diff options
Diffstat (limited to 'docs/testing')
| -rw-r--r-- | docs/testing/user/instructionsperinstaller/testing_instructions_xci.rst | 220 | ||||
| -rw-r--r-- | docs/testing/user/userguide/testing_guide.rst | 7 |
2 files changed, 227 insertions, 0 deletions
diff --git a/docs/testing/user/instructionsperinstaller/testing_instructions_xci.rst b/docs/testing/user/instructionsperinstaller/testing_instructions_xci.rst new file mode 100644 index 00000000..017441f2 --- /dev/null +++ b/docs/testing/user/instructionsperinstaller/testing_instructions_xci.rst @@ -0,0 +1,220 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Huawei Technologies Co.,Ltd and others. + +=========================================================== +Conducting OVP Testing with Dovetail using XCI installer +=========================================================== + +Overview +------------------------------ +The purpose of this document is to give tips for the dovetail deployment +on XCI installer. +The general structure of the document is remaining according to the user guide +document and the XCI related tips will be added under of the respective +chapter's name. + +In order to deploy properly the XCI installer the below steps should be followed: + +1- The prerequisites of chapter 2.4.1 of XCI User Guide [1] should be applied. + +2- If you don’t have one already, generate an SSH key in $HOME/.ssh + ssh-keygen -t rsa + +3- Clone OPNFV releng-xci repository + +4- Change into directory where the sandbox script is located: + cd releng-xci/xci + +5- Set the sandbox flavor, OPNFV scenario, openstack version, VM size and releng_xci and bifrost versions: + + export INSTALLER_TYPE=osa + export XCI_FLAVOR=xxx ,chapter 2.3 of XCI User Guide [1] + (e.g. export XCI_FLAVOR=mini) + export DEPLOY_SCENARIO=yyy + (e.g. export DEPLOY_SCENARIO=os-nosdn-nofeature) + +6- Execute the sandbox script + ./xci-deploy.sh + +Once the deployement is successfully completed, the instructions below should be completed: + +1- You should access the OPNFV VM using ssh (ssh root@192.168.122.2) + +2- export DEPLOY_SCENARIO=yyy + +3- export PDF=/root/releng-xci/xci/var/pdf.yml + export IDF=/root/releng-xci/xci/var/idf.yml + source openrc + +4- Run the following ansible playbook script: + ansible-playbook -i releng-xci/xci/playbooks/dynamic_inventory.py releng-xci/xci/playbooks/prepare-tests.yml + +5- Run the following bash script: + ./prepare-tests.sh + + + +[1] https://docs.opnfv.org/en/latest/infrastructure/xci.html + + +Installing Dovetail +-------------------- + + +Checking the Test Host Readiness +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + +Installing Prerequisite Packages on the Test Host +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + +Configuring the Test Host Environment +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +In order to run the test scenarios properly and having access to all OS components +that each scenario needs, the undercloud credentials should be used and copied in the +docker container along with ssh key. + +The environment preparation should be applied on the Test Host environment. +Therefore, the containers which are going to be used as part of this configuration, +fetch the information, the files and the rest input from Test Host environment directly +as part of the Docker command. + +Setting up Primary Configuration File +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Two new environment variables could be introduced in the ``env_config.sh`` file. + + +.. code-block:: bash + + # For XCI installer the following environment parameters should be added in + # this file. Otherwise, those parameters could be ignored. + export INSTALLER_TYPE=osa + export DEPLOY_SCENARIO=os-nosdn-nofeature + export XCI_FLAVOR=noha + +The OS_PASSWORD and the rest credential details could be retrieved directly by openrc file in the OPNFV VM. + +Configuration for Running Tempest Test Cases (Mandatory) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +In order for Tempest Test cases to run properly, the ``$DOVETAIL_HOME/pre_config/tempest_conf.yaml`` +file should be updated, introducing the following configuration. + +service_available: + cinder: True + +Configuration for Running HA Test Cases (Mandatory) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Below is a sample of ``${DOVETAIL_HOME}/pre_config/pod.yaml`` file with +the required syntax when key_filename is used instead of password is employed +by the controller. +Moreover, the 'heat-admin' should be used as user. + +.. code-block:: bash + + nodes: + - + # This can not be changed and must be node0. + name: node0 + + # This must be Jumpserver. + role: Jumpserver + + # This is the instance IP of a node which has ipmitool installed. + ip: xx.xx.xx.xx + + # User name of the user of this node. This user **must** have sudo privileges. + user: root + + # Password of the user. + #password: root + key_filename: /root/.ssh/id_rsa + + - + # This can not be changed and must be node1. + name: node1 + + # This must be controller. + role: Controller + + # This is the instance IP of a controller node, which is the haproxy primary node + ip: xx.xx.xx.xx + + # User name of the user of this node. This user **must** have sudo privileges. + user: root + + # Password of the user. + #password: root + key_filename: /root/.ssh/id_rsa + + - + # This can not be changed and must be node2. + name: node2 + + # This must be Compute. + role: Compute + + # This is the instance IP of a controller node, which is the haproxy primary node + ip: xx.xx.xx.xx + + # User name of the user of this node. This user **must** have sudo privileges. + user: root + + # Password of the user. + #password: root + key_filename: /root/.ssh/id_rsa + + process_info: + - + # The default attack process of yardstick.ha.rabbitmq is 'rabbitmq-server'. + # Here can be reset to 'rabbitmq'. + testcase_name: yardstick.ha.rabbitmq + attack_process: rabbitmq + + - + # The default attack host for all HA test cases is 'node1'. + # Here can be reset to any other node given in the section 'nodes'. + testcase_name: yardstick.ha.glance_api + attack_host: node2 + +Note: The definition for each active controller and computer should be done in this file. + +Configuration of Hosts File (Optional) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + +Installing Dovetail on the Test Host +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + +Online Test Host +"""""""""""""""" + + +Offline Test Host +""""""""""""""""" + + +Starting Dovetail Docker +------------------------ + + +Running the OVP Test Suite +---------------------------- + + +Making Sense of OVP Test Results +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + +OVP Portal Web Interface +------------------------ + + +Updating Dovetail or a Test Suite +--------------------------------- diff --git a/docs/testing/user/userguide/testing_guide.rst b/docs/testing/user/userguide/testing_guide.rst index d28969d3..3f866c7d 100644 --- a/docs/testing/user/userguide/testing_guide.rst +++ b/docs/testing/user/userguide/testing_guide.rst @@ -231,6 +231,13 @@ this file should contain. # Otherwise, it will create a role 'Member' to do that. export NEW_USER_ROLE=xxx + # For XCI installer the following environment parameters should be added in + # this file. Otherwise, those parameters could be ignored. + export INSTALLER_TYPE=osa + export DEPLOY_SCENARIO=os-nosdn-nofeature + export XCI_FLAVOR=noha + + The OS_AUTH_URL variable is key to configure correctly, as the other admin services are collected from the identity service. HTTPS should be configured in the SUT so |