0 0x80000000 >;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ button@1 {
+ label = "POWER";
+ linux,code = <116>;
+ linux,input-type = <0x1>;
+ interrupts = <0x0 0x28 0x1>;
+ };
+ };
+
+ poweroff_mbox: poweroff_mbox@10548000 {
+ compatible = "syscon";
+ reg = <0x0 0x10548000 0x0 0x30>;
+ };
+
+ poweroff: poweroff@10548010 {
+ compatible = "syscon-poweroff";
+ regmap = <&poweroff_mbox>;
+ offset = <0x10>;
+ mask = <0x1>;
+ };
+};
+
+&serial0 {
+ status = "ok";
+};
+
+&sata1 {
+ status = "ok";
+};
+
+&sata2 {
+ status = "ok";
+};
+
+&sata3 {
+ status = "ok";
+};
+
+&sgenet0 {
+ status = "ok";
+};
+
+&xgenet1 {
+ status = "ok";
+};
diff --git a/kernel/arch/arm64/boot/dts/apm/apm-mustang.dts b/kernel/arch/arm64/boot/dts/apm/apm-mustang.dts
index 83578e766..01cdeda93 100644
--- a/kernel/arch/arm64/boot/dts/apm/apm-mustang.dts
+++ b/kernel/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -23,6 +23,28 @@
device_type = "memory";
reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ button@1 {
+ label = "POWER";
+ linux,code = <116>;
+ linux,input-type = <0x1>;
+ interrupts = <0x0 0x2d 0x1>;
+ };
+ };
+
+ poweroff_mbox: poweroff_mbox@10548000 {
+ compatible = "syscon";
+ reg = <0x0 0x10548000 0x0 0x30>;
+ };
+
+ poweroff: poweroff@10548010 {
+ compatible = "syscon-poweroff";
+ regmap = <&poweroff_mbox>;
+ offset = <0x10>;
+ mask = <0x1>;
+ };
};
&pcie0clk {
diff --git a/kernel/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/kernel/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
new file mode 100644
index 000000000..c804f8f1f
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -0,0 +1,271 @@
+/*
+ * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+ compatible = "apm,xgene-shadowcat";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@000 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x000>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@001 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x001>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x201>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@300 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x300>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@301 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x301>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ };
+
+ gic: interrupt-controller@78090000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-controller;
+ interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
+ ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
+ reg = <0x0 0x78090000 0x0 0x10000>, /* GIC Dist */
+ <0x0 0x780A0000 0x0 0x20000>, /* GIC CPU */
+ <0x0 0x780C0000 0x0 0x10000>, /* GIC VCPU Control */
+ <0x0 0x780E0000 0x0 0x20000>; /* GIC VCPU */
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <1 12 0xff04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 0 0xff04>, /* Secure Phys IRQ */
+ <1 13 0xff04>, /* Non-secure Phys IRQ */
+ <1 14 0xff04>, /* Virt IRQ */
+ <1 15 0xff04>; /* Hyp IRQ */
+ clock-frequency = <50000000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk";
+ };
+
+ socpll: socpll@17000120 {
+ compatible = "apm,xgene-socpll-clock";
+ #clock-cells = <1>;
+ clocks = <&refclk 0>;
+ reg = <0x0 0x17000120 0x0 0x1000>;
+ clock-output-names = "socpll";
+ };
+
+ socplldiv2: socplldiv2 {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <1>;
+ clocks = <&socpll 0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ clock-output-names = "socplldiv2";
+ };
+
+ pcie0clk: pcie0clk@1f2bc000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2bc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie0clk";
+ };
+
+ xge0clk: xge0clk@1f61c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f61c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ enable-mask = <0x3>;
+ csr-mask = <0x3>;
+ clock-output-names = "xge0clk";
+ };
+
+ xge1clk: xge1clk@1f62c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f62c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ enable-mask = <0x3>;
+ csr-mask = <0x3>;
+ clock-output-names = "xge1clk";
+ };
+ };
+
+ scu: system-clk-controller@17000000 {
+ compatible = "apm,xgene-scu","syscon";
+ reg = <0x0 0x17000000 0x0 0x400>;
+ };
+
+ reboot: reboot@17000014 {
+ compatible = "syscon-reboot";
+ regmap = <&scu>;
+ offset = <0x14>;
+ mask = <0x1>;
+ };
+
+ serial0: serial@10600000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x10600000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4c 0x4>;
+ };
+
+ sata1: sata@1a000000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a000000 0x0 0x1000>,
+ <0x0 0x1f200000 0x0 0x1000>,
+ <0x0 0x1f20d000 0x0 0x1000>,
+ <0x0 0x1f20e000 0x0 0x1000>;
+ interrupts = <0x0 0x5a 0x4>;
+ dma-coherent;
+ };
+
+ sata2: sata@1a200000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a200000 0x0 0x1000>,
+ <0x0 0x1f210000 0x0 0x1000>,
+ <0x0 0x1f21d000 0x0 0x1000>,
+ <0x0 0x1f21e000 0x0 0x1000>;
+ interrupts = <0x0 0x5b 0x4>;
+ dma-coherent;
+ };
+
+ sata3: sata@1a400000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a400000 0x0 0x1000>,
+ <0x0 0x1f220000 0x0 0x1000>,
+ <0x0 0x1f22d000 0x0 0x1000>,
+ <0x0 0x1f22e000 0x0 0x1000>;
+ interrupts = <0x0 0x5c 0x4>;
+ dma-coherent;
+ };
+
+ sbgpio: sbgpio@17001000{
+ compatible = "apm,xgene-gpio-sb";
+ reg = <0x0 0x17001000 0x0 0x400>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <0x0 0x28 0x1>,
+ <0x0 0x29 0x1>,
+ <0x0 0x2a 0x1>,
+ <0x0 0x2b 0x1>,
+ <0x0 0x2c 0x1>,
+ <0x0 0x2d 0x1>,
+ <0x0 0x2e 0x1>,
+ <0x0 0x2f 0x1>;
+ };
+
+ sgenet0: ethernet@1f610000 {
+ compatible = "apm,xgene2-sgenet";
+ status = "disabled";
+ reg = <0x0 0x1f610000 0x0 0x10000>,
+ <0x0 0x1f600000 0x0 0Xd100>,
+ <0x0 0x20000000 0x0 0X20000>;
+ interrupts = <0 96 4>,
+ <0 97 4>;
+ dma-coherent;
+ clocks = <&xge0clk 0>;
+ local-mac-address = [00 01 73 00 00 01];
+ phy-connection-type = "sgmii";
+ };
+
+ xgenet1: ethernet@1f620000 {
+ compatible = "apm,xgene2-xgenet";
+ status = "disabled";
+ reg = <0x0 0x1f620000 0x0 0x10000>,
+ <0x0 0x1f600000 0x0 0Xd100>,
+ <0x0 0x20000000 0x0 0X220000>;
+ interrupts = <0 108 4>,
+ <0 109 4>;
+ port-id = <1>;
+ dma-coherent;
+ clocks = <&xge1clk 0>;
+ local-mac-address = [00 01 73 00 00 02];
+ phy-connection-type = "xgmii";
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/apm/apm-storm.dtsi b/kernel/arch/arm64/boot/dts/apm/apm-storm.dtsi
index c8d3e0e86..6c5ed1199 100644
--- a/kernel/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/kernel/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -97,6 +97,11 @@
clock-frequency = <50000000>;
};
+ pmu {
+ compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+ interrupts = <1 12 0xff04>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -207,6 +212,17 @@
clock-output-names = "xge0clk";
};
+ xge1clk: xge1clk@1f62c000 {
+ compatible = "apm,xgene-device-clock";
+ status = "disabled";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f62c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ csr-mask = <0x3>;
+ clock-output-names = "xge1clk";
+ };
+
sataphy1clk: sataphy1clk@1f21c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
@@ -374,6 +390,133 @@
};
};
+ msi: msi@79000000 {
+ compatible = "apm,xgene1-msi";
+ msi-controller;
+ reg = <0x00 0x79000000 0x0 0x900000>;
+ interrupts = < 0x0 0x10 0x4
+ 0x0 0x11 0x4
+ 0x0 0x12 0x4
+ 0x0 0x13 0x4
+ 0x0 0x14 0x4
+ 0x0 0x15 0x4
+ 0x0 0x16 0x4
+ 0x0 0x17 0x4
+ 0x0 0x18 0x4
+ 0x0 0x19 0x4
+ 0x0 0x1a 0x4
+ 0x0 0x1b 0x4
+ 0x0 0x1c 0x4
+ 0x0 0x1d 0x4
+ 0x0 0x1e 0x4
+ 0x0 0x1f 0x4>;
+ };
+
+ scu: system-clk-controller@17000000 {
+ compatible = "apm,xgene-scu","syscon";
+ reg = <0x0 0x17000000 0x0 0x400>;
+ };
+
+ reboot: reboot@17000014 {
+ compatible = "syscon-reboot";
+ regmap = <&scu>;
+ offset = <0x14>;
+ mask = <0x1>;
+ };
+
+ csw: csw@7e200000 {
+ compatible = "apm,xgene-csw", "syscon";
+ reg = <0x0 0x7e200000 0x0 0x1000>;
+ };
+
+ mcba: mcba@7e700000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e700000 0x0 0x1000>;
+ };
+
+ mcbb: mcbb@7e720000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e720000 0x0 0x1000>;
+ };
+
+ efuse: efuse@1054a000 {
+ compatible = "apm,xgene-efuse", "syscon";
+ reg = <0x0 0x1054a000 0x0 0x20>;
+ };
+
+ edac@78800000 {
+ compatible = "apm,xgene-edac";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ regmap-csw = <&csw>;
+ regmap-mcba = <&mcba>;
+ regmap-mcbb = <&mcbb>;
+ regmap-efuse = <&efuse>;
+ reg = <0x0 0x78800000 0x0 0x100>;
+ interrupts = <0x0 0x20 0x4>,
+ <0x0 0x21 0x4>,
+ <0x0 0x27 0x4>;
+
+ edacmc@7e800000 {
+ compatible = "apm,xgene-edac-mc";
+ reg = <0x0 0x7e800000 0x0 0x1000>;
+ memory-controller = <0>;
+ };
+
+ edacmc@7e840000 {
+ compatible = "apm,xgene-edac-mc";
+ reg = <0x0 0x7e840000 0x0 0x1000>;
+ memory-controller = <1>;
+ };
+
+ edacmc@7e880000 {
+ compatible = "apm,xgene-edac-mc";
+ reg = <0x0 0x7e880000 0x0 0x1000>;
+ memory-controller = <2>;
+ };
+
+ edacmc@7e8c0000 {
+ compatible = "apm,xgene-edac-mc";
+ reg = <0x0 0x7e8c0000 0x0 0x1000>;
+ memory-controller = <3>;
+ };
+
+ edacpmd@7c000000 {
+ compatible = "apm,xgene-edac-pmd";
+ reg = <0x0 0x7c000000 0x0 0x200000>;
+ pmd-controller = <0>;
+ };
+
+ edacpmd@7c200000 {
+ compatible = "apm,xgene-edac-pmd";
+ reg = <0x0 0x7c200000 0x0 0x200000>;
+ pmd-controller = <1>;
+ };
+
+ edacpmd@7c400000 {
+ compatible = "apm,xgene-edac-pmd";
+ reg = <0x0 0x7c400000 0x0 0x200000>;
+ pmd-controller = <2>;
+ };
+
+ edacpmd@7c600000 {
+ compatible = "apm,xgene-edac-pmd";
+ reg = <0x0 0x7c600000 0x0 0x200000>;
+ pmd-controller = <3>;
+ };
+
+ edacl3@7e600000 {
+ compatible = "apm,xgene-edac-l3";
+ reg = <0x0 0x7e600000 0x0 0x1000>;
+ };
+
+ edacsoc@7e930000 {
+ compatible = "apm,xgene-edac-soc-v1";
+ reg = <0x0 0x7e930000 0x0 0x1000>;
+ };
+ };
+
pcie0: pcie@1f2b0000 {
status = "disabled";
device_type = "pci";
@@ -385,7 +528,8 @@
0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
reg-names = "csr", "cfg";
ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
- 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+ 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000 /* mem */
+ 0x43000000 0xf0 0x00000000 0xf0 0x00000000 0x10 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
@@ -395,6 +539,7 @@
0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
dma-coherent;
clocks = <&pcie0clk 0>;
+ msi-parent = <&msi>;
};
pcie1: pcie@1f2c0000 {
@@ -407,8 +552,9 @@
reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */
0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */
reg-names = "csr", "cfg";
- ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */
- 0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */
+ ranges = <0x01000000 0x00 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0xd1 0x80000000 0x00 0x80000000 /* mem */
+ 0x43000000 0xd8 0x00000000 0xd8 0x00000000 0x08 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
@@ -418,6 +564,7 @@
0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
dma-coherent;
clocks = <&pcie1clk 0>;
+ msi-parent = <&msi>;
};
pcie2: pcie@1f2d0000 {
@@ -430,8 +577,9 @@
reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */
0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */
reg-names = "csr", "cfg";
- ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */
- 0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */
+ ranges = <0x01000000 0x00 0x00000000 0x90 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0x91 0x80000000 0x00 0x80000000 /* mem */
+ 0x43000000 0x94 0x00000000 0x94 0x00000000 0x04 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
@@ -441,6 +589,7 @@
0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
dma-coherent;
clocks = <&pcie2clk 0>;
+ msi-parent = <&msi>;
};
pcie3: pcie@1f500000 {
@@ -453,8 +602,9 @@
reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */
0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
reg-names = "csr", "cfg";
- ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */
- 0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */
+ ranges = <0x01000000 0x00 0x00000000 0xa0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0xa1 0x80000000 0x00 0x80000000 /* mem */
+ 0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
@@ -464,6 +614,7 @@
0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
dma-coherent;
clocks = <&pcie3clk 0>;
+ msi-parent = <&msi>;
};
pcie4: pcie@1f510000 {
@@ -476,8 +627,9 @@
reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */
0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */
reg-names = "csr", "cfg";
- ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */
- 0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */
+ ranges = <0x01000000 0x00 0x00000000 0xc0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0xc1 0x80000000 0x00 0x80000000 /* mem */
+ 0x43000000 0xc8 0x00000000 0xc8 0x00000000 0x08 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
@@ -487,6 +639,7 @@
0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
dma-coherent;
clocks = <&pcie4clk 0>;
+ msi-parent = <&msi>;
};
serial0: serial@1c020000 {
@@ -607,6 +760,19 @@
phy-names = "sata-phy";
};
+ sbgpio: sbgpio@17001000{
+ compatible = "apm,xgene-gpio-sb";
+ reg = <0x0 0x17001000 0x0 0x400>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <0x0 0x28 0x1>,
+ <0x0 0x29 0x1>,
+ <0x0 0x2a 0x1>,
+ <0x0 0x2b 0x1>,
+ <0x0 0x2c 0x1>,
+ <0x0 0x2d 0x1>;
+ };
+
rtc: rtc@10510000 {
compatible = "apm,xgene-rtc";
reg = <0x0 0x10510000 0x0 0x400>;
@@ -688,6 +854,23 @@
phy-connection-type = "xgmii";
};
+ xgenet1: ethernet@1f620000 {
+ compatible = "apm,xgene1-xgenet";
+ status = "disabled";
+ reg = <0x0 0x1f620000 0x0 0xd100>,
+ <0x0 0x1f600000 0x0 0Xc300>,
+ <0x0 0x18000000 0x0 0X8000>;
+ reg-names = "enet_csr", "ring_csr", "ring_cmd";
+ interrupts = <0x0 0x6C 0x4>,
+ <0x0 0x6D 0x4>;
+ port-id = <1>;
+ dma-coherent;
+ clocks = <&xge1clk 0>;
+ /* mac address will be overwritten by the bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ phy-connection-type = "xgmii";
+ };
+
rng: rng@10520000 {
compatible = "apm,xgene-rng";
reg = <0x0 0x10520000 0x0 0x100>;
@@ -700,7 +883,7 @@
device_type = "dma";
reg = <0x0 0x1f270000 0x0 0x10000>,
<0x0 0x1f200000 0x0 0x10000>,
- <0x0 0x1b008000 0x0 0x2000>,
+ <0x0 0x1b000000 0x0 0x400000>,
<0x0 0x1054a000 0x0 0x100>;
interrupts = <0x0 0x82 0x4>,
<0x0 0xb8 0x4>,
diff --git a/kernel/arch/arm64/boot/dts/arm/Makefile b/kernel/arch/arm64/boot/dts/arm/Makefile
index 301a0dada..bb3c07209 100644
--- a/kernel/arch/arm64/boot/dts/arm/Makefile
+++ b/kernel/arch/arm64/boot/dts/arm/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/kernel/arch/arm64/boot/dts/arm/juno-base.dtsi b/kernel/arch/arm64/boot/dts/arm/juno-base.dtsi
new file mode 100644
index 000000000..dd5158eb5
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -0,0 +1,213 @@
+ /*
+ * Devices shared by all Juno boards
+ */
+
+ memtimer: timer@2a810000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x2a810000 0x0 0x10000>;
+ clock-frequency = <50000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ frame@2a830000 {
+ frame-number = <1>;
+ interrupts = <0 60 4>;
