diff options
Diffstat (limited to 'fuel/prototypes/auto-deploy/examples')
21 files changed, 0 insertions, 2939 deletions
diff --git a/fuel/prototypes/auto-deploy/examples/ipmi/README.txt b/fuel/prototypes/auto-deploy/examples/ipmi/README.txt deleted file mode 100644 index 2cbffa9..0000000 --- a/fuel/prototypes/auto-deploy/examples/ipmi/README.txt +++ /dev/null @@ -1,10 +0,0 @@ -This is a hybrid IPMI DHA, where the Fuel master is run as a KVM -VM, but all other nodes are real iron under IPMI control. - -In "conf" is an example dea.yaml, dha.yaml and a VM definition for the -Fuel master. You need to tune these so they match your specific -environment. In addition you need to create a bridge from the VM to -the admin (PXE) network of the physical nodes. An example snippet for -/etc/network/interfaces which also configures NAT can be found in the -README.txt in conf. - diff --git a/fuel/prototypes/auto-deploy/examples/ipmi/conf/README.txt b/fuel/prototypes/auto-deploy/examples/ipmi/conf/README.txt deleted file mode 100644 index a8608dc..0000000 --- a/fuel/prototypes/auto-deploy/examples/ipmi/conf/README.txt +++ /dev/null @@ -1,12 +0,0 @@ -Add this snippet into /etc/network/interfaces after making sure to -replace p1p1.20 with your actual outbound interface in order to -provide network access to the Fuel master for DNS and NTP. - -iface vfuelnet inet static - bridge_ports em1 - address 10.30.0.1 - netmask 255.255.255.0 - pre-down iptables -t nat -D POSTROUTING --out-interface p1p1.20 -j MASQUERADE -m comment --comment "vfuelnet" - pre-down iptables -D FORWARD --in-interface vfuelnet --out-interface p1p1.20 -m comment --comment "vfuelnet" - post-up iptables -t nat -A POSTROUTING --out-interface p1p1.20 -j MASQUERADE -m comment --comment "vfuelnet" - post-up iptables -A FORWARD --in-interface vfuelnet --out-interface p1p1.20 -m comment --comment "vfuelnet" diff --git a/fuel/prototypes/auto-deploy/examples/ipmi/conf/dea.yaml b/fuel/prototypes/auto-deploy/examples/ipmi/conf/dea.yaml deleted file mode 100644 index 166b68a..0000000 --- a/fuel/prototypes/auto-deploy/examples/ipmi/conf/dea.yaml +++ /dev/null @@ -1,983 +0,0 @@ -title: Deployment Environment Adapter (DEA) -# DEA API version supported -version: 1.1 -created: Tue May 5 15:33:07 UTC 2015 -comment: Test environment Ericsson Montreal -nodes: -- id: 1 - interfaces: - eth0: - - fuelweb_admin - eth2: - - public - - management - - storage - - private - role: controller -- id: 2 - interfaces: - eth0: - - fuelweb_admin - eth2: - - public - - management - - storage - - private - role: compute -environment_mode: multinode -environment_name: Stefan3_auto -fuel: - ADMIN_NETWORK: - dhcp_pool_end: 10.30.0.254 - dhcp_pool_start: 10.30.0.3 - ipaddress: 10.30.0.2 - netmask: 255.255.255.0 - DNS_DOMAIN: opnfvericsson.ca - DNS_SEARCH: opnfvericsson.ca - DNS_UPSTREAM: 10.118.32.193 - FUEL_ACCESS: - password: admin - user: admin - HOSTNAME: mrberg-fuel - NTP1: 0.ca.pool.ntp.org - NTP2: 1.ca.pool.ntp.org - NTP3: 2.ca.pool.ntp.org -controller: -- action: add-br - name: br-eth0 -- action: add-port - bridge: br-eth0 - name: eth0 -- action: add-br - name: br-eth1 -- action: add-port - bridge: br-eth1 - name: eth1 -- action: add-br - name: br-eth2 -- action: add-port - bridge: br-eth2 - name: eth2 -- action: add-br - name: br-eth3 -- action: add-port - bridge: br-eth3 - name: eth3 -- action: add-br - name: br-eth4 -- action: add-port - bridge: br-eth4 - name: eth4 -- action: add-br - name: br-eth5 -- action: add-port - bridge: br-eth5 - name: eth5 -- action: add-br - name: br-ex -- action: add-br - name: br-mgmt -- action: add-br - name: br-storage -- action: add-br - name: br-fw-admin -- action: add-patch - bridges: - - br-eth2 - - br-storage - tags: - - 220 - - 0 - vlan_ids: - - 220 - - 0 -- action: add-patch - bridges: - - br-eth2 - - br-mgmt - tags: - - 320 - - 0 - vlan_ids: - - 320 - - 0 -- action: add-patch - bridges: - - br-eth0 - - br-fw-admin - trunks: - - 0 -- action: add-patch - bridges: - - br-eth2 - - br-ex - tags: - - 120 - - 0 - vlan_ids: - - 120 - - 0 -- action: add-br - name: br-prv -- action: add-patch - bridges: - - br-eth2 - - br-prv -compute: -- action: add-br - name: br-eth0 -- action: add-port - bridge: br-eth0 - name: eth0 -- action: add-br - name: br-eth1 -- action: add-port - bridge: br-eth1 - name: eth1 -- action: add-br - name: br-eth2 -- action: add-port - bridge: br-eth2 - name: eth2 -- action: add-br - name: br-eth3 -- action: add-port - bridge: br-eth3 - name: eth3 -- action: add-br - name: br-eth4 -- action: add-port - bridge: br-eth4 - name: eth4 -- action: add-br - name: br-eth5 -- action: add-port - bridge: br-eth5 - name: eth5 -- action: add-br - name: br-mgmt -- action: add-br - name: br-storage -- action: add-br - name: br-fw-admin -- action: add-patch - bridges: - - br-eth2 - - br-storage - tags: - - 220 - - 0 - vlan_ids: - - 220 - - 0 -- action: add-patch - bridges: - - br-eth2 - - br-mgmt - tags: - - 320 - - 0 - vlan_ids: - - 320 - - 0 -- action: add-patch - bridges: - - br-eth0 - - br-fw-admin - trunks: - - 0 -- action: add-br - name: br-prv -- action: add-patch - bridges: - - br-eth2 - - br-prv -opnfv: - compute: {} - controller: {} -network: - networking_parameters: - base_mac: fa:16:3e:00:00:00 - dns_nameservers: - - 10.118.32.193 - - 8.8.8.8 - floating_ranges: - - - 172.16.0.130 - - 172.16.0.254 - gre_id_range: - - 2 - - 65535 - internal_cidr: 192.168.111.0/24 - internal_gateway: 192.168.111.1 - net_l23_provider: ovs - segmentation_type: vlan - vlan_range: - - 2022 - - 2023 - networks: - - cidr: 172.16.0.0/24 - gateway: 172.16.0.1 - ip_ranges: - - - 172.16.0.2 - - 172.16.0.126 - meta: - assign_vip: true - cidr: 172.16.0.0/24 - configurable: true - floating_range_var: floating_ranges - ip_range: - - 172.16.0.2 - - 172.16.0.126 - map_priority: 1 - name: public - notation: ip_ranges - render_addr_mask: public - render_type: null - use_gateway: true - vlan_start: null - name: public - vlan_start: 120 - - cidr: 192.168.0.0/24 - gateway: null - ip_ranges: - - - 192.168.0.2 - - 192.168.0.254 - meta: - assign_vip: true - cidr: 192.168.0.0/24 - configurable: true - map_priority: 2 - name: management - notation: cidr - render_addr_mask: internal - render_type: cidr - use_gateway: false - vlan_start: 101 - name: management - vlan_start: 320 - - cidr: 192.168.1.0/24 - gateway: null - ip_ranges: - - - 192.168.1.2 - - 192.168.1.254 - meta: - assign_vip: false - cidr: 192.168.1.0/24 - configurable: true - map_priority: 2 - name: storage - notation: cidr - render_addr_mask: storage - render_type: cidr - use_gateway: false - vlan_start: 102 - name: storage - vlan_start: 220 - - cidr: null - gateway: null - ip_ranges: [] - meta: - assign_vip: false - configurable: false - map_priority: 2 - name: private - neutron_vlan_range: true - notation: null - render_addr_mask: null - render_type: null - seg_type: vlan - use_gateway: false - vlan_start: null - name: private - vlan_start: null - - cidr: 10.30.0.0/24 - gateway: null - ip_ranges: - - - 10.30.0.3 - - 10.30.0.254 - meta: - assign_vip: false - configurable: false - map_priority: 0 - notation: ip_ranges - render_addr_mask: null - render_type: null - unmovable: true - use_gateway: true - name: fuelweb_admin - vlan_start: null -settings: - editable: - access: - email: - description: Email address for Administrator - label: email - type: text - value: admin@localhost - weight: 40 - metadata: - label: Access - weight: 10 - password: - description: Password for Administrator - label: password - type: password - value: admin - weight: 20 - tenant: - description: Tenant (project) name for Administrator - label: tenant - regex: - error: Invalid tenant name - source: ^(?!services$)(?!nova$)(?!glance$)(?!keystone$)(?!neutron$)(?!cinder$)(?!swift$)(?!ceph$)(?![Gg]uest$).* - type: text - value: admin - weight: 30 - user: - description: Username for Administrator - label: username - regex: - error: Invalid username - source: ^(?!services$)(?!nova$)(?!glance$)(?!keystone$)(?!neutron$)(?!cinder$)(?!swift$)(?!ceph$)(?![Gg]uest$).* - type: text - value: admin - weight: 10 - additional_components: - ceilometer: - description: If selected, Ceilometer component will be installed - label: Install Ceilometer - type: checkbox - value: false - weight: 40 - heat: - description: '' - label: '' - type: hidden - value: true - weight: 30 - metadata: - label: Additional Components - weight: 20 - murano: - description: If selected, Murano component will be installed - label: Install Murano - restrictions: - - cluster:net_provider != 'neutron' - type: checkbox - value: false - weight: 20 - sahara: - description: If selected, Sahara component will be installed - label: Install Sahara - type: checkbox - value: false - weight: 10 - common: - auth_key: - description: Public key(s) to include in authorized_keys on deployed nodes - label: Public Key - type: text - value: '' - weight: 70 - auto_assign_floating_ip: - description: If selected, OpenStack will automatically assign a floating IP - to a new instance - label: Auto assign floating IP - restrictions: - - cluster:net_provider == 'neutron' - type: checkbox - value: false - weight: 40 - compute_scheduler_driver: - label: Scheduler driver - type: radio - value: nova.scheduler.filter_scheduler.FilterScheduler - values: - - data: nova.scheduler.filter_scheduler.FilterScheduler - description: Currently the most advanced OpenStack scheduler. See the OpenStack - documentation for details. - label: Filter scheduler - - data: nova.scheduler.simple.SimpleScheduler - description: This is 'naive' scheduler which tries to find the least loaded - host - label: Simple scheduler - weight: 40 - debug: - description: Debug logging mode provides more information, but requires more - disk space. - label: OpenStack debug logging - type: checkbox - value: false - weight: 20 - disable_offload: - description: If set, generic segmentation offload (gso) and generic receive - offload (gro) on physical nics will be disabled. See ethtool man. - label: Disable generic offload on physical nics - restrictions: - - action: hide - condition: cluster:net_provider == 'neutron' and networking_parameters:segmentation_type - == 'gre' - type: checkbox - value: true - weight: 80 - libvirt_type: - label: Hypervisor type - type: radio - value: kvm - values: - - data: kvm - description: Choose this type of hypervisor if you run OpenStack on hardware - label: KVM - restrictions: - - settings:common.libvirt_type.value == 'vcenter' - - data: qemu - description: Choose this type of hypervisor if you run OpenStack on virtual - hosts. - label: QEMU - restrictions: - - settings:common.libvirt_type.value == 'vcenter' - - data: vcenter - description: Choose this type of hypervisor if you run OpenStack in a vCenter - environment. - label: vCenter - restrictions: - - settings:common.libvirt_type.value != 'vcenter' or cluster:net_provider - == 'neutron' - weight: 30 - metadata: - label: Common - weight: 30 - nova_quota: - description: Quotas are used to limit CPU and memory usage for tenants. Enabling - quotas will increase load on the Nova database. - label: Nova quotas - type: checkbox - value: false - weight: 25 - resume_guests_state_on_host_boot: - description: Whether to resume previous guests state when the host reboots. - If enabled, this option causes guests assigned to the host to resume their - previous state. If the guest was running a restart will be attempted when - nova-compute starts. If the guest was not running previously, a restart - will not be attempted. - label: Resume guests state on host boot - type: checkbox - value: true - weight: 60 - use_cow_images: - description: For most cases you will want qcow format. If it's disabled, raw - image format will be used to run VMs. OpenStack with raw format currently - does not support snapshotting. - label: Use qcow format for images - type: checkbox - value: true - weight: 50 - corosync: - group: - description: '' - label: Group - type: text - value: 226.94.1.1 - weight: 10 - metadata: - label: Corosync - restrictions: - - action: hide - condition: 'true' - weight: 50 - port: - description: '' - label: Port - type: text - value: '12000' - weight: 20 - verified: - description: Set True only if multicast is configured correctly on router. - label: Need to pass network verification. - type: checkbox - value: false - weight: 10 - external_dns: - dns_list: - description: List of upstream DNS servers, separated by comma - label: DNS list - type: text - value: 10.118.32.193, 8.8.8.8 - weight: 10 - metadata: - label: Upstream DNS - weight: 90 - external_ntp: - metadata: - label: Upstream NTP - weight: 100 - ntp_list: - description: List of upstream NTP servers, separated by comma - label: NTP servers list - type: text - value: 0.pool.ntp.org, 1.pool.ntp.org - weight: 10 - kernel_params: - kernel: - description: Default kernel parameters - label: Initial parameters - type: text - value: console=ttyS0,9600 console=tty0 rootdelay=90 nomodeset - weight: 45 - metadata: - label: Kernel parameters - weight: 40 - neutron_mellanox: - metadata: - enabled: true - label: Mellanox Neutron components - toggleable: false - weight: 50 - plugin: - label: Mellanox drivers and SR-IOV plugin - type: radio - value: disabled - values: - - data: disabled - description: If selected, Mellanox drivers, Neutron and Cinder plugin will - not be installed. - label: Mellanox drivers and plugins disabled - restrictions: - - settings:storage.iser.value == true - - data: drivers_only - description: If selected, Mellanox Ethernet drivers will be installed to - support networking over Mellanox NIC. Mellanox Neutron plugin will not - be installed. - label: Install only Mellanox drivers - restrictions: - - settings:common.libvirt_type.value != 'kvm' - - data: ethernet - description: If selected, both Mellanox Ethernet drivers and Mellanox network - acceleration (Neutron) plugin will be installed. - label: Install Mellanox drivers and SR-IOV plugin - restrictions: - - settings:common.libvirt_type.value != 'kvm' or not (cluster:net_provider - == 'neutron' and networking_parameters:segmentation_type == 'vlan') - weight: 60 - vf_num: - description: Note that one virtual function will be reserved to the storage - network, in case of choosing iSER. - label: Number of virtual NICs - restrictions: - - settings:neutron_mellanox.plugin.value != 'ethernet' - type: text - value: '16' - weight: 70 - nsx_plugin: - connector_type: - description: Default network transport type to use - label: NSX connector type - type: select - value: stt - values: - - data: gre - label: GRE - - data: ipsec_gre - label: GRE over IPSec - - data: stt - label: STT - - data: ipsec_stt - label: STT over IPSec - - data: bridge - label: Bridge - weight: 80 - l3_gw_service_uuid: - description: UUID for the default L3 gateway service to use with this cluster - label: L3 service UUID - regex: - error: Invalid L3 gateway service UUID - source: '[a-f\d]{8}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{12}' - type: text - value: '' - weight: 50 - metadata: - enabled: false - label: VMware NSX - restrictions: - - action: hide - condition: cluster:net_provider != 'neutron' or networking_parameters:net_l23_provider - != 'nsx' - weight: 20 - nsx_controllers: - description: One or more IPv4[:port] addresses of NSX controller node, separated - by comma (e.g. 10.30.30.2,192.168.110.254:443) - label: NSX controller endpoint - regex: - error: Invalid controller endpoints, specify valid IPv4[:port] pair - source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?(,(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?)*$ - type: text - value: '' - weight: 60 - nsx_password: - description: Password for Administrator - label: NSX password - regex: - error: Empty password - source: \S - type: password - value: '' - weight: 30 - nsx_username: - description: NSX administrator's username - label: NSX username - regex: - error: Empty username - source: \S - type: text - value: admin - weight: 20 - packages_url: - description: URL to NSX specific packages - label: URL to NSX bits - regex: - error: Invalid URL, specify valid HTTP/HTTPS URL with IPv4 address (e.g. - http://10.20.0.2/nsx) - source: ^https?://(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?(/.*)?$ - type: text - value: '' - weight: 70 - replication_mode: - description: '' - label: NSX cluster has Service nodes - type: checkbox - value: true - weight: 90 - transport_zone_uuid: - description: UUID of the pre-existing default NSX Transport zone - label: Transport zone UUID - regex: - error: Invalid transport zone UUID - source: '[a-f\d]{8}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{12}' - type: text - value: '' - weight: 40 - provision: - metadata: - label: Provision - restrictions: - - action: hide - condition: not ('experimental' in version:feature_groups) - weight: 80 - method: - description: Which provision method to use for this cluster. - label: Provision method - type: radio - value: cobbler - values: - - data: image - description: Copying pre-built images on a disk. - label: Image - - data: cobbler - description: Install from scratch using anaconda or debian-installer. - label: Classic (use anaconda or debian-installer) - public_network_assignment: - assign_to_all_nodes: - description: When disabled, public network will be assigned to controllers - and zabbix-server only - label: Assign public network to all nodes - type: checkbox - value: false - weight: 10 - metadata: - label: Public network assignment - restrictions: - - action: hide - condition: cluster:net_provider != 'neutron' - weight: 50 - storage: - ephemeral_ceph: - description: Configures Nova to store ephemeral volumes in RBD. This works - best if Ceph is enabled for volumes and images, too. Enables live migration - of all types of Ceph backed VMs (without this option, live migration will - only work with VMs launched from Cinder volumes). - label: Ceph RBD for ephemeral volumes (Nova) - restrictions: - - settings:common.libvirt_type.value == 'vcenter' - type: checkbox - value: false - weight: 75 - images_ceph: - description: Configures Glance to use the Ceph RBD backend to store images. - If enabled, this option will prevent Swift from installing. - label: Ceph RBD for images (Glance) - type: checkbox - value: false - weight: 30 - images_vcenter: - description: Configures Glance to use the vCenter/ESXi backend to store images. - If enabled, this option will prevent Swift from installing. - label: VMWare vCenter/ESXi datastore for images (Glance) - restrictions: - - settings:common.libvirt_type.value != 'vcenter' - type: checkbox - value: false - weight: 35 - iser: - description: 'High performance block storage: Cinder volumes over iSER protocol - (iSCSI over RDMA). This feature requires SR-IOV capabilities in the NIC, - and will use a dedicated virtual function for the storage network.' - label: iSER protocol for volumes (Cinder) - restrictions: - - settings:storage.volumes_lvm.value != true or settings:common.libvirt_type.value - != 'kvm' - type: checkbox - value: false - weight: 11 - metadata: - label: Storage - weight: 60 - objects_ceph: - description: Configures RadosGW front end for Ceph RBD. This exposes S3 and - Swift API Interfaces. If enabled, this option will prevent Swift from installing. - label: Ceph RadosGW for objects (Swift API) - restrictions: - - settings:storage.images_ceph.value == false - type: checkbox - value: false - weight: 80 - osd_pool_size: - description: Configures the default number of object replicas in Ceph. This - number must be equal to or lower than the number of deployed 'Storage - - Ceph OSD' nodes. - label: Ceph object replication factor - regex: - error: Invalid number - source: ^[1-9]\d*$ - restrictions: - - settings:common.libvirt_type.value == 'vcenter' - type: text - value: '2' - weight: 85 - vc_datacenter: - description: Inventory path to a datacenter. If you want to use ESXi host - as datastore, it should be "ha-datacenter". - label: Datacenter name - regex: - error: Empty datacenter - source: \S - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: text - value: '' - weight: 65 - vc_datastore: - description: Datastore associated with the datacenter. - label: Datastore name - regex: - error: Empty datastore - source: \S - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: text - value: '' - weight: 60 - vc_host: - description: IP Address of vCenter/ESXi - label: vCenter/ESXi IP - regex: - error: Specify valid IPv4 address - source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])$ - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: text - value: '' - weight: 45 - vc_image_dir: - description: The name of the directory where the glance images will be stored - in the VMware datastore. - label: Datastore Images directory - regex: - error: Empty images directory - source: \S - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: text - value: /openstack_glance - weight: 70 - vc_password: - description: vCenter/ESXi admin password - label: Password - regex: - error: Empty password - source: \S - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: password - value: '' - weight: 55 - vc_user: - description: vCenter/ESXi admin username - label: Username - regex: - error: Empty username - source: \S - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: text - value: '' - weight: 50 - volumes_ceph: - description: Configures Cinder to store volumes in Ceph RBD images. - label: Ceph RBD for volumes (Cinder) - restrictions: - - settings:storage.volumes_lvm.value == true or settings:common.libvirt_type.value - == 'vcenter' - type: checkbox - value: false - weight: 20 - volumes_lvm: - description: Requires at least one Storage - Cinder LVM node. - label: Cinder LVM over iSCSI for volumes - restrictions: - - settings:storage.volumes_ceph.value == true - type: checkbox - value: false - weight: 10 - volumes_vmdk: - description: Configures Cinder to store volumes via VMware vCenter. - label: VMware vCenter for volumes (Cinder) - restrictions: - - settings:common.libvirt_type.value != 'vcenter' or settings:storage.volumes_lvm.value - == true - type: checkbox - value: false - weight: 15 - syslog: - metadata: - label: Syslog - weight: 50 - syslog_port: - description: Remote syslog port - label: Port - regex: - error: Invalid Syslog port - source: ^([1-9][0-9]{0,3}|[1-5][0-9]{4}|6[0-4][0-9]{3}|65[0-4][0-9]{2}|655[0-2][0-9]|6553[0-5])$ - type: text - value: '514' - weight: 20 - syslog_server: - description: Remote syslog hostname - label: Hostname - type: text - value: '' - weight: 10 - syslog_transport: - label: Syslog transport protocol - type: radio - value: tcp - values: - - data: udp - description: '' - label: UDP - - data: tcp - description: '' - label: TCP - weight: 30 - vcenter: - cluster: - description: vCenter cluster name. If you have multiple clusters, use comma - to separate names - label: Cluster - regex: - error: Invalid cluster list - source: ^([^,\ ]+([\ ]*[^,\ ])*)(,[^,\ ]+([\ ]*[^,\ ])*)*$ - type: text - value: '' - weight: 40 - datastore_regex: - description: The Datastore regexp setting specifies the data stores to use - with Compute. For example, "nas.*". If you want to use all available datastores, - leave this field blank - label: Datastore regexp - regex: - error: Invalid datastore regexp - source: ^(\S.*\S|\S|)$ - type: text - value: '' - weight: 50 - host_ip: - description: IP Address of vCenter - label: vCenter IP - regex: - error: Specify valid IPv4 address - source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])$ - type: text - value: '' - weight: 10 - metadata: - label: vCenter - restrictions: - - action: hide - condition: settings:common.libvirt_type.value != 'vcenter' - weight: 20 - use_vcenter: - description: '' - label: '' - type: hidden - value: true - weight: 5 - vc_password: - description: vCenter admin password - label: Password - regex: - error: Empty password - source: \S - type: password - value: admin - weight: 30 - vc_user: - description: vCenter admin username - label: Username - regex: - error: Empty username - source: \S - type: text - value: admin - weight: 20 - vlan_interface: - description: Physical ESXi host ethernet adapter for VLAN networking (e.g. - vmnic1). If empty "vmnic0" is used by default - label: ESXi VLAN interface - restrictions: - - action: hide - condition: cluster:net_provider != 'nova_network' or networking_parameters:net_manager - != 'VlanManager' - type: text - value: '' - weight: 60 - zabbix: - metadata: - label: Zabbix Access - restrictions: - - action: hide - condition: not ('experimental' in version:feature_groups) - weight: 70 - password: - description: Password for Zabbix Administrator - label: password - type: password - value: zabbix - weight: 20 - username: - description: Username for Zabbix Administrator - label: username - type: text - value: admin - weight: 10 diff --git a/fuel/prototypes/auto-deploy/examples/ipmi/conf/dha.yaml b/fuel/prototypes/auto-deploy/examples/ipmi/conf/dha.yaml deleted file mode 100644 index 97629b7..0000000 --- a/fuel/prototypes/auto-deploy/examples/ipmi/conf/dha.yaml +++ /dev/null @@ -1,52 +0,0 @@ -title: Deployment Hardware Adapter (DHA) -# DHA API version supported -version: 1.1 -created: Mon May 4 09:03:46 UTC 2015 -comment: Test environment Ericsson Montreal - -# Adapter to use for this definition -adapter: ipmi - -# Node list. -# Mandatory properties are id and role. -# The MAC address of the PXE boot interface for Fuel is not -# mandatory to be defined. -# All other properties are adapter specific. - -nodes: -- id: 1 - pxeMac: 14:58:D0:55:E2:E0 - ipmiIp: 10.118.32.202 - ipmiUser: username - ipmiPass: password -- id: 2 - pxeMac: 9C:B6:54:8A:25:C0 - ipmiIp: 10.118.32.213 - ipmiUser: username - ipmiPass: password -# Adding the Fuel node as node id 3 which may not be correct - please -# adjust as needed. -- id: 3 - pxeMac: 52:54:00:bd:e4:21 - libvirtName: vFuel - isFuel: yes - -# Deployment power on strategy -# all: Turn on all nodes at once. There will be no correlation -# between the DHA and DEA node numbering. MAC addresses -# will be used to select the node roles though. -# sequence: Turn on the nodes in sequence starting with the lowest order -# node and wait for the node to be detected by Fuel. Not until -# the node has been detected and assigned a role will the next -# node be turned on. -powerOnStrategy: sequence - -# If fuelCustomInstall is set to true, Fuel is assumed to be installed by -# calling the DHA adapter function "dha_fuelCustomInstall()" with two -# arguments: node ID and the ISO file name to deploy. The custom install -# function is then to handle all necessary logic to boot the Fuel master -# from the ISO and then return. -# Allowed values: true, false - -fuelCustomInstall: true - diff --git a/fuel/prototypes/auto-deploy/examples/ipmi/conf/vm/vFuel b/fuel/prototypes/auto-deploy/examples/ipmi/conf/vm/vFuel deleted file mode 100644 index 2186539..0000000 --- a/fuel/prototypes/auto-deploy/examples/ipmi/conf/vm/vFuel +++ /dev/null @@ -1,115 +0,0 @@ -<domain type='kvm'> - <name>vFuel</name> - <uuid>daf21ecf-0dfe-4937-a155-8edde4f3ea76</uuid> - <memory unit='KiB'>8290304</memory> - <currentMemory unit='KiB'>8290304</currentMemory> - <vcpu placement='static'>2</vcpu> - <resource> - <partition>/machine</partition> - </resource> - <os> - <type arch='x86_64' machine='pc-i440fx-utopic'>hvm</type> - <boot dev='hd'/> - <boot dev='cdrom'/> - <bootmenu enable='no'/> - </os> - <features> - <acpi/> - <apic/> - <pae/> - </features> - <cpu mode='custom' match='exact'> - <model fallback='allow'>SandyBridge</model> - </cpu> - <clock offset='utc'> - <timer name='rtc' tickpolicy='catchup'/> - <timer name='pit' tickpolicy='delay'/> - <timer name='hpet' present='no'/> - </clock> - <on_poweroff>destroy</on_poweroff> - <on_reboot>restart</on_reboot> - <on_crash>restart</on_crash> - <pm> - <suspend-to-mem enabled='no'/> - <suspend-to-disk enabled='no'/> - </pm> - <devices> - <emulator>/usr/bin/kvm-spice</emulator> - <disk type='file' device='disk'> - <driver name='qemu' type='raw'/> - <source file='/mnt/images/vFuel.raw'/> - <target dev='vda' bus='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> - </disk> - <disk type='block' device='cdrom'> - <driver name='qemu' type='raw'/> - <source dev='/home/user/fueltmp/deploy-opnfv.iso'/> - <target dev='hda' bus='ide'/> - <readonly/> - <address type='drive' controller='0' bus='0' target='0' unit='0'/> - </disk> - <controller type='usb' index='0' model='ich9-ehci1'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x7'/> - </controller> - <controller type='usb' index='0' model='ich9-uhci1'> - <master startport='0'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0' multifunction='on'/> - </controller> - <controller type='usb' index='0' model='ich9-uhci2'> - <master startport='2'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x1'/> - </controller> - <controller type='usb' index='0' model='ich9-uhci3'> - <master startport='4'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x2'/> - </controller> - <controller type='pci' index='0' model='pci-root'/> - <controller type='virtio-serial' index='0'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> - </controller> - <controller type='ide' index='0'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> - </controller> - <interface type='bridge'> - <mac address='52:54:00:bd:e4:21'/> - <source bridge='vfuelnet'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> - </interface> - <serial type='pty'> - <target port='0'/> - </serial> - <console type='pty'> - <target type='serial' port='0'/> - </console> - <channel type='spicevmc'> - <target type='virtio' name='com.redhat.spice.0'/> - <address type='virtio-serial' controller='0' bus='0' port='1'/> - </channel> - <input type='mouse' bus='ps2'/> - <input type='keyboard' bus='ps2'/> - <graphics type='spice' autoport='yes' listen='127.0.0.1'> - <listen type='address' address='127.0.0.1'/> - </graphics> - <sound model='ich6'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> - </sound> - <video> - <model type='qxl' ram='65536' vram='65536' heads='1'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> - </video> - <redirdev bus='usb' type='spicevmc'> - </redirdev> - <redirdev bus='usb' type='spicevmc'> - </redirdev> - <redirdev bus='usb' type='spicevmc'> - </redirdev> - <redirdev bus='usb' type='spicevmc'> - </redirdev> - <memballoon model='virtio'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> - </memballoon> - </devices> - <seclabel type='dynamic' model='apparmor' relabel='yes'/> -</domain> - diff --git a/fuel/prototypes/auto-deploy/examples/ipmi/install-ubuntu-packages.sh b/fuel/prototypes/auto-deploy/examples/ipmi/install-ubuntu-packages.sh deleted file mode 100755 index 58ce19a..0000000 --- a/fuel/prototypes/auto-deploy/examples/ipmi/install-ubuntu-packages.sh +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/bash -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -# Tools for installation on the libvirt server/base host -# -apt-get install -y libvirt-bin qemu-kvm tightvncserver virt-manager \ - sshpass fuseiso genisoimage blackbox xterm -restart libvirt-bin diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/README.txt b/fuel/prototypes/auto-deploy/examples/libvirt/README.txt deleted file mode 100644 index 9cbfa54..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/README.txt +++ /dev/null @@ -1,25 +0,0 @@ -This is an example setup for the libvirt DHA adapter which will setup -four libvirt networks: - -fuel1: NATed network for management and admin -fuel2: Isolated network for storage -fuel3: Isolated network for private -fuel4: NATed network for public - -Four VMs will be created: - -fuel-master -controller1 -compute4 -compute5 - -Prerequisite: A Ubuntu 14.x host or later with sudo access. - -Start by installing the necessary Ubuntu packages by running -"sudo install_ubuntu_packages.sh". - -Then (re)generate the libvirt network and VM setup by running -"setup_vms.sh". - -You can then run deploy.sh with the corresponding dea.yaml and -dha.yaml which can be found in the conf subdirectory. diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/dea.yaml b/fuel/prototypes/auto-deploy/examples/libvirt/conf/dea.yaml deleted file mode 100644 index 5d2f55f..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/conf/dea.yaml +++ /dev/null @@ -1,975 +0,0 @@ -title: Deployment Environment Adapter (DEA) -# DEA API version supported -version: 1.1 -created: Sat Apr 25 16:26:22 UTC 2015 -comment: Small libvirt setup -nodes: -- id: 1 - interfaces: - eth0: - - fuelweb_admin - - management - eth1: - - storage - eth2: - - private - eth3: - - public - role: controller -- id: 2 - interfaces: - eth0: - - fuelweb_admin - - management - eth1: - - storage - eth2: - - private - eth3: - - public - role: compute -- id: 3 - interfaces: - eth0: - - fuelweb_admin - - management - eth1: - - storage - eth2: - - private - eth3: - - public - role: compute -environment_mode: multinode -environment_name: opnfv59-b -fuel: - ADMIN_NETWORK: - dhcp_pool_end: 10.20.0.254 - dhcp_pool_start: 10.20.0.3 - ipaddress: 10.20.0.2 - netmask: 255.255.255.0 - DNS_DOMAIN: domain.tld - DNS_SEARCH: domain.tld - DNS_UPSTREAM: 8.8.8.8 - FUEL_ACCESS: - password: admin - user: admin - HOSTNAME: opnfv59 - NTP1: 0.pool.ntp.org - NTP2: 1.pool.ntp.org - NTP3: 2.pool.ntp.org -controller: -- action: add-br - name: br-eth0 -- action: add-port - bridge: br-eth0 - name: eth0 -- action: add-br - name: br-eth1 -- action: add-port - bridge: br-eth1 - name: eth1 -- action: add-br - name: br-eth2 -- action: add-port - bridge: br-eth2 - name: eth2 -- action: add-br - name: br-eth3 -- action: add-port - bridge: br-eth3 - name: eth3 -- action: add-br - name: br-ex -- action: add-br - name: br-mgmt -- action: add-br - name: br-storage -- action: add-br - name: br-fw-admin -- action: add-patch - bridges: - - br-eth1 - - br-storage - tags: - - 102 - - 0 - vlan_ids: - - 102 - - 0 -- action: add-patch - bridges: - - br-eth0 - - br-mgmt - tags: - - 101 - - 0 - vlan_ids: - - 101 - - 0 -- action: add-patch - bridges: - - br-eth0 - - br-fw-admin - trunks: - - 0 -- action: add-patch - bridges: - - br-eth3 - - br-ex - trunks: - - 0 -- action: add-br - name: br-prv -- action: add-patch - bridges: - - br-eth2 - - br-prv -compute: -- action: add-br - name: br-eth0 -- action: add-port - bridge: br-eth0 - name: eth0 -- action: add-br - name: br-eth1 -- action: add-port - bridge: br-eth1 - name: eth1 -- action: add-br - name: br-eth2 -- action: add-port - bridge: br-eth2 - name: eth2 -- action: add-br - name: br-eth3 -- action: add-port - bridge: br-eth3 - name: eth3 -- action: add-br - name: br-mgmt -- action: add-br - name: br-storage -- action: add-br - name: br-fw-admin -- action: add-patch - bridges: - - br-eth1 - - br-storage - tags: - - 102 - - 0 - vlan_ids: - - 102 - - 0 -- action: add-patch - bridges: - - br-eth0 - - br-mgmt - tags: - - 101 - - 0 - vlan_ids: - - 101 - - 0 -- action: add-patch - bridges: - - br-eth0 - - br-fw-admin - trunks: - - 0 -- action: add-br - name: br-prv -- action: add-patch - bridges: - - br-eth2 - - br-prv -opnfv: - compute: {} - controller: {} -network: - networking_parameters: - base_mac: fa:16:3e:00:00:00 - dns_nameservers: - - 8.8.4.4 - - 8.8.8.8 - floating_ranges: - - - 172.16.0.130 - - 172.16.0.254 - gre_id_range: - - 2 - - 65535 - internal_cidr: 192.168.111.0/24 - internal_gateway: 192.168.111.1 - net_l23_provider: ovs - segmentation_type: vlan - vlan_range: - - 1000 - - 1030 - networks: - - cidr: 172.16.0.0/24 - gateway: 172.16.0.1 - ip_ranges: - - - 172.16.0.2 - - 172.16.0.126 - meta: - assign_vip: true - cidr: 172.16.0.0/24 - configurable: true - floating_range_var: floating_ranges - ip_range: - - 172.16.0.2 - - 172.16.0.126 - map_priority: 1 - name: public - notation: ip_ranges - render_addr_mask: public - render_type: null - use_gateway: true - vlan_start: null - name: public - vlan_start: null - - cidr: 192.168.0.0/24 - gateway: null - ip_ranges: - - - 192.168.0.1 - - 192.168.0.254 - meta: - assign_vip: true - cidr: 192.168.0.0/24 - configurable: true - map_priority: 2 - name: management - notation: cidr - render_addr_mask: internal - render_type: cidr - use_gateway: false - vlan_start: 101 - name: management - vlan_start: 101 - - cidr: 192.168.1.0/24 - gateway: null - ip_ranges: - - - 192.168.1.1 - - 192.168.1.254 - meta: - assign_vip: false - cidr: 192.168.1.0/24 - configurable: true - map_priority: 2 - name: storage - notation: cidr - render_addr_mask: storage - render_type: cidr - use_gateway: false - vlan_start: 102 - name: storage - vlan_start: 102 - - cidr: null - gateway: null - ip_ranges: [] - meta: - assign_vip: false - configurable: false - map_priority: 2 - name: private - neutron_vlan_range: true - notation: null - render_addr_mask: null - render_type: null - seg_type: vlan - use_gateway: false - vlan_start: null - name: private - vlan_start: null - - cidr: 10.20.0.0/24 - gateway: null - ip_ranges: - - - 10.20.0.3 - - 10.20.0.254 - meta: - assign_vip: false - configurable: false - map_priority: 0 - notation: ip_ranges - render_addr_mask: null - render_type: null - unmovable: true - use_gateway: true - name: fuelweb_admin - vlan_start: null -settings: - editable: - access: - email: - description: Email address for Administrator - label: email - type: text - value: admin@localhost - weight: 40 - metadata: - label: Access - weight: 10 - password: - description: Password for Administrator - label: password - type: password - value: admin - weight: 20 - tenant: - description: Tenant (project) name for Administrator - label: tenant - regex: - error: Invalid tenant name - source: ^(?!services$)(?!nova$)(?!glance$)(?!keystone$)(?!neutron$)(?!cinder$)(?!swift$)(?!ceph$)(?![Gg]uest$).* - type: text - value: admin - weight: 30 - user: - description: Username for Administrator - label: username - regex: - error: Invalid username - source: ^(?!services$)(?!nova$)(?!glance$)(?!keystone$)(?!neutron$)(?!cinder$)(?!swift$)(?!ceph$)(?![Gg]uest$).* - type: text - value: admin - weight: 10 - additional_components: - ceilometer: - description: If selected, Ceilometer component will be installed - label: Install Ceilometer - type: checkbox - value: false - weight: 40 - heat: - description: '' - label: '' - type: hidden - value: true - weight: 30 - metadata: - label: Additional Components - weight: 20 - murano: - description: If selected, Murano component will be installed - label: Install Murano - restrictions: - - cluster:net_provider != 'neutron' - type: checkbox - value: false - weight: 20 - sahara: - description: If selected, Sahara component will be installed - label: Install Sahara - type: checkbox - value: false - weight: 10 - common: - auth_key: - description: Public key(s) to include in authorized_keys on deployed nodes - label: Public Key - type: text - value: '' - weight: 70 - auto_assign_floating_ip: - description: If selected, OpenStack will automatically assign a floating IP - to a new instance - label: Auto assign floating IP - restrictions: - - cluster:net_provider == 'neutron' - type: checkbox - value: false - weight: 40 - compute_scheduler_driver: - label: Scheduler driver - type: radio - value: nova.scheduler.filter_scheduler.FilterScheduler - values: - - data: nova.scheduler.filter_scheduler.FilterScheduler - description: Currently the most advanced OpenStack scheduler. See the OpenStack - documentation for details. - label: Filter scheduler - - data: nova.scheduler.simple.SimpleScheduler - description: This is 'naive' scheduler which tries to find the least loaded - host - label: Simple scheduler - weight: 40 - debug: - description: Debug logging mode provides more information, but requires more - disk space. - label: OpenStack debug logging - type: checkbox - value: false - weight: 20 - disable_offload: - description: If set, generic segmentation offload (gso) and generic receive - offload (gro) on physical nics will be disabled. See ethtool man. - label: Disable generic offload on physical nics - restrictions: - - action: hide - condition: cluster:net_provider == 'neutron' and networking_parameters:segmentation_type - == 'gre' - type: checkbox - value: true - weight: 80 - libvirt_type: - label: Hypervisor type - type: radio - value: kvm - values: - - data: kvm - description: Choose this type of hypervisor if you run OpenStack on hardware - label: KVM - restrictions: - - settings:common.libvirt_type.value == 'vcenter' - - data: qemu - description: Choose this type of hypervisor if you run OpenStack on virtual - hosts. - label: QEMU - restrictions: - - settings:common.libvirt_type.value == 'vcenter' - - data: vcenter - description: Choose this type of hypervisor if you run OpenStack in a vCenter - environment. - label: vCenter - restrictions: - - settings:common.libvirt_type.value != 'vcenter' or cluster:net_provider - == 'neutron' - weight: 30 - metadata: - label: Common - weight: 30 - nova_quota: - description: Quotas are used to limit CPU and memory usage for tenants. Enabling - quotas will increase load on the Nova database. - label: Nova quotas - type: checkbox - value: false - weight: 25 - resume_guests_state_on_host_boot: - description: Whether to resume previous guests state when the host reboots. - If enabled, this option causes guests assigned to the host to resume their - previous state. If the guest was running a restart will be attempted when - nova-compute starts. If the guest was not running previously, a restart - will not be attempted. - label: Resume guests state on host boot - type: checkbox - value: true - weight: 60 - use_cow_images: - description: For most cases you will want qcow format. If it's disabled, raw - image format will be used to run VMs. OpenStack with raw format currently - does not support snapshotting. - label: Use qcow format for images - type: checkbox - value: true - weight: 50 - corosync: - group: - description: '' - label: Group - type: text - value: 226.94.1.1 - weight: 10 - metadata: - label: Corosync - restrictions: - - action: hide - condition: 'true' - weight: 50 - port: - description: '' - label: Port - type: text - value: '12000' - weight: 20 - verified: - description: Set True only if multicast is configured correctly on router. - label: Need to pass network verification. - type: checkbox - value: false - weight: 10 - external_dns: - dns_list: - description: List of upstream DNS servers, separated by comma - label: DNS list - type: text - value: 8.8.8.8, 8.8.4.4 - weight: 10 - metadata: - label: Upstream DNS - weight: 90 - external_ntp: - metadata: - label: Upstream NTP - weight: 100 - ntp_list: - description: List of upstream NTP servers, separated by comma - label: NTP servers list - type: text - value: 0.pool.ntp.org, 1.pool.ntp.org - weight: 10 - kernel_params: - kernel: - description: Default kernel parameters - label: Initial parameters - type: text - value: console=ttyS0,9600 console=tty0 rootdelay=90 nomodeset - weight: 45 - metadata: - label: Kernel parameters - weight: 40 - neutron_mellanox: - metadata: - enabled: true - label: Mellanox Neutron components - toggleable: false - weight: 50 - plugin: - label: Mellanox drivers and SR-IOV plugin - type: radio - value: disabled - values: - - data: disabled - description: If selected, Mellanox drivers, Neutron and Cinder plugin will - not be installed. - label: Mellanox drivers and plugins disabled - restrictions: - - settings:storage.iser.value == true - - data: drivers_only - description: If selected, Mellanox Ethernet drivers will be installed to - support networking over Mellanox NIC. Mellanox Neutron plugin will not - be installed. - label: Install only Mellanox drivers - restrictions: - - settings:common.libvirt_type.value != 'kvm' - - data: ethernet - description: If selected, both Mellanox Ethernet drivers and Mellanox network - acceleration (Neutron) plugin will be installed. - label: Install Mellanox drivers and SR-IOV plugin - restrictions: - - settings:common.libvirt_type.value != 'kvm' or not (cluster:net_provider - == 'neutron' and networking_parameters:segmentation_type == 'vlan') - weight: 60 - vf_num: - description: Note that one virtual function will be reserved to the storage - network, in case of choosing iSER. - label: Number of virtual NICs - restrictions: - - settings:neutron_mellanox.plugin.value != 'ethernet' - type: text - value: '16' - weight: 70 - nsx_plugin: - connector_type: - description: Default network transport type to use - label: NSX connector type - type: select - value: stt - values: - - data: gre - label: GRE - - data: ipsec_gre - label: GRE over IPSec - - data: stt - label: STT - - data: ipsec_stt - label: STT over IPSec - - data: bridge - label: Bridge - weight: 80 - l3_gw_service_uuid: - description: UUID for the default L3 gateway service to use with this cluster - label: L3 service UUID - regex: - error: Invalid L3 gateway service UUID - source: '[a-f\d]{8}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{12}' - type: text - value: '' - weight: 50 - metadata: - enabled: false - label: VMware NSX - restrictions: - - action: hide - condition: cluster:net_provider != 'neutron' or networking_parameters:net_l23_provider - != 'nsx' - weight: 20 - nsx_controllers: - description: One or more IPv4[:port] addresses of NSX controller node, separated - by comma (e.g. 10.30.30.2,192.168.110.254:443) - label: NSX controller endpoint - regex: - error: Invalid controller endpoints, specify valid IPv4[:port] pair - source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?(,(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?)*$ - type: text - value: '' - weight: 60 - nsx_password: - description: Password for Administrator - label: NSX password - regex: - error: Empty password - source: \S - type: password - value: '' - weight: 30 - nsx_username: - description: NSX administrator's username - label: NSX username - regex: - error: Empty username - source: \S - type: text - value: admin - weight: 20 - packages_url: - description: URL to NSX specific packages - label: URL to NSX bits - regex: - error: Invalid URL, specify valid HTTP/HTTPS URL with IPv4 address (e.g. - http://10.20.0.2/nsx) - source: ^https?://(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?(/.*)?$ - type: text - value: '' - weight: 70 - replication_mode: - description: '' - label: NSX cluster has Service nodes - type: checkbox - value: true - weight: 90 - transport_zone_uuid: - description: UUID of the pre-existing default NSX Transport zone - label: Transport zone UUID - regex: - error: Invalid transport zone UUID - source: '[a-f\d]{8}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{12}' - type: text - value: '' - weight: 40 - provision: - metadata: - label: Provision - restrictions: - - action: hide - condition: not ('experimental' in version:feature_groups) - weight: 80 - method: - description: Which provision method to use for this cluster. - label: Provision method - type: radio - value: cobbler - values: - - data: image - description: Copying pre-built images on a disk. - label: Image - - data: cobbler - description: Install from scratch using anaconda or debian-installer. - label: Classic (use anaconda or debian-installer) - public_network_assignment: - assign_to_all_nodes: - description: When disabled, public network will be assigned to controllers - and zabbix-server only - label: Assign public network to all nodes - type: checkbox - value: false - weight: 10 - metadata: - label: Public network assignment - restrictions: - - action: hide - condition: cluster:net_provider != 'neutron' - weight: 50 - storage: - ephemeral_ceph: - description: Configures Nova to store ephemeral volumes in RBD. This works - best if Ceph is enabled for volumes and images, too. Enables live migration - of all types of Ceph backed VMs (without this option, live migration will - only work with VMs launched from Cinder volumes). - label: Ceph RBD for ephemeral volumes (Nova) - restrictions: - - settings:common.libvirt_type.value == 'vcenter' - type: checkbox - value: false - weight: 75 - images_ceph: - description: Configures Glance to use the Ceph RBD backend to store images. - If enabled, this option will prevent Swift from installing. - label: Ceph RBD for images (Glance) - type: checkbox - value: false - weight: 30 - images_vcenter: - description: Configures Glance to use the vCenter/ESXi backend to store images. - If enabled, this option will prevent Swift from installing. - label: VMWare vCenter/ESXi datastore for images (Glance) - restrictions: - - settings:common.libvirt_type.value != 'vcenter' - type: checkbox - value: false - weight: 35 - iser: - description: 'High performance block storage: Cinder volumes over iSER protocol - (iSCSI over RDMA). This feature requires SR-IOV capabilities in the NIC, - and will use a dedicated virtual function for the storage network.' - label: iSER protocol for volumes (Cinder) - restrictions: - - settings:storage.volumes_lvm.value != true or settings:common.libvirt_type.value - != 'kvm' - type: checkbox - value: false - weight: 11 - metadata: - label: Storage - weight: 60 - objects_ceph: - description: Configures RadosGW front end for Ceph RBD. This exposes S3 and - Swift API Interfaces. If enabled, this option will prevent Swift from installing. - label: Ceph RadosGW for objects (Swift API) - restrictions: - - settings:storage.images_ceph.value == false - type: checkbox - value: false - weight: 80 - osd_pool_size: - description: Configures the default number of object replicas in Ceph. This - number must be equal to or lower than the number of deployed 'Storage - - Ceph OSD' nodes. - label: Ceph object replication factor - regex: - error: Invalid number - source: ^[1-9]\d*$ - restrictions: - - settings:common.libvirt_type.value == 'vcenter' - type: text - value: '2' - weight: 85 - vc_datacenter: - description: Inventory path to a datacenter. If you want to use ESXi host - as datastore, it should be "ha-datacenter". - label: Datacenter name - regex: - error: Empty datacenter - source: \S - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: text - value: '' - weight: 65 - vc_datastore: - description: Datastore associated with the datacenter. - label: Datastore name - regex: - error: Empty datastore - source: \S - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: text - value: '' - weight: 60 - vc_host: - description: IP Address of vCenter/ESXi - label: vCenter/ESXi IP - regex: - error: Specify valid IPv4 address - source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])$ - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: text - value: '' - weight: 45 - vc_image_dir: - description: The name of the directory where the glance images will be stored - in the VMware datastore. - label: Datastore Images directory - regex: - error: Empty images directory - source: \S - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: text - value: /openstack_glance - weight: 70 - vc_password: - description: vCenter/ESXi admin password - label: Password - regex: - error: Empty password - source: \S - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: password - value: '' - weight: 55 - vc_user: - description: vCenter/ESXi admin username - label: Username - regex: - error: Empty username - source: \S - restrictions: - - action: hide - condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value - != 'vcenter' - type: text - value: '' - weight: 50 - volumes_ceph: - description: Configures Cinder to store volumes in Ceph RBD images. - label: Ceph RBD for volumes (Cinder) - restrictions: - - settings:storage.volumes_lvm.value == true or settings:common.libvirt_type.value - == 'vcenter' - type: checkbox - value: false - weight: 20 - volumes_lvm: - description: Requires at least one Storage - Cinder LVM node. - label: Cinder LVM over iSCSI for volumes - restrictions: - - settings:storage.volumes_ceph.value == true - type: checkbox - value: true - weight: 10 - volumes_vmdk: - description: Configures Cinder to store volumes via VMware vCenter. - label: VMware vCenter for volumes (Cinder) - restrictions: - - settings:common.libvirt_type.value != 'vcenter' or settings:storage.volumes_lvm.value - == true - type: checkbox - value: false - weight: 15 - syslog: - metadata: - label: Syslog - weight: 50 - syslog_port: - description: Remote syslog port - label: Port - regex: - error: Invalid Syslog port - source: ^([1-9][0-9]{0,3}|[1-5][0-9]{4}|6[0-4][0-9]{3}|65[0-4][0-9]{2}|655[0-2][0-9]|6553[0-5])$ - type: text - value: '514' - weight: 20 - syslog_server: - description: Remote syslog hostname - label: Hostname - type: text - value: '' - weight: 10 - syslog_transport: - label: Syslog transport protocol - type: radio - value: tcp - values: - - data: udp - description: '' - label: UDP - - data: tcp - description: '' - label: TCP - weight: 30 - vcenter: - cluster: - description: vCenter cluster name. If you have multiple clusters, use comma - to separate names - label: Cluster - regex: - error: Invalid cluster list - source: ^([^,\ ]+([\ ]*[^,\ ])*)(,[^,\ ]+([\ ]*[^,\ ])*)*$ - type: text - value: '' - weight: 40 - datastore_regex: - description: The Datastore regexp setting specifies the data stores to use - with Compute. For example, "nas.*". If you want to use all available datastores, - leave this field blank - label: Datastore regexp - regex: - error: Invalid datastore regexp - source: ^(\S.*\S|\S|)$ - type: text - value: '' - weight: 50 - host_ip: - description: IP Address of vCenter - label: vCenter IP - regex: - error: Specify valid IPv4 address - source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])$ - type: text - value: '' - weight: 10 - metadata: - label: vCenter - restrictions: - - action: hide - condition: settings:common.libvirt_type.value != 'vcenter' - weight: 20 - use_vcenter: - description: '' - label: '' - type: hidden - value: true - weight: 5 - vc_password: - description: vCenter admin password - label: Password - regex: - error: Empty password - source: \S - type: password - value: admin - weight: 30 - vc_user: - description: vCenter admin username - label: Username - regex: - error: Empty username - source: \S - type: text - value: admin - weight: 20 - vlan_interface: - description: Physical ESXi host ethernet adapter for VLAN networking (e.g. - vmnic1). If empty "vmnic0" is used by default - label: ESXi VLAN interface - restrictions: - - action: hide - condition: cluster:net_provider != 'nova_network' or networking_parameters:net_manager - != 'VlanManager' - type: text - value: '' - weight: 60 - zabbix: - metadata: - label: Zabbix Access - restrictions: - - action: hide - condition: not ('experimental' in version:feature_groups) - weight: 70 - password: - description: Password for Zabbix Administrator - label: password - type: password - value: zabbix - weight: 20 - username: - description: Username for Zabbix Administrator - label: username - type: text - value: admin - weight: 10 diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/dha.yaml b/fuel/prototypes/auto-deploy/examples/libvirt/conf/dha.yaml deleted file mode 100644 index 66395e8..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/conf/dha.yaml +++ /dev/null @@ -1,49 +0,0 @@ -title: Deployment Hardware Adapter (DHA) -# DHA API version supported -version: 1.1 -created: Sat Apr 25 16:26:22 UTC 2015 -comment: Small libvirt setup - -# Adapter to use for this definition -adapter: libvirt - -# Node list. -# Mandatory fields are id and role. -# The MAC address of the PXE boot interface is not mandatory -# to be set, but the field must be present. -# All other fields are adapter specific. - -nodes: -- id: 1 - pxeMac: 52:54:00:aa:dd:84 - libvirtName: controller1 -- id: 2 - pxeMac: 52:54:00:41:64:f3 - libvirtName: compute4 -- id: 3 - pxeMac: 52:54:00:69:a0:79 - libvirtName: compute5 -- id: 4 - pxeMac: 52:54:00:f8:b0:75 - libvirtName: fuel-master - isFuel: yes - -# Deployment power on strategy -# all: Turn on all nodes at once. There will be no correlation -# between the DHA and DEA node numbering. MAC addresses -# will be used to select the node roles though. -# sequence: Turn on the nodes in sequence starting with the lowest order -# node and wait for the node to be detected by Fuel. Not until -# the node has been detected and assigned a role will the next -# node be turned on. -powerOnStrategy: all - -# If fuelCustomInstall is set to true, Fuel is assumed to be installed by -# calling the DHA adapter function "dha_fuelCustomInstall()" with two -# arguments: node ID and the ISO file name to deploy. The custom install -# function is then to handle all necessary logic to boot the Fuel master -# from the ISO and then return. -# Allowed values: true, false - -fuelCustomInstall: false - diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel1 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel1 deleted file mode 100644 index 7b2b154..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel1 +++ /dev/null @@ -1,12 +0,0 @@ -<network> - <name>fuel1</name> - <forward mode='nat'> - <nat> - <port start='1024' end='65535'/> - </nat> - </forward> - <bridge name='fuel1' stp='on' delay='0'/> - <ip address='10.20.0.1' netmask='255.255.255.0'> - </ip> -</network> - diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel2 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel2 deleted file mode 100644 index 615c920..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel2 +++ /dev/null @@ -1,5 +0,0 @@ -<network> - <name>fuel2</name> - <bridge name='fuel2' stp='on' delay='0'/> -</network> - diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel3 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel3 deleted file mode 100644 index 2383e6c..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel3 +++ /dev/null @@ -1,5 +0,0 @@ -<network> - <name>fuel3</name> - <bridge name='fuel3' stp='on' delay='0'/> -</network> - diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel4 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel4 deleted file mode 100644 index 5b69f91..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel4 +++ /dev/null @@ -1,12 +0,0 @@ -<network> - <name>fuel4</name> - <forward mode='nat'> - <nat> - <port start='1024' end='65535'/> - </nat> - </forward> - <bridge name='fuel4' stp='on' delay='0'/> - <ip address='172.16.0.1' netmask='255.255.255.0'> - </ip> -</network> - diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute4 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute4 deleted file mode 100644 index ad5d4d1..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute4 +++ /dev/null @@ -1,107 +0,0 @@ -<domain type='kvm'> - <name>compute4</name> - <uuid>6206efbf-18e1-492e-951a-60eda6676ef5</uuid> - <memory unit='KiB'>8388608</memory> - <currentMemory unit='KiB'>8388608</currentMemory> - <vcpu placement='static'>2</vcpu> - <os> - <type arch='x86_64' machine='pc-1.0'>hvm</type> - <boot dev='network'/> - <boot dev='hd'/> - <bootmenu enable='yes'/> - <bios rebootTimeout='30000'/> - </os> - <features> - <acpi/> - <apic/> - <pae/> - </features> - <cpu mode='custom' match='exact'> - <model fallback='allow'>SandyBridge</model> - <vendor>Intel</vendor> - <feature policy='require' name='vme'/> - <feature policy='require' name='dtes64'/> - <feature policy='require' name='vmx'/> - <feature policy='require' name='erms'/> - <feature policy='require' name='xtpr'/> - <feature policy='require' name='smep'/> - <feature policy='require' name='pcid'/> - <feature policy='require' name='est'/> - <feature policy='require' name='monitor'/> - <feature policy='require' name='smx'/> - <feature policy='require' name='tm'/> - <feature policy='require' name='acpi'/> - <feature policy='require' name='osxsave'/> - <feature policy='require' name='ht'/> - <feature policy='require' name='pdcm'/> - <feature policy='require' name='fsgsbase'/> - <feature policy='require' name='f16c'/> - <feature policy='require' name='ds'/> - <feature policy='require' name='tm2'/> - <feature policy='require' name='ss'/> - <feature policy='require' name='pbe'/> - <feature policy='require' name='ds_cpl'/> - <feature policy='require' name='rdrand'/> - </cpu> - <clock offset='utc'/> - <on_poweroff>destroy</on_poweroff> - <on_reboot>restart</on_reboot> - <on_crash>restart</on_crash> - <devices> - <emulator>/usr/bin/kvm</emulator> - <disk type='file' device='disk'> - <driver name='qemu' type='raw'/> - <source file='disk.raw'/> - <target dev='vda' bus='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> - </disk> - <controller type='usb' index='0'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> - </controller> - <controller type='pci' index='0' model='pci-root'/> - <interface type='network'> - <mac address='52:54:00:41:64:f3'/> - <source network='fuel1'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> - </interface> - <interface type='network'> - <mac address='52:54:00:67:00:5e'/> - <source network='fuel2'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> - </interface> - <interface type='network'> - <mac address='52:54:00:3e:dd:0d'/> - <source network='fuel3'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> - </interface> - <interface type='network'> - <mac address='52:54:00:a6:3c:32'/> - <source network='fuel4'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> - </interface> - <serial type='pty'> - <target port='0'/> - </serial> - <console type='pty'> - <target type='serial' port='0'/> - </console> - <input type='mouse' bus='ps2'/> - <input type='keyboard' bus='ps2'/> - <graphics type='vnc' port='-1' autoport='yes' keymap='sv'/> - <sound model='ich6'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> - </sound> - <video> - <model type='cirrus' vram='9216' heads='1'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> - </video> - <memballoon model='virtio'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> - </memballoon> - </devices> -</domain> - diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute5 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute5 deleted file mode 100644 index 3905906..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute5 +++ /dev/null @@ -1,106 +0,0 @@ -<domain type='kvm'> - <name>compute5</name> - <uuid>2c1e50fa-110f-4ab7-98ff-7c5e08c8f38f</uuid> - <memory unit='KiB'>8388608</memory> - <currentMemory unit='KiB'>8388608</currentMemory> - <vcpu placement='static'>2</vcpu> - <os> - <type arch='x86_64' machine='pc-1.0'>hvm</type> - <boot dev='network'/> - <boot dev='hd'/> - <bios rebootTimeout='30000'/> - </os> - <features> - <acpi/> - <apic/> - <pae/> - </features> - <cpu mode='custom' match='exact'> - <model fallback='allow'>SandyBridge</model> - <vendor>Intel</vendor> - <feature policy='require' name='vme'/> - <feature policy='require' name='dtes64'/> - <feature policy='require' name='vmx'/> - <feature policy='require' name='erms'/> - <feature policy='require' name='xtpr'/> - <feature policy='require' name='smep'/> - <feature policy='require' name='pcid'/> - <feature policy='require' name='est'/> - <feature policy='require' name='monitor'/> - <feature policy='require' name='smx'/> - <feature policy='require' name='tm'/> - <feature policy='require' name='acpi'/> - <feature policy='require' name='osxsave'/> - <feature policy='require' name='ht'/> - <feature policy='require' name='pdcm'/> - <feature policy='require' name='fsgsbase'/> - <feature policy='require' name='f16c'/> - <feature policy='require' name='ds'/> - <feature policy='require' name='tm2'/> - <feature policy='require' name='ss'/> - <feature policy='require' name='pbe'/> - <feature policy='require' name='ds_cpl'/> - <feature policy='require' name='rdrand'/> - </cpu> - <clock offset='utc'/> - <on_poweroff>destroy</on_poweroff> - <on_reboot>restart</on_reboot> - <on_crash>restart</on_crash> - <devices> - <emulator>/usr/bin/kvm</emulator> - <disk type='file' device='disk'> - <driver name='qemu' type='raw'/> - <source file='disk.raw'/> - <target dev='vda' bus='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> - </disk> - <controller type='usb' index='0'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> - </controller> - <controller type='pci' index='0' model='pci-root'/> - <interface type='network'> - <mac address='52:54:00:69:a0:79'/> - <source network='fuel1'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> - </interface> - <interface type='network'> - <mac address='52:54:00:58:4c:df'/> - <source network='fuel2'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> - </interface> - <interface type='network'> - <mac address='52:54:00:27:54:1d'/> - <source network='fuel3'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> - </interface> - <interface type='network'> - <mac address='52:54:00:84:b8:c4'/> - <source network='fuel4'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> - </interface> - <serial type='pty'> - <target port='0'/> - </serial> - <console type='pty'> - <target type='serial' port='0'/> - </console> - <input type='mouse' bus='ps2'/> - <input type='keyboard' bus='ps2'/> - <graphics type='vnc' port='-1' autoport='yes' keymap='sv'/> - <sound model='ich6'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> - </sound> - <video> - <model type='cirrus' vram='9216' heads='1'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> - </video> - <memballoon model='virtio'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> - </memballoon> - </devices> -</domain> - diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/controller1 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/controller1 deleted file mode 100644 index ca1bd3b..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/controller1 +++ /dev/null @@ -1,106 +0,0 @@ -<domain type='kvm'> - <name>controller1</name> - <uuid>ce9897c1-d9e7-452c-b998-9fad0cf5b9db</uuid> - <memory unit='KiB'>2097152</memory> - <currentMemory unit='KiB'>2097152</currentMemory> - <vcpu placement='static'>2</vcpu> - <os> - <type arch='x86_64' machine='pc-1.0'>hvm</type> - <boot dev='network'/> - <boot dev='hd'/> - <bios rebootTimeout='30000'/> - </os> - <features> - <acpi/> - <apic/> - <pae/> - </features> - <cpu mode='custom' match='exact'> - <model fallback='allow'>SandyBridge</model> - <vendor>Intel</vendor> - <feature policy='require' name='vme'/> - <feature policy='require' name='dtes64'/> - <feature policy='require' name='vmx'/> - <feature policy='require' name='erms'/> - <feature policy='require' name='xtpr'/> - <feature policy='require' name='smep'/> - <feature policy='require' name='pcid'/> - <feature policy='require' name='est'/> - <feature policy='require' name='monitor'/> - <feature policy='require' name='smx'/> - <feature policy='require' name='tm'/> - <feature policy='require' name='acpi'/> - <feature policy='require' name='osxsave'/> - <feature policy='require' name='ht'/> - <feature policy='require' name='pdcm'/> - <feature policy='require' name='fsgsbase'/> - <feature policy='require' name='f16c'/> - <feature policy='require' name='ds'/> - <feature policy='require' name='tm2'/> - <feature policy='require' name='ss'/> - <feature policy='require' name='pbe'/> - <feature policy='require' name='ds_cpl'/> - <feature policy='require' name='rdrand'/> - </cpu> - <clock offset='utc'/> - <on_poweroff>destroy</on_poweroff> - <on_reboot>restart</on_reboot> - <on_crash>restart</on_crash> - <devices> - <emulator>/usr/bin/kvm</emulator> - <disk type='file' device='disk'> - <driver name='qemu' type='raw'/> - <source file='disk.raw'/> - <target dev='vda' bus='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> - </disk> - <controller type='usb' index='0'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> - </controller> - <controller type='pci' index='0' model='pci-root'/> - <interface type='network'> - <mac address='52:54:00:aa:dd:84'/> - <source network='fuel1'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> - </interface> - <interface type='network'> - <mac address='52:54:00:e4:6e:d9'/> - <source network='fuel2'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> - </interface> - <interface type='network'> - <mac address='52:54:00:60:88:73'/> - <source network='fuel3'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> - </interface> - <interface type='network'> - <mac address='52:54:00:f0:b2:0f'/> - <source network='fuel4'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> - </interface> - <serial type='pty'> - <target port='0'/> - </serial> - <console type='pty'> - <target type='serial' port='0'/> - </console> - <input type='mouse' bus='ps2'/> - <input type='keyboard' bus='ps2'/> - <graphics type='vnc' port='-1' autoport='yes' keymap='sv'/> - <sound model='ich6'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> - </sound> - <video> - <model type='cirrus' vram='9216' heads='1'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> - </video> - <memballoon model='virtio'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> - </memballoon> - </devices> -</domain> - diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/fuel-master b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/fuel-master deleted file mode 100644 index d2a7841..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/fuel-master +++ /dev/null @@ -1,102 +0,0 @@ -<domain type='kvm'> - <name>fuel-master</name> - <uuid>caabab80-b42f-4f9d-9c0d-18f274c4cb58</uuid> - <memory unit='KiB'>2097152</memory> - <currentMemory unit='KiB'>2097152</currentMemory> - <vcpu placement='static'>2</vcpu> - <resource> - <partition>/machine</partition> - </resource> - <os> - <type arch='x86_64' machine='pc-1.0'>hvm</type> - <boot dev='hd'/> - <boot dev='cdrom'/> - <bootmenu enable='no'/> - </os> - <features> - <acpi/> - <apic/> - <pae/> - </features> - <cpu mode='custom' match='exact'> - <model fallback='allow'>SandyBridge</model> - <vendor>Intel</vendor> - <feature policy='require' name='vme'/> - <feature policy='require' name='dtes64'/> - <feature policy='require' name='vmx'/> - <feature policy='require' name='erms'/> - <feature policy='require' name='xtpr'/> - <feature policy='require' name='smep'/> - <feature policy='require' name='pcid'/> - <feature policy='require' name='est'/> - <feature policy='require' name='monitor'/> - <feature policy='require' name='smx'/> - <feature policy='require' name='tm'/> - <feature policy='require' name='acpi'/> - <feature policy='require' name='osxsave'/> - <feature policy='require' name='ht'/> - <feature policy='require' name='pdcm'/> - <feature policy='require' name='fsgsbase'/> - <feature policy='require' name='f16c'/> - <feature policy='require' name='ds'/> - <feature policy='require' name='tm2'/> - <feature policy='require' name='ss'/> - <feature policy='require' name='pbe'/> - <feature policy='require' name='ds_cpl'/> - <feature policy='require' name='rdrand'/> - </cpu> - <clock offset='utc'/> - <on_poweroff>destroy</on_poweroff> - <on_reboot>restart</on_reboot> - <on_crash>restart</on_crash> - <devices> - <emulator>/usr/bin/kvm</emulator> - <disk type='block' device='cdrom'> - <driver name='qemu' type='raw'/> - <target dev='hdc' bus='ide'/> - <readonly/> - <address type='drive' controller='0' bus='1' target='0' unit='0'/> - </disk> - <disk type='file' device='disk'> - <driver name='qemu' type='raw'/> - <source file='disk.raw'/> - <target dev='vda' bus='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> - </disk> - <controller type='ide' index='0'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> - </controller> - <controller type='usb' index='0'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> - </controller> - <controller type='pci' index='0' model='pci-root'/> - <interface type='network'> - <mac address='52:54:00:f8:b0:75'/> - <source network='fuel1'/> - <model type='virtio'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> - </interface> - <serial type='pty'> - <target port='0'/> - </serial> - <console type='pty'> - <target type='serial' port='0'/> - </console> - <input type='mouse' bus='ps2'/> - <input type='keyboard' bus='ps2'/> - <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1' keymap='sv'> - <listen type='address' address='127.0.0.1'/> - </graphics> - <sound model='ich6'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> - </sound> - <video> - <model type='cirrus' vram='9216' heads='1'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> - </video> - <memballoon model='virtio'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> - </memballoon> - </devices> -</domain> - diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/install-ubuntu-packages.sh b/fuel/prototypes/auto-deploy/examples/libvirt/install-ubuntu-packages.sh deleted file mode 100755 index 58ce19a..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/install-ubuntu-packages.sh +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/bash -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -# Tools for installation on the libvirt server/base host -# -apt-get install -y libvirt-bin qemu-kvm tightvncserver virt-manager \ - sshpass fuseiso genisoimage blackbox xterm -restart libvirt-bin diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/setup_example_vms.sh b/fuel/prototypes/auto-deploy/examples/libvirt/setup_example_vms.sh deleted file mode 100755 index e0388ac..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/setup_example_vms.sh +++ /dev/null @@ -1,105 +0,0 @@ -#!/bin/bash -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -exit_handler() { - rm $tmpfile -} - - -error_exit () { - echo "$@" - exit 1 -} - -trap exit_handler EXIT - -# You can change these disk sizes to adapt to your needs -fueldisk="30G" -controllerdisk="20G" -computedisk="20G" - - -topdir=$(dirname $(readlink -f $BASH_SOURCE)) -netdir=$topdir/conf/networks -vmdir=$topdir/conf/vms -tmpfile=`mktemp /tmp/XXXXX` - -if [ ! -d $netdir ]; then - error_exit "No net directory $netdir" - exit 1 -elif [ ! -d $vmdir ]; then - error_exit "No VM directory $vmdir" - exit 1 -fi - -if [ $# -ne 1 ]; then - echo "Argument error." - echo "`basename $0` <path to storage dir>" - exit 1 -fi - -if [ "`whoami`" != "root" ]; then - error_exit "You need be root to run this script" -fi - -echo "Cleaning up" -tools/cleanup_example_vms.sh - -storagedir=$1 - -if [ ! -d $storagedir ]; then - error_exit "Could not find storagedir directory $storagedir" -fi - -# Create storage space and patch it in -for vm in $vmdir/* -do - vmname=`basename $vm` - virsh dumpxml $vmname >/dev/null 2>&1 - if [ $? -eq 0 ]; then - echo "Found vm $vmname, deleting" - virsh destroy $vmname - virsh undefine $vmname - sleep 10 - - fi - - - storage=${storagedir}/`basename ${vm}`.raw - if [ -f ${storage} ]; then - echo "Storage already present, removing: $storage" - rm $storage - fi - - echo `basename $vm` | grep -q fuel-master && size=$fueldisk - echo `basename $vm` | grep -q controller && size=$controllerdisk - echo `basename $vm` | grep -q compute && size=$computedisk - - echo "Creating ${size} GB of storage in ${storage}" - fallocate -l ${size} ${storage} || \ - error_exit "Could not create storage" - sed "s:<source file='disk.raw':<source file='${storage}':" $vm >$tmpfile - virsh define $tmpfile -done - -for net in $netdir/* -do - netname=`basename $net` - virsh net-dumpxml $netname >/dev/null 2>&1 - if [ $? -eq 0 ]; then - echo "Found net $netname, deleting" - virsh net-destroy $netname - virsh net-undefine $netname - fi - virsh net-define $net - virsh net-autostart $netname - virsh net-start $netname -done diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/tools/cleanup_example_vms.sh b/fuel/prototypes/auto-deploy/examples/libvirt/tools/cleanup_example_vms.sh deleted file mode 100755 index 960b21e..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/tools/cleanup_example_vms.sh +++ /dev/null @@ -1,58 +0,0 @@ -#!/bin/bash -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - - -error_exit () { - echo "$@" - exit 1 -} - -topdir=$(cd $(dirname $(readlink -f $BASH_SOURCE)); cd ..; pwd) -netdir=$topdir/conf/networks -vmdir=$topdir/conf/vms - -if [ ! -d $netdir ]; then - error_exit "No net directory $netdir" - exit 1 -elif [ ! -d $vmdir ]; then - error_exit "No VM directory $vmdir" - exit 1 -fi - - -if [ "`whoami`" != "root" ]; then - error_exit "You need be root to run this script" -fi - -for vm in $vmdir/* -do - vmname=`basename $vm` - virsh dumpxml $vmname >/dev/null 2>&1 - if [ $? -eq 0 ]; then - diskfile=`virsh dumpxml $vmname | grep "<source file=" | grep raw | \ - sed "s/.*<source file='\(.*\)'.*/\1/"` - echo "Removing $vmname with disk $diskfile" - virsh destroy $vmname 2>/dev/null - virsh undefine $vmname - rm -f $diskfile - fi -done - -for net in $netdir/* -do - netname=`basename $net` - virsh net-dumpxml $netname >/dev/null 2>&1 - if [ $? -eq 0 ]; then - echo "Found net $netname, deleting" - virsh net-destroy $netname - virsh net-undefine $netname - fi -done diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/tools/dump_setup.sh b/fuel/prototypes/auto-deploy/examples/libvirt/tools/dump_setup.sh deleted file mode 100755 index cdd029f..0000000 --- a/fuel/prototypes/auto-deploy/examples/libvirt/tools/dump_setup.sh +++ /dev/null @@ -1,68 +0,0 @@ -#!/bin/bash -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -topdir=$(cd $(dirname $(readlink -f $BASH_SOURCE)); cd ..; pwd) -netdir=$topdir/conf/networks -vmdir=$topdir/conf/vms -vms="fuel-master controller1 compute4 compute5" -networks="fuel1 fuel2 fuel3 fuel4" - - -if [ "`whoami`" != "root" ]; then - error_exit "You need be root to run this script" -fi - -mkdir -p $netdir -mkdir -p $vmdir - -if [ `ls -1 $netdir/ | wc -l` -ne 0 ]; then - echo "There are files in $netdir already!" - exit 1 -elif [ `ls -1 $vmdir/ | wc -l` -ne 0 ]; then - echo "There are files in $vmdir already!" - exit 1 -fi - - -# Check that no VM is up -for vm in $vms -do - if [ "`virsh domstate $vm`" == "running" ]; then - echo "Can't dump while VM are up: $vm" - exit 1 - fi -done - -# Dump all networks in the fuell* namespace -for net in $networks -do - virsh net-dumpxml $net > $netdir/$net -done - -# Dump all fuel-master, compute* and controller* VMs -for vm in $vms -do - virsh dumpxml $vm > $vmdir/$vm -done - -# Remove all attached ISOs, generalize disk file -for vm in $vmdir/* -do - sed -i '/.iso/d' $vm - sed -i "s/<source file='.*raw'/<source file='disk.raw'/" $vm -done - -# Generalize all nets -for net in $netdir/* -do - sed -i '/<uuid/d' $net - sed -i '/<mac/d' $net -done |