diff options
author | 2015-06-11 14:13:24 +0800 | |
---|---|---|
committer | 2015-06-16 10:40:49 +0800 | |
commit | 12019717d3be5b4cfa42751cd19cbd42f82bc04a (patch) | |
tree | 66f3c45485439dbd3f26c0c77a079344536cec91 /compass/deploy/ansible/openstack_juno/roles/glance/templates/glance-api.conf | |
parent | eb887812da568cfb4908f6ae14449b2ceaeb5bc0 (diff) |
Add openstack HA installer code with ansible for compass adapter
patch 2: add service monitor and adjust monitor timelen
BGS-25
Change-Id: I4239576b3888a0a7f6b697fe7fffffb677ef7dab
Signed-off-by: baigk <baiguoku@huawei.com>
Diffstat (limited to 'compass/deploy/ansible/openstack_juno/roles/glance/templates/glance-api.conf')
-rw-r--r-- | compass/deploy/ansible/openstack_juno/roles/glance/templates/glance-api.conf | 677 |
1 files changed, 677 insertions, 0 deletions
diff --git a/compass/deploy/ansible/openstack_juno/roles/glance/templates/glance-api.conf b/compass/deploy/ansible/openstack_juno/roles/glance/templates/glance-api.conf new file mode 100644 index 0000000..763539e --- /dev/null +++ b/compass/deploy/ansible/openstack_juno/roles/glance/templates/glance-api.conf @@ -0,0 +1,677 @@ +[DEFAULT] +# Show more verbose log output (sets INFO log level output) +#verbose = False + +# Show debugging output in logs (sets DEBUG log level output) +#debug = False + +# Which backend scheme should Glance use by default is not specified +# in a request to add a new image to Glance? Known schemes are determined +# by the known_stores option below. +# Default: 'file' +# "default_store" option has been moved to [glance_store] section in +# Juno release + +# List of which store classes and store class locations are +# currently known to glance at startup. +# Existing but disabled stores: +# glance.store.rbd.Store, +# glance.store.s3.Store, +# glance.store.swift.Store, +# glance.store.sheepdog.Store, +# glance.store.cinder.Store, +# glance.store.gridfs.Store, +# glance.store.vmware_datastore.Store, +#known_stores = glance.store.filesystem.Store, +# glance.store.http.Store + + +# Maximum image size (in bytes) that may be uploaded through the +# Glance API server. Defaults to 1 TB. +# WARNING: this value should only be increased after careful consideration +# and must be set to a value under 8 EB (9223372036854775808). +#image_size_cap = 1099511627776 + +# Address to bind the API server +bind_host = {{ image_host }} + +# Port the bind the API server to +bind_port = 9292 + +# Log to this file. Make sure you do not set the same log file for both the API +# and registry servers! +# +# If `log_file` is omitted and `use_syslog` is false, then log messages are +# sent to stdout as a fallback. +log_file = /var/log/glance/api.log + +# Backlog requests when creating socket +backlog = 4096 + +# TCP_KEEPIDLE value in seconds when creating socket. +# Not supported on OS X. +#tcp_keepidle = 600 + +# API to use for accessing data. Default value points to sqlalchemy +# package, it is also possible to use: glance.db.registry.api +# data_api = glance.db.sqlalchemy.api + +# Number of Glance API worker processes to start. +# On machines with more than one CPU increasing this value +# may improve performance (especially if using SSL with +# compression turned on). It is typically recommended to set +# this value to the number of CPUs present on your machine. +workers = 1 + +# Maximum line size of message headers to be accepted. +# max_header_line may need to be increased when using large tokens +# (typically those generated by the Keystone v3 API with big service +# catalogs) +# max_header_line = 16384 + +# Role used to identify an authenticated user as administrator +#admin_role = admin + +# Allow unauthenticated users to access the API with read-only +# privileges. This only applies when using ContextMiddleware. +#allow_anonymous_access = False + +# Allow access to version 1 of glance api +#enable_v1_api = True + +# Allow access to version 2 of glance api +#enable_v2_api = True + +# Return the URL that references where the data is stored on +# the backend storage system. For example, if using the +# file system store a URL of 'file:///path/to/image' will +# be returned to the user in the 'direct_url' meta-data field. +# The default value is false. +#show_image_direct_url = False + +# Send headers containing user and tenant information when