+ reg = <0x0 0x2a830000 0x0 0x10000>;
+ };
+ };
+
+ mailbox: mhu@2b1f0000 {
+ compatible = "arm,mhu", "arm,primecell";
+ reg = <0x0 0x2b1f0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mhu_lpri_rx",
+ "mhu_hpri_rx";
+ #mbox-cells = <1>;
+ clocks = <&soc_refclk100mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gic: interrupt-controller@2c010000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ reg = <0x0 0x2c010000 0 0x1000>,
+ <0x0 0x2c02f000 0 0x2000>,
+ <0x0 0x2c04f000 0 0x2000>,
+ <0x0 0x2c06f000 0 0x2000>;
+ #address-cells = <2>;
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ ranges = <0 0 0 0x2c1c0000 0 0x40000>;
+ v2m_0: v2m@0 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0 0 0 0x1000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ sram: sram@2e000000 {
+ compatible = "arm,juno-sram-ns", "mmio-sram";
+ reg = <0x0 0x2e000000 0x0 0x8000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x2e000000 0x8000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x0 0x200>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x200 0x200>;
+ };
+ };
+
+ scpi {
+ compatible = "arm,scpi";
+ mboxes = <&mailbox 1>;
+ shmem = <&cpu_scp_hpri>;
+
+ clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>, <1>, <2>;
+ clock-output-names = "atlclk", "aplclk","gpuclk";
+ };
+ scpi_clk: scpi_clocks@3 {
+ compatible = "arm,scpi-variable-clocks";
+ #clock-cells = <1>;
+ clock-indices = <3>, <4>;
+ clock-output-names = "pxlclk0", "pxlclk1";
+ };
+ };
+
+ scpi_sensors0: sensors {
+ compatible = "arm,scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ /include/ "juno-clocks.dtsi"
+
+ dma@7ff00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0x7ff00000 0 0x1000>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_faxiclk>;
+ clock-names = "apb_pclk";
+ };
+
+ soc_uart0: uart@7ff80000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x7ff80000 0x0 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ i2c@7ffa0000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x7ffa0000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <500>;
+ clocks = <&soc_smc50mhz>;
+
+ dvi0: dvi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ };
+
+ dvi1: dvi-transmitter@71 {
+ compatible = "nxp,tda998x";
+ reg = <0x71>;
+ };
+ };
+
+ ohci@7ffb0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0x7ffb0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ ehci@7ffc0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0x7ffc0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ memory-controller@7ffd0000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0 0x7ffd0000 0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* last 16MB of the first memory area is reserved for secure world use by firmware */
+ reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+ <0x00000008 0x80000000 0x1 0x80000000>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 15>;
+ interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;
+
+ /include/ "juno-motherboard.dtsi"
+ };
diff --git a/kernel/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/kernel/arch/arm64/boot/dts/arm/juno-clocks.dtsi
index c9b89efe0..25352ed94 100644
--- a/kernel/arch/arm64/boot/dts/arm/juno-clocks.dtsi
+++ b/kernel/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -36,9 +36,9 @@
clock-output-names = "apb_pclk";
};
- soc_faxiclk: refclk533mhz {
+ soc_faxiclk: refclk400mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <533000000>;
+ clock-frequency = <400000000>;
clock-output-names = "faxi_clk";
};
diff --git a/kernel/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/kernel/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 351c95bda..413f1b9eb 100644
--- a/kernel/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/kernel/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -54,6 +54,70 @@
regulator-always-on;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <116>;
+ label = "POWER";
+ gpios = <&iofpga_gpio0 0 0x4>;
+ };
+ button@2 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <102>;
+ label = "HOME";
+ gpios = <&iofpga_gpio0 1 0x4>;
+ };
+ button@3 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <152>;
+ label = "RLOCK";
+ gpios = <&iofpga_gpio0 2 0x4>;
+ };
+ button@4 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <115>;
+ label = "VOL+";
+ gpios = <&iofpga_gpio0 3 0x4>;
+ };
+ button@5 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <114>;
+ label = "VOL-";
+ gpios = <&iofpga_gpio0 4 0x4>;
+ };
+ button@6 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <99>;
+ label = "NMI";
+ gpios = <&iofpga_gpio0 5 0x4>;
+ };
+ };
+
+ flash@0,00000000 {
+ /* 2 * 32MiB NOR Flash memory mounted on CS0 */
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ linux,part-probe = "afs";
+ reg = <0 0x00000000 0x04000000>;
+ bank-width = <4>;
+ /*
+ * Unfortunately, accessing the flash disturbs
+ * the CPU idle states (suspend) and CPU
+ * hotplug of the platform. For this reason,
+ * flash hardware access is disabled by default.
+ */
+ status = "disabled";
+ };
+
ethernet@2,00000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x00000000 0x10000>;
@@ -87,6 +151,76 @@
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+ };
+
+ apbregs@010000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x010000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "vexpress:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "vexpress:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "vexpress:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "vexpress:3";
+ linux,default-trigger = "cpu1";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "vexpress:4";
+ linux,default-trigger = "cpu2";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "vexpress:5";
+ linux,default-trigger = "cpu3";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "vexpress:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "vexpress:7";
+ default-state = "off";
+ };
};
mmci@050000 {
@@ -148,5 +282,17 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
};
+
+ iofpga_gpio0: gpio@1d0000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x1d0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
};
diff --git a/kernel/arch/arm64/boot/dts/arm/juno-r1.dts b/kernel/arch/arm64/boot/dts/arm/juno-r1.dts
new file mode 100644
index 000000000..93bc3d7d5
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -0,0 +1,172 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "ARM Juno development board (r1)";
+ compatible = "arm,juno-r1", "arm,juno", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&A57_0>;
+ };
+ core1 {
+ cpu = <&A57_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&A53_0>;
+ };
+ core1 {
+ cpu = <&A53_1>;
+ };
+ core2 {
+ cpu = <&A53_2>;
+ };
+ core3 {
+ cpu = <&A53_3>;
+ };
+ };
+ };
+
+ A57_0: cpu@0 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
+ };
+
+ A57_1: cpu@1 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
+ };
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ };
+
+ A53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x101>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ };
+
+ A53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x102>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ };
+
+ A53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x103>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ };
+
+ A57_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A53_L2: l2-cache1 {
+ compatible = "cache";
+ };
+ };
+
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A57_0>,
+ <&A57_1>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A53_0>,
+ <&A53_1>,
+ <&A53_2>,
+ <&A53_3>;
+ };
+
+ #include "juno-base.dtsi"
+
+ pcie-controller@40000000 {
+ compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
+ device_type = "pci";
+ reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */
+ bus-range = <0 255>;
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
+ <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
+ <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>,
+ <0 0 0 2 &gic 0 0 0 137 4>,
+ <0 0 0 3 &gic 0 0 0 138 4>,
+ <0 0 0 4 &gic 0 0 0 139 4>;
+ msi-parent = <&v2m_0>;
+ };
+};
+
+&memtimer {
+ status = "okay";
+};
diff --git a/kernel/arch/arm64/boot/dts/arm/juno.dts b/kernel/arch/arm64/boot/dts/arm/juno.dts
index 5e9110a33..53442b5ee 100644
--- a/kernel/arch/arm64/boot/dts/arm/juno.dts
+++ b/kernel/arch/arm64/boot/dts/arm/juno.dts
@@ -34,12 +34,39 @@
#address-cells = <2>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&A57_0>;
+ };
+ core1 {
+ cpu = <&A57_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&A53_0>;
+ };
+ core1 {
+ cpu = <&A53_1>;
+ };
+ core2 {
+ cpu = <&A53_2>;
+ };
+ core3 {
+ cpu = <&A53_3>;
+ };
+ };
+ };
+
A57_0: cpu@0 {
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
};
A57_1: cpu@1 {
@@ -48,6 +75,7 @@
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
};
A53_0: cpu@100 {
@@ -56,6 +84,7 @@
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_1: cpu@101 {
@@ -64,6 +93,7 @@
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_2: cpu@102 {
@@ -72,6 +102,7 @@
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_3: cpu@103 {
@@ -80,6 +111,7 @@
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A57_L2: l2-cache0 {
@@ -91,148 +123,25 @@
};
};
- memory@80000000 {
- device_type = "memory";
- /* last 16MB of the first memory area is reserved for secure world use by firmware */
- reg = <0x00000000 0x80000000 0x0 0x7f000000>,
- <0x00000008 0x80000000 0x1 0x80000000>;
- };
-
- gic: interrupt-controller@2c001000 {
- compatible = "arm,gic-400", "arm,cortex-a15-gic";
- reg = <0x0 0x2c010000 0 0x1000>,
- <0x0 0x2c02f000 0 0x2000>,
- <0x0 0x2c04f000 0 0x2000>,
- <0x0 0x2c06f000 0 0x2000>;
- #address-cells = <0>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A57_0>,
+ <&A57_1>;
};
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&A57_0>,
- <&A57_1>,
- <&A53_0>,
+ interrupt-affinity = <&A53_0>,
<&A53_1>,
<&A53_2>,
<&A53_3>;
};
- /include/ "juno-clocks.dtsi"
-
- dma@7ff00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0x7ff00000 0 0x1000>;
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_faxiclk>;
- clock-names = "apb_pclk";
- };
-
- soc_uart0: uart@7ff80000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0x7ff80000 0x0 0x1000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- i2c@7ffa0000 {
- compatible = "snps,designware-i2c";
- reg = <0x0 0x7ffa0000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <400000>;
- i2c-sda-hold-time-ns = <500>;
- clocks = <&soc_smc50mhz>;
-
- dvi0: dvi-transmitter@70 {
- compatible = "nxp,tda998x";
- reg = <0x70>;
- };
-
- dvi1: dvi-transmitter@71 {
- compatible = "nxp,tda998x";
- reg = <0x71>;
- };
- };
-
- ohci@7ffb0000 {
- compatible = "generic-ohci";
- reg = <0x0 0x7ffb0000 0x0 0x10000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- ehci@7ffc0000 {
- compatible = "generic-ehci";
- reg = <0x0 0x7ffc0000 0x0 0x10000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- memory-controller@7ffd0000 {
- compatible = "arm,pl354", "arm,primecell";
- reg = <0 0x7ffd0000 0 0x1000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- };
-
- smb {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 15>;
- interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
-
- /include/ "juno-motherboard.dtsi"
- };
+ #include "juno-base.dtsi"
};
diff --git a/kernel/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/kernel/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index c46cbb29f..88a7583ed 100644
--- a/kernel/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/kernel/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -74,6 +74,8 @@
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
aaci@040000 {
diff --git a/kernel/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/kernel/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
new file mode 100644
index 000000000..bb3c26d11
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -0,0 +1,191 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * LogicTile Express 20MG
+ * V2F-1XV7
+ *
+ * Cortex-A53 (2 cores) Soft Macrocell Model
+ *
+ * HBI-0247C
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "V2F-1XV7 Cortex-A53x2 SMM";
+ arm,hbi = <0x247>;
+ arm,vexpress,site = <0xf>;
+ compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen {
+ stdout-path = "serial0:38400n8";
+ };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ i2c0 = &v2m_i2c_dvi;
+ i2c1 = &v2m_i2c_pcie;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 0>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 1>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x2c001000 0 0x1000>,
+ <0 0x2c002000 0 0x2000>,
+ <0 0x2c004000 0 0x2000>,
+ <0 0x2c006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ smbclk: osc@4 {
+ /* SMC clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 4>;
+ freq-range = <40000000 40000000>;
+ #clock-cells = <0>;
+ clock-output-names = "smclk";
+ };
+
+ volt@0 {
+ /* VIO to expansion board above */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO_UP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ volt@1 {
+ /* 12V from power connector J6 */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 1>;
+ regulator-name = "12";
+ regulator-always-on;
+ };
+
+ temp@0 {
+ /* FPGA temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "FPGA";
+ };
+ };
+
+ smb {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+ /include/ "vexpress-v2m-rs1.dtsi"
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi b/kernel/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi
new file mode 120000
index 000000000..68fd0f8f1
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi \ No newline at end of file
diff --git a/kernel/arch/arm64/boot/dts/broadcom/Makefile b/kernel/arch/arm64/boot/dts/broadcom/Makefile
new file mode 100644
index 000000000..e21fe66f1
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/broadcom/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/kernel/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/kernel/arch/arm64/boot/dts/broadcom/ns2-svk.dts
new file mode 100644
index 000000000..244baf879
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -0,0 +1,59 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "ns2.dtsi"
+
+/ {
+ model = "Broadcom NS2 SVK";
+ compatible = "brcm,ns2-svk", "brcm,ns2";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x000000000 0x80000000 0x00000000 0x40000000>;
+ };
+
+ soc: soc {
+ uart3: serial@66130000 {
+ status = "ok";
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/broadcom/ns2.dtsi b/kernel/arch/arm64/boot/dts/broadcom/ns2.dtsi
new file mode 100644
index 000000000..3c92d9227
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -0,0 +1,118 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x84b00000 0x00000008;
+
+/ {
