aboutsummaryrefslogtreecommitdiffstats
path: root/docs/build-instruction.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/build-instruction.rst')
-rw-r--r--docs/build-instruction.rst314
1 files changed, 314 insertions, 0 deletions
diff --git a/docs/build-instruction.rst b/docs/build-instruction.rst
new file mode 100644
index 000000000..b7b13c896
--- /dev/null
+++ b/docs/build-instruction.rst
@@ -0,0 +1,314 @@
+============================================================================
+OPNFV Build instruction for the Fuel deployment tool
+============================================================================
+
+.. contents:: Table of Contents
+ :backlinks: none
+
+Abstract
+========
+
+This document describes how to build the Fuel deployment tool for the
+B release of OPNFV - the build system, dependencies and required
+system resources.
+
+
+License
+=======
+Brahmaputra release of OPNFV when using Fuel as a deployment tool DOCs (c) by Jonas Bjurel (Ericsson AB) and others.
+
+Brahmaputra release of OPNFV when using Fuel as a deployment tool DOCs (c) are licensed under a Creative Commons Attribution 4.0 International License. You should have received a copy of the license along with this. If not, see <http://creativecommons.org/licenses/by/4.0/>.
+
+
+
+Version history
+===============
+
++--------------------+--------------------+--------------------+----------------------+
+| **Date** | **Ver.** | **Author** | **Comment** |
+| | | | |
++--------------------+--------------------+--------------------+----------------------+
+| 2015-06-03 | 1.0.0 | Jonas Bjurel | Instruction for |
+| | | (Ericsson AB) | the Arno release |
++--------------------+--------------------+--------------------+----------------------+
+| 2015-09-24 | 1.1.0 | Jonas Bjurel | Instruction for |
+| | | (Ericsson AB) | the Arno SR1 release |
++--------------------+--------------------+--------------------+----------------------+
+| 2015-10-23 | 1.1.1 | Stefan Berg | Added instruction |
+| | | (Ericsson AB) | for proxy builds |
++--------------------+--------------------+--------------------+----------------------+
+| 2015-12-03 | 1.2.0 | Stefan Berg | Added instruction |
+| | | (Ericsson AB) | for plugin build |
+| | | | selection |
++--------------------+--------------------+--------------------+----------------------+
+
+Introduction
+============
+
+This document describes the build system used to build the Fuel
+deployment tool for the Brahmaputra release of OPNFV, required
+dependencies and minimum requirements on the host to be used for the
+buildsystem.
+
+The Fuel build system is desigened around Docker containers such that
+dependencies outside of the build system can be kept to a minimum. It
+also shields the host from any potential dangerous operations
+performed by the build system.
+
+The audience of this document is assumed to have good knowledge in
+network and Unix/Linux administration.
+
+Requirements
+============
+
+Minimum Hardware Requirements
+-----------------------------
+
+- An x86_64 host (Bare-metal or VM) with Ubuntu 14.04 LTS installed
+
+- ~30 GB available disc
+
+- 4 GB RAM
+
+Minimum Software Requirements
+-----------------------------
+
+The build host should run Ubuntu 14.04 operating system.
+
+On the host, the following packages must be installed:
+
+- docker - see https://docs.docker.com/installation/ubuntulinux/ for
+ installation notes for Ubuntu 14.04. Note: only use the Ubuntu stock
+ distro of Docker (docker.io)
+
+- git (simply available through sudo apt-get install git)
+
+- make (simply available through sudo apt-get install make)
+
+- curl (simply available through sudo apt-get install curl)
+
+Preparations
+------------
+
+Setting up the Docker build container
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+After having installed Docker, add yourself to the docker group:
+
+<usermod -a -G docker [userid]>
+
+Also make sure to define relevant DNS servers part of the global dns chain in
+in your </etc/default/docker> configuration file, for example:
+
+<DOCKER_OPTS=" --dns=8.8.8.8 --dns=8.8.8.4">
+
+Then restart docker:
+
+<sudo service docker.io restart>
+
+Setting up OPNFV Gerrit in order to being able to clone the code
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+- Start setting up OPNFV gerrit by creating a SSH key (unless you
+ don't already have one), create one with ssh-keygen
+
+- Add your generated public key in OPNFV Gerrit <https://gerrit.opnfv.org/>
+ (this requires a linuxfoundation account, create one if you do not
+ already have one)
+
+- Select "SSH Public Keys" to the left and then "Add Key" and paste
+ your public key in.
+
+Clone the OPNFV code Git repository with your SSH key
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Now it is time to clone the code repository:
+
+<git clone ssh://'Linux foundation user'@gerrit.opnfv.org:29418/fuel>
+
+Now you should have the OPNFV fuel repository with the Fuel
+directories stored locally on your build host.
+
+Check out the Brahmaputra release:
+<cd fuel>
+<git checkout insert-b-release-tag-here0>
+
+Clone the OPNFV code Git repository without a SSH key
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+You can also opt to clone the code repository without a SSH key:
+
+<git clone https://gerrit.opnfv.org:29418/gerrit/fuel>
+
+Make sure to checkout the release tag as described above.
