summaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
authorJie Hu <hu.jie@zte.com.cn>2015-11-08 08:19:43 +0000
committerGerrit Code Review <gerrit@172.30.200.206>2015-11-08 08:19:43 +0000
commitc4611cc5b7523b99a0d24000002f154cccacf77c (patch)
tree48bdd4db4c9ecc7f5e859680cdfde601d3bd86bc /doc
parentf583cd77f01461eb4b715000d544c6f8d5a4f50c (diff)
parent287fe7dbb63e5beba773595238776cc74e64e32b (diff)
Merge "ESCALATOR-18: Use Cases"
Diffstat (limited to 'doc')
-rw-r--r--doc/04-Use_Cases_and_Scenarios.rst219
1 files changed, 199 insertions, 20 deletions
diff --git a/doc/04-Use_Cases_and_Scenarios.rst b/doc/04-Use_Cases_and_Scenarios.rst
index 13d16cf..ee9b488 100644
--- a/doc/04-Use_Cases_and_Scenarios.rst
+++ b/doc/04-Use_Cases_and_Scenarios.rst
@@ -1,32 +1,211 @@
Use Cases and Scenarios
-----------------------
-This section describes the use cases and scenarios to verify the
+This section describes the use cases and scenarios to verify the
requirements of Escalator.
-Upgrade a system with minimal configuration
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Scenarios
+~~~~~~~~~
+1. Upgrade a system with HA configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-A minimal configuration system is normally deployed for experimental or
-development usages, such as a OPNFV test bed. Although it dose not have
-large workload, but it is a typical system to be upgraded frequently.
+A HA configuration system is very popular in the operator's data centre.
+It is a typical product environment. It is always running 7\*24 with VNFs
+running on it to provide services to the end users.
-Upgrade a system with HA configuration
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-A HA configuration system is very popular in the operator's data centre.
-And it is a typical product environment. It always running 7 \* 24 a
-week with VNFs running on it to provide services to the end users.
+2. Upgrade a system with non-HA configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+A non-HA configuration system is normally deployed for experimental or
+development usages, such as a Vagrant/VM environment.
+
+Escalator supports the upgrade in this scenario, but it does not guarantee a
+smooth upgrade.
+
+Use cases
+~~~~~~~~~
+Use case #1: Smooth upgrade in a HA configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+For a system with HA configuration, the operator can use Escalator to
+smooth-upgrade NFVI/VIM components into a new version without any service
+outage.
+
+When a compute node being upgraded, the VMs on the node may need to be migrated
+to other compute nodes to avoid service outage, so it is requred that there are
+enough redundant resources to migrate VMs on this compute node.
+
+Before upgrade, the operator can use Escalator to check whether smooth upgrade
+conditions are all satisfied. These conditions include whether there are enough
+idle resources to migrate VMs during updrading, and whether the new version is
+compatible with the current one, etc. If there are some conditions not
+satisfied, Escalator will show them. Escalator can also provide the solutions if
+there is any, such as the number and configuration of spare compute nodes which
+are needed.
+
+When upgrade starts, Escalator will also automatically check whether smooth
+upgrade conditions are all satisfied. If some smooth upgrade conditions are not
+satisfied, Escalator will show the failure of smooth upgrade.
+
+- Pre-Conditions
+
+ 1. The system is running as normal.
+ 2. The VNFs are providing services as usual.
+
+- Upgrading steps
+
+ 1. The VNFs are continually providing services during the upgrade.
+ 2. The operator successfully logged in the GUI of Escalator to select the
+ software packages including Linux OS, Hypervisor, OpenStack, ODL and other
+ OPNFV components, ect. (All or part of components could be selected.)
+ 3. Select the nodes to be upgraded. i.e. controller node, network node,
+ storage node and compute node, etc.
+ 4. Select "Disable Scale-up". It will limit the scale-up operation when
+ upgrade is in progress to prevent failures due to the shortage of
+ resources.
+ 5. Select "Check Smooth Upgrade Conditions". If Escalator shows that there are
+ some conditions not satisfied, try to resolve them according to the
+ solutions provided.
+ 6. Select "Smooth Upgrade", then apply the upgrade operation.
+ 7. Select "Restore Scale-up" after the upgrade. It will restore scale-up to
+ the original enabled/disabled state before upgrade.
+
+- Post-Conditions
+
+ 1. The system is upgraded successfully.
+ 2. There is no service outage during the upgrade.
+ 3. The VNFs are providing services as usual after the upgrade.
+
+Use case #2: Roll-back after a failed smooth upgrade in a HA configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+For a system with HA configuration, if the upgrade fails when the operator is
+smooth-upgrading NFVI/VIM components into a new version using Escalator, the
+operator can roll-back the system without any service outage.
+
+- Pre-Conditions
+
+ 1. The system is running as normal.
+ 2. The VNFs are providing services as usual.
+ 3. Scale-up operation is disabled.
+ 4. Smooth upgrade failed.