making requests to +# the v1 glance registry. This allows the registry to function as if a user is +# authenticated without the need to authenticate a user itself using the +# auth_token middleware. +# The default value is false. +#send_identity_headers = False + +# Supported values for the 'container_format' image attribute +#container_formats=ami,ari,aki,bare,ovf,ova + +# Supported values for the 'disk_format' image attribute +#disk_formats=ami,ari,aki,vhd,vmdk,raw,qcow2,vdi,iso + +# Directory to use for lock files. Default to a temp directory +# (string value). This setting needs to be the same for both +# glance-scrubber and glance-api. +#lock_path=<None> + +# Property Protections config file +# This file contains the rules for property protections and the roles/policies +# associated with it. +# If this config value is not specified, by default, property protections +# won't be enforced. +# If a value is specified and the file is not found, then the glance-api +# service will not start. +#property_protection_file = + +# Specify whether 'roles' or 'policies' are used in the +# property_protection_file. +# The default value for property_protection_rule_format is 'roles'. +#property_protection_rule_format = roles + +# Specifies how long (in hours) a task is supposed to live in the tasks DB +# after succeeding or failing before getting soft-deleted. +# The default value for task_time_to_live is 48 hours. +# task_time_to_live = 48 + +# This value sets what strategy will be used to determine the image location +# order. Currently two strategies are packaged with Glance 'location_order' +# and 'store_type'. +#location_strategy = location_order + +# ================= Syslog Options ============================ + +# Send logs to syslog (/dev/log) instead of to file specified +# by `log_file` +#use_syslog = False + +# Facility to use. If unset defaults to LOG_USER. +#syslog_log_facility = LOG_LOCAL0 + +# ================= SSL Options =============================== + +# Certificate file to use when starting API server securely +#cert_file = /path/to/certfile + +# Private key file to use when starting API server securely +#key_file = /path/to/keyfile + +# CA certificate file to use to verify connecting clients +#ca_file = /path/to/cafile + +# ================= Security Options ========================== + +# AES key for encrypting store 'location' metadata, including +# -- if used -- Swift or S3 credentials +# Should be set to a random string of length 16, 24 or 32 bytes +#metadata_encryption_key = <16, 24 or 32 char registry metadata key> + +# ============ Registry Options =============================== + +# Address to find the registry server +registry_host = {{ internal_ip }} + +# Port the registry server is listening on +registry_port = 9191 + +# What protocol to use when connecting to the registry server? +# Set to https for secure HTTP communication +registry_client_protocol = http + +# The path to the key file to use in SSL connections to the +# registry server, if any. Alternately, you may set the +# GLANCE_CLIENT_KEY_FILE environ variable to a filepath of the key file +#registry_client_key_file = /path/to/key/file + +# The path to the cert file to use in SSL connections to the +# registry server, if any. Alternately, you may set the +# GLANCE_CLIENT_CERT_FILE environ variable to a filepath of the cert file +#registry_client_cert_file = /path/to/cert/file + +# The path to the certifying authority cert file to use in SSL connections +# to the registry server, if any. Alternately, you may set the +# GLANCE_CLIENT_CA_FILE environ variable to a filepath of the CA cert file +#registry_client_ca_file = /path/to/ca/file + +# When using SSL in connections to the registry server, do not require +# validation via a certifying authority. This is the registry's equivalent of +# specifying --insecure on the command line using glanceclient for the API +# Default: False +#registry_client_insecure = False + +# The period of time, in seconds, that the API server will wait for a registry +# request to complete. A value of '0' implies no timeout. +# Default: 600 +#registry_client_timeout = 600 + +# Whether to automatically create the database tables. +# Default: False +#db_auto_create = False + +# Enable DEBUG log messages from sqlalchemy which prints every database +# query