4 files changed, 0 insertions, 297 deletions
diff --git a/docs/development/manuals/get-valid-server-state.rst b/docs/development/manuals/get-valid-server-state.rst
deleted file mode 100644
index 824ea3c2..00000000
--- a/docs/development/manuals/get-valid-server-state.rst
+++ /dev/null
@@ -1,125 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-
-======================
-Get valid server state
-======================
-
-Related Blueprints:
-===================
-
-https://blueprints.launchpad.net/nova/+spec/get-valid-server-state
-
-Problem description
-===================
-
-Previously when the owner of a VM has queried his VMs, he has not received
-enough state information, states have not changed fast enough in the VIM and
-they have not been accurate in some scenarios. With this change this gap is now
-closed.
-
-A typical case is that, in case of a fault of a host, the user of a high
-availability service running on top of that host, needs to make an immediate
-switch over from the faulty host to an active standby host. Now, if the compute
-host is forced down [1] as a result of that fault, the user has to be notified
-about this state change such that the user can react accordingly. Similarly,
-a change of the host state to "maintenance" should also be notified to the
-users.
-
-What is changed
-===============
-
-A new ``host_status`` parameter is added to the ``/servers/{server_id}`` and
-``/servers/detail`` endpoints in microversion 2.16. By this new parameter
-user can get additional state information about the host.
-
-``host_status`` possible values where next value in list can override the
-previous:
-
-- ``UP`` if nova-compute is up.
-- ``UNKNOWN`` if nova-compute status was not reported by servicegroup driver
-  within configured time period. Default is within 60 seconds,
-  but can be changed with ``service_down_time`` in nova.conf.
-- ``DOWN`` if nova-compute was forced down.
-- ``MAINTENANCE`` if nova-compute was disabled. MAINTENANCE in API directly
-  means nova-compute service is disabled. Different wording is used to avoid
-  the impression that the whole host is down, as only scheduling of new VMs
-  is disabled.
-- Empty string indicates there is no host for server.
-
-``host_status`` is returned in the response in case the policy permits. By
-default the policy is for admin only in Nova policy.json::
-
-  "os_compute_api:servers:show:host_status": "rule:admin_api"
-
-For an NFV use case this has to also be enabled for the owner of the VM::
-
-  "os_compute_api:servers:show:host_status": "rule:admin_or_owner"
-
-REST API examples:
-==================
-
-Case where nova-compute is enabled and reporting normally::
-
-    GET /v2.1/{tenant_id}/servers/{server_id}
-
-    200 OK
-    {
-      "server": {
-        "host_status": "UP",
-        ...
-      }
-    }
-
-Case where nova-compute is enabled, but not reporting normally::
-
-    GET /v2.1/{tenant_id}/servers/{server_id}
-
-    200 OK
-    {
-      "server": {
-        "host_status": "UNKNOWN",
-        ...
-      }
-    }
-
-Case where nova-compute is enabled, but forced_down::
-
-    GET /v2.1/{tenant_id}/servers/{server_id}
-
-    200 OK
-    {
-      "server": {
-        "host_status": "DOWN",
-        ...
-      }
-    }
-
-Case where nova-compute is disabled::
-
-    GET /v2.1/{tenant_id}/servers/{server_id}
-
-    200 OK
-    {
-      "server": {
-        "host_status": "MAINTENANCE",
-        ...
-      }
-    }
-
-Host Status is also visible in python-novaclient::
-
-  +-------+------+--------+------------+-------------+----------+-------------+
-  | ID    | Name | Status | Task State | Power State | Networks | Host Status |
-  +-------+------+--------+------------+-------------+----------+-------------+
-  | 9a... | vm1  | ACTIVE | -          | RUNNING     | xnet=... | UP          |
-  +-------+------+--------+------------+-------------+----------+-------------+
-
-Links:
-======
-
-[1] Manual for OpenStack NOVA API for marking host down
-http://artifacts.opnfv.org/doctor/docs/manuals/mark-host-down_manual.html
-
-[2] OpenStack compute manual page
-http://developer.openstack.org/api-ref-compute-v2.1.html#compute-v2.1
diff --git a/docs/development/manuals/index.rst b/docs/development/manuals/index.rst
deleted file mode 100644
index f705f94a..00000000
--- a/docs/development/manuals/index.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-
-.. _doctor-manuals:
-
-*******
-Manuals
-*******
-
-.. toctree::
-
-.. include:: mark-host-down_manual.rst
-.. include:: get-valid-server-state.rst
diff --git a/docs/development/manuals/mark-host-down_manual.rst b/docs/development/manuals/mark-host-down_manual.rst
deleted file mode 100644
index 3815205d..00000000
--- a/docs/development/manuals/mark-host-down_manual.rst
+++ /dev/null
@@ -1,122 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-
-=========================================
-OpenStack NOVA API for marking host down.
-=========================================
-
-Related Blueprints:
-===================
-
-  https://blueprints.launchpad.net/nova/+spec/mark-host-down
-  https://blueprints.launchpad.net/python-novaclient/+spec/support-force-down-service
-
-What the API is for
-===================
-
-  This API will give external fault monitoring system a possibility of telling
-  OpenStack Nova fast that compute host is down. This will immediately enable
-  calling of evacuation of any VM on host and further enabling faster HA
-  actions.