+ compatible = "brcm,ns2";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x84b00000>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x84b00000>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x84b00000>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x84b00000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_EDGE_RISING)>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+
+ gic: interrupt-controller@65210000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x65210000 0x1000>,
+ <0x65220000 0x1000>,
+ <0x65240000 0x2000>,
+ <0x65260000 0x1000>;
+ };
+
+ uart3: serial@66130000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x66130000 0x100>;
+ interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <23961600>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/kernel/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index d8c0bdc51..9cb7cf942 100644
--- a/kernel/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/kernel/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -376,10 +376,19 @@
gic0: interrupt-controller@8010,00000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
interrupt-controller;
reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
<0x8010 0x80000000 0x0 0x600000>; /* GICR */
interrupts = <1 9 0xf04>;
+
+ its: gic-its@8010,00020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x8010 0x20000 0x0 0x200000>;
+ };
};
uaa0: serial@87e0,24000000 {
diff --git a/kernel/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/kernel/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
index 2eef4a279..f77ddaf21 100644
--- a/kernel/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
+++ b/kernel/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -586,3 +586,106 @@
samsung,pin-drv = <2>;
};
};
+
+&pinctrl_bus1 {
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf2: gpf2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf3: gpf3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf4: gpf4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf5: gpf5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg1: gpg1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph1: gph1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv6: gpv6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spi5_bus: spi5-bus {
+ samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ ufs_refclk_out: ufs-refclk-out {
+ samsung,pins = "gpg2-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+
+ ufs_rst_n: ufs-rst-n {
+ samsung,pins = "gph1-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/exynos/exynos7.dtsi b/kernel/arch/arm64/boot/dts/exynos/exynos7.dtsi
index d7a37c3a6..f9c5a549c 100644
--- a/kernel/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/kernel/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -26,6 +26,7 @@
pinctrl5 = &pinctrl_ese;
pinctrl6 = &pinctrl_fsys0;
pinctrl7 = &pinctrl_fsys1;
+ pinctrl8 = &pinctrl_bus1;
};
cpus {
@@ -278,6 +279,12 @@
interrupts = <0 203 0>;
};
+ pinctrl_bus1: pinctrl@14870000 {
+ compatible = "samsung,exynos7-pinctrl";
+ reg = <0x14870000 0x1000>;
+ interrupts = <0 384 0>;
+ };
+
hsi2c_0: hsi2c@13640000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13640000 0x1000>;
diff --git a/kernel/arch/arm64/boot/dts/freescale/Makefile b/kernel/arch/arm64/boot/dts/freescale/Makefile
index 4f2de3e78..c4957a4aa 100644
--- a/kernel/arch/arm64/boot/dts/freescale/Makefile
+++ b/kernel/arch/arm64/boot/dts/freescale/Makefile
@@ -1,4 +1,6 @@
-dtb-$(CONFIG_ARCH_FSL_LS2085A) += fsl-ls2085a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
new file mode 100644
index 000000000..4cb996d6e
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -0,0 +1,204 @@
+/*
+ * Device Tree file for Freescale LS2080a QDS Board.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2080a.dtsi"
+
+/ {
+ model = "Freescale Layerscape 2080a QDS Board";
+ compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+ 0x2 0x0 0x5 0x30000000 0x00010000
+ 0x3 0x0 0x5 0x20000000 0x00010000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ cpld@3,0 {
+ reg = <0x3 0x0 0x10000>;
+ compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pca9547@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00>;
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <500>;
+ };
+
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7481@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+&dspi {
+ status = "okay";
+ dflash0: n25q128a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <0>;
+ };
+ dflash1: sst25wf040b {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <1>;
+ };
+ dflash2: en25s64 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <2>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fl008k {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
new file mode 100644
index 000000000..e127f0baa
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -0,0 +1,166 @@
+/*
+ * Device Tree file for Freescale LS2080a RDB Board.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2080a.dtsi"
+
+/ {
+ model = "Freescale Layerscape 2080a RDB Board";
+ compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+ 0x2 0x0 0x5 0x30000000 0x00010000
+ 0x3 0x0 0x5 0x20000000 0x00010000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ cpld@3,0 {
+ reg = <0x3 0x0 0x10000>;
+ compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+ };
+
+};
+
+&i2c0 {
+ status = "okay";
+ pca9547@75 {
+ compatible = "nxp,pca9547";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01>;
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7481@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+&dspi {
+ status = "okay";
+ dflash0: n25q512a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <0>;
+ };
+};
+
+&qspi {
+ status = "disabled";
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/kernel/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts b/kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
index 82e2a6fcc..505d03807 100644
--- a/kernel/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts
+++ b/kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -1,7 +1,7 @@
/*
- * Device Tree file for Freescale LS2085a software Simulator model
+ * Device Tree file for Freescale LS2080a software Simulator model
*
- * Copyright (C) 2014, Freescale Semiconductor
+ * Copyright (C) 2014-2015, Freescale Semiconductor
*
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
@@ -20,11 +20,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
@@ -51,11 +46,16 @@
/dts-v1/;
-/include/ "fsl-ls2085a.dtsi"
+/include/ "fsl-ls2080a.dtsi"
/ {
- model = "Freescale Layerscape 2085a software Simulator model";
- compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+ model = "Freescale Layerscape 2080a software Simulator model";
+ compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
ethernet@2210000 {
compatible = "smsc,lan91c111";
@@ -63,3 +63,8 @@
interrupts = <0 58 0x1>;
};
};
+
+&ifc {
+ status = "okay";
+};
+
diff --git a/kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
new file mode 100644
index 000000000..925552e7b
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -0,0 +1,520 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-2080A family SoC.
+ *
+ * Copyright (C) 2014-2015, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ compatible = "fsl,ls2080a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ /*
+ * We expect the enable-method for cpu's to be "psci", but this
+ * is dependent on the SoC FW, which will fill this in.
+ *
+ * Currently supported enable-method is psci v0.2
+ */
+
+ /* We have 4 clusters having 2 Cortex-A57 cores each */
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x0>;
+ clocks = <&clockgen 1 0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x1>;
+ clocks = <&clockgen 1 0>;
+ };
+
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x100>;
+ clocks = <&clockgen 1 1>;
+ };
+
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x101>;
+ clocks = <&clockgen 1 1>;
+ };
+
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x200>;
+ clocks = <&clockgen 1 2>;
+ };
+
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x201>;
+ clocks = <&clockgen 1 2>;
+ };
+
+ cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x300>;
+ clocks = <&clockgen 1 3>;
+ };
+
+ cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x301>;
+ clocks = <&clockgen 1 3>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>;
+ /* DRAM space - 1, size : 2 GB DRAM */
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+ };
+
+ gic: interrupt-controller@6000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
+ <0x0 0x0c0c0000 0 0x2000>, /* GICC */
+ <0x0 0x0c0d0000 0 0x1000>, /* GICH */
+ <0x0 0x0c0e0000 0 0x20000>; /* GICV */
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ interrupts = <1 9 0x4>;
+
+ its: gic-its@6020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x6020000 0 0x20000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+ <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+ <1 11 0x8>, /* Virtual PPI, active-low */
+ <1 10 0x8>; /* Hypervisor PPI, active-low */
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clockgen: clocking@1300000 {
+ compatible = "fsl,ls2080a-clockgen";
+ reg = <0 0x1300000 0 0xa0000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
+ };
+
+ serial0: serial@21c0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 0x4>; /* Level high type */
+ };
+
+ serial1: serial@21c0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0600 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 0x4>; /* Level high type */
+ };
+
+ fsl_mc: fsl-mc@80c000000 {
+ compatible = "fsl,qoriq-mc";
+ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
+ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+ };
+
+ smmu: iommu@5000000 {
+ compatible = "arm,mmu-500";
+ reg = <0 0x5000000 0 0x800000>;
+ #global-interrupts = <12>;
+ interrupts = <0 13 4>, /* global secure fault */
+ <0 14 4>, /* combined secure interrupt */
+ <0 15 4>, /* global non-secure fault */
+ <0 16 4>, /* combined non-secure interrupt */
+ /* performance counter interrupts 0-7 */
+ <0 211 4>, <0 212 4>,
+ <0 213 4>, <0 214 4>,
+ <0 215 4>, <0 216 4>,
+ <0 217 4>, <0 218 4>,
+ /* per context interrupt, 64 interrupts */
+ <0 146 4>, <0 147 4>,
+ <0 148 4>, <0 149 4>,
+ <0 150 4>, <0 151 4>,
+ <0 152 4>, <0 153 4>,
+ <0 154 4>, <0 155 4>,
+ <0 156 4>, <0 157 4>,
+ <0 158 4>, <0 159 4>,
+ <0 160 4>, <0 161 4>,
+ <0 162 4>, <0 163 4>,
+ <0 164 4>, <0 165 4>,
+ <0 166 4>, <0 167 4>,
+ <0 168 4>, <0 169 4>,
+ <0 170 4>, <0 171 4>,
+ <0 172 4>, <0 173 4>,
+ <0 174 4>, <0 175 4>,
+ <0 176 4>, <0 177 4>,
+ <0 178 4>, <0 179 4>,
+ <0 180 4>, <0 181 4>,
+ <0 182 4>, <0 183 4>,
+ <0 184 4>, <0 185 4>,
+ <0 186 4>, <0 187 4>,
+ <0 188 4>, <0 189 4>,
+ <0 190 4>, <0 191 4>,
+ <0 192 4>, <0 193 4>,
+ <0 194 4>, <0 195 4>,
+ <0 196 4>, <0 197 4>,
+ <0 198 4>, <0 199 4>,
+ <0 200 4>, <0 201 4>,
+ <0 202 4>, <0 203 4>,
+ <0 204 4>, <0 205 4>,
+ <0 206 4>, <0 207 4>,
+ <0 208 4>, <0 209 4>;
+ mmu-masters = <&fsl_mc 0x300 0>;
+ };
+
+ dspi: dspi@2100000 {
+ status = "disabled";
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <0 26 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <0>;
+ };
+
+ esdhc: esdhc@2140000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ clock-frequency = <0>; /* Updated by bootloader */
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ little-endian;
+ bus-width = <4>;
+ };
+
+ gpio0: gpio@2300000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@2310000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2320000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@2330000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c0: i2c@2000000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts = <0 34 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c1: i2c@2010000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2010000 0x0 0x10000>;
+ interrupts = <0 34 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c2: i2c@2020000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2020000 0x0 0x10000>;
+ interrupts = <0 35 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c3: i2c@2030000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2030000 0x0 0x10000>;
+ interrupts = <0 35 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ ifc: ifc@2240000 {
+ compatible = "fsl,ifc", "simple-bus";
+ reg = <0x0 0x2240000 0x0 0x20000>;
+ interrupts = <0 21 0x4>; /* Level high type */
+ little-endian;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0x5 0x80000000 0x08000000
+ 2 0 0x5 0x30000000 0x00010000
+ 3 0 0x5 0x20000000 0x00010000>;
+ };
+
+ qspi: quadspi@20c0000 {
+ status = "disabled";
+ compatible = "fsl,vf610-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 25 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "qspi_en", "qspi";
+ };
+
+ pcie@3400000 {
+ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x10 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 108 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
+ <0000 0 0 2 &gic 0 0 0 110 4>,
+ <0000 0 0 3 &gic 0 0 0 111 4>,
+ <0000 0 0 4 &gic 0 0 0 112 4>;
+ };
+
+ pcie@3500000 {
+ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x12 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 113 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
+ <0000 0 0 2 &gic 0 0 0 115 4>,
+ <0000 0 0 3 &gic 0 0 0 116 4>,
+ <0000 0 0 4 &gic 0 0 0 117 4>;
+ };
+
+ pcie@3600000 {
+ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x14 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 118 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <8>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
+ <0000 0 0 2 &gic 0 0 0 120 4>,
+ <0000 0 0 3 &gic 0 0 0 121 4>,
+ <0000 0 0 4 &gic 0 0 0 122 4>;
+ };
+
+ pcie@3700000 {
+ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
+ 0x16 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 123 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
+ <0000 0 0 2 &gic 0 0 0 125 4>,
+ <0000 0 0 3 &gic 0 0 0 126 4>,
+ <0000 0 0 4 &gic 0 0 0 127 4>;
+ };
+
+ sata0: sata@3200000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>;
+ interrupts = <0 133 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ };
+
+ sata1: sata@3210000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-ahci";
+ reg = <0x0 0x3210000 0x0 0x10000>;
+ interrupts = <0 136 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ };
+
+ usb0: usb3@3100000 {
+ status = "disabled";
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 0x4>; /* Level high type */
+ dr_mode = "host";
+ };
+
+ usb1: usb3@3110000 {
+ status = "disabled";
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 0x4>; /* Level high type */
+ dr_mode = "host";
+ };
+
+ ccn@4000000 {
+ compatible = "arm,ccn-504";
+ reg = <0x0 0x04000000 0x0 0x01000000>;
+ interrupts = <0 12 4>;
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi b/kernel/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi
deleted file mode 100644
index e281ceb33..000000000
--- a/kernel/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Device Tree Include file for Freescale Layerscape-2085A family SoC.
