diff options
Diffstat (limited to 'docs/configguide/postinstall.rst')
| -rw-r--r-- | docs/configguide/postinstall.rst | 230 |
1 files changed, 38 insertions, 192 deletions
diff --git a/docs/configguide/postinstall.rst b/docs/configguide/postinstall.rst index 9252d95..69c38c3 100644 --- a/docs/configguide/postinstall.rst +++ b/docs/configguide/postinstall.rst @@ -1,212 +1,58 @@ Copper post installation procedures =================================== -This release focused on use of the OpenStack Congress service for managing -configuration policy. The Congress install verify procedure described here -is largely manual. This procedure, as well as the longer-term goal of -automated verification support, is a work in progress. The procedure is -further specific to one OPNFV installer (JOID, i.e. MAAS/JuJu) based -environment. -Automated post installation activities --------------------------------------- -No automated procedures are provided at this time. +This section describes optional procedures for verifying that the Congress +service is operational, and additional test tools developed for the Colorado +release. -Copper post configuration procedures ------------------------------------- -No configuration procedures are required beyond the basic install procedure. +Copper functional tests +----------------------- -Platform components validation ------------------------------- +This release includes the following test cases which are integrated into OPNFV +Functest for the JOID and Apex installers: + * DMZ Placement: dmz.sh + * SMTP Ingress: smtp_ingress.sh + * Reserved Subnet: reserved_subnet.sh -Following are notes on creating a container as test driver for Congress. -This is based upon an Ubuntu host as installed by JOID. +These scripts, related scripts that clean up the OpenStack environment afterward, +and a combined test runner (run.sh) are in the Copper repo under the "tests" +folder. Instructions for using the tests are provided as script comments. -Create and Activate the Container -................................. -On the jumphost: +Further description of the tests is provided on the Copper wiki at +https://wiki.opnfv.org/display/copper/testing. -.. code:: - sudo lxc-create -n trusty-copper -t /usr/share/lxc/templates/lxc-ubuntu \ - -- -b ubuntu ~/opnfv - sudo lxc-start -n trusty-copper -d - sudo lxc-info --name trusty-copper - (typical output) - Name: trusty-copper - State: RUNNING - PID: 4563 - IP: 10.0.3.44 - CPU use: 28.77 seconds - BlkIO use: 522.79 MiB - Memory use: 559.75 MiB - KMem use: 0 bytes - Link: vethDMFOAN - TX bytes: 2.62 MiB - RX bytes: 88.48 MiB - Total bytes: 91.10 MiB - -Login and configure the test server -................................... +Congress test webapp +-------------------- -.. code:: +This release also provides a webapp that can be automatically installed in a +docker container on the jumphost. This script is in the Copper repo at: + * components/congress/test-webapp/setup/install_congress_testserver.sh - ssh ubuntu@10.0.3.44 - sudo apt-get update - sudo apt-get upgrade -y - - # Install pip - sudo apt-get install python-pip -y - - # Install java - sudo apt-get install default-jre -y - - # Install other dependencies - sudo apt-get install git gcc python-dev libxml2 libxslt1-dev \ - libzip-dev php5-curl -y - - # Setup OpenStack environment variables per your OPNFV install - export CONGRESS_HOST=192.168.10.117 - export KEYSTONE_HOST=192.168.10.108 - export CEILOMETER_HOST=192.168.10.105 - export CINDER_HOST=192.168.10.101 - export GLANCE_HOST=192.168.10.106 - export HEAT_HOST=192.168.10.107 - export NEUTRON_HOST=192.168.10.111 - export NOVA_HOST=192.168.10.112 - source ~/admin-openrc.sh - - # Install and test OpenStack client - mkdir ~/git - cd git - git clone https://github.com/openstack/python-openstackclient.git - cd python-openstackclient - git checkout stable/liberty - sudo pip install -r requirements.txt - sudo python setup.py install - openstack service list - (typical output) - +----------------------------------+------------+----------------+ - | ID | Name | Type | - +----------------------------------+------------+----------------+ - | 2f8799ae50f24c928c021fabf8a50f5f | keystone | identity | - | 351b13f56d9a4e25849406ec1d5a2726 | cinder | volume | - | 5129510c3143454f9ba8ec7e6735e267 | cinderv2 | volumev2 | - | 5ee1e220460f41dea9be06921400ce9b | congress | policy | - | 78e73a7789a14f56a5d248a0cd141201 | quantum | network | - | 9d5a00fb475a45b2ae6767528299ed6b | ceilometer | metering | - | 9e4b1624ef0b434abc0b82f607c5045c | heat | orchestration | - | b6c01ceb5023442d9f394b83f2a18e01 | heat-cfn | cloudformation | - | ba6199e3505045ad87e2a7175bd0c57f | glance | image | - | d753f304a0d541dbb989780ae70328a8 | nova | compute | - +----------------------------------+------------+----------------+ - - # Install and test Congress client - cd ~/git - git clone https://github.com/openstack/python-congressclient.git - cd python-congressclient - git checkout stable/liberty - sudo pip install -r requirements.txt - sudo python setup.py install - openstack congress driver list - (typical output) - +------------+--------------------------------------------------------------------------+ - | id | description | - +------------+--------------------------------------------------------------------------+ - | ceilometer | Datasource driver that interfaces with ceilometer. | - | neutronv2 | Datasource driver that interfaces with OpenStack Networking aka Neutron. | - | nova | Datasource driver that interfaces with OpenStack Compute aka nova. | - | keystone | Datasource driver that interfaces with keystone. | - | cinder | Datasource driver that interfaces with OpenStack cinder. | - | glancev2 | Datasource driver that interfaces with OpenStack Images aka Glance. | - +------------+--------------------------------------------------------------------------+ - - # Install and test Glance client - cd ~/git - git clone https://github.com/openstack/python-glanceclient.git - cd python-glanceclient - git checkout stable/liberty - sudo pip install -r requirements.txt - sudo python setup.py install - glance image-list - (typical output) - +--------------------------------------+---------------------+ - | ID | Name | - +--------------------------------------+---------------------+ - | 6ce4433e-65c0-4cd8-958d-b06e30c76241 | cirros-0.3.3-x86_64 | - +--------------------------------------+---------------------+ - - # Install and test Neutron client - cd ~/git - git clone https://github.com/openstack/python-neutronclient.git - cd python-neutronclient - git checkout stable/liberty - sudo pip install -r requirements.txt - sudo python setup.py install - neutron net-list - (typical output) - +--------------------------------------+----------+------------------------------------------------------+ - | id | name | subnets | - +--------------------------------------+----------+------------------------------------------------------+ - | dc6227df-af41-439f-bd2c-c2c2f0fe7fc5 | public | 5745846c-dd79-4900-a7da-bf506348ceac 192.168.10.0/24 | - | a3f9f13a-5de9-4d3b-98c8-d2e40a2ef8e9 | internal | 5e0be862-90da-44ab-af43-56d5c65aa049 10.0.0.0/24 | - +--------------------------------------+----------+------------------------------------------------------+ - - # Install and test Nova client - cd ~/git - git clone https://github.com/openstack/python-novaclient.git - cd python-novaclient - git checkout stable/liberty - sudo pip install -r requirements.txt - sudo python setup.py install - nova hypervisor-list - (typical output) - +----+---------------------+-------+---------+ - | ID | Hypervisor hostname | State | Status | - +----+---------------------+-------+---------+ - | 1 | compute1.maas | up | enabled | - +----+---------------------+-------+---------+ - - # Install and test Keystone client - cd ~/git - git clone https://github.com/openstack/python-keystoneclient.git - cd python-keystoneclient - git checkout stable/liberty - sudo pip install -r requirements.txt - sudo python setup.py install - -Setup the Congress Test Webapp -.............................. +Prerequisites to using this script: + * OPFNV installed per JOID or Apex installer + * For Apex installs, on the jumphost, ssh to the undercloud VM and "su stack" -.. code:: +To invoke the procedure, enter the following shell commands, optionally +specifying the branch identifier to use for Copper. - # Clone Copper (if not already cloned in user home) - cd ~/git - if [ ! -d ~/git/copper ]; then \ - git clone https://gerrit.opnfv.org/gerrit/copper; fi +.. code:: - # Copy the Apache config - sudo cp ~/git/copper/components/congress/test-webapp/www/ubuntu-apache2.conf \ - /etc/apache2/apache2.conf +wget https://git.opnfv.org/cgit/copper/plain/components/congress/test-webapp/setup/install_congress_testserver.sh +bash install_congress_testserver.sh [copper-branch] - # Point proxy.php to the Congress server per your install - sed -i -- "s/192.168.10.117/$CONGRESS_HOST/g" \ - ~/git/copper/components/congress/test-webapp/www/html/proxy/index.php +Using the test webapp +..................... - # Copy the webapp to the Apache root directory and fix permissions - sudo cp -R ~/git/copper/components/congress/test-webapp/www/html /var/www - sudo chmod 755 /var/www/html -R +Browse to the webapp IP address provided at the end of the install +procedure. - # Make webapp log directory and set permissions - mkdir ~/logs - chmod 777 ~/logs +Interactive options are meant to be self-explanatory given a basic familiarity +with the Congress service and data model. - # Restart Apache - sudo service apache2 restart +Removing the test webapp +........................ -Using the Test Webapp -..................... -Browse to the trusty-copper server IP address. +The webapp can be removed by running this script from the Copper repo: + * components/congress/test-webapp/setup/clean_congress_testserver.sh -Interactive options are meant to be self-explanatory given a basic familiarity -with the Congress service and data model. -But the app will be developed with additional features and UI elements. |