diff options
Diffstat (limited to 'foreman')
| -rw-r--r-- | foreman/ci/Vagrantfile | 7 | ||||
| -rwxr-xr-x | foreman/ci/deploy.sh | 430 | ||||
| -rw-r--r-- | foreman/ci/opnfv_ksgen_settings.yml | 5 | ||||
| -rw-r--r-- | foreman/ci/opnfv_ksgen_settings_no_HA.yml | 264 | ||||
| -rwxr-xr-x | foreman/ci/vm_nodes_provision.sh | 50 |
5 files changed, 654 insertions, 102 deletions
diff --git a/foreman/ci/Vagrantfile b/foreman/ci/Vagrantfile index 100e12d..a01da70 100644 --- a/foreman/ci/Vagrantfile +++ b/foreman/ci/Vagrantfile @@ -41,6 +41,9 @@ Vagrant.configure(2) do |config| default_gw = "" nat_flag = false + # Disable dhcp flag + disable_dhcp_flag = false + # Share an additional folder to the guest VM. The first argument is # the path on the host to the actual folder. The second argument is # the path on the guest to mount the folder. And the optional third @@ -90,4 +93,8 @@ Vagrant.configure(2) do |config| config.vm.provision :shell, path: "nat_setup.sh" end config.vm.provision :shell, path: "bootstrap.sh" + if disable_dhcp_flag + config.vm.provision :shell, :inline => "systemctl stop dhcpd" + config.vm.provision :shell, :inline => "systemctl disable dhcpd" + end end diff --git a/foreman/ci/deploy.sh b/foreman/ci/deploy.sh index 46ba80e..2ccb64b 100755 --- a/foreman/ci/deploy.sh +++ b/foreman/ci/deploy.sh @@ -25,6 +25,9 @@ red=`tput setaf 1` green=`tput setaf 2` declare -A interface_arr +declare -A controllers_ip_arr +declare -A admin_ip_arr +declare -A public_ip_arr ##END VARS ##FUNCTIONS @@ -35,6 +38,9 @@ display_usage() { echo -e "\n -no_parse : No variable parsing into config. Flag. \n" echo -e "\n -base_config : Full path of settings file to parse. Optional. Will provide a new base settings file rather than the default. Example: -base_config /opt/myinventory.yml \n" echo -e "\n -virtual : Node virtualization instead of baremetal. Flag. \n" + echo -e "\n -enable_virtual_dhcp : Run dhcp server instead of using static IPs. Use this with -virtual only. \n" + echo -e "\n -static_ip_range : static IP range to define when using virtual and when dhcp is not being used (default), must at least a 20 IP block. Format: '192.168.1.1,192.168.1.20' \n" + echo -e "\n -ping_site : site to use to verify IP connectivity from the VM when -virtual is used. Format: -ping_site www.blah.com \n" } ##find ip of interface @@ -178,12 +184,39 @@ parse_cmdline() { virtual="TRUE" shift 1 ;; + -enable_virtual_dhcp) + enable_virtual_dhcp="TRUE" + shift 1 + ;; + -static_ip_range) + static_ip_range=$2 + shift 2 + ;; + -ping_site) + ping_site=$2 + shift 2 + ;; *) display_usage exit 1 ;; esac done + + if [ ! -z "$enable_virtual_dhcp" ] && [ ! -z "$static_ip_range" ]; then + echo -e "\n\n${red}ERROR: Incorrect Usage. Static IP range cannot be set when using DHCP!. Exiting${reset}\n\n" + exit 1 + fi + + if [ -z "$virtual" ]; then + if [ ! -z "$enable_virtual_dhcp" ]; then + echo -e "\n\n${red}ERROR: Incorrect Usage. enable_virtual_dhcp can only be set when using -virtual!. Exiting${reset}\n\n" + exit 1 + elif [ ! -z "$static_ip_range" ]; then + echo -e "\n\n${red}ERROR: Incorrect Usage. static_ip_range can only be set when using -virtual!. Exiting${reset}\n\n" + exit 1 + fi + fi } ##disable selinux @@ -253,7 +286,7 @@ EOM ##install Ansible using yum ##params: none -##usage: install_anible() +##usage: install_ansible() install_ansible() { if ! yum list installed | grep -i ansible; then if ! yum -y install ansible-1*; then @@ -317,7 +350,7 @@ clone_bgs() { fi } -##validates the netork settings and update VagrantFile with network settings +##validates the network settings and update VagrantFile with network settings ##params: none ##usage: configure_network() configure_network() { @@ -333,52 +366,101 @@ configure_network() { exit 1 fi - ##find number of interfaces with ip and substitute in VagrantFile - if_counter=0 - for interface in ${output}; do + ##virtual we only find 1 interface + if [ $virtual ]; then + ##find interface with default gateway + this_default_gw=$(ip route | grep default | awk '{print $3}') + echo "${blue}Default Gateway: $this_default_gw ${reset}" + this_default_gw_interface=$(ip route get $this_default_gw | awk '{print $3}') - if [ "$if_counter" -ge 4 ]; then - break - fi - interface_ip=$(find_ip $interface) + ##find interface IP, make sure its valid + interface_ip=$(find_ip $this_default_gw_interface) if [ ! "$interface_ip" ]; then - continue + echo "${red}Interface ${this_default_gw_interface} does not have