- *
- * Copyright (C) 2014, Freescale Semiconductor
- *
- * Bhupesh Sharma <bhupesh.sharma@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
- compatible = "fsl,ls2085a";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- /*
- * We expect the enable-method for cpu's to be "psci", but this
- * is dependent on the SoC FW, which will fill this in.
- *
- * Currently supported enable-method is psci v0.2
- */
-
- /* We have 4 clusters having 2 Cortex-A57 cores each */
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x0>;
- };
-
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x1>;
- };
-
- cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x100>;
- };
-
- cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x101>;
- };
-
- cpu@200 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x200>;
- };
-
- cpu@201 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x201>;
- };
-
- cpu@300 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x300>;
- };
-
- cpu@301 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x301>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x00000000 0x80000000 0 0x80000000>;
- /* DRAM space - 1, size : 2 GB DRAM */
- };
-
- gic: interrupt-controller@6000000 {
- compatible = "arm,gic-v3";
- reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
- <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <1 9 0x4>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
- <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
- <1 11 0x8>, /* Virtual PPI, active-low */
- <1 10 0x8>; /* Hypervisor PPI, active-low */
- };
-
- serial0: serial@21c0500 {
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0500 0x0 0x100>;
- clock-frequency = <0>; /* Updated by bootloader */
- interrupts = <0 32 0x1>; /* edge triggered */
- };
-
- serial1: serial@21c0600 {
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0600 0x0 0x100>;
- clock-frequency = <0>; /* Updated by bootloader */
- interrupts = <0 32 0x1>; /* edge triggered */
- };
-
- fsl_mc: fsl-mc@80c000000 {
- compatible = "fsl,qoriq-mc";
- reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
- <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
- };
-};
diff --git a/kernel/arch/arm64/boot/dts/hisilicon/Makefile b/kernel/arch/arm64/boot/dts/hisilicon/Makefile
new file mode 100644
index 000000000..cd158b80e
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/hisilicon/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/kernel/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/kernel/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
new file mode 100644
index 000000000..8d43a0fce
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -0,0 +1,34 @@
+/*
+ * dts file for Hisilicon HiKey Development Board
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+/*Reserved 1MB memory for MCU*/
+/memreserve/ 0x05e00000 0x00100000;
+
+#include "hi6220.dtsi"
+
+/ {
+ model = "HiKey Development Board";
+ compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+
+ aliases {
+ serial0 = &uart0; /* On board UART0 */
+ serial1 = &uart1; /* BT UART */
+ serial2 = &uart2; /* LS Expansion UART0 */
+ serial3 = &uart3; /* LS Expansion UART1 */
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/kernel/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
new file mode 100644
index 000000000..82d2488a0
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -0,0 +1,212 @@
+/*
+ * dts file for Hisilicon Hi6220 SoC
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi6220-clock.h>
+
+/ {
+ compatible = "hisilicon,hi6220";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@f6801000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xf6801000 0 0x1000>, /* GICD */
+ <0x0 0xf6802000 0 0x2000>, /* GICC */
+ <0x0 0xf6804000 0 0x2000>, /* GICH */
+ <0x0 0xf6806000 0 0x2000>; /* GICV */
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ao_ctrl: ao_ctrl@f7800000 {
+ compatible = "hisilicon,hi6220-aoctrl", "syscon";
+ reg = <0x0 0xf7800000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ sys_ctrl: sys_ctrl@f7030000 {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ media_ctrl: media_ctrl@f4410000 {
+ compatible = "hisilicon,hi6220-mediactrl", "syscon";
+ reg = <0x0 0xf4410000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pm_ctrl: pm_ctrl@f7032000 {
+ compatible = "hisilicon,hi6220-pmctrl", "syscon";
+ reg = <0x0 0xf7032000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: uart@f8015000 { /* console */
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf8015000 0x0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ao_ctrl HI6220_UART0_PCLK>,
+ <&ao_ctrl HI6220_UART0_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart1: uart@f7111000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7111000 0x0 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART1_PCLK>,
+ <&sys_ctrl HI6220_UART1_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: uart@f7112000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7112000 0x0 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART2_PCLK>,
+ <&sys_ctrl HI6220_UART2_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: uart@f7113000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7113000 0x0 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART3_PCLK>,
+ <&sys_ctrl HI6220_UART3_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart4: uart@f7114000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7114000 0x0 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART4_PCLK>,
+ <&sys_ctrl HI6220_UART4_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/kernel/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
new file mode 100644
index 000000000..ae34e2504
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -0,0 +1,36 @@
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include "hip05.dtsi"
+
+/ {
+ model = "Hisilicon Hip05 D02 Development Board";
+ compatible = "hisilicon,hip05-d02";
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x0 0x80000000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "ok";
+};
diff --git a/kernel/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/kernel/arch/arm64/boot/dts/hisilicon/hip05.dtsi
new file mode 100644
index 000000000..4ff16d016
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -0,0 +1,271 @@
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hip05-d02";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&cpu8>;
+ };
+ core1 {
+ cpu = <&cpu9>;
+ };
+ core2 {
+ cpu = <&cpu10>;
+ };
+ core3 {
+ cpu = <&cpu11>;
+ };
+ };
+ cluster3 {
+ core0 {
+ cpu = <&cpu12>;
+ };
+ core1 {
+ cpu = <&cpu13>;
+ };
+ core2 {
+ cpu = <&cpu14>;
+ };
+ core3 {
+ cpu = <&cpu15>;
+ };
+ };
+ };
+
+ cpu0: cpu@20000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20000>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@20001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20001>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@20002 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20002>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@20003 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20003>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@20100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@20101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@20102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@20103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20103>;
+ enable-method = "psci";
+ };
+
+ cpu8: cpu@20200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20200>;
+ enable-method = "psci";
+ };
+
+ cpu9: cpu@20201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20201>;
+ enable-method = "psci";
+ };
+
+ cpu10: cpu@20202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20202>;
+ enable-method = "psci";
+ };
+
+ cpu11: cpu@20203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20203>;
+ enable-method = "psci";
+ };
+
+ cpu12: cpu@20300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20300>;
+ enable-method = "psci";
+ };
+
+ cpu13: cpu@20301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20301>;
+ enable-method = "psci";
+ };
+
+ cpu14: cpu@20302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20302>;
+ enable-method = "psci";
+ };
+
+ cpu15: cpu@20303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20303>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@8d000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x30000>;
+ reg = <0x0 0x8d000000 0 0x10000>, /* GICD */
+ <0x0 0x8d100000 0 0x300000>, /* GICR */
+ <0x0 0xfe000000 0 0x10000>, /* GICC */
+ <0x0 0xfe010000 0 0x10000>, /* GICH */
+ <0x0 0xfe020000 0 0x10000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ its_totems: interrupt-controller@8c000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x8c000000 0x0 0x40000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ refclk200mhz: refclk200mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ uart0: uart@80300000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x80300000 0x0 0x10000>;
+ interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&refclk200mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: uart@80310000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x80310000 0x0 0x10000>;
+ interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&refclk200mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/kernel/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
new file mode 100644
index 000000000..606dd5a05
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
@@ -0,0 +1,191 @@
+soc0: soc@000000000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 0x0 0x0 0x1 0x0>;
+ chip-id = <0>;
+
+ soc0_mdio0: mdio@803c0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "hisilicon,hns-mdio";
+ reg = <0x0 0x803c0000 0x0 0x10000
+ 0x0 0x80000000 0x0 0x10000>;
+
+ soc0_phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+ soc0_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+ };
+
+ dsa: dsa@c7000000 {
+ compatible = "hisilicon,hns-dsaf-v1";
+ dsa_name = "dsaf0";
+ mode = "6port-16rss";
+ interrupt-parent = <&mbigen_dsa>;
+
+ reg = <0x0 0xC0000000 0x0 0x420000
+ 0x0 0xC2000000 0x0 0x300000
+ 0x0 0xc5000000 0x0 0x890000
+ 0x0 0xc7000000 0x0 0x60000
+ >;
+
+ phy-handle = <0 0 0 0 &soc0_phy0 &soc0_phy1 0 0>;
+ interrupts = <
+ /* [14] ge fifo err 8 / xge 6**/
+ 149 0x4 150 0x4 151 0x4 152 0x4
+ 153 0x4 154 0x4 26 0x4 27 0x4
+ 155 0x4 156 0x4 157 0x4 158 0x4 159 0x4 160 0x4
+ /* [12] rcb com 4*3**/
+ 0x6 0x4 0x7 0x4 0x8 0x4 0x9 0x4
+ 16 0x4 17 0x4 18 0x4 19 0x4
+ 22 0x4 23 0x4 24 0x4 25 0x4
+ /* [8] ppe tnl 0-7***/
+ 0x0 0x4 0x1 0x4 0x2 0x4 0x3 0x4
+ 0x4 0x4 0x5 0x4 12 0x4 13 0x4
+ /* [21] dsaf event int 3+18**/
+ 128 0x4 129 0x4 130 0x4
+ 0x83 0x4 0x84 0x4 0x85 0x4 0x86 0x4 0x87 0x4 0x88 0x4
+ 0x89 0x4 0x8a 0x4 0x8b 0x4 0x8c 0x4 0x8d 0x4 0x8e 0x4
+ 0x8f 0x4 0x90 0x4 0x91 0x4 0x92 0x4 0x93 0x4 0x94 0x4
+ /* [4] debug rcb 2*2*/
+ 0xe 0x1 0xf 0x1 0x14 0x1 0x15 0x1
+ /* [256] sevice rcb 2*128*/
+ 0x180 0x1 0x181 0x1 0x182 0x1 0x183 0x1
+ 0x184 0x1 0x185 0x1 0x186 0x1 0x187 0x1
+ 0x188 0x1 0x189 0x1 0x18a 0x1 0x18b 0x1
+ 0x18c 0x1 0x18d 0x1 0x18e 0x1 0x18f 0x1
+ 0x190 0x1 0x191 0x1 0x192 0x1 0x193 0x1
+ 0x194 0x1 0x195 0x1 0x196 0x1 0x197 0x1
+ 0x198 0x1 0x199 0x1 0x19a 0x1 0x19b 0x1
+ 0x19c 0x1 0x19d 0x1 0x19e 0x1 0x19f 0x1
+ 0x1a0 0x1 0x1a1 0x1 0x1a2 0x1 0x1a3 0x1
+ 0x1a4 0x1 0x1a5 0x1 0x1a6 0x1 0x1a7 0x1
+ 0x1a8 0x1 0x1a9 0x1 0x1aa 0x1 0x1ab 0x1
+ 0x1ac 0x1 0x1ad 0x1 0x1ae 0x1 0x1af 0x1
+ 0x1b0 0x1 0x1b1 0x1 0x1b2 0x1 0x1b3 0x1
+ 0x1b4 0x1 0x1b5 0x1 0x1b6 0x1 0x1b7 0x1
+ 0x1b8 0x1 0x1b9 0x1 0x1ba 0x1 0x1bb 0x1
+ 0x1bc 0x1 0x1bd 0x1 0x1be 0x1 0x1bf 0x1
+ 0x1c0 0x1 0x1c1 0x1 0x1c2 0x1 0x1c3 0x1
+ 0x1c4 0x1 0x1c5 0x1 0x1c6 0x1 0x1c7 0x1
+ 0x1c8 0x1 0x1c9 0x1 0x1ca 0x1 0x1cb 0x1
+ 0x1cc 0x1 0x1cd 0x1 0x1ce 0x1 0x1cf 0x1
+ 0x1d0 0x1 0x1d1 0x1 0x1d2 0x1 0x1d3 0x1
+ 0x1d4 0x1 0x1d5 0x1 0x1d6 0x1 0x1d7 0x1
+ 0x1d8 0x1 0x1d9 0x1 0x1da 0x1 0x1db 0x1
+ 0x1dc 0x1 0x1dd 0x1 0x1de 0x1 0x1df 0x1
+ 0x1e0 0x1 0x1e1 0x1 0x1e2 0x1 0x1e3 0x1
+ 0x1e4 0x1 0x1e5 0x1 0x1e6 0x1 0x1e7 0x1
+ 0x1e8 0x1 0x1e9 0x1 0x1ea 0x1 0x1eb 0x1
+ 0x1ec 0x1 0x1ed 0x1 0x1ee 0x1 0x1ef 0x1
+ 0x1f0 0x1 0x1f1 0x1 0x1f2 0x1 0x1f3 0x1
+ 0x1f4 0x1 0x1f5 0x1 0x1f6 0x1 0x1f7 0x1
+ 0x1f8 0x1 0x1f9 0x1 0x1fa 0x1 0x1fb 0x1
+ 0x1fc 0x1 0x1fd 0x1 0x1fe 0x1 0x1ff 0x1
+ 0x200 0x1 0x201 0x1 0x202 0x1 0x203 0x1
+ 0x204 0x1 0x205 0x1 0x206 0x1 0x207 0x1
+ 0x208 0x1 0x209 0x1 0x20a 0x1 0x20b 0x1
+ 0x20c 0x1 0x20d 0x1 0x20e 0x1 0x20f 0x1
+ 0x210 0x1 0x211 0x1 0x212 0x1 0x213 0x1
+ 0x214 0x1 0x215 0x1 0x216 0x1 0x217 0x1
+ 0x218 0x1 0x219 0x1 0x21a 0x1 0x21b 0x1
+ 0x21c 0x1 0x21d 0x1 0x21e 0x1 0x21f 0x1
+ 0x220 0x1 0x221 0x1 0x222 0x1 0x223 0x1
+ 0x224 0x1 0x225 0x1 0x226 0x1 0x227 0x1
+ 0x228 0x1 0x229 0x1 0x22a 0x1 0x22b 0x1
+ 0x22c 0x1 0x22d 0x1 0x22e 0x1 0x22f 0x1
+ 0x230 0x1 0x231 0x1 0x232 0x1 0x233 0x1
+ 0x234 0x1 0x235 0x1 0x236 0x1 0x237 0x1
+ 0x238 0x1 0x239 0x1 0x23a 0x1 0x23b 0x1
+ 0x23c 0x1 0x23d 0x1 0x23e 0x1 0x23f 0x1
+ 0x240 0x1 0x241 0x1 0x242 0x1 0x243 0x1
+ 0x244 0x1 0x245 0x1 0x246 0x1 0x247 0x1
+ 0x248 0x1 0x249 0x1 0x24a 0x1 0x24b 0x1
+ 0x24c 0x1 0x24d 0x1 0x24e 0x1 0x24f 0x1
+ 0x250 0x1 0x251 0x1 0x252 0x1 0x253 0x1
+ 0x254 0x1 0x255 0x1 0x256 0x1 0x257 0x1
+ 0x258 0x1 0x259 0x1 0x25a 0x1 0x25b 0x1
+ 0x25c 0x1 0x25d 0x1 0x25e 0x1 0x25f 0x1
+ 0x260 0x1 0x261 0x1 0x262 0x1 0x263 0x1
+ 0x264 0x1 0x265 0x1 0x266 0x1 0x267 0x1
+ 0x268 0x1 0x269 0x1 0x26a 0x1 0x26b 0x1
+ 0x26c 0x1 0x26d 0x1 0x26e 0x1 0x26f 0x1
+ 0x270 0x1 0x271 0x1 0x272 0x1 0x273 0x1
+ 0x274 0x1 0x275 0x1 0x276 0x1 0x277 0x1
+ 0x278 0x1 0x279 0x1 0x27a 0x1 0x27b 0x1
+ 0x27c 0x1 0x27d 0x1 0x27e 0x1 0x27f 0x1>;
+ buf-size = <4096>;
+ desc-num = <1024>;
+ dma-coherent;
+ };
+
+ eth0: ethernet@0{
+ compatible = "hisilicon,hns-nic-v1";
+ ae-name = "dsaf0";
+ port-id = <0>;
+ local-mac-address = [00 00 00 01 00 58];
+ status = "disabled";
+ dma-coherent;
+ };
+ eth1: ethernet@1{
+ compatible = "hisilicon,hns-nic-v1";
