summaryrefslogtreecommitdiffstats
path: root/docs/deployment-guide.rst
diff options
context:
space:
mode:
authorRihab Banday <rihab.banday@ericsson.com>2020-08-11 08:56:54 +0000
committerVictor Morales <v.morales@samsung.com>2020-08-17 18:39:30 -0400
commit607c277a52375807d56922cce817c44d6c51bd4a (patch)
treed10460d88932b3fbdd3b539cba766084662a99a1 /docs/deployment-guide.rst
parent28d1cee5c7b95ae905a4481245d5d5650c87e101 (diff)
Adding Deployment Guide
This patch adds a deployment guide that describes the steps to initiate the deployment. Change-Id: I1835c0b6eee5945990ae078a20d2e2c92516c6b1 Signed-off-by: Rihab Banday <rihab.banday@ericsson.com>
Diffstat (limited to 'docs/deployment-guide.rst')
-rw-r--r--docs/deployment-guide.rst60
1 files changed, 60 insertions, 0 deletions
diff --git a/docs/deployment-guide.rst b/docs/deployment-guide.rst
new file mode 100644
index 0000000..0875bcf
--- /dev/null
+++ b/docs/deployment-guide.rst
@@ -0,0 +1,60 @@
+===================================
+Welcome to Kuberef's documentation!
+===================================
+
+Introduction
+============
+
+Kuberef aims to develop and deliver a Kubernetes-based reference
+implementation according to CNTT RA-2 in close collaboration with the
+CNTT RI-2 workstream.
+
+The entire implementation is divided into two stages - Host provisioning
+and Kubernetes provisioning.
+
+This guide describes how to get started with a potential RI-2 deployment
+using `Cloud Infra Automation Framework <https://docs.nordix.org/submodules/infra/engine/docs/user-guide.html#framework-user-guide>`_
+for the Host provisioning stage and Intel's `BMRA <https://github.com/intel/container-experience-kits>`_
+for the Kubernetes provisioning stage.
+
+.. note::
+
+ This is just an example of a possible RI-2 deployment. Kuberef aims to
+ support and include other potential hardware and Kubernetes deployers as well. More
+ details can be found in the `Kuberef Wiki <https://wiki.opnfv.org/spaces/viewspace.action?key=KUB>`_.
+
+Infrastructure Prerequisites
+=============================
+
+You need one physical server acting as a jump server along with minimum of two additional
+servers on which RI-2 will be deployed. Please refer to Chapter 3 in CNTT RI-2 Documentation
+for detailed information on the server and network specifications.
+
+Additionally, please make sure that you have KVM installed and set up on your jump server. This
+is needed because the deployment will spin up a VM which will then carry out the host and
+Kubernetes installation.
+
+Deployment
+=============================
+
+Before initiating the deployment, please note the following:
+
+1. Add your configuration templates, ``pdf.yaml`` and ``idf.yaml`` under ``hw_config/<vendor>``.
+
+2. Modify the environmental variables defined in ``deploy.env`` to match your setup.
+
+3. Update ``hw_config/<vendor>/setup_network.sh`` with your correct networking info. This particular
+ script sets up networking on the provisioned nodes after the host provisioning stage is successful.
+
+.. note::
+
+ Depending on your setup, this script might not be needed. #WIP
+
+Once ready, issue the following command to initiate the deployment
+
+.. code-block:: bash
+
+ ./deploy.sh
+
+
+Once the deployment is successful, you will have a fully functional RI-2 setup!