an IP: $interface_ip ! Exiting ${reset}" + exit 1 fi - new_ip=$(next_usable_ip $interface_ip) - if [ ! "$new_ip" ]; then - continue + + ##set variable info + if [ ! -z "$static_ip_range" ]; then + new_ip=$(echo $static_ip_range | cut -d , -f1) + else + new_ip=$(next_usable_ip $interface_ip) + if [ ! "$new_ip" ]; then + echo "${red} Cannot find next IP on interface ${this_default_gw_interface} new_ip: $new_ip ! Exiting ${reset}" + exit 1 + fi fi - interface_arr[$interface]=$if_counter - interface_ip_arr[$if_counter]=$new_ip + interface=$this_default_gw_interface + public_interface=$interface + interface_arr[$interface]=2 + interface_ip_arr[2]=$new_ip subnet_mask=$(find_netmask $interface) - if [ "$if_counter" -eq 1 ]; then - private_subnet_mask=$subnet_mask - private_short_subnet_mask=$(find_short_netmask $interface) - fi - if [ "$if_counter" -eq 2 ]; then - public_subnet_mask=$subnet_mask - public_short_subnet_mask=$(find_short_netmask $interface) - fi - if [ "$if_counter" -eq 3 ]; then - storage_subnet_mask=$subnet_mask - fi - sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile - ((if_counter++)) - done + public_subnet_mask=$subnet_mask + public_short_subnet_mask=$(find_short_netmask $interface) + ##set that interface to be public + sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile + if_counter=1 + else + ##find number of interfaces with ip and substitute in VagrantFile + if_counter=0 + for interface in ${output}; do + + if [ "$if_counter" -ge 4 ]; then + break + fi + interface_ip=$(find_ip $interface) + if [ ! "$interface_ip" ]; then + continue + fi + new_ip=$(next_usable_ip $interface_ip) + if [ ! "$new_ip" ]; then + continue + fi + interface_arr[$interface]=$if_counter + interface_ip_arr[$if_counter]=$new_ip + subnet_mask=$(find_netmask $interface) + if [ "$if_counter" -eq 0 ]; then + admin_subnet_mask=$subnet_mask + elif [ "$if_counter" -eq 1 ]; then + private_subnet_mask=$subnet_mask + private_short_subnet_mask=$(find_short_netmask $interface) + elif [ "$if_counter" -eq 2 ]; then + public_subnet_mask=$subnet_mask + public_short_subnet_mask=$(find_short_netmask $interface) + elif [ "$if_counter" -eq 3 ]; then + storage_subnet_mask=$subnet_mask + else + echo "${red}ERROR: interface counter outside valid range of 0 to 3: $if_counter ! ${reset}" + exit 1 + fi + sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile + ((if_counter++)) + done + fi ##now remove interface config in Vagrantfile for 1 node ##if 1, 3, or 4 interfaces set deployment type ##if 2 interfaces remove 2nd interface and set deployment type - if [ "$if_counter" == 1 ]; then - deployment_type="single_network" - remove_vagrant_network eth_replace1 - remove_vagrant_network eth_replace2 - remove_vagrant_network eth_replace3 - elif [ "$if_counter" == 2 ]; then - deployment_type="single_network" - second_interface=`echo $output | awk '{print $2}'` - remove_vagrant_network $second_interface - remove_vagrant_network eth_replace2 + if [[ "$if_counter" == 1 || "$if_counter" == 2 ]]; then + if [ $virtual ]; then + deployment_type="single_network" + echo "${blue}Single network detected for Virtual deployment...converting to three_network with internal networks! ${reset}" + private_internal_ip=155.1.2.2 + admin_internal_ip=156.1.2.2 + private_subnet_mask=255.255.255.0 + private_short_subnet_mask=/24 + interface_ip_arr[1]=$private_internal_ip + interface_ip_arr[0]=$admin_internal_ip + admin_subnet_mask=255.255.255.0 + admin_short_subnet_mask=/24 + sed -i 's/^.*eth_replace1.*$/ config.vm.network "private_network", virtualbox__intnet: "my_private_network", ip: '\""$private_internal_ip"\"', netmask: '\""$private_subnet_mask"\"'/' Vagrantfile + sed -i 's/^.*eth_replace0.*$/ config.vm.network "private_network", virtualbox__intnet: "my_admin_network", ip: '\""$admin_internal_ip"\"', netmask: '\""$private_subnet_mask"\"'/' Vagrantfile + remove_vagrant_network eth_replace3 + deployment_type=three_network + else + echo "${blue}Single network or 2 network detected for baremetal deployment. This is unsupported! Exiting. ${reset}" + exit 1 + fi elif [ "$if_counter" == 3 ]; then deployment_type="three_network" remove_vagrant_network eth_replace3 @@ -388,6 +470,28 @@ configure_network() { echo "${blue}Network detected: ${deployment_type}! ${reset}" + if [ $virtual ]; then + if [ -z "$enable_virtual_dhcp" ]; then + sed -i 's/^.*disable_dhcp_flag =.