summaryrefslogtreecommitdiffstats
path: root/ci
diff options
context:
space:
mode:
Diffstat (limited to 'ci')
-rwxr-xr-xci/01-deploybundle.sh4
-rwxr-xr-xci/02-maasdeploy.sh12
-rwxr-xr-xci/maas/cengn_lynx/pod1/deployment.yaml211
-rw-r--r--ci/maas/cengn_lynx/pod1/environments.yaml40
4 files changed, 267 insertions, 0 deletions
diff --git a/ci/01-deploybundle.sh b/ci/01-deploybundle.sh
index 9452d7ae..8164c7e7 100755
--- a/ci/01-deploybundle.sh
+++ b/ci/01-deploybundle.sh
@@ -50,6 +50,10 @@ case "$3" in
# Choose the external port to go out from gateway to use.
sed -i -- 's/# "ext-port": "eth1"/ "ext-port": "eth1"/g' ./bundles.yaml
;;
+ 'cengnlynxpod1' )
+ sed -i -- 's/10.4.1.1/10.120.0.1/g' ./bundles.yaml
+ sed -i -- 's/# "ext-port": "eth1"/ "ext-port": "eth2.1202"/g' ./bundles.yaml
+ ;;
'default' )
sed -i -- 's/10.4.1.1/192.168.122.1/g' ./bundles.yaml
sed -i -- 's/# "ext-port": "eth1"/ "ext-port": "eth1"/g' ./bundles.yaml
diff --git a/ci/02-maasdeploy.sh b/ci/02-maasdeploy.sh
index fc42574d..cc34e342 100755
--- a/ci/02-maasdeploy.sh
+++ b/ci/02-maasdeploy.sh
@@ -20,6 +20,9 @@ case "$1" in
'juniperpod1' )
cp maas/juniper/pod1/deployment.yaml ./deployment.yaml
;;
+ 'cengnlynxpod1' )
+ cp maas/cengn_lynx/pod1/deployment.yaml ./deployment.yaml
+ ;;
* )
virtinstall=1
./cleanvm.sh
@@ -194,6 +197,15 @@ case "$1" in
;;
'juniperpod1' )
;;
+ 'cengnlynxpod1' )
+ maas refresh
+ crvlanupdsubnet vlan1201 1 "DataNetwork" 1201 2 || true
+ crvlanupdsubnet vlan1202 2 "PublicNetwork" 1202 3 || true
+ crnodevlanint $vlan1201 || true
+ crnodevlanint $vlan1202 || true
+ enableautomode eth2.1201 AUTO "172.16.121.3/24" compute || true
+ enableautomode eth2.1201 AUTO "172.16.121.3/24" control || true
+ ;;
esac
echo " .... MAAS deployment finished successfully ...."
diff --git a/ci/maas/cengn_lynx/pod1/deployment.yaml b/ci/maas/cengn_lynx/pod1/deployment.yaml
new file mode 100755
index 00000000..0652dcc9
--- /dev/null
+++ b/ci/maas/cengn_lynx/pod1/deployment.yaml
@@ -0,0 +1,211 @@
+# This file defines the deployment for the MAAS environment which is to be
+# deployed and automated.
+cengn-lynx-pod1:
+ maas:
+ # Defines the general setup for the MAAS environment, including the
+ # username and password for the host as well as the MAAS server.
+ user: ubuntu
+ password: ubuntu
+
+ # Contains the virtual machine parameters for creating the MAAS virtual
+ # server. Here you can configure the name of the virsh domain, the
+ # parameters for how the network is attached.