+
+
+Building
+========
+
+There are two methods available for building Fuel:
+
+- A low level method using Make
+
+- An abstracted method using build.sh
+
+
+Support for building behind a http/https/rsync proxy
+----------------------------------------------------
+
+The build system is able to make use of a web proxy setup if the
+http_proxy, https_proxy, no_proxy (if needed) and RSYNC_PROXY or
+RSYNC_CONNECT_PROG environment variables have been set before invoking make.
+
+The proxy setup must permit port 80 (http), 443 (https) and 873
+(rsync).
+
+Important note about the host Docker daemon settings
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The Docker daemon on the host must be configured to use the http proxy
+for it to be able to pull the base Ubuntu 14.04 image from the Docker
+registry before invoking make! In Ubuntu this is done by adding a line
+like:
+
+export http_proxy="http://10.0.0.1:8888/"
+
+to /etc/default/docker and restarting the Docker daemon.
+
+Setting proxy environment variables prior to build
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The build system will make use the following environment variables
+that needs to be exported to subshells by using export (bash) or
+setenv (csh/tcsh).
+
+| http_proxy (or HTTP_PROXY)
+| https_proxy (or HTTP_PROXY)
+| no_proxy (or NO_PROXY)
+| RSYNC_PROXY
+| RSYNC_CONNECT_PROG
+
+As an example, these are the settings that were put in the user's
+.bashrc when verifying the proxy build functionality:
+
+| export RSYNC_PROXY=10.0.0.1:8888
+| export http_proxy=http://10.0.0.1:8888
+| export https_proxy=http://10.0.0.1:8888
+| export no_proxy=localhost,127.0.0.1,.consultron.com,.sock
+
+Using a ssh proxy for the rsync connection
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If the proxy setup is not allowing the rsync protocol, an alternative
+solution is to use a SSH tunnel to a machine capable of accessing the
+outbound port 873. Set the RSYNC_CONNECT_PROG according to the rsync
+manual page (for example to "ssh <username>@<hostname> nc %H 873") to enable
+this. Also note that netcat needs to be installed on the remote
+system!
+
+Make sure that the ssh command also refers to the user on the remote
+system, as the command itself will be run from the Docker build container
+as the root user (but with the invoking user's SSH keys).
+
+Disabling the Ubuntu repo cache if rsync is not allowed
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+During the build phase, a local Ubuntu package repository is fetched
+from upstream in order to be added to the OPNFV Fuel ISO and for parts
+of this process rsync is used.
+
+If neither of the two available methods for proxying rsync are
+available, the last resort is to turn off the caching of the Ubuntu
+packages in the build system. This is done by removing the
+"f_repobuild" from SUBDIRS in the beginning of
+the fuel/build/f_isoroot/Makefile.
+
+Note! Doing this will require the Fuel master node to have Internet
+access when installing the ISO artifact built as no Ubuntu package
+cache will be on the ISO!
+
+Configure your build environment
+-------------------------------------
+
+** Configuring the build environment should not be performed if building standard Brahmaputra release **
+
+Select the versions of the components you want to build by editing the fuel/build/config.mk file.
+
+Non official build: Selecting which plugins to build
+----------------------------------------------------
+In order to cut the build time for unofficial builds (made by an
+individual developer locally), the selection if which Fuel plugins to
+build (if any) can be done by environment variable
+"BUILD_FUEL_PLUGINS" prior to building.
+
+Only the plugin targets from fuel/build/f_isoroot/Makefile that are
+specified in the environment variable will then be built. In order to
+completely disable the building of plugins, the environment variable
+is set to " ". When using this functionality, the resulting iso file
+will be prepended with the prefix "unofficial-" to clearly indiciate
+that this is not a full build.
+
+This method of plugin selection is not meant to be used from within
+Gerrit!
+
+Low level build method using make
+---------------------------------
+The low level method is based on Make:
+
+From the <fuel/build> directory, invoke <make [target]>
+
+Following targets exist:
+
+- none/all - this will:
+
+ - If not already existing, initialize the docker build environment
+
+ - If not already done, build OpenDaylight from upstream (as defined
+ by fuel-build config-spec)
+
+ - If not already done, build fuel from upstream (as defined by
+ fuel-build/config-spec)
+
+ - Build the defined additions to fuel (as defined by the structure
+ of this framework)
+
+ - Apply changes and patches to fuel (as defined by the structure of
+ this framework)
+
+ - Reconstruct a fuel .iso image
+
+- clean - this will remove all artifacts from earlier builds.
+
+If the build is successful, you will find the generated ISO file in
+the <fuel/build/release> subdirectory!
+
+Abstracted build method using build.sh
+======================================
+The abstracted build method uses the <fuel/ci/build.sh> script which
+allows you to:
+
+- Create and use a build cache - significantly speeding up the
+ buildtime if upstream repositories have not changed.
+
+- push/pull cache and artifacts to an arbitrary URI (http(s):, file:, ftp:)
+
+For more info type <fuel/ci/build.sh -h>.
+
+Artifacts
+=========
+
+The artifacts produced are:
+
+- <OPNFV_XXXX.iso> - Which represents the bootable Fuel image, XXXX is
+ replaced with the build identity provided to the build system
+
+- <OPNFV_XXXX.iso.txt> - Which holds version metadata.
+
+References
+==========
+-
+
+:Authors: Jonas Bjurel (Ericsson), Stefan Berg (Ericsson)
+:Version: x.x.x
+
+**Documentation tracking**
+
+Revision: _sha1_
+
+Build date: _date_