-
-What this API does
-==================
-
-  In OpenStack the nova-compute service state can represent the compute host
-  state and this new API is used to force this service down. It is assumed
-  that the one calling this API has made sure the host is also fenced or
-  powered down. This is important, so there is no chance same VM instance will
-  appear twice in case evacuated to new compute host. When host is recovered
-  by any means, the external system is responsible of calling the API again to
-  disable forced_down flag and let the host nova-compute service report again
-  host being up. If network fenced host come up again it should not boot VMs
-  it had if figuring out they are evacuated to other compute host. The
-  decision of deleting or booting VMs there used to be on host should be
-  enhanced later to be more reliable by Nova blueprint:
-  https://blueprints.launchpad.net/nova/+spec/robustify-evacuate
-
-REST API for forcing down:
-==========================
-
-  Parameter explanations:
-  tenant_id:       Identifier of the tenant.
-  binary:          Compute service binary name.
-  host:            Compute host name.
-  forced_down:     Compute service forced down flag.
-  token:           Token received after successful authentication.
-  service_host_ip: Serving controller node ip.
-
-  request:
-  PUT /v2.1/{tenant_id}/os-services/force-down
-  {
-  "binary": "nova-compute",
-  "host": "compute1",
-  "forced_down": true
-  }
-
-  response:
-  200 OK
-  {
-  "service": {
-  "host": "compute1",
-  "binary": "nova-compute",
-  "forced_down": true
-  }
-  }
-
-  Example:
-  curl -g -i -X PUT http://{service_host_ip}:8774/v2.1/{tenant_id}/os-services
-  /force-down -H "Content-Type: application/json" -H "Accept: application/json
-  " -H "X-OpenStack-Nova-API-Version: 2.11" -H "X-Auth-Token: {token}" -d '{"b
-  inary": "nova-compute", "host": "compute1", "forced_down": true}'
-
-CLI for forcing down:
-=====================
-
-  nova service-force-down <hostname> nova-compute
-
-  Example:
-  nova service-force-down compute1 nova-compute
-
-REST API for disabling forced down:
-===================================
-
-  Parameter explanations:
-  tenant_id:       Identifier of the tenant.
-  binary:          Compute service binary name.
-  host:            Compute host name.
-  forced_down:     Compute service forced down flag.
-  token:           Token received after successful authentication.
-  service_host_ip: Serving controller node ip.
-
-  request:
-  PUT /v2.1/{tenant_id}/os-services/force-down
-  {
-  "binary": "nova-compute",
-  "host": "compute1",
-  "forced_down": false
-  }
-
-  response:
-  200 OK
-  {
-  "service": {
-  "host": "compute1",
-  "binary": "nova-compute",
-  "forced_down": false
-  }
-  }
-
-  Example:
-  curl -g -i -X PUT http://{service_host_ip}:8774/v2.1/{tenant_id}/os-services
-  /force-down -H "Content-Type: application/json" -H "Accept: application/json
-  " -H "X-OpenStack-Nova-API-Version: 2.11" -H "X-Auth-Token: {token}" -d '{"b
-  inary": "nova-compute", "host": "compute1", "forced_down": false}'
-
-CLI for disabling forced down:
-==============================
-
-  nova service-force-down --unset <hostname> nova-compute
-
-  Example:
-  nova service-force-down --unset compute1 nova-compute
diff --git a/docs/development/manuals/monitors.rst b/docs/development/manuals/monitors.rst
deleted file mode 100644
index eeb5e226..00000000
--- a/docs/development/manuals/monitors.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-
-Monitor Types and Limitations
-=============================
-
-Currently there are two monitor types supported: sample and collectd
-
-Sample Monitor
---------------
-
-Sample monitor type pings the compute host from the control host and calculates the
-notification time after the ping timeout.
-Also if inspector type is sample, the compute node needs to communicate with the control
-node on port 12345. This port needs to be opened for incomming traffic on control node.
-
-Collectd Monitor
-----------------
-
-Collectd monitor type uses collectd daemon running ovs_events plugin. Collectd runs on
-compute to send instant notification to the control node. The notification time is
-calculated by using the difference of time at which compute node sends notification to
-control node and the time at which consumer is notified. The time on control and compute
-node has to be synchronized for this reason. For further details on setting up collectd
-on the compute node, use the following link:
-:doc:`<barometer:release/userguide/feature.userguide>`
-
-
-Collectd monitors an interface managed by OVS. If the interface is not be assigned
-an IP, the user has to provide the name of interface to be monitored. The command to
-launch the doctor test in that case is:
-MONITOR_TYPE=collectd INSPECTOR_TYPE=sample INTERFACE_NAME=example_iface ./run.sh
-
-If the interface name or IP is not provided, the collectd monitor type will monitor the
-default management interface. This may result in the failure of doctor run.sh test case.
-The test case sets the monitored interface down and if the inspector (sample or congress)
-is running on the same subnet, collectd monitor will not be able to communicate with it.