summaryrefslogtreecommitdiffstats
path: root/fuel/docs
diff options
context:
space:
mode:
Diffstat (limited to 'fuel/docs')
-rw-r--r--fuel/docs/src/build-instructions.rst177
-rw-r--r--fuel/docs/src/installation-instructions.rst19
-rw-r--r--fuel/docs/src/release-notes.rst9
-rw-r--r--fuel/docs/src/tmp/BUILD/README.architecture10
-rw-r--r--fuel/docs/src/tmp/BUILD/README.build98
-rw-r--r--fuel/docs/src/tmp/BUILD/README.examples10
6 files changed, 194 insertions, 129 deletions
diff --git a/fuel/docs/src/build-instructions.rst b/fuel/docs/src/build-instructions.rst
new file mode 100644
index 0000000..e923cab
--- /dev/null
+++ b/fuel/docs/src/build-instructions.rst
@@ -0,0 +1,177 @@
+:Authors: Jonas Bjurel (Ericsson)
+:Version: 0.1.0
+
+================================================================
+OPNFV Build instructions for - < Component denomination >
+================================================================
+
+Abstract
+========
+
+This document describes how to build <Component>, build system dependencies and required system resources.
+
+License
+=======
+Fuel@OPNFV DOCs (c) by Jonas Bjurel (Ericsson AB)
+
+Fuel@OPNFV DOCs (c) is licensed under a Creative Commons Attribution 4.0 International License. You should have received a copy of the license along with this. If not, see <http://creativecommons.org/licenses/by/4.0/>.
+
+
+**Contents**
+
+1 Version history
+
+2 Introduction
+
+3 Requirements
+
+4 Building
+
+5 Artifacts
+
+
+1 Version history
+===================
+
++--------------------+--------------------+--------------------+--------------------+
+| **Date** | **Ver.** | **Author** | **Comment** |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+| 2015-04-23 | 0.1.0 | Jonas Bjurel | First draft |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+
+2 Introduction
+================
+
+This document describes build system used to build Fuel@OPNFV, required dependencies and minimum requirements on the host to be used for the buildsystem.
+
+The Fuel build system is desigened around Docker containers such that dependencies outside of the build system can be kept to a minimum. It also shields the host from any potential dangerous operations performed by the build system.
+
+The audience of this document is assumed to have good knowledge in network and Unix/Linux administration.
+
+3 Requirements
+================
+
+3.1 Minimum Hardware Requirements
+---------------------------------
+
+- An x86_64 host (Bare-metal or VM) with Ubuntu 14.04 LTS installed
+
+- ~30 GB available disc
+
+- 4 GB RAM
+
+3.2 Minimum Software Requirements
+---------------------------------
+
+The build host should run Ubuntu 14.04 operating system.
+
+On the host, the following packages must be installed:
+
+- docker - see https://docs.docker.com/installation/ubuntulinux/ for installation notes for Ubuntu 14.04. Note: only use the Ubuntu stock distro of Docker (docker.io)
+
+- git (simply available through sudo apt-get install git)
+
+- make (simply available through sudo apt-get install make)
+
+- curl (simply available through sudo apt-get install curl)
+
+3.3 Preparations
+----------------
+
+3.3.1 Setting up the Docker build container
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+After having installed Docker, add yourself to the docker group:
+
+<usermod -a -G docker [userid]>
+
+Also make sure to define relevant DNS servers part of the global dns chain in
+in your </etc/default/docker> configuration file, eg.
+
+<DOCKER_OPTS=" --dns=8.8.8.8 --dns=8.8.8.4">
+
+Then restart docker:
+
+<sudo service docker.io restart>
+
+3.3.2 Setting up OPNFV Gerrit in order to being able to clone the code
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+- Start setting up OPNFV gerrit by creating a SSH key (unless you don't already have one), create one with ssh-keygen
+
+- Add your generated public key in OPNFV Gerrit <https://gerrit.opnfv.org/>
+ (this requires a linuxfoundation account, create one if you do not already have one)
+
+- Select "SSH Public Keys" to the left and then "Add Key" and paste your public key in.
+
+3.3.3 Clone the OPNFV code git repository
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Now it is time to clone the code repository:
+
+<git clone ssh://[Linux foundation user]@gerrit.opnfv.org:29418/genesis>
+
+Now you should have the OPNFV genesis repository with Fuel@OPNFV stored locally on your build host.
+
+4 Building
+============
+
+There are two methods available for building Fuel@OPNFV:
+
+- A low level method using Make
+
+- An abstracted method using build.sh
+
+4.1 Configure your build environment
+-------------------------------------
+
+Select the versions of the components you want to build by editing the fuel/build/config.mk file.
+Note if you want to build with OpenDaylight SDN controller you need to uncomment the lines starting
+with odl-main and java-main
+
+4.2 Low level build method using make
+--------------------------------------
+The low level method is based on Make:
+
+From the <fuel/build directory> invoke <make [target]>
+
+Following targets exist:
+
+- none/all - this will:
+
+ - If not allready existing, initialize the docker build environment
+
+ - If not already done, build OpenDaylight from upstream (as defined by fuel-build config-spec)
+
+ - If not already done, build fuel from upstream (as defined by fuel-build/config-spec)
+
+ - Build the defined additions to fuel (as defined by the structure of this framework)
+
+ - Apply changes and patches to fuel (as defined by the structure of this framework)
+
+ - Reconstruct a fuel .iso image
+
+- clean - this will remove all artifacts from earlier builds.
+
+If the build is successful, you will find the generated ISO file in the <fuel/build/release> subdirectory!
+
+4.3 Abstracted build method using build.sh
+===========================================
+The abstracted build method useses the <fuel/ci/build.sh> script which allows you to:
+
+- Create and use a build cache - significantly speeding up the buildtime if upstream repositories have not changed.
+
+- push/pull cache and artifacts to an arbitrary URI (http(s):, file:, ftp:)
+
+For more info type <fuel/ci/build.sh -h>.
+
+5 Artifacts
+=============
+
+The artifacts produced are:
+
+- <OPNFV_XXXX.iso> - Which represents the bootable Fuel@OPNFV image, XXXX is replaced with the build identity provided to the build system
+
+- <OPNFV_XXXX.iso.txt> - Which holds version metadata.
+
+6 References
+=============
diff --git a/fuel/docs/src/installation-instructions.rst b/fuel/docs/src/installation-instructions.rst
index 234dfc2..05f56f3 100644
--- a/fuel/docs/src/installation-instructions.rst
+++ b/fuel/docs/src/installation-instructions.rst
@@ -1,5 +1,5 @@
:Authors: Jonas Bjurel (Ericsson AB)
-:Version: 0.0.1
+:Version: 0.0.2
================================================
OPNFV Installation instructions for - Fuel@OPNFV
@@ -14,7 +14,7 @@ License
=======
Fuel@OPNFV DOCs (c) by Jonas Bjurel (Ericsson AB)
-Fuel@OPNFV DOCs are licensed under a Creative Commons Attribution 4.0 Unported License. You should have received a copy of the license along with this. If not, see <http://creativecommons.org/licenses/by/4.0/>.
+Fuel@OPNFV DOCs are licensed under a Creative Commons Attribution 4.0 International License. You should have received a copy of the license along with this. If not, see <http://creativecommons.org/licenses/by/4.0/>.
**Contents**
@@ -47,6 +47,9 @@ Fuel@OPNFV DOCs are licensed under a Creative Commons Attribution 4.0 Unported L
| 2015-04-15 | 0.0.1 | Jonas Bjurel | First draft |
| | | (Ericsson AB) | |
+--------------------+--------------------+--------------------+--------------------+
+| 2015-04-23 | 0.0.2 | Jonas Bjurel | Minor changes |
+| | | (Ericsson AB) | |
++--------------------+--------------------+--------------------+--------------------+
2 Introduction
@@ -231,8 +234,8 @@ This section describes the installation of the Fuel@OPNFV installation server (F
14. Select network mode.
- - Select Neutron with VLAN segmentation
-
+ - Select Neutron with VLAN segmentation
+
** Note: This will later be overridden to VXLAN by OpenDaylight.**
15. Select Storage Backends.
@@ -311,13 +314,13 @@ This section describes the installation of the Fuel@OPNFV installation server (F
31. Assign roles.
- Check <Controller and Telemetry MongoDB>.
-
+
- Check the three servers you want to be installed as Controllesr in pane <Assign Role>.
- Click <Apply Changes>.
-
+
- Check <Compute>.
-
+
- Check nodes to be installed as Compute nodes in pane Assign Role.
- Click <Apply Changes>.
@@ -327,7 +330,7 @@ This section describes the installation of the Fuel@OPNFV installation server (F
- Check Select <All> to select all nodes with Control, Telemetry . MongoDB and Compute node roles.
- Click <Configure Interfaces>
-
+
- Screen Configure interfaces on number of <number of nodes> nodes is shown.
- Assign interfaces (bonded) for mgmt-, admin-, private-, public- and storage networks
diff --git a/fuel/docs/src/release-notes.rst b/fuel/docs/src/release-notes.rst
index 467de6e..221b7f7 100644
--- a/fuel/docs/src/release-notes.rst
+++ b/fuel/docs/src/release-notes.rst
@@ -1,5 +1,5 @@
:Authors: Jonas Bjurel (Ericsson)
-:Version: 0.1
+:Version: 0.2
================================================================
OPNFV Release Note for "Arno-RC2 release candidate" - Fuel@OPNFV
@@ -14,7 +14,7 @@ License
=======
Fuel@OPNFV DOCs (c) by Jonas Bjurel (Ericsson AB)
-Fuel@OPNFV DOCs are licensed under a Creative Commons Attribution 4.0 Unported License. You should have received a copy of the license along with this. If not, see <http://creativecommons.org/licenses/by/4.0/>.
+Fuel@OPNFV DOCs are licensed under a Creative Commons Attribution 4.0 International License. You should have received a copy of the license along with this. If not, see <http://creativecommons.org/licenses/by/4.0/>.
**Contents**
@@ -40,7 +40,10 @@ Fuel@OPNFV DOCs are licensed under a Creative Commons Attribution 4.0 Unported L
| **Date** | **Ver.** | **Author** | **Comment** |
| | | | |
+--------------------+--------------------+--------------------+--------------------+
-| 2015-04-16 | 0.1.0 | Jonas Bjurel | First draft |
+| 2015-04-16 | 0.1 | Jonas Bjurel | First draft |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+| 2015-04-23 | 0.2 | Jonas Bjurel | Minor change |
| | | | |
+--------------------+--------------------+--------------------+--------------------+
diff --git a/fuel/docs/src/tmp/BUILD/README.architecture b/fuel/docs/src/tmp/BUILD/README.architecture
deleted file mode 100644
index 4629763..0000000
--- a/fuel/docs/src/tmp/BUILD/README.architecture
+++ /dev/null
@@ -1,10 +0,0 @@
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# stefan.k.berg@ericsson.com
-# jonas.bjurel@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
diff --git a/fuel/docs/src/tmp/BUILD/README.build b/fuel/docs/src/tmp/BUILD/README.build
deleted file mode 100644
index b8ce799..0000000
--- a/fuel/docs/src/tmp/BUILD/README.build
+++ /dev/null
@@ -1,98 +0,0 @@
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# stefan.k.berg@ericsson.com
-# jonas.bjurel@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
-How to setup and use the OPNFV/BGS/FUEL build system
-====================================================
-
-1. Build system requirements
-----------------------------
-1.1 Host HW/VM requirements
----------------------------
-- An x86_64 host (real iron or VM) with Ubuntu 14.04 LTS installed
-- ~30 GB available disc
-- 4 GB RAM
-
-1.2 Host SW dependencies
-------------------------
-The host should run Ubuntu 14.04
-On the host, the following packages must be installed:
-- docker - see https://docs.docker.com/installation/ubuntulinux/ for installation notes
-for Ubuntu 14.04. Note: only use the Ubuntu stock distro of Docker (docker.io)
-- git (simply available through apt-get install git)
-- make (simply available through apt-get install make)
-- curl
-
-2 Setting up the Docker build container
-----------------------------------------
-When having installed Docker, add yourself to the docker group:
-usermod -a -G docker <userid>
-
-Also make sure to define rellevant dns servers part of the global dns chain in
-in your /etc/default/docker config file, eg.
-DOCKER_OPTS=" --dns=8.8.8.8 --dns=8.8.8.4"
-
-Then restart docker with "service docker.io restart".:
-
-3. Setting up OPNFV Gerrit in order to being able to clone the code
--------------------------------------------------------------------
-- Start by creating a SSH key, if you don't already have one, create one with ssh-keygen
-
-- Add your generated public key in OPNFV Gerrit -https://gerrit.opnfv.org/
- (this requires a linuxfoundation account, create one if you do not already have one)
-
-- Select "SSH Public Keys" to the left and then "Add Key" and paste your public key in.
-
-4. Clone the OPNFV code git repository
---------------------------------------
- So now we're coming to the fun part! Let's clone the code repository:
- git clone ssh://<Linux foundation user>@gerrit.opnfv.org:29418/genesis
-
- Change the directory to "fuel-build"
- cd fuel-build/
-
-5. Set up (build) your build environment
-----------------------------------------
-Select the versions of the components you want to build by editing the
-fuel-build/config-spec file. Note if you want to build with OpenDaylight
-SDN controller you need to uncomment the lines starting with odl-main and
-java-main
-
-6. Build your fuel .iso image
------------------------------
-That's it, time to build!
-make [all]
-
-This will:
-- If not allready existing, initialize the docker build environment
-- If not already done, build OpenDaylight from upstream (as defined by fuel-build/
- config-spec)
-- If not already done, build fuel from upstream (as defined by fuel-build/config-spec)
-- Build the defined additions to fuel (as defined by the structure of this framework)
-- Apply changes and patches to fuel (as defined by the structure of this framework)
-- Reconstruct a fuel .iso image
-
-If the build is successful, you will find the generated ISO file in the release
-subdirectory!
-
-NOTE: the build of the baseline for Fuel and odl are cached, if build results reffering
-to the same versions as specified in fuel-build/config spec has been built before, these
-packages will not be rebuilt. The cache is cleared by "make clean"
-
-7. Install your stack
----------------------
-Please see DOC/INSTALL/README
-
-NOTES and TODO:
----------------
-The build system will for now partly run as sudo
-BUT NOTE, NONE OF THE MAKEFILES OR SCRIPTS SHALL BE EXECUTED WITH
-SUDO/ROOT PRIVILEDGES!
-TODO: Change the scripts so that no root priviledges will be needed
-
diff --git a/fuel/docs/src/tmp/BUILD/README.examples b/fuel/docs/src/tmp/BUILD/README.examples
deleted file mode 100644
index 4629763..0000000
--- a/fuel/docs/src/tmp/BUILD/README.examples
+++ /dev/null
@@ -1,10 +0,0 @@
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# stefan.k.berg@ericsson.com
-# jonas.bjurel@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-