aboutsummaryrefslogtreecommitdiffstats
path: root/docs/testing/user/configguide/index.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/testing/user/configguide/index.rst')
-rw-r--r--docs/testing/user/configguide/index.rst167
1 files changed, 12 insertions, 155 deletions
diff --git a/docs/testing/user/configguide/index.rst b/docs/testing/user/configguide/index.rst
index 737f0ba7..69c41660 100644
--- a/docs/testing/user/configguide/index.rst
+++ b/docs/testing/user/configguide/index.rst
@@ -113,170 +113,23 @@ upstream communities.
The functional test cases are described in the Functest User Guide `[2]`_
-
-Prerequisites
-=============
-The OPNFV deployment is out of the scope of this document but it can be
-found in http://docs.opnfv.org.
-The OPNFV platform is considered as the SUT in this document.
-
-Several prerequisites are needed for Functest:
-
- #. A Jumphost to run Functest on
- #. A Docker daemon shall be installed on the Jumphost
- #. A public/external network created on the SUT
- #. An admin/management network created on the SUT
- #. Connectivity from the Jumphost to the SUT public/external network
- #. Connectivity from the Jumphost to the SUT admin/management network
-
-WARNING: Connectivity from Jumphost is essential and it is of paramount
-importance to make sure it is working before even considering to install
-and run Functest. Make also sure you understand how your networking is
-designed to work.
-
-NOTE: **Jumphost** refers to any server which meets the previous
-requirements. Normally it is the same server from where the OPNFV
-deployment has been triggered previously.
-
-NOTE: If your Jumphost is operating behind a company http proxy and/or
-firewall, please consult first the section `Proxy Support`_, towards
-the end of this document. The section details some tips/tricks which
-*may* be of help in a proxified environment.
-
-Docker installation
--------------------
-Docker installation and configuration is only needed to be done once
-through the life cycle of Jumphost.
-
-If your Jumphost is based on Ubuntu, SUSE, RHEL or CentOS linux, please
-consult the references below for more detailed instructions. The
-commands below are offered as a short reference.
-
-*Tip:* For running docker containers behind the proxy, you need first
-some extra configuration which is described in section
-`Docker Installation on CentOS behind http proxy`_. You should follow
-that section before installing the docker engine.
-
-Docker installation needs to be done as root user. You may use other
-userid's to create and run the actual containers later if so desired.
-Log on to your Jumphost as root user and install the Docker Engine
-(e.g. for CentOS family)::
-
- curl -sSL https://get.docker.com/ | sh
- systemctl start docker
-
- *Tip:* If you are working through proxy, please set the https_proxy
- environment variable first before executing the curl command.
-
-Add your user to docker group to be able to run commands without sudo::
-
- sudo usermod -aG docker <your_user>
-
-A reconnection is needed. There are 2 ways for this:
- #. Re-login to your account
- #. su - <username>
-
-References - Installing Docker Engine on different Linux Operating Systems:
- * Ubuntu_
- * RHEL_
- * CentOS_
- * SUSE_
-
-.. _Ubuntu: https://docs.docker.com/engine/installation/linux/ubuntulinux/
-.. _RHEL: https://docs.docker.com/engine/installation/linux/rhel/
-.. _CentOS: https://docs.docker.com/engine/installation/linux/centos/
-.. _SUSE: https://docs.docker.com/engine/installation/linux/suse/
-
-Public/External network on SUT
-------------------------------
-Some of the tests against the VIM (Virtual Infrastructure Manager) need
-connectivity through an existing public/external network in order to
-succeed. This is needed, for example, to create floating IPs to access
-VM instances through the public/external network (i.e. from the Docker
-container).
-
-By default, the four OPNFV installers provide a fresh installation with
-a public/external network created along with a router. Make sure that
-the public/external subnet is reachable from the Jumphost.
-
-*Hint:* For the given OPNFV Installer in use, the IP sub-net address
-used for the public/external network is usually a planning item and
-should thus be known. Consult the OPNFV Configuration guide `[4]`_, and
-ensure you can reach each node in the SUT, from the Jumphost using the
-'ping' command using the respective IP address on the public/external
-network for each node in the SUT. The details of how to determine the
-needed IP addresses for each node in the SUT may vary according to the
-used installer and are therefore ommitted here.
