enabling Intel podp for EMC scalio

Change-Id: Id992dc064179eb2a2256f08555aeb34acac98522
Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>

1 files changed, 211 insertions, 0 deletions

diff --git a/ci/maas/intel/pod9/deployment.yaml b/ci/maas/intel/pod9/deployment.yaml
new file mode 100755
index 00000000..4b03abd0
--- /dev/null
+++ b/ci/maas/intel/pod9/deployment.yaml
@@ -0,0 +1,211 @@
+# This file defines the deployment for the MAAS environment which is to be
+# deployed and automated.
+demo-maas:
+    maas:
+        # Defines the general setup for the MAAS environment, including the
+        # username and password for the host as well as the MAAS server.
+        user: ubuntu
+        password: ubuntu
+
+        # Contains the virtual machine parameters for creating the MAAS virtual
+        # server. Here you can configure the name of the virsh domain, the
+        # parameters for how the network is attached.
+        name: opnfv-maas-intel
+        interfaces: ['bridge=brAdm,model=virtio', 'bridge=brData,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio']
+        memory: 4096
+        vcpus: 4
+        arch: amd64
+        pool: default
+        disk_size: 160G
+
+        # Apt http proxy setting(s)
+        apt_http_proxy:
+
+        apt_sources:
+          - ppa:maas/stable
+          - ppa:juju/stable
+
+        # Virsh power settings
+        # Specifies the uri and keys to use for virsh power control of the 
+        # juju virtual machine. If the uri is omitted, the value for the
+        # --remote is used. If no power settings are desired, then do not
+        # supply the virsh block.
+        virsh:
+            rsa_priv_key: /home/ubuntu/.ssh/id_rsa
+            rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
+            uri: qemu+ssh://jenkins@10.9.1.1/system
+
+        # Defines the IP Address that the configuration script will use to
+        # to access the MAAS controller via SSH.
+        ip_address: 10.9.1.2
+
+        # This section allows the user to set a series of options on the
+        # MAAS server itself. The list of config options can be found in
+        # the upstream MAAS documentation:
+        #  - http://maas.ubuntu.com/docs/api.html#maas-server
+        settings:
+            main_archive: http://us.archive.ubuntu.com/ubuntu
+            upstream_dns: 8.8.8.8
+            maas_name: intelpod9
+            # kernel_opts: "console=tty0 console=ttyS1,115200n8"
+            # ntp_server: ntp.ubuntu.com
+
+        # This section is used to define the networking parameters for when
+        # the node first comes up. It is fed into the meta-data cloud-init
+        # configuration and is used to configure the networking piece of the
+        # service. The contents of this section are written directly to the
+        # /etc/network/interfaces file.
+        #
+        # Please note, this is slightly different than the
+        # node-group-interfaces section below. This will configure the
+        # machine's networking params, and the node-group-interfaces will
+        # configure the maas node-group interfaces which is used for
+        # controlling the dhcp, dns, etc.
+        network_config: |
+            auto lo
+            iface lo inet loopback
+
+            auto eth0
+            iface eth0 inet static
+            address 10.9.1.2
+            netmask 255.255.255.0
+            network 10.9.1.0
+            broadcast 10.9.1.255
+            gateway 10.9.1.1
+            dns-nameservers 8.8.8.8 10.9.1.2 127.0.0.1
+
+            auto eth1
+            iface eth1 inet static
+            address 10.9.12.2
+            netmask 255.255.255.0
+
+            auto eth2
+            iface eth2 inet static
+            address 10.9.15.2
+            netmask 255.255.255.0
+
+            auto eth3
+            iface eth3 inet static
+            address 10.2.117.143
+            netmask 255.255.255.0
+            #auto lo
+            #iface lo inet loopback
+
+            #auto eth0
+            #iface eth0 inet static
+            #  address 192.168.122.2
+            #  netmask 255.255.248.0
+            #  network 192.168.122.0
+            #  broadcast 192.168.122.255
+            #  gateway 192.168.122.1
+            #  dns-nameservers 192.168.122.1 127.0.0.1
+
+        # The node-group-interfaces section is used to configure the MAAS
+        # network interfaces. Basic configuration is supported, such as which
+        # device should be bound, the range of IP addresses, etc.
+        # Note: this may contain the special identifiers:
+        #   ${maas_net} - the first 3 octets of the ipv4 address
+        #   ${maas_ip} - the ip address of the MAAS controller 
+        node_group_ifaces:
+            - device: eth0
+              ip: 10.9.1.2
+              subnet_mask: 255.255.255.0
+              broadcast_ip: 10.9.1.255
+              router_ip: 10.9.1.1
+              static_range:
+                  low: 10.9.1.50
+                  high: 10.9.1.80
+              dynamic_range:
+                  low: 10.9.1.81
+                  high: 10.9.1.250
+            - device: eth1
+              ip: 10.9.12.2
+              subnet_mask: 255.255.255.0
+              broadcast_ip: 10.9.12.255
+              management: 1
+              static_range:
+                  low: 10.9.12.20
+                  high: 10.9.12.150
+              dynamic_range:
+                  low: 10.9.12.151
+                  high: 10.9.12.200
+            - device: eth2
+              ip: 10.9.15.2
+              subnet_mask: 255.255.255.0
+              broadcast_ip: 10.9.15.255
+              router_ip: 10.9.15.254
+              management: 1
+              static_range:
+                  low: 10.9.15.20
+                  high: 10.9.15.150
+              dynamic_range:
+                  low: 10.9.15.151
+                  high: 10.9.15.200
+
+        # Defines the physical nodes which are added to the MAAS cluster
+        # controller upon startup of the node.
+        nodes:
+            - name: node1-control
+              tags: control
+              architecture: amd64/generic
+              mac_addresses:
+                  - "00:1E:67:D4:30:38"
+              power:
+                  type: ipmi
+                  address: 10.2.117.142
+                  user: root
+                  pass: root
+                  driver: LAN_2_0
+#              sticky_ip_address:
+#                  mac_address: "38:63:bb:43:b8:9c"
+#                  requested_address: 192.168.122.5
+
+            - name: node4-compute
+              tags: compute
+              architecture: amd64/generic
+              mac_addresses:
+                  - "00:1E:67:D4:33:A2"
+              power:
+                  type: ipmi
+                  address: 10.2.117.144
+                  user: root
+                  pass: root
+                  driver: LAN_2_0
+#              sticky_ip_address:
+#                  mac_address: "38:63:bb:43:b8:9c"
+#                  requested_address: 192.168.122.5
+
+            - name: node5-compute
+              tags: compute
+              architecture: amd64/generic
+              mac_addresses:
+                  - "00:1E:67:D4:2F:BA"
+              power:
+                  type: ipmi
+                  address: 10.2.117.146
+                  user: root
+                  pass: root
+                  driver: LAN_2_0
+#              sticky_ip_address:
+#                  mac_address: "38:63:bb:43:b8:9c"
+#                  requested_address: 192.168.122.5
+
+#            - name: jenkins-slave
+#              tags: jenkins-slave
+#              architecture: amd64/generic
+#              mac_addresses:
+#                  - "52:54:00:f0:5c:53"
+#              power:
+#                  type: virsh
+#                  address: qemu+ssh://ubuntu@10.4.1.1/system
+
+    # Contains the virtual machine parameters for creating the Juju bootstrap
+    # node virtual machine
+    juju-bootstrap:
+        name: bootstrap
+        interfaces: ['bridge=brAdm,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio']
+        memory: 4096
+        vcpus: 4
+        arch: amd64
+        pool: default
+        disk_size: 120G