+ ae-name = "dsaf0";
+ port-id = <1>;
+ status = "disabled";
+ dma-coherent;
+ };
+ eth2: ethernet@2{
+ compatible = "hisilicon,hns-nic-v1";
+ ae-name = "dsaf0";
+ port-id = <2>;
+ local-mac-address = [00 00 00 01 00 5a];
+ status = "disabled";
+ dma-coherent;
+ };
+ eth3: ethernet@3{
+ compatible = "hisilicon,hns-nic-v1";
+ ae-name = "dsaf0";
+ port-id = <3>;
+ local-mac-address = [00 00 00 01 00 5b];
+ status = "disabled";
+ dma-coherent;
+ };
+ eth4: ethernet@4{
+ compatible = "hisilicon,hns-nic-v1";
+ ae-name = "dsaf0";
+ port-id = <4>;
+ local-mac-address = [00 00 00 01 00 5c];
+ status = "disabled";
+ dma-coherent;
+ };
+ eth5: ethernet@5{
+ compatible = "hisilicon,hns-nic-v1";
+ ae-name = "dsaf0";
+ port-id = <5>;
+ local-mac-address = [00 00 00 01 00 5d];
+ status = "disabled";
+ dma-coherent;
+ };
+ eth6: ethernet@6{
+ compatible = "hisilicon,hns-nic-v1";
+ ae-name = "dsaf0";
+ port-id = <6>;
+ local-mac-address = [00 00 00 01 00 5e];
+ status = "disabled";
+ dma-coherent;
+ };
+ eth7: ethernet@7{
+ compatible = "hisilicon,hns-nic-v1";
+ ae-name = "dsaf0";
+ port-id = <7>;
+ local-mac-address = [00 00 00 01 00 5f];
+ status = "disabled";
+ dma-coherent;
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/marvell/Makefile b/kernel/arch/arm64/boot/dts/marvell/Makefile
new file mode 100644
index 000000000..348f4db4f
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/marvell/Makefile
@@ -0,0 +1,6 @@
+dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb
+dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/kernel/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts b/kernel/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts
new file mode 100644
index 000000000..0d70d39fa
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+ model = "Marvell BG4CT DMP board";
+ compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ /* the first 16MB is for firmwares' usage */
+ reg = <0 0x01000000 0 0x7f000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/kernel/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/kernel/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
new file mode 100644
index 000000000..348c37ecf
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+ model = "Marvell BG4CT STB board";
+ compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ /* the first 16MB is for firmwares' usage */
+ reg = <0 0x01000000 0 0x7f000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/kernel/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/kernel/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
new file mode 100644
index 000000000..a3b5f1d4a
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -0,0 +1,284 @@
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "marvell,berlin4ct", "marvell,berlin";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xf7000000 0x1000000>;
+
+ gic: interrupt-controller@901000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x901000 0x1000>,
+ <0x902000 0x2000>,
+ <0x904000 0x2000>,
+ <0x906000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ apb@e80000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0xe80000 0x10000>;
+ interrupt-parent = <&aic>;
+
+ gpio0: gpio@0400 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0>;
+ };
+ };
+
+ gpio1: gpio@0800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <1>;
+ };
+ };
+
+ gpio2: gpio@0c00 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-port@2 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <2>;
+ };
+ };
+
+ gpio3: gpio@1000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-port@3 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <3>;
+ };
+ };
+
+ aic: interrupt-controller@3800 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x3800 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ apb@fc0000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xfc0000 0x10000>;
+ interrupt-parent = <&sic>;
+
+ sic: interrupt-controller@1000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x1000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sm_gpio0: gpio@8000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x8000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-port@4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
+ sm_gpio1: gpio@9000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x9000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-port@5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
+ uart0: uart@d000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xd000 0x100>;
+ interrupts = <8>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/mediatek/Makefile b/kernel/arch/arm64/boot/dts/mediatek/Makefile
index 3ce24622b..e0a4bff2f 100644
--- a/kernel/arch/arm64/boot/dts/mediatek/Makefile
+++ b/kernel/arch/arm64/boot/dts/mediatek/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
always := $(dtb-y)
diff --git a/kernel/arch/arm64/boot/dts/mediatek/mt6795-evb.dts b/kernel/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
new file mode 100644
index 000000000..ad665f583
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6795.dtsi"
+
+/ {
+ model = "MediaTek MT6795 Evaluation Board";
+ compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x1e800000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/kernel/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/kernel/arch/arm64/boot/dts/mediatek/mt6795.dtsi
new file mode 100644
index 000000000..c85659d0f
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -0,0 +1,175 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt6795";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x001>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x002>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x003>;
+ };
+
+ cpu4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x100>;
+ };
+
+ cpu5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x101>;
+ };
+
+ cpu6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x102>;
+ };
+
+ cpu7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x103>;
+ };
+ };
+
+ system_clk: dummy13m {
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ #clock-cells = <0>;
+ };
+
+ rtc_clk: dummy32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ sysirq: intpol-controller@10200620 {
+ compatible = "mediatek,mt6795-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200620 0 0x20>;
+ };
+
+ gic: interrupt-controller@10221000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x10221000 0 0x1000>,
+ <0 0x10222000 0 0x2000>,
+ <0 0x10224000 0 0x2000>,
+ <0 0x10226000 0 0x2000>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/kernel/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index d0ab012fa..811cb760b 100644
--- a/kernel/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/kernel/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -34,6 +34,377 @@
chosen { };
};
+&i2c1 {
+ status = "okay";
+
+ buck: da9211@68 {
+ compatible = "dlg,da9211";
+ reg = <0x68>;
+
+ regulators {
+ da9211_vcpu_reg: BUCKA {
+ regulator-name = "VBUCKA";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-min-microamp = <2000000>;
+ regulator-max-microamp = <4400000>;
+ regulator-ramp-delay = <10000>;
+ regulator-always-on;
+ };
+
+ da9211_vgpu_reg: BUCKB {
+ regulator-name = "VBUCKB";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-min-microamp = <2000000>;
+ regulator-max-microamp = <3000000>;
+ regulator-ramp-delay = <10000>;
+ };
+ };
+ };
+};
+
+&mmc0 {
+ status = "okay";
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ vmmc-supply = <&mt6397_vemc_3v3_reg>;
+ vqmmc-supply = <&mt6397_vio18_reg>;
+ non-removable;
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_uhs>;
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ sd-uhs-sdr25;
+ cd-gpios = <&pio 132 0>;
+ vmmc-supply = <&mt6397_vmch_reg>;
+ vqmmc-supply = <&mt6397_vmc_reg>;
+};
+
+&pio {
+ mmc0_pins_default: mmc0default {
+ pins_cmd_dat {
+ pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+ <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+ <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+ <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+ <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+ <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+ <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+ <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+ <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins_clk {
+ pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ pins_rst {
+ pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1default {
+ pins_cmd_dat {
+ pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+ <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+ <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+ <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+ <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+ bias-pull-down;
+ drive-strength = <MTK_DRIVE_4mA>;
+ };
+
+ pins_insert {
+ pinmux = <MT8173_PIN_132_I2S0_DATA1__FUNC_GPIO132>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0 {
+ pins_cmd_dat {
+ pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+ <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+ <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+ <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+ <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+ <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+ <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+ <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+ <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_clk {
+ pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_rst {
+ pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1 {
+ pins_cmd_dat {
+ pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+ <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+ <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+ <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+ <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+};
+
+&pwrap {
+ pmic: mt6397 {
+ compatible = "mediatek,mt6397";
+ interrupt-parent = <&pio>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ mt6397regulator: mt6397regulator {
+ compatible = "mediatek,mt6397-regulator";
+
+ mt6397_vpca15_reg: buck_vpca15 {
+ regulator-compatible = "buck_vpca15";
+ regulator-name = "vpca15";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vpca7_reg: buck_vpca7 {
+ regulator-compatible = "buck_vpca7";
+ regulator-name = "vpca7";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vsramca15_reg: buck_vsramca15 {
+ regulator-compatible = "buck_vsramca15";
+ regulator-name = "vsramca15";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vsramca7_reg: buck_vsramca7 {
+ regulator-compatible = "buck_vsramca7";
+ regulator-name = "vsramca7";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vcore_reg: buck_vcore {
+ regulator-compatible = "buck_vcore";
+ regulator-name = "vcore";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vgpu_reg: buck_vgpu {
+ regulator-compatible = "buck_vgpu";
+ regulator-name = "vgpu";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vdrm_reg: buck_vdrm {
+ regulator-compatible = "buck_vdrm";
+ regulator-name = "vdrm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vio18_reg: buck_vio18 {
+ regulator-compatible = "buck_vio18";
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vtcxo_reg: ldo_vtcxo {
+ regulator-compatible = "ldo_vtcxo";
+ regulator-name = "vtcxo";
+ regulator-always-on;
+ };
+
+ mt6397_va28_reg: ldo_va28 {
+ regulator-compatible = "ldo_va28";
+ regulator-name = "va28";
+ regulator-always-on;
+ };
+
+ mt6397_vcama_reg: ldo_vcama {
+ regulator-compatible = "ldo_vcama";
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vio28_reg: ldo_vio28 {
+ regulator-compatible = "ldo_vio28";
+ regulator-name = "vio28";
+ regulator-always-on;
+ };
+
+ mt6397_vusb_reg: ldo_vusb {
+ regulator-compatible = "ldo_vusb";
+ regulator-name = "vusb";
+ };
+
+ mt6397_vmc_reg: ldo_vmc {
+ regulator-compatible = "ldo_vmc";
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vmch_reg: ldo_vmch {
+ regulator-compatible = "ldo_vmch";
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+ regulator-compatible = "ldo_vemc3v3";
+ regulator-name = "vemc_3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp1_reg: ldo_vgp1 {
+ regulator-compatible = "ldo_vgp1";
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1220000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6397_vgp2_reg: ldo_vgp2 {
+ regulator-compatible = "ldo_vgp2";
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp3_reg: ldo_vgp3 {
+ regulator-compatible = "ldo_vgp3";
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp4_reg: ldo_vgp4 {
+ regulator-compatible = "ldo_vgp4";
+ regulator-name = "vgp4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp5_reg: ldo_vgp5 {
+ regulator-compatible = "ldo_vgp5";
+ regulator-name = "vgp5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp6_reg: ldo_vgp6 {
+ regulator-compatible = "ldo_vgp6";
+ regulator-name = "vgp6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vibr_reg: ldo_vibr {
+ regulator-compatible = "ldo_vibr";
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+ };
+ };
+};
+
+&pio {
+ spi_pins_a: spi0 {
+ pins_spi {
+ pinmux = <MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_>,
+ <MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_>,
+ <MT8173_PIN_71_SPI_MO__FUNC_SPI_MO_0_>,
+ <MT8173_PIN_72_SPI_CS__FUNC_SPI_CS_0_>;
+ };
+ };
+};
+
+&spi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins_a>;
+ mediatek,pad-select = <0>;
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/kernel/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/kernel/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 924fdb667..4dd5f93d0 100644
--- a/kernel/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/kernel/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -11,8 +11,11 @@
* GNU General Public License for more details.
