These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 36 insertions, 14 deletions

diff --git a/kernel/arch/arm/mm/Kconfig b/kernel/arch/arm/mm/Kconfig
index b4f92b9a1..41218867a 100644
--- a/kernel/arch/arm/mm/Kconfig
+++ b/kernel/arch/arm/mm/Kconfig
@@ -6,7 +6,7 @@ comment "Processor Type"
 
 # ARM7TDMI
 config CPU_ARM7TDMI
-	bool "Support ARM7TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -56,7 +56,7 @@ config CPU_ARM740T
 
 # ARM9TDMI
 config CPU_ARM9TDMI
-	bool "Support ARM9TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
@@ -419,28 +419,24 @@ config CPU_THUMBONLY
 config CPU_32v3
 	bool
 	select CPU_USE_DOMAINS if MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select NEED_KUSER_HELPERS
 	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v4
 	bool
 	select CPU_USE_DOMAINS if MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select NEED_KUSER_HELPERS
 	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v4T
 	bool
 	select CPU_USE_DOMAINS if MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select NEED_KUSER_HELPERS
 	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v5
 	bool
 	select CPU_USE_DOMAINS if MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select NEED_KUSER_HELPERS
 	select TLS_REG_EMUL if SMP || !MMU
 
@@ -604,6 +600,22 @@ config CPU_USE_DOMAINS
 	  This option enables or disables the use of domain switching
 	  via the set_fs() function.
 
+config CPU_V7M_NUM_IRQ
+	int "Number of external interrupts connected to the NVIC"
+	depends on CPU_V7M
+	default 90 if ARCH_STM32
+	default 38 if ARCH_EFM32
+	default 112 if SOC_VF610
+	default 240
+	help
+	  This option indicates the number of interrupts connected to the NVIC.
+	  The value can be larger than the real number of interrupts supported
+	  by the system, but must not be lower.
+	  The default value is 240, corresponding to the maximum number of
+	  interrupts supported by the NVIC on Cortex-M family.
+
+	  If unsure, keep default value.
+
 #
 # CPU supports 36-bit I/O
 #
@@ -624,6 +636,10 @@ config ARM_LPAE
 
 	  If unsure, say N.
 
+config ARM_PV_FIXUP
+	def_bool y
+	depends on ARM_LPAE && ARM_PATCH_PHYS_VIRT && ARCH_KEYSTONE
+
 config ARCH_PHYS_ADDR_T_64BIT
 	def_bool ARM_LPAE
 
@@ -785,14 +801,6 @@ config TLS_REG_EMUL
 	  a few prototypes like that in existence) and therefore access to
 	  that required register must be emulated.
 
-config NEEDS_SYSCALL_FOR_CMPXCHG
-	bool
-	select NEED_KUSER_HELPERS
-	help
-	  SMP on a pre-ARMv6 processor?  Well OK then.
-	  Forget about fast user space cmpxchg support.
-	  It is just not possible.
-
 config NEED_KUSER_HELPERS
 	bool
 
@@ -863,6 +871,7 @@ config OUTER_CACHE
 
 config OUTER_CACHE_SYNC
 	bool
+	select ARM_HEAVY_MB
 	help
 	  The outer cache has a outer_cache_fns.sync function pointer
 	  that can be used to drain the write buffer of the outer cache.
@@ -965,6 +974,16 @@ config CACHE_TAUROS2
 	  This option enables the Tauros2 L2 cache controller (as
 	  found on PJ1/PJ4).
 
+config CACHE_UNIPHIER
+	bool "Enable the UniPhier outer cache controller"
+	depends on ARCH_UNIPHIER
+	default y
+	select OUTER_CACHE
+	select OUTER_CACHE_SYNC
+	help
+	  This option enables the UniPhier outer cache (system cache)
+	  controller.
+
 config CACHE_XSC3L2
 	bool "Enable the L2 cache on XScale3"
 	depends on CPU_XSC3
@@ -1011,6 +1030,9 @@ config ARCH_HAS_BARRIERS
 	  This option allows the use of custom mandatory barriers
 	  included via the mach/barriers.h file.
 
+config ARM_HEAVY_MB
+	bool
+
 config ARCH_SUPPORTS_BIG_ENDIAN
 	bool
 	help