diff options
Diffstat (limited to 'docs/testing/user/testspecification/old_files/ipv6/ipv6_all_testcases.rst')
| -rw-r--r-- | docs/testing/user/testspecification/old_files/ipv6/ipv6_all_testcases.rst | 249 |
1 files changed, 249 insertions, 0 deletions
diff --git a/docs/testing/user/testspecification/old_files/ipv6/ipv6_all_testcases.rst b/docs/testing/user/testspecification/old_files/ipv6/ipv6_all_testcases.rst new file mode 100644 index 00000000..462219a8 --- /dev/null +++ b/docs/testing/user/testspecification/old_files/ipv6/ipv6_all_testcases.rst @@ -0,0 +1,249 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV + +================================================== +IPv6 Compliance Testing Methodology and Test Cases +================================================== + +IPv6 Compliance Testing focuses on overlay IPv6 capabilities, i.e. to validate that +IPv6 capability is supported in tenant networks, subnets and routers. Both Tempest API +testing and Tempest Scenario testing are reused as much as we can in IPv6 Compliance +Testing. In addition, Yardstick Test Case 027 is also used to validate a specific use case +of using a Service VM as an IPv6 vRouter. + +IPv6 Compliance Testing test cases are described as follows: + +--------------------------------------------------------------- +Test Case 1: Create and Delete an IPv6 Network, Port and Subnet +--------------------------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_network + tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_port + tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_subnet + +----------------------------------------------------------------- +Test Case 2: Create, Update and Delete an IPv6 Network and Subnet +----------------------------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_networks.NetworksIpV6Test.test_create_update_delete_network_subnet + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_create_update_delete_network_subnet + +---------------------------------------------- +Test Case 3: Check External Network Visibility +---------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_networks.NetworksIpV6Test.test_external_network_visibility + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_external_network_visibility + +------------------------------------------------------- +Test Case 4: List IPv6 Networks and Subnets of a Tenant +------------------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_networks.NetworksIpV6Test.test_list_networks + tempest.api.network.test_networks.NetworksIpV6Test.test_list_subnets + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_list_networks + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_list_subnets + +----------------------------------------------------------- +Test Case 5: Show Information of an IPv6 Network and Subnet +----------------------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_networks.NetworksIpV6Test.test_show_network + tempest.api.network.test_networks.NetworksIpV6Test.test_show_subnet + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_show_network + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_show_subnet + +------------------------------------------------------------ +Test Case 6: Create an IPv6 Port in Allowed Allocation Pools +------------------------------------------------------------ + +.. code-block:: bash + + tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_in_allowed_allocation_pools + +-------------------------------------------------------- +Test Case 7: Create an IPv6 Port without Security Groups +-------------------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_with_no_securitygroups + +--------------------------------------------------- +Test Case 8: Create, Update and Delete an IPv6 Port +--------------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_update_delete_port + +---------------------------------------- +Test Case 9: List IPv6 Ports of a Tenant +---------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_ports.PortsIpV6TestJSON.test_list_ports + +---------------------------------------------- +Test Case 10: Show Information of an IPv6 Port +---------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_ports.PortsIpV6TestJSON.test_show_port + +-------------------------------------------------------- +Test Case 11: Add Multiple Interfaces for an IPv6 Router +-------------------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_routers.RoutersIpV6Test.test_add_multiple_router_interfaces + +------------------------------------------------------------------ +Test Case 12: Add and Remove an IPv6 Router Interface with port_id +------------------------------------------------------------------ + +.. code-block:: bash + + tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_port_id + +-------------------------------------------------------------------- +Test Case 13: Add and Remove an IPv6 Router Interface with subnet_id +-------------------------------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_subnet_id + +------------------------------------------------------------------ +Test Case 14: Create, Update, Delete, List and Show an IPv6 Router +------------------------------------------------------------------ + +.. code-block:: bash + + tempest.api.network.test_routers.RoutersIpV6Test.test_create_show_list_update_delete_router + +-------------------------------------------------------------------------- +Test Case 15: Create, Update, Delete, List and Show an IPv6 Security Group +-------------------------------------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_list_update_show_delete_security_group + +---------------------------------------------------------- +Test Case 16: Create, Delete and Show Security Group Rules +---------------------------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_show_delete_security_group_rule + +-------------------------------------- +Test Case 17: List All Security Groups +-------------------------------------- + +.. code-block:: bash + + tempest.api.network.test_security_groups.SecGroupIPv6Test.test_list_security_groups + +-------------------------------------------------------- +Test Case 18: IPv6 Address Assignment - DHCPv6 Stateless +-------------------------------------------------------- + +.. code-block:: bash + + tempest.scenario.test_network_v6.TestGettingAddress.test_dhcp6_stateless_from_os + +-------------------------------------------------------------------- +Test Case 19: IPv6 Address Assignment - Dual Stack, DHCPv6 Stateless +-------------------------------------------------------------------- + +.. code-block:: bash + + tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_dhcp6_stateless_from_os + +--------------------------------------------------------------------------- +Test Case 20: IPv6 Address Assignment - Multiple Prefixes, DHCPv6 Stateless +--------------------------------------------------------------------------- + +.. code-block:: bash + + tempest.scenario.test_network_v6.TestGettingAddress.test_multi_prefix_dhcpv6_stateless + +--------------------------------------------------------------------------------------- +Test Case 21: IPv6 Address Assignment - Dual Stack, Multiple Prefixes, DHCPv6 Stateless +--------------------------------------------------------------------------------------- + +.. code-block:: bash + + tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_multi_prefix_dhcpv6_stateless + +--------------------------------------------- +Test Case 22: IPv6 Address Assignment - SLAAC +--------------------------------------------- + +.. code-block:: bash + + tempest.scenario.test_network_v6.TestGettingAddress.test_slaac_from_os + +--------------------------------------------------------- +Test Case 23: IPv6 Address Assignment - Dual Stack, SLAAC +--------------------------------------------------------- + +.. code-block:: bash + + tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_slaac_from_os + +---------------------------------------------------------------- +Test Case 24: IPv6 Address Assignment - Multiple Prefixes, SLAAC +---------------------------------------------------------------- + +.. code-block:: bash + + tempest.scenario.test_network_v6.TestGettingAddress.test_multi_prefix_slaac + +---------------------------------------------------------------------------- +Test Case 25: IPv6 Address Assignment - Dual Stack, Multiple Prefixes, SLAAC +---------------------------------------------------------------------------- + +.. code-block:: bash + + tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_multi_prefix_slaac + +------------------------------------------- +Test Case 26: Service VM as an IPv6 vRouter +------------------------------------------- + +.. code-block:: bash + + # Refer to Yardstick Test Case 027 + # Instruction: http://artifacts.opnfv.org/ipv6/docs/configurationguide/index.html + # Step 1: Set up Service VM as an IPv6 vRouter + # 1.1: Install OPNFV and Preparation + # 1.2: Disable Security Groups in OpenStack ML2 Setup + # 1.3: Create IPv4 and IPv6 Neutron routers, networks and subnets + # 1.4: Boot vRouter VM, and Guest VM1 and Guest VM2 + # Step 2: Verify IPv6 Connectivity + # 2.1: ssh to Guest VM1 + # 2.2: Ping6 from Guest VM1 to Guest VM2 + # 2.3: Ping6 from Guest VM1 to vRouter VM + # 2.4: Ping6 from Guest VM1 to Neutron IPv6 Router Namespace + # Step 3: Tear down Setup + # 3.1: Delete Guest VM1, Guest VM2 and vRouter VM + # 3.2: Delete IPv4 and IPv6 Neutron routers, networks and subnets + # 3.3: Enable Security Groups + |