*/
+#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/mt8173-power.h>
+#include <dt-bindings/reset-controller/mt8173-resets.h>
#include "mt8173-pinfunc.h"
/ {
@@ -49,6 +52,8 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x000>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
cpu1: cpu@1 {
@@ -56,6 +61,7 @@
compatible = "arm,cortex-a53";
reg = <0x001>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
cpu2: cpu@100 {
@@ -63,6 +69,7 @@
compatible = "arm,cortex-a57";
reg = <0x100>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
cpu3: cpu@101 {
@@ -70,6 +77,20 @@
compatible = "arm,cortex-a57";
reg = <0x101>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ entry-latency-us = <639>;
+ exit-latency-us = <680>;
+ min-residency-us = <1088>;
+ arm,psci-suspend-param = <0x0010000>;
+ };
};
};
@@ -81,23 +102,38 @@
cpu_on = <0x84000003>;
};
- uart_clk: dummy26m {
+ clk26m: oscillator@0 {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ clk32k: oscillator@1 {
+ compatible = "fixed-clock";
#clock-cells = <0>;
+ clock-frequency = <32000>;
+ clock-output-names = "clk32k";
+ };
+
+ cpum_ck: oscillator@2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "cpum_ck";
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
soc {
@@ -106,6 +142,26 @@
compatible = "simple-bus";
ranges;
+ topckgen: clock-controller@10000000 {
+ compatible = "mediatek,mt8173-topckgen";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg: power-controller@10001000 {
+ compatible = "mediatek,mt8173-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pericfg: power-controller@10003000 {
+ compatible = "mediatek,mt8173-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
syscfg_pctl_a: syscfg_pctl_a@10005000 {
compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
reg = <0 0x10005000 0 0x1000>;
@@ -113,7 +169,7 @@
pio: pinctrl@0x10005000 {
compatible = "mediatek,mt8173-pinctrl";
- reg = <0 0x1000B000 0 0x1000>;
+ reg = <0 0x1000b000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>;
pins-are-numbered;
gpio-controller;
@@ -121,19 +177,102 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+
+ i2c0_pins_a: i2c0 {
+ pins1 {
+ pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>,
+ <MT8173_PIN_46_SCL0__FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c1 {
+ pins1 {
+ pinmux = <MT8173_PIN_125_SDA1__FUNC_SDA1>,
+ <MT8173_PIN_126_SCL1__FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins_a: i2c2 {
+ pins1 {
+ pinmux = <MT8173_PIN_43_SDA2__FUNC_SDA2>,
+ <MT8173_PIN_44_SCL2__FUNC_SCL2>;
+ bias-disable;
+ };
+ };
+
+ i2c3_pins_a: i2c3 {
+ pins1 {
+ pinmux = <MT8173_PIN_106_SDA3__FUNC_SDA3>,
+ <MT8173_PIN_107_SCL3__FUNC_SCL3>;
+ bias-disable;
+ };
+ };
+
+ i2c4_pins_a: i2c4 {
+ pins1 {
+ pinmux = <MT8173_PIN_133_SDA4__FUNC_SDA4>,
+ <MT8173_PIN_134_SCL4__FUNC_SCL4>;
+ bias-disable;
+ };
+ };
+
+ i2c6_pins_a: i2c6 {
+ pins1 {
+ pinmux = <MT8173_PIN_100_MSDC2_DAT0__FUNC_SDA5>,
+ <MT8173_PIN_101_MSDC2_DAT1__FUNC_SCL5>;
+ bias-disable;
+ };
+ };
+ };
+
+ scpsys: scpsys@10006000 {
+ compatible = "mediatek,mt8173-scpsys";
+ #power-domain-cells = <1>;
+ reg = <0 0x10006000 0 0x1000>;
+ clocks = <&clk26m>,
+ <&topckgen CLK_TOP_MM_SEL>,
+ <&topckgen CLK_TOP_VENC_SEL>,
+ <&topckgen CLK_TOP_VENC_LT_SEL>;
+ clock-names = "mfg", "mm", "venc", "venc_lt";
+ infracfg = <&infracfg>;
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt8173-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ };
+
+ pwrap: pwrap@1000d000 {
+ compatible = "mediatek,mt8173-pwrap";
+ reg = <0 0x1000d000 0 0x1000>;
+ reg-names = "pwrap";
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&infracfg MT8173_INFRA_PMIC_WRAP_RST>;
+ reset-names = "pwrap";
+ clocks = <&infracfg CLK_INFRA_PMICSPI>, <&infracfg CLK_INFRA_PMICWRAP>;
+ clock-names = "spi", "wrap";
};
sysirq: intpol-controller@10200620 {
compatible = "mediatek,mt8173-sysirq",
- "mediatek,mt6577-sysirq";
+ "mediatek,mt6577-sysirq";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10200620 0 0x20>;
};
+ apmixedsys: clock-controller@10209000 {
+ compatible = "mediatek,mt8173-apmixedsys";
+ reg = <0 0x10209000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic: interrupt-controller@10220000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -149,40 +288,257 @@
uart0: serial@11002000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+ clock-names = "baud", "bus";
status = "disabled";
};
uart1: serial@11003000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+ clock-names = "baud", "bus";
status = "disabled";
};
uart2: serial@11004000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+ clock-names = "baud", "bus";
status = "disabled";
};
uart3: serial@11005000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+ clock-names = "baud", "bus";
status = "disabled";
};
- };
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11007000 0 0x70>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11008000 0 0x70>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11009000 0 0x70>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi: spi@1100a000 {
+ compatible = "mediatek,mt8173-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&pericfg CLK_PERI_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ i2c3: i2c@11010000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11010000 0 0x70>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C3>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@11011000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11011000 0 0x70>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C4>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@11013000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11013000 0 0x70>,
+ <0 0x11000080 0 0x80>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C6>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ afe: audio-controller@11220000 {
+ compatible = "mediatek,mt8173-afe-pcm";
+ reg = <0 0x11220000 0 0x1000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>;
+ clocks = <&infracfg CLK_INFRA_AUDIO>,
+ <&topckgen CLK_TOP_AUDIO_SEL>,
+ <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+ <&topckgen CLK_TOP_APLL1_DIV0>,
+ <&topckgen CLK_TOP_APLL2_DIV0>,
+ <&topckgen CLK_TOP_I2S0_M_SEL>,
+ <&topckgen CLK_TOP_I2S1_M_SEL>,
+ <&topckgen CLK_TOP_I2S2_M_SEL>,
+ <&topckgen CLK_TOP_I2S3_M_SEL>,
+ <&topckgen CLK_TOP_I2S3_B_SEL>;
+ clock-names = "infra_sys_audio_clk",
+ "top_pdn_audio",
+ "top_pdn_aud_intbus",
+ "bck0",
+ "bck1",
+ "i2s0_m",
+ "i2s1_m",
+ "i2s2_m",
+ "i2s3_m",
+ "i2s3_b";
+ assigned-clocks = <&topckgen CLK_TOP_AUD_1_SEL>,
+ <&topckgen CLK_TOP_AUD_2_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_APLL1>,
+ <&topckgen CLK_TOP_APLL2>;
+ };
+
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8173-mmc",
+ "mediatek,mt8135-mmc";
+ reg = <0 0x11230000 0 0x1000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_0>,
+ <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt8173-mmc",
+ "mediatek,mt8135-mmc";
+ reg = <0 0x11240000 0 0x1000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_1>,
+ <&topckgen CLK_TOP_AXI_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
+ mmc2: mmc@11250000 {
+ compatible = "mediatek,mt8173-mmc",
+ "mediatek,mt8135-mmc";
+ reg = <0 0x11250000 0 0x1000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_2>,
+ <&topckgen CLK_TOP_AXI_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
+ mmc3: mmc@11260000 {
+ compatible = "mediatek,mt8173-mmc",
+ "mediatek,mt8135-mmc";
+ reg = <0 0x11260000 0 0x1000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_3>,
+ <&topckgen CLK_TOP_MSDC50_2_H_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
+ mmsys: clock-controller@14000000 {
+ compatible = "mediatek,mt8173-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: clock-controller@15000000 {
+ compatible = "mediatek,mt8173-imgsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: clock-controller@16000000 {
+ compatible = "mediatek,mt8173-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: clock-controller@18000000 {
+ compatible = "mediatek,mt8173-vencsys", "syscon";
+ reg = <0 0x18000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencltsys: clock-controller@19000000 {
+ compatible = "mediatek,mt8173-vencltsys", "syscon";
+ reg = <0 0x19000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
};
diff --git a/kernel/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/kernel/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
new file mode 100644
index 000000000..e03c11d9d
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -0,0 +1,40 @@
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+&pm8916_gpios {
+
+ usb_hub_reset_pm: usb_hub_reset_pm {
+ pinconf {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ };
+
+ usb_sw_sel_pm: usb_sw_sel_pm {
+ pinconf {
+ pins = "gpio4";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <PM8916_GPIO_VPH>;
+ input-disable;
+ };
+ };
+
+ pm8916_gpios_leds: pm8916_gpios_leds {
+ pinconf {
+ pins = "gpio1", "gpio2";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ };
+};
+
+&pm8916_mpps {
+
+ pm8916_mpps_leds: pm8916_mpps_leds {
+ pinconf {
+ pins = "mpp2", "mpp3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/kernel/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
new file mode 100644
index 000000000..cbeee0bcd
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
@@ -0,0 +1,13 @@
+
+#include <dt-bindings/gpio/gpio.h>
+
+&msmgpio {
+
+ msmgpio_leds: msmgpio_leds {
+ pinconf {
+ pins = "gpio21", "gpio120";
+ function = "gpio";
+ output-low;
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/kernel/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 703a4f16e..6b8abbe68 100644
--- a/kernel/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/kernel/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -12,10 +12,14 @@
*/
#include "msm8916.dtsi"
+#include "pm8916.dtsi"
+#include "apq8016-sbc-soc-pins.dtsi"
+#include "apq8016-sbc-pmic-pins.dtsi"
/ {
aliases {
serial0 = &blsp1_uart2;
+ serial1 = &blsp1_uart1;
};
chosen {
@@ -29,5 +33,85 @@
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
};
+
+ i2c@78b6000 {
+ /* On Low speed expansion */
+ status = "okay";
+ };
+
+ i2c@78b8000 {
+ /* On High speed expansion */
+ status = "okay";
+ };
+
+ i2c@78ba000 {
+ /* On Low speed expansion */
+ status = "okay";
+ };
+
+ spi@78b7000 {
+ /* On High speed expansion */
+ status = "okay";
+ };
+
+ spi@78b9000 {
+ /* On Low speed expansion */
+ status = "okay";
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msmgpio_leds>,
+ <&pm8916_gpios_leds>,
+ <&pm8916_mpps_leds>;
+
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "apq8016-sbc:green:user1";
+ gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "apq8016-sbc:green:user2";
+ gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "apq8016-sbc:green:user3";
+ gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "apq8016-sbc:green:user4";
+ gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+
+ led@5 {
+ label = "apq8016-sbc:yellow:wlan";
+ gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "wlan";
+ default-state = "off";
+ };
+
+ led@6 {
+ label = "apq8016-sbc:blue:bt";
+ gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bt";
+ default-state = "off";
+ };
+ };
};
};
+
+&sdhc_1 {
+ status = "okay";
+};
diff --git a/kernel/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/kernel/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
index bea871b0d..a1aa0b201 100644
--- a/kernel/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
+++ b/kernel/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
@@ -12,6 +12,7 @@
*/
#include "msm8916.dtsi"
+#include "pm8916.dtsi"
/ {
aliases {
diff --git a/kernel/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/kernel/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
new file mode 100644
index 000000000..49ec55a37
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -0,0 +1,502 @@
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&msmgpio {
+
+ blsp1_uart1_default: blsp1_uart1_default {
+ pinmux {
+ function = "blsp_uart1";
+ pins = "gpio0", "gpio1";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ blsp1_uart1_sleep: blsp1_uart1_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio0", "gpio1";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ blsp1_uart2_default: blsp1_uart2_default {
+ pinmux {
+ function = "blsp_uart2";
+ pins = "gpio4", "gpio5";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ blsp1_uart2_sleep: blsp1_uart2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio4", "gpio5";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi1_default: spi1_default {
+ pinmux {
+ function = "blsp_spi1";
+ pins = "gpio0", "gpio1", "gpio3";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio2";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1", "gpio3";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio2";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi1_sleep: spi1_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi2_default: spi2_default {
+ pinmux {
+ function = "blsp_spi2";
+ pins = "gpio4", "gpio5", "gpio7";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio6";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio6";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi2_sleep: spi2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi3_default: spi3_default {
+ pinmux {
+ function = "blsp_spi3";
+ pins = "gpio8", "gpio9", "gpio11";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio10";
+ };
+ pinconf {
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio10";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi3_sleep: spi3_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ };
+ pinconf {
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi4_default: spi4_default {
+ pinmux {
+ function = "blsp_spi4";
+ pins = "gpio12", "gpio13", "gpio15";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio14";
+ };
+ pinconf {
+ pins = "gpio12", "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio14";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi4_sleep: spi4_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio12", "gpio13", "gpio14", "gpio15";
+ };
+ pinconf {
+ pins = "gpio12", "gpio13", "gpio14", "gpio15";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi5_default: spi5_default {
+ pinmux {
+ function = "blsp_spi5";
+ pins = "gpio16", "gpio17", "gpio19";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio18";
+ };
+ pinconf {
+ pins = "gpio16", "gpio17", "gpio18", "gpio19";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio18";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi5_sleep: spi5_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio16", "gpio17", "gpio18", "gpio19";
+ };
+ pinconf {
+ pins = "gpio16", "gpio17", "gpio18", "gpio19";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi6_default: spi6_default {
+ pinmux {
+ function = "blsp_spi6";
+ pins = "gpio20", "gpio21", "gpio23";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio22";
+ };
+ pinconf {
+ pins = "gpio20", "gpio21", "gpio22", "gpio23";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio22";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi6_sleep: spi6_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio20", "gpio21", "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio20", "gpio21", "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ i2c2_default: i2c2_default {
+ pinmux {
+ function = "blsp_i2c2";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c2_sleep: i2c2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c4_default: i2c4_default {
+ pinmux {
+ function = "blsp_i2c4";
+ pins = "gpio14", "gpio15";
+ };
+ pinconf {
+ pins = "gpio14", "gpio15";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c4_sleep: i2c4_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio14", "gpio15";
+ };
+ pinconf {
+ pins = "gpio14", "gpio15";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c6_default: i2c6_default {
+ pinmux {
+ function = "blsp_i2c6";
+ pins = "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c6_sleep: i2c6_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ sdhc2_cd_pin {
+ sdc2_cd_on: cd_on {
+ pinmux {
+ function = "gpio";
+ pins = "gpio38";
+ };
+ pinconf {
+ pins = "gpio38";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ sdc2_cd_off: cd_off {
+ pinmux {
+ function = "gpio";
+ pins = "gpio38";
+ };
+ pinconf {
+ pins = "gpio38";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+ };
+
+ pmx_sdc1_clk {
+ sdc1_clk_on: clk_on {
+ pinmux {
+ pins = "sdc1_clk";
+ };
+ pinconf {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+ sdc1_clk_off: clk_off {
+ pinmux {
+ pins = "sdc1_clk";
+ };
+ pinconf {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc1_cmd {
+ sdc1_cmd_on: cmd_on {
+ pinmux {
+ pins = "sdc1_cmd";
+ };
+ pinconf {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+ sdc1_cmd_off: cmd_off {
+ pinmux {
+ pins = "sdc1_cmd";
+ };
+ pinconf {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc1_data {
+ sdc1_data_on: data_on {
+ pinmux {
+ pins = "sdc1_data";
+ };
+ pinconf {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+ sdc1_data_off: data_off {
+ pinmux {
+ pins = "sdc1_data";
+ };
+ pinconf {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc2_clk {
+ sdc2_clk_on: clk_on {
+ pinmux {
