diff options
Diffstat (limited to 'components/congress/install/bash/install_congress_2.sh')
| -rw-r--r-- | components/congress/install/bash/install_congress_2.sh | 198 |
1 files changed, 97 insertions, 101 deletions
diff --git a/components/congress/install/bash/install_congress_2.sh b/components/congress/install/bash/install_congress_2.sh index ce192c9..c71f6ec 100644 --- a/components/congress/install/bash/install_congress_2.sh +++ b/components/congress/install/bash/install_congress_2.sh @@ -1,5 +1,5 @@ #!/bin/bash -# Copyright 2015-2016 AT&T Intellectual Property, Inc +# Copyright 2015-2017 AT&T Intellectual Property, Inc # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -13,144 +13,138 @@ # See the License for the specific language governing permissions and # limitations under the License. # -# This is script 2 of 2 for installation of Congress on the OPNFV Controller -# node as installed via JOID or Apex (Fuel and Compass not yet verified). +# This is script 2 of 2 for installation of OpenStack Congress. This install +# procedure is intended to deploy Congress for testing purposes only. # Prerequisites: -# - OPFNV installed via JOID or Apex -# - For Apex installs, on the jumphost, ssh to the undercloud VM and -# $ su stack -# - For JOID installs, admin-openrc.sh saved from Horizon to ~/admin-openrc.sh -# - Retrieve the copper install script as below, optionally specifying the -# branch to use as a URL parameter, e.g. ?h=stable%2Fbrahmaputra -# $ cd ~ -# $ wget https://git.opnfv.org/cgit/copper/plain/components/congress/install/bash/install_congress_1.sh -# $ wget https://git.opnfv.org/cgit/copper/plain/components/congress/install/bash/install_congress_2.sh -# $ bash install_congress_1.sh [openstack-branch] -# optionally specifying the branch identifier to use for OpenStack +# - OpenStack base deployment. +# Usage: +# $ bash install_congress_2.sh <target> [branch] +# <target>: IP/hostname where Congress is being installed +# branch: branch identifier to use for OpenStack # -set -x +trap 'fail' ERR -sudo -i +pass() { + echo "$0: $(date) Install Succeeded!" + exit 0 +} -if [ $# -eq 1 ]; then osbranch=$1; fi +fail() { + echo "$0: $(date) Install Failed!" + exit 1 +} -echo "OS-specific prerequisite steps" -dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'` +set -x -if [ "$dist" == "Ubuntu" ]; then - # Ubuntu - echo "Ubuntu-based install" - export CTLUSER="ubuntu" - source ~/congress/admin-openrc.sh - source ~/congress/env.sh - echo "Update/upgrade package repos" - apt-get update - echo "install pip" - apt-get install python-pip -y - echo "install java" - apt-get install default-jre -y - echo "install other dependencies" - apt-get install apg git gcc python-dev libxml2 libxslt1-dev libzip-dev -y - pip install --upgrade pip virtualenv setuptools pbr tox - echo "set mysql root user password and install mysql" - export MYSQL_PASSWORD=$(/usr/bin/apg -n 1 -m 16 -c cl_seed) - debconf-set-selections <<< 'mysql-server mysql-server/root_password password '$MYSQL_PASSWORD - debconf-set-selections <<< 'mysql-server mysql-server/root_password_again password '$MYSQL_PASSWORD - -E apt-get -q -y install mysql-server python-mysqldb - echo "install tox dependencies (detected by errors during 'tox -egenconfig')" - apt-get install libffi-dev openssl libssl-dev -y -else - # Centos - echo "Centos-based install" - export CTLUSER="heat-admin" - source ~/congress/admin-openrc.sh - source ~/congress/env.sh - echo "install pip" - yum install python-pip -y - echo "install other dependencies" - yum install apg git gcc libxml2 python-devel libzip-devel libxslt-devel -y - pip install --upgrade pip virtualenv setuptools pbr tox - echo "install tox dependencies (detected by errors during 'tox -egenconfig')" - yum install libffi-devel openssl openssl-devel -y +if [[ ! -f /.dockerenv ]]; then + sudo -i + mkdir /opt/congress fi -echo "Clone congress" -cd ~/congress +target=$1 +branch=$2 + +cd /opt/congress +source admin-openrc.sh + +echo "$0: $(date) OS-specific prerequisite steps" +dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'` + +echo "$0: $(date) Update/upgrade package repos" +apt-get update +echo "$0: $(date) install pip" +apt-get install python-pip -y +apt-get install python3-pip -y +echo "$0: $(date) install java" +apt-get install default-jre -y +echo "$0: $(date) install other dependencies" +apt-get install apg git gcc python-dev libxml2 libxslt1-dev libzip-dev build-essential libssl-dev libffi-dev -y +# pip install --upgrade pip setuptools pbr +echo "$0: $(date) set mysql root user password" +export MYSQL_PASSWORD=$(/usr/bin/apg -n 1 -m 16 -c cl_seed) +debconf-set-selections <<< 'mysql-server mysql-server/root_password password '$MYSQL_PASSWORD +debconf-set-selections <<< 'mysql-server mysql-server/root_password_again password '$MYSQL_PASSWORD +apt-get -q -y install mysql-server python-mysqldb +service mysql restart + +echo "$0: $(date) Clone congress" +cd /opt/congress git clone https://github.com/openstack/congress.git cd congress -if [ $# -eq 1 ]; then git checkout $1; fi +if [ $# -eq 1 ]; then git checkout $branch; fi -echo "Install OpenStack client" -cd ~/congress -git clone https://github.com/openstack/python-openstackclient.git -cd python-openstackclient -if [ $# -eq 1 ]; then git checkout $1; fi -pip install -r requirements.txt +echo "$0: $(date) install Congress code and dependencies" +cd /opt/congress/congress pip install . +python setup.py install -echo "Setup Congress" -cd ~/congress/congress +echo "$0: $(date) Setup Congress" mkdir -p /etc/congress -chown $CTLUSER /etc/congress mkdir -p /etc/congress/snapshot mkdir /var/log/congress -chown $CTLUSER /var/log/congress cp etc/api-paste.ini /etc/congress cp etc/policy.json /etc/congress -echo "install dependencies of Congress" -cd ~/congress/congress -pip install -r requirements.txt -pip install . - -echo "install tox" -pip install tox +#echo "$0: $(date) generate congress.conf.sample" +# TODO: tox can't be used for now due to exception with setuptools +# when trying to install pyparsing +#pip install tox +#tox -egenconfig +# For now, using a pre-generated congress.conf.sample as part of the +# Models repo. -echo "generate congress.conf.sample" -tox -egenconfig +cp /opt/congress/congress.conf.sample etc/congress.conf.sample -echo "edit congress.conf.sample as needed" +echo "$0: $(date) edit congress.conf.sample as needed" sed -i -- 's/#verbose = true/verbose = true/g' etc/congress.conf.sample sed -i -- 's/#log_file = <None>/log_file = congress.log/g' etc/congress.conf.sample sed -i -- 's/#log_dir = <None>/log_dir = \/var\/log\/congress/g' etc/congress.conf.sample -sed -i -- 's/#bind_host = 0.0.0.0/bind_host = '$CONGRESS_HOST'/g' etc/congress.conf.sample +sed -i -- 's/#bind_host = 0.0.0.0/bind_host = '$target'/g' etc/congress.conf.sample sed -i -- 's/#policy_path = <None>/policy_path = \/etc\/congress\/snapshot/g' etc/congress.conf.sample +# TODO: verify keystone auth strategy sed -i -- 's/#auth_strategy = keystone/auth_strategy = noauth/g' etc/congress.conf.sample -sed -i -- 's/#drivers =/drivers = congress.datasources.neutronv2_driver.NeutronV2Driver,congress.datasources.glancev2_driver.GlanceV2Driver,congress.datasources.nova_driver.NovaDriver,congress.datasources.keystone_driver.KeystoneDriver,congress.datasources.ceilometer_driver.CeilometerDriver,congress.datasources.cinder_driver.CinderDriver/g' etc/congress.conf.sample -sed -i -- 's/#auth_host = 127.0.0.1/auth_host = '$CONGRESS_HOST'/g' etc/congress.conf.sample -sed -i -- 's/#auth_port = 35357/auth_port = 35357/g' etc/congress.conf.sample -sed -i -- 's/#auth_protocol = https/auth_protocol = http/g' etc/congress.conf.sample -sed -i -- 's/#admin_tenant_name = admin/admin_tenant_name = admin/g' etc/congress.conf.sample -sed -i -- 's/#admin_user = <None>/admin_user = congress/g' etc/congress.conf.sample -sed -i -- 's/#admin_password = <None>/admin_password = congress/g' etc/congress.conf.sample -sed -i -- 's/#connection = <None>/connection = mysql:\/\/congress@localhost:3306\/congress/g' etc/congress.conf.sample - -echo "copy congress.conf.sample to /etc/congress" +sed -i -- "s/connection = mysql+pymysql:\/\/root:secret@127.0.0.1\/congress?charset=utf8/connection = mysql+pymysql:\/\/root:$MYSQL_PASSWORD@127.0.0.1\/congress?charset=utf8/" etc/congress.conf.sample +sed -i -- 's/#drivers = /drivers = congress.datasources.neutronv2_driver.NeutronV2Driver, congress.datasources.glancev2_driver.GlanceV2Driver, congress.datasources.nova_driver.NovaDriver, congress.datasources.keystone_driver.KeystoneDriver, congress.datasources.ceilometer_driver.CeilometerDriver, congress.datasources.cinder_driver.CinderDriver, congress.datasources.swift_driver.SwiftDriver, congress.datasources.heatv1_driver.HeatV1Driver\n#drivers = /' etc/congress.conf.sample + +# TODO: find out how to get the Rabbit user, password, and host address +rabbit_ip=$(openstack endpoint show nova | awk "/ internalurl / { print \$4 }" | awk -F'[/]' '{print $3}' | awk -F'[:]' '{print $1}') +sed -i -- "s~#transport_url = <None>~transport_url = rabbit://guest:guest@$rabbit_ip:5672~" etc/congress.conf.sample + +echo "$0: $(date) copy congress.conf.sample to /etc/congress" cp etc/congress.conf.sample /etc/congress/congress.conf -echo "create congress database" -mysql -e "CREATE DATABASE congress; GRANT ALL PRIVILEGES ON congress.* TO 'congress';" +echo "$0: $(date) create congress database" +mysql --password=$MYSQL_PASSWORD -e "CREATE DATABASE congress; CREATE USER 'congress'; GRANT ALL PRIVILEGES ON congress.* TO 'congress';" -echo "install congress-db-manage dependencies (detected by errors)" -if [ "$dist" == "Ubuntu" ]; then apt-get build-dep python-mysqldb -y; fi -pip install MySQL-python +echo "$0: $(date) install congress-db-manage dependencies (detected by errors)" +apt-get build-dep python-mysqldb -y +pip install MySQL-python PyMySQL -echo "create database schema" +echo "$0: $(date) create database schema" congress-db-manage --config-file /etc/congress/congress.conf upgrade head -echo "Install Congress client" -cd ~/congress +echo "$0: $(date) Install congress client" +cd /opt/congress git clone https://github.com/openstack/python-congressclient.git cd python-congressclient -if [ $# -eq 1 ]; then git checkout $1; fi -pip install -r requirements.txt +if [ $# -eq 1 ]; then git checkout $branch; fi pip install . # Fix error found during startup of congress server -echo "Install python fixtures" +echo "$0: $(date) Install python fixtures" pip install fixtures +echo "$0: $(date) Install OpenStack client" +cd /opt/congress +git clone https://github.com/openstack/python-openstackclient.git +cd python-openstackclient +if [ $# -eq 1 ]; then git checkout $branch; fi +# TODO: fix this workaround - setuptools fails +# "Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-JWTiHZ/pyparsing/" +# run it twice, turn off fail trap +pip install . + # TODO: The rest of this script is not yet tested function _congress_setup_horizon { local HORIZON_DIR="/usr/share/openstack-dashboard" @@ -165,7 +159,7 @@ function _congress_setup_horizon { cp $CONGRESS_HORIZON_DIR/_70_datasources.py $HORIZON_DIR/openstack_dashboard/local/enabled/ # For unit tests - sh -c 'echo "python-congressclient" >> '$HORIZON_DIR'/requirements.txt' + sh -c 'echo "$0: $(date) python-congressclient" >> '$HORIZON_DIR'/requirements.txt' sh -c 'echo -e \ "\n# Load the pluggable dashboard settings"\ "\nimport openstack_dashboard.local.enabled"\ @@ -191,7 +185,9 @@ function _congress_setup_horizon { service apache2 restart } # Commented out as the procedure is not yet working -#echo "Install Horizon Policy plugin" +#echo "$0: $(date) Install Horizon Policy plugin" #_congress_setup_horizon +pass set +x #echo off +pass |