and response. +# Default: False +#sqlalchemy_debug = True + +# Pass the user's token through for API requests to the registry. +# Default: True +#use_user_token = True + +# If 'use_user_token' is not in effect then admin credentials +# can be specified. Requests to the registry on behalf of +# the API will use these credentials. +# Admin user name +#admin_user = None +# Admin password +#admin_password = None +# Admin tenant name +#admin_tenant_name = None +# Keystone endpoint +#auth_url = None +# Keystone region +#auth_region = None +# Auth strategy +#auth_strategy = keystone + +# ============ Notification System Options ===================== + +# Notifications can be sent when images are create, updated or deleted. +# There are three methods of sending notifications, logging (via the +# log_file directive), rabbit (via a rabbitmq queue), qpid (via a Qpid +# message queue), or noop (no notifications sent, the default) +# NOTE: THIS CONFIGURATION OPTION HAS BEEN DEPRECATED IN FAVOR OF `notification_driver` +# notifier_strategy = default + +# Driver or drivers to handle sending notifications +# notification_driver = noop + +# Default publisher_id for outgoing notifications. +# default_publisher_id = image.localhost + +# Configuration options if sending notifications via rabbitmq (these are +# the defaults) +rabbit_host = localhost +rabbit_port = 5672 +rabbit_use_ssl = false +rabbit_userid = {{ RABBIT_USER }} +rabbit_password = {{ RABBIT_PASS }} +rabbit_virtual_host = / +rabbit_notification_exchange = glance +rabbit_notification_topic = notifications +rabbit_durable_queues = False + +# Configuration options if sending notifications via Qpid (these are +# the defaults) +qpid_notification_exchange = glance +qpid_notification_topic = notifications +qpid_hostname = localhost +qpid_port = 5672 +qpid_username = +qpid_password = +qpid_sasl_mechanisms = +qpid_reconnect_timeout = 0 +qpid_reconnect_limit = 0 +qpid_reconnect_interval_min = 0 +qpid_reconnect_interval_max = 0 +qpid_reconnect_interval = 0 +qpid_heartbeat = 5 +# Set to 'ssl' to enable SSL +qpid_protocol = tcp +qpid_tcp_nodelay = True + +# ============ Filesystem Store Options ======================== + +# Directory that the Filesystem backend store +# writes image data to +# this option has been moved to [glance_store] for Juno release +# filesystem_store_datadir = /var/lib/glance/images/ + +# A list of directories where image data can be stored. +# This option may be specified multiple times for specifying multiple store +# directories. Either one of filesystem_store_datadirs or +# filesystem_store_datadir option is required. A priority number may be given +# after each directory entry, separated by a ":". +# When adding an image, the highest priority directory will be selected, unless +# there is not enough space available in cases where the image size is already +# known. If no priority is given, it is assumed to be zero and the directory +# will be considered for selection last. If multiple directories have the same +# priority, then the one with the most free space available is selected. +# If same store is specified multiple times then BadStoreConfiguration +# exception will be raised. +#filesystem_store_datadirs = /var/lib/glance/images/:1 + +# A path to a JSON file that contains metadata describing the storage +# system. When show_multiple_locations is True the information in this +# file will be returned with any location that is contained in this +# store. +#filesystem_store_metadata_file = None + +# ============ Swift Store Options ============================= + +# Version of the authentication service to use +# Valid versions are '2' for keystone and '1' for swauth and rackspace +swift_store_auth_version = 2 + +# Address where the Swift authentication service lives +# Valid schemes are 'http://' and 'https://' +# If no scheme specified, default to 'https://' +# For swauth, use something like '127.0.0.1:8080/v1.0/' +swift_store_auth_address = 127.0.0.1:5000/v2.0/ + +# User to authenticate against the Swift authentication service +# If you use Swift authentication service, set it to 'account':'user' +# where 'account' is a Swift storage account and 'user' +# is a user in that account +swift_store_user = jdoe:jdoe + +# Auth key for the user authenticating against the +# Swift authentication service +swift_store_key = a86850deb2742ec3cb41518e26aa2d89 + +# Container within the account that the account should use +# for storing images in Swift +swift_store_container = glance + +# Do we create the container if it does not exist? +swift_store_create_container_on_put = False + +# What size, in MB, should Glance start chunking image files +# and do a large object manifest in Swift? By default, this is +# the maximum object size in Swift, which is 5GB +swift_store_large_object_size = 5120 + +# When doing a large object manifest, what size, in MB, should +# Glance write chunks to Swift? This amount of data is written +# to a temporary disk buffer during the process of chunking +# the image file, and the default is 200MB +swift_store_large_object_chunk_size = 200 + +# Whether to use ServiceNET to communicate with the Swift storage servers. +# (If you aren't RACKSPACE, leave this False!) +# +# To use ServiceNET for authentication, prefix hostname of +# `swift_store_auth_address` with 'snet-'. +# Ex. https://example.com/v1.0/ -> https://snet-example.com/v1.0/ +swift_enable_snet = False + +# If set to True enables multi-tenant storage mode which causes Glance images +# to be stored in tenant specific Swift accounts. +#swift_store_multi_tenant = False + +# A list of swift ACL strings that will be applied as both read and +# write ACLs to the containers created by Glance in multi-tenant +# mode. This grants the specified tenants/users read and write access +# to all newly created image objects. The standard swift ACL string +# formats are allowed, including: +# <tenant_id>:<username> +# <tenant_name>:<username> +# *:<username> +# Multiple ACLs can be combined using a comma separated list, for +# example: swift_store_admin_tenants = service:glance,*:admin +#swift_store_admin_tenants = + +# The region of the swift endpoint to be used for single tenant. This setting +# is only necessary if the tenant has multiple swift endpoints. +#swift_store_region = + +# If set to False, disables SSL layer compression of https swift requests. +# Setting to 'False' may improve performance for images which are already +# in a compressed format, eg qcow2. If set to True, enables SSL layer +# compression (provided it is supported by the target swift proxy). +#swift_store_ssl_compression = True + +# The number of times a Swift download will be retried before the +# request fails +#swift_store_retry_get_count = 0 + +# ============ S3 Store Options ============================= + +# Address where the S3 authentication service lives +# Valid schemes are 'http://' and 'https://' +# If no scheme specified, default to 'http://' +s3_store_host = 127.0.0.1:8080/v1.0/ + +# User to authenticate against the S3 authentication service +s3_store_access_key = <20-char AWS access key> + +# Auth key for the user authenticating against the +# S3 authentication service +s3_store_secret_key = <40-char AWS secret key> + +# Container within the account that the account should use +# for storing images in S3. Note that S3 has a flat namespace, +# so you need a unique bucket name for your glance images. An +# easy way to do this is append your AWS access key to "glance". +# S3 buckets in AWS *must* be lowercased, so remember to lowercase +# your AWS access key if you use it in your bucket name below! +s3_store_bucket = <lowercased 20-char aws access key>glance + +# Do we create the bucket if it does not exist? +s3_store_create_bucket_on_put = False + +# When sending images to S3, the data will first be written to a +# temporary buffer on disk. By default the platform's temporary directory +# will be used. If required, an alternative directory can be specified here. +#s3_store_object_buffer_dir = /path/to/dir + +# When forming a bucket url, boto will either set the bucket name as the +# subdomain or as the first token of the path. Amazon's S3 service will +# accept it as the subdomain, but Swift's S3 middleware requires it be +# in the path. Set this to 'path' or 'subdomain' - defaults to 'subdomain'. +#s3_store_bucket_url_format = subdomain + +# ============ RBD Store Options ============================= + +# Ceph configuration file path +# If using cephx authentication, this file should +# include a reference to the right keyring +# in a client.