Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 50 insertions, 0 deletions

diff --git a/kernel/Documentation/devicetree/bindings/usb/dwc3.txt b/kernel/Documentation/devicetree/bindings/usb/dwc3.txt
new file mode 100644
index 000000000..5cc364309
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -0,0 +1,50 @@
+synopsys DWC3 CORE
+
+DWC3- USB3 CONTROLLER
+
+Required properties:
+ - compatible: must be "snps,dwc3"
+ - reg : Address and length of the register set for the device
+ - interrupts: Interrupts used by the dwc3 controller.
+
+Optional properties:
+ - usb-phy : array of phandle for the PHY device.  The first element
+   in the array is expected to be a handle to the USB2/HS PHY and
+   the second element is expected to be a handle to the USB3/SS PHY
+ - phys: from the *Generic PHY* bindings
+ - phy-names: from the *Generic PHY* bindings
+ - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+ - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
+ - snps,disable_scramble_quirk: true when SW should disable data scrambling.
+	Only really useful for FPGA builds.
+ - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
+ - snps,lpm-nyet-threshold: LPM NYET threshold
+ - snps,u2exit_lfps_quirk: set if we want to enable u2exit lfps quirk
+ - snps,u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
+ - snps,req_p1p2p3_quirk: when set, the core will always request for
+			P1/P2/P3 transition sequence.
+ - snps,del_p1p2p3_quirk: when set core will delay P1/P2/P3 until a certain
+			amount of 8B10B errors occur.
+ - snps,del_phy_power_chg_quirk: when set core will delay PHY power change
+			from P0 to P1/P2/P3.
+ - snps,lfps_filter_quirk: when set core will filter LFPS reception.
+ - snps,rx_detect_poll_quirk: when set core will disable a 400us delay to start
+			Polling LFPS after RX.Detect.
+ - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value.
+ - snps,tx_de_emphasis: the value driven to the PHY is controlled by the
+			LTSSM during USB3 Compliance mode.
+ - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy.
+ - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy.
+ - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
+			utmi_l1_suspend_n, false when asserts utmi_sleep_n
+ - snps,hird-threshold: HIRD threshold
+
+This is usually a subnode to DWC3 glue to which it is connected.
+
+dwc3@4a030000 {
+	compatible = "snps,dwc3";
+	reg = <0x4a030000 0xcfff>;
+	interrupts = <0 92 4>
+	usb-phy = <&usb2_phy>, <&usb3,phy>;
+	tx-fifo-resize;
+};