*$/ disable_dhcp_flag = true/' Vagrantfile + if [ $static_ip_range ]; then + ##verify static range is at least 20 IPs + static_ip_range_begin=$(echo $static_ip_range | cut -d , -f1) + static_ip_range_end=$(echo $static_ip_range | cut -d , -f2) + ##verify range is at least 20 ips + ##assumes less than 255 range pool + begin_octet=$(echo $static_ip_range_begin | cut -d . -f4) + end_octet=$(echo $static_ip_range_end | cut -d . -f4) + ip_count=$((end_octet-begin_octet+1)) + if [ "$ip_count" -lt 20 ]; then + echo "${red}Static range is less than 20 ips: ${ip_count}, exiting ${reset}" + exit 1 + else + echo "${blue}Static IP range is size $ip_count ${reset}" + fi + fi + fi + fi + if route | grep default; then echo "${blue}Default Gateway Detected ${reset}" host_default_gw=$(ip route | grep default | awk '{print $3}') @@ -476,17 +580,56 @@ configure_network() { ##required for controllers_ip_array global param next_private_ip=${interface_ip_arr[1]} type=_private + control_count=0 for node in controller1 controller2 controller3; do next_private_ip=$(next_usable_ip $next_private_ip) if [ ! "$next_private_ip" ]; then - printf '%s\n' 'deploy.sh: Unable to find next ip for private network for control nodes' >&2 - exit 1 + printf '%s\n' 'deploy.sh: Unable to find next ip for private network for control nodes' >&2 + exit 1 fi sed -i 's/'"$node$type"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml controller_ip_array=$controller_ip_array$next_private_ip, + controllers_ip_arr[$control_count]=$next_private_ip + ((control_count++)) done - ##replace global param for contollers_ip_array + next_public_ip=${interface_ip_arr[2]} + foreman_ip=$next_public_ip + + ##if no dhcp, find all the Admin IPs for nodes in advance + if [ $virtual ]; then + if [ -z "$enable_virtual_dhcp" ]; then + sed -i 's/^.*no_dhcp:.*$/no_dhcp: true/' opnfv_ksgen_settings.yml + nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'` + compute_nodes=`echo $nodes | tr " " "\n" | grep -v controller | tr "\n" " "` + controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "` + nodes=${controller_nodes}${compute_nodes} + next_admin_ip=${interface_ip_arr[0]} + type=_admin + for node in ${nodes}; do + next_admin_ip=$(next_ip $next_admin_ip) + if [ ! "$next_admin_ip" ]; then + echo "${red} Unable to find an unused IP in admin_network for $node ! ${reset}" + exit 1 + else + admin_ip_arr[$node]=$next_admin_ip + sed -i 's/'"$node$type"'/'"$next_admin_ip"'/g' opnfv_ksgen_settings.yml + fi + done + + ##allocate node public IPs + for node in ${nodes}; do + next_public_ip=$(next_usable_ip $next_public_ip) + if [ ! "$next_public_ip" ]; then + echo "${red} Unable to find an unused IP in admin_network for $node ! ${reset}" + exit 1 + else + public_ip_arr[$node]=$next_public_ip + fi + done + fi + fi + ##replace global param for controllers_ip_array controller_ip_array=${controller_ip_array%?} sed -i 's/^.*controllers_ip_array:.*$/ controllers_ip_array: '"$controller_ip_array"'/' opnfv_ksgen_settings.yml @@ -495,28 +638,49 @@ configure_network() { ##therefore we increment the ip by 10 to make sure we have a safe buffer next_private_ip=$(increment_ip $next_private_ip 10) - grep -E '*private_vip|loadbalancer_vip|db_vip|amqp_vip|*admin_vip' opnfv_ksgen_settings.yml | while read -r line ; do - sed -i 's/^.*'"$line"'.*$/ '"$line $next_private_ip"'/' opnfv_ksgen_settings.yml - next_private_ip=$(next_usable_ip $next_private_ip) - if [ ! "$next_private_ip" ]; then - printf '%s\n' 'deploy.sh: Unable to find next ip for private network for vip replacement' >&2 - exit 1 + private_output=$(grep -E '*private_vip|loadbalancer_vip|db_vip|amqp_vip|*admin_vip' opnfv_ksgen_settings.yml) + if [ ! -z "$private_output" ]; then + while read -r line; do + sed -i 's/^.*'"$line"'.*$/ '"$line $next_private_ip"'/' opnfv_ksgen_settings.yml + next_private_ip=$(next_usable_ip $next_private_ip) + if [ ! "$next_private_ip" ]; then + printf '%s\n' 'deploy.sh: Unable to find next ip for private network for vip replacement' >&2 + exit 1 fi - done + done <<< "$private_output" + fi + + ##replace odl_control_ip (non-HA only) + odl_control_ip=${controllers_ip_arr[0]} + sed -i 's/^.*odl_control_ip:.*$/ odl_control_ip: '"$odl_control_ip"'/' opnfv_ksgen_settings.yml + + ##replace controller_ip (non-HA only) + sed -i 's/^.*controller_ip:.*$/ controller_ip: '"$odl_control_ip"'/' opnfv_ksgen_settings.yml ##replace foreman site - next_public_ip=${interface_ip_arr[2]} - sed -i 's/^.*foreman_url:.*$/ foreman_url:'" https:\/\/$next_public_ip"'\/api\/v2\//' opnfv_ksgen_settings.yml + sed -i 's/^.