Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

7 files changed, 310 insertions, 0 deletions

diff --git a/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
new file mode 100644
index 000000000..9a4295b54
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
@@ -0,0 +1,17 @@
+NVIDIA Tegra AHB
+
+Required properties:
+- compatible : For Tegra20, must contain "nvidia,tegra20-ahb".  For
+  Tegra30, must contain "nvidia,tegra30-ahb".  Otherwise, must contain
+  '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124,
+  tegra132, or tegra210.
+- reg : Should contain 1 register ranges(address and length).  For
+  Tegra20, Tegra30, and Tegra114 chips, the value must be <0x6000c004
+  0x10c>.  For Tegra124, Tegra132 and Tegra210 chips, the value should
+  be be <0x6000c000 0x150>.
+
+Example (for a Tegra20 chip):
+	ahb: ahb@6000c004 {
+		compatible = "nvidia,tegra20-ahb";
+		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
+	};
diff --git a/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt
new file mode 100644
index 000000000..4c33b29dc
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt
@@ -0,0 +1,100 @@
+Embedded Memory Controller
+
+Properties:
+- name : Should be emc
+- #address-cells : Should be 1
+- #size-cells : Should be 0
+- compatible : Should contain "nvidia,tegra20-emc".
+- reg : Offset and length of the register set for the device
+- nvidia,use-ram-code : If present, the sub-nodes will be addressed
+  and chosen using the ramcode board selector. If omitted, only one
+  set of tables can be present and said tables will be used
+  irrespective of ram-code configuration.
+
+Child device nodes describe the memory settings for different configurations and clock rates.
+
+Example:
+
+	memory-controller@7000f400 {
+		#address-cells = < 1 >;
+		#size-cells = < 0 >;
+		compatible = "nvidia,tegra20-emc";
+		reg = <0x7000f4000 0x200>;
+	}
+
+
+Embedded Memory Controller ram-code table
+
+If the emc node has the nvidia,use-ram-code property present, then the
+next level of nodes below the emc table are used to specify which settings
+apply for which ram-code settings.
+
+If the emc node lacks the nvidia,use-ram-code property, this level is omitted
+and the tables are stored directly under the emc node (see below).
+
+Properties:
+
+- name : Should be emc-tables
+- nvidia,ram-code : the binary representation of the ram-code board strappings
+  for which this node (and children) are valid.
+
+
+
+Embedded Memory Controller configuration table
+
+This is a table containing the EMC register settings for the various
+operating speeds of the memory controller. They are always located as
+subnodes of the emc controller node.
+
+There are two ways of specifying which tables to use:
+
+* The simplest is if there is just one set of tables in the device tree,
+  and they will always be used (based on which frequency is used).
+  This is the preferred method, especially when firmware can fill in
+  this information based on the specific system information and just
+  pass it on to the kernel.
+
+* The slightly more complex one is when more than one memory configuration
+  might exist on the system.  The Tegra20 platform handles this during
+  early boot by selecting one out of possible 4 memory settings based
+  on a 2-pin "ram code" bootstrap setting on the board. The values of
+  these strappings can be read through a register in the SoC, and thus
+  used to select which tables to use.
+
+Properties:
+- name : Should be emc-table
+- compatible : Should contain "nvidia,tegra20-emc-table".
+- reg : either an opaque enumerator to tell different tables apart, or
+  the valid frequency for which the table should be used (in kHz).
+- clock-frequency : the clock frequency for the EMC at which this
+  table should be used (in kHz).
+- nvidia,emc-registers : a 46 word array of EMC registers to be programmed
+  for operation at the 'clock-frequency' setting.
+  The order and contents of the registers are:
+    RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT,
+    WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR,
+    PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW,
+    TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE,
+    ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE,
+    ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0,
+    CFG_CLKTRIM_1, CFG_CLKTRIM_2
+
+		emc-table@166000 {
+			reg = <166000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = < 166000 >;
+			nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+						 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+						 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+						 0 0 0 0 >;
+		};
+
+		emc-table@333000 {
+			reg = <333000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = < 333000 >;
+			nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+						 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+						 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+						 0 0 0 0 >;
+		};
diff --git a/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
new file mode 100644
index 000000000..ccf0adddc
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
@@ -0,0 +1,12 @@
+NVIDIA Tegra Flow Controller
+
+Required properties:
+- compatible: Should be "nvidia,tegra<chip>-flowctrl"
+- reg: Should contain one register range (address and length)
+
+Example:
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra20-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
diff --git a/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
new file mode 100644
index 000000000..866d93421
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
@@ -0,0 +1,16 @@
+NVIDIA Tegra20 MC(Memory Controller)
+
+Required properties:
+- compatible : "nvidia,tegra20-mc"
+- reg : Should contain 2 register ranges(address and length); see the
+  example below. Note that the MC registers are interleaved with the
+  GART registers, and hence must be represented as multiple ranges.
+- interrupts : Should contain MC General interrupt.
+
+Example:
+	memory-controller@0x7000f000 {
+		compatible = "nvidia,tegra20-mc";
+		reg = <0x7000f000 0x024
+		       0x7000f03c 0x3c4>;
+		interrupts = <0 77 0x04>;
+	};
diff --git a/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
new file mode 100644
index 000000000..02c27004d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -0,0 +1,115 @@
+NVIDIA Tegra Power Management Controller (PMC)
+
+The PMC block interacts with an external Power Management Unit. The PMC
+mostly controls the entry and exit of the system from different sleep
+modes. It provides power-gating controllers for SoC and CPU power-islands.