+ pins = "sdc2_clk";
+ };
+ pinconf {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+ sdc2_clk_off: clk_off {
+ pinmux {
+ pins = "sdc2_clk";
+ };
+ pinconf {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc2_cmd {
+ sdc2_cmd_on: cmd_on {
+ pinmux {
+ pins = "sdc2_cmd";
+ };
+ pinconf {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+ sdc2_cmd_off: cmd_off {
+ pinmux {
+ pins = "sdc2_cmd";
+ };
+ pinconf {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc2_data {
+ sdc2_data_on: data_on {
+ pinmux {
+ pins = "sdc2_data";
+ };
+ pinconf {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+ sdc2_data_off: data_off {
+ pinmux {
+ pins = "sdc2_data";
+ };
+ pinconf {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/qcom/msm8916.dtsi b/kernel/arch/arm64/boot/dts/qcom/msm8916.dtsi
index f212b8303..8d184ff19 100644
--- a/kernel/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/kernel/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -24,7 +24,10 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases { };
+ aliases {
+ sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+ sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+ };
chosen { };
@@ -77,7 +80,12 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
- pinctrl@1000000 {
+ restart@4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0x4ab000 0x4>;
+ };
+
+ msmgpio: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
@@ -85,39 +93,25 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
-
- blsp1_uart2_default: blsp1_uart2_default {
- pinmux {
- function = "blsp_uart2";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp1_uart2_sleep: blsp1_uart2_sleep {
- pinmux {
- function = "blsp_uart2";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
};
gcc: qcom,gcc@1800000 {
compatible = "qcom,gcc-msm8916";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0x1800000 0x80000>;
};
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_uart2: serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78b0000 0x200>;
@@ -127,6 +121,232 @@
status = "disabled";
};
+ blsp_dma: dma@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x23000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi1: spi@78b5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b5000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 5>, <&blsp_dma 4>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi1_default>;
+ pinctrl-1 = <&spi1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi2: spi@78b6000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b6000 0x600>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 7>, <&blsp_dma 6>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi2_default>;
+ pinctrl-1 = <&spi2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi3: spi@78b7000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b7000 0x600>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi3_default>;
+ pinctrl-1 = <&spi3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi4: spi@78b8000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b8000 0x600>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 11>, <&blsp_dma 10>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi4_default>;
+ pinctrl-1 = <&spi4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi5: spi@78b9000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b9000 0x600>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 13>, <&blsp_dma 12>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi5_default>;
+ pinctrl-1 = <&spi5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi6: spi@78ba000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078ba000 0x600>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 15>, <&blsp_dma 14>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi6_default>;
+ pinctrl-1 = <&spi6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c2: i2c@78b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b6000 0x1000>;
+ interrupts = <GIC_SPI 96 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_default>;
+ pinctrl-1 = <&i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c4: i2c@78b8000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b8000 0x1000>;
+ interrupts = <GIC_SPI 98 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c4_default>;
+ pinctrl-1 = <&i2c4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c6: i2c@78ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78ba000 0x1000>;
+ interrupts = <GIC_SPI 100 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c6_default>;
+ pinctrl-1 = <&i2c6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ sdhc_1: sdhci@07824000 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <0 123 0>, <0 138 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
+ sdhc_2: sdhci@07864000 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <0 125 0>, <0 221 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core", "iface";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usb_dev: usb@78d9000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x78d9000 0x400>;
+ dr_mode = "peripheral";
+ interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+ usb-phy = <&usb_otg>;
+ status = "disabled";
+ };
+
+ usb_host: ehci@78d9000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x78d9000 0x400>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+ usb-phy = <&usb_otg>;
+ status = "disabled";
+ };
+
+ usb_otg: phy@78d9000 {
+ compatible = "qcom,usb-otg-snps";
+ reg = <0x78d9000 0x400>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
+ <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,vdd-levels = <1 5 7>;
+ qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
+ dr_mode = "peripheral";
+ qcom,otg-control = <2>; // PMIC
+
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>,
+ <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "iface", "core", "sleep";
+
+ resets = <&gcc GCC_USB2A_PHY_BCR>,
+ <&gcc GCC_USB_HS_BCR>;
+ reset-names = "phy", "link";
+ status = "disabled";
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
@@ -192,5 +412,32 @@
status = "disabled";
};
};
+
+ spmi_bus: spmi@200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x200f000 0x001000>,
+ <0x2400000 0x400000>,
+ <0x2c00000 0x400000>,
+ <0x3800000 0x200000>,
+ <0x200a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ rng@22000 {
+ compatible = "qcom,prng";
+ reg = <0x00022000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
};
};
+
+#include "msm8916-pins.dtsi"
diff --git a/kernel/arch/arm64/boot/dts/qcom/pm8916.dtsi b/kernel/arch/arm64/boot/dts/qcom/pm8916.dtsi
new file mode 100644
index 000000000..b222ece7e
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -0,0 +1,99 @@
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+ usid0: pm8916@0 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000 0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pwrkey@800 {
+ compatible = "qcom,pm8941-pwrkey";
+ reg = <0x800>;
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ };
+
+ pm8916_gpios: gpios@c000 {
+ compatible = "qcom,pm8916-gpio";
+ reg = <0xc000 0x400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8916_mpps: mpps@a000 {
+ compatible = "qcom,pm8916-mpp";
+ reg = <0xa000 0x400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8916_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8916_vadc: vadc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100 0x100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ usb_in {
+ reg = <VADC_USBIN>;
+ qcom,pre-scaling = <1 10>;
+ };
+ vph_pwr {
+ reg = <VADC_VSYS>;
+ qcom,pre-scaling = <1 3>;
+ };
+ die_temp {
+ reg = <VADC_DIE_TEMP>;
+ };
+ ref_625mv {
+ reg = <VADC_REF_625MV>;
+ };
+ ref_1250v {
+ reg = <VADC_REF_1250MV>;
+ };
+ ref_gnd {
+ reg = <VADC_GND_REF>;
+ };
+ ref_vdd {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
+ };
+
+ usid1: pm8916@1 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/rockchip/Makefile b/kernel/arch/arm64/boot/dts/rockchip/Makefile
new file mode 100644
index 000000000..601e6a236
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/rockchip/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/kernel/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
new file mode 100644
index 000000000..401a81231
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -0,0 +1,354 @@
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+
+/ {
+ model = "Rockchip R88";
+ compatible = "rockchip,r88", "rockchip,rk3368";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key>;
+
+ button@0 {
+ gpio-key,wakeup = <1>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <116>;
+ };
+ };
+
+ leds: gpio-leds {
+ compatible = "gpio-leds";
+
+ work {
+ gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ label = "r88:green:led";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_ctl>;
+ };
+ };
+
+ ir: ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_int>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&hym8563>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_rst>, <&wifi_reg_on>;
+
+ reset-gpios =
+ /* BT_RST_N */
+ <&gpio3 5 GPIO_ACTIVE_LOW>,
+
+ /* WL_REG_ON */
+ <&gpio3 4 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc_18: vcc18-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ /* supplies both host and otg */
+ vcc_host: vcc-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc_host";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_io: vcc-io-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_lan: vcc-lan-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_lan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vccio_wl: vccio-wl-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_wl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
+ };
+
+ vdd_10: vdd-10-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&emmc {
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ mmc-pwrseq = <&emmc_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ status = "okay";
+};
+
+&gmac {
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rmii";
+ clock_in_out = "output";
+ snps,reset-gpio = <&gpio3 12 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: syr827@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-enable-ramp-delay = <300>;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <8000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ hym8563: hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ /* rtc_int is not connected */
+ };
+};
+
+&sdio0 {
+ assigned-clocks = <&cru SCLK_SDIO0>;
+ assigned-clock-parents = <&cru PLL_CPLL>;
+ broken-cd;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vccio_wl>;
+ status = "okay";
+};
+
+&pinctrl {
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ emmc {
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ };
+
+ emmc-clk {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+ };
+
+ emmc-cmd {
+ rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ };
+
+ emmc_reset: emmc-reset {
+ rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ keys {
+ pwr_key: pwr-key {
+ rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ stby_pwren: stby-pwren {
+ rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ led_ctl: led-ctl {
+ rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio {
+ wifi_reg_on: wifi-reg-on {
+ rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_rst: bt-rst {
+ rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&saradc {
+ vref-supply = <&vcc_18>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/kernel/arch/arm64/boot/dts/rockchip/rk3368.dtsi
new file mode 100644
index 000000000..cc093a482
--- /dev/null
+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -0,0 +1,900 @@
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/rk3368-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+ compatible = "rockchip,rk3368";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ };
+
+ cpus {
+ #address-cells = <0x2>;
+ #size-cells = <0x0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu_b0>;
+ };
+ core1 {
+ cpu = <&cpu_b1>;
+ };
+ core2 {
+ cpu = <&cpu_b2>;
+ };
+ core3 {
+ cpu = <&cpu_b3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu_l0>;
+ };
+ core1 {
+ cpu = <&cpu_l1>;
+ };
+ core2 {
+ cpu = <&cpu_l2>;
+ };
+ core3 {
+ cpu = <&cpu_l3>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ cpu_sleep: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <0x3fffffff>;
+ exit-latency-us = <0x40000000>;
+ min-residency-us = <0xffffffff>;
+ };
+ };
+
+ cpu_l0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ cpu-idle-states = <&cpu_sleep>;
+ enable-method = "psci";
+ };
+
+ cpu_l1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ cpu-idle-states = <&cpu_sleep>;
+ enable-method = "psci";
+ };
+
+ cpu_l2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ cpu-idle-states = <&cpu_sleep>;
+ enable-method = "psci";
+ };
+
+ cpu_l3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ cpu-idle-states = <&cpu_sleep>;
+ enable-method = "psci";
+ };
+
+ cpu_b0: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x100>;
+ cpu-idle-states = <&cpu_sleep>;
+ enable-method = "psci";
+ };
+
+ cpu_b1: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x101>;
+ cpu-idle-states = <&cpu_sleep>;
+ enable-method = "psci";
+ };
+
+ cpu_b2: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x102>;
+ cpu-idle-states = <&cpu_sleep>;
+ enable-method = "psci";
+ };
+
+ cpu_b3: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x103>;
+ cpu-idle-states = <&cpu_sleep>;
+ enable-method = "psci";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu_l0>, <&cpu_l1>, <&cpu_l2>,
+ <&cpu_l3>, <&cpu_b0>, <&cpu_b1>,
+ <&cpu_b2>, <&cpu_b3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ sdmmc: dwmmc@ff0c0000 {
+ compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff0c0000 0x0 0x4000>;
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sdio0: dwmmc@ff0d0000 {
+ compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff0d0000 0x0 0x4000>;
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
+ <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc@ff0f0000 {
+ compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff0f0000 0x0 0x4000>;
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ saradc: saradc@ff100000 {
+ compatible = "rockchip,saradc";
+ reg = <0x0 0xff100000 0x0 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ status = "disabled";
+ };
+
+ spi0: spi@ff110000 {
+ compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff110000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ff120000 {
+ compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff120000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@ff130000 {
+ compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff130000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ff140000 {
+ compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+ reg = <0x0 0xff140000 0x0 0x1000>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ff150000 {
+ compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+ reg = <0x0 0xff150000 0x0 0x1000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@ff160000 {
+ compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+ reg = <0x0 0xff160000 0x0 0x1000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_xfer>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@ff170000 {
+ compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+ reg = <0x0 0xff170000 0x0 0x1000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_xfer>;
+ status = "disabled";
+ };
+
+ uart0: serial@ff180000 {
+ compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff180000 0x0 0x100>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@ff190000 {
+ compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff190000 0x0 0x100>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@ff1b0000 {
+ compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff1b0000 0x0 0x100>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart4: serial@ff1c0000 {
+ compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff1c0000 0x0 0x100>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ gmac: ethernet@ff290000 {
+ compatible = "rockchip,rk3368-gmac";
+ reg = <0x0 0xff290000 0x0 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ rockchip,grf = <&grf>;
+ clocks = <&cru SCLK_MAC>,
+ <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+ <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+ <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+ clock-names = "stmmaceth",
+ "mac_clk_rx", "mac_clk_tx",
+ "clk_mac_ref", "clk_mac_refout",
+ "aclk_mac", "pclk_mac";
+ status = "disabled";
+ };
+
+ usb_host0_ehci: usb@ff500000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xff500000 0x0 0x100>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>;
+ clock-names = "usbhost";
+ status = "disabled";
+ };
+
+ usb_otg: usb@ff580000 {
+ compatible = "rockchip,rk3368-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x0 0xff580000 0x0 0x40000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG0>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <275>;
+ g-tx-fifo-size = <256 128 128 64 64 32>;
+ g-use-dma;
+ status = "disabled";
+ };
+
+ i2c0: i2c@ff650000 {
+ compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+ reg = <0x0 0xff650000 0x0 0x1000>;
+ clocks = <&cru PCLK_I2C0>;