<USER> section +#rbd_store_ceph_conf = /etc/ceph/ceph.conf + +# RADOS user to authenticate as (only applicable if using cephx) +# If <None>, a default will be chosen based on the client. section +# in rbd_store_ceph_conf +#rbd_store_user = <None> + +# RADOS pool in which images are stored +#rbd_store_pool = images + +# RADOS images will be chunked into objects of this size (in megabytes). +# For best performance, this should be a power of two +#rbd_store_chunk_size = 8 + +# ============ Sheepdog Store Options ============================= + +sheepdog_store_address = localhost + +sheepdog_store_port = 7000 + +# Images will be chunked into objects of this size (in megabytes). +# For best performance, this should be a power of two +sheepdog_store_chunk_size = 64 + +# ============ Cinder Store Options =============================== + +# Info to match when looking for cinder in the service catalog +# Format is : separated values of the form: +# <service_type>:<service_name>:<endpoint_type> (string value) +#cinder_catalog_info = volume:cinder:publicURL + +# Override service catalog lookup with template for cinder endpoint +# e.g. http://localhost:8776/v1/%(project_id)s (string value) +#cinder_endpoint_template = <None> + +# Region name of this node (string value) +#os_region_name = <None> + +# Location of ca certicates file to use for cinder client requests +# (string value) +#cinder_ca_certificates_file = <None> + +# Number of cinderclient retries on failed http calls (integer value) +#cinder_http_retries = 3 + +# Allow to perform insecure SSL requests to cinder (boolean value) +#cinder_api_insecure = False + +# ============ VMware Datastore Store Options ===================== + +# ESX/ESXi or vCenter Server target system. +# The server value can be an IP address or a DNS name +# e.g. 127.0.0.1, 127.0.0.1:443, www.vmware-infra.com +#vmware_server_host = <None> + +# Server username (string value) +#vmware_server_username = <None> + +# Server password (string value) +#vmware_server_password = <None> + +# Inventory path to a datacenter (string value) +# Value optional when vmware_server_ip is an ESX/ESXi host: if specified +# should be `ha-datacenter`. +#vmware_datacenter_path = <None> + +# Datastore associated with the datacenter (string value) +#vmware_datastore_name = <None> + +# The number of times we retry on failures +# e.g., socket error, etc (integer value) +#vmware_api_retry_count = 10 + +# The interval used for polling remote tasks +# invoked on VMware ESX/VC server in seconds (integer value) +#vmware_task_poll_interval = 5 + +# Absolute path of the folder containing the images in the datastore +# (string value) +#vmware_store_image_dir = /openstack_glance + +# Allow to perform insecure SSL requests to the target system (boolean value) +#vmware_api_insecure = False + +# ============ Delayed Delete Options ============================= + +# Turn on/off delayed delete +delayed_delete = False + +# Delayed delete time in seconds +scrub_time = 43200 + +# Directory that the scrubber will use to remind itself of what to delete +# Make sure this is also set in glance-scrubber.conf +scrubber_datadir = /var/lib/glance/scrubber + +# =============== Quota Options ================================== + +# The maximum number of image members allowed per image +#image_member_quota = 128 + +# The maximum number of image properties allowed per image +#image_property_quota = 128 + +# The maximum number of tags allowed per image +#image_tag_quota = 128 + +# The maximum number of locations allowed per image +#image_location_quota = 10 + +# Set a system wide quota for every user. This value is the total number +# of bytes that a user can use across all storage systems. A value of +# 0 means unlimited. +#user_storage_quota = 0 + +# =============== Image Cache Options ============================= + +# Base directory that the Image Cache uses +image_cache_dir = /var/lib/glance/image-cache/ + +# =============== Manager Options ================================= + +# DEPRECATED. TO BE REMOVED IN THE JUNO RELEASE. +# Whether or not to enforce that all DB tables have charset utf8. +# If your database tables do not have charset utf8 you will +# need to convert before this option is removed. This option is +# only relevant if your database engine is MySQL. +#db_enforce_mysql_charset = True + +# =============== Glance Store ==================================== +[glance_store] +# Moved from [DEFAULT], for Juno release +default_store = file +filesystem_store_datadir = /var/lib/glance/images/ + +# =============== Database Options ================================= + +[database] +# The file name to use with SQLite (string value) +sqlite_db = /var/lib/glance/glance.sqlite + +# If True, SQLite uses synchronous mode (boolean value) +#sqlite_synchronous = True + +# The backend to use for db (string value) +# Deprecated group/name - [DEFAULT]/db_backend +backend = sqlalchemy + +# The SQLAlchemy connection string used to connect to the +# database (string value) +# Deprecated group/name - [DEFAULT]/sql_connection +# Deprecated group/name - [DATABASE]/sql_connection +# Deprecated group/name - [sql]/connection +#connection = <None> +connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance + +# The SQL mode to be used for MySQL sessions. This option, +# including the default, overrides any server-set SQL mode. To +# use whatever SQL mode is set by the server configuration, +# set this to no value. Example: mysql_sql_mode= (string +# value) +#mysql_sql_mode = TRADITIONAL + +# Timeout before idle sql connections are reaped (integer +# value) +# Deprecated group/name - [DEFAULT]/sql_idle_timeout +# Deprecated group/name - [DATABASE]/sql_idle_timeout +# Deprecated group/name - [sql]/idle_timeout +#idle_timeout = 3600 + +# Minimum number of SQL connections to keep open in a pool +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_min_pool_size +# Deprecated group/name - [DATABASE]/sql_min_pool_size +#min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_pool_size +# Deprecated group/name - [DATABASE]/sql_max_pool_size +#max_pool_size = <None> + +# Maximum db connection retries during startup. (setting -1 +# implies an infinite retry count) (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_retries +# Deprecated group/name - [DATABASE]/sql_max_retries +#max_retries = 10 + +# Interval between retries of opening a sql connection +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_retry_interval +# Deprecated group/name - [DATABASE]/reconnect_interval +#retry_interval = 10 + +# If set, use this value for max_overflow with sqlalchemy +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_overflow +# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow +#max_overflow = <None> + +# Verbosity of SQL debugging information. 0=None, +# 100=Everything (integer value) +# Deprecated group/name - [DEFAULT]/sql_connection_debug +#connection_debug = 0 + +# Add python stack traces to SQL as comment strings (boolean +# value) +# Deprecated group/name - [DEFAULT]/sql_connection_trace +#connection_trace = False + +# If set, use this value for pool_timeout with sqlalchemy +# (integer value) +# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout +#pool_timeout = <None> + +# Enable the experimental use of database reconnect on +# connection lost (boolean value) +#use_db_reconnect = False + +# seconds between db connection retries (integer value) +#db_retry_interval = 1 + +# Whether to increase interval between db connection retries, +# up to db_max_retry_interval (boolean value) +#db_inc_retry_interval = True + +# max seconds between db connection retries, if +# db_inc_retry_interval is enabled (integer value) +#db_max_retry_interval = 10 + +# maximum db connection retries before error is raised. +# (setting -1 implies an infinite retry count) (integer value) +#db_max_retries = 20 + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = glance +admin_password = {{ GLANCE_PASS }} + +[paste_deploy] +# Name of the paste configuration file that defines the available pipelines +#config_file = glance-api-paste.ini + +# Partial name of a pipeline in your paste configuration file with the +# service name removed. For example, if your paste section name is +# [pipeline:glance-api-keystone], you would configure the flavor below +# as 'keystone'. +flavor= keystone + +[store_type_location_strategy] +# The scheme list to use to get store preference order. The scheme must be +# registered by one of the stores defined by the 'known_stores' config option. +# This option will be applied when you using 'store_type' option as image +# location strategy defined by the 'location_strategy' config option. +#store_type_preference = |