*foreman_url:.*$/ foreman_url:'" https:\/\/$foreman_ip"'\/api\/v2\//' opnfv_ksgen_settings.yml ##replace public vips - next_public_ip=$(increment_ip $next_public_ip 10) - grep -E '*public_vip' opnfv_ksgen_settings.yml | while read -r line ; do - sed -i 's/^.*'"$line"'.*$/ '"$line $next_public_ip"'/' opnfv_ksgen_settings.yml + ##no need to do this if virtual and no dhcp + if [ ! -z "$enable_virtual_dhcp" ]; then + next_public_ip=$(increment_ip $next_public_ip 10) + else next_public_ip=$(next_usable_ip $next_public_ip) - if [ ! "$next_public_ip" ]; then - printf '%s\n' 'deploy.sh: Unable to find next ip for public network for vip replcement' >&2 - exit 1 - fi - done + fi + + public_output=$(grep -E '*public_vip' opnfv_ksgen_settings.yml) + if [ ! -z "$public_output" ]; then + while read -r line; do + if echo $line | grep horizon_public_vip; then + horizon_public_vip=$next_public_ip + fi + sed -i 's/^.*'"$line"'.*$/ '"$line $next_public_ip"'/' opnfv_ksgen_settings.yml + next_public_ip=$(next_usable_ip $next_public_ip) + if [ ! "$next_public_ip" ]; then + printf '%s\n' 'deploy.sh: Unable to find next ip for public network for vip replcement' >&2 + exit 1 + fi + done <<< "$public_output" + fi ##replace public_network param public_subnet=$(find_subnet $next_public_ip $public_subnet_mask) @@ -555,9 +719,27 @@ configure_network() { ##to neutron to use as floating IPs ##we should control this subnet, so this range should work .150-200 ##but generally this is a bad idea and we are assuming at least a /24 subnet here + ##if static ip range, then we take the difference of the end range and current ip + ## to be the allocation pool public_subnet=$(find_subnet $next_public_ip $public_subnet_mask) - public_allocation_start=$(increment_subnet $public_subnet 150) - public_allocation_end=$(increment_subnet $public_subnet 200) + if [ ! -z "$static_ip_range" ]; then + begin_octet=$(echo $next_public_ip | cut -d . -f4) + end_octet=$(echo $static_ip_range_end | cut -d . -f4) + ip_diff=$((end_octet-begin_octet)) + if [ $ip_diff -le 0 ]; then + echo "${red}ip range left for floating range is less than or equal to 0! $ipdiff ${reset}" + exit 1 + else + public_allocation_start=$(next_ip $next_public_ip) + public_allocation_end=$static_ip_range_end + echo "${blue}Neutron Floating IP range: $public_allocation_start to $public_allocation_end ${reset}" + fi + else + public_allocation_start=$(increment_subnet $public_subnet 150) + public_allocation_end=$(increment_subnet $public_subnet 200) + echo "${blue}Neutron Floating IP range: $public_allocation_start to $public_allocation_end ${reset}" + echo "${blue}Foreman VM is up! ${reset}" + fi sed -i 's/^.*public_allocation_start:.*$/ public_allocation_start:'" $public_allocation_start"'/' opnfv_ksgen_settings.yml sed -i 's/^.*public_allocation_end:.*$/ public_allocation_end:'" $public_allocation_end"'/' opnfv_ksgen_settings.yml @@ -582,7 +764,7 @@ configure_virtual() { fi } -##Starts for forement VM with Vagrant +##Starts Foreman VM with Vagrant ##params: none ##usage: start_vagrant() start_foreman() { @@ -597,11 +779,11 @@ start_foreman() { fi } -##start the VM if this is a virtual installaion +##start the VM if this is a virtual installation ##this function does nothing if baremetal servers are being used ##params: none ##usage: start_virtual_nodes() -start_virutal_nodes() { +start_virtual_nodes() { if [ $virtual ]; then ##Bring up VM nodes @@ -613,6 +795,8 @@ start_virutal_nodes() { compute_nodes=`echo $nodes | tr " " "\n" | grep -v controller | tr "\n" " "` controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "` nodes=${controller_nodes}${compute_nodes} + controller_count=0 + compute_wait_completed=false for node in ${nodes}; do cd /tmp @@ -622,7 +806,7 @@ start_virutal_nodes() { ##clone bgs vagrant ##will change this to be opnfv repo when commit is done - if ! git clone -b v1.0 https://github.com/trozet/bgs_vagrant.git $node; then + if ! git clone https://github.com/trozet/bgs_vagrant.git $node; then printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2 exit 1 fi @@ -631,7 +815,7 @@ start_virutal_nodes() { if [ $base_config ]; then if ! cp -f $base_config opnfv_ksgen_settings.yml; then - echo "{red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}" + echo "${red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}" exit 1 fi fi @@ -642,6 +826,13 @@ start_virutal_nodes() { node_type=config_nodes_${node}_type node_type=$(eval echo \$$node_type) + ##trozet test make compute nodes wait 20 minutes + if [ "$compute_wait_completed" = false ] && [ "$node_type" != "controller" ]; then + echo "${blue}Waiting 20 minutes for Control nodes to install before continuing with Compute nodes..." + compute_wait_completed=true + sleep 1400 + fi + ##find number of interfaces with ip and substitute in VagrantFile output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'` @@ -650,11 +841,14 @@ start_virutal_nodes() { exit 1 fi - if_counter=0 for interface in ${output}; do - if [ "$if_counter" -ge 4 ]; then + if [ -z "$enable_virtual_dhcp" ]; then + if [ "$if_counter" -ge 1 ]; then + break + fi + elif [ "$if_counter" -ge 4 ]; then break fi interface_ip=$(find_ip $interface) @@ -690,30 +884,66 @@ start_virutal_nodes() { mac_addr=$(echo $mac_addr | sed 's/:\|-//g') ;; esac - sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", bridge: '\'"$interface"\'', :mac => '\""$mac_addr"\"'/' Vagrantfile - ((if_counter++)) + this_admin_ip=${admin_ip_arr[$node]} + sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "private_network", virtualbox__intnet: "my_admin_network", ip: '\""$this_admin_ip"\"', netmask: '\""$admin_subnet_mask"\"', :mac => '\""$mac_addr"\"'/' Vagrantfile + ((if_counter++)) done - ##now remove interface config in Vagrantfile for 1 node ##if 1, 3, or 4 interfaces set deployment type ##if 2 interfaces remove 2nd interface and set deployment type - if [ "$if_counter" == 1 ]; then + if [[ "$if_counter" == 1 || "$if_counter" == 2 ]]; then deployment_type="single_network" - remove_vagrant_network eth_replace1 - remove_vagrant_network eth_replace2 + if [ "$node_type" == "controller" ]; then + mac_string=config_nodes_${node}_private_mac + mac_addr=$(eval echo \$$mac_string) + if [ $mac_addr == "" ]; then + echo "${red} Unable to find private_mac for $node! ${reset}" + exit 1 + fi + else + ##generate random mac + mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"') + fi + mac_addr=$(echo $mac_addr | sed 's/:\|-//g') + if [ "$node_type" == "controller" ]; then + new_node_ip=${controllers_ip_arr[$controller_count]} + if [ ! "$new_node_ip" ]; then + echo "{red}ERROR: Empty node ip for controller $controller_count ${reset}" + exit 1 + fi + ((controller_count++)) + else + next_private_ip=$(next_ip $next_private_ip) + if [ ! "$next_private_ip" ]; then + echo "{red}ERROR: Could not find private ip for $node ${reset}" + exit 1 + fi + new_node_ip=$next_private_ip + fi + sed -i 's/^.*eth_replace1.*$/ config.vm.network "private_network", virtualbox__intnet: "my_private_network", :mac => '\""$mac_addr"\"', ip: '\""$new_node_ip"\"', netmask: '\""$private_subnet_mask"\"'/' Vagrantfile + ##replace host_ip in vm_nodes_provision with private ip + sed -i 's/^host_ip=REPLACE/host_ip='$new_node_ip'/' vm_nodes_provision.sh + ##replace ping site + if [ ! -z "$ping_site" ]; then + sed -i 's/www.google.com/'$ping_site'/' vm_nodes_provision.sh + fi + ##find public ip info + mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"') + mac_addr=$(echo $mac_addr | sed 's/:\|-//g') + this_public_ip=${public_ip_arr[$node]} + + if [ -z "$enable_virtual_dhcp" ]; then + sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", bridge: '\'"$public_interface"\'', :mac => '\""$mac_addr"\"', ip: '\""$this_public_ip"\"', netmask: '\""$public_subnet_mask"\"'/' Vagrantfile + else + sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", bridge: '\'"$public_interface"\'', :mac => '\""$mac_addr"\"'/' Vagrantfile + fi remove_vagrant_network eth_replace3 - elif [ "$if_counter" == 2 ]; then - deployment_type="single_network" - second_interface=`echo $output | awk '{print $2}'` - remove_vagrant_network $second_interface - remove_vagrant_network eth_replace2 elif [ "$if_counter" == 3 ]; then deployment_type="three_network" remove_vagrant_network eth_replace3 else deployment_type="multi_network" fi - ##modify provisioning to do puppet install, config, and foreman check-in ##substitute host_name and dns_server in the provisioning script host_string=config_nodes_${node}_hostname @@ -721,19 +951,17 @@ start_virutal_nodes() { sed -i 's/^host_name=REPLACE/host_name='$host_name'/' vm_nodes_provision.sh ##dns server should be the foreman server sed -i 's/^dns_server=REPLACE/dns_server='${interface_ip_arr[0]}'/' vm_nodes_provision.sh - ## remove bootstrap and NAT provisioning sed -i '/nat_setup.sh/d' Vagrantfile sed -i 's/bootstrap.sh/vm_nodes_provision.sh/' Vagrantfile - ## modify default_gw to be node_default_gw sed -i 's/^.