+ name: opnfv-maas-cengn-lynx
+ # TODO interfaces: ['bridge=brAdm,model=virtio','bridge=brData,model=virtio','bridge=brPublic,model=virtio']
+ interfaces: ['bridge=brAdm,model=virtio','bridge=brPublic,model=virtio']
+ memory: 4096
+ vcpus: 4
+ arch: amd64
+ pool: default
+ disk_size: 160G
+
+ # Apt http proxy setting(s)
+ apt_http_proxy:
+
+ apt_sources:
+ - ppa:maas/next
+ - ppa:juju/stable
+
+ # Virsh power settings
+ # Specifies the uri and keys to use for virsh power control of the
+ # juju virtual machine. If the uri is omitted, the value for the
+ # --remote is used. If no power settings are desired, then do not
+ # supply the virsh block.
+ virsh:
+ rsa_priv_key: /home/ubuntu/.ssh/id_rsa
+ rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
+ uri: qemu+ssh://ubuntu@10.120.0.2/system
+
+ # Defines the IP Address that the configuration script will use to
+ # to access the MAAS controller via SSH.
+ ip_address: 10.120.0.3
+
+ # This section allows the user to set a series of options on the
+ # MAAS server itself. The list of config options can be found in
+ # the upstream MAAS documentation:
+ # - http://maas.ubuntu.com/docs/api.html#maas-server
+ settings:
+ upstream_dns: 192.168.60.1
+ maas_name: cengnlynxpod1
+ # kernel_opts: "console=tty0 console=ttyS1,115200n8"
+ # ntp_server: ntp.ubuntu.com
+
+ # This section is used to define the networking parameters for when
+ # the node first comes up. It is fed into the meta-data cloud-init
+ # configuration and is used to configure the networking piece of the
+ # service. The contents of this section are written directly to the
+ # /etc/network/interfaces file.
+ #
+ # Please note, this is slightly different than the
+ # node-group-interfaces section below. This will configure the
+ # machine's networking params, and the node-group-interfaces will
+ # configure the maas node-group interfaces which is used for
+ # controlling the dhcp, dns, etc.
+ network_config: |
+ auto lo
+ iface lo inet loopback
+
+ auto eth0
+ iface eth0 inet static
+ address 10.120.0.3
+ netmask 255.255.255.0
+ network 10.120.0.0
+ broadcast 10.120.0.255
+ gateway 10.120.0.254
+ dns-nameservers 192.168.60.1 8.8.8.8 127.0.0.1
+
+ auto eth1
+ iface eth1 inet static
+ address 172.16.121.3
+ netmask 255.255.255.0
+
+ auto eth2
+ iface eth2 inet static
+ address 172.16.122.3
+ netmask 255.255.255.0
+
+
+ # The node-group-interfaces section is used to configure the MAAS
+ # network interfaces. Basic configuration is supported, such as which
+ # device should be bound, the range of IP addresses, etc.
+ # Note: this may contain the special identifiers:
+ # ${maas_net} - the first 3 octets of the ipv4 address
+ # ${maas_ip} - the ip address of the MAAS controller
+ node_group_ifaces:
+ - device: eth0
+ ip: 10.120.0.3
+ subnet_mask: 255.255.255.0
+ broadcast_ip: 10.120.0.255
+ router_ip: 10.120.0.254
+ static_range:
+ low: 10.120.0.20
+ high: 10.120.0.100
+ dynamic_range:
+ low: 10.120.0.101
+ high: 10.120.0.200
+ - device: eth1
+ ip: 172.16.121.3
+ subnet_mask: 255.255.255.0
+ broadcast_ip: 172.16.121.255
+ management: 1
+ static_range:
+ low: 172.16.121.20
+ high: 172.16.121.100
+ dynamic_range:
+ low: 172.16.121.101
+ high: 172.16.121.200
+ - device: eth2
+ ip: 172.16.122.3
+ subnet_mask: 255.255.255.0
+ broadcast_ip: 172.16.122.255
+ management: 1
+ static_range:
+ low: 172.16.122.20
+ high: 172.16.122.100
+ dynamic_range:
+ low: 172.16.122.101
+ high: 172.16.122.200
+
+ # Defines the physical nodes which are added to the MAAS cluster
+ # controller upon startup of the node.