-
-Connectivity to Admin/Management network on SUT
------------------------------------------------
-Some of the Functest tools need to have access to the OpenStack
-admin/management network of the controllers `[1]`_.
-
-For this reason, check the connectivity from the Jumphost to all the
-controllers in cluster in the OpenStack admin/management network range.
-
-Installation and configuration
-==============================
+.. include:: ./prerequisites.rst
.. include:: ./configguide.rst
-Integration in CI
-=================
-In CI we use the Docker image and execute the appropriate commands within the
-container from Jenkins.
-
-Docker creation in set-functest-env builder `[3]`_::
-
- envs="-e INSTALLER_TYPE=${INSTALLER_TYPE} -e INSTALLER_IP=${INSTALLER_IP} -e NODE_NAME=${NODE_NAME}"
- [...]
- docker pull opnfv/functest:$DOCKER_TAG >/dev/null
- cmd="sudo docker run -id ${envs} ${volumes} ${custom_params} ${TESTCASE_OPTIONS} opnfv/functest:${DOCKER_TAG} /bin/bash"
- echo "Functest: Running docker run command: ${cmd}"
- ${cmd} >${redirect}
- sleep 5
- container_id=$(docker ps | grep "opnfv/functest:${DOCKER_TAG}" | awk '{print $1}' | head -1)
- echo "Container ID=${container_id}"
- if [ -z ${container_id} ]; then
- echo "Cannot find opnfv/functest container ID ${container_id}. Please check if it is existing."
- docker ps -a
- exit 1
- fi
- echo "Starting the container: docker start ${container_id}"
- docker start ${container_id}
- sleep 5
- docker ps >${redirect}
- if [ $(docker ps | grep "opnfv/functest:${DOCKER_TAG}" | wc -l) == 0 ]; then
- echo "The container opnfv/functest with ID=${container_id} has not been properly started. Exiting..."
- exit 1
- fi
-
- cmd="python ${FUNCTEST_REPO_DIR}/functest/ci/prepare_env.py start"
- echo "Executing command inside the docker: ${cmd}"
- docker exec ${container_id} ${cmd}
-
+.. include:: ./ci.rst
-Test execution in functest-all builder `[3]`_::
- branch=${GIT_BRANCH##*/}
- echo "Functest: run $FUNCTEST_SUITE_NAME on branch ${branch}"
- cmd="functest testcase run $FUNCTEST_SUITE_NAME"
- fi
- container_id=$(docker ps -a | grep opnfv/functest | awk '{print $1}' | head -1)
- docker exec $container_id $cmd
- ret_value=$?
- exit $ret_value
+References
+==========
-Docker clean in functest-cleanup builder `[3]`_ calling docker rm and docker rmi
+`[1]`_ : Keystone and public end point constraint
+`[2]`_ : Functest User guide
-References
-==========
-.. _`[1]`: https://ask.openstack.org/en/question/68144/keystone-unable-to-use-the-public-endpoint/
-.. _`[2]`: http://artifacts.opnfv.org/functest/docs/userguide/index.html
-.. _`[3]`: https://git.opnfv.org/cgit/releng/tree/jjb/functest/functest-ci-jobs.yml
-.. _`[4]`: http://artifacts.opnfv.org/functest/danube/docs/configguide/index.html
+`[3]`_ : Functest Jenkins jobs
+`[4]`_ : Functest Configuration guide
`OPNFV main site`_
@@ -284,5 +137,9 @@ References
IRC support channel: #opnfv-functest
+.. _`[1]`: https://ask.openstack.org/en/question/68144/keystone-unable-to-use-the-public-endpoint/
+.. _`[2]`: http://docs.opnfv.org/en/stable-danube/submodules/functest/docs/testing/user/userguide/index.html
+.. _`[3]`: https://git.opnfv.org/cgit/releng/tree/jjb/functest/functest-ci-jobs.yml
+.. _`[4]`: http://docs.opnfv.org/en/stable-danube/submodules/functest/docs/testing/user/configguide/index.html
.. _`OPNFV main site`: http://www.opnfv.org
.. _`Functest page`: https://wiki.opnfv.org/functest