*default_gw =.*$/ default_gw = '\""$node_default_gw"\"'/' Vagrantfile - ## modify VM memory to be 4gig - sed -i 's/^.*vb.memory =.*$/ vb.memory = 4096/' Vagrantfile - + ##if node type is controller + if [ "$node_type" == "controller" ]; then + sed -i 's/^.*vb.memory =.*$/ vb.memory = 4096/' Vagrantfile + fi echo "${blue}Starting Vagrant Node $node! ${reset}" - ##stand up vagrant if ! vagrant up; then echo "${red} Unable to start $node ${reset}" @@ -741,11 +969,33 @@ start_virutal_nodes() { else echo "${blue} $node VM is up! ${reset}" fi - done - echo "${blue} All VMs are UP! ${reset}" - + echo "${blue} Waiting for puppet to complete on the nodes... ${reset}" + ##check puppet is complete + ##ssh into foreman server, run check to verify puppet is complete + pushd /tmp/bgs_vagrant + if ! vagrant ssh -c "/opt/khaleesi/run.sh --no-logs --use /vagrant/opnfv_ksgen_settings.yml /opt/khaleesi/playbooks/validate_opnfv-vm.yml"; then + echo "${red} Failed to validate puppet completion on nodes ${reset}" + exit 1 + else + echo "{$blue} Puppet complete on all nodes! ${reset}" + fi + popd + ##add routes back to nodes + for node in ${nodes}; do + pushd /tmp/$node + if ! vagrant ssh -c "route | grep default | grep $this_default_gw"; then + echo "${blue} Adding public route back to $node! ${reset}" + vagrant ssh -c "route add default gw $this_default_gw" + fi + popd + done + if [ ! -z "$horizon_public_vip" ]; then + echo "${blue} Virtual deployment SUCCESS!! Foreman URL: http://${foreman_ip}, Horizon URL: http://${horizon_public_vip} ${reset}" + else + echo "${blue} Virtual deployment SUCCESS!! Foreman URL: http://${foreman_ip}, Horizon URL: http://${odl_control_ip} ${reset}" + fi fi } @@ -763,7 +1013,7 @@ main() { configure_network configure_virtual start_foreman - start_virutal_nodes + start_virtual_nodes } main "$@" diff --git a/foreman/ci/opnfv_ksgen_settings.yml b/foreman/ci/opnfv_ksgen_settings.yml index 21840dd..b41a41b 100644 --- a/foreman/ci/opnfv_ksgen_settings.yml +++ b/foreman/ci/opnfv_ksgen_settings.yml @@ -44,6 +44,7 @@ global_params: deployment_type: network_type: multi_network default_gw: +no_dhcp: false foreman: seed_values: - { name: heat_cfn, oldvalue: true, newvalue: false } @@ -110,6 +111,7 @@ nodes: bmc_mac: "10:23:45:67:88:AB" bmc_user: root bmc_pass: root + admin_ip: compute_admin ansible_ssh_pass: "Op3nStack" admin_password: "" groups: @@ -130,6 +132,7 @@ nodes: bmc_mac: "10:23:45:67:88:AC" bmc_user: root bmc_pass: root + admin_ip: controller1_admin private_ip: controller1_private private_mac: "10:23:45:67:87:AC" ansible_ssh_pass: "Op3nStack" @@ -152,6 +155,7 @@ nodes: bmc_mac: "10:23:45:67:88:AD" bmc_user: root bmc_pass: root + admin_ip: controller2_admin private_ip: controller2_private private_mac: "10:23:45:67:87:AD" ansible_ssh_pass: "Op3nStack" @@ -174,6 +178,7 @@ nodes: bmc_mac: "10:23:45:67:88:AE" bmc_user: root bmc_pass: root + admin_ip: controller3_admin private_ip: controller3_private private_mac: "10:23:45:67:87:AE" ansible_ssh_pass: "Op3nStack" diff --git a/foreman/ci/opnfv_ksgen_settings_no_HA.yml b/foreman/ci/opnfv_ksgen_settings_no_HA.yml new file mode 100644 index 0000000..79db257 --- /dev/null +++ b/foreman/ci/opnfv_ksgen_settings_no_HA.yml @@ -0,0 +1,264 @@ +global_params: + admin_email: opnfv@opnfv.com + ha_flag: "false" + odl_flag: "true" + odl_control_ip: + private_network: + storage_network: + public_network: + private_subnet: + deployment_type: + controller_ip: +network_type: multi_network +default_gw: +no_dhcp: false +foreman: + seed_values: + - { name: heat_cfn, oldvalue: true, newvalue: false } +workaround_puppet_version_lock: false +opm_branch: master +installer: + name: puppet + short_name: pupt + network: + auto_assign_floating_ip: false + variant: + short_name: m2vx + plugin: + name: neutron +workaround_openstack_packstack_rpm: false +tempest: + repo: + Fedora: + '19': http://REPLACE_ME/~REPLACE_ME/openstack-tempest-icehouse/fedora-19/ + '20': http://REPLACE_ME/~REPLACE_ME/openstack-tempest-icehouse/fedora-20/ + RedHat: + '7.0': https://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-7/ + use_virtual_env: false + public_allocation_end: 10.2.84.71 + skip: + files: null + tests: null + public_allocation_start: 10.2.84.51 + physnet: physnet1 + use_custom_repo: false + public_subnet_cidr: 10.2.84.0/24 + public_subnet_gateway: 10.2.84.1 + additional_default_settings: + - section: compute + option: flavor_ref + value: 1 + cirros_image_file: cirros-0.3.1-x86_64-disk.img + setup_method: tempest/rpm + test_name: all + rdo: + version: juno + rpm: http://repos.fedorapeople.org/repos/openstack/openstack-juno/rdo-release-juno-1.noarch.rpm + rpm: + version: 20141201 + dir: ~{{ nodes.tempest.remote_user }}/tempest-dir +tmp: + node_prefix: '{{ node.prefix | reject("none") | join("-") }}-' + anchors: + - https://repos.fedorapeople.org/repos/openstack/openstack-juno/rdo-release-juno-1.noarch.rpm + - http://repos.fedorapeople.org/repos/openstack/openstack-juno/ +opm_repo: https://github.com/redhat-openstack/openstack-puppet-modules.git +workaround_vif_plugging: false +openstack_packstack_rpm: http://REPLACE_ME/brewroot/packages/openstack-puppet-modules/2013.2/9.el6ost/noarch/openstack-puppet-modules-2013.2-9.el6ost.noarch.rpm +nodes: + compute: + name: oscompute11.opnfv.com + hostname: oscompute11.opnfv.com + short_name: oscompute11 + type: compute + host_type: baremetal + hostgroup: Compute + mac_address: "10:23:45:67:89:AB" + bmc_ip: 10.4.17.2 + bmc_mac: "10:23:45:67:88:AB" + bmc_user: root + bmc_pass: root + admin_ip: compute_admin + ansible_ssh_pass: "Op3nStack" + admin_password: "" + groups: + - compute + - foreman_nodes + - puppet + - rdo + - neutron + controller1: + name: oscontroller1.opnfv.com + hostname: oscontroller1.opnfv.com + short_name: oscontroller1 + type: controller + host_type: baremetal + hostgroup: Controller_Network_ODL + mac_address: "10:23:45:67:89:AC" + bmc_ip: 10.4.17.3 + bmc_mac: "10:23:45:67:88:AC" + bmc_user: root + bmc_pass: root + private_ip: controller1_private + admin_ip: controller1_admin + private_mac: "10:23:45:67:87:AC" + ansible_ssh_pass: "Op3nStack" + admin_password: "octopus" + groups: + - controller + - foreman_nodes + - puppet + - rdo + - neutron +workaround_mysql_centos7: true +distro: + name: centos + centos: + '7.0': + repos: [] + short_name: c + short_version: 70 + version: '7.0' + rhel: + '7.0': + kickstart_url: http://REPLACE_ME/released/RHEL-7/7.0/Server/x86_64/os/ + repos: + - section: rhel7-server-rpms + name: Packages for RHEL 7 - $basearch + baseurl: http://REPLACE_ME/rel-eng/repos/rhel-7.0/x86_64/ + gpgcheck: 0 + - section: rhel-7-server-update-rpms + name: Update Packages for Enterprise Linux 7 - $basearch + baseurl: http://REPLACE_ME/rel-eng/repos/rhel-7.0-z/x86_64/ + gpgcheck: 0 + - section: rhel-7-server-optional-rpms + name: Optional Packages for Enterprise Linux 7 - $basearch + baseurl: http://REPLACE_ME/released/RHEL-7/7.0/Server-optional/x86_64/os/ + gpgcheck: 0 + - section: rhel-7-server-extras-rpms + name: Optional Packages for Enterprise Linux 7 - $basearch + baseurl: http://REPLACE_ME/rel-eng/EXTRAS-7.0-RHEL-7-20140610.0/compose/Server/x86_64/os/ + gpgcheck: 0 + '6.5': + kickstart_url: http://REPLACE_ME/released/RHEL-6/6.5/Server/x86_64/os/ + repos: + - section: rhel6.5-server-rpms + name: Packages for RHEL 6.5 - $basearch + baseurl: http://REPLACE_ME.REPLACE_ME/released/RHEL-6/6.5/Server/$basearch/os/Server + gpgcheck: 0 + - section: rhel-6.5-server-update-rpms + name: Update Packages for Enterprise Linux 6.5 - $basearch + baseurl: http://REPLACE_ME.REPLACE_ME/rel-eng/repos/RHEL-6.5-Z/$basearch/ + gpgcheck: 0 + - section: rhel-6.5-server-optional-rpms + name: Optional Packages for Enterprise Linux 6.5 - $basearch + baseurl: http://REPLACE_ME.REPLACE_ME/released/RHEL-6/6.5/Server/optional/$basearch/os + gpgcheck: 0 + - section: rhel6.5-server-rpms-32bit + name: Packages for RHEL 6.5 - i386 + baseurl: http://REPLACE_ME.REPLACE_ME/released/RHEL-6/6.5/Server/i386/os/Server + gpgcheck: 0 + enabled: 1 + - section: rhel-6.5-server-update-rpms-32bit + name: Update Packages for Enterprise Linux 6.5 - i686 + baseurl: http://REPLACE_ME.REPLACE_ME/rel-eng/repos/RHEL-6.5-Z/i686/ + gpgcheck: 0 + enabled: 1 + - section: rhel-6.5-server-optional-rpms-32bit + name: Optional Packages for Enterprise Linux 6.5 - i386 + baseurl: http://REPLACE_ME.REPLACE_ME/released/RHEL-6/6.5/Server/optional/i386/os + gpgcheck: 0 + enabled: 1 + subscription: + username: REPLACE_ME + password: HWj8TE28Qi0eP2c + pool: 8a85f9823e3d5e43013e3ddd4e2a0977 + config: + selinux: permissive + ntp_server: 0.pool.ntp.org + dns_servers: + - 10.4.1.1 + - 10.4.0.2 + reboot_delay: 1 + initial_boot_timeout: 180 +node: + prefix: + - rdo + - pupt + - ffqiotcxz1 + - null +product: + repo_type: production + name: rdo + short_name: rdo + rpm: + CentOS: https://repos.fedorapeople.org/repos/openstack/openstack-juno/rdo-release-juno-1.noarch.rpm + Fedora: https://repos.fedorapeople.org/repos/openstack/openstack-juno/rdo-release-juno-1.noarch.rpm + RedHat: https://repos.fedorapeople.org/repos/openstack/openstack-juno/rdo-release-juno-1.noarch.rpm + short_version: ju + repo: + production: + CentOS: + 7.0.1406: http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-7 + '6.5': http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-6 + '7.0': http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-7 + Fedora: + '20': http://repos.fedorapeople.org/repos/openstack/openstack-juno/fedora-20 + '21': http://repos.fedorapeople.org/repos/openstack/openstack-juno/fedora-21 + RedHat: + '6.6': http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-6 + '6.5': http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-6 + '7.0': http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-7 + version: juno + config: + enable_epel: y + short_repo: prod +tester: + name: tempest +distro_reboot_options: '--no-wall '' Reboot is triggered by Ansible'' ' +job: + verbosity: 1 + archive: + - '{{ tempest.dir }}/etc/tempest.conf' + - '{{ tempest.dir }}/etc/tempest.conf.sample' + - '{{ tempest.dir }}/*.log' + - '{{ tempest.dir }}/*.xml' + - /root/ + - /var/log/ + - /etc/nova + - /etc/ceilometer + - /etc/cinder + - /etc/glance + - /etc/keystone + - /etc/neutron + - /etc/ntp + - /etc/puppet + - /etc/qpid + - /etc/qpidd.conf + - /root + - /etc/yum.repos.d + - /etc/yum.repos.d +topology: + name: multinode + short_name: mt +workaround_neutron_ovs_udev_loop: true +workaround_glance_table_utf8: false +verbosity: + debug: 0 + info: 1 + warning: 2 + warn: 2 + errors: 3 +provisioner: + username: admin + network: + type: nova + name: external + skip: skip_provision + foreman_url: https://10.2.84.2/api/v2/ + password: octopus + type: foreman +workaround_nova_compute_fix: false +workarounds: + enabled: true + diff --git a/foreman/ci/vm_nodes_provision.sh b/foreman/ci/vm_nodes_provision.sh index d0bba64..e64c0ad 100755 --- a/foreman/ci/vm_nodes_provision.sh +++ b/foreman/ci/vm_nodes_provision.sh @@ -18,6 +18,7 @@ green=`tput setaf 2` host_name=REPLACE dns_server=REPLACE +host_ip=REPLACE ##END VARS ##set hostname @@ -31,27 +32,52 @@ if ! grep 'PEERDNS=no' /etc/sysconfig/network-scripts/ifcfg-enp0s3; then systemctl restart NetworkManager fi -if ! ping www.google.com -c 5; then +##modify /etc/resolv.conf to point to foreman +echo "${blue} Configuring resolv.conf with DNS: $dns_server ${reset}" +cat > /etc/resolv.conf << EOF +search ci.com opnfv.com +nameserver $dns_server +nameserver 8.8.8.8 + +EOF + +##modify /etc/hosts to add own IP for rabbitmq workaround +host_short_name=`echo $host_name | cut -d . -f 1` +echo "${blue} Configuring hosts with: $host_name $host_ip ${reset}" +cat > /etc/hosts << EOF +$host_ip $host_short_name $host_name +127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 +::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 +EOF + +if ! ping www.google.com -c 5; then echo "${red} No internet connection, check your route and DNS setup ${reset}" exit 1 fi -# Install EPEL repo for access to many other yum repos -# Major version is pinned to force some consistency for Arno -yum install -y epel-release-7* +##install EPEL +if ! yum repolist | grep "epel/"; then + if ! rpm -Uvh http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-5.noarch.rpm; then + printf '%s\n' 'vm_provision_nodes.sh: Unable to configure EPEL repo' >&2 + exit 1 + fi +else + printf '%s\n' 'vm_nodes_provision.sh: Skipping EPEL repo as it is already configured.' +fi -# Update device-mapper-libs, needed for libvirtd on compute nodes -# Major version is pinned to force some consistency for Arno -if ! yum -y upgrade device-mapper-libs-1*; then +##install device-mapper-libs +##needed for libvirtd on compute nodes +if ! yum -y upgrade device-mapper-libs; then echo "${red} WARN: Unable to upgrade device-mapper-libs...nova-compute may not function ${reset}" fi -# Install other required packages -# Major version is pinned to force some consistency for Arno echo "${blue} Installing Puppet ${reset}" -if ! yum install -y puppet-3*; then - printf '%s\n' 'vm_nodes_provision.sh: failed to install required packages' >&2 - exit 1 +##install puppet +if ! yum list installed | grep -i puppet; then + if ! yum -y install puppet; then + printf '%s\n' 'vm_nodes_provision.sh: Unable to install puppet package' >&2 + exit 1 + fi fi echo "${blue} Configuring puppet ${reset}" |