+
+- Roll-back steps
+
+ 1. Escalator concludes that the upgrade has failed and provides the operator
+ with the reason.
+ 2. Select the "Roll-back" operation.
+ 3. If the roll-back is successful, go to step 4, otherwise the operator can
+ select "Restore Backup" to restore the system from the backup data.
+ 4. Select "Restore Scale-up" after the roll-back. It will restore scale-up to
+ the original enabled/disabled state before upgrade.
+
+- Post-Conditions
+
+ 1. The system is rolled-back successfully when the upgrade failed.
+ 2. There is no service outage during the roll-back.
+ 3. The VNFs are providing services as usual after the roll-back.
+
+Use case #3: Roll-back after a successful smooth upgrade in a HA configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+When a smooth upgrade in a HA configuration is successful, the operator may want
+to roll-back for some reasons, such as performance issues.
+Escalator supports roll-back after a successful smooth upgrade without any
+service outage.
+
+- Pre-Conditions
+
+ 1. The system is running as normal.
+ 2. The VNFs are providing services as usual.
+ 3. Smooth upgrade succeeded.
+
+- Roll-back steps
+
+ 1. Select "Disable Scale-up". It will limit the scale-up operation when roll-
+ back is in progress to prevent failures due to the shortage of resources.
+ 2. Select "Check Smooth Roll-back Conditions". If Escalator shows that there
+ are some conditions not satisfied, try to resolve them according to the
+ solutions provided.
+ 3. Select "Roll-back", then apply the roll-back operation.
+ 4. If the roll-back is successful, go to step 5, otherwise the operator can
+ select "Restore Backup" to restore the system from the backup data.
+ 5. Select "Restore Scale-up" after the roll-back. It will restore scale-up to
+ the original enabled/disabled state before roll-back.
+
+- Post-Conditions
+
+ 1. The system is rolled-back successfully.
+ 2. There is no service outage during the roll-back.
+ 3. The VNFs are providing services as usual after the roll-back.
+
+Use case #4: Non-smooth upgrade in a non-HA/HA configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+For a system with non-HA configuration, the operator can also use Escalator to
+upgrade NFVI/VIM components into a new version. In this case, the upgrade may
+result in service outage. In other words, the upgrade is non-smooth.
+For a system with HA configuration, if the service outage is acceptable or
+inevitable, the operator can also use Escalator to non-smoothly upgrade the
+system.
+
+- Pre-Conditions
+
+ 1. The system is running as normal.
+
+- Upgrading steps
+
+ 1. The operator successfully logged in the GUI of Escalator to select the
+ software packages including Linux OS, Hypervisor, OpenStack, ODL and other
+ OPNFV components, ect. (All or part of components could be selected.)
+ 2. Select the nodes to be upgraded. i.e. controller node, network node,
+ storage node and compute node, etc.
+ 3. Select "Non-Smooth Upgrade", then apply the upgrade operation.
+
+- Post-Conditions
+
+ 1. The system is upgraded successfully.
+
+Use case #5: Roll-back after a failed non-smooth upgrade in a non-HA/HA configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+For a system with non-HA/HA configuration, if the upgrade fails when the
+operator is non-smoothly upgrading NFVI/VIM components into a new version using
+Escalator, the operator can roll-back the system. In this case, the roll-back
+may result in service outage.
+
+- Pre-Conditions
+
+ 1. The system is running as normal.
+ 2. Non-smooth upgrade failed.
+
+- Roll-back steps
+
+ 1. Escalator concludes that the upgrade has failed and provides the operator
+ with the reason.
+ 2. Select the "Roll-back" operation.
+ 3. If the roll-back fails, the operator can select "Restore Backup" to restore
+ the system from the backup data.
+
+- Post-Conditions
+
+ 1. The system is rolled-back successfully when the upgrade failed.
+
+Use case #6: Roll-back after a successful non-smooth upgrade in a non-HA/HA configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+When a non-smooth upgrade in a non-HA/HA configuration is successful, the
+operator may want to roll-back for some reasons, such as performance issues.
+Escalator supports roll-back after a successful non-smooth upgrade. In this
+case,the roll-back may result in service outage.
+
+- Pre-Conditions
+
+ 1. The system is running as normal.
+ 2. Non-smooth upgrade succeeded.
+
+- Roll-back steps
-Upgrade a system with Multi-Site configuration
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 1. Select the "Roll-back" operation.
+ 2. If the roll-back fails, the operator can select "Restore Backup" to restore
+ the system from the backup data.
-Upgrade in one site may cause service interruption to other site, if
-both sites are depended and sharing the same modules/data base (e.g. a
-keystone for both sites).
+- Post-Conditions
-If a site failure during an upgrade, the roll-back missing any minimal
-state/data loss can cause an affect/failure to the depended site.
+ 1. The system is rolled-back successfully when the upgrade failed.
-.. <hujie> Consider one site of ARNO release first. Then, multi-site
- in the future. \ No newline at end of file