+ clock-names = "i2c";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ff660000 {
+ compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+ reg = <0x0 0xff660000 0x0 0x1000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ status = "disabled";
+ };
+
+ uart2: serial@ff690000 {
+ compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff690000 0x0 0x100>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ pmugrf: syscon@ff738000 {
+ compatible = "rockchip,rk3368-pmugrf", "syscon";
+ reg = <0x0 0xff738000 0x0 0x1000>;
+ };
+
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3368-cru";
+ reg = <0x0 0xff760000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ grf: syscon@ff770000 {
+ compatible = "rockchip,rk3368-grf", "syscon";
+ reg = <0x0 0xff770000 0x0 0x1000>;
+ };
+
+ wdt: watchdog@ff800000 {
+ compatible = "rockchip,rk3368-wdt", "snps,dw-wdt";
+ reg = <0x0 0xff800000 0x0 0x100>;
+ clocks = <&cru PCLK_WDT>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@ffb71000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x0 0xffb71000 0x0 0x1000>,
+ <0x0 0xffb72000 0x0 0x1000>,
+ <0x0 0xffb74000 0x0 0x2000>,
+ <0x0 0xffb76000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3368-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ ranges;
+
+ gpio0: gpio0@ff750000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff750000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO0>;
+ interrupts = <GIC_SPI 0x51 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio1: gpio1@ff780000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff780000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO1>;
+ interrupts = <GIC_SPI 0x52 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio2: gpio2@ff790000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff790000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO2>;
+ interrupts = <GIC_SPI 0x53 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio3: gpio3@ff7a0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff7a0000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO3>;
+ interrupts = <GIC_SPI 0x54 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_pwr: emmc-pwr {
+ rockchip,pins = <1 27 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_bus1: emmc-bus1 {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_bus4: emmc-bus4 {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>,
+ <1 19 RK_FUNC_2 &pcfg_pull_up>,
+ <1 20 RK_FUNC_2 &pcfg_pull_up>,
+ <1 21 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>,
+ <1 19 RK_FUNC_2 &pcfg_pull_up>,
+ <1 20 RK_FUNC_2 &pcfg_pull_up>,
+ <1 21 RK_FUNC_2 &pcfg_pull_up>,
+ <1 22 RK_FUNC_2 &pcfg_pull_up>,
+ <1 23 RK_FUNC_2 &pcfg_pull_up>,
+ <1 24 RK_FUNC_2 &pcfg_pull_up>,
+ <1 25 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ gmac {
+ rgmii_pins: rgmii-pins {
+ rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>,
+ <3 24 RK_FUNC_1 &pcfg_pull_none>,
+ <3 19 RK_FUNC_1 &pcfg_pull_none>,
+ <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>,
+ <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>,
+ <3 10 RK_FUNC_1 &pcfg_pull_none_12ma>,
+ <3 14 RK_FUNC_1 &pcfg_pull_none_12ma>,
+ <3 28 RK_FUNC_1 &pcfg_pull_none_12ma>,
+ <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>,
+ <3 15 RK_FUNC_1 &pcfg_pull_none>,
+ <3 16 RK_FUNC_1 &pcfg_pull_none>,
+ <3 17 RK_FUNC_1 &pcfg_pull_none>,
+ <3 18 RK_FUNC_1 &pcfg_pull_none>,
+ <3 25 RK_FUNC_1 &pcfg_pull_none>,
+ <3 20 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ rmii_pins: rmii-pins {
+ rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>,
+ <3 24 RK_FUNC_1 &pcfg_pull_none>,
+ <3 19 RK_FUNC_1 &pcfg_pull_none>,
+ <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>,
+ <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>,
+ <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>,
+ <3 15 RK_FUNC_1 &pcfg_pull_none>,
+ <3 16 RK_FUNC_1 &pcfg_pull_none>,
+ <3 20 RK_FUNC_1 &pcfg_pull_none>,
+ <3 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
+ <0 7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <2 21 RK_FUNC_1 &pcfg_pull_none>,
+ <2 22 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_none>,
+ <3 31 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>,
+ <1 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c4 {
+ i2c4_xfer: i2c4-xfer {
+ rockchip,pins = <3 24 RK_FUNC_2 &pcfg_pull_none>,
+ <3 25 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c5 {
+ i2c5_xfer: i2c5-xfer {
+ rockchip,pins = <3 26 RK_FUNC_2 &pcfg_pull_none>,
+ <3 27 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ sdio0 {
+ sdio0_bus1: sdio0-bus1 {
+ rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>,
+ <2 29 RK_FUNC_1 &pcfg_pull_up>,
+ <2 30 RK_FUNC_1 &pcfg_pull_up>,
+ <2 31 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins = <3 0 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins = <3 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdio0_cd: sdio0-cd {
+ rockchip,pins = <3 2 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_wp: sdio0-wp {
+ rockchip,pins = <3 3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_pwr: sdio0-pwr {
+ rockchip,pins = <3 4 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_bkpwr: sdio0-bkpwr {
+ rockchip,pins = <3 5 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_int: sdio0-int {
+ rockchip,pins = <3 6 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_cd: sdmcc-cd {
+ rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>,
+ <2 6 RK_FUNC_1 &pcfg_pull_up>,
+ <2 7 RK_FUNC_1 &pcfg_pull_up>,
+ <2 8 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins = <1 29 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_cs0: spi0-cs0 {
+ rockchip,pins = <1 24 RK_FUNC_3 &pcfg_pull_up>;
+ };
+ spi0_cs1: spi0-cs1 {
+ rockchip,pins = <1 25 RK_FUNC_3 &pcfg_pull_up>;
+ };
+ spi0_tx: spi0-tx {
+ rockchip,pins = <1 23 RK_FUNC_3 &pcfg_pull_up>;
+ };
+ spi0_rx: spi0-rx {
+ rockchip,pins = <1 22 RK_FUNC_3 &pcfg_pull_up>;
+ };
+ };
+
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins = <1 14 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_cs0: spi1-cs0 {
+ rockchip,pins = <1 15 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_cs1: spi1-cs1 {
+ rockchip,pins = <3 28 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_rx: spi1-rx {
+ rockchip,pins = <1 16 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_tx: spi1-tx {
+ rockchip,pins = <1 17 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ spi2 {
+ spi2_clk: spi2-clk {
+ rockchip,pins = <0 12 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi2_cs0: spi2-cs0 {
+ rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi2_rx: spi2-rx {
+ rockchip,pins = <0 10 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi2_tx: spi2-tx {
+ rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>,
+ <2 25 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <2 27 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <0 20 RK_FUNC_3 &pcfg_pull_up>,
+ <0 21 RK_FUNC_3 &pcfg_pull_none>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins = <0 22 RK_FUNC_3 &pcfg_pull_none>;
+ };
+
+ uart1_rts: uart1-rts {
+ rockchip,pins = <0 23 RK_FUNC_3 &pcfg_pull_none>;
+ };
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <2 6 RK_FUNC_2 &pcfg_pull_up>,
+ <2 5 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart2 */
+ };
+
+ uart3 {
+ uart3_xfer: uart3-xfer {
+ rockchip,pins = <3 29 RK_FUNC_2 &pcfg_pull_up>,
+ <3 30 RK_FUNC_3 &pcfg_pull_none>;
+ };
+
+ uart3_cts: uart3-cts {
+ rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ uart3_rts: uart3-rts {
+ rockchip,pins = <3 17 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart4 {
+ uart4_xfer: uart4-xfer {
+ rockchip,pins = <0 27 RK_FUNC_3 &pcfg_pull_up>,
+ <0 26 RK_FUNC_3 &pcfg_pull_none>;
+ };
+
+ uart4_cts: uart4-cts {
+ rockchip,pins = <0 24 RK_FUNC_3 &pcfg_pull_none>;
+ };
+
+ uart4_rts: uart4-rts {
+ rockchip,pins = <0 25 RK_FUNC_3 &pcfg_pull_none>;
+ };
+ };
+ };
+};
diff --git a/kernel/arch/arm64/boot/dts/skeleton.dtsi b/kernel/arch/arm64/boot/dts/skeleton.dtsi
deleted file mode 100644
index 38ead821b..000000000
--- a/kernel/arch/arm64/boot/dts/skeleton.dtsi
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Skeleton device tree; the bare minimum needed to boot; just include and
- * add a compatible value. The bootloader will typically populate the memory
- * node.
- */
-
-/ {
- #address-cells = <2>;
- #size-cells = <1>;
- chosen { };
- aliases { };
- memory { device_type = "memory"; reg = <0 0 0>; };
-};
diff --git a/kernel/arch/arm64/boot/dts/sprd/sc9836.dtsi b/kernel/arch/arm64/boot/dts/sprd/sc9836.dtsi
index ee34e1a36..63894c456 100644
--- a/kernel/arch/arm64/boot/dts/sprd/sc9836.dtsi
+++ b/kernel/arch/arm64/boot/dts/sprd/sc9836.dtsi
@@ -16,28 +16,28 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
};
- cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
};
- cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
@@ -75,14 +75,103 @@
};
};
- /* funnel input port 0~3 is reserved for ETMs */
+ /* funnel input port 0-4 */
port@1 {
+ reg = <0>;
+ funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+
+ port@3 {
+ reg = <2>;
+ funnel_in_port2: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+
+ port@4 {
+ reg = <3>;
+ funnel_in_port3: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+
+ port@5 {
reg = <4>;
funnel_in_port4: endpoint {
slave-mode;
remote-endpoint = <&stm_out>;
};
};
+ /* Other input ports aren't connected to anyone */
+ };
+ };
+
+ etm@10440000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x10440000 0 0x1000>;
+
+ cpu = <&cpu0>;
+ clocks = <&clk26mhz>;
+ clock-names = "apb_pclk";
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
+ };
+ };
+
+ etm@10540000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x10540000 0 0x1000>;
+
+ cpu = <&cpu1>;
+ clocks = <&clk26mhz>;
+ clock-names = "apb_pclk";
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
+ };
+ };
+
+ etm@10640000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x10640000 0 0x1000>;
+
+ cpu = <&cpu2>;
+ clocks = <&clk26mhz>;
+ clock-names = "apb_pclk";
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in_port2>;
+ };
+ };
+ };
+
+ etm@10740000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x10740000 0 0x1000>;
+
+ cpu = <&cpu3>;
+ clocks = <&clk26mhz>;
+ clock-names = "apb_pclk";
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in_port3>;
+ };
};
};
diff --git a/kernel/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/kernel/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index 0a3f40ecd..ce5d84825 100644
--- a/kernel/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/kernel/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -32,6 +32,10 @@
};
};
+&can0 {
+ status = "okay";
+};
+
&gem0 {
status = "okay";
phy-handle = <&phy0>;
@@ -42,6 +46,91 @@
};
};
+&gpio {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ eeprom@54 {
+ compatible = "at,24c64";
+ reg = <0x54>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ eeprom@55 {
+ compatible = "at,24c64";
+ reg = <0x55>;
+ };
+};
+
+&sata {
+ status = "okay";
+ ceva,broken-gen2;
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&sdhci1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <1>;
+ spi0_flash0: spi0_flash0@0 {
+ compatible = "m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ spi0_flash0@00000000 {
+ label = "spi0_flash0";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ num-cs = <1>;
+ spi1_flash0: spi1_flash0@0 {
+ compatible = "m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ spi1_flash0@00000000 {
+ label = "spi1_flash0";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+};
+
+&watchdog0 {
+ status = "okay";
+};
diff --git a/kernel/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/kernel/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 11e0b0004..857eda5c7 100644
--- a/kernel/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/kernel/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -96,74 +96,38 @@
#size-cells = <1>;
ranges;
- misc_clk: misc_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- ttc0: timer@ff110000 {
- compatible = "cdns,ttc";
- status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
- reg = <0x0 0xff110000 0x1000>;
- clocks = <&misc_clk>;
- timer-width = <32>;
- };
-
- ttc1: timer@ff120000 {
- compatible = "cdns,ttc";
- status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
- reg = <0x0 0xff120000 0x1000>;
- clocks = <&misc_clk>;
- timer-width = <32>;
- };
-
- ttc2: timer@ff130000 {
- compatible = "cdns,ttc";
- status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
- reg = <0x0 0xff130000 0x1000>;
- clocks = <&misc_clk>;
- timer-width = <32>;
- };
-
- ttc3: timer@ff140000 {
- compatible = "cdns,ttc";
+ can0: can@ff060000 {
+ compatible = "xlnx,zynq-can-1.0";
status = "disabled";
+ clocks = <&misc_clk &misc_clk>;
+ clock-names = "can_clk", "pclk";
+ reg = <0x0 0xff060000 0x1000>;
+ interrupts = <0 23 4>;
interrupt-parent = <&gic>;
- interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
- reg = <0x0 0xff140000 0x1000>;
- clocks = <&misc_clk>;
- timer-width = <32>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
};
- uart0: serial@ff000000 {
- compatible = "cdns,uart-r1p8";
+ can1: can@ff070000 {
+ compatible = "xlnx,zynq-can-1.0";
status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 21 4>;
- reg = <0x0 0xff000000 0x1000>;
- clock-names = "uart_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
+ clock-names = "can_clk", "pclk";
+ reg = <0x0 0xff070000 0x1000>;
+ interrupts = <0 24 4>;
+ interrupt-parent = <&gic>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
};
- uart1: serial@ff010000 {
- compatible = "cdns,uart-r1p8";
- status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 22 4>;
- reg = <0x0 0xff010000 0x1000>;
- clock-names = "uart_clk", "pclk";
- clocks = <&misc_clk &misc_clk>;
+ misc_clk: misc_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
};
gpio: gpio@ff0a0000 {
- compatible = "xlnx,zynq-gpio-1.0";
+ compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled";
#gpio-cells = <0x2>;
clocks = <&misc_clk>;
@@ -220,30 +184,6 @@
#size-cells = <0>;
};
- spi0: spi@ff040000 {
- compatible = "cdns,spi-r1p6";
- status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 19 4>;
- reg = <0x0 0xff040000 0x1000>;
- clock-names = "ref_clk", "pclk";
- clocks = <&misc_clk &misc_clk>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@ff050000 {
- compatible = "cdns,spi-r1p6";
- status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 20 4>;
- reg = <0x0 0xff050000 0x1000>;
- clock-names = "ref_clk", "pclk";
- clocks = <&misc_clk &misc_clk>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
i2c_clk: i2c_clk {
compatible = "fixed-clock";
#clock-cells = <0x0>;
@@ -272,6 +212,21 @@
#size-cells = <0>;
};
+ sata_clk: sata_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <75000000>;
+ };
+
+ sata: ahci@fd0c0000 {
+ compatible = "ceva,ahci-1v84";
+ status = "disabled";
+ reg = <0x0 0xfd0c0000 0x2000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 133 4>;
+ clocks = <&sata_clk>;
+ };
+
sdhci0: sdhci@ff160000 {
compatible = "arasan,sdhci-8.9a";
status = "disabled";
@@ -292,6 +247,122 @@
clocks = <&misc_clk>, <&misc_clk>;
};
+ smmu: smmu@fd800000 {
+ compatible = "arm,mmu-500";
+ reg = <0x0 0xfd800000 0x20000>;
+ #global-interrupts = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>;
+ };
+
+ spi0: spi@ff040000 {
+ compatible = "cdns,spi-r1p6";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 19 4>;
+ reg = <0x0 0xff040000 0x1000>;
+ clock-names = "ref_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@ff050000 {
+ compatible = "cdns,spi-r1p6";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 20 4>;
+ reg = <0x0 0xff050000 0x1000>;
+ clock-names = "ref_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ttc0: timer@ff110000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
+ reg = <0x0 0xff110000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ ttc1: timer@ff120000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
+ reg = <0x0 0xff120000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ ttc2: timer@ff130000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
+ reg = <0x0 0xff130000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ ttc3: timer@ff140000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
+ reg = <0x0 0xff140000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ uart0: serial@ff000000 {
+ compatible = "cdns,uart-r1p8";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 21 4>;
+ reg = <0x0 0xff000000 0x1000>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ };
+
+ uart1: serial@ff010000 {
+ compatible = "cdns,uart-r1p8";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 22 4>;
+ reg = <0x0 0xff010000 0x1000>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ };
+
+ usb0: usb@fe200000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 65 4>;
+ reg = <0x0 0xfe200000 0x40000>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&misc_clk>, <&misc_clk>;
+ };
+
+ usb1: usb@fe300000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 70 4>;
+ reg = <0x0 0xfe300000 0x40000>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&misc_clk>, <&misc_clk>;
+ };
+
watchdog0: watchdog@fd4d0000 {
compatible = "cdns,wdt-r1p2";
status = "disabled";