These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

3 files changed, 2 insertions, 129 deletions

diff --git a/kernel/Documentation/s390/00-INDEX b/kernel/Documentation/s390/00-INDEX
index 10c874ebd..9189535f6 100644
--- a/kernel/Documentation/s390/00-INDEX
+++ b/kernel/Documentation/s390/00-INDEX
@@ -16,8 +16,6 @@ Debugging390.txt
 	- hints for debugging on s390 systems.
 driver-model.txt
 	- information on s390 devices and the driver model.
-kvm.txt
-	- ioctl calls to /dev/kvm on s390.
 monreader.txt
 	- information on accessing the z/VM monitor stream from Linux.
 qeth.txt
diff --git a/kernel/Documentation/s390/kvm.txt b/kernel/Documentation/s390/kvm.txt
deleted file mode 100644
index 85f3280d7..000000000
--- a/kernel/Documentation/s390/kvm.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-*** BIG FAT WARNING ***
-The kvm module is currently in EXPERIMENTAL state for s390. This means that
-the interface to the module is not yet considered to remain stable. Thus, be
-prepared that we keep breaking your userspace application and guest
-compatibility over and over again until we feel happy with the result. Make sure
-your guest kernel, your host kernel, and your userspace launcher are in a
-consistent state.
-
-This Documentation describes the unique ioctl calls to /dev/kvm, the resulting
-kvm-vm file descriptors, and the kvm-vcpu file descriptors that differ from x86.
-
-1. ioctl calls to /dev/kvm
-KVM does support the following ioctls on s390 that are common with other
-architectures and do behave the same:
-KVM_GET_API_VERSION
-KVM_CREATE_VM		(*) see note
-KVM_CHECK_EXTENSION
-KVM_GET_VCPU_MMAP_SIZE
-
-Notes:
-* KVM_CREATE_VM may fail on s390, if the calling process has multiple
-threads and has not called KVM_S390_ENABLE_SIE before.
-
-In addition, on s390 the following architecture specific ioctls are supported:
-ioctl:		KVM_S390_ENABLE_SIE
-args:		none
-see also:	include/linux/kvm.h
-This call causes the kernel to switch on PGSTE in the user page table. This
-operation is needed in order to run a virtual machine, and it requires the
-calling process to be single-threaded. Note that the first call to KVM_CREATE_VM
-will implicitly try to switch on PGSTE if the user process has not called
-KVM_S390_ENABLE_SIE before. User processes that want to launch multiple threads
-before creating a virtual machine have to call KVM_S390_ENABLE_SIE, or will
-observe an error calling KVM_CREATE_VM. Switching on PGSTE is a one-time
-operation, is not reversible, and will persist over the entire lifetime of
-the calling process. It does not have any user-visible effect other than a small
-performance penalty.
-
-2. ioctl calls to the kvm-vm file descriptor
-KVM does support the following ioctls on s390 that are common with other
-architectures and do behave the same:
-KVM_CREATE_VCPU
-KVM_SET_USER_MEMORY_REGION      (*) see note
-KVM_GET_DIRTY_LOG		(**) see note
-
-Notes:
-*  kvm does only allow exactly one memory slot on s390, which has to start
-   at guest absolute address zero and at a user address that is aligned on any
-   page boundary. This hardware "limitation" allows us to have a few unique
-   optimizations. The memory slot doesn't have to be filled
-   with memory actually, it may contain sparse holes. That said, with different
-   user memory layout this does still allow a large flexibility when
-   doing the guest memory setup.
-** KVM_GET_DIRTY_LOG doesn't work properly yet. The user will receive an empty
-log. This ioctl call is only needed for guest migration, and we intend to
-implement this one in the future.
-
-In addition, on s390 the following architecture specific ioctls for the kvm-vm
-file descriptor are supported:
-ioctl:		KVM_S390_INTERRUPT
-args:		struct kvm_s390_interrupt *
-see also:	include/linux/kvm.h
-This ioctl is used to submit a floating interrupt for a virtual machine.
-Floating interrupts may be delivered to any virtual cpu in the configuration.
-Only some interrupt types defined in include/linux/kvm.h make sense when
-submitted as floating interrupts. The following interrupts are not considered
-to be useful as floating interrupts, and a call to inject them will result in
--EINVAL error code: program interrupts and interprocessor signals. Valid
-floating interrupts are:
-KVM_S390_INT_VIRTIO
-KVM_S390_INT_SERVICE
-
-3. ioctl calls to the kvm-vcpu file descriptor
-KVM does support the following ioctls on s390 that are common with other
-architectures and do behave the same:
-KVM_RUN
-KVM_GET_REGS
-KVM_SET_REGS
-KVM_GET_SREGS
-KVM_SET_SREGS
-KVM_GET_FPU
-KVM_SET_FPU
-
-In addition, on s390 the following architecture specific ioctls for the
-kvm-vcpu file descriptor are supported:
-ioctl:		KVM_S390_INTERRUPT
-args:		struct kvm_s390_interrupt *
-see also:	include/linux/kvm.h
-This ioctl is used to submit an interrupt for a specific virtual cpu.
-Only some interrupt types defined in include/linux/kvm.h make sense when
-submitted for a specific cpu. The following interrupts are not considered
-to be useful, and a call to inject them will result in -EINVAL error code:
-service processor calls and virtio interrupts. Valid interrupt types are:
-KVM_S390_PROGRAM_INT
-KVM_S390_SIGP_STOP
-KVM_S390_RESTART
-KVM_S390_SIGP_SET_PREFIX
-KVM_S390_INT_EMERGENCY
-
-ioctl:		KVM_S390_STORE_STATUS
-args:		unsigned long
-see also:	include/linux/kvm.h
-This ioctl stores the state of the cpu at the guest real address given as
-argument, unless one of the following values defined in include/linux/kvm.h
-is given as argument:
-KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in
-absolute lowcore as defined by the principles of operation
-KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in
-its prefix page just like the dump tool that comes with zipl. This is useful
-to create a system dump for use with lkcdutils or crash.
-
-ioctl:		KVM_S390_SET_INITIAL_PSW
-args:		struct kvm_s390_psw *
-see also:	include/linux/kvm.h
-This ioctl can be used to set the processor status word (psw) of a stopped cpu
-prior to running it with KVM_RUN. Note that this call is not required to modify
-the psw during sie intercepts that fall back to userspace because struct kvm_run
-does contain the psw, and this value is evaluated during reentry of KVM_RUN
-after the intercept exit was recognized.
-
-ioctl:		KVM_S390_INITIAL_RESET
-args:		none
-see also:	include/linux/kvm.h
-This ioctl can be used to perform an initial cpu reset as defined by the
-principles of operation. The target cpu has to be in stopped state.
diff --git a/kernel/Documentation/s390/qeth.txt b/kernel/Documentation/s390/qeth.txt
index 74122ada9..aa06fcf5f 100644
--- a/kernel/Documentation/s390/qeth.txt
+++ b/kernel/Documentation/s390/qeth.txt
@@ -1,6 +1,6 @@
 IBM s390 QDIO Ethernet Driver
 
-HiperSockets Bridge Port Support
+OSA and HiperSockets Bridge Port Support
 
 Uevents
 
@@ -8,7 +8,7 @@ To generate the events the device must be assigned a role of either
 a primary or a secondary Bridge Port. For more information, see
 "z/VM Connectivity, SC24-6174".
 
-When run on HiperSockets Bridge Capable Port hardware, and the state
+When run on an OSA or HiperSockets Bridge Capable Port hardware, and the state
 of some configured Bridge Port device on the channel changes, a udev
 event with ACTION=CHANGE is emitted on behalf of the corresponding
 ccwgroup device. The event has the following attributes: