diff options
Diffstat (limited to 'fuel-build/f_isoroot/f_kscfg/ks.cfg')
| -rwxr-xr-x | fuel-build/f_isoroot/f_kscfg/ks.cfg | 540 |
1 files changed, 540 insertions, 0 deletions
diff --git a/fuel-build/f_isoroot/f_kscfg/ks.cfg b/fuel-build/f_isoroot/f_kscfg/ks.cfg new file mode 100755 index 0000000..8194e8d --- /dev/null +++ b/fuel-build/f_isoroot/f_kscfg/ks.cfg @@ -0,0 +1,540 @@ +install +text +%include /tmp/source.ks +reboot --eject +lang en_US.UTF-8 +keyboard us +rootpw r00tme +timezone --utc Etc/UTC +firewall --disabled +selinux --disabled +# ignore unsupported hardware warning +unsupported_hardware +# SKIP CONFIGURING X +skipx +# NEVER ever place zerombr here, it breaks automated installation +%include /tmp/bootloader.ks +%include /tmp/partition.ks + +# PREINSTALL SECTION +# HERE ARE COMMANDS THAT WILL BE LAUNCHED BEFORE +# INSTALLATION PROCESS ITSELF +%pre +#!/bin/sh + +# hard drives +drives="" +removable_drives="" +for drv in `ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`; do + if (grep -q 0 /sys/block/${drv}/removable); then + drives="${drives} ${drv}" + else + removable_drives="${removable_drives} ${drv}" + fi +done +default_drive=`echo ${drives} ${removable_drives} | awk '{print $1}'` + +installdrive="undefined" +forceformat="no" +for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done + +set ${drives} ${removable_drives} +numdrives=`echo $#` + +tgtdrive="${installdrive}" + +function confirm_format { + check_drive="$1" + local confirm_format="no" + + if [[ "$forceformat" == "yes" ]] ; then + return 0 + fi + + if parted -s /dev/$check_drive print &>/dev/null ; then + echo + echo "$check_drive drive contains partition table:" + parted -s /dev/$check_drive print + echo + read -p "Are you sure you want to erase ALL data on disk $check_drive? (y/N)" confirm_format + if [[ "$confirm_format" == "y" ]] || [[ "$forceformat" == "yes" ]]; then + return 0 + else + return 1 + fi + else + return 0 + fi +} + +format_confirmed="no" + +if [ $numdrives -lt 1 ]; then + exec < /dev/tty3 > /dev/tty3 2>&1 + chvt 3 + clear + echo + echo '********************************************************************' + echo '* E R R O R *' + echo '* *' + echo '* There is no suitable media available for installation. *' + echo '* Please attach a drive and try again. *' + echo '* *' + echo '********************************************************************' + echo + read -p "Press Enter to shut down the system: " _ + poweroff +fi + +if [ ${numdrives} -gt 1 ] || [ `echo ${drives} | wc -w` -eq 0 ] ; then + exec < /dev/tty3 > /dev/tty3 2>&1 + chvt 3 + while [ "${tgtdrive}" = "undefined" ]; do + clear + echo + echo '********************************************************************************' + echo '* W A R N I N G *' + echo '* *' + echo '* Which of the detected hard drives do you want to be used as *' + echo '* the installation target? *' + echo '* *' + echo '********************************************************************************' + echo + echo "Possible choices" + echo "Persistent drives: ${drives}" + echo "Removable drives: ${removable_drives}" + echo + if [ `echo ${drives} | wc -w` -eq 1 ] ; then + read -t 30 -p "Choose hard drive: " tgtdrive || tgtdrive=$default_drive + else + read -p "Choose hard drive: " tgtdrive + fi + match="no" + for drive in ${drives[@]} ${removable_drives[@]}; do + if [[ "$drive" == "$tgtdrive" ]] && match="yes" ; then + if confirm_format $tgtdrive ; then + format_confirmed="yes" + break + else + tgtdrive="undefined" + read -p "You may select another disk. Press Enter to continue." _ + fi + fi + done + if [[ "$match" == "no" ]]; then + tgtdrive="undefined" + read -p "Invalid choice. Press Enter to continue." _ + fi + done + clear + chvt 1 +else + tgtdrive=`echo ${drives} | sed -e "s/^\s*//" -e "s/\s*$//"` +fi + +if [ "$format_confirmed" != "yes" ] ; then + exec < /dev/tty3 > /dev/tty3 2>&1 + chvt 3 + if ! confirm_format $tgtdrive ; then + clear + echo + echo '********************************************************************' + echo '* E R R O R *' + echo '* *' + echo '* Disk $tgtdrive contains active partition(s). *' + echo '* Installation cannot continue without confirmation. *' + echo '* *' + echo '********************************************************************' + echo + read -p "Press Enter to restart: " _ + reboot + fi + chvt 1 +fi + +# verify tgtdrive is at least 30GB +tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 )) +if [ $tgtdrivesize -lt 30720 ]; then + exec < /dev/tty3 > /dev/tty3 2>&1 + chvt 3 + clear + echo + echo '********************************************************************' + echo '* E R R O R *' + echo '* *' + echo '* Your disk is under 30GB in size. Installation cannot continue. *' + echo '* Restart installation with a larger disk. *' + echo '* *' + echo '********************************************************************' + echo + read -p "Press Enter to restart: " _ + reboot +fi + +# paths in /dev have "/" instead of "!" for cciss devices +tgtdrive=$(echo $tgtdrive | sed -e 's/!/\//') + +# source +if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then + echo "harddrive --partition=UUID=will_be_substituted_with_actual_uuid --dir=/" > /tmp/source.ks +else + echo "cdrom" > /tmp/source.ks +fi + +vgremove -ff os +dd if=/dev/zero of=/dev/${tgtdrive} bs=10M count=10 +sleep 3 +hdparm -z /dev/${tgtdrive} +parted -s /dev/${tgtdrive} mklabel gpt +parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 0 24 +parted -s /dev/${tgtdrive} set 1 bios_grub on +parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary fat16 24 224 +parted -s /dev/${tgtdrive} set 2 boot on +parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 224 424 +sleep 3 +hdparm -z /dev/${tgtdrive} + +# partition + +# This adds support for the p seperator required for cciss devices +if echo ${tgtdrive} | grep -q -e cciss ; then + bootdev=${tgtdrive}p +else + bootdev=${tgtdrive} +fi +echo > /tmp/partition.ks +echo "partition /boot --onpart=/dev/${bootdev}3" >> /tmp/partition.ks +echo "partition pv.001 --ondisk=${tgtdrive} --size=30000 --grow" >> /tmp/partition.ks +echo "volgroup os pv.001" >> /tmp/partition.ks +echo "logvol swap --vgname=os --recommended --name=swap" >> /tmp/partition.ks +echo "logvol / --vgname=os --size=10000 --name=root --fstype=ext4" >> /tmp/partition.ks +echo "logvol /var --vgname=os --size=1 --grow --name=var --fstype=xfs" >> /tmp/partition.ks + +# bootloader +echo "bootloader --location=mbr --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks + +# Anaconda can not install grub 0.97 on disks which are >4T. +# The reason is that grub does not support such large geometries +# and it simply thinks that the cylinder number has negative value. +# Here we just set geometry manually so that grub thinks that disk +# size is equal to 1G. +# 130 cylinders * (16065 * 512 = 8225280 bytes) = 1G +echo "%post --nochroot --log=/mnt/sysimage/root/anaconda-post-partition.log" > /tmp/post_partition.ks +echo "echo \"device (hd0) /dev/${tgtdrive}\" >> /tmp/grub.script" >> /tmp/post_partition.ks +echo "echo \"geometry (hd0) 130 255 63\" >> /tmp/grub.script" >> /tmp/post_partition.ks +echo "echo \"root (hd0,2)\" >> /tmp/grub.script" >> /tmp/post_partition.ks +echo "echo \"install /grub/stage1 (hd0) /grub/stage2 p /grub/grub.conf\" >> /tmp/grub.script" >> /tmp/post_partition.ks +echo "echo quit >> /tmp/grub.script" >> /tmp/post_partition.ks +echo "cat /tmp/grub.script | chroot /mnt/sysimage /sbin/grub --no-floppy --batch" >> /tmp/post_partition.ks + +%end + +%packages --nobase --excludedocs +@Core +authconfig +bind-utils +cronie +crontabs +curl +daemonize +dhcp +docker-io +fuelmenu +gdisk +lrzip +lsof +man +mlocate +nmap-ncat +ntp +openssh-clients +policycoreutils +rsync +ruby21-puppet +ruby21-rubygem-netaddr +ruby21-rubygem-openstack +selinux-policy-targeted +strace +subscription-manager +sysstat +system-config-firewall-base +tcpdump +telnet +vim-enhanced +virt-what +wget +yum + +%include /tmp/post_partition.ks + +# POSTINSTALL SECTION +# HERE ARE COMMANDS THAT WILL BE LAUNCHED JUST AFTER +# INSTALLATION ITSELF COMPLETED +%post +echo -e "modprobe nf_conntrack_ipv4\nmodprobe nf_conntrack_ipv6\nmodprobe nf_conntrack_tftp\nmodprobe nf_nat_tftp" >> /etc/rc.modules +chmod +x /etc/rc.modules +echo -e "net.nf_conntrack_max=1048576" >> /etc/sysctl.conf +mkdir -p /var/log/coredump +echo -e "kernel.core_pattern=/var/log/coredump/core.%e.%p.%h.%t" >> /etc/sysctl.conf +chmod 777 /var/log/coredump +echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.conf + +# Mount installation media in chroot +%post --nochroot --log=/mnt/sysimage/root/anaconda-post-before-chroot.log +#!/bin/sh + +SOURCE="/mnt/sysimage/tmp/source" + +for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done + +mkdir -p "${SOURCE}" + +case "${repo}" in + nfs:*) + nfs_url="${repo#nfs:}" + mount -t nfs "${nfs_url}" "${SOURCE}" + ;; + *) + if [ -d "/mnt/source" ]; then + mount -o bind "/mnt/source" "${SOURCE}" + fi + ;; +esac + +%post --log=/root/anaconda-post-after-chroot.log +#!/bin/bash + +set -x + +function save_cfg { + scrFile="/etc/sysconfig/network-scripts/ifcfg-$device" + search="domain $domain\nsearch $domain" + sed -i -e 's#^\(HOSTNAME=\).*$#\1'"$hostname"'#' /etc/sysconfig/network + grep -q "^\s*$ip\s+$hostname" /etc/hosts || echo "$ip $hostname" >> /etc/hosts + echo "${search}\nnameserver 127.0.0.1" > /etc/resolv.conf + [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/resolv.conf + [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/dnsmasq.upstream + [ $dns2 ] && echo "nameserver $dns2" >> /etc/resolv.conf + [ $dns2 ] && echo "nameserver $dns2" >> /etc/dnsmasq.upstream + + echo DEVICE=$device > $scrFile + echo ONBOOT=yes >> $scrFile + echo NM_CONTROLLED=no >> $scrFile + echo HWADDR=$hwaddr >> $scrFile + echo USERCTL=no >> $scrFile + echo PEERDNS=no >> $scrFile + if [ $ip ]; then + echo BOOTPROTO=static >> $scrFile + echo IPADDR=$ip >> $scrFile + echo NETMASK=$netmask >> $scrFile + else + echo BOOTPROTO=dhcp >> $scrFile + fi + scrDHCPFile="/etc/sysconfig/network-scripts/ifcfg-$dhcp_interface" + #Ignore gateway and set up DHCP if it is used, otherwise apply it + if [ $dhcp_interface ] && [ "$dhcp_interface" != "$device" ]; then + echo "DEVICE=$dhcp_interface" > $scrDHCPFile + echo "BOOTPROTO=dhcp" >> $scrDHCPFile + echo "ONBOOT=yes" >> $scrDHCPFile + echo "USERCTL=no" >> $scrDHCPFile + else + echo GATEWAY=$gw >> /etc/sysconfig/network + fi +} + +# Default FQDN +hostname="nailgun.mirantis.com" + +for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done +hostname=$hostname +domain=${hostname#*.} +ip=$ip +netmask=$netmask +gw=$gw +device="eth0" +hwaddr=`ifconfig $device | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'` +dhcp_interface=$dhcp_interface +save_cfg + +# Mounting installation source +SOURCE=/tmp/source +FS=/tmp/fs + +echo +mkdir -p ${SOURCE} +mkdir -p ${FS} + +if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then + mount /dev/disk/by-uuid/will_be_substituted_with_actual_uuid ${FS} + mount -o loop ${FS}/nailgun.iso ${SOURCE} +fi + +# Copying Repo to the nailgun /var/www directory +repodir="/var/www/nailgun" +mkdir -p ${repodir}/centos/fuelweb/x86_64 +cp -r ${SOURCE}/images ${repodir}/centos/fuelweb/x86_64 +cp -r ${SOURCE}/isolinux ${repodir}/centos/fuelweb/x86_64 +cp -r ${SOURCE}/repodata ${repodir}/centos/fuelweb/x86_64 +cp -r ${SOURCE}/Packages ${repodir}/centos/fuelweb/x86_64 +cp ${SOURCE}/.treeinfo ${repodir}/centos/fuelweb/x86_64 + +# Copying Ubuntu files +mkdir -p ${repodir}/ubuntu/fuelweb/x86_64/images +cp -r ${SOURCE}/ubuntu/conf ${repodir}/ubuntu/fuelweb/x86_64 +cp -r ${SOURCE}/ubuntu/db ${repodir}/ubuntu/fuelweb/x86_64 +cp -r ${SOURCE}/ubuntu/dists ${repodir}/ubuntu/fuelweb/x86_64 +cp -r ${SOURCE}/ubuntu/indices ${repodir}/ubuntu/fuelweb/x86_64 +cp -r ${SOURCE}/ubuntu/pool ${repodir}/ubuntu/fuelweb/x86_64 +cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/linux ${repodir}/ubuntu/fuelweb/x86_64/images +cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/initrd.gz ${repodir}/ubuntu/fuelweb/x86_64/images + +# Copying bootstrap image +mkdir -p ${repodir}/bootstrap +cp -r ${SOURCE}/bootstrap/initramfs.img ${repodir}/bootstrap +cp -r ${SOURCE}/bootstrap/linux ${repodir}/bootstrap + +mkdir -p /root/.ssh +chmod 700 /root/.ssh +cp ${SOURCE}/bootstrap/bootstrap.rsa /root/.ssh +chmod 600 /root/.ssh/bootstrap.rsa + +# Unpacking puppet manifests for master and slave +cp ${SOURCE}/puppet-slave.tgz ${repodir}/ +tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/modules +mkdir -p /etc/puppet/manifests/ +cp /etc/puppet/modules/osnailyfacter/examples/site.pp /etc/puppet/manifests/site.pp +cp ${SOURCE}/centos-versions.yaml ${SOURCE}/ubuntu-versions.yaml /etc/puppet/manifests/ +cp ${SOURCE}/send2syslog.py /bin/send2syslog.py +mkdir -p /var/lib/hiera +touch /var/lib/hiera/common.yaml /etc/puppet/hiera.yaml + +# Deploy docker images and ctl tools if we built ISO with docker containers support +[ -d "${SOURCE}/docker" ] && cp -r ${SOURCE}/docker ${repodir}/docker + +# Prepare local repository specification +rm /etc/yum.repos.d/CentOS*.repo +cat > /etc/yum.repos.d/nailgun.repo << EOF +[nailgun] +name=Nailgun Local Repo +baseurl=file:/var/www/nailgun/centos/fuelweb/x86_64 +gpgcheck=0 +EOF + +# Disable subscription-manager plugins +sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/product-id.conf || : +sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/subscription-manager.conf || : + +# Disable GSSAPI in ssh server config +sed -i -e "/^\s*GSSAPICleanupCredentials yes/d" -e "/^\s*GSSAPIAuthentication yes/d" /etc/ssh/sshd_config + +# Copying bootstrap_admin_node.sh, chmod it and +# adding /etc/init/bootstrap_admin_node.conf +cp ${SOURCE}/bootstrap_admin_node.sh /usr/local/sbin/bootstrap_admin_node.sh +chmod 0777 /usr/local/sbin/bootstrap_admin_node.sh +cp ${SOURCE}/bootstrap_admin_node.conf /etc/init/bootstrap_admin_node.conf +echo "ENABLED=1" > /etc/sysconfig/bootstrap_admin_node + +# Copying version.yaml file. It contains COMMIT_SHA of last commit. +RELEASE=$(awk '/release/{gsub(/"/, "");print $2}' ${SOURCE}/version.yaml) +mkdir -p /etc/nailgun /etc/fuel/${RELEASE} /etc/fuel/release_versions +cp ${SOURCE}/version.yaml /etc/nailgun/version.yaml +cp ${SOURCE}/version.yaml /etc/fuel/${RELEASE}/version.yaml +ln -s /etc/fuel/${RELEASE}/version.yaml /etc/fuel/version.yaml +cp ${SOURCE}/version.yaml /etc/fuel/release_versions/`cat ${SOURCE}/openstack_version`.yaml + +# Generete Fuel UUID +uuidgen > /etc/fuel/fuel-uuid + +###Run fuel menu +[ -z "$showmenu" ] && showmenu="no" +cat > /root/.showfuelmenu << EOF +#Set to yes to run Fuel Setup +#Set to no to accept default settings +showmenu=$showmenu +EOF + +# Prepare custom /etc/issue logon banner and script for changing IP in it +cat > /etc/issue << EOF +######################################### +# Welcome to the Fuel server # +######################################### +Server is running on \m platform + +Fuel UI is available on: +http://:8000 + +Default administrator login: root +Default administrator password: r00tme + +Default Fuel UI login: admin +Default Fuel UI password: admin + +Please change root password on first login. + +EOF + + +cat >> '/etc/rc.local' << EOF +first=yes +for ip in \$(ip -o -4 addr | grep "eth." | awk '{print \$4 }' | cut -d/ -f1); do +if [ "\$first" = "yes" ]; then + ipstr="Fuel UI is available on: http://\$ip:8000" + first=no +else + ipstr=\$(printf "%s\n%51s" "\$ipstr" "http://\$ip:8000") +fi +done +tmpissue=\$(mktemp) +while read -r line; do + if [[ "\$line" =~ "Fuel UI is available on" ]]; then + echo -e "\$ipstr" >> \$tmpissue + elif [[ "\$line" =~ :8000$ ]]; then + : + else + echo -e "\$line" >> \$tmpissue + fi +done < /etc/issue +mv "\$tmpissue" /etc/issue + +EOF + +######### OPNFV addition BEGIN ############ +# Copy data into /opt/opnfv +# TODO: This ought to be a package instead! +mkdir -p /opt/opnfv +cp -r ${SOURCE}/opnfv /opt +######### OPNFV addition END ############ + +# Unmounting source +umount -f ${SOURCE} +rm -rf ${SOURCE} + +umount -f ${FS} || true +rm -rf ${FS} + +# Enabling/configuring NTPD and ntpdate services +echo "server 127.127.1.0" >> /etc/ntp.conf +echo "fudge 127.127.1.0 stratum 10" >> /etc/ntp.conf +echo "tos orphan 7" >> /etc/ntp.conf + +# Do not show error message on ntpdate failure. Customers should not be confused +# if admin node does not have access to the internet time servers. +sed -i /etc/rc.d/init.d/ntpdate -e 's/\([ $RETVAL -eq 0 ] && success || \)failure/\1success/' + +# Disabling splash +sed -i --follow-symlinks -e '/^\skernel/ s/rhgb//' /etc/grub.conf +sed -i --follow-symlinks -e '/^\skernel/ s/quiet//' /etc/grub.conf + +# Disabling console clearing +sed -i 's/getty/getty --noclear/' /etc/init/tty.conf + +# Disabling starting first console from start-ttys service +sed -i --follow-symlinks -e 's/ACTIVE_CONSOLES=.*/ACTIVE_CONSOLES=\/dev\/tty\[2-6\]/' /etc/sysconfig/init + +# Copying default bash settings to the root directory +cp -f /etc/skel/.bash* /root/ + +# Blacklist i2c_piix4 module for VirtualBox so it does not create kernel errors +[[ $(virt-what) = "virtualbox" ]] && echo "blacklist i2c_piix4" > /etc/modprobe.d/blacklist-i2c-piix4.conf + +%end |