+ nodes:
+ - name: node1-compute
+ tags: compute
+ architecture: amd64/generic
+ mac_addresses:
+ - "0c:c4:7a:3a:c5:b6"
+ power:
+ type: ipmi
+ address: 192.168.42.72
+ user: root
+ pass: root
+ driver: LAN_2_0
+
+ - name: node2-compute
+ tags: compute
+ architecture: amd64/generic
+ mac_addresses:
+ - "0c:c4:7a:3a:b2:ae"
+ power:
+ type: ipmi
+ address: 192.168.42.40
+ user: root
+ pass: root
+ driver: LAN_2_0
+
+ - name: node3-control
+ tags: control
+ architecture: amd64/generic
+ mac_addresses:
+ - "0c:c4:7a:1f:6f:c0"
+ power:
+ type: ipmi
+ address: 192.168.42.33
+ user: root
+ pass: root
+ driver: LAN_2_0
+
+ - name: node4-control
+ tags: control
+ architecture: amd64/generic
+ mac_addresses:
+ - "0c:c4:7a:31:9d:bc"
+ power:
+ type: ipmi
+ address: 192.168.42.6
+ user: root
+ pass: root
+ driver: LAN_2_0
+
+ - name: node5-control
+ tags: control
+ architecture: amd64/generic
+ mac_addresses:
+ - "00:25:90:fd:2e:48"
+ power:
+ type: ipmi
+ address: 192.168.42.35
+ user: root
+ pass: root
+ driver: LAN_2_0
+
+
+# - name: jenkins-slave
+# tags: jenkins-slave
+# architecture: amd64/generic
+# mac_addresses:
+# - "52:54:00:f0:5c:53"
+# power:
+# type: virsh
+# address: qemu+ssh://ubuntu@10.4.1.1/system
+
+ # Contains the virtual machine parameters for creating the Juju bootstrap
+ # node virtual machine
+ juju-bootstrap:
+ name: bootstrap
+ interfaces: ['bridge=brAdm,model=virtio','bridge=brPublic,model=virtio']
+ memory: 4096
+ vcpus: 4
+ arch: amd64
+ pool: default
+ disk_size: 120G
diff --git a/ci/maas/cengn_lynx/pod1/environments.yaml b/ci/maas/cengn_lynx/pod1/environments.yaml
new file mode 100644
index 00000000..e1b18695
--- /dev/null
+++ b/ci/maas/cengn_lynx/pod1/environments.yaml
@@ -0,0 +1,40 @@
+default: cengn-lynx-pod1
+
+environments:
+
+ # https://juju.ubuntu.com/docs/config-maas.html
+ cengn-lynx-pod1:
+ type: maas
+
+ # maas-server specifies the location of the MAAS server. It must
+ # specify the base path.
+ #
+ maas-server: 'http://10.120.0.3:80/MAAS'
+
+ # maas-oauth holds the OAuth credentials from MAAS.
+ #
+ maas-oauth: '2RqvWSuUgT6EM9JDZT:QDMascKSWm67p92D6s:VZBhsHPUJs9TD4VPHqTzLrTqT3zPGya4'
+
+ # maas-server bootstrap ssh connection options
+ #
+
+ # bootstrap-timeout time to wait contacting a state server, in seconds.
+ bootstrap-timeout: 1800
+
+ # Whether or not to refresh the list of available updates for an
+ # OS. The default option of true is recommended for use in
+ # production systems, but disabling this can speed up local
+ # deployments for development or testing.
+ #
+ enable-os-refresh-update: false
+
+ # Whether or not to perform OS upgrades when machines are
+ # provisioned. The default option of true is recommended for use
+ # in production systems, but disabling this can speed up local
+ # deployments for development or testing.
+ #
+ enable-os-upgrade: false
+
+
+ admin-secret: admin
+ default-series: trusty