diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/testing/user/testspecification/highavailability/index.rst | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/docs/testing/user/testspecification/highavailability/index.rst b/docs/testing/user/testspecification/highavailability/index.rst index 280a241e..443abd0e 100644 --- a/docs/testing/user/testspecification/highavailability/index.rst +++ b/docs/testing/user/testspecification/highavailability/index.rst @@ -749,5 +749,155 @@ Post conditions Restart the processes of "haproxy" if they are not running. +---------------------------------------------------------------- +Test Case 9 - Controller node OpenStack service down - Database +---------------------------------------------------------------- +Short name +---------- + +dovetail.ha.database + +Use case specification +---------------------- + +This test case verifies that the high availability of the data base instances +used by OpenStack (mysql) on control node is working properly. +Specifically, this test case kills the processes of database service on a +selected control node, then checks whether the request of the related +OpenStack command is OK and the killed processes are recovered. + +Test preconditions +------------------ + +In this test case, an attacker called "kill-process" is needed. +This attacker includes three parameters: fault_type, process_name and host. + +The purpose of this attacker is to kill any process with a specific process +name which is run on the host node. In case that multiple processes use the +same name on the host node, all of them are going to be killed by this attacker. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Methodology for verifying service continuity and recovery +''''''''''''''''''''''''''''''''''''''''''''''''''''''''' + +In order to verify this service two different monitors are going to be used. + +As first monitor is used a OpenStack command and acts as watcher for +database connection of different OpenStack components. + +For second monitor is used a process monitor and the main purpose is to watch +whether the database processes on the host node are killed properly. + +Therefore, in this test case, there are two metrics: +- service_outage_time, which indicates the maximum outage time (seconds) + of the specified OpenStack command request +- process_recover_time, which indicates the maximum time (seconds) from the + process being killed to recovered + +Test execution +'''''''''''''' +* Test action 1: Connect to Node1 through SSH, and check that "database" + processes are running on Node1 +* Test action 2: Start two monitors: one for "database" processes on the host + node and the other for connection toward database from OpenStack + components, verifying the results of openstack image list, openstack router list, + openstack stack list and openstack volume list. + Each monitor will run as an independent process +* Test action 3: Connect to Node1 through SSH, and then kill the "mysql" + process(es) +* Test action 4: Stop monitors after a period of time specified by "waiting_time". + The monitor info will be aggregated. +* Test action 5: Verify the SLA and set the verdict of the test case to pass or fail. + + +Pass / fail criteria +'''''''''''''''''''' + +Check whether the SLA is passed: +- The process outage time is less than 30s. +- The service outage time is less than 5s. + +The database operations are carried out in above order and no errors occur. + +A negative result will be generated if the above is not met in completion. + +Post conditions +--------------- + +The database service is up and running again. +If the database service did not recover successfully by itself, +the test explicitly restarts the database service. + +--------------------------------------------------------------------------- +Test Case 10 - Controller node OpenStack service down - Controller Restart +--------------------------------------------------------------------------- + +Short name +---------- + +dovetail.ha.controller_restart + +Use case specification +---------------------- + +This test case verifies that the high availability of controller node is working +properly. +Specifically, this test case shutdowns a specified controller node via IPMI, +then checks whether all services provided by the controller node are OK with +some monitor tools. + +Test preconditions +------------------ + +In this test case, an attacker called "host-shutdown" is needed. +This attacker includes two parameters: fault_type and host. + +The purpose of this attacker is to shutdown a controller and check whether the +services are handled by this controller are still working normally. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Methodology for verifying service continuity and recovery +''''''''''''''''''''''''''''''''''''''''''''''''''''''''' + +In order to verify this service one monitor is going to be used. + +This monitor is using an OpenStack command and the respective command name of +the OpenStack component that we want to verify that the respective service is +still running normally. + +In this test case, there is one metric: 1)service_outage_time: which indicates +the maximum outage time (seconds) of the specified OpenStack command request. + +Test execution +'''''''''''''' +* Test action 1: Connect to Node1 through SSH, and check that controller services + are running normally +* Test action 2: Start monitors: each monitor will run as independently + process, monitoring the image list, router list, stack list and volume list accordingly. + The monitor info will be collected. +* Test action 3: Using the IPMI component, the Node1 is shut-down remotely. +* Test action 4: Stop monitors after a period of time specified by "waiting_time". + The monitor info will be aggregated. +* Test action 5: Verify the SLA and set the verdict of the test case to pass or fail. + + +Pass / fail criteria +'''''''''''''''''''' + +Check whether the SLA is passed: +- The process outage time is less than 30s. +- The service outage time is less than 5s. + +The controller operations are carried out in above order and no errors occur. + +A negative result will be generated if the above is not met in completion. + +Post conditions +--------------- +The controller has been restarted |