+
+Required properties:
+- name : Should be pmc
+- compatible : For Tegra20, must contain "nvidia,tegra20-pmc".  For Tegra30,
+  must contain "nvidia,tegra30-pmc".  For Tegra114, must contain
+  "nvidia,tegra114-pmc".  For Tegra124, must contain "nvidia,tegra124-pmc".
+  Otherwise, must contain "nvidia,<chip>-pmc", plus at least one of the
+  above, where <chip> is tegra132.
+- reg : Offset and length of the register set for the device
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  "pclk" (The Tegra clock of that name),
+  "clk32k_in" (The 32KHz clock input to Tegra).
+
+Optional properties:
+- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
+  The PMU is an external Power Management Unit, whose interrupt output
+  signal is fed into the PMC. This signal is optionally inverted, and then
+  fed into the ARM GIC. The PMC is not involved in the detection or
+  handling of this interrupt signal, merely its inversion.
+- nvidia,suspend-mode : The suspend mode that the platform should use.
+  Valid values are 0, 1 and 2:
+  0 (LP0): CPU + Core voltage off and DRAM in self-refresh
+  1 (LP1): CPU voltage off and DRAM in self-refresh
+  2 (LP2): CPU voltage off
+- nvidia,core-power-req-active-high : Boolean, core power request active-high
+- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
+- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
+- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
+			   is enabled.
+
+Required properties when nvidia,suspend-mode is specified:
+- nvidia,cpu-pwr-good-time : CPU power good time in uS.
+- nvidia,cpu-pwr-off-time : CPU power off time in uS.
+- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
+			      Core power good time in uS.
+- nvidia,core-pwr-off-time : Core power off time in uS.
+
+Required properties when nvidia,suspend-mode=<0>:
+- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
+  The LP0 vector contains the warm boot code that is executed by AVP when
+  resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
+  processor and always being the first boot processor when chip is power on
+  or resume from deep sleep mode. When the system is resumed from the deep
+  sleep mode, the warm boot code will restore some PLLs, clocks and then
+  bring up CPU0 for resuming the system.
+
+Hardware-triggered thermal reset:
+On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists,
+hardware-triggered thermal reset will be enabled.
+
+Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
+- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are
+                             described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the
+                             Tegra K1 Technical Reference Manual.
+- nvidia,bus-addr : Bus address of the PMU on the I2C bus
+- nvidia,reg-addr : I2C register address to write poweroff command to
+- nvidia,reg-data : Poweroff command to write to PMU
+
+Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
+- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command.
+                     Defaults to 0. Valid values are described in section 12.5.2
+                     "Pinmux Support" of the Tegra4 Technical Reference Manual.
+
+Example:
+
+/ SoC dts including file
+pmc@7000f400 {
+	compatible = "nvidia,tegra20-pmc";
+	reg = <0x7000e400 0x400>;
+	clocks = <&tegra_car 110>, <&clk32k_in>;
+	clock-names = "pclk", "clk32k_in";
+	nvidia,invert-interrupt;
+	nvidia,suspend-mode = <1>;
+	nvidia,cpu-pwr-good-time = <2000>;
+	nvidia,cpu-pwr-off-time = <100>;
+	nvidia,core-pwr-good-time = <3845 3845>;
+	nvidia,core-pwr-off-time = <458>;
+	nvidia,core-power-req-active-high;
+	nvidia,sys-clock-req-active-high;
+	nvidia,lp0-vec = <0xbdffd000 0x2000>;
+};
+
+/ Tegra board dts file
+{
+	...
+	pmc@7000f400 {
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+	...
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+	...
+};
diff --git a/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
new file mode 100644
index 000000000..ea670a5d7
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
@@ -0,0 +1,32 @@
+NVIDIA Tegra Activity Monitor
+
+The activity monitor block collects statistics about the behaviour of other
+components in the system. This information can be used to derive the rate at
+which the external memory needs to be clocked in order to serve all requests
+from the monitored clients.
+
+Required properties:
+- compatible: should be "nvidia,tegra<chip>-actmon"
+- reg: offset and length of the register set for the device
+- interrupts: standard interrupt property
+- clocks: Must contain a phandle and clock specifier pair for each entry in
+clock-names. See ../../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - actmon
+  - emc
+- resets: Must contain an entry for each entry in reset-names. See
+../../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - actmon
+
+Example:
+	actmon@6000c800 {
+		compatible = "nvidia,tegra124-actmon";
+		reg = <0x0 0x6000c800 0x0 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
+			 <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car 119>;
+		reset-names = "actmon";
+	};
diff --git a/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
new file mode 100644
index 000000000..bdf1a6124
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
@@ -0,0 +1,18 @@
+NVIDIA Tegra30 MC(Memory Controller)
+
+Required properties:
+- compatible : "nvidia,tegra30-mc"
+- reg : Should contain 4 register ranges(address and length); see the
+  example below. Note that the MC registers are interleaved with the
+  SMMU registers, and hence must be represented as multiple ranges.
+- interrupts : Should contain MC General interrupt.
+
+Example:
+	memory-controller {
+		compatible = "nvidia,tegra30-mc";
+		reg = <0x7000f000 0x010
+		       0x7000f03c 0x1b4
+		       0x7000f200 0x028
+		       0x7000f284 0x17c>;
+		interrupts